| # Makefile.in generated by automake 1.15.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2017 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # -*-Makefile-*-, or close enough |
| # Copyright (C) 2000-2016 Free Software Foundation, Inc. |
| # This file is part of GNU Make. |
| # |
| # GNU Make is free software; you can redistribute it and/or modify it under |
| # the terms of the GNU General Public License as published by the Free Software |
| # Foundation; either version 3 of the License, or (at your option) any later |
| # version. |
| # |
| # GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY |
| # WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS |
| # FOR A PARTICULAR PURPOSE. See the GNU General Public License for more |
| # details. |
| # |
| # You should have received a copy of the GNU General Public License along with |
| # this program. If not, see <http://www.gnu.org/licenses/>. |
| VPATH = @srcdir@ |
| am__is_gnu_make = { \ |
| if test -z '$(MAKELEVEL)'; then \ |
| false; \ |
| elif test -n '$(MAKE_HOST)'; then \ |
| true; \ |
| elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ |
| true; \ |
| else \ |
| false; \ |
| fi; \ |
| } |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| subdir = doc |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \ |
| $(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \ |
| $(top_srcdir)/config/intlmacosx.m4 \ |
| $(top_srcdir)/config/lib-ld.m4 \ |
| $(top_srcdir)/config/lib-link.m4 \ |
| $(top_srcdir)/config/lib-prefix.m4 \ |
| $(top_srcdir)/config/longlong.m4 $(top_srcdir)/config/nls.m4 \ |
| $(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \ |
| $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/version.texi \ |
| $(srcdir)/stamp-vti $(am__DIST_COMMON) |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| SOURCES = |
| DIST_SOURCES = |
| AM_V_DVIPS = $(am__v_DVIPS_@AM_V@) |
| am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@) |
| am__v_DVIPS_0 = @echo " DVIPS " $@; |
| am__v_DVIPS_1 = |
| AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@) |
| am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@) |
| am__v_MAKEINFO_0 = @echo " MAKEINFO" $@; |
| am__v_MAKEINFO_1 = |
| AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@) |
| am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@) |
| am__v_INFOHTML_0 = @echo " INFOHTML" $@; |
| am__v_INFOHTML_1 = |
| AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@) |
| am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@) |
| am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@; |
| am__v_TEXI2DVI_1 = |
| AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@) |
| am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@) |
| am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@; |
| am__v_TEXI2PDF_1 = |
| AM_V_texinfo = $(am__v_texinfo_@AM_V@) |
| am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@) |
| am__v_texinfo_0 = -q |
| am__v_texinfo_1 = |
| AM_V_texidevnull = $(am__v_texidevnull_@AM_V@) |
| am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@) |
| am__v_texidevnull_0 = > /dev/null |
| am__v_texidevnull_1 = |
| INFO_DEPS = $(srcdir)/make.info |
| TEXINFO_TEX = $(top_srcdir)/config/texinfo.tex |
| am__TEXINFO_TEX_DIR = $(top_srcdir)/config |
| DVIS = make.dvi |
| PDFS = make.pdf |
| PSS = make.ps |
| HTMLS = make.html |
| TEXINFOS = make.texi |
| TEXI2DVI = texi2dvi |
| TEXI2PDF = $(TEXI2DVI) --pdf --batch |
| MAKEINFOHTML = $(MAKEINFO) --html |
| AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) |
| DVIPS = dvips |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| am__installdirs = "$(DESTDIR)$(infodir)" |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) |
| am__DIST_COMMON = $(make_TEXINFOS) $(srcdir)/Makefile.in \ |
| $(top_srcdir)/config/mdate-sh $(top_srcdir)/config/texinfo.tex |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ACLOCAL = @ACLOCAL@ |
| ALLOCA = @ALLOCA@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AM_LDFLAGS = @AM_LDFLAGS@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| GETLOADAVG_LIBS = @GETLOADAVG_LIBS@ |
| GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ |
| GLOBINC = @GLOBINC@ |
| GLOBLIB = @GLOBLIB@ |
| GMSGFMT = @GMSGFMT@ |
| GMSGFMT_015 = @GMSGFMT_015@ |
| GREP = @GREP@ |
| GUILE_CFLAGS = @GUILE_CFLAGS@ |
| GUILE_LIBS = @GUILE_LIBS@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INTLLIBS = @INTLLIBS@ |
| INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ |
| KMEM_GROUP = @KMEM_GROUP@ |
| LDFLAGS = @LDFLAGS@ |
| LIBICONV = @LIBICONV@ |
| LIBINTL = @LIBINTL@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LTLIBICONV = @LTLIBICONV@ |
