| /* |
| * This file was produced by running the config_h.SH script, which |
| * gets its values from undef, which is generally produced by |
| * running Configure. |
| * |
| * Feel free to modify any of this as the need arises. Note, however, |
| * that running config_h.SH again will wipe out any changes you've made. |
| * For a more permanent change edit undef and rerun config_h.SH. |
| * |
| * $Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ |
| */ |
| |
| /* |
| * Package name : perl5 |
| * Source directory : |
| * Configuration time: Thu Jun 21 17:44:02 2001 |
| * Configured by : Administrator |
| * Target system : |
| */ |
| |
| #ifndef _config_h_ |
| #define _config_h_ |
| |
| /* LOC_SED: |
| * This symbol holds the complete pathname to the sed program. |
| */ |
| #define LOC_SED "" /**/ |
| |
| /* HAS_AINTL: |
| * This symbol, if defined, indicates that the aintl routine is |
| * available. If copysignl is also present we can emulate modfl. |
| */ |
| /*#define HAS_AINTL / **/ |
| |
| /* HAS_ALARM: |
| * This symbol, if defined, indicates that the alarm routine is |
| * available. |
| */ |
| /*#define HAS_ALARM /**/ |
| |
| /* HASATTRIBUTE: |
| * This symbol indicates the C compiler can check for function attributes, |
| * such as printf formats. This is normally only supported by GNU cc. |
| */ |
| /*#define HASATTRIBUTE /**/ |
| #ifndef HASATTRIBUTE |
| #ifdef __attribute__ |
| #undef __attribute__ |
| #endif |
| #define __attribute__(_arg_) |
| #endif |
| |
| /* HAS_BCMP: |
| * This symbol is defined if the bcmp() routine is available to |
| * compare blocks of memory. |
| */ |
| /*#define HAS_BCMP /**/ |
| |
| /* HAS_BCOPY: |
| * This symbol is defined if the bcopy() routine is available to |
| * copy blocks of memory. |
| */ |
| /*#define HAS_BCOPY /**/ |
| |
| /* HAS_BZERO: |
| * This symbol is defined if the bzero() routine is available to |
| * set a memory block to 0. |
| */ |
| /*#define HAS_BZERO /**/ |
| |
| /* HAS_CHOWN: |
| * This symbol, if defined, indicates that the chown routine is |
| * available. |
| */ |
| /*#define HAS_CHOWN /**/ |
| |
| /* HAS_CHROOT: |
| * This symbol, if defined, indicates that the chroot routine is |
| * available. |
| */ |
| /*#define HAS_CHROOT /**/ |
| |
| /* HAS_CHSIZE: |
| * This symbol, if defined, indicates that the chsize routine is available |
| * to truncate files. You might need a -lx to get this routine. |
| */ |
| #define HAS_CHSIZE /**/ |
| |
| /* HASCONST: |
| * This symbol, if defined, indicates that this C compiler knows about |
| * the const type. There is no need to actually test for that symbol |
| * within your programs. The mere use of the "const" keyword will |
| * trigger the necessary tests. |
| */ |
| #define HASCONST /**/ |
| #ifndef HASCONST |
| #define const |
| #endif |
| |
| /* HAS_CRYPT: |
| * This symbol, if defined, indicates that the crypt routine is available |
| * to encrypt passwords and the like. |
| */ |
| /*#define HAS_CRYPT /**/ |
| |
| /* HAS_CUSERID: |
| * This symbol, if defined, indicates that the cuserid routine is |
| * available to get character login names. |
| */ |
| /*#define HAS_CUSERID /**/ |
| |
| /* HAS_DBL_DIG: |
| * This symbol, if defined, indicates that this system's <float.h> |
| * or <limits.h> defines the symbol DBL_DIG, which is the number |
| * of significant digits in a double precision number. If this |
| * symbol is not defined, a guess of 15 is usually pretty good. |
| */ |
| #define HAS_DBL_DIG /**/ |
| |
| /* HAS_DIFFTIME: |
| * This symbol, if defined, indicates that the difftime routine is |
| * available. |
| */ |
| #define HAS_DIFFTIME /**/ |
| |
| /* HAS_DLERROR: |
| * This symbol, if defined, indicates that the dlerror routine is |
| * available to return a string describing the last error that |
| * occurred from a call to dlopen(), dlclose() or dlsym(). |
| */ |
| #define HAS_DLERROR /**/ |
| |
| /* HAS_DUP2: |
| * This symbol, if defined, indicates that the dup2 routine is |
| * available to duplicate file descriptors. |
| */ |
| #define HAS_DUP2 /**/ |
| |
| /* HAS_FAST_STDIO: |
| * This symbol, if defined, indicates that the "fast stdio" |
| * is available to manipulate the stdio buffers directly. |
| */ |
| /*#define HAS_FAST_STDIO /**/ |
| |
| /* HAS_FCHDIR: |
| * This symbol, if defined, indicates that the fchdir routine is |
| * available to change directory using a file descriptor. |
| */ |
| /*#define HAS_FCHDIR /**/ |
| |
| /* HAS_FCHMOD: |
| * This symbol, if defined, indicates that the fchmod routine is available |
| * to change mode of opened files. If unavailable, use chmod(). |
| */ |
| /*#define HAS_FCHMOD /**/ |
| |
| /* HAS_FCHOWN: |
| * This symbol, if defined, indicates that the fchown routine is available |
| * to change ownership of opened files. If unavailable, use chown(). |
| */ |
| /*#define HAS_FCHOWN /**/ |
| |
| /* HAS_FCNTL: |
| * This symbol, if defined, indicates to the C program that |
| * the fcntl() function exists. |
| */ |
| /*#define HAS_FCNTL /**/ |
| |
| /* HAS_FGETPOS: |
| * This symbol, if defined, indicates that the fgetpos routine is |
| * available to get the file position indicator, similar to ftell(). |
| */ |
| #define HAS_FGETPOS /**/ |
| |
| /* HAS_FLOCK: |
| * This symbol, if defined, indicates that the flock routine is |
| * available to do file locking. |
| */ |
| #define HAS_FLOCK /**/ |
| |
| /* HAS_FORK: |
| * This symbol, if defined, indicates that the fork routine is |
| * available. |
| */ |
| /*#define HAS_FORK /**/ |
| |
| /* HAS_FSETPOS: |
| * This symbol, if defined, indicates that the fsetpos routine is |
| * available to set the file position indicator, similar to fseek(). |
| */ |
| #define HAS_FSETPOS /**/ |
| |
| /* HAS_GETTIMEOFDAY: |
| * This symbol, if defined, indicates that the gettimeofday() system |
| * call is available for a sub-second accuracy clock. Usually, the file |
| * <sys/resource.h> needs to be included (see I_SYS_RESOURCE). |
| * The type "Timeval" should be used to refer to "struct timeval". |
| */ |
| /*#define HAS_GETTIMEOFDAY /**/ |
| #ifdef HAS_GETTIMEOFDAY |
| #define Timeval struct timeval /* Structure used by gettimeofday() */ |
| #endif |
| |
| /* HAS_GETGROUPS: |
| * This symbol, if defined, indicates that the getgroups() routine is |
| * available to get the list of process groups. If unavailable, multiple |
| * groups are probably not supported. |
| */ |
| /*#define HAS_GETGROUPS /**/ |
| |
| /* HAS_GETLOGIN: |
| * This symbol, if defined, indicates that the getlogin routine is |
| * available to get the login name. |
| */ |
| #define HAS_GETLOGIN /**/ |
| |
| /* HAS_GETPGID: |
| * This symbol, if defined, indicates to the C program that |
| * the getpgid(pid) function is available to get the |
| * process group id. |
| */ |
| /*#define HAS_GETPGID /**/ |
| |
| /* HAS_GETPGRP2: |
| * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) |
| * routine is available to get the current process group. |
| */ |
| /*#define HAS_GETPGRP2 /**/ |
| |
| /* HAS_GETPPID: |
| * This symbol, if defined, indicates that the getppid routine is |
| * available to get the parent process ID. |
| */ |
| /*#define HAS_GETPPID /**/ |
| |
| /* HAS_GETPRIORITY: |
| * This symbol, if defined, indicates that the getpriority routine is |
| * available to get a process's priority. |
| */ |
| /*#define HAS_GETPRIORITY /**/ |
| |
| /* HAS_INET_ATON: |
| * This symbol, if defined, indicates to the C program that the |
| * inet_aton() function is available to parse IP address "dotted-quad" |
| * strings. |
| */ |
| /*#define HAS_INET_ATON /**/ |
| |
| /* HAS_KILLPG: |
| * This symbol, if defined, indicates that the killpg routine is available |
| * to kill process groups. If unavailable, you probably should use kill |
| * with a negative process number. |
| */ |
| /*#define HAS_KILLPG /**/ |
| |
| /* HAS_LINK: |
| * This symbol, if defined, indicates that the link routine is |
| * available to create hard links. |
| */ |
| #define HAS_LINK /**/ |
| |
| /* HAS_LOCALECONV: |
| * This symbol, if defined, indicates that the localeconv routine is |
| * available for numeric and monetary formatting conventions. |
| */ |
| #define HAS_LOCALECONV /**/ |
| |
| /* HAS_LOCKF: |
| * This symbol, if defined, indicates that the lockf routine is |
| * available to do file locking. |
| */ |
| /*#define HAS_LOCKF /**/ |
| |
| /* HAS_LSTAT: |
| * This symbol, if defined, indicates that the lstat routine is |
| * available to do file stats on symbolic links. |
| */ |
| /*#define HAS_LSTAT /**/ |
| |
| /* HAS_MBLEN: |
| * This symbol, if defined, indicates that the mblen routine is available |
| * to find the number of bytes in a multibye character. |
| */ |
| #define HAS_MBLEN /**/ |
| |
| /* HAS_MBSTOWCS: |
| * This symbol, if defined, indicates that the mbstowcs routine is |
| * available to covert a multibyte string into a wide character string. |
| */ |
| #define HAS_MBSTOWCS /**/ |
| |
| /* HAS_MBTOWC: |
| * This symbol, if defined, indicates that the mbtowc routine is available |
| * to covert a multibyte to a wide character. |
| */ |
| #define HAS_MBTOWC /**/ |
| |
| /* HAS_MEMCMP: |
| * This symbol, if defined, indicates that the memcmp routine is available |
| * to compare blocks of memory. |
| */ |
| #define HAS_MEMCMP /**/ |
| |
| /* HAS_MEMCPY: |
| * This symbol, if defined, indicates that the memcpy routine is available |
| * to copy blocks of memory. |
| */ |
| #define HAS_MEMCPY /**/ |
| |
| /* HAS_MEMMOVE: |
| * This symbol, if defined, indicates that the memmove routine is available |
| * to copy potentially overlapping blocks of memory. This should be used |
| * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your |
| * own version. |
| */ |
| #define HAS_MEMMOVE /**/ |
| |
| /* HAS_MEMSET: |
| * This symbol, if defined, indicates that the memset routine is available |
| * to set blocks of memory. |
| */ |
| #define HAS_MEMSET /**/ |
| |
| /* HAS_MKDIR: |
| * This symbol, if defined, indicates that the mkdir routine is available |
| * to create directories. Otherwise you should fork off a new process to |
| * exec /bin/mkdir. |
| */ |
| #define HAS_MKDIR /**/ |
| |
| /* HAS_MKFIFO: |
| * This symbol, if defined, indicates that the mkfifo routine is |
| * available to create FIFOs. Otherwise, mknod should be able to |
| * do it for you. However, if mkfifo is there, mknod might require |
| * super-user privileges which mkfifo will not. |
| */ |
| /*#define HAS_MKFIFO /**/ |
| |
| /* HAS_MKTIME: |
| * This symbol, if defined, indicates that the mktime routine is |
| * available. |
| */ |
| #define HAS_MKTIME /**/ |
| |
| /* HAS_MSYNC: |
| * This symbol, if defined, indicates that the msync system call is |
| * available to synchronize a mapped file. |
| */ |
| /*#define HAS_MSYNC /**/ |
| |
| /* HAS_MUNMAP: |
| * This symbol, if defined, indicates that the munmap system call is |
| * available to unmap a region, usually mapped by mmap(). |
| */ |
| /*#define HAS_MUNMAP /**/ |
| |
| /* HAS_NICE: |
| * This symbol, if defined, indicates that the nice routine is |
| * available. |
| */ |
| /*#define HAS_NICE /**/ |
| |
| /* HAS_PATHCONF: |
| * This symbol, if defined, indicates that pathconf() is available |
| * to determine file-system related limits and options associated |
| * with a given filename. |
| */ |
| /* HAS_FPATHCONF: |
| * This symbol, if defined, indicates that pathconf() is available |
| * to determine file-system related limits and options associated |
| * with a given open file descriptor. |
| */ |
| /*#define HAS_PATHCONF /**/ |
| /*#define HAS_FPATHCONF /**/ |
| |
| /* HAS_PAUSE: |
| * This symbol, if defined, indicates that the pause routine is |
| * available to suspend a process until a signal is received. |
| */ |
| /*#define HAS_PAUSE /**/ |
| |
| /* HAS_PIPE: |
| * This symbol, if defined, indicates that the pipe routine is |
| * available to create an inter-process channel. |
| */ |
| #define HAS_PIPE /**/ |
| |
| /* HAS_POLL: |
| * This symbol, if defined, indicates that the poll routine is |
| * available to poll active file descriptors. You may safely |
| * include <poll.h> when this symbol is defined. |
| */ |
| /*#define HAS_POLL /**/ |
| |
| /* HAS_READDIR: |
| * This symbol, if defined, indicates that the readdir routine is |
| * available to read directory entries. You may have to include |
| * <dirent.h>. See I_DIRENT. |
| */ |
| #define HAS_READDIR /**/ |
| |
| /* HAS_SEEKDIR: |
| * This symbol, if defined, indicates that the seekdir routine is |
| * available. You may have to include <dirent.h>. See I_DIRENT. |
| */ |
| #define HAS_SEEKDIR /**/ |
| |
| /* HAS_TELLDIR: |
| * This symbol, if defined, indicates that the telldir routine is |
| * available. You may have to include <dirent.h>. See I_DIRENT. |
| */ |
| #define HAS_TELLDIR /**/ |
| |
| /* HAS_REWINDDIR: |
| * This symbol, if defined, indicates that the rewinddir routine is |
| * available. You may have to include <dirent.h>. See I_DIRENT. |
| */ |
| #define HAS_REWINDDIR /**/ |
| |
| /* HAS_READLINK: |
| * This symbol, if defined, indicates that the readlink routine is |
| * available to read the value of a symbolic link. |
| */ |
| /*#define HAS_READLINK /**/ |
| |
| /* HAS_RENAME: |
| * This symbol, if defined, indicates that the rename routine is available |
| * to rename files. Otherwise you should do the unlink(), link(), unlink() |
| * trick. |
| */ |
| #define HAS_RENAME /**/ |
| |
| /* HAS_RMDIR: |
| * This symbol, if defined, indicates that the rmdir routine is |
| * available to remove directories. Otherwise you should fork off a |
| * new process to exec /bin/rmdir. |
| */ |
| #define HAS_RMDIR /**/ |
| |
| /* HAS_SELECT: |
| * This symbol, if defined, indicates that the select routine is |
| * available to select active file descriptors. If the timeout field |
| * is used, <sys/time.h> may need to be included. |
| */ |
| #define HAS_SELECT /**/ |
| |
| /* HAS_SETEGID: |
| * This symbol, if defined, indicates that the setegid routine is available |
| * to change the effective gid of the current program. |
| */ |
| /*#define HAS_SETEGID /**/ |
| |
| /* HAS_SETEUID: |
| * This symbol, if defined, indicates that the seteuid routine is available |
| * to change the effective uid of the current program. |
| */ |
| /*#define HAS_SETEUID /**/ |
| |
| /* HAS_SETLINEBUF: |
| * This symbol, if defined, indicates that the setlinebuf routine is |
