<!--
 Copyright (c) 1998, 2006, Oracle and/or its affiliates. All rights reserved.
 DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 This code is free software; you can redistribute it and/or modify it
 under the terms of the GNU General Public License version 2 only, as
 published by the Free Software Foundation.  Oracle designates this
 particular file as subject to the "Classpath" exception as provided
 by Oracle in the LICENSE file that accompanied this code.

 This code is distributed in the hope that it will be useful, but WITHOUT
 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 version 2 for more details (a copy is included in the LICENSE file that
 accompanied this code).

 You should have received a copy of the GNU General Public License version
 2 along with this work; if not, write to the Free Software Foundation,
 Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 or visit www.oracle.com if you need additional information or have any
 questions.
-->

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
<html>
<body bgcolor="white">

Provides the classes for implementing networking applications.

<p> The java.net package can be roughly divided in two sections:</p>
<ul>
    <li> <p><i>A Low Level API</i>, which deals with the following abstractions:</p></li>
    <ul>
      <li><p><i>Addresses</i>, which are networking identifiers, like IP addresses.</p></li>
      <li><p><i>Sockets</i>, which are basic bidirectional data communication mechanisms.</p></li>
      <li><p><i>Interfaces</i>, which describe network interfaces. </p></li>
    </ul>
    <li> <p><i>A High Level API</i>, which deals with the following abstractions:</p></li>
    <ul>
      <li><p><i>URIs</i>, which represent Universal Resource Identifiers.</p></li>
      <li><p><i>URLs</i>, which represent Universal Resource Locators.</p></li>
      <li><p><i>Connections</i>, which represents connections to the resource pointed to by <i>URLs</i>.</p></li>
      </ul>
</ul>
<h2>Addresses</h2>
<p>Addresses are used throughout the java.net APIs as either host identifiers, or socket endpoint identifiers.</p>
<p>The {@link java.net.InetAddress} class is the abstraction representing an IP (Internet Protocol) address.  It has two subclasses:
<ul>
      <li>{@link java.net.Inet4Address} for IPv4 addresses.</li>
      <li>{@link java.net.Inet6Address} for IPv6 addresses.</li>
</ul>
<p>But, in most cases, there is no need to deal directly with the subclasses, as the InetAddress abstraction should cover most of the needed functionality.</p>
<h3><b>About IPv6</b></h3>
<p>Not all systems have support for the IPv6 protocol, and while the Java networking stack will attempt to detect it and use it transparently when available, it is also possible to disable its use with a system property. In the case where IPv6 is not available, or explicitly disabled, Inet6Address are not valid arguments for most networking operations any more. While methods like {@link java.net.InetAddress#getByName} are guaranteed not to return an Inet6Address when looking up host names, it is possible, by passing literals, to create such an object. In which case, most methods, when called with an Inet6Address will throw an Exception.</p>
<h2>Sockets</h2>
<p>Sockets are means to establish a communication link between machines over the network. The java.net package provides 4 kinds of Sockets:</p>
<ul>
      <li>{@link java.net.Socket} is a TCP client API, and will typically be used to {@linkplain java.net.Socket#connect(SocketAddress) connect} to a remote host.</li>
      <li>{@link java.net.ServerSocket} is a TCP server API, and will typically {@linkplain java.net.ServerSocket#accept accept} connections from client sockets.</li>
      <li>{@link java.net.DatagramSocket} is a UDP endpoint API and is used to {@linkplain java.net.DatagramSocket#send send} and {@linkplain java.net.DatagramSocket#receive receive} {@linkplain java.net.DatagramPacket datagram packets}.</li>
      <li>{@link java.net.MulticastSocket} is a subclass of {@code DatagramSocket} used when dealing with multicast groups.</li>
</ul>
<p>Sending and receiving with TCP sockets is done through InputStreams and OutputStreams which can be obtained via the {@link java.net.Socket#getInputStream} and {@link java.net.Socket#getOutputStream} methods.</p>
<h2>Interfaces</h2>
<p>The {@link java.net.NetworkInterface} class provides APIs to browse and query all the networking interfaces (e.g. ethernet connection or PPP endpoint) of the local machine. It is through that class that you can check if any of the local interfaces is configured to support IPv6.</p>

<h2>High level API</h2>
<p>A number of classes in the java.net package do provide for a much higher level of abstraction and allow for easy access to resources on the network. The classes are:
<ul>
      <li>{@link java.net.URI} is the class representing a Universal Resource Identifier, as specified in RFC 2396. As the name indicates, this is just an Identifier and doesn't provide directly the means to access the resource.