| LTLIBINTL = @LTLIBINTL@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MAKE_HOST = @MAKE_HOST@ |
| MKDIR_P = @MKDIR_P@ |
| MSGFMT = @MSGFMT@ |
| MSGFMT_015 = @MSGFMT_015@ |
| MSGMERGE = @MSGMERGE@ |
| NEED_SETGID = @NEED_SETGID@ |
| OBJEXT = @OBJEXT@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PERL = @PERL@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ |
| PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ |
| POSUB = @POSUB@ |
| RANLIB = @RANLIB@ |
| REMOTE = @REMOTE@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| XGETTEXT = @XGETTEXT@ |
| XGETTEXT_015 = @XGETTEXT_015@ |
| XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| runstatedir = @runstatedir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| TEXI2HTML = texi2html |
| TEXI2HTML_FLAGS = -split_chapter |
| info_TEXINFOS = make.texi |
| make_TEXINFOS = fdl.texi make-stds.texi |
| CLEANFILES = make*.html |
| all: all-am |
| |
| .SUFFIXES: |
| .SUFFIXES: .dvi .html .info .pdf .ps .texi |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign doc/Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(am__aclocal_m4_deps): |
| |
| .texi.info: |
| $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \ |
| am__cwd=`pwd` && $(am__cd) $(srcdir) && \ |
| rm -rf $$backupdir && mkdir $$backupdir && \ |
| if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ |
| for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ |
| if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ |
| done; \ |
| else :; fi && \ |
| cd "$$am__cwd"; \ |
| if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $@ $<; \ |
| then \ |
| rc=0; \ |
| $(am__cd) $(srcdir); \ |
| else \ |
| rc=$$?; \ |
| $(am__cd) $(srcdir) && \ |
| $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ |
| fi; \ |
| rm -rf $$backupdir; exit $$rc |
| |
| .texi.dvi: |
| $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \ |
| $< |
| |
| .texi.pdf: |
| $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \ |
| $< |
| |
| .texi.html: |
| $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp) |
| $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $(@:.html=.htp) $<; \ |
| then \ |
| rm -rf $@ && mv $(@:.html=.htp) $@; \ |
| else \ |
| rm -rf $(@:.html=.htp); exit 1; \ |
| fi |
| $(srcdir)/make.info: make.texi $(srcdir)/version.texi $(make_TEXINFOS) |
| make.dvi: make.texi $(srcdir)/version.texi $(make_TEXINFOS) |
| make.pdf: make.texi $(srcdir)/version.texi $(make_TEXINFOS) |
| make.html: make.texi $(srcdir)/version.texi $(make_TEXINFOS) |
| $(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti |
| $(srcdir)/stamp-vti: make.texi $(top_srcdir)/configure |
| @(dir=.; test -f ./make.texi || dir=$(srcdir); \ |
| set `$(SHELL) $(top_srcdir)/config/mdate-sh $$dir/make.texi`; \ |
| echo "@set UPDATED $$1 $$2 $$3"; \ |
| echo "@set UPDATED-MONTH $$2 $$3"; \ |
| echo "@set EDITION $(VERSION)"; \ |
| echo "@set VERSION $(VERSION)") > vti.tmp$$$$ && \ |
| (cmp -s vti.tmp$$$$ $(srcdir)/version.texi \ |
| || (echo "Updating $(srcdir)/version.texi" && \ |
| cp vti.tmp$$$$ $(srcdir)/version.texi.tmp$$$$ && \ |
| mv $(srcdir)/version.texi.tmp$$$$ $(srcdir)/version.texi)) && \ |
| rm -f vti.tmp$$$$ $(srcdir)/version.texi.$$$$ |
| @cp $(srcdir)/version.texi $@ |
| |
| mostlyclean-vti: |
| -rm -f vti.tmp* $(srcdir)/version.texi.tmp* |
| |
| maintainer-clean-vti: |
| @MAINTAINER_MODE_TRUE@ -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi |
| .dvi.ps: |
| $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| $(DVIPS) $(AM_V_texinfo) -o $@ $< |
| |
| uninstall-dvi-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(dvidir)/$$f"; \ |
| done |
| |
| uninstall-html-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ |
| rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ |
| done |
| |
| uninstall-info-am: |
| @$(PRE_UNINSTALL) |
| @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ |
| if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ |
| then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \ |
| done; \ |
| else :; fi |
| @$(NORMAL_UNINSTALL) |
| @list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ |
| echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ |
| rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ |
| else :; fi); \ |
| done |
| |
| uninstall-pdf-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ |
| done |
| |
| uninstall-ps-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(PSS)'; test -n "$(psdir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(psdir)/$$f"; \ |
| done |
| |
| dist-info: $(INFO_DEPS) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| list='$(INFO_DEPS)'; \ |
| for base in $$list; do \ |
| case $$base in \ |