| * available to change stderr or stdout from block-buffered or unbuffered |
| * to a line-buffered mode. |
| */ |
| /*#define HAS_SETLINEBUF /**/ |
| |
| /* HAS_SETLOCALE: |
| * This symbol, if defined, indicates that the setlocale routine is |
| * available to handle locale-specific ctype implementations. |
| */ |
| #define HAS_SETLOCALE /**/ |
| |
| /* HAS_SETPGID: |
| * This symbol, if defined, indicates that the setpgid(pid, gpid) |
| * routine is available to set process group ID. |
| */ |
| /*#define HAS_SETPGID /**/ |
| |
| /* HAS_SETPGRP2: |
| * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) |
| * routine is available to set the current process group. |
| */ |
| /*#define HAS_SETPGRP2 /**/ |
| |
| /* HAS_SETPRIORITY: |
| * This symbol, if defined, indicates that the setpriority routine is |
| * available to set a process's priority. |
| */ |
| /*#define HAS_SETPRIORITY /**/ |
| |
| /* HAS_SETREGID: |
| * This symbol, if defined, indicates that the setregid routine is |
| * available to change the real and effective gid of the current |
| * process. |
| */ |
| /* HAS_SETRESGID: |
| * This symbol, if defined, indicates that the setresgid routine is |
| * available to change the real, effective and saved gid of the current |
| * process. |
| */ |
| /*#define HAS_SETREGID /**/ |
| /*#define HAS_SETRESGID /**/ |
| |
| /* HAS_SETREUID: |
| * This symbol, if defined, indicates that the setreuid routine is |
| * available to change the real and effective uid of the current |
| * process. |
| */ |
| /* HAS_SETRESUID: |
| * This symbol, if defined, indicates that the setresuid routine is |
| * available to change the real, effective and saved uid of the current |
| * process. |
| */ |
| /*#define HAS_SETREUID /**/ |
| /*#define HAS_SETRESUID /**/ |
| |
| /* HAS_SETRGID: |
| * This symbol, if defined, indicates that the setrgid routine is available |
| * to change the real gid of the current program. |
| */ |
| /*#define HAS_SETRGID /**/ |
| |
| /* HAS_SETRUID: |
| * This symbol, if defined, indicates that the setruid routine is available |
| * to change the real uid of the current program. |
| */ |
| /*#define HAS_SETRUID /**/ |
| |
| /* HAS_SETSID: |
| * This symbol, if defined, indicates that the setsid routine is |
| * available to set the process group ID. |
| */ |
| /*#define HAS_SETSID /**/ |
| |
| /* Shmat_t: |
| * This symbol holds the return type of the shmat() system call. |
| * Usually set to 'void *' or 'char *'. |
| */ |
| /* HAS_SHMAT_PROTOTYPE: |
| * This symbol, if defined, indicates that the sys/shm.h includes |
| * a prototype for shmat(). Otherwise, it is up to the program to |
| * guess one. Shmat_t shmat(int, Shmat_t, int) is a good guess, |
| * but not always right so it should be emitted by the program only |
| * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. |
| */ |
| #define Shmat_t void * /**/ |
| /*#define HAS_SHMAT_PROTOTYPE /**/ |
| |
| /* HAS_STRCHR: |
| * This symbol is defined to indicate that the strchr()/strrchr() |
| * functions are available for string searching. If not, try the |
| * index()/rindex() pair. |
| */ |
| /* HAS_INDEX: |
| * This symbol is defined to indicate that the index()/rindex() |
| * functions are available for string searching. |
| */ |
| #define HAS_STRCHR /**/ |
| /*#define HAS_INDEX /**/ |
| |
| /* HAS_STRCOLL: |
| * This symbol, if defined, indicates that the strcoll routine is |
| * available to compare strings using collating information. |
| */ |
| #define HAS_STRCOLL /**/ |
| |
| /* USE_STRUCT_COPY: |
| * This symbol, if defined, indicates that this C compiler knows how |
| * to copy structures. If undefined, you'll need to use a block copy |
| * routine of some sort instead. |
| */ |
| #define USE_STRUCT_COPY /**/ |
| |
| /* HAS_STRTOD: |
| * This symbol, if defined, indicates that the strtod routine is |
| * available to provide better numeric string conversion than atof(). |
| */ |
| #define HAS_STRTOD /**/ |
| |
| /* HAS_STRTOL: |
| * This symbol, if defined, indicates that the strtol routine is available |
| * to provide better numeric string conversion than atoi() and friends. |
| */ |
| #define HAS_STRTOL /**/ |
| |
| /* HAS_STRXFRM: |
| * This symbol, if defined, indicates that the strxfrm() routine is |
| * available to transform strings. |
| */ |
| #define HAS_STRXFRM /**/ |
| |
| /* HAS_SYMLINK: |
| * This symbol, if defined, indicates that the symlink routine is available |
| * to create symbolic links. |
| */ |
| /*#define HAS_SYMLINK /**/ |
| |
| /* HAS_SYSCALL: |
| * This symbol, if defined, indicates that the syscall routine is |
| * available to call arbitrary system calls. If undefined, that's tough. |
| */ |
| /*#define HAS_SYSCALL /**/ |
| |
| /* HAS_SYSCONF: |
| * This symbol, if defined, indicates that sysconf() is available |
| * to determine system related limits and options. |
| */ |
| /*#define HAS_SYSCONF /**/ |
| |
| /* HAS_SYSTEM: |
| * This symbol, if defined, indicates that the system routine is |
| * available to issue a shell command. |
| */ |
| #define HAS_SYSTEM /**/ |
| |
| /* HAS_TCGETPGRP: |
| * This symbol, if defined, indicates that the tcgetpgrp routine is |
| * available to get foreground process group ID. |
| */ |
| /*#define HAS_TCGETPGRP /**/ |
| |
| /* HAS_TCSETPGRP: |
| * This symbol, if defined, indicates that the tcsetpgrp routine is |
| * available to set foreground process group ID. |
| */ |
| /*#define HAS_TCSETPGRP /**/ |
| |
| /* HAS_TRUNCATE: |
| * This symbol, if defined, indicates that the truncate routine is |
| * available to truncate files. |
| */ |
| /*#define HAS_TRUNCATE /**/ |
| |
| /* HAS_TZNAME: |
| * This symbol, if defined, indicates that the tzname[] array is |
| * available to access timezone names. |
| */ |
| #define HAS_TZNAME /**/ |
| |
| /* HAS_UMASK: |
| * This symbol, if defined, indicates that the umask routine is |
| * available to set and get the value of the file creation mask. |
| */ |
| #define HAS_UMASK /**/ |
| |
| /* HAS_USLEEP: |
| * This symbol, if defined, indicates that the usleep routine is |
| * available to let the process sleep on a sub-second accuracy. |
| */ |
| /*#define HAS_USLEEP /**/ |
| |
| /* HASVOLATILE: |
| * This symbol, if defined, indicates that this C compiler knows about |
| * the volatile declaration. |
| */ |
| #define HASVOLATILE /**/ |
| #ifndef HASVOLATILE |
| #define volatile |
| #endif |
| |
| /* HAS_WAIT4: |
| * This symbol, if defined, indicates that wait4() exists. |
| */ |
| /*#define HAS_WAIT4 /**/ |
| |
| /* HAS_WAITPID: |
| * This symbol, if defined, indicates that the waitpid routine is |
| * available to wait for child process. |
| */ |
| #define HAS_WAITPID /**/ |
| |
| /* HAS_WCSTOMBS: |
| * This symbol, if defined, indicates that the wcstombs routine is |
| * available to convert wide character strings to multibyte strings. |
| */ |
| #define HAS_WCSTOMBS /**/ |
| |
| /* HAS_WCTOMB: |
| * This symbol, if defined, indicates that the wctomb routine is available |
| * to covert a wide character to a multibyte. |
| */ |
| #define HAS_WCTOMB /**/ |
| |
| /* I_ARPA_INET: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <arpa/inet.h> to get inet_addr and friends declarations. |
| */ |
| #define I_ARPA_INET /**/ |
| |
| /* I_ASSERT: |
| * This symbol, if defined, indicates to the C program that it could |
| * include <assert.h> to get the assert() macro. |
| */ |
| #define I_ASSERT /**/ |
| |
| /* I_DBM: |
| * This symbol, if defined, indicates that <dbm.h> exists and should |
| * be included. |
| */ |
| /* I_RPCSVC_DBM: |
| * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and |
| * should be included. |
| */ |
| /*#define I_DBM /**/ |
| #define I_RPCSVC_DBM /**/ |
| |
| /* I_DIRENT: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <dirent.h>. Using this symbol also triggers the definition |
| * of the Direntry_t define which ends up being 'struct dirent' or |
| * 'struct direct' depending on the availability of <dirent.h>. |
| */ |
| /* DIRNAMLEN: |
| * This symbol, if defined, indicates to the C program that the length |
| * of directory entry names is provided by a d_namlen field. Otherwise |
| * you need to do strlen() on the d_name field. |
| */ |
| /* Direntry_t: |
| * This symbol is set to 'struct direct' or 'struct dirent' depending on |
| * whether dirent is available or not. You should use this pseudo type to |
| * portably declare your directory entries. |
| */ |
| #define I_DIRENT /**/ |
| /*#define DIRNAMLEN /**/ |
| #define Direntry_t DIR |
| |
| /* I_DLFCN: |
| * This symbol, if defined, indicates that <dlfcn.h> exists and should |
| * be included. |
| */ |
| #define I_DLFCN /**/ |
| |
| /* I_FCNTL: |
| * This manifest constant tells the C program to include <fcntl.h>. |
| */ |
| #define I_FCNTL /**/ |
| |
| /* I_FLOAT: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <float.h> to get definition of symbols like DBL_MAX or |
| * DBL_MIN, i.e. machine dependent floating point values. |
| */ |
| #define I_FLOAT /**/ |
| |
| /* I_LIMITS: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <limits.h> to get definition of symbols like WORD_BIT or |
| * LONG_MAX, i.e. machine dependant limitations. |
| */ |
| #define I_LIMITS /**/ |
| |
| /* I_LOCALE: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <locale.h>. |
| */ |
| #define I_LOCALE /**/ |
| |
| /* I_MATH: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <math.h>. |
| */ |
| #define I_MATH /**/ |
| |
| /* I_MEMORY: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <memory.h>. |
| */ |
| /*#define I_MEMORY /**/ |
| |
| /* I_NDBM: |
| * This symbol, if defined, indicates that <ndbm.h> exists and should |
| * be included. |
| */ |
| /*#define I_NDBM /**/ |
| |
| /* I_NET_ERRNO: |
| * This symbol, if defined, indicates that <net/errno.h> exists and |
| * should be included. |
| */ |
| /*#define I_NET_ERRNO /**/ |
| |
| /* I_NETINET_IN: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. |
| */ |
| #define I_NETINET_IN /**/ |
| |
| /* I_SFIO: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sfio.h>. |
| */ |
| /*#define I_SFIO /**/ |
| |
| /* I_STDDEF: |
| * This symbol, if defined, indicates that <stddef.h> exists and should |
| * be included. |
| */ |
| #define I_STDDEF /**/ |
| |
| /* I_STDLIB: |
| * This symbol, if defined, indicates that <stdlib.h> exists and should |
| * be included. |
| */ |
| #define I_STDLIB /**/ |
| |
| /* I_STRING: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <string.h> (USG systems) instead of <strings.h> (BSD systems). |
| */ |
| #define I_STRING /**/ |
| |
| /* I_SYS_DIR: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/dir.h>. |
| */ |
| /*#define I_SYS_DIR /**/ |
| |
| /* I_SYS_FILE: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/file.h> to get definition of R_OK and friends. |
| */ |
| /*#define I_SYS_FILE /**/ |
| |
| /* I_SYS_IOCTL: |
| * This symbol, if defined, indicates that <sys/ioctl.h> exists and should |
| * be included. Otherwise, include <sgtty.h> or <termio.h>. |
| */ |
| /* I_SYS_SOCKIO: |
| * This symbol, if defined, indicates the <sys/sockio.h> should be included |
| * to get socket ioctl options, like SIOCATMARK. |
| */ |
| #define I_SYS_IOCTL /**/ |
| #define I_SYS_SOCKIO /**/ |
| |
| /* I_SYS_NDIR: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/ndir.h>. |
| */ |
| /*#define I_SYS_NDIR /**/ |
| |
| /* I_SYS_PARAM: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/param.h>. |
| */ |
| /*#define I_SYS_PARAM /**/ |
| |
| /* I_SYS_RESOURCE: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/resource.h>. |
| */ |
| /*#define I_SYS_RESOURCE /**/ |
| |
| /* I_SYS_SELECT: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/select.h> in order to get definition of struct timeval. |
| */ |
| /*#define I_SYS_SELECT /**/ |
| |
| /* I_SYS_STAT: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/stat.h>. |
| */ |
| #define I_SYS_STAT /**/ |
| |
| /* I_SYS_TIMES: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/times.h>. |
| */ |
| /*#define I_SYS_TIMES /**/ |
| |
| /* I_SYS_TYPES: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/types.h>. |
| */ |
| #define I_SYS_TYPES /**/ |
| |
| /* I_SYS_UN: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/un.h> to get UNIX domain socket definitions. |
| */ |
| /*#define I_SYS_UN /**/ |
| |
| /* I_SYS_WAIT: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/wait.h>. |
| */ |
| /*#define I_SYS_WAIT /**/ |
| |
| /* I_TERMIO: |
| * This symbol, if defined, indicates that the program should include |
| * <termio.h> rather than <sgtty.h>. There are also differences in |
| * the ioctl() calls that depend on the value of this symbol. |
| */ |
| /* I_TERMIOS: |
| * This symbol, if defined, indicates that the program should include |
| * the POSIX termios.h rather than sgtty.h or termio.h. |
| * There are also differences in the ioctl() calls that depend on the |
| * value of this symbol. |
| */ |
| /* I_SGTTY: |
| * This symbol, if defined, indicates that the program should include |
| * <sgtty.h> rather than <termio.h>. There are also differences in |
| * the ioctl() calls that depend on the value of this symbol. |
| */ |
| /*#define I_TERMIO /**/ |
| /*#define I_TERMIOS /**/ |
| /*#define I_SGTTY /**/ |
| |
| /* I_UNISTD: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <unistd.h>. |
| */ |
| /*#define I_UNISTD /**/ |
| |
| /* I_UTIME: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <utime.h>. |
| */ |
| #define I_UTIME /**/ |
| |
| /* I_VALUES: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <values.h> to get definition of symbols like MINFLOAT or |
| * MAXLONG, i.e. machine dependant limitations. Probably, you |
| * should use <limits.h> instead, if it is available. |
| */ |
| /*#define I_VALUES /**/ |
| |
| /* I_VFORK: |
| * This symbol, if defined, indicates to the C program that it should |
| * include vfork.h. |
| */ |
| /*#define I_VFORK /**/ |
| |
| /* CAN_PROTOTYPE: |
| * If defined, this macro indicates that the C compiler can handle |
| * function prototypes. |
| */ |
| #define CAN_PROTOTYPE /**/ |
| |
| /* SH_PATH: |
| * This symbol contains the full pathname to the shell used on this |
| * on this system to execute Bourne shell scripts. Usually, this will be |
| * /bin/sh, though it's possible that some systems will have /bin/ksh, |
| * /bin/pdksh, /bin/ash, /bin/bash, or even something such as |
