| case $PERL_CONFIG_SH in |
| '') |
| if test -f config.sh |
| then TOP=. |
| else |
| echo "Can't find config.sh."; exit 1 |
| fi |
| . $TOP/config.sh |
| ;; |
| esac |
| |
| case $CROSS_NAME in |
| '') |
| Makefile=Makefile |
| ;; |
| *) |
| # if cross-compilation, the Makefile named accordingly |
| Makefile=Makefile-cross-$CROSS_NAME |
| . Cross/config-${CROSS_NAME}.sh |
| ;; |
| esac |
| |
| : This forces SH files to create target in same directory as SH file. |
| : This is so that make depend always knows where to find SH derivatives. |
| case "$0" in |
| */*) cd `expr X$0 : 'X\(.*\)/'` ;; |
| esac |
| |
| linklibperl='$(LIBPERL)' |
| linklibperl_nonshr='' |
| shrpldflags='$(LDDLFLAGS)' |
| ldlibpth='' |
| DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB' |
| DPERL_IS_MINIPERL='-DPERL_IS_MINIPERL' |
| case "$useshrplib" in |
| true) |
| # Prefix all runs of 'miniperl' and 'perl' with |
| # $ldlibpth so that ./perl finds *this* shared libperl. |
| case "$LD_LIBRARY_PATH" in |
| '') |
| ldlibpth="LD_LIBRARY_PATH=`pwd`";; |
| *) |
| ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";; |
| esac |
| |
| pldlflags="$cccdlflags" |
| static_ldflags='' |
| case "${osname}${osvers}" in |
| next4*) |
| ld=libtool |
| lddlflags="-dynamic -undefined warning -framework System \ |
| -compatibility_version 1 -current_version $patchlevel \ |
| -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" |
| ;; |
| rhapsody*|darwin*) |
| shrpldflags="${ldflags} -dynamiclib \ |
| -compatibility_version \ |
| ${api_revision}.${api_version}.${api_subversion} \ |
| -current_version \ |
| ${revision}.${patchlevel}.${subversion} \ |
| -install_name \$(shrpdir)/\$@" |
| ;; |
| cygwin*) |
| shrpldflags="$shrpldflags -Wl,--out-implib=libperl.dll.a -Wl,--image-base,0x52000000" |
| linklibperl="-L. -lperl" |
| ;; |
| sunos*) |
| linklibperl="-lperl" |
| ;; |
| netbsd*|freebsd[234]*|openbsd*|dragonfly*) |
| linklibperl="-L. -lperl" |
| ;; |
| interix*) |
| linklibperl="-L. -lperl" |
| shrpldflags="$shrpldflags -Wl,--image-base,0x57000000" |
| ;; |
| aix*) |
| case "$cc" in |
| gcc*) |
| shrpldflags="-shared -Wl,-H512 -Wl,-T512 -Wl,-bhalt:4 -Wl,-bM:SRE -Wl,-bE:perl.exp" |
| case "$osvers" in |
| 3*) shrpldflags="$shrpldflags -e _nostart" |
| ;; |
| *) shrpldflags="$shrpldflags -Wl,-bnoentry" |
| ;; |
| esac |
| shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" |
| linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" |
| linklibperl_nonshr='-lperl_nonshr' |
| ;; |
| *) |
| shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" |
| case "$osvers" in |
| 3*) shrpldflags="$shrpldflags -e _nostart" |
| ;; |
| *) shrpldflags="$shrpldflags -b noentry" |
| ;; |
| esac |
| shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" |
| linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" |
| linklibperl_nonshr='-lperl_nonshr' |
| ;; |
| esac |
| ;; |
| hpux*) |
| linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl" |
| ;; |
| os390*) |
| shrpldflags='-W l,XPLINK,dll' |
| linklibperl='libperl.x' |
| DPERL_EXTERNAL_GLOB='' |
| ;; |
| esac |
| case "$ldlibpthname" in |
| '') ;; |
| *) |
| case "$osname" in |
| os2) |
| ldlibpth='' |
| ;; |
| *) |
| eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\"" |
| ;; |
| esac |
| # Strip off any trailing :'s |
| ldlibpth=`echo $ldlibpth | sed 's/:*$//'` |
| ;; |
| esac |
| |
| case "$ldlibpth" in |
| # Protect any spaces |
| *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; |
| esac |
| |
| case "$osname" in |
| linux) |
| # If there is a pre-existing $libperl from a previous |
| # installation, Linux needs to use LD_PRELOAD to |
| # override the LD_LIBRARY_PATH setting. See the |
| # INSTALL file, under "Building a shared perl library". |
| # If there is no pre-existing $libperl, we don't need |
| # to do anything further. |
| if test -f $archlib/CORE/$libperl; then |
| rm -f preload |
| cat <<'EOT' > preload |
| #! /bin/sh |
| lib=$1 |
| shift |
| test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD" |
| exec "$@" |
| EOT |
| chmod 755 preload |
| ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl" |
| fi |
| ;; |
| os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" |
| ;; |
| esac |
| |
| ;; |
| |
| *) pldlflags='' |
| static_ldflags='CCCDLFLAGS=' |
| ;; |
| esac |
| |
| : is Cwd static or dynamic |
| static_cwd='define' |
| list_util_dep='$(PERL_EXE)' |
| for f in $dynamic_ext; do |
| case $f in |
| Cwd) static_cwd='undef' ;; |
| List/Util) list_util_dep=lib/auto/List/Util/Util.$dlext |
| esac |
| done |
| |
| : Prepare dependency lists for Makefile. |
| dynamic_list=' ' |
| dynamic_ext_re="lib/auto/re/re.$dlext" |
| extra_dep=' |
| ext/Pod-Functions/pm_to_blib: cpan/Pod-Simple/pm_to_blib pod/perlfunc.pod |
| ' |
| for f in $dynamic_ext; do |
| : the dependency named here will never exist |
| base=`echo "$f" | sed 's/.*\///'` |
| this_target="lib/auto/$f/$base.$dlext" |
| dynamic_list="$dynamic_list $this_target" |
| |
| : Parallel makes reveal that we have some interdependencies |
| case $f in |
| Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep |
| $this_target: $list_util_dep" ;; |
| Unicode/Normalize) extra_dep="$extra_dep |
| $this_target: uni.data" ;; |
| esac |
| done |
| |
| static_list=' ' |
| for f in $static_ext; do |
| base=`echo "$f" | sed 's/.*\///'` |
| static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" |
| : Parallel makes reveal that we have some interdependencies |
| this_target="lib/auto/$f/$base\$(LIB_EXT)" |
| case $f in |
| Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep |
| $this_target: lib/auto/List/Util/Util\$(LIB_EXT)" ;; |
| Unicode/Normalize) extra_dep="$extra_dep |
| $this_target: uni.data" ;; |
| esac |
| done |
| |
| nonxs_list=' ' |
| for f in $nonxs_ext; do |
| p=`echo "$f" | tr / -` |
| for d in ext dist cpan; do |
| if test -d $d/$p; then |
| nonxs_list="$nonxs_list $d/$p/pm_to_blib" |
| fi |
| done |
| done |
| |
| dtrace_h='' |
| dtrace_o='' |
| minidtrace_o='' |
| case "$usedtrace" in |
| define|true) |
| dtrace_h='perldtrace.h' |
| $dtrace -G -s perldtrace.d -o perldtrace.tmp >/dev/null 2>&1 \ |
| && rm -f perldtrace.tmp && dtrace_o='perldtrace$(OBJ_EXT)' \ |
| && minidtrace_o='miniperldtrace$(OBJ_EXT)' |
| ;; |
| esac |
| |
| echo "Extracting $Makefile (with variable substitutions)" |
| $spitshell >$Makefile <<!GROK!THIS! |
| # $Makefile |
| # This file is derived from Makefile.SH. Any changes made here will |