| $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ |
| esac; \ |
| if test -f $$base; then d=.; else d=$(srcdir); fi; \ |
| base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ |
| if test -f $$file; then \ |
| relfile=`expr "$$file" : "$$d/\(.*\)"`; \ |
| test -f "$(distdir)/$$relfile" || \ |
| cp -p $$file "$(distdir)/$$relfile"; \ |
| else :; fi; \ |
| done; \ |
| done |
| |
| mostlyclean-aminfo: |
| -rm -rf make.t2d make.t2p |
| |
| clean-aminfo: |
| -test -z "make.dvi make.pdf make.ps make.html" \ |
| || rm -rf make.dvi make.pdf make.ps make.html |
| |
| maintainer-clean-aminfo: |
| @list='$(INFO_DEPS)'; for i in $$list; do \ |
| i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ |
| rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ |
| done |
| tags TAGS: |
| |
| ctags CTAGS: |
| |
| cscope cscopelist: |
| |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-info |
| check-am: all-am |
| check: check-am |
| all-am: Makefile $(INFO_DEPS) |
| installdirs: |
| for dir in "$(DESTDIR)$(infodir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-am |
| install-exec: install-exec-am |
| install-data: install-data-am |
| uninstall: uninstall-am |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-am |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-am |
| |
| clean-am: clean-aminfo clean-generic mostlyclean-am |
| |
| distclean: distclean-am |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic |
| |
| dvi: dvi-am |
| |
| dvi-am: $(DVIS) |
| |
| html: html-am |
| |
| html-am: $(HTMLS) |
| |
| info: info-am |
| |
| info-am: $(INFO_DEPS) |
| |
| install-data-am: install-info-am |
| |
| install-dvi: install-dvi-am |
| |
| install-dvi-am: $(DVIS) |
| @$(NORMAL_INSTALL) |
| @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \ |
| done |
| install-exec-am: |
| |
| install-html: install-html-am |
| |
| install-html-am: $(HTMLS) |
| @$(NORMAL_INSTALL) |
| @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| $(am__strip_dir) \ |
| d2=$$d$$p; \ |
| if test -d "$$d2"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ |
| echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \ |
| else \ |
| list2="$$list2 $$d2"; \ |
| fi; \ |
| done; \ |
| test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ |
| done; } |
| install-info: install-info-am |
| |
| install-info-am: $(INFO_DEPS) |
| @$(NORMAL_INSTALL) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \ |
| fi; \ |
| for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| esac; \ |
| if test -f $$file; then d=.; else d=$(srcdir); fi; \ |
| file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ |
| $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ |
| if test -f $$ifile; then \ |
| echo "$$ifile"; \ |
| else : ; fi; \ |
| done; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done |
| @$(POST_INSTALL) |
| @if $(am__can_run_installinfo); then \ |
| list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ |
| install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ |
| done; \ |
| else : ; fi |
| install-man: |
| |
| install-pdf: install-pdf-am |
| |
| install-pdf-am: $(PDFS) |
| @$(NORMAL_INSTALL) |
| @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done |
| install-ps: install-ps-am |
| |
| install-ps-am: $(PSS) |
| @$(NORMAL_INSTALL) |
| @list='$(PSS)'; test -n "$(psdir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-am |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-aminfo \ |
| maintainer-clean-generic maintainer-clean-vti |
| |
| mostlyclean: mostlyclean-am |
| |
| mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti |
| |
| pdf: pdf-am |
| |
| pdf-am: $(PDFS) |
| |
| ps: ps-am |
| |
| ps-am: $(PSS) |
| |
| uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ |
| uninstall-pdf-am uninstall-ps-am |
| |
| .MAKE: install-am install-strip |
| |
| .PHONY: all all-am check check-am clean clean-aminfo clean-generic \ |
| cscopelist-am ctags-am dist-info distclean distclean-generic \ |
| distdir dvi dvi-am html html-am info info-am install \ |
| install-am install-data install-data-am install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-info install-info-am install-man \ |
| install-pdf install-pdf-am install-ps install-ps-am \ |
| install-strip installcheck installcheck-am installdirs \ |
| maintainer-clean maintainer-clean-aminfo \ |
| maintainer-clean-generic maintainer-clean-vti mostlyclean \ |
| mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \ |
| pdf-am ps ps-am tags-am uninstall uninstall-am \ |
| uninstall-dvi-am uninstall-html-am uninstall-info-am \ |
| uninstall-pdf-am uninstall-ps-am |
| |
| .PRECIOUS: Makefile |
| |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