| * D:/bin/sh.exe. |
| */ |
| #define SH_PATH "cmd /x /c" /**/ |
| |
| /* INTSIZE: |
| * This symbol contains the value of sizeof(int) so that the C |
| * preprocessor can make decisions based on it. |
| */ |
| /* LONGSIZE: |
| * This symbol contains the value of sizeof(long) so that the C |
| * preprocessor can make decisions based on it. |
| */ |
| /* SHORTSIZE: |
| * This symbol contains the value of sizeof(short) so that the C |
| * preprocessor can make decisions based on it. |
| */ |
| #define INTSIZE 4 /**/ |
| #define LONGSIZE 4 /**/ |
| #define SHORTSIZE 2 /**/ |
| |
| /* MULTIARCH: |
| * This symbol, if defined, signifies that the build |
| * process will produce some binary files that are going to be |
| * used in a cross-platform environment. This is the case for |
| * example with the NeXT "fat" binaries that contain executables |
| * for several CPUs. |
| */ |
| /*#define MULTIARCH /**/ |
| |
| /* HAS_QUAD: |
| * This symbol, if defined, tells that there's a 64-bit integer type, |
| * Quad_t, and its unsigned counterpart, Uquad_t. QUADKIND will be one |
| * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. |
| */ |
| /*#define HAS_QUAD /**/ |
| #ifdef HAS_QUAD |
| # define Quad_t __int64 /**/ |
| # define Uquad_t unsigned __int64 /**/ |
| # define QUADKIND 5 /**/ |
| # define QUAD_IS_INT 1 |
| # define QUAD_IS_LONG 2 |
| # define QUAD_IS_LONG_LONG 3 |
| # define QUAD_IS_INT64_T 4 |
| #endif |
| |
| /* HAS_ACCESSX: |
| * This symbol, if defined, indicates that the accessx routine is |
| * available to do extended access checks. |
| */ |
| /*#define HAS_ACCESSX /**/ |
| |
| /* HAS_EACCESS: |
| * This symbol, if defined, indicates that the eaccess routine is |
| * available to do extended access checks. |
| */ |
| /*#define HAS_EACCESS /**/ |
| |
| /* I_SYS_ACCESS: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/access.h>. |
| */ |
| /*#define I_SYS_ACCESS /**/ |
| |
| /* I_SYS_SECURITY: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/security.h>. |
| */ |
| /*#define I_SYS_SECURITY /**/ |
| |
| /* OSNAME: |
| * This symbol contains the name of the operating system, as determined |
| * by Configure. You shouldn't rely on it too much; the specific |
| * feature tests from Configure are generally more reliable. |
| */ |
| /* OSVERS: |
| * This symbol contains the version of the operating system, as determined |
| * by Configure. You shouldn't rely on it too much; the specific |
| * feature tests from Configure are generally more reliable. |
| */ |
| #define OSNAME "NetWare" /**/ |
| #define OSVERS "5.x" /**/ |
| |
| /* MEM_ALIGNBYTES: |
| * This symbol contains the number of bytes required to align a |
| * double, or a long double when applicable. Usual values are 2, |
| * 4 and 8. The default is eight, for safety. |
| */ |
| #if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) |
| # define MEM_ALIGNBYTES 8 |
| #else |
| #define MEM_ALIGNBYTES 8 |
| #endif |
| |
| /* ARCHLIB: |
| * This variable, if defined, holds the name of the directory in |
| * which the user wants to put architecture-dependent public |
| * library files for perl5. It is most often a local directory |
| * such as /usr/local/lib. Programs using this variable must be |
| * prepared to deal with filename expansion. If ARCHLIB is the |
| * same as PRIVLIB, it is not defined, since presumably the |
| * program already searches PRIVLIB. |
| */ |
| /* ARCHLIB_EXP: |
| * This symbol contains the ~name expanded version of ARCHLIB, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| #define ARCHLIB "c:\\perl\\5.16.2\\lib\\NetWare-x86-multi-thread" /**/ |
| /*#define ARCHLIB_EXP "" /**/ |
| |
| /* ARCHNAME: |
| * This symbol holds a string representing the architecture name. |
| * It may be used to construct an architecture-dependant pathname |
| * where library files may be held under a private library, for |
| * instance. |
| */ |
| #define ARCHNAME "NetWare-x86-multi-thread" /**/ |
| |
| /* HAS_ATOLF: |
| * This symbol, if defined, indicates that the atolf routine is |
| * available to convert strings into long doubles. |
| */ |
| /*#define HAS_ATOLF /**/ |
| |
| /* HAS_ATOLL: |
| * This symbol, if defined, indicates that the atoll routine is |
| * available to convert strings into long longs. |
| */ |
| /*#define HAS_ATOLL /**/ |
| |
| /* BIN: |
| * This symbol holds the path of the bin directory where the package will |
| * be installed. Program must be prepared to deal with ~name substitution. |
| */ |
| /* BIN_EXP: |
| * This symbol is the filename expanded version of the BIN symbol, for |
| * programs that do not want to deal with that at run-time. |
| */ |
| #define BIN "c:\\perl\\5.16.2\\bin\\NetWare-x86-multi-thread" /**/ |
| #define BIN_EXP "c:\\perl\\5.16.2\\bin\\NetWare-x86-multi-thread" /**/ |
| |
| /* BYTEORDER: |
| * This symbol holds the hexadecimal constant defined in byteorder, |
| * i.e. 0x1234 or 0x4321, etc... |
| * If the compiler supports cross-compiling or multiple-architecture |
| * binaries (eg. on NeXT systems), use compiler-defined macros to |
| * determine the byte order. |
| * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture |
| * Binaries (MAB) on either big endian or little endian machines. |
| * The endian-ness is available at compile-time. This only matters |
| * for perl, where the config.h can be generated and installed on |
| * one system, and used by a different architecture to build an |
| * extension. Older versions of NeXT that might not have |
| * defined either *_ENDIAN__ were all on Motorola 680x0 series, |
| * so the default case (for NeXT) is big endian to catch them. |
| * This might matter for NeXT 3.0. |
| */ |
| #if defined(USE_CROSS_COMPILE) || defined(MULTIARCH) |
| # ifdef __LITTLE_ENDIAN__ |
| # if LONGSIZE == 4 |
| # define BYTEORDER 0x1234 |
| # else |
| # if LONGSIZE == 8 |
| # define BYTEORDER 0x12345678 |
| # endif |
| # endif |
| # else |
| # ifdef __BIG_ENDIAN__ |
| # if LONGSIZE == 4 |
| # define BYTEORDER 0x4321 |
| # else |
| # if LONGSIZE == 8 |
| # define BYTEORDER 0x87654321 |
| # endif |
| # endif |
| # endif |
| # endif |
| # if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) |
| # define BYTEORDER 0x4321 |
| # endif |
| #else |
| #define BYTEORDER 0x1234 /* large digits for MSB */ |
| #endif /* NeXT */ |
| |
| /* CAT2: |
| * This macro catenates 2 tokens together. |
| */ |
| /* STRINGIFY: |
| * This macro surrounds its token with double quotes. |
| */ |
| #if 42 == 1 |
| #define CAT2(a,b) a/**/b |
| #define STRINGIFY(a) "a" |
| /* If you can get stringification with catify, tell me how! */ |
| #endif |
| #if 42 == 42 |
| #define PeRl_CaTiFy(a, b) a ## b |
| #define PeRl_StGiFy(a) #a |
| /* the additional level of indirection enables these macros to be |
| * used as arguments to other macros. See K&R 2nd ed., page 231. */ |
| #define CAT2(a,b) PeRl_CaTiFy(a,b) |
| #define StGiFy(a) PeRl_StGiFy(a) |
| #define STRINGIFY(a) PeRl_StGiFy(a) |
| #endif |
| #if 42 != 1 && 42 != 42 |
| # include "Bletch: How does this C preprocessor concatenate tokens?" |
| #endif |
| |
| /* CPPSTDIN: |
| * This symbol contains the first part of the string which will invoke |
| * the C preprocessor on the standard input and produce to standard |
| * output. Typical value of "cc -E" or "/lib/cpp", but it can also |
| * call a wrapper. See CPPRUN. |
| */ |
| /* CPPMINUS: |
| * This symbol contains the second part of the string which will invoke |
| * the C preprocessor on the standard input and produce to standard |
| * output. This symbol will have the value "-" if CPPSTDIN needs a minus |
| * to specify standard input, otherwise the value is "". |
| */ |
| /* CPPRUN: |
| * This symbol contains the string which will invoke a C preprocessor on |
| * the standard input and produce to standard output. It needs to end |
| * with CPPLAST, after all other preprocessor flags have been specified. |
| * The main difference with CPPSTDIN is that this program will never be a |
| * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is |
| * available directly to the user. Note that it may well be different from |
| * the preprocessor used to compile the C program. |
| */ |
| /* CPPLAST: |
| * This symbol is intended to be used along with CPPRUN in the same manner |
| * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". |
| */ |
| #define CPPSTDIN "cl -nologo -E" |
| #define CPPMINUS "" |
| #define CPPRUN "cl -nologo -E" |
| #define CPPLAST "" |
| |
| /* HAS__FWALK: |
| * This symbol, if defined, indicates that the _fwalk system call is |
| * available to apply a function to all the file handles. |
| */ |
| /*#define HAS__FWALK /**/ |
| |
| /* HAS_ACCESS: |
| * This manifest constant lets the C program know that the access() |
| * system call is available to check for accessibility using real UID/GID. |
| * (always present on UNIX.) |
| */ |
| #define HAS_ACCESS /**/ |
| |
| /* CASTI32: |
| * This symbol is defined if the C compiler can cast negative |
| * or large floating point numbers to 32-bit ints. |
| */ |
| /*#define CASTI32 /**/ |
| |
| /* CASTNEGFLOAT: |
| * This symbol is defined if the C compiler can cast negative |
| * numbers to unsigned longs, ints and shorts. |
| */ |
| /* CASTFLAGS: |
| * This symbol contains flags that say what difficulties the compiler |
| * has casting odd floating values to unsigned long: |
| * 0 = ok |
| * 1 = couldn't cast < 0 |
| * 2 = couldn't cast >= 0x80000000 |
| * 4 = couldn't cast in argument expression list |
| */ |
| #define CASTNEGFLOAT /**/ |
| #define CASTFLAGS 0 /**/ |
| |
| /* VOID_CLOSEDIR: |
| * This symbol, if defined, indicates that the closedir() routine |
| * does not return a value. |
| */ |
| /*#define VOID_CLOSEDIR /**/ |
| |
| /* HAS_STRUCT_CMSGHDR: |
| * This symbol, if defined, indicates that the struct cmsghdr |
| * is supported. |
| */ |
| /*#define HAS_STRUCT_CMSGHDR /**/ |
| |
| /* HAS_CSH: |
| * This symbol, if defined, indicates that the C-shell exists. |
| */ |
| /* CSH: |
| * This symbol, if defined, contains the full pathname of csh. |
| */ |
| /*#define HAS_CSH /**/ |
| #ifdef HAS_CSH |
| #define CSH "" /**/ |
| #endif |
| |
| /* DLSYM_NEEDS_UNDERSCORE: |
| * This symbol, if defined, indicates that we need to prepend an |
| * underscore to the symbol name before calling dlsym(). This only |
| * makes sense if you *have* dlsym, which we will presume is the |
| * case if you're using dl_dlopen.xs. |
| */ |
| /*#define DLSYM_NEEDS_UNDERSCORE /**/ |
| |
| /* HAS_DRAND48_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the drand48() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern double drand48(void); |
| */ |
| /*#define HAS_DRAND48_PROTO /**/ |
| |
| /* HAS_ENDGRENT: |
| * This symbol, if defined, indicates that the getgrent routine is |
| * available for finalizing sequential access of the group database. |
| */ |
| /*#define HAS_ENDGRENT /**/ |
| |
| /* HAS_ENDHOSTENT: |
| * This symbol, if defined, indicates that the endhostent() routine is |
| * available to close whatever was being used for host queries. |
| */ |
| /*#define HAS_ENDHOSTENT /**/ |
| |
| /* HAS_ENDNETENT: |
| * This symbol, if defined, indicates that the endnetent() routine is |
| * available to close whatever was being used for network queries. |
| */ |
| /*#define HAS_ENDNETENT /**/ |
| |
| /* HAS_ENDPROTOENT: |
| * This symbol, if defined, indicates that the endprotoent() routine is |
| * available to close whatever was being used for protocol queries. |
| */ |
| /*#define HAS_ENDPROTOENT /**/ |
| |
| /* HAS_ENDPWENT: |
| * This symbol, if defined, indicates that the getgrent routine is |
| * available for finalizing sequential access of the passwd database. |
| */ |
| /*#define HAS_ENDPWENT /**/ |
| |
| /* HAS_ENDSERVENT: |
| * This symbol, if defined, indicates that the endservent() routine is |
| * available to close whatever was being used for service queries. |
| */ |
| /*#define HAS_ENDSERVENT /**/ |
| |
| /* FCNTL_CAN_LOCK: |
| * This symbol, if defined, indicates that fcntl() can be used |
| * for file locking. Normally on Unix systems this is defined. |
| * It may be undefined on VMS. |
| */ |
| /*#define FCNTL_CAN_LOCK /**/ |
| |
| /* HAS_FD_SET: |
| * This symbol, when defined, indicates presence of the fd_set typedef |
| * in <sys/types.h> |
| */ |
| #define HAS_FD_SET /**/ |
| |
| /* FLEXFILENAMES: |
| * This symbol, if defined, indicates that the system supports filenames |
| * longer than 14 characters. |
| */ |
| #define FLEXFILENAMES /**/ |
| |
| /* HAS_FPOS64_T: |
| * This symbol will be defined if the C compiler supports fpos64_t. |
| */ |
| /*#define HAS_FPOS64_T /**/ |
| |
| /* HAS_FREXPL: |
| * This symbol, if defined, indicates that the frexpl routine is |
| * available to break a long double floating-point number into |
| * a normalized fraction and an integral power of 2. |
| */ |
| /*#define HAS_FREXPL /**/ |
| |
| /* HAS_STRUCT_FS_DATA: |
| * This symbol, if defined, indicates that the struct fs_data |
| * to do statfs() is supported. |
| */ |
| /*#define HAS_STRUCT_FS_DATA /**/ |
| |
| /* HAS_FSEEKO: |
| * This symbol, if defined, indicates that the fseeko routine is |
| * available to fseek beyond 32 bits (useful for ILP32 hosts). |
| */ |
| /*#define HAS_FSEEKO /**/ |
| |
| /* HAS_FSTATFS: |
| * This symbol, if defined, indicates that the fstatfs routine is |
| * available to stat filesystems by file descriptors. |
| */ |
| /*#define HAS_FSTATFS /**/ |
| |
| /* HAS_FSYNC: |
| * This symbol, if defined, indicates that the fsync routine is |
| * available to write a file's modified data and attributes to |
| * permanent storage. |
| */ |
| /*#define HAS_FSYNC /**/ |
| |
| /* HAS_FTELLO: |
| * This symbol, if defined, indicates that the ftello routine is |
| * available to ftell beyond 32 bits (useful for ILP32 hosts). |
| */ |
| /*#define HAS_FTELLO /**/ |
| |
| /* Gconvert: |
| * This preprocessor macro is defined to convert a floating point |
| * number to a string without a trailing decimal point. This |
| * emulates the behavior of sprintf("%g"), but is sometimes much more |
| * efficient. If gconvert() is not available, but gcvt() drops the |
| * trailing decimal point, then gcvt() is used. If all else fails, |
| * a macro using sprintf("%g") is used. Arguments for the Gconvert |
| * macro are: value, number of digits, whether trailing zeros should |
| * be retained, and the output buffer. |
