/** | |
* \file | |
* | |
* \brief USB configuration file | |
* | |
* Copyright (C) 2009 Atmel Corporation. All rights reserved. | |
* | |
* \page License | |
* | |
* Redistribution and use in source and binary forms, with or without | |
* modification, are permitted provided that the following conditions are met: | |
* | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* | |
* 3. The name of Atmel may not be used to endorse or promote products derived | |
* from this software without specific prior written permission. | |
* | |
* 4. This software may only be redistributed and used in connection with an | |
* Atmel AVR product. | |
* | |
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY | |
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH | |
* DAMAGE. | |
*/ | |
#ifndef _CONF_USB_H_ | |
#define _CONF_USB_H_ | |
#include "compiler.h" | |
/** | |
* USB Device Configuration | |
* @{ | |
*/ | |
//! Device definition (mandatory) | |
#define USB_DEVICE_VENDOR_ID USB_VID_ATMEL | |
#define USB_DEVICE_PRODUCT_ID USB_PID_ATMEL_AVR_MSC_HIDS_CDC | |
#define USB_DEVICE_MAJOR_VERSION 1 | |
#define USB_DEVICE_MINOR_VERSION 0 | |
#define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA) | |
#define USB_DEVICE_ATTR \ | |
(USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED) | |
// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED) | |
// (USB_CONFIG_ATTR_SELF_POWERED) | |
// (USB_CONFIG_ATTR_BUS_POWERED) | |
//! USB Device string definitions (Optional) | |
#define USB_DEVICE_MANUFACTURE_NAME "ATMEL AVR" | |
#define USB_DEVICE_PRODUCT_NAME "HID Mouse, keyboard, CDC and MSC" | |
#define USB_DEVICE_SERIAL_NAME "123123123123" // Disk SN for MSC | |
/** | |
* Device speeds support | |
* @{ | |
*/ | |
//! To define a Low speed device | |
//#define USB_DEVICE_LOW_SPEED | |
//! To authorize the High speed | |
#if (UC3A3||UC3A4) | |
#define USB_DEVICE_HS_SUPPORT | |
#endif | |
//@} | |
/** | |
* USB Device Callbacks definitions (Optional) | |
* @{ | |
*/ | |
#define UDC_VBUS_EVENT(b_vbus_high) main_vbus_action(b_vbus_high) | |
#define UDC_SOF_EVENT() main_sof_action() | |
#define UDC_SUSPEND_EVENT() main_suspend_action() | |
#define UDC_RESUME_EVENT() main_resume_action() | |
//! Mandatory when USB_DEVICE_ATTR authorizes remote wakeup feature | |
#define UDC_REMOTEWAKEUP_ENABLE() main_remotewakeup_enable() | |
#define UDC_REMOTEWAKEUP_DISABLE() main_remotewakeup_disable() | |
//! When a extra string descriptor must be supported | |
//! other than manufacturer, product and serial string | |
#define UDC_GET_EXTRA_STRING() main_extra_string() | |
//@} | |
/** | |
* USB Device low level configuration | |
* When only one interface is used, these configurations are defined by the class module. | |
* For composite device, these configuration must be defined here | |
* @{ | |
*/ | |
//! Control endpoint size | |
#define USB_DEVICE_EP_CTRL_SIZE 64 | |
//! Two interfaces for this device (CDC + MSC + HID mouse + HID keyboard) | |
#define USB_DEVICE_NB_INTERFACE 5 | |
//! 7 endpoints used by HID mouse, HID keyboard, CDC and MSC interfaces | |
//! but an IN and OUT endpoints can be defined with the same number on xmega, thus 5 | |
// (1 | USB_EP_DIR_IN) // CDC Notify endpoint | |
// (2 | USB_EP_DIR_IN) // CDC TX | |
// (2 | USB_EP_DIR_OUT) // CDC RX | |
// (3 | USB_EP_DIR_IN) // MSC IN | |
// (3 | USB_EP_DIR_OUT) // MSC OUT | |
// (4 | USB_EP_DIR_IN) // HID mouse report | |
// (5 | USB_EP_DIR_IN) // HID keyboard report | |
#define USB_DEVICE_MAX_EP 5 | |
//@} | |
//@} | |
/** | |
* USB Interface Configuration | |
* @{ | |
*/ | |
/** | |
* Configuration of CDC interface | |
* @{ | |
*/ | |
//! Interface callback definition | |
#define UDI_CDC_ENABLE_EXT() main_cdc_enable() | |
#define UDI_CDC_DISABLE_EXT() main_cdc_disable() | |
#define UDI_CDC_SET_CODING_EXT(cfg) main_cdc_config_uart(cfg) | |
#define UDI_CDC_SET_DTR_EXT(set) main_cdc_set_dtr(set) | |
#define UDI_CDC_SET_RTS_EXT(set) | |
//! Default configuration of communication port | |
#define UDI_CDC_DEFAULT_RATE 115200 | |
#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1 | |
#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE | |
#define UDI_CDC_DEFAULT_DATABITS 8 | |
//! Enable id string of interface to add an extra USB string | |
#define UDI_CDC_IAD_STRING_ID 4 | |
/** | |
* USB CDC low level configuration | |
* In standalone these configurations are defined by the CDC module. | |