| # be lost the next time you run Configure. |
| # Makefile is used to generate $firstmakefile. The only difference |
| # is that $firstmakefile has the dependencies filled in at the end. |
| |
| CC = $cc |
| LD = $ld |
| |
| LDFLAGS = $ldflags |
| CLDFLAGS = $ldflags |
| |
| mallocsrc = $mallocsrc |
| mallocobj = $mallocobj |
| madlysrc = $madlysrc |
| madlyobj = $madlyobj |
| LNS = $lns |
| # NOTE: some systems don't grok "cp -f". XXX Configure test needed? |
| CPS = $cp |
| RMS = rm -f |
| ranlib = $ranlib |
| |
| # The following are mentioned only to make metaconfig include the |
| # appropriate questions in Configure. If you want to change these, |
| # edit config.sh instead, or specify --man1dir=/wherever on |
| # installman commandline. |
| bin = $installbin |
| scriptdir = $scriptdir |
| shrpdir = $archlibexp/CORE |
| privlib = $installprivlib |
| man1dir = $man1dir |
| man1ext = $man1ext |
| man3dir = $man3dir |
| man3ext = $man3ext |
| |
| # The following are used to build and install shared libraries for |
| # dynamic loading. |
| LDDLFLAGS = $lddlflags |
| SHRPLDFLAGS = $shrpldflags |
| CCDLFLAGS = $ccdlflags |
| DLSUFFIX = .$dlext |
| PLDLFLAGS = $pldlflags |
| LIBPERL = $libperl |
| LLIBPERL= $linklibperl |
| LLIBPERL_NONSHR= $linklibperl_nonshr |
| SHRPENV = $shrpenv |
| |
| # Static targets are ordinarily built without CCCDLFLAGS. However, |
| # if building a shared libperl.so that might later be linked into |
| # another application, then it might be appropriate to also build static |
| # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC |
| # for GNU cc). |
| STATIC_LDFLAGS = $static_ldflags |
| |
| # The following is used to include the current directory in |
| # the dynamic loader path you are building a shared libperl. |
| LDLIBPTH = $ldlibpth |
| |
| # Sometimes running an executable is an adventure. |
| RUN = $run |
| |
| # These variables may need to be manually set for non-Unix systems. |
| AR = $full_ar |
| HOST_EXE_EXT = |
| EXE_EXT = $_exe |
| LIB_EXT = $_a |
| OBJ_EXT = $_o |
| PATH_SEP = $p_ |
| |
| # Macros to invoke a copy of miniperl during the build. Targets which |
| # are built using these macros should depend on \$(MINIPERL_EXE) |
| MINIPERL_EXE = miniperl\$(EXE_EXT) |
| MINIPERL = \$(LDLIBPTH) \$(RUN) ./miniperl\$(EXE_EXT) -Ilib |
| |
| # Macros to invoke a copy of our fully operational perl during the build. |
| PERL_EXE = perl\$(EXE_EXT) |
| RUN_PERL = \$(LDLIBPTH) \$(RUN) ./perl\$(EXE_EXT) |
| |
| # Macros to run our tests |
| RUN_TESTS = \$(LDLIBPTH) ./runtests |
| |
| dynamic_ext = $dynamic_list |
| dynamic_ext_re = $dynamic_ext_re |
| static_ext = $static_list |
| nonxs_ext = $nonxs_list |
| ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext) |
| DYNALOADER = DynaLoader\$(OBJ_EXT) |
| |
| libs = $perllibs $cryptlib |
| |
| public = \$(PERL_EXE) utilities translators |
| |
| shellflags = $shellflags |
| |
| # This is set to MAKE=$make if your $make command doesn't |
| # do it for you. |
| $make_set_make |
| |
| # Mention $gmake here so it gets probed for by Configure. |
| |
| !GROK!THIS! |
| |
| case "${osname}" in |
| linux*|darwin) |
| $spitshell >>$Makefile <<!GROK!THIS! |
| # If you're going to use valgrind and it can't be invoked as plain valgrind |
| # then you'll need to change this, or override it on the make command line. |
| VALGRIND ?= valgrind |
| VG_TEST ?= ./perl -e 1 2>/dev/null |
| |
| !GROK!THIS! |
| ;; |
| esac |
| |
| $spitshell >>$Makefile <<!GROK!THIS! |
| DTRACE = $dtrace |
| DTRACE_H = $dtrace_h |
| DTRACE_O = $dtrace_o |
| MINIDTRACE_O = $minidtrace_o |
| |
| FIRSTMAKEFILE = $firstmakefile |
| |
| # Any special object files needed by this architecture, e.g. os2/os2.obj |
| ARCHOBJS = $archobjs |
| |
| .SUFFIXES: .c \$(OBJ_EXT) .i .s |
| |
| # grrr |
| SHELL = $sh |
| |
| # how to tr(anslate) newlines |
| TRNL = '$trnl' |
| |
| OPTIMIZE = $optimize |
| |
| EXTRAS = $extras |
| |
| INSTALLPREFIXEXP = $prefix |
| |
| !GROK!THIS! |
| # not used by Makefile but by installperl; |
| # mentioned here so that metaconfig picks these up |
| # $installusrbinperl |
| # $versiononly |
| |
| case "${osname}:${osvers}" in |
| darwin:*) |
| $spitshell >>$Makefile <<EOF |
| |
| # Your locales are broken (osname $osname, osvers $osvers) |
| # and to avoid the numerous |
| # perl: warning: Setting locale failed. |
| # warnings during the build process we reset the locale variables. |
| |
| LC_ALL=C |
| LANG=C |
| LANGUAGE=C |
| EOF |
| ;; |
| esac |
| |
| case $CROSS_NAME in |
| '') |
| ## In the following dollars and backticks do not need the extra backslash. |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@` |
| |
| CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<` |
| |
| CONFIGPM_FROM_CONFIG_SH = lib/Config.pm lib/Config_heavy.pl |
| CONFIGPM = $(CONFIGPM_FROM_CONFIG_SH) lib/Config_git.pl |
| |
| CONFIGPOD = lib/Config.pod |
| |
| CONFIGH = config.h |
| !NO!SUBS! |
| ;; |
| *) |
| # if cross-compilation |
| $spitshell >>$Makefile <<!GROK!THIS! |
| CROSS_NAME = $CROSS_NAME |
| CROSS_LIB = xlib/$CROSS_NAME |
| |
| CCCMD = \`sh \$(shellflags) cflags-cross-$CROSS_NAME "optimize='\$(OPTIMIZE)'" \$@\` -I\$(CROSS_LIB) |
| CCCMDSRC = \`sh \$(shellflags) cflags-cross-$CROSS_NAME "optimize='\$(OPTIMIZE)'" \$<\` -I\$(CROSS_LIB) |
| CONFIGPM = xlib/\$(CROSS_NAME)/Config.pm |
| CONFIGPOD = xlib/\$(CROSS_NAME)/Config.pod |
| CONFIGH = xconfig.h |
| |
| xconfig.h: config_h.SH Cross/config-\$(CROSS_NAME).sh |
| CONFIG_SH=Cross/config-\$(CROSS_NAME).sh CONFIG_H=xconfig.h \$(SHELL) config_h.SH |
| #TODO \$(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib -MCross=\$(CROSS_NAME) config_h.PL "INST_VER=\$(INST_VER)" "CORE_DIR=\$(CROSS_LIB)" "CONFIG_H=xconfig.h" |
| cp xconfig.h \$(CROSS_LIB)/ |
| cp xconfig.h \$(CROSS_LIB)/config.h |
| |
| !GROK!THIS! |
| ;; |
| esac |
| |
| ## In the following dollars and backticks do not need the extra backslash. |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h lib/buildcustomize.pl |
| |
| # Files to be built with variable substitution before miniperl |
| # is available. |
| sh = Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH pod/Makefile.SH |
| |
| shextract = Makefile cflags config.h makedepend makedir myconfig pod/Makefile |
| |
| addedbyconf = UU $(shextract) pstruct |
| |
| # Unicode data files generated by mktables |
| unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \ |
| lib/unicore/CombiningClass.pl lib/unicore/Name.pl \ |
| lib/unicore/UCD.pl lib/unicore/Name.pm \ |
| lib/unicore/Heavy.pl lib/unicore/mktables.lst |
| |
| # Directories of Unicode data files generated by mktables |
| unidatadirs = lib/unicore/To lib/unicore/lib |
| |
| h1 = EXTERN.h INTERN.h XSUB.h av.h $(CONFIGH) cop.h cv.h dosish.h |
| h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h |
| h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h |
| h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h |
| h5 = utf8.h warnings.h mydtrace.h op_reg_common.h l1_char_class_tab.h |
| h6 = charclass_invlists.h |
| h = $(h1) $(h2) $(h3) $(h4) $(h5) $(h6) |
| |
| c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c |
| c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c |
| c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c |
| c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c |
| c5 = $(madlysrc) $(mallocsrc) |
| |
| c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c opmini.c perlmini.c |
| |
| obj0 = op$(OBJ_EXT) perl$(OBJ_EXT) |
| obj0mini = perlmini$(OBJ_EXT) opmini$(OBJ_EXT) miniperlmain$(OBJ_EXT) |
| obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) keywords$(OBJ_EXT) |
| obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) |
| obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) |
| |
| minindt_obj = $(obj0mini) $(obj1) $(obj2) $(obj3) $(ARCHOBJS) |
| mini_obj = $(minindt_obj) $(MINIDTRACE_O) |
| ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS) |
| obj = $(ndt_obj) $(DTRACE_O) |
| |
| perltoc_pod_prereqs = extra.pods pod/perl5162delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod |
| generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs) |
| generated_headers = uudmap.h bitcount.h mg_data.h |
| |
| Icwd = -Idist/Cwd -Idist/Cwd/lib -Idist/Carp/lib |
| |
| lintflags = \ |
| -b \ |
| -n \ |
| -p \ |
| -Ncheck=%all \ |
| -Nlevel=4 \ |
| -errchk=parentheses \ |
| -errhdr=%all \ |
| -errfmt=src \ |
| -errtags \ |
| -erroff=E_ASSIGN_NARROW_CONV \ |
| -erroff=E_BAD_PTR_CAST \ |
| -erroff=E_BAD_PTR_CAST_ALIGN \ |
| -erroff=E_BAD_PTR_INT_COMBINATION \ |
| -erroff=E_BAD_SIGN_EXTEND \ |
| -erroff=E_BLOCK_DECL_UNUSED \ |
| -erroff=E_CASE_FALLTHRU \ |
| -erroff=E_CONST_EXPR \ |
| -erroff=E_CONSTANT_CONDITION \ |
| -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \ |
| -erroff=E_EQUALITY_NOT_ASSIGNMENT \ |
| -erroff=E_EXPR_NULL_EFFECT \ |
| -erroff=E_FALSE_LOGICAL_EXPR \ |
| -erroff=E_INCL_NUSD \ |
| -erroff=E_LOOP_EMPTY \ |
| -erroff=E_MAIN_PARAM \ |
| -erroff=E_POINTER_TO_OBJECT \ |
| -erroff=E_PTRDIFF_OVERFLOW \ |
| -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \ |
| -erroff=E_STATIC_UNUSED \ |
| -erroff=E_TRUE_LOGICAL_EXPR |
| |
| splintflags = \ |
| -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \ |
| -D__builtin_va_list=va_list \ |
| -Dsigjmp_buf=jmp_buf \ |
| -warnposix \ |
| \ |
| +boolint \ |
| +charintliteral \ |
| -fixedformalarray \ |
| -mustfreefresh \ |
| -nestedextern \ |
| -predboolint \ |
| -predboolothers \ |
| -preproc \ |
| -boolops \ |
| -shadow \ |
| -nullstate \ |
| +longintegral \ |
| +matchanyintegral \ |
| -type \ |
| \ |
| +line-len 999 \ |
| +weak |
| |
| splintfiles = $(c1) |
| |
| .c$(OBJ_EXT): |
| $(CCCMD) $(PLDLFLAGS) $*.c |
| |
| .c.i: |
| $(CCCMDSRC) -E $*.c > $*.i |
| |
| .c.s: |
| $(CCCMDSRC) -S $*.c |
| |
| all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make |
| @echo " "; |
| @echo " Everything is up to date. Type '$(MAKE) test' to run test suite." |
| |
| .PHONY: all translators utilities |
| |
| # Both git_version.h and lib/Config_git.pl are built |
| # by make_patchnum.pl. |
| git_version.h: lib/Config_git.pl |
| |
| lib/Config_git.pl: $(MINIPERL_EXE) make_patchnum.pl |
| $(MINIPERL) make_patchnum.pl |
| |
| # make sure that we recompile perl.c if the git version changes |
| perl$(OBJ_EXT): git_version.h |
| |
| !NO!SUBS! |
| |
| # Making utilities and translators require Cwd. If we have dynamic |
| # loading, we only need miniperl and Cwd.$dlext. If we have static |
| # loading, we need to build perl first. |
| case "$usedl$static_cwd" in |
| defineundef) |
| util_deps='$(MINIPERL_EXE) $(CONFIGPM) lib/auto/Cwd/Cwd$(DLSUFFIX) FORCE' |
| x2p_deps='$(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE' |
| ;; |
| definedefine) |
| util_deps='$(PERL_EXE) $(CONFIGPM) FORCE' |
| x2p_deps='$(PERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE' |
| ;; |
| *) util_deps='$(PERL_EXE) $(CONFIGPM) FORCE' |
| x2p_deps='$(PERL_EXE) $(CONFIGPM) FORCE' |
| ;; |
| esac |
| |
| $spitshell >>$Makefile <<!GROK!THIS! |
| translators: $x2p_deps |
| @echo " "; echo " Making x2p stuff"; cd x2p; \$(LDLIBPTH) \$(MAKE) all |
| |
| x2p/s2p: $x2p_deps |
| cd x2p; \$(LDLIBPTH) \$(MAKE) s2p |
| |
| x2p/find2perl: $x2p_deps |
| cd x2p; \$(LDLIBPTH) \$(MAKE) find2perl |
| |
| utilities: $util_deps |
| @echo " "; echo " Making utilities"; cd utils; \$(LDLIBPTH) \$(MAKE) all |
| |
| !GROK!THIS! |
| |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| # This is now done by installman only if you actually want the man pages. |
| # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; |
| |
| # Phony target to force checking subdirectories. |
| # Apparently some makes require an action for the FORCE target. |
| .PHONY: FORCE |
| FORCE: |
| @sh -c true |
| !NO!SUBS! |
| |
| for file in op perl; do |
| if $issymlink $file.c; then |
| $spitshell >>$Makefile <<!GROK!THIS! |
| |
| # We do a copy of the $file.c instead of a symlink because gcc gets huffy |
| # if we have a symlink forest to another disk (it complains about too many |
| # levels of symbolic links, even if we have only two) |
| |
| ${file}mini.c: $file.c |
| \$(RMS) ${file}mini.c |
| \$(CPS) ${file}.c ${file}mini.c |
| !GROK!THIS! |
| else |
| $spitshell >>$Makefile <<!GROK!THIS! |
| |
| ${file}mini.c: $file.c |
| \$(RMS) ${file}mini.c |
| \$(LNS) ${file}.c ${file}mini.c |
| !GROK!THIS! |
| fi |
| |
| $spitshell >>$Makefile <<!GROK!THIS! |
| |
| ${file}mini\$(OBJ_EXT): ${file}mini.c |
| \$(CCCMD) \$(PLDLFLAGS) $DPERL_IS_MINIPERL $DPERL_EXTERNAL_GLOB ${file}mini.c |
| !GROK!THIS! |
| done |
| |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| globals$(OBJ_EXT): $(generated_headers) |
| |
| uudmap.h mg_data.h: bitcount.h |
| |
| bitcount.h: generate_uudmap$(HOST_EXE_EXT) |
| $(RUN) ./generate_uudmap$(HOST_EXE_EXT) $(generated_headers) |
| |
| generate_uudmap$(OBJ_EXT): mg_raw.h |