| * Possible values are: |
| * d_Gconvert='gconvert((x),(n),(t),(b))' |
| * d_Gconvert='gcvt((x),(n),(b))' |
| * d_Gconvert='sprintf((b),"%.*g",(n),(x))' |
| * The last two assume trailing zeros should not be kept. |
| */ |
| #define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) |
| |
| /* HAS_GETCWD: |
| * This symbol, if defined, indicates that the getcwd routine is |
| * available to get the current working directory. |
| */ |
| #define HAS_GETCWD /**/ |
| |
| /* HAS_GETESPWNAM: |
| * This symbol, if defined, indicates that the getespwnam system call is |
| * available to retrieve enhanced (shadow) password entries by name. |
| */ |
| /*#define HAS_GETESPWNAM /**/ |
| |
| /* HAS_GETFSSTAT: |
| * This symbol, if defined, indicates that the getfsstat routine is |
| * available to stat filesystems in bulk. |
| */ |
| /*#define HAS_GETFSSTAT /**/ |
| |
| /* HAS_GETGRENT: |
| * This symbol, if defined, indicates that the getgrent routine is |
| * available for sequential access of the group database. |
| */ |
| /*#define HAS_GETGRENT /**/ |
| |
| /* HAS_GETHOSTBYADDR: |
| * This symbol, if defined, indicates that the gethostbyaddr() routine is |
| * available to look up hosts by their IP addresses. |
| */ |
| #define HAS_GETHOSTBYADDR /**/ |
| |
| /* HAS_GETHOSTBYNAME: |
| * This symbol, if defined, indicates that the gethostbyname() routine is |
| * available to look up host names in some data base or other. |
| */ |
| #define HAS_GETHOSTBYNAME /**/ |
| |
| /* HAS_GETHOSTENT: |
| * This symbol, if defined, indicates that the gethostent() routine is |
| * available to look up host names in some data base or another. |
| */ |
| /*#define HAS_GETHOSTENT /**/ |
| |
| /* HAS_GETHOSTNAME: |
| * This symbol, if defined, indicates that the C program may use the |
| * gethostname() routine to derive the host name. See also HAS_UNAME |
| * and PHOSTNAME. |
| */ |
| /* HAS_UNAME: |
| * This symbol, if defined, indicates that the C program may use the |
| * uname() routine to derive the host name. See also HAS_GETHOSTNAME |
| * and PHOSTNAME. |
| */ |
| /* PHOSTNAME: |
| * This symbol, if defined, indicates the command to feed to the |
| * popen() routine to derive the host name. See also HAS_GETHOSTNAME |
| * and HAS_UNAME. Note that the command uses a fully qualified path, |
| * so that it is safe even if used by a process with super-user |
| * privileges. |
| */ |
| /* HAS_PHOSTNAME: |
| * This symbol, if defined, indicates that the C program may use the |
| * contents of PHOSTNAME as a command to feed to the popen() routine |
| * to derive the host name. |
| */ |
| #define HAS_GETHOSTNAME /**/ |
| #define HAS_UNAME /**/ |
| /*#define HAS_PHOSTNAME /**/ |
| #ifdef HAS_PHOSTNAME |
| #define PHOSTNAME "" /* How to get the host name */ |
| #endif |
| |
| /* HAS_GETHOST_PROTOS: |
| * This symbol, if defined, indicates that <netdb.h> includes |
| * prototypes for gethostent(), gethostbyname(), and |
| * gethostbyaddr(). Otherwise, it is up to the program to guess |
| * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
| */ |
| #define HAS_GETHOST_PROTOS /**/ |
| |
| /* HAS_GETITIMER: |
| * This symbol, if defined, indicates that the getitimer routine is |
| * available to return interval timers. |
| */ |
| /*#define HAS_GETITIMER /**/ |
| |
| /* HAS_GETMNT: |
| * This symbol, if defined, indicates that the getmnt routine is |
| * available to get filesystem mount info by filename. |
| */ |
| /*#define HAS_GETMNT /**/ |
| |
| /* HAS_GETMNTENT: |
| * This symbol, if defined, indicates that the getmntent routine is |
| * available to iterate through mounted file systems to get their info. |
| */ |
| /*#define HAS_GETMNTENT /**/ |
| |
| /* HAS_GETNETBYADDR: |
| * This symbol, if defined, indicates that the getnetbyaddr() routine is |
| * available to look up networks by their IP addresses. |
| */ |
| /*#define HAS_GETNETBYADDR /**/ |
| |
| /* HAS_GETNETBYNAME: |
| * This symbol, if defined, indicates that the getnetbyname() routine is |
| * available to look up networks by their names. |
| */ |
| /*#define HAS_GETNETBYNAME /**/ |
| |
| /* HAS_GETNETENT: |
| * This symbol, if defined, indicates that the getnetent() routine is |
| * available to look up network names in some data base or another. |
| */ |
| /*#define HAS_GETNETENT /**/ |
| |
| /* HAS_GETNET_PROTOS: |
| * This symbol, if defined, indicates that <netdb.h> includes |
| * prototypes for getnetent(), getnetbyname(), and |
| * getnetbyaddr(). Otherwise, it is up to the program to guess |
| * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
| */ |
| #define HAS_GETNET_PROTOS /**/ |
| |
| /* HAS_GETPAGESIZE: |
| * This symbol, if defined, indicates that the getpagesize system call |
| * is available to get system page size, which is the granularity of |
| * many memory management calls. |
| */ |
| /*#define HAS_GETPAGESIZE /**/ |
| |
| /* HAS_GETPROTOENT: |
| * This symbol, if defined, indicates that the getprotoent() routine is |
| * available to look up protocols in some data base or another. |
| */ |
| /*#define HAS_GETPROTOENT /**/ |
| |
| /* HAS_GETPGRP: |
| * This symbol, if defined, indicates that the getpgrp routine is |
| * available to get the current process group. |
| */ |
| /* USE_BSD_GETPGRP: |
| * This symbol, if defined, indicates that getpgrp needs one |
| * arguments whereas USG one needs none. |
| */ |
| /*#define HAS_GETPGRP /**/ |
| /*#define USE_BSD_GETPGRP /**/ |
| |
| /* HAS_GETPROTOBYNAME: |
| * This symbol, if defined, indicates that the getprotobyname() |
| * routine is available to look up protocols by their name. |
| */ |
| /* HAS_GETPROTOBYNUMBER: |
| * This symbol, if defined, indicates that the getprotobynumber() |
| * routine is available to look up protocols by their number. |
| */ |
| #define HAS_GETPROTOBYNAME /**/ |
| #define HAS_GETPROTOBYNUMBER /**/ |
| |
| /* HAS_GETPROTO_PROTOS: |
| * This symbol, if defined, indicates that <netdb.h> includes |
| * prototypes for getprotoent(), getprotobyname(), and |
| * getprotobyaddr(). Otherwise, it is up to the program to guess |
| * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
| */ |
| #define HAS_GETPROTO_PROTOS /**/ |
| |
| /* HAS_GETPRPWNAM: |
| * This symbol, if defined, indicates that the getprpwnam system call is |
| * available to retrieve protected (shadow) password entries by name. |
| */ |
| /*#define HAS_GETPRPWNAM /**/ |
| |
| /* HAS_GETPWENT: |
| * This symbol, if defined, indicates that the getpwent routine is |
| * available for sequential access of the passwd database. |
| * If this is not available, the older getpw() function may be available. |
| */ |
| /*#define HAS_GETPWENT /**/ |
| |
| /* HAS_GETSERVENT: |
| * This symbol, if defined, indicates that the getservent() routine is |
| * available to look up network services in some data base or another. |
| */ |
| /*#define HAS_GETSERVENT /**/ |
| |
| /* HAS_GETSERV_PROTOS: |
| * This symbol, if defined, indicates that <netdb.h> includes |
| * prototypes for getservent(), getservbyname(), and |
| * getservbyaddr(). Otherwise, it is up to the program to guess |
| * them. See netdbtype.U for probing for various Netdb_xxx_t types. |
| */ |
| #define HAS_GETSERV_PROTOS /**/ |
| |
| /* HAS_GETSPNAM: |
| * This symbol, if defined, indicates that the getspnam system call is |
| * available to retrieve SysV shadow password entries by name. |
| */ |
| /*#define HAS_GETSPNAM /**/ |
| |
| /* HAS_GETSERVBYNAME: |
| * This symbol, if defined, indicates that the getservbyname() |
| * routine is available to look up services by their name. |
| */ |
| /* HAS_GETSERVBYPORT: |
| * This symbol, if defined, indicates that the getservbyport() |
| * routine is available to look up services by their port. |
| */ |
| #define HAS_GETSERVBYNAME /**/ |
| #define HAS_GETSERVBYPORT /**/ |
| |
| /* HAS_GNULIBC: |
| * This symbol, if defined, indicates to the C program that |
| * the GNU C library is being used. A better check is to use |
| * the __GLIBC__ and __GLIBC_MINOR__ symbols supplied with glibc. |
| */ |
| /*#define HAS_GNULIBC /**/ |
| #if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) |
| # define _GNU_SOURCE |
| #endif |
| /* HAS_HASMNTOPT: |
| * This symbol, if defined, indicates that the hasmntopt routine is |
| * available to query the mount options of file systems. |
| */ |
| /*#define HAS_HASMNTOPT /**/ |
| |
| /* HAS_HTONL: |
| * This symbol, if defined, indicates that the htonl() routine (and |
| * friends htons() ntohl() ntohs()) are available to do network |
| * order byte swapping. |
| */ |
| /* HAS_HTONS: |
| * This symbol, if defined, indicates that the htons() routine (and |
| * friends htonl() ntohl() ntohs()) are available to do network |
| * order byte swapping. |
| */ |
| /* HAS_NTOHL: |
| * This symbol, if defined, indicates that the ntohl() routine (and |
| * friends htonl() htons() ntohs()) are available to do network |
| * order byte swapping. |
| */ |
| /* HAS_NTOHS: |
| * This symbol, if defined, indicates that the ntohs() routine (and |
| * friends htonl() htons() ntohl()) are available to do network |
| * order byte swapping. |
| */ |
| #define HAS_HTONL /**/ |
| #define HAS_HTONS /**/ |
| #define HAS_NTOHL /**/ |
| #define HAS_NTOHS /**/ |
| |
| /* HAS_ILOGBL: |
| * This symbol, if defined, indicates that the ilogbl routine is |
| * available. If scalbnl is also present we can emulate frexpl. |
| */ |
| /*#define HAS_ILOGBL /**/ |
| |
| /* HAS_INT64_T: |
| * This symbol will defined if the C compiler supports int64_t. |
| * Usually the <inttypes.h> needs to be included, but sometimes |
| * <sys/types.h> is enough. |
| */ |
| /*#define HAS_INT64_T /**/ |
| |
| /* HAS_ISASCII: |
| * This manifest constant lets the C program know that isascii |
| * is available. |
| */ |
| #define HAS_ISASCII /**/ |
| |
| /* HAS_ISNAN: |
| * This symbol, if defined, indicates that the isnan routine is |
| * available to check whether a double is a NaN. |
| */ |
| /*#define HAS_ISNAN /**/ |
| |
| /* HAS_ISNANL: |
| * This symbol, if defined, indicates that the isnanl routine is |
| * available to check whether a long double is a NaN. |
| */ |
| /*#define HAS_ISNANL /**/ |
| |
| /* HAS_LCHOWN: |
| * This symbol, if defined, indicates that the lchown routine is |
| * available to operate on a symbolic link (instead of following the |
| * link). |
| */ |
| /*#define HAS_LCHOWN /**/ |
| |
| /* HAS_LDBL_DIG: |
| * This symbol, if defined, indicates that this system's <float.h> |
| * or <limits.h> defines the symbol LDBL_DIG, which is the number |
| * of significant digits in a long double precision number. Unlike |
| * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. |
| */ |
| #define HAS_LDBL_DIG /**/ |
| |
| /* HAS_LONG_DOUBLE: |
| * This symbol will be defined if the C compiler supports long |
| * doubles. |
| */ |
| /* LONG_DOUBLESIZE: |
| * This symbol contains the size of a long double, so that the |
| * C preprocessor can make decisions based on it. It is only |
| * defined if the system supports long doubles. |
| */ |
| #define HAS_LONG_DOUBLE /**/ |
| #ifdef HAS_LONG_DOUBLE |
| #define LONG_DOUBLESIZE 10 /**/ |
| #endif |
| |
| /* HAS_LONG_LONG: |
| * This symbol will be defined if the C compiler supports long long. |
| */ |
| /* LONGLONGSIZE: |
| * This symbol contains the size of a long long, so that the |
| * C preprocessor can make decisions based on it. It is only |
| * defined if the system supports long long. |
| */ |
| /*#define HAS_LONG_LONG /**/ |
| #ifdef HAS_LONG_LONG |
| #define LONGLONGSIZE 8 /**/ |
| #endif |
| |
| /* HAS_LSEEK_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the lseek() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern off_t lseek(int, off_t, int); |
| */ |
| #define HAS_LSEEK_PROTO /**/ |
| |
| /* HAS_MADVISE: |
| * This symbol, if defined, indicates that the madvise system call is |
| * available to map a file into memory. |
| */ |
| /*#define HAS_MADVISE /**/ |
| |
| /* HAS_MEMCHR: |
| * This symbol, if defined, indicates that the memchr routine is available |
| * to locate characters within a C string. |
| */ |
| #define HAS_MEMCHR /**/ |
| |
| /* HAS_MKDTEMP: |
| * This symbol, if defined, indicates that the mkdtemp routine is |
| * available to exclusively create a uniquely named temporary directory. |
| */ |
| /*#define HAS_MKDTEMP /**/ |
| |
| /* HAS_MKSTEMP: |
| * This symbol, if defined, indicates that the mkstemp routine is |
| * available to exclusively create and open a uniquely named |
| * temporary file. |
| */ |
| /*#define HAS_MKSTEMP /**/ |
| |
| /* HAS_MKSTEMPS: |
| * This symbol, if defined, indicates that the mkstemps routine is |
| * available to exclusively create and open a uniquely named |
| * (with a suffix) temporary file. |
| */ |
| /*#define HAS_MKSTEMPS /**/ |
| |
| /* HAS_MMAP: |
| * This symbol, if defined, indicates that the mmap system call is |
| * available to map a file into memory. |
| */ |
| /* Mmap_t: |
| * This symbol holds the return type of the mmap() system call |
| * (and simultaneously the type of the first argument). |
| * Usually set to 'void *' or 'cadd_t'. |
| */ |
| /*#define HAS_MMAP /**/ |
| #define Mmap_t void * /**/ |
| |
| /* HAS_MODFL: |
| * This symbol, if defined, indicates that the modfl routine is |
| * available to split a long double x into a fractional part f and |
| * an integer part i such that |f| < 1.0 and (f + i) = x. |
| */ |
| /* HAS_MODFL_POW32_BUG: |
| * This symbol, if defined, indicates that the modfl routine is |
| * broken for long doubles >= pow(2, 32). |
| * For example from 4294967303.150000 one would get 4294967302.000000 |
| * and 1.150000. The bug has been seen in certain versions of glibc, |
| * release 2.2.2 is known to be okay. |
| */ |
| /*#define HAS_MODFL /**/ |
| /*#define HAS_MODFL_POW32_BUG /**/ |
| |
| /* HAS_MPROTECT: |
| * This symbol, if defined, indicates that the mprotect system call is |
| * available to modify the access protection of a memory mapped file. |
| */ |
| /*#define HAS_MPROTECT /**/ |
| |
| /* HAS_MSG: |
| * This symbol, if defined, indicates that the entire msg*(2) library is |
| * supported (IPC mechanism based on message queues). |
| */ |
| /*#define HAS_MSG /**/ |
| |
| /* HAS_STRUCT_MSGHDR: |
| * This symbol, if defined, indicates that the struct msghdr |
| * is supported. |
| */ |
| /*#define HAS_STRUCT_MSGHDR /**/ |
| |
| /* HAS_OFF64_T: |
