MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/usb_host/example_enum/enum/device/usb_specific_request.c

/* This source file is part of the AVR Software Framework 2.0.0 release */

/*This file is prepared for Doxygen automatic documentation generation.*/
/*! \file ******************************************************************
 *
 * \brief Processing of USB device specific enumeration requests.
 *
 * This file contains the specific request decoding for enumeration process.
 *
 * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
 * - Supported devices:  All AVR32 devices with a USB module can be used.
 * - AppNote:
 *
 * \author               Atmel Corporation: http://www.atmel.com \n
 *                       Support and FAQ: http://support.atmel.no/
 *
 ***************************************************************************/

/* Copyright (c) 2009 Atmel Corporation. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * 3. The name of Atmel may not be used to endorse or promote products derived
 * from this software without specific prior written permission.
 *
 * 4. This software may only be redistributed and used in connection with an Atmel
 * AVR product.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
 *
 */

//_____ I N C L U D E S ____________________________________________________

#include "conf_usb.h"


#if USB_DEVICE_FEATURE == ENABLED

#include "usb_drv.h"
#include "usb_descriptors.h"
#include "usb_standard_request.h"
#include "usb_specific_request.h"


//_____ M A C R O S ________________________________________________________


//_____ D E F I N I T I O N S ______________________________________________


//_____ P R I V A T E   D E C L A R A T I O N S ____________________________

extern const  void *pbuffer;
extern        U16   data_to_transfer;


//_____ D E C L A R A T I O N S ____________________________________________

//! @brief This function configures the endpoints of the device application.
//! This function is called when the set configuration request has been received.
//!
void usb_user_endpoint_init(U8 conf_nb)
{

#if (USB_HIGH_SPEED_SUPPORT==ENABLED)
   if( !Is_usb_full_speed_mode() )
   {
  (void)Usb_configure_endpoint(EP_TEMP_IN,
                               EP_ATTRIBUTES_TEMP1,
                               DIRECTION_IN,
                               EP_SIZE_TEMP1_HS,
                               DOUBLE_BANK);

  (void)Usb_configure_endpoint(EP_TEMP_OUT,
                               EP_ATTRIBUTES_TEMP2,
                               DIRECTION_OUT,
                               EP_SIZE_TEMP2_HS,
                               DOUBLE_BANK);
      return;
   }
#endif
  (void)Usb_configure_endpoint(EP_TEMP_IN,
                               EP_ATTRIBUTES_TEMP1,
                               DIRECTION_IN,
                               EP_SIZE_TEMP1,
                               DOUBLE_BANK);

  (void)Usb_configure_endpoint(EP_TEMP_OUT,
                               EP_ATTRIBUTES_TEMP2,
                               DIRECTION_OUT,
                               EP_SIZE_TEMP2,
                               DOUBLE_BANK);
}


//! This function is called by the standard USB read request function when
//! the USB request is not supported. This function returns TRUE when the
//! request is processed. This function returns FALSE if the request is not
//! supported. In this case, a STALL handshake will be automatically
//! sent by the standard USB read request function.
//!
Bool usb_user_read_request(U8 type, U8 request)
{
  U8 descriptor_type;
  U8 string_type;

  string_type     = Usb_read_endpoint_data(EP_CONTROL, 8);
  descriptor_type = Usb_read_endpoint_data(EP_CONTROL, 8);

  switch (request)
  {
  case GET_DESCRIPTOR:
    switch (descriptor_type)
    {
    default:
      break;
    }
    break;

  case SET_CONFIGURATION:
    switch (descriptor_type)
    {
    default:
      break;
    }
    break;

  default:
    break;
  }

  return FALSE;
}


//! This function returns the size and the pointer on a user information
//! structure
//!
Bool usb_user_get_descriptor(U8 type, U8 string)
{
  pbuffer = NULL;

  switch (type)
  {
  case STRING_DESCRIPTOR:
    switch (string)
    {
    case LANG_ID:
      data_to_transfer = sizeof(usb_user_language_id);
      pbuffer = &usb_user_language_id;
      break;

    case MAN_INDEX:
      data_to_transfer = sizeof(usb_user_manufacturer_string_descriptor);
      pbuffer = &usb_user_manufacturer_string_descriptor;
      break;

    case PROD_INDEX:
      data_to_transfer = sizeof(usb_user_product_string_descriptor);
      pbuffer = &usb_user_product_string_descriptor;
      break;

    case SN_INDEX:
      data_to_transfer = sizeof(usb_user_serial_number);
      pbuffer = &usb_user_serial_number;
      break;

    default:
      break;
    }
    break;

  default:
    break;
  }

  return pbuffer != NULL;
}


#endif  // USB_DEVICE_FEATURE == ENABLED