* For composite device, these configuration must be defined here | |
* @{ | |
*/ | |
//! Endpoint numbers definition | |
#define UDI_CDC_COMM_EP (1 | USB_EP_DIR_IN) // Notify endpoint | |
#define UDI_CDC_DATA_EP_IN (2 | USB_EP_DIR_IN) // TX | |
#define UDI_CDC_DATA_EP_OUT (2 | USB_EP_DIR_OUT) // RX | |
//! Interface numbers | |
#define UDI_CDC_COMM_IFACE_NUMBER 0 | |
#define UDI_CDC_DATA_IFACE_NUMBER 1 | |
//@} | |
//@} | |
/** | |
* Configuration of MSC interface | |
* @{ | |
*/ | |
//! Vendor name and Product version of MSC interface | |
#define UDI_MSC_GLOBAL_VENDOR_ID \ | |
'A', 'T', 'M', 'E', 'L', ' ', ' ', ' ' | |
#define UDI_MSC_GLOBAL_PRODUCT_VERSION \ | |
'1', '.', '0', '0' | |
//! Interface callback definition | |
#define UDI_MSC_ENABLE_EXT() main_msc_enable() | |
#define UDI_MSC_DISABLE_EXT() main_msc_disable() | |
//! Enable id string of interface to add an extra USB string | |
#define UDI_MSC_STRING_ID 5 | |
/** | |
* USB MSC low level configuration | |
* In standalone these configurations are defined by the MSC module. | |
* For composite device, these configuration must be defined here | |
* @{ | |
*/ | |
//! Endpoint numbers definition | |
#define UDI_MSC_EP_IN (3 | USB_EP_DIR_IN) | |
#define UDI_MSC_EP_OUT (3 | USB_EP_DIR_OUT) | |
//! Interface number | |
#define UDI_MSC_IFACE_NUMBER 2 | |
//@} | |
//@} | |
/** | |
* Configuration of HID Mouse interface | |
* @{ | |
*/ | |
//! Interface callback definition | |
#define UDI_HID_MOUSE_ENABLE_EXT() main_mouse_enable() | |
#define UDI_HID_MOUSE_DISABLE_EXT() main_mouse_disable() | |
//! Enable id string of interface to add an extra USB string | |
#define UDI_HID_MOUSE_STRING_ID 6 | |
/** | |
* USB HID Mouse low level configuration | |
* In standalone these configurations are defined by the HID Mouse module. | |
* For composite device, these configuration must be defined here | |
* @{ | |
*/ | |
//! Endpoint numbers definition | |
#define UDI_HID_MOUSE_EP_IN (4 | USB_EP_DIR_IN) | |
//! Interface number | |
#define UDI_HID_MOUSE_IFACE_NUMBER 3 | |
//@} | |
//@} | |
/** | |
* Configuration of HID Keyboard interface | |
* @{ | |
*/ | |
//! Interface callback definition | |
#define UDI_HID_KBD_ENABLE_EXT() main_kbd_enable() | |
#define UDI_HID_KBD_DISABLE_EXT() main_kbd_disable() | |
#define UDI_HID_KBD_CHANGE_LED(value) ui_kbd_led(value) | |
//! Enable id string of interface to add an extra USB string | |
#define UDI_HID_KBD_STRING_ID 7 | |
/** | |
* USB HID Keyboard low level configuration | |
* In standalone these configurations are defined by the HID Keyboard module. | |
* For composite device, these configuration must be defined here | |
* @{ | |
*/ | |
//! Endpoint numbers definition | |
#define UDI_HID_KBD_EP_IN (5 | USB_EP_DIR_IN) | |
//! Interface number | |
#define UDI_HID_KBD_IFACE_NUMBER 4 | |
//@} | |
//@} | |
//@} | |
/** | |
* Description of Composite Device | |
* @{ | |
*/ | |
//! USB Interfaces descriptor structure | |
#define UDI_COMPOSITE_DESC_T \ | |
usb_iad_desc_t udi_cdc_iad; \ | |
udi_cdc_comm_desc_t udi_cdc_comm; \ | |
udi_cdc_data_desc_t udi_cdc_data; \ | |
udi_msc_desc_t udi_msc; \ | |
udi_hid_mouse_desc_t udi_hid_mouse; \ | |
udi_hid_kbd_desc_t udi_hid_kbd | |
//! USB Interfaces descriptor value for Full Speed | |
#define UDI_COMPOSITE_DESC_FS \ | |
.udi_cdc_iad = UDI_CDC_IAD_DESC, \ | |
.udi_cdc_comm = UDI_CDC_COMM_DESC, \ | |
.udi_cdc_data = UDI_CDC_DATA_DESC, \ | |
.udi_msc = UDI_MSC_DESC_FS, \ | |
.udi_hid_mouse = UDI_HID_MOUSE_DESC,\ | |
.udi_hid_kbd = UDI_HID_KBD_DESC | |
//! USB Interfaces descriptor value for High Speed | |
#define UDI_COMPOSITE_DESC_HS \ | |
.udi_cdc_iad = UDI_CDC_IAD_DESC, \ | |
.udi_cdc_comm = UDI_CDC_COMM_DESC, \ | |
.udi_cdc_data = UDI_CDC_DATA_DESC, \ | |
.udi_msc = UDI_MSC_DESC_HS, \ | |
.udi_hid_mouse = UDI_HID_MOUSE_DESC,\ | |
.udi_hid_kbd = UDI_HID_KBD_DESC | |
//! USB Interface APIs | |
#define UDI_COMPOSITE_API \ | |
&udi_api_cdc_comm, \ | |
&udi_api_cdc_data, \ | |
&udi_api_msc, \ | |
&udi_api_hid_mouse, \ | |
&udi_api_hid_kbd | |
//@} | |
/** | |
* USB Device Driver Configuration | |
* @{ | |
*/ | |
//@} | |
//! The includes of classes and other headers must be done at the end of this file to avoid compile error | |
#include "udi_cdc.h" | |
#include "udi_msc.h" | |
#include "udi_hid_mouse.h" | |
#include "udi_hid_kbd.h" | |
#include "main.h" | |
#include "ui.h" | |
#endif // _CONF_USB_H_ |