| * This symbol will be defined if the C compiler supports off64_t. |
| */ |
| /*#define HAS_OFF64_T /**/ |
| |
| /* HAS_OPEN3: |
| * This manifest constant lets the C program know that the three |
| * argument form of open(2) is available. |
| */ |
| /*#define HAS_OPEN3 /**/ |
| |
| /* OLD_PTHREAD_CREATE_JOINABLE: |
| * This symbol, if defined, indicates how to create pthread |
| * in joinable (aka undetached) state. NOTE: not defined |
| * if pthread.h already has defined PTHREAD_CREATE_JOINABLE |
| * (the new version of the constant). |
| * If defined, known values are PTHREAD_CREATE_UNDETACHED |
| * and __UNDETACHED. |
| */ |
| /*#define OLD_PTHREAD_CREATE_JOINABLE /**/ |
| |
| /* HAS_PTHREAD_YIELD: |
| * This symbol, if defined, indicates that the pthread_yield |
| * routine is available to yield the execution of the current |
| * thread. sched_yield is preferable to pthread_yield. |
| */ |
| /* SCHED_YIELD: |
| * This symbol defines the way to yield the execution of |
| * the current thread. Known ways are sched_yield, |
| * pthread_yield, and pthread_yield with NULL. |
| */ |
| /* HAS_SCHED_YIELD: |
| * This symbol, if defined, indicates that the sched_yield |
| * routine is available to yield the execution of the current |
| * thread. sched_yield is preferable to pthread_yield. |
| */ |
| /*#define HAS_PTHREAD_YIELD /**/ |
| #define SCHED_YIELD /**/ |
| /*#define HAS_SCHED_YIELD /**/ |
| |
| /* HAS_PTHREAD_ATTR_SETSCOPE: |
| * This symbol, if defined, indicates that the pthread_attr_setscope |
| * system call is available to set the contention scope attribute of |
| * a thread attribute object. |
| */ |
| /*#define HAS_PTHREAD_ATTR_SETSCOPE / **/ |
| |
| /* HAS_READV: |
| * This symbol, if defined, indicates that the readv routine is |
| * available to do gather reads. You will also need <sys/uio.h> |
| * and there I_SYSUIO. |
| */ |
| /*#define HAS_READV /**/ |
| |
| /* HAS_RECVMSG: |
| * This symbol, if defined, indicates that the recvmsg routine is |
| * available to send structured socket messages. |
| */ |
| /*#define HAS_RECVMSG /**/ |
| |
| /* HAS_SAFE_BCOPY: |
| * This symbol, if defined, indicates that the bcopy routine is available |
| * to copy potentially overlapping memory blocks. Otherwise you should |
| * probably use memmove() or memcpy(). If neither is defined, roll your |
| * own version. |
| */ |
| /*#define HAS_SAFE_BCOPY /**/ |
| |
| /* HAS_SAFE_MEMCPY: |
| * This symbol, if defined, indicates that the memcpy routine is available |
| * to copy potentially overlapping memory blocks. Otherwise you should |
| * probably use memmove() or memcpy(). If neither is defined, roll your |
| * own version. |
| */ |
| /*#define HAS_SAFE_MEMCPY /**/ |
| |
| /* HAS_SANE_MEMCMP: |
| * This symbol, if defined, indicates that the memcmp routine is available |
| * and can be used to compare relative magnitudes of chars with their high |
| * bits set. If it is not defined, roll your own version. |
| */ |
| #define HAS_SANE_MEMCMP /**/ |
| |
| /* HAS_SBRK_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the sbrk() function. Otherwise, it is up |
| * to the program to supply one. Good guesses are |
| * extern void* sbrk(int); |
| * extern void* sbrk(size_t); |
| */ |
| /*#define HAS_SBRK_PROTO /**/ |
| |
| /* HAS_SEM: |
| * This symbol, if defined, indicates that the entire sem*(2) library is |
| * supported. |
| */ |
| /*#define HAS_SEM /**/ |
| |
| /* HAS_SCALBNL: |
| * This symbol, if defined, indicates that the scalbnl routine is |
| * available. If ilogbl is also present we can emulate frexpl. |
| */ |
| /*#define HAS_SCALBNL /**/ |
| |
| /* HAS_SENDMSG: |
| * This symbol, if defined, indicates that the sendmsg routine is |
| * available to send structured socket messages. |
| */ |
| /*#define HAS_SENDMSG /**/ |
| |
| /* HAS_SETGRENT: |
| * This symbol, if defined, indicates that the setgrent routine is |
| * available for initializing sequential access of the group database. |
| */ |
| /*#define HAS_SETGRENT /**/ |
| |
| /* HAS_SETGROUPS: |
| * This symbol, if defined, indicates that the setgroups() routine is |
| * available to set the list of process groups. If unavailable, multiple |
| * groups are probably not supported. |
| */ |
| /*#define HAS_SETGROUPS /**/ |
| |
| /* HAS_SETHOSTENT: |
| * This symbol, if defined, indicates that the sethostent() routine is |
| * available. |
| */ |
| /*#define HAS_SETHOSTENT /**/ |
| |
| /* HAS_SETITIMER: |
| * This symbol, if defined, indicates that the setitimer routine is |
| * available to set interval timers. |
| */ |
| /*#define HAS_SETITIMER /**/ |
| |
| /* HAS_SETNETENT: |
| * This symbol, if defined, indicates that the setnetent() routine is |
| * available. |
| */ |
| /*#define HAS_SETNETENT /**/ |
| |
| /* HAS_SETPROTOENT: |
| * This symbol, if defined, indicates that the setprotoent() routine is |
| * available. |
| */ |
| /*#define HAS_SETPROTOENT /**/ |
| |
| /* HAS_SETPGRP: |
| * This symbol, if defined, indicates that the setpgrp routine is |
| * available to set the current process group. |
| */ |
| /* USE_BSD_SETPGRP: |
| * This symbol, if defined, indicates that setpgrp needs two |
| * arguments whereas USG one needs none. See also HAS_SETPGID |
| * for a POSIX interface. |
| */ |
| /*#define HAS_SETPGRP /**/ |
| /*#define USE_BSD_SETPGRP /**/ |
| |
| /* HAS_SETPROCTITLE: |
| * This symbol, if defined, indicates that the setproctitle routine is |
| * available to set process title. |
| */ |
| /*#define HAS_SETPROCTITLE /**/ |
| |
| /* HAS_SETPWENT: |
| * This symbol, if defined, indicates that the setpwent routine is |
| * available for initializing sequential access of the passwd database. |
| */ |
| /*#define HAS_SETPWENT /**/ |
| |
| /* HAS_SETSERVENT: |
| * This symbol, if defined, indicates that the setservent() routine is |
| * available. |
| */ |
| /*#define HAS_SETSERVENT /**/ |
| |
| /* HAS_SETVBUF: |
| * This symbol, if defined, indicates that the setvbuf routine is |
| * available to change buffering on an open stdio stream. |
| * to a line-buffered mode. |
| */ |
| #define HAS_SETVBUF /**/ |
| |
| /* USE_SFIO: |
| * This symbol, if defined, indicates that sfio should |
| * be used. |
| */ |
| /*#define USE_SFIO /**/ |
| |
| /* HAS_SHM: |
| * This symbol, if defined, indicates that the entire shm*(2) library is |
| * supported. |
| */ |
| /*#define HAS_SHM /**/ |
| |
| /* HAS_SIGACTION: |
| * This symbol, if defined, indicates that Vr4's sigaction() routine |
| * is available. |
| */ |
| /*#define HAS_SIGACTION /**/ |
| |
| /* HAS_SIGSETJMP: |
| * This variable indicates to the C program that the sigsetjmp() |
| * routine is available to save the calling process's registers |
| * and stack environment for later use by siglongjmp(), and |
| * to optionally save the process's signal mask. See |
| * Sigjmp_buf, Sigsetjmp, and Siglongjmp. |
| */ |
| /* Sigjmp_buf: |
| * This is the buffer type to be used with Sigsetjmp and Siglongjmp. |
| */ |
| /* Sigsetjmp: |
| * This macro is used in the same way as sigsetjmp(), but will invoke |
| * traditional setjmp() if sigsetjmp isn't available. |
| * See HAS_SIGSETJMP. |
| */ |
| /* Siglongjmp: |
| * This macro is used in the same way as siglongjmp(), but will invoke |
| * traditional longjmp() if siglongjmp isn't available. |
| * See HAS_SIGSETJMP. |
| */ |
| /*#define HAS_SIGSETJMP /**/ |
| #ifdef HAS_SIGSETJMP |
| #define Sigjmp_buf sigjmp_buf |
| #define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) |
| #define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) |
| #else |
| #define Sigjmp_buf jmp_buf |
| #define Sigsetjmp(buf,save_mask) setjmp((buf)) |
| #define Siglongjmp(buf,retval) longjmp((buf),(retval)) |
| #endif |
| |
| /* HAS_STATIC_INLINE: |
| * This symbol, if defined, indicates that the C compiler supports |
| * C99-style static inline. That is, the function can't be called |
| * from another translation unit. |
| */ |
| /* PERL_STATIC_INLINE: |
| * This symbol gives the best-guess incantation to use for static |
| * inline functions. If HAS_STATIC_INLINE is defined, this will |
| * give C99-style inline. If HAS_STATIC_INLINE is not defined, |
| * this will give a plain 'static'. It will always be defined |
| * to something that gives static linkage. |
| * Possibilities include |
| * static inline (c99) |
| * static __inline__ (gcc -ansi) |
| * static __inline (MSVC) |
| * static _inline (older MSVC) |
| * static (c89 compilers) |
| */ |
| /*#define HAS_STATIC_INLINE / **/ |
| #define PERL_STATIC_INLINE static /**/ |
| |
| /* HAS_SOCKET: |
| * This symbol, if defined, indicates that the BSD socket interface is |
| * supported. |
| */ |
| /* HAS_SOCKETPAIR: |
| * This symbol, if defined, indicates that the BSD socketpair() call is |
| * supported. |
| */ |
| /* HAS_MSG_CTRUNC: |
| * This symbol, if defined, indicates that the MSG_CTRUNC is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_MSG_DONTROUTE: |
| * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_MSG_OOB: |
| * This symbol, if defined, indicates that the MSG_OOB is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_MSG_PEEK: |
| * This symbol, if defined, indicates that the MSG_PEEK is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_MSG_PROXY: |
| * This symbol, if defined, indicates that the MSG_PROXY is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| /* HAS_SCM_RIGHTS: |
| * This symbol, if defined, indicates that the SCM_RIGHTS is supported. |
| * Checking just with #ifdef might not be enough because this symbol |
| * has been known to be an enum. |
| */ |
| #define HAS_SOCKET /**/ |
| /*#define HAS_SOCKETPAIR /**/ |
| /*#define HAS_MSG_CTRUNC /**/ |
| /*#define HAS_MSG_DONTROUTE /**/ |
| /*#define HAS_MSG_OOB /**/ |
| /*#define HAS_MSG_PEEK /**/ |
| /*#define HAS_MSG_PROXY /**/ |
| /*#define HAS_SCM_RIGHTS /**/ |
| |
| /* HAS_SOCKS5_INIT: |
| * This symbol, if defined, indicates that the socks5_init routine is |
| * available to initialize SOCKS 5. |
| */ |
| /*#define HAS_SOCKS5_INIT /**/ |
| |
| /* HAS_SQRTL: |
| * This symbol, if defined, indicates that the sqrtl routine is |
| * available to do long double square roots. |
| */ |
| /*#define HAS_SQRTL /**/ |
| |
| /* USE_STAT_BLOCKS: |
| * This symbol is defined if this system has a stat structure declaring |
| * st_blksize and st_blocks. |
| */ |
| #ifndef USE_STAT_BLOCKS |
| /*#define USE_STAT_BLOCKS /**/ |
| #endif |
| |
| /* HAS_STRUCT_STATFS_F_FLAGS: |
| * This symbol, if defined, indicates that the struct statfs |
| * does have the f_flags member containing the mount flags of |
| * the filesystem containing the file. |
| * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3), |
| * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not |
| * have statfs() and struct statfs, they have ustat() and getmnt() |
| * with struct ustat and struct fs_data. |
| */ |
| /*#define HAS_STRUCT_STATFS_F_FLAGS /**/ |
| |
| /* HAS_STRUCT_STATFS: |
| * This symbol, if defined, indicates that the struct statfs |
| * to do statfs() is supported. |
| */ |
| /*#define HAS_STRUCT_STATFS /**/ |
| |
| /* HAS_FSTATVFS: |
| * This symbol, if defined, indicates that the fstatvfs routine is |
| * available to stat filesystems by file descriptors. |
| */ |
| /*#define HAS_FSTATVFS /**/ |
| |
| /* USE_STDIO_PTR: |
| * This symbol is defined if the _ptr and _cnt fields (or similar) |
| * of the stdio FILE structure can be used to access the stdio buffer |
| * for a file handle. If this is defined, then the FILE_ptr(fp) |
| * and FILE_cnt(fp) macros will also be defined and should be used |
| * to access these fields. |
| */ |
| /* FILE_ptr: |
| * This macro is used to access the _ptr field (or equivalent) of the |
| * FILE structure pointed to by its argument. This macro will always be |
| * defined if USE_STDIO_PTR is defined. |
| */ |
| /* STDIO_PTR_LVALUE: |
| * This symbol is defined if the FILE_ptr macro can be used as an |
| * lvalue. |
| */ |
| /* FILE_cnt: |
| * This macro is used to access the _cnt field (or equivalent) of the |
| * FILE structure pointed to by its argument. This macro will always be |
| * defined if USE_STDIO_PTR is defined. |
| */ |
| /* STDIO_CNT_LVALUE: |
| * This symbol is defined if the FILE_cnt macro can be used as an |
| * lvalue. |
| */ |
| /* STDIO_PTR_LVAL_SETS_CNT: |
| * This symbol is defined if using the FILE_ptr macro as an lvalue |
| * to increase the pointer by n has the side effect of decreasing the |
| * value of File_cnt(fp) by n. |
| */ |
| /* STDIO_PTR_LVAL_NOCHANGE_CNT: |
| * This symbol is defined if using the FILE_ptr macro as an lvalue |
| * to increase the pointer by n leaves File_cnt(fp) unchanged. |
| */ |
| /*#define USE_STDIO_PTR /**/ |
| #ifdef USE_STDIO_PTR |
| #define FILE_ptr(fp) ((fp)->_ptr) |
| /*#define STDIO_PTR_LVALUE /**/ |
| #define FILE_cnt(fp) ((fp)->_cnt) |
| /*#define STDIO_CNT_LVALUE /**/ |
| /*#define STDIO_PTR_LVAL_SETS_CNT /**/ |
| /*#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/ |
| #endif |
| |
| /* USE_STDIO_BASE: |
| * This symbol is defined if the _base field (or similar) of the |
| * stdio FILE structure can be used to access the stdio buffer for |
| * a file handle. If this is defined, then the FILE_base(fp) macro |
| * will also be defined and should be used to access this field. |
| * Also, the FILE_bufsiz(fp) macro will be defined and should be used |
| * to determine the number of bytes in the buffer. USE_STDIO_BASE |
| * will never be defined unless USE_STDIO_PTR is. |
| */ |
| /* FILE_base: |
| * This macro is used to access the _base field (or equivalent) of the |
| * FILE structure pointed to by its argument. This macro will always be |
| * defined if USE_STDIO_BASE is defined. |
| */ |
| /* FILE_bufsiz: |
| * This macro is used to determine the number of bytes in the I/O |
| * buffer pointed to by _base field (or equivalent) of the FILE |
| * structure pointed to its argument. This macro will always be defined |
| * if USE_STDIO_BASE is defined. |
| */ |
| /*#define USE_STDIO_BASE /**/ |
| #ifdef USE_STDIO_BASE |
| #define FILE_base(fp) ((fp)->_base) |
| #define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base) |
| #endif |
| |
| /* HAS_STRERROR: |
| * This symbol, if defined, indicates that the strerror routine is |
| * available to translate error numbers to strings. See the writeup |
| * of Strerror() in this file before you try to define your own. |
| */ |
| /* HAS_SYS_ERRLIST: |