| |
| generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT) |
| $(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs) |
| |
| miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h |
| $(CCCMD) $(PLDLFLAGS) $*.c |
| |
| perlmain.c: $(MINIPERL_EXE) lib/ExtUtils/Miniperl.pm |
| $(MINIPERL) -Ilib -MExtUtils::Miniperl -e 'writemain(@ARGV)' DynaLoader $(static_ext) > perlmain.c |
| |
| perlmain$(OBJ_EXT): perlmain.c |
| $(CCCMD) $(PLDLFLAGS) $*.c |
| |
| # The file ext.libs is a list of libraries that must be linked in |
| # for static extensions, e.g. -lm -lgdbm, etc. The individual |
| # static extension Makefile's add to it. |
| ext.libs: $(static_ext) |
| -@test -f ext.libs || touch ext.libs |
| |
| !NO!SUBS! |
| |
| # How to build libperl. This is still rather convoluted. |
| # Load up custom Makefile.SH fragment for shared loading and executables: |
| case "$osname" in |
| *) |
| Makefile_s="$osname/Makefile.SHs" |
| ;; |
| esac |
| |
| case "$osname" in |
| aix) |
| $spitshell >>$Makefile <<!GROK!THIS! |
| LIBS = $perllibs |
| # In AIX we need to change this for building Perl itself from |
| # its earlier definition (which is for building external |
| # extensions *after* Perl has been built and installed) |
| CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'` |
| |
| !GROK!THIS! |
| case "$useshrplib" in |
| define|true|[yY]*) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT) |
| MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT) |
| |
| $(LIBPERL_NONSHR): $(obj) |
| $(RMS) $(LIBPERL_NONSHR) |
| $(AR) rcu $(LIBPERL_NONSHR) $(obj) |
| |
| $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) |
| $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \ |
| opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS) |
| |
| MINIPERLEXP = $(MINIPERL_NONSHR) |
| |
| LIBPERLEXPORT = perl.exp |
| |
| !NO!SUBS! |
| |
| ;; |
| *) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| MINIPERLEXP = $(MINIPERL_EXE) |
| |
| PERLEXPORT = perl.exp |
| |
| !NO!SUBS! |
| ;; |
| esac |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| perl.exp: $(MINIPERLEXP) makedef.pl $(CONFIGPM) $(SYM) $(SYMH) |
| ./$(MINIPERLEXP) makedef.pl --sort-fold PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" > perl.exp |
| |
| !NO!SUBS! |
| ;; |
| os2) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| MINIPERLEXP = miniperl |
| |
| perl5.def: $(MINIPERLEXP) makedef.pl $(CONFIGPM) $(SYM) $(SYMH) miniperl.map |
| ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def |
| |
| !NO!SUBS! |
| ;; |
| cygwin) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| cygwin.c: cygwin/cygwin.c |
| $(LNS) cygwin/cygwin.c |
| |
| LIBPERL_NONSHR = libperl$(LIB_EXT) |
| |
| $(LIBPERL_NONSHR): $(obj) |
| $(RMS) $(LIBPERL_NONSHR) |
| $(AR) rcu $(LIBPERL_NONSHR) $(obj) |
| |
| !NO!SUBS! |
| ;; |
| esac |
| |
| if test -s $Makefile_s ; then |
| . $Makefile_s |
| $spitshell >>$Makefile <<!GROK!THIS! |
| |
| Makefile: $Makefile_s |
| !GROK!THIS! |
| else |
| case "$dtrace_h" in |
| ?*) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| # dtrace dicards const qualifiers from arguments, put them back |
| $(DTRACE_H): perldtrace.d |
| $(DTRACE) -h -s perldtrace.d -o $(DTRACE_H).in |
| sed -e '/const/!s/char \*/const char */g' $(DTRACE_H).in >$(DTRACE_H) |
| $(RMS) $(DTRACE_H).in |
| |
| mydtrace.h: $(DTRACE_H) |
| |
| !NO!SUBS! |
| ;; |
| esac |
| case "$dtrace_o" in |
| ?*) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| $(DTRACE_O): perldtrace.d $(ndt_obj) |
| $(DTRACE) -G -s perldtrace.d -o $(DTRACE_O) $(ndt_obj) |
| |
| $(MINIDTRACE_O): perldtrace.d $(minindt_obj) perlmini$(OBJ_EXT) |
| $(DTRACE) -G -s perldtrace.d -o $(MINIDTRACE_O) $(minindt_obj) perlmini$(OBJ_EXT) |
| |
| !NO!SUBS! |
| ;; |
| esac |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT) |
| !NO!SUBS! |
| case "$useshrplib" in |
| true) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| rm -f $@ |
| $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs) |
| !NO!SUBS! |
| case "$osname" in |
| aix) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| rm -f libperl$(OBJ_EXT) |
| mv $@ libperl$(OBJ_EXT) |
| $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) |
| !NO!SUBS! |
| ;; |
| esac |
| ;; |
| *) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| rm -f $(LIBPERL) |
| $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER) |
| @$(ranlib) $(LIBPERL) |
| !NO!SUBS! |
| ;; |
| esac |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| # How to build executables. |
| |
| # The $& notation tells Sequent machines that it can do a parallel make, |
| # and is harmless otherwise. |
| # The miniperl -w -MExporter line is a basic cheap test to catch errors |
| # before make goes on to run preplibrary and then MakeMaker on extensions. |
| # This is very handy because later errors are often caused by miniperl |
| # build problems but that's not obvious to the novice. |
| # The Module used here must not depend on Config or any extensions. |
| |
| !NO!SUBS! |
| |
| case "${osname}${osvers}" in |
| aix*|beos*) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| $(MINIPERL_EXE): $& $(mini_obj) |
| $(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) $(mini_obj) $(libs) |
| $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
| !NO!SUBS! |
| ;; |
| next4*) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| $(MINIPERL_EXE): $& $(mini_obj) |
| $(CC) -o $(MINIPERL_EXE) $(mini_obj) $(libs) |
| $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
| !NO!SUBS! |
| ;; |
| darwin*) |
| case "$osvers" in |
| [1-6].*) ;; |
| *) case "$ldflags" in |
| *"-flat_namespace"*) ;; |
| *) # to allow opmini.o to override stuff in libperl.dylib |
| $spitshell >>$Makefile <<!NO!SUBS! |
| NAMESPACEFLAGS = -force_flat_namespace |
| !NO!SUBS! |
| ;; |
| esac |
| ;; |
| esac |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| $(MINIPERL_EXE): $& $(mini_obj) |
| -@rm -f miniperl.xok |
| $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o $(MINIPERL_EXE) \ |
| $(mini_obj) $(libs) |
| $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
| !NO!SUBS! |
| ;; |
| *) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| $(MINIPERL_EXE): $& $(mini_obj) |
| -@rm -f miniperl.xok |
| $(LDLIBPTH) $(CC) $(CLDFLAGS) -o $(MINIPERL_EXE) \ |
| $(mini_obj) $(libs) |
| $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest |
| !NO!SUBS! |
| ;; |
| esac |
