Add support for Brillo Partitioning Tool
Use the gpt image created by bpttool from device-partitions.bpt file.
The provision script is updated accordingly.
Change-Id: Id4b90ba86a8feae6ade6a6e1d700986eaff031dc
Tracked-On: https://jira01.devtools.intel.com/browse/BP-379
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Stefan Stanacar <stefan.stanacar@intel.com>
diff --git a/BoardConfig.mk b/BoardConfig.mk
index 6fa83a1..a4270cf 100644
--- a/BoardConfig.mk
+++ b/BoardConfig.mk
@@ -42,8 +42,7 @@
BOARD_HAVE_BLUETOOTH_LINUX := true
-# NOTE: These values must be kept in sync with BOARD_GPT_INI
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 268435456
+BOARD_SYSTEMIMAGE_PARTITION_SIZE := 536870912
BOARD_BOOTLOADER_PARTITION_SIZE := 20971520
BOARD_USERDATAIMAGE_PARTITION_SIZE := 536870912
TARGET_USERIMAGES_USE_EXT4 := true
@@ -77,6 +76,8 @@
# on the first pass for make and to thus get around a build system bug.
BOARD_SEPOLICY_DIRS := $(BOARD_SEPOLICY_DIRS) device/intel/minnowboard/sepolicy
+BOARD_BPT_INPUT_FILES += device/intel/minnowboard/device-partitions.bpt
+
vendor_partition_directory := vendor/bsp/intel/minnowboard
PRODUCT_COPY_FILES += \
@@ -85,7 +86,6 @@
ifeq ($(BOOTLOADER_USE_PREBUILT),false)
PRODUCT_COPY_FILES += \
- $(vendor_partition_directory)/boot_binaries/gpt.bin:gpt.bin \
$(vendor_partition_directory)/boot_binaries/oemvars.txt:oemvars.txt
endif
@@ -93,7 +93,6 @@
$(vendor_partition_directory)/boot_binaries:bootloader \
$(vendor_partition_directory)/boot_binaries:fastboot-usb.img \
$(vendor_partition_directory)/boot_binaries:oemvars.txt \
- $(vendor_partition_directory)/boot_binaries:gpt.bin \
$(vendor_partition_directory)/boot_binaries:README
# Must defined at the end of the file
diff --git a/build/tasks/flashfiles.mk b/build/tasks/flashfiles.mk
index 9527331..ec49379 100644
--- a/build/tasks/flashfiles.mk
+++ b/build/tasks/flashfiles.mk
@@ -29,11 +29,11 @@
MINNOWBOARD_DEVICE := device/intel/minnowboard
MINNOWBOARD_TOOLS := $(MINNOWBOARD_DEVICE)/flash_tools
-MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_BINARIES)/gpt.bin
MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_BINARIES)/bootloader
MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_BINARIES)/oemvars.txt
MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_TOOLS)/brillo-flashall.sh
MINNOWBOARD_FLASHFILES += $(MINNOWBOARD_TOOLS)/README
+MINNOWBOARD_FLASHFILES += $(PRODUCT_OUT)/partition-table.img
MINNOWBOARD_FLASHFILES += $(PRODUCT_OUT)/boot.img
MINNOWBOARD_FLASHFILES += $(PRODUCT_OUT)/system.img
MINNOWBOARD_FLASHFILES += $(PRODUCT_OUT)/userdata.img
diff --git a/device-partitions.bpt b/device-partitions.bpt
new file mode 100644
index 0000000..ceb99b0
--- /dev/null
+++ b/device-partitions.bpt
@@ -0,0 +1,14 @@
+{
+ "partitions": [
+ {
+ "label": "bootloader",
+ "size": "20 MiB",
+ "type_guid": "linux_fs"
+ },
+ {
+ "label": "bootloader2",
+ "size": "20 MiB",
+ "type_guid": "linux_fs"
+ }
+ ]
+}
diff --git a/flash_tools/brillo-flashall.sh b/flash_tools/brillo-flashall.sh
index 4719e3f..f2d74b7 100755
--- a/flash_tools/brillo-flashall.sh
+++ b/flash_tools/brillo-flashall.sh
@@ -60,8 +60,25 @@
FASTBOOT=fastboot
fi
+#
+# Due to possible changes in the u-boot version, we might have some
+# issues flashing gpt or recognizing the _a/_b partitions. If we do
+# have a failure, we must first re-flash bootloader and reboot to the
+# updated version
+set +e
+fastboot flash gpt "${OS}"/partition-table.img "$@"
+bootloader_rc=$?
+fastboot flash boot_a "${OS}"/boot.img "$@"
+boota_rc=$?
+if [ $bootloader_rc -ne 0 -o $boota_rc -ne 0 ]; then
+ fastboot flash bootloader "${VENDOR}"/bootloader \
+ reboot bootloader \
+ "$@"
+fi
+
+set -e
${FASTBOOT} \
- flash gpt "${VENDOR}"/gpt.bin \
+ flash gpt "${OS}"/partition-table.img \
flash bootloader "${VENDOR}"/bootloader \
flash boot_a "${OS}"/boot.img \
flash boot_b "${OS}"/boot.img \
@@ -69,7 +86,8 @@
flash system_b "${OS}"/system.img \
flash userdata "${OS}"/userdata.img \
flash oemvars "${VENDOR}"/oemvars.txt \
- oem set_active 0 "$@"
+ set_active _a \
+ "$@"
echo "Please run the following command to restart your MinnowBoard"
echo " ${FASTBOOT} $@ reboot"