| * This symbol, if defined, indicates that the sys_errlist array is |
| * available to translate error numbers to strings. The extern int |
| * sys_nerr gives the size of that table. |
| */ |
| /* Strerror: |
| * This preprocessor symbol is defined as a macro if strerror() is |
| * not available to translate error numbers to strings but sys_errlist[] |
| * array is there. |
| */ |
| #define HAS_STRERROR /**/ |
| #define HAS_SYS_ERRLIST /**/ |
| #define Strerror(e) strerror(e) |
| |
| /* HAS_STRTOLD: |
| * This symbol, if defined, indicates that the strtold routine is |
| * available to convert strings to long doubles. |
| */ |
| /*#define HAS_STRTOLD /**/ |
| |
| /* HAS_STRTOLL: |
| * This symbol, if defined, indicates that the strtoll routine is |
| * available to convert strings to long longs. |
| */ |
| /*#define HAS_STRTOLL /**/ |
| |
| /* HAS_STRTOQ: |
| * This symbol, if defined, indicates that the strtoq routine is |
| * available to convert strings to long longs (quads). |
| */ |
| /*#define HAS_STRTOQ /**/ |
| |
| /* HAS_STRTOUL: |
| * This symbol, if defined, indicates that the strtoul routine is |
| * available to provide conversion of strings to unsigned long. |
| */ |
| #define HAS_STRTOUL /**/ |
| |
| /* HAS_STRTOULL: |
| * This symbol, if defined, indicates that the strtoull routine is |
| * available to convert strings to unsigned long longs. |
| */ |
| /*#define HAS_STRTOULL /**/ |
| |
| /* HAS_STRTOUQ: |
| * This symbol, if defined, indicates that the strtouq routine is |
| * available to convert strings to unsigned long longs (quads). |
| */ |
| /*#define HAS_STRTOUQ /**/ |
| |
| /* HAS_TELLDIR_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the telldir() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern long telldir(DIR*); |
| */ |
| #define HAS_TELLDIR_PROTO /**/ |
| |
| /* Time_t: |
| * This symbol holds the type returned by time(). It can be long, |
| * or time_t on BSD sites (in which case <sys/types.h> should be |
| * included). |
| */ |
| #define Time_t time_t /* Time type */ |
| |
| /* HAS_TIMES: |
| * This symbol, if defined, indicates that the times() routine exists. |
| * Note that this became obsolete on some systems (SUNOS), which now |
| * use getrusage(). It may be necessary to include <sys/times.h>. |
| */ |
| /*#define HAS_TIMES /**/ |
| |
| /* HAS_UALARM: |
| * This symbol, if defined, indicates that the ualarm routine is |
| * available to do alarms with microsecond granularity. |
| */ |
| /*#define HAS_UALARM /**/ |
| |
| /* HAS_UNION_SEMUN: |
| * This symbol, if defined, indicates that the union semun is |
| * defined by including <sys/sem.h>. If not, the user code |
| * probably needs to define it as: |
| * union semun { |
| * int val; |
| * struct semid_ds *buf; |
| * unsigned short *array; |
| * } |
| */ |
| /* USE_SEMCTL_SEMUN: |
| * This symbol, if defined, indicates that union semun is |
| * used for semctl IPC_STAT. |
| */ |
| /* USE_SEMCTL_SEMID_DS: |
| * This symbol, if defined, indicates that struct semid_ds * is |
| * used for semctl IPC_STAT. |
| */ |
| #define HAS_UNION_SEMUN /**/ |
| /*#define USE_SEMCTL_SEMUN /**/ |
| /*#define USE_SEMCTL_SEMID_DS /**/ |
| |
| /* HAS_USTAT: |
| * This symbol, if defined, indicates that the ustat system call is |
| * available to query file system statistics by dev_t. |
| */ |
| /*#define HAS_USTAT /**/ |
| |
| /* HAS_VFORK: |
| * This symbol, if defined, indicates that vfork() exists. |
| */ |
| /*#define HAS_VFORK /**/ |
| |
| /* Signal_t: |
| * This symbol's value is either "void" or "int", corresponding to the |
| * appropriate return type of a signal handler. Thus, you can declare |
| * a signal handler using "Signal_t (*handler)()", and define the |
| * handler using "Signal_t handler(sig)". |
| */ |
| #define Signal_t void /* Signal handler's return type */ |
| |
| /* HAS_VPRINTF: |
| * This symbol, if defined, indicates that the vprintf routine is available |
| * to printf with a pointer to an argument list. If unavailable, you |
| * may need to write your own, probably in terms of _doprnt(). |
| */ |
| /* USE_CHAR_VSPRINTF: |
| * This symbol is defined if this system has vsprintf() returning type |
| * (char*). The trend seems to be to declare it as "int vsprintf()". It |
| * is up to the package author to declare vsprintf correctly based on the |
| * symbol. |
| */ |
| #define HAS_VPRINTF /**/ |
| /*#define USE_CHAR_VSPRINTF /**/ |
| |
| /* HAS_WRITEV: |
| * This symbol, if defined, indicates that the writev routine is |
| * available to do scatter writes. |
| */ |
| /*#define HAS_WRITEV /**/ |
| |
| /* USE_DYNAMIC_LOADING: |
| * This symbol, if defined, indicates that dynamic loading of |
| * some sort is available. |
| */ |
| #define USE_DYNAMIC_LOADING /**/ |
| |
| /* DOUBLESIZE: |
| * This symbol contains the size of a double, so that the C preprocessor |
| * can make decisions based on it. |
| */ |
| #define DOUBLESIZE 8 /**/ |
| |
| /* EBCDIC: |
| * This symbol, if defined, indicates that this system uses |
| * EBCDIC encoding. |
| */ |
| /*#define EBCDIC /**/ |
| |
| /* FFLUSH_NULL: |
| * This symbol, if defined, tells that fflush(NULL) does flush |
| * all pending stdio output. |
| */ |
| /* FFLUSH_ALL: |
| * This symbol, if defined, tells that to flush |
| * all pending stdio output one must loop through all |
| * the stdio file handles stored in an array and fflush them. |
| * Note that if fflushNULL is defined, fflushall will not |
| * even be probed for and will be left undefined. |
| */ |
| #define FFLUSH_NULL /**/ |
| /*#define FFLUSH_ALL /**/ |
| |
| /* Fpos_t: |
| * This symbol holds the type used to declare file positions in libc. |
| * It can be fpos_t, long, uint, etc... It may be necessary to include |
| * <sys/types.h> to get any typedef'ed information. |
| */ |
| #define Fpos_t fpos_t /* File position type */ |
| |
| /* Gid_t_f: |
| * This symbol defines the format string used for printing a Gid_t. |
| */ |
| #define Gid_t_f "ld" /**/ |
| |
| /* Gid_t_sign: |
| * This symbol holds the signedess of a Gid_t. |
| * 1 for unsigned, -1 for signed. |
| */ |
| #define Gid_t_sign -1 /* GID sign */ |
| |
| /* Gid_t_size: |
| * This symbol holds the size of a Gid_t in bytes. |
| */ |
| #define Gid_t_size 4 /* GID size */ |
| |
| /* Gid_t: |
| * This symbol holds the return type of getgid() and the type of |
| * argument to setrgid() and related functions. Typically, |
| * it is the type of group ids in the kernel. It can be int, ushort, |
| * gid_t, etc... It may be necessary to include <sys/types.h> to get |
| * any typedef'ed information. |
| */ |
| #define Gid_t gid_t /* Type for getgid(), etc... */ |
| |
| /* Groups_t: |
| * This symbol holds the type used for the second argument to |
| * getgroups() and setgroups(). Usually, this is the same as |
| * gidtype (gid_t) , but sometimes it isn't. |
| * It can be int, ushort, gid_t, etc... |
| * It may be necessary to include <sys/types.h> to get any |
| * typedef'ed information. This is only required if you have |
| * getgroups() or setgroups().. |
| */ |
| #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) |
| #define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */ |
| #endif |
| |
| /* DB_Prefix_t: |
| * This symbol contains the type of the prefix structure element |
| * in the <db.h> header file. In older versions of DB, it was |
| * int, while in newer ones it is u_int32_t. |
| */ |
| /* DB_Hash_t: |
| * This symbol contains the type of the prefix structure element |
| * in the <db.h> header file. In older versions of DB, it was |
| * int, while in newer ones it is size_t. |
| */ |
| /* DB_VERSION_MAJOR_CFG: |
| * This symbol, if defined, defines the major version number of |
| * Berkeley DB found in the <db.h> header when Perl was configured. |
| */ |
| /* DB_VERSION_MINOR_CFG: |
| * This symbol, if defined, defines the minor version number of |
| * Berkeley DB found in the <db.h> header when Perl was configured. |
| * For DB version 1 this is always 0. |
| */ |
| /* DB_VERSION_PATCH_CFG: |
| * This symbol, if defined, defines the patch version number of |
| * Berkeley DB found in the <db.h> header when Perl was configured. |
| * For DB version 1 this is always 0. |
| */ |
| #define DB_Hash_t int /**/ |
| #define DB_Prefix_t int /**/ |
| #define DB_VERSION_MAJOR_CFG undef /**/ |
| #define DB_VERSION_MINOR_CFG undef /**/ |
| #define DB_VERSION_PATCH_CFG undef /**/ |
| |
| /* I_GRP: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <grp.h>. |
| */ |
| /* GRPASSWD: |
| * This symbol, if defined, indicates to the C program that struct group |
| * in <grp.h> contains gr_passwd. |
| */ |
| /*#define I_GRP /**/ |
| /*#define GRPASSWD /**/ |
| |
| /* I_IEEEFP: |
| * This symbol, if defined, indicates that <ieeefp.h> exists and |
| * should be included. |
| */ |
| /*#define I_IEEEFP /**/ |
| |
| /* I_INTTYPES: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <inttypes.h>. |
| */ |
| /*#define I_INTTYPES /**/ |
| |
| /* I_LIBUTIL: |
| * This symbol, if defined, indicates that <libutil.h> exists and |
| * should be included. |
| */ |
| /*#define I_LIBUTIL /**/ |
| |
| /* I_MACH_CTHREADS: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <mach/cthreads.h>. |
| */ |
| /*#define I_MACH_CTHREADS /**/ |
| |
| /* I_MNTENT: |
| * This symbol, if defined, indicates that <mntent.h> exists and |
| * should be included. |
| */ |
| /*#define I_MNTENT /**/ |
| |
| /* I_NETDB: |
| * This symbol, if defined, indicates that <netdb.h> exists and |
| * should be included. |
| */ |
| #define I_NETDB /**/ |
| |
| /* I_NETINET_TCP: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <netinet/tcp.h>. |
| */ |
| /*#define I_NETINET_TCP /**/ |
| |
| /* I_POLL: |
| * This symbol, if defined, indicates that <poll.h> exists and |
| * should be included. |
| */ |
| /*#define I_POLL /**/ |
| |
| /* I_PROT: |
| * This symbol, if defined, indicates that <prot.h> exists and |
| * should be included. |
| */ |
| /*#define I_PROT /**/ |
| |
| /* I_PTHREAD: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <pthread.h>. |
| */ |
| /*#define I_PTHREAD /**/ |
| |
| /* I_PWD: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <pwd.h>. |
| */ |
| /* PWQUOTA: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_quota. |
| */ |
| /* PWAGE: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_age. |
| */ |
| /* PWCHANGE: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_change. |
| */ |
| /* PWCLASS: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_class. |
| */ |
| /* PWEXPIRE: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_expire. |
| */ |
| /* PWCOMMENT: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_comment. |
| */ |
| /* PWGECOS: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_gecos. |
| */ |
| /* PWPASSWD: |
| * This symbol, if defined, indicates to the C program that struct passwd |
| * contains pw_passwd. |
| */ |
| /*#define I_PWD /**/ |
| /*#define PWQUOTA /**/ |
| /*#define PWAGE /**/ |
| /*#define PWCHANGE /**/ |
| /*#define PWCLASS /**/ |
| /*#define PWEXPIRE /**/ |
| /*#define PWCOMMENT /**/ |
| /*#define PWGECOS /**/ |
| /*#define PWPASSWD /**/ |
| |
| /* I_SHADOW: |
| * This symbol, if defined, indicates that <shadow.h> exists and |
| * should be included. |
| */ |
| /*#define I_SHADOW /**/ |
| |
| /* I_SOCKS: |
| * This symbol, if defined, indicates that <socks.h> exists and |
| * should be included. |
| */ |
| /*#define I_SOCKS /**/ |
| |
| /* I_SUNMATH: |
| * This symbol, if defined, indicates that <sunmath.h> exists and |
| * should be included. |
| */ |
| /*#define I_SUNMATH /**/ |
| |
| /* I_SYSLOG: |
| * This symbol, if defined, indicates that <syslog.h> exists and |
| * should be included. |
| */ |
| /*#define I_SYSLOG /**/ |
| |
| /* I_SYSMODE: |
| * This symbol, if defined, indicates that <sys/mode.h> exists and |
| * should be included. |
| */ |
| /*#define I_SYSMODE /**/ |
| |
| /* I_SYS_MOUNT: |
| * This symbol, if defined, indicates that <sys/mount.h> exists and |
| * should be included. |
| */ |
| /*#define I_SYS_MOUNT /**/ |
| |
| /* I_SYS_STATFS: |
| * This symbol, if defined, indicates that <sys/statfs.h> exists. |
| */ |
| /*#define I_SYS_STATFS /**/ |
| |
| /* I_SYS_STATVFS: |
| * This symbol, if defined, indicates that <sys/statvfs.h> exists and |
| * should be included. |
| */ |
| /*#define I_SYS_STATVFS /**/ |
| |
| /* I_SYSUIO: |
| * This symbol, if defined, indicates that <sys/uio.h> exists and |
| * should be included. |
| */ |
| /*#define I_SYSUIO /**/ |
| |
| /* I_SYSUTSNAME: |
| * This symbol, if defined, indicates that <sys/utsname.h> exists and |
| * should be included. |
| */ |
| #define I_SYSUTSNAME /**/ |
| |
| /* I_SYS_VFS: |
| * This symbol, if defined, indicates that <sys/vfs.h> exists and |
| * should be included. |
| */ |
| /*#define I_SYS_VFS /**/ |
| |
| /* I_TIME: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <time.h>. |
| */ |
| /* I_SYS_TIME: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/time.h>. |
| */ |
| /* I_SYS_TIME_KERNEL: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <sys/time.h> with KERNEL defined. |
| */ |
| #define I_TIME /**/ |
| /*#define I_SYS_TIME /**/ |
| /*#define I_SYS_TIME_KERNEL /**/ |
| |
| /* I_USTAT: |
| * This symbol, if defined, indicates that <ustat.h> exists and |
| * should be included. |
| */ |
| /*#define I_USTAT /**/ |
| |
| /* PERL_INC_VERSION_LIST: |
| * This variable specifies the list of subdirectories in over |
| * which perl.c:incpush() and lib/lib.pm will automatically |
| * search when adding directories to @INC, in a format suitable |
| * for a C initialization string. See the inc_version_list entry |
| * in Porting/Glossary for more details. |
| */ |
| #define PERL_INC_VERSION_LIST 0 /**/ |
| |
| /* INSTALL_USR_BIN_PERL: |
| * This symbol, if defined, indicates that Perl is to be installed |
| * also as /usr/bin/perl. |
| */ |
| /*#define INSTALL_USR_BIN_PERL /**/ |
| |
| /* PERL_PRIfldbl: |
| * This symbol, if defined, contains the string used by stdio to |
| * format long doubles (format 'f') for output. |
| */ |
| /* PERL_PRIgldbl: |
| * This symbol, if defined, contains the string used by stdio to |
| * format long doubles (format 'g') for output. |
| */ |
| /* PERL_PRIeldbl: |
| * This symbol, if defined, contains the string used by stdio to |
| * format long doubles (format 'e') for output. |
| */ |
| /* PERL_SCNfldbl: |