| |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| $(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
| -@rm -f miniperl.xok |
| $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
| |
| # Purify/Quantify Perls. |
| |
| pure$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
| $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
| |
| purecov$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
| $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
| |
| quant$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) |
| $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) |
| |
| !NO!SUBS! |
| |
| case "${osname}${osvers}" in |
| linux*|darwin*) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| # Valgrind perl (currently Linux, Darwin only) |
| |
| perl.valgrind.config: config.sh |
| @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..." |
| @$(MAKE) perl.config.dashg |
| @echo "Checking usemymalloc='n' in config.sh..." |
| @grep "^usemymalloc=" config.sh |
| @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 |
| @echo "And of course you have to have valgrind..." |
| $(VALGRIND) $(VG_TEST) || exit 1 |
| !NO!SUBS! |
| ;; |
| esac |
| |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| # Third Degree Perl (Tru64 only) |
| |
| perl.config.dashg: |
| @echo "Checking optimize='-g' in config.sh..." |
| @grep "^optimize=" config.sh |
| @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1 |
| |
| perl.third.config: config.sh |
| @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..." |
| @$(MAKE) perl.config.dashg |
| @echo "Checking usemymalloc='n' in config.sh..." |
| @grep "^usemymalloc=" config.sh |
| @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 |
| |
| perl.third: /usr/bin/atom perl.third.config perl |
| atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl |
| @echo "Now you may run perl.third and then study perl.3log." |
| |
| # Pixie Perls (Tru64 and IRIX only) |
| |
| perl.pixie.config: config.sh |
| @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..." |
| @$(MAKE) perl.config.dashg |
| |
| perl.pixie.atom: /usr/bin/atom perl |
| atom -tool pixie -L. -all -toolargs="-quiet" perl |
| |
| perl.pixie.irix: perl |
| pixie perl |
| |
| perl.pixie: /usr/bin/pixie perl.pixie.config perl |
| if test -x /usr/bin/atom; then \ |
| $(MAKE) perl.pixie.atom; \ |
| else \ |
| $(MAKE) perl.pixie.irix; \ |
| fi |
| @echo "Now you may run perl.pixie and then run pixie." |
| |
| # Gprof Perl |
| |
| perl.config.dashpg: |
| @echo "Checking optimize='-pg' in config.sh..." |
| @grep "^optimize=" config.sh |
| @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1 |
| |
| perl.gprof.config: config.sh |
| @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..." |
| @$(MAKE) perl.config.dashpg |
| |
| perl.gprof: /usr/bin/gprof perl.gprof.config |
| @-rm -f perl |
| $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl |
| @echo "Now you may run perl.gprof and then run gprof perl.gprof." |
| |
| # Gcov Perl |
| |
| perl.config.gcov: |
| @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..." |
| @echo "Checking gccversion in config.sh..." |
| @grep "^gccversion=" config.sh |
| @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1 |
| @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..." |
| @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..." |
| @grep "^ccflags=" config.sh |
| @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1 |
| |
| perl.gcov: perl.config.gcov |
| @-rm -f perl |
| $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl |
| @echo "Now you may run perl.gcov and then run gcov some.c." |
| |
| # Microperl. This is just a convenience thing if one happens to |
| # build also the full Perl and therefore the real big Makefile: |
| # usually one should manually explicitly issue the below command. |
| |
| .PHONY: microperl |
| microperl: |
| $(MAKE) -f Makefile.micro |
| |
| !NO!SUBS! |
| |
| fi |
| |
| # Some environment have no system(), which mkpport uses. |
| # Let's try running the commands with shell. |
| case "${osname}" in |
| catamount) |
| $spitshell >>$Makefile <<!GROK!THIS! |
| .PHONY: makeppport |
| makeppport: \$(MINIPERL_EXE) \$(CONFIGPM) |
| -@for f in Makefile.PL PPPort_pm.PL PPPort_xs.PL ppport_h.PL; do \ |
| (cd ext/Devel-PPPort && `pwd`/run.sh ../../$(MINIPERL_EXE) -I../../lib \$\$f); \ |
| done |
| |
| !GROK!THIS! |
| ;; |
| *) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| .PHONY: makeppport |
| makeppport: $(MINIPERL_EXE) $(CONFIGPM) $(nonxs_ext) |
| $(MINIPERL) $(Icwd) mkppport |
| |
| !NO!SUBS! |
| ;; |
| esac |
| |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| .PHONY: preplibrary |
| preplibrary: $(MINIPERL_EXE) $(CONFIGPM) $(PREPLIBRARY_LIBPERL) |
| |
| $(CONFIGPM_FROM_CONFIG_SH): $(CONFIGPOD) |
| |
| $(CONFIGPOD): config.sh $(MINIPERL_EXE) configpm Porting/Glossary lib/Config_git.pl |
| $(MINIPERL) configpm |
| |
| lib/ExtUtils/Miniperl.pm: miniperlmain.c $(MINIPERL_EXE) minimod.pl $(CONFIGPM) |
| $(MINIPERL) minimod.pl > lib/ExtUtils/Miniperl.pm |
| |
| lib/buildcustomize.pl: $(MINIPERL_EXE) write_buildcustomize.pl |
| $(MINIPERL) write_buildcustomize.pl >lib/buildcustomize.pl |
| |
| unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data |
| |
| uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext) |
| $(MINIPERL) $(Icwd) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p |
| # Commented out so always runs, mktables looks at far more files than we |
| # can in this makefile to decide if needs to run or not |
| # touch uni.data |
| |
| # $(PERL_EXE) and ext because buildtoc uses Text::Wrap uses re |
| # But also this ensures that all extensions are built before we try to scan |
| # them, which picks up Devel::PPPort's documentation. |
| pod/perltoc.pod: $(perltoc_pod_prereqs) $(PERL_EXE) $(ext) pod/buildtoc |
| $(RUN_PERL) -f -Ilib pod/buildtoc -q |
| |
| pod/perlapi.pod: pod/perlintern.pod |
| |
| pod/perlintern.pod: $(MINIPERL_EXE) autodoc.pl embed.fnc |
| $(MINIPERL) autodoc.pl |
| |
| pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST |
| $(MINIPERL) $(Icwd) pod/perlmodlib.PL -q |
| |
| pod/perl5162delta.pod: pod/perldelta.pod |
| $(LNS) perldelta.pod pod/perl5162delta.pod |
| |
| extra.pods: $(MINIPERL_EXE) |
| -@test ! -f extra.pods || rm -f `cat extra.pods` |
| -@rm -f extra.pods |
| -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \ |
| nx=`echo $$x | sed -e "s/README\.//"`; \ |
| $(LNS) ../$$x "pod/perl"$$nx".pod" ; \ |
| echo "pod/perl"$$nx".pod" >> extra.pods ; \ |
| done |
| |
| extras.make: $(PERL_EXE) |
| -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` |
| |
| extras.test: $(PERL_EXE) |
| -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` |
| |
| extras.install: $(PERL_EXE) |
| -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` |
| |
| .PHONY: install install-strip install-all install-verbose install-silent \ |
| no-install install.perl install.man install.html |
| |
| install_strip install-strip: |
| $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)" |
| |
| install install_all install-all: |
| $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)" |
| |
| install_verbose install-verbose: |
| $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)" |
| |
| install_silent install-silent: |
| $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)" |
| |
| no_install no-install: |
| $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)" |
| |
| # Set this to an empty string to avoid an attempt of rebuild before install |
| INSTALL_DEPENDENCE = all |
| |
| install.perl: $(INSTALL_DEPENDENCE) installperl |
| $(RUN_PERL) installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS) |
| -@test ! -s extras.lst || $(MAKE) extras.install |
| |
| install.man: all installman |
| $(RUN_PERL) installman --destdir=$(DESTDIR) $(INSTALLFLAGS) |
| |
| # XXX Experimental. Hardwired values, but useful for testing. |
| # Eventually Configure could ask for some of these values. |
| install.html: all installhtml |
| -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd .. |
| $(RUN_PERL) installhtml \ |
| --podroot=. --podpath=. --recurse \ |
| --htmldir=$(privlib)/html \ |
| --htmlroot=$(privlib)/html \ |
| --splithead=pod/perlipc \ |
| --splititem=pod/perlfunc \ |
| --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \ |
| --verbose |
| |
| |
| # I now supply perly.c with the kits, so the following section is |
| # used only if you force bison to run by saying |
| # make regen_perly |
| # You normally shouldn't remake perly.[ch]. |
| |
| .PHONY: regen_perly |
| |
| run_byacc run-byacc: |
| @echo "run_byacc is obsolete; try 'make regen_perly' instead" |
| |
| # this outputs perly.h, perly.act and perly.tab |
| regen_perly regen-perly: |
| perl regen_perly.pl |
| |
| # We don't want to regenerate perly.c and perly.h, but they might |
| # appear out-of-date after a patch is applied or a new distribution is |
| # made. |
| perly.c: perly.y |
| -@sh -c true |
| |
| perly.h: perly.y |
| -@sh -c true |
| |
| SYM = globvar.sym perlio.sym |
| |
| SYMH = perlvars.h intrpvar.h |
| |
| CHMOD_W = chmod +w |
| |
| # The following files are generated automatically |
| # embed.pl: proto.h embed.h embedvar.h perlapi.h perlapi.c |
| # opcode.pl: opcode.h opnames.h pp_proto.h |
| # regcomp.pl: regnodes.h |
| # warnings.pl: warnings.h lib/warnings.pm |
| # feature.pl: feature.h lib/feature.pm |
| # The correct versions should be already supplied with the perl kit, |
| # in case you don't have perl available. |
| # To force them to be regenerated, run |
| # perl regen.pl |
| # with your existing copy of perl |
| # (make regen_headers is kept for backwards compatibility) |
| |
| AUTOGEN_FILES = opcode.h opnames.h pp_proto.h proto.h embed.h embedvar.h \ |
| perlapi.h perlapi.c regnodes.h warnings.h lib/warnings.pm \ |
| lib/feature.pm feature.h |
| |
| .PHONY: regen_headers regen_all |
| |
| regen: FORCE |
| -perl regen.pl |
| -perl regen/uconfig_h.pl |
| |
| regen_headers regen-headers: FORCE |
| -perl regen.pl -v |
| -perl regen/uconfig_h.pl -v |
| |
| regen_meta regen-meta: META.yml |
| |
| META.yml: FORCE |
| PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib Porting/makemeta |
| |
| |
| regen_all regen-all: regen regen_meta |
| |
| .PHONY: manisort manicheck |
| |
| manisort: FORCE |
| @perl Porting/manisort -q || (echo "WARNING: re-sorting MANIFEST"; \ |
| perl Porting/manisort -q -o MANIFEST; sh -c true) |
| |
| manicheck: FORCE |
| perl Porting/manicheck |
| |
| # Extensions: |
| # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will |
| # automatically get built. There should ordinarily be no need to change |
| # any of this part of makefile. |
| # |
| # The dummy dependency is a place holder in case $(dynamic_ext) or |
| # $(static_ext) is empty. |
| # |
| # DynaLoader may be needed for extensions that use Makefile.PL. |
| |
| $(DYNALOADER): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE $(nonxs_ext) |
| $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) |
| |
| d_dummy $(dynamic_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE $(PERLEXPORT) |
| $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic |
| |
| s_dummy $(static_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE |
| $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) |
| |
| n_dummy $(nonxs_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE |
| $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) |
| !NO!SUBS! |
| |
| $spitshell >>$Makefile <<EOF |
| $extra_dep |
| EOF |
| |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| .PHONY: printconfig |
| printconfig: |
| @eval `$(RUN_PERL) -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR) |
| |
| .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \ |
| realclean _realcleaner clobber _clobber \ |
| distclean veryclean _verycleaner |
| |
| clean: _tidy _mopup |
| |
| realclean: _realcleaner _mopup |
| @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh" |
| |
| _clobber: |
| -@rm -f Cross/run-* Cross/to-* Cross/from-* |
| rm -f t/test_state |
| rm -f config.sh cppstdin Policy.sh extras.lst |
| |
| clobber: _realcleaner _mopup _clobber |
| |
| distclean: clobber |
| |
| # Like distclean but also removes emacs backups and *.orig. |
| veryclean: _verycleaner _mopup _clobber |
| -@rm -f Obsolete Wanted |
| |
| # Do not 'make _mopup' directly. |
| _mopup: |
| rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c generate_uudmap$(EXE_EXT) $(generated_headers) |
| -rmdir .depending |
| -@test -f extra.pods && rm -f `cat extra.pods` |
| -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod |
| -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o pod/roffitall |
| -rm -f perl.export perl.dll perl.libexp perl.map perl.def |
| -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap |
| -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log |