| * This symbol, if defined, contains the string used by stdio to |
| * format long doubles (format 'f') for input. |
| */ |
| /*#define PERL_PRIfldbl "f" /**/ |
| /*#define PERL_PRIgldbl "g" /**/ |
| /*#define PERL_PRIeldbl "e" /**/ |
| /*#define PERL_SCNfldbl undef /**/ |
| |
| #$d_PRIfldbl PERL_PRIfldbl $sPRIfldbl /**/ |
| #$d_PRIgldbl PERL_PRIgldbl $sPRIgldbl /**/ |
| #$d_PRIeldbl PERL_PRIeldbl $sPRIeldbl /**/ |
| |
| /*#$d_SCNfldbl PERL_SCNfldbl $sSCNfldbl /**/ |
| |
| /* Off_t: |
| * This symbol holds the type used to declare offsets in the kernel. |
| * It can be int, long, off_t, etc... It may be necessary to include |
| * <sys/types.h> to get any typedef'ed information. |
| */ |
| /* LSEEKSIZE: |
| * This symbol holds the number of bytes used by the Off_t. |
| */ |
| /* Off_t_size: |
| * This symbol holds the number of bytes used by the Off_t. |
| */ |
| #define Off_t off_t /* <offset> type */ |
| #define LSEEKSIZE 4 /* <offset> size */ |
| #define Off_t_size 4 /* <offset> size */ |
| |
| /* Free_t: |
| * This variable contains the return type of free(). It is usually |
| * void, but occasionally int. |
| */ |
| /* Malloc_t: |
| * This symbol is the type of pointer returned by malloc and realloc. |
| */ |
| #define Malloc_t void * /**/ |
| #define Free_t void /**/ |
| |
| /* MYMALLOC: |
| * This symbol, if defined, indicates that we're using our own malloc. |
| */ |
| /*#define MYMALLOC /**/ |
| |
| /* Mode_t: |
| * This symbol holds the type used to declare file modes |
| * for systems calls. It is usually mode_t, but may be |
| * int or unsigned short. It may be necessary to include <sys/types.h> |
| * to get any typedef'ed information. |
| */ |
| #define Mode_t mode_t /* file mode parameter for system calls */ |
| |
| /* VAL_O_NONBLOCK: |
| * This symbol is to be used during open() or fcntl(F_SETFL) to turn on |
| * non-blocking I/O for the file descriptor. Note that there is no way |
| * back, i.e. you cannot turn it blocking again this way. If you wish to |
| * alternatively switch between blocking and non-blocking, use the |
| * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. |
| */ |
| /* VAL_EAGAIN: |
| * This symbol holds the errno error code set by read() when no data was |
| * present on the non-blocking file descriptor. |
| */ |
| /* RD_NODATA: |
| * This symbol holds the return code from read() when no data is present |
| * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is |
| * not defined, then you can't distinguish between no data and EOF by |
| * issuing a read(). You'll have to find another way to tell for sure! |
| */ |
| /* EOF_NONBLOCK: |
| * This symbol, if defined, indicates to the C program that a read() on |
| * a non-blocking file descriptor will return 0 on EOF, and not the value |
| * held in RD_NODATA (-1 usually, in that case!). |
| */ |
| #define VAL_O_NONBLOCK O_NONBLOCK |
| #define VAL_EAGAIN EAGAIN |
| #define RD_NODATA -1 |
| #define EOF_NONBLOCK |
| |
| /* NEED_VA_COPY: |
| * This symbol, if defined, indicates that the system stores |
| * the variable argument list datatype, va_list, in a format |
| * that cannot be copied by simple assignment, so that some |
| * other means must be used when copying is required. |
| * As such systems vary in their provision (or non-provision) |
| * of copying mechanisms, handy.h defines a platform- |
| * independent macro, Perl_va_copy(src, dst), to do the job. |
| */ |
| /*#define NEED_VA_COPY /**/ |
| |
| /* Netdb_host_t: |
| * This symbol holds the type used for the 1st argument |
| * to gethostbyaddr(). |
| */ |
| /* Netdb_hlen_t: |
| * This symbol holds the type used for the 2nd argument |
| * to gethostbyaddr(). |
| */ |
| /* Netdb_name_t: |
| * This symbol holds the type used for the argument to |
| * gethostbyname(). |
| */ |
| /* Netdb_net_t: |
| * This symbol holds the type used for the 1st argument to |
| * getnetbyaddr(). |
| */ |
| #define Netdb_host_t char * /**/ |
| #define Netdb_hlen_t int /**/ |
| #define Netdb_name_t char * /**/ |
| #define Netdb_net_t long /**/ |
| |
| /* PERL_OTHERLIBDIRS: |
| * This variable contains a colon-separated set of paths for the perl |
| * binary to search for additional library files or modules. |
| * These directories will be tacked to the end of @INC. |
| * Perl will automatically search below each path for version- |
| * and architecture-specific directories. See PERL_INC_VERSION_LIST |
| * for more details. |
| */ |
| /*#define PERL_OTHERLIBDIRS "undef" /**/ |
| |
| /* IVTYPE: |
| * This symbol defines the C type used for Perl's IV. |
| */ |
| /* UVTYPE: |
| * This symbol defines the C type used for Perl's UV. |
| */ |
| /* I8TYPE: |
| * This symbol defines the C type used for Perl's I8. |
| */ |
| /* U8TYPE: |
| * This symbol defines the C type used for Perl's U8. |
| */ |
| /* I16TYPE: |
| * This symbol defines the C type used for Perl's I16. |
| */ |
| /* U16TYPE: |
| * This symbol defines the C type used for Perl's U16. |
| */ |
| /* I32TYPE: |
| * This symbol defines the C type used for Perl's I32. |
| */ |
| /* U32TYPE: |
| * This symbol defines the C type used for Perl's U32. |
| */ |
| /* I64TYPE: |
| * This symbol defines the C type used for Perl's I64. |
| */ |
| /* U64TYPE: |
| * This symbol defines the C type used for Perl's U64. |
| */ |
| /* NVTYPE: |
| * This symbol defines the C type used for Perl's NV. |
| */ |
| /* IVSIZE: |
| * This symbol contains the sizeof(IV). |
| */ |
| /* UVSIZE: |
| * This symbol contains the sizeof(UV). |
| */ |
| /* I8SIZE: |
| * This symbol contains the sizeof(I8). |
| */ |
| /* U8SIZE: |
| * This symbol contains the sizeof(U8). |
| */ |
| /* I16SIZE: |
| * This symbol contains the sizeof(I16). |
| */ |
| /* U16SIZE: |
| * This symbol contains the sizeof(U16). |
| */ |
| /* I32SIZE: |
| * This symbol contains the sizeof(I32). |
| */ |
| /* U32SIZE: |
| * This symbol contains the sizeof(U32). |
| */ |
| /* I64SIZE: |
| * This symbol contains the sizeof(I64). |
| */ |
| /* U64SIZE: |
| * This symbol contains the sizeof(U64). |
| */ |
| /* NVSIZE: |
| * This symbol contains the sizeof(NV). |
| */ |
| /* NV_PRESERVES_UV: |
| * This symbol, if defined, indicates that a variable of type NVTYPE |
| * can preserve all the bits of a variable of type UVTYPE. |
| */ |
| /* NV_PRESERVES_UV_BITS: |
| * This symbol contains the number of bits a variable of type NVTYPE |
| * can preserve of a variable of type UVTYPE. |
| */ |
| /* NV_ZERO_IS_ALLBITS_ZERO: |
| * This symbol, if defined, indicates that a variable of type NVTYPE |
| * stores 0.0 in memory as all bits zero. |
| */ |
| #define IVTYPE long /**/ |
| #define UVTYPE unsigned long /**/ |
| #define I8TYPE char /**/ |
| #define U8TYPE unsigned char /**/ |
| #define I16TYPE short /**/ |
| #define U16TYPE unsigned short /**/ |
| #define I32TYPE long /**/ |
| #define U32TYPE unsigned long /**/ |
| #ifdef HAS_QUAD |
| #define I64TYPE __int64 /**/ |
| #define U64TYPE unsigned __int64 /**/ |
| #endif |
| #define NVTYPE double /**/ |
| #define IVSIZE 4 /**/ |
| #define UVSIZE 4 /**/ |
| #define I8SIZE 1 /**/ |
| #define U8SIZE 1 /**/ |
| #define I16SIZE 2 /**/ |
| #define U16SIZE 2 /**/ |
| #define I32SIZE 4 /**/ |
| #define U32SIZE 4 /**/ |
| #ifdef HAS_QUAD |
| #define I64SIZE 8 /**/ |
| #define U64SIZE 8 /**/ |
| #endif |
| #define NVSIZE 8 /**/ |
| #define NV_PRESERVES_UV |
| #define NV_PRESERVES_UV_BITS undef |
| #undef NV_ZERO_IS_ALLBITS_ZERO |
| |
| /* IVdf: |
| * This symbol defines the format string used for printing a Perl IV |
| * as a signed decimal integer. |
| */ |
| /* UVuf: |
| * This symbol defines the format string used for printing a Perl UV |
| * as an unsigned decimal integer. |
| */ |
| /* UVof: |
| * This symbol defines the format string used for printing a Perl UV |
| * as an unsigned octal integer. |
| */ |
| /* UVxf: |
| * This symbol defines the format string used for printing a Perl UV |
| * as an unsigned hexadecimal integer in lowercase abcdef. |
| */ |
| /* UVXf: |
| * This symbol defines the format string used for printing a Perl UV |
| * as an unsigned hexadecimal integer in uppercase ABCDEF. |
| */ |
| /* NVef: |
| * This symbol defines the format string used for printing a Perl NV |
| * using %e-ish floating point format. |
| */ |
| /* NVff: |
| * This symbol defines the format string used for printing a Perl NV |
| * using %f-ish floating point format. |
| */ |
| /* NVgf: |
| * This symbol defines the format string used for printing a Perl NV |
| * using %g-ish floating point format. |
| */ |
| #define IVdf "ld" /**/ |
| #define UVuf "lu" /**/ |
| #define UVof "lo" /**/ |
| #define UVxf "lx" /**/ |
| #define UVXf "lX" /**/ |
| #define NVef "e" /**/ |
| #define NVff "f" /**/ |
| #define NVgf "g" /**/ |
| |
| /* Pid_t: |
| * This symbol holds the type used to declare process ids in the kernel. |
| * It can be int, uint, pid_t, etc... It may be necessary to include |
| * <sys/types.h> to get any typedef'ed information. |
| */ |
| #define Pid_t int /* PID type */ |
| |
| /* PRIVLIB: |
| * This symbol contains the name of the private library for this package. |
| * The library is private in the sense that it needn't be in anyone's |
| * execution path, but it should be accessible by the world. The program |
| * should be prepared to do ~ expansion. |
| */ |
| /* PRIVLIB_EXP: |
| * This symbol contains the ~name expanded version of PRIVLIB, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| #define PRIVLIB "sys:\\perl\\lib" /**/ |
| #define PRIVLIB_EXP (fnNwGetEnvironmentStr("PRIVLIB", PRIVLIB)) /**/ |
| |
| /* PTRSIZE: |
| * This symbol contains the size of a pointer, so that the C preprocessor |
| * can make decisions based on it. It will be sizeof(void *) if |
| * the compiler supports (void *); otherwise it will be |
| * sizeof(char *). |
| */ |
| #define PTRSIZE 4 /**/ |
| |
| /* Drand01: |
| * This macro is to be used to generate uniformly distributed |
| * random numbers over the range [0., 1.[. You may have to supply |
| * an 'extern double drand48();' in your program since SunOS 4.1.3 |
| * doesn't provide you with anything relevant in its headers. |
| * See HAS_DRAND48_PROTO. |
| */ |
| /* Rand_seed_t: |
| * This symbol defines the type of the argument of the |
| * random seed function. |
| */ |
| /* seedDrand01: |
| * This symbol defines the macro to be used in seeding the |
| * random number generator (see Drand01). |
| */ |
| /* RANDBITS: |
| * This symbol indicates how many bits are produced by the |
| * function used to generate normalized random numbers. |
| * Values include 15, 16, 31, and 48. |
| */ |
| #define Drand01() (rand()/(double)((unsigned)1<<RANDBITS)) /**/ |
| #define Rand_seed_t unsigned /**/ |
| #define seedDrand01(x) srand((Rand_seed_t)x) /**/ |
| #define RANDBITS 15 /**/ |
| |
| /* SELECT_MIN_BITS: |
| * This symbol holds the minimum number of bits operated by select. |
| * That is, if you do select(n, ...), how many bits at least will be |
| * cleared in the masks if some activity is detected. Usually this |
| * is either n or 32*ceil(n/32), especially many little-endians do |
| * the latter. This is only useful if you have select(), naturally. |
| */ |
| #define SELECT_MIN_BITS 32 /**/ |
| |
| /* Select_fd_set_t: |
| * This symbol holds the type used for the 2nd, 3rd, and 4th |
| * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET |
| * is defined, and 'int *' otherwise. This is only useful if you |
| * have select(), of course. |
| */ |
| #define Select_fd_set_t fd_set * /**/ |
| |
| /* SIG_NAME: |
| * This symbol contains a list of signal names in order of |
| * signal number. This is intended |
| * to be used as a static array initialization, like this: |
| * char *sig_name[] = { SIG_NAME }; |
| * The signals in the list are separated with commas, and each signal |
| * is surrounded by double quotes. There is no leading SIG in the signal |
| * name, i.e. SIGQUIT is known as "QUIT". |
| * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, |
| * etc., where nn is the actual signal number (e.g. NUM37). |
| * The signal number for sig_name[i] is stored in sig_num[i]. |
| * The last element is 0 to terminate the list with a NULL. This |
| * corresponds to the 0 at the end of the sig_num list. |
| */ |
| /* SIG_NUM: |
| * This symbol contains a list of signal numbers, in the same order as the |
| * SIG_NAME list. It is suitable for static array initialization, as in: |
| * int sig_num[] = { SIG_NUM }; |
| * The signals in the list are separated with commas, and the indices |
| * within that list and the SIG_NAME list match, so it's easy to compute |
| * the signal name from a number or vice versa at the price of a small |
| * dynamic linear lookup. |
| * Duplicates are allowed, but are moved to the end of the list. |
| * The signal number corresponding to sig_name[i] is sig_number[i]. |
| * if (i < NSIG) then sig_number[i] == i. |
| * The last element is 0, corresponding to the 0 at the end of |
| * the sig_name list. |
| */ |
| /* SIG_SIZE: |
| * This variable contains the number of elements of the SIG_NAME |
| * and SIG_NUM arrays, excluding the final NULL entry. |
| */ |
| #define SIG_NAME "ZERO", "NUM01", "INT", "QUIT", "ILL", "NUM05", "NUM06", "NUM07", "FPE", "KILL", "NUM10", "SEGV", "NUM12", "PIPE", "ALRM", "TERM", "NUM16", "NUM17", "NUM18", "NUM19", "CHLD", "BREAK", "ABRT", "STOP", "NUM24", "CONT", "CLD", 0 /**/ |
| #define SIG_NUM 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 20, 0 /**/ |
| #define SIG_SIZE 27 /**/ |
| |
| /* SITEARCH: |
| * This symbol contains the name of the private library for this package. |
| * The library is private in the sense that it needn't be in anyone's |
| * execution path, but it should be accessible by the world. The program |
| * should be prepared to do ~ expansion. |
| * The standard distribution will put nothing in this directory. |
| * After perl has been installed, users may install their own local |
| * architecture-dependent modules in this directory with |
| * MakeMaker Makefile.PL |
| * or equivalent. See INSTALL for details. |
| */ |
| /* SITEARCH_EXP: |
| * This symbol contains the ~name expanded version of SITEARCH, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| #define SITEARCH "c:\\perl\\site\\5.16.2\\lib\\NetWare-x86-multi-thread" /**/ |
| /*#define SITEARCH_EXP "" /**/ |
| |
| /* SITELIB: |
| * This symbol contains the name of the private library for this package. |