| -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs |
| -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok |
| -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump |
| -rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl |
| -rm -f config.arch config.over $(DTRACE_H) runtests |
| |
| # Do not 'make _tidy' directly. |
| _tidy: |
| -cd pod; $(LDLIBPTH) $(MAKE) clean |
| -cd utils; $(LDLIBPTH) $(MAKE) clean |
| -cd x2p; $(LDLIBPTH) $(MAKE) clean |
| -rm -f lib/Config_git.pl git_version.h |
| -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ |
| $(MINIPERL) make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \ |
| done |
| |
| _cleaner1: |
| -cd os2; rm -f Makefile |
| -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN) |
| -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN) |
| -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN) |
| -@if test -f $(MINIPERL_EXE) ; then \ |
| for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ |
| $(MINIPERL) make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \ |
| done ; \ |
| else \ |
| sh $(CLEAN).sh ; \ |
| fi |
| rm -f realclean.sh veryclean.sh |
| -for file in `find cpan dist ext -name ppport.h` ; do rm -f $$file; done |
| |
| # Dear POSIX, thanks for making the default to xargs to be |
| # run once if nothhing is passed in. It is such a great help. |
| |
| # Some systems do not support "?", so keep these files separate. |
| _cleaner2: |
| -rm -f core.*perl.*.? t/core.perl.*.? .?*.c |
| rm -f core *perl.core t/core t/*perl.core core.* t/core.* |
| rm -f t/$(PERL_EXE) t/rantests |
| rm -rf t/tmp* |
| rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) |
| rm -rf $(addedbyconf) |
| rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old |
| rm -f $(private) |
| rm -rf $(unidatafiles) $(unidatadirs) |
| rm -rf lib/auto |
| rm -f lib/.exists lib/*/.exists lib/*/*/.exists |
| rm -f h2ph.man pstruct |
| rm -rf .config |
| rm -f preload |
| rm -rf lib/Encode lib/Compress lib/Hash lib/re |
| rm -rf lib/TAP lib/Module/Pluggable lib/App |
| rm -rf lib/mro |
| rm -rf lib/IO/Compress lib/IO/Uncompress |
| rm -f lib/ExtUtils/ParseXS/t/XSTest.c |
| rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT) |
| rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX) |
| rm -fr lib/B |
| rm -fr lib/CPAN lib/CPANPLUS |
| rm -fr lib/ExtUtils/CBuilder |
| rm -f pod2htmd.tmp |
| rm -rf pod/perlfunc pod/perlipc |
| -rmdir cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-localmirror |
| -rmdir ext/B/lib |
| -rmdir lib/Archive/Tar lib/Archive lib/Attribute |
| -rmdir lib/CGI lib/Carp |
| -rmdir lib/Data lib/Devel lib/Digest |
| -rmdir lib/ExtUtils/Command lib/ExtUtils/Constant lib/ExtUtils/Liblist lib/ExtUtils/MakeMaker |
| -rmdir lib/File/Spec lib/Filter/Util lib/Filter |
| -rmdir lib/I18N/LangTags lib/IO/Socket lib/IO lib/IPC |
| -rmdir lib/List/Util lib/List |
| -rmdir lib/Locale/Maketext lib/Locale |
| -rmdir lib/Log/Message lib/Log |
| -rmdir lib/Math/Big* lib/Math |
| -rmdir lib/Memoize lib/MIME |
| -rmdir lib/Module/Build/Platform lib/Module/Build lib/Module/Load lib/Module |
| -rmdir lib/Net/FTP lib/Object |
| -rmdir lib/Parse/CPAN lib/Parse |
| -rmdir lib/PerlIO/via lib/PerlIO |
| -rmdir lib/Package lib/Params |
| -rmdir lib/Pod/Perldoc lib/Pod/Simple lib/Pod/Text |
| -rmdir lib/Sys lib/Scalar/Util lib/Scalar |
| -rmdir lib/Term/UI lib/Thread lib/Tie/Hash |
| -rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test |
| -rmdir lib/Unicode/Collate |
| -rmdir lib/XS/APItest lib/XS |
| -rmdir lib/inc/latest lib/inc |
| -rmdir lib/autodie/exception lib/autodie lib/encoding lib/threads |
| -rm -f lib/ExtUtils/CBuilder/t/libcompilet.dll.a |
| -rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a |
| |
| _realcleaner: |
| @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=distclean |
| @$(LDLIBPTH) $(MAKE) _cleaner2 |
| |
| _verycleaner: |
| @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean |
| @$(LDLIBPTH) $(MAKE) _cleaner2 |
| -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig |
| |
| .PHONY: lint |
| lint: $(c) |
| rm -f *.ln |
| lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) |
| |
| .PHONY: splint |
| splint: $(c) |
| splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles) |
| |
| # Need to unset during recursion to go out of loop. |
| # The README below ensures that the dependency list is never empty and |
| # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. |
| |
| MAKEDEPEND = Makefile makedepend |
| |
| $(FIRSTMAKEFILE): README $(MAKEDEPEND) |
| $(MAKE) depend MAKEDEPEND= |
| |
| config.h: config_h.SH config.sh |
| $(SHELL) config_h.SH |
| |
| .PHONY: depend |
| depend: makedepend |
| sh ./makedepend MAKE=$(MAKE) |
| cd x2p; $(MAKE) depend |
| |
| # Cannot postpone this until $firstmakefile is ready ;-) |
| makedepend: makedepend.SH config.sh |
| sh ./makedepend.SH |
| |
| runtests: runtests.SH config.sh |
| sh ./runtests.SH |
| |
| .PHONY: test check test_prep test_prep_nodll test_prep_pre \ |
| test_prep_reonly test_tty test-tty test_notty test-notty \ |
| utest ucheck test.utf8 check.utf8 test.torture torturetest \ |
| test.utf16 check.utf16 utest.utf16 ucheck.utf16 \ |
| test.third check.third utest.third ucheck.third test_notty.third \ |
| test.deparse test_notty.deparse test_harness test_harness_notty \ |
| minitest coretest test.taintwarn test-reonly _test |
| |
| _test: |
| echo >&2 The _test target is deprecated. Please upgrade your smoker |
| PERL=./perl $(RUN_TESTS) choose |
| |
| # Cannot delegate rebuilding of t/perl to make |
| # to allow interlaced test and minitest |
| |
| # Architecture-neutral stuff: |
| |
| test_prep_pre: preplibrary utilities $(nonxs_ext) |
| |
| test_prep test-prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) \ |
| $(dynamic_ext) $(TEST_PERL_DLL) runtests x2p/s2p x2p/find2perl \ |
| $(generated_pods) |
| cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE)) |
| |
| test_prep_reonly: $(MINIPERL_EXE) $(PERL_EXE) $(dynamic_ext_re) $(TEST_PERL_DLL) |
| $(MINIPERL) make_ext.pl $(dynamic_ext_re) MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic |
| cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE)) |
| |
| test check: test_prep |
| $(RUN_TESTS) choose |
| |
| test_tty test-tty: test_prep |
| $(RUN_TESTS) tty |
| |
| test_notty test-notty: test_prep |
| $(RUN_TESTS) no-tty |
| |
| utest ucheck test.utf8 check.utf8: test_prep |