| * The library is private in the sense that it needn't be in anyone's |
| * execution path, but it should be accessible by the world. The program |
| * should be prepared to do ~ expansion. |
| * The standard distribution will put nothing in this directory. |
| * After perl has been installed, users may install their own local |
| * architecture-independent modules in this directory with |
| * MakeMaker Makefile.PL |
| * or equivalent. See INSTALL for details. |
| */ |
| /* SITELIB_EXP: |
| * This symbol contains the ~name expanded version of SITELIB, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| /* SITELIB_STEM: |
| * This define is SITELIB_EXP with any trailing version-specific component |
| * removed. The elements in inc_version_list (inc_version_list.U) can |
| * be tacked onto this variable to generate a list of directories to search. |
| */ |
| #define SITELIB "c:\\perl\\site\\5.16.2\\lib" /**/ |
| /*#define SITELIB_EXP "" /**/ |
| #define SITELIB_STEM "" /**/ |
| |
| /* Size_t_size: |
| * This symbol holds the size of a Size_t in bytes. |
| */ |
| #define Size_t_size 4 /**/ |
| |
| /* Size_t: |
| * This symbol holds the type used to declare length parameters |
| * for string functions. It is usually size_t, but may be |
| * unsigned long, int, etc. It may be necessary to include |
| * <sys/types.h> to get any typedef'ed information. |
| */ |
| #define Size_t size_t /* length parameter for string functions */ |
| |
| /* Sock_size_t: |
| * This symbol holds the type used for the size argument of |
| * various socket calls (just the base type, not the pointer-to). |
| */ |
| #define Sock_size_t int /**/ |
| |
| /* SSize_t: |
| * This symbol holds the type used by functions that return |
| * a count of bytes or an error condition. It must be a signed type. |
| * It is usually ssize_t, but may be long or int, etc. |
| * It may be necessary to include <sys/types.h> or <unistd.h> |
| * to get any typedef'ed information. |
| * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). |
| */ |
| #define SSize_t int /* signed count of bytes */ |
| |
| /* STARTPERL: |
| * This variable contains the string to put in front of a perl |
| * script to make sure (one hopes) that it runs with perl and not |
| * some shell. |
| */ |
| #define STARTPERL "#!perl" /**/ |
| |
| /* STDCHAR: |
| * This symbol is defined to be the type of char used in stdio.h. |
| * It has the values "unsigned char" or "char". |
| */ |
| #define STDCHAR char /**/ |
| |
| /* HAS_STDIO_STREAM_ARRAY: |
| * This symbol, if defined, tells that there is an array |
| * holding the stdio streams. |
| */ |
| /* STDIO_STREAM_ARRAY: |
| * This symbol tells the name of the array holding the stdio streams. |
| * Usual values include _iob, __iob, and __sF. |
| */ |
| /*#define HAS_STDIO_STREAM_ARRAY /**/ |
| #define STDIO_STREAM_ARRAY |
| |
| /* Uid_t_f: |
| * This symbol defines the format string used for printing a Uid_t. |
| */ |
| #define Uid_t_f "ld" /**/ |
| |
| /* Uid_t_sign: |
| * This symbol holds the signedess of a Uid_t. |
| * 1 for unsigned, -1 for signed. |
| */ |
| #define Uid_t_sign -1 /* UID sign */ |
| |
| /* Uid_t_size: |
| * This symbol holds the size of a Uid_t in bytes. |
| */ |
| #define Uid_t_size 4 /* UID size */ |
| |
| /* Uid_t: |
| * This symbol holds the type used to declare user ids in the kernel. |
| * It can be int, ushort, uid_t, etc... It may be necessary to include |
| * <sys/types.h> to get any typedef'ed information. |
| */ |
| #define Uid_t uid_t /* UID type */ |
| |
| /* USE_64_BIT_INT: |
| * This symbol, if defined, indicates that 64-bit integers should |
| * be used when available. If not defined, the native integers |
| * will be employed (be they 32 or 64 bits). The minimal possible |
| * 64-bitness is used, just enough to get 64-bit integers into Perl. |
| * This may mean using for example "long longs", while your memory |
| * may still be limited to 2 gigabytes. |
| */ |
| /* USE_64_BIT_ALL: |
| * This symbol, if defined, indicates that 64-bit integers should |
| * be used when available. If not defined, the native integers |
| * will be used (be they 32 or 64 bits). The maximal possible |
| * 64-bitness is employed: LP64 or ILP64, meaning that you will |
| * be able to use more than 2 gigabytes of memory. This mode is |
| * even more binary incompatible than USE_64_BIT_INT. You may not |
| * be able to run the resulting executable in a 32-bit CPU at all or |
| * you may need at least to reboot your OS to 64-bit mode. |
| */ |
| #ifndef USE_64_BIT_INT |
| /*#define USE_64_BIT_INT /**/ |
| #endif |
| |
| #ifndef USE_64_BIT_ALL |
| /*#define USE_64_BIT_ALL /**/ |
| #endif |
| |
| /* USE_FAST_STDIO: |
| * This symbol, if defined, indicates that Perl should |
| * be built to use 'fast stdio'. |
| * Defaults to define in Perls 5.8 and earlier, to undef later. |
| */ |
| #ifndef USE_FAST_STDIO |
| /*#define USE_FAST_STDIO / **/ |
| #endif |
| |
| /* USE_LARGE_FILES: |
| * This symbol, if defined, indicates that large file support |
| * should be used when available. |
| */ |
| #ifndef USE_LARGE_FILES |
| /*#define USE_LARGE_FILES /**/ |
| #endif |
| |
| /* USE_LONG_DOUBLE: |
| * This symbol, if defined, indicates that long doubles should |
| * be used when available. |
| */ |
| #ifndef USE_LONG_DOUBLE |
| /*#define USE_LONG_DOUBLE /**/ |
| #endif |
| |
| /* USE_MORE_BITS: |
| * This symbol, if defined, indicates that 64-bit interfaces and |
| * long doubles should be used when available. |
| */ |
| #ifndef USE_MORE_BITS |
| /*#define USE_MORE_BITS /**/ |
| #endif |
| |
| /* MULTIPLICITY: |
| * This symbol, if defined, indicates that Perl should |
| * be built to use multiplicity. |
| */ |
| #ifndef MULTIPLICITY |
| #define MULTIPLICITY /**/ |
| #endif |
| |
| /* USE_PERLIO: |
| * This symbol, if defined, indicates that the PerlIO abstraction should |
| * be used throughout. If not defined, stdio should be |
| * used in a fully backward compatible manner. |
| */ |
| #ifndef USE_PERLIO |
| /*#define USE_PERLIO /**/ |
| #endif |
| |
| /* USE_SOCKS: |
| * This symbol, if defined, indicates that Perl should |
| * be built to use socks. |
| */ |
| #ifndef USE_SOCKS |
| /*#define USE_SOCKS /**/ |
| #endif |
| |
| /* USE_ITHREADS: |
| * This symbol, if defined, indicates that Perl should be built to |
| * use the interpreter-based threading implementation. |
| */ |
| /* OLD_PTHREADS_API: |
| * This symbol, if defined, indicates that Perl should |
| * be built to use the old draft POSIX threads API. |
| */ |
| /* USE_REENTRANT_API: |
| * This symbol, if defined, indicates that Perl should |
| * try to use the various _r versions of library functions. |
| * This is extremely experimental. |
| */ |
| #define USE_ITHREADS /**/ |
| /*#define OLD_PTHREADS_API /**/ |
| /*#define USE_REENTRANT_API /**/ |
| |
| /* PERL_VENDORARCH: |
| * If defined, this symbol contains the name of a private library. |
| * The library is private in the sense that it needn't be in anyone's |
| * execution path, but it should be accessible by the world. |
| * It may have a ~ on the front. |
| * The standard distribution will put nothing in this directory. |
| * Vendors who distribute perl may wish to place their own |
| * architecture-dependent modules and extensions in this directory with |
| * MakeMaker Makefile.PL INSTALLDIRS=vendor |
| * or equivalent. See INSTALL for details. |
| */ |
| /* PERL_VENDORARCH_EXP: |
| * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| /*#define PERL_VENDORARCH "" /**/ |
| /*#define PERL_VENDORARCH_EXP "" /**/ |
| |
| /* PERL_VENDORLIB_EXP: |
| * This symbol contains the ~name expanded version of VENDORLIB, to be used |
| * in programs that are not prepared to deal with ~ expansion at run-time. |
| */ |
| /* PERL_VENDORLIB_STEM: |
| * This define is PERL_VENDORLIB_EXP with any trailing version-specific component |
| * removed. The elements in inc_version_list (inc_version_list.U) can |
| * be tacked onto this variable to generate a list of directories to search. |
| */ |
| /*#define PERL_VENDORLIB_EXP "" /**/ |
| /*#define PERL_VENDORLIB_STEM "" /**/ |
| |
| /* VOIDFLAGS: |
| * This symbol indicates how much support of the void type is given by this |
| * compiler. What various bits mean: |
| * |
| * 1 = supports declaration of void |
| * 2 = supports arrays of pointers to functions returning void |
| * 4 = supports comparisons between pointers to void functions and |
| * addresses of void functions |
| * 8 = supports declaration of generic void pointers |
| * |
| * The package designer should define VOIDUSED to indicate the requirements |
| * of the package. This can be done either by #defining VOIDUSED before |
| * including config.h, or by defining defvoidused in Myinit.U. If the |
| * latter approach is taken, only those flags will be tested. If the |
| * level of void support necessary is not present, defines void to int. |
| */ |
| #ifndef VOIDUSED |
| #define VOIDUSED 15 |
| #endif |
| #define VOIDFLAGS 15 |
| #if (VOIDFLAGS & VOIDUSED) != VOIDUSED |
| #define void int /* is void to be avoided? */ |
| #define M_VOID /* Xenix strikes again */ |
| #endif |
| |
| /* SETUID_SCRIPTS_ARE_SECURE_NOW: |
| * This symbol, if defined, indicates that the bug that prevents |
| * setuid scripts from being secure is not present in this kernel. |
| */ |
| /* DOSUID: |
| * This symbol, if defined, indicates that the C program should |
| * check the script that it is executing for setuid/setgid bits, and |
| * attempt to emulate setuid/setgid on systems that have disabled |
| * setuid #! scripts because the kernel can't do it securely. |
| * It is up to the package designer to make sure that this emulation |
| * is done securely. Among other things, it should do an fstat on |
| * the script it just opened to make sure it really is a setuid/setgid |
| * script, it should make sure the arguments passed correspond exactly |
| * to the argument on the #! line, and it should not trust any |
| * subprocesses to which it must pass the filename rather than the |
| * file descriptor of the script to be executed. |
| */ |
| /*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/ |
| /*#define DOSUID /**/ |
| |
| /* I_STDARG: |
| * This symbol, if defined, indicates that <stdarg.h> exists and should |
| * be included. |
| */ |
| /* I_VARARGS: |
| * This symbol, if defined, indicates to the C program that it should |
| * include <varargs.h>. |
| */ |
| #define I_STDARG /**/ |
| /*#define I_VARARGS /**/ |
| |
| /* USE_CROSS_COMPILE: |
| * This symbol, if defined, indicates that Perl is being cross-compiled. |
| */ |
| /* PERL_TARGETARCH: |
| * This symbol, if defined, indicates the target architecture |
| * Perl has been cross-compiled to. Undefined if not a cross-compile. |
| */ |
| #ifndef USE_CROSS_COMPILE |
| /*#define USE_CROSS_COMPILE /**/ |
| #define PERL_TARGETARCH "undef" /**/ |
| #endif |
| |
| /* HAS_COPYSIGNL: |
| * This symbol, if defined, indicates that the copysignl routine is |
| * available. If aintl is also present we can emulate modfl. |
| */ |
| /*#define HAS_COPYSIGNL /**/ |
| |
| /* HAS_DBMINIT_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the dbminit() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern int dbminit(char *); |
| */ |
| /*#define HAS_DBMINIT_PROTO /**/ |
| |
| /* HAS_FLOCK_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the flock() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern int flock(int, int); |
| */ |
| /*#define HAS_FLOCK_PROTO /**/ |
| |
| /* HAS_REALPATH: |
| * This symbol, if defined, indicates that the realpath routine is |
| * available to do resolve paths. |
| */ |
| /*#define HAS_REALPATH /**/ |
| |
| /* HAS_SIGPROCMASK: |
| * This symbol, if defined, indicates that the sigprocmask |
| * system call is available to examine or change the signal mask |
| * of the calling process. |
| */ |
| /*#define HAS_SIGPROCMASK /**/ |
| |
| /* HAS_SOCKATMARK: |
| * This symbol, if defined, indicates that the sockatmark routine is |
| * available to test whether a socket is at the out-of-band mark. |
| */ |
| /*#define HAS_SOCKATMARK /**/ |
| |
| /* HAS_SOCKATMARK_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the sockatmark() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern int sockatmark(int); |
| */ |
| /*#define HAS_SOCKATMARK_PROTO /**/ |
| |
| /* HAS_SETRESGID_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the setresgid() function. Otherwise, it is up |
| * to the program to supply one. Good guesses are |
| * extern int setresgid(uid_t ruid, uid_t euid, uid_t suid); |
| */ |
| /*#define HAS_SETRESGID_PROTO /**/ |
| |
| /* HAS_SETRESUID_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the setresuid() function. Otherwise, it is up |
| * to the program to supply one. Good guesses are |
| * extern int setresuid(uid_t ruid, uid_t euid, uid_t suid); |
| */ |
| /*#define HAS_SETRESUID_PROTO /**/ |
| |
| /* HAS_STRFTIME: |
| * This symbol, if defined, indicates that the strftime routine is |
| * available to do time formatting. |
| */ |
| #define HAS_STRFTIME /**/ |
| |
| /* HAS_STRLCAT |
| * This symbol, if defined, indicates that the strlcat routine is |
| * available to do string concatenation. |
| */ |
| /*#define HAS_STRLCAT /**/ |
| |
| /* HAS_STRLCPY: |
| * This symbol, if defined, indicates that the strlcpy routine is |
| * available to do string copying. |
| */ |
| /*#define HAS_STRLCPY /**/ |
| |
| /* HAS_SYSCALL_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the syscall() function. Otherwise, it is up |
| * to the program to supply one. Good guesses are |
| * extern int syscall(int, ...); |
| * extern int syscall(long, ...); |
| */ |
| /*#define HAS_SYSCALL_PROTO /**/ |
| |
| /* U32_ALIGNMENT_REQUIRED: |
| * This symbol, if defined, indicates that you must access |
| * character data through U32-aligned pointers. |
| */ |
| /*#define U32_ALIGNMENT_REQUIRED /**/ |
| |
| /* HAS_USLEEP_PROTO: |
| * This symbol, if defined, indicates that the system provides |
| * a prototype for the usleep() function. Otherwise, it is up |
| * to the program to supply one. A good guess is |
| * extern int usleep(useconds_t); |
| */ |
| /*#define HAS_USLEEP_PROTO /**/ |
| |
| /* HAS_PTHREAD_ATFORK: |
| * This symbol, if defined, indicates that the pthread_atfork routine |
| * is available to setup fork handlers. |
| */ |
| /*#define HAS_PTHREAD_ATFORK /**/ |
| |
| #endif |