| TEST_ARGS=-utf8 $(RUN_TESTS) choose |
| |
| coretest: test_prep |
| TEST_ARGS=-core $(RUN_TESTS) choose |
| |
| # Torture testing |
| |
| test.torture torturetest: test_prep |
| TEST_ARGS=-torture $(RUN_TESTS) choose |
| |
| # Targets for UTF16 testing: |
| |
| minitest.utf16: minitest.prep |
| - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \ |
| && $(RUN_PERL) TEST -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty |
| |
| test.utf16 check.utf16: test_prep |
| TEST_ARGS=-utf16 $(RUN_TESTS) choose |
| |
| utest.utf16 ucheck.utf16: test_prep |
| TEST_ARGS="-utf8 -utf16" $(RUN_TESTS) choose |
| |
| !NO!SUBS! |
| |
| case "${osname}${osvers}" in |
| linux*|darwin*) |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| # Targets for valgrind testing: |
| |
| test_prep.valgrind: test_prep perl.valgrind |
| |
| test.valgrind check.valgrind: test_prep perl.valgrind.config |
| PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(RUN_TESTS) choose |
| |
| utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config |
| PERL_VALGRIND=1 TEST_ARGS=-utf8 $(RUN_TESTS) choose |
| |
| test_notty.valgrind: test_prep.valgrind perl.valgrind.config |
| PERL_VALGRIND=1 $(RUN_TESTS) no-tty |
| !NO!SUBS! |
| ;; |
| esac |
| |
| $spitshell >>$Makefile <<'!NO!SUBS!' |
| |
| # Targets for Third Degree testing. |
| |
| test_prep.third: test_prep perl.third |
| cd t && (rm -f ./perl.third$(EXE_EXT); $(LNS) ../perl.third$(EXE_EXT) perl.third(EXE_EXT)) |
| |
| test.third check.third: test_prep.third perl.third |
| PERL=./perl.third PERL_3LOG=1 $(RUN_TESTS) choose |
| |
| utest.third ucheck.third: test_prep.third perl.third |
| PERL=./perl.third PERL_3LOG=1 TEST_ARGS=-utf8 $(RUN_TESTS) choose |
| |
| test_notty.third: test_prep.third perl.third |
| PERL=./perl.third PERL_3LOG=1 $(RUN_TESTS) choose |
| |
| # Targets for Deparse testing. |
| |
| test.deparse: test_prep |
| TEST_ARGS=-deparse $(RUN_TESTS) choose |
| |
| test_notty.deparse: test_prep |
| TEST_ARGS=-deparse $(RUN_TESTS) no-tty |
| |
| # Targets to run the test suite with -t |
| |
| test.taintwarn: test_prep |
| TEST_ARGS=-taintwarn $(RUN_TESTS) choose |
| |
| minitest.prep: |
| -@test -f lib/Config.pm || $(MAKE) lib/Config.pm $(unidatafiles) |
| @echo " " |
| @echo "You may see some irrelevant test failures if you have been unable" |
| @echo "to build lib/Config.pm, or the Unicode data files." |
| @echo " " |
| |
| # Can't depend on lib/Config.pm because that might be where miniperl |
| # is crashing. |
| minitest: $(MINIPERL_EXE) minitest.prep |
| - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \ |
| && $(RUN_PERL) TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t op/*.t uni/*.t </dev/tty |
| |
| # Test via harness |
| |
| test_harness test-harness: test_prep |
| TESTFILE=harness $(RUN_TESTS) choose |
| |
| test_harness_notty: test_prep |
| HARNESS_NOTTY=1 TESTFILE=harness $(RUN_TESTS) choose |
| |
| test_reonly test-reonly: test_prep_reonly |
| TEST_ARGS='-re \bre\/' TESTFILE=harness $(RUN_TESTS) choose |
| |
| |
| # Porting tests (well-formedness of pod, manifest, etc) |
| |
| test_porting test-porting: test_prep |
| cd t && $(RUN_PERL) harness porting/*.t ../lib/diagnostics.t |
| |
| # Handy way to run perlbug -ok without having to install and run the |
| # installed perlbug. We don't re-run the tests here - we trust the user. |
| # Please *don't* use this unless all tests pass. |
| # If you want to report test failures, use "make nok" instead. |
| |
| .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack |
| |
| ok: utilities |
| $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' |
| |
| okfile: utilities |
| $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok |
| |
| oknack: utilities |
| $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A |
| |
| okfilenack: utilities |
| $(RUN_PERL) -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A |
| |
| nok: utilities |
| $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' |
| |
| nokfile: utilities |
| $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok |
| |
| noknack: utilities |
| $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A |
| |
| nokfilenack: utilities |
| $(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A |
| |
| .PHONY: clist hlist shlist |
| |
| clist: $(c) |
| echo $(c) | tr ' ' $(TRNL) >.clist |
| |
| hlist: $(h) |
| echo $(h) | tr ' ' $(TRNL) >.hlist |
| |
| shlist: $(sh) |
| echo $(sh) | tr ' ' $(TRNL) >.shlist |
| |
| Makefile: Makefile.SH ./config.sh |
| $(SHELL) Makefile.SH |
| |
| .PHONY: distcheck |
| distcheck: FORCE |
| perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' |
| |
| .PHONY: ctags |
| |
| ctags: |
| ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c --exclude=perlmini.c *.c *.h |
| |
| # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE |
| # If this runs make out of memory, delete /usr/include lines. |
| !NO!SUBS! |
| |
| $eunicefix Makefile |
| case `pwd` in |
| *SH) |
| $rm -f ../Makefile |
| $ln Makefile ../Makefile |
| ;; |
| esac |
| $rm -f $firstmakefile |
| |
| # Now do any special processing required before building. |
| |
| case "$ebcdic" in |
| define) |
| xxx='' |
| echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2 |
| case "$osname" in |
| os390|posix-bc) |
| if cd x2p |
| then |
| rm -f y.tab.c y.tab.h |
| case "$osname" in |
| posix-bc) |
| # we are using two different yaccs in BS2000 Posix! |
| byacc a2p.y >/dev/null 2>&1 |
| ;; |
| *) # e.g. os390 |
| yacc a2p.y >/dev/null 2>&1 |
| ;; |
| esac |
| if cmp -s y.tab.c a2p.c |
| then |
| rm -f y.tab.c |
| else |
| echo "a2p.y -> a2p.c" >&2 |
| mv -f y.tab.c a2p.c |
| chmod u+w a2p.c |
| sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ |
| -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \ |
| -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c |
| xxx="$xxx a2p.c" |
| fi |
| # In case somebody yacc -d:ed the a2p.y. |
| if test -f y.tab.h |
| then |
| if cmp -s y.tab.h a2p.h |
| then |
| rm -f y.tab.h |
| else |
| echo "a2p.h -> a2p.h" >&2 |
| mv -f y.tab.h a2p.h |
| xxx="$xxx a2p.h" |
| fi |
| fi |
| cd .. |
| fi |
| ;; |
| vmesa) |
| # Do nothing in VM/ESA. |
| ;; |
| *) |
| echo "'$osname' is an EBCDIC system I don't know that well." >&4 |
| ;; |
| esac |
| case "$xxx" in |
| '') echo "No parser files were regenerated. That's okay." >&2 ;; |
| esac |
| ;; |
| esac |
| |
| # ex: set ts=8 sts=4 sw=4 noet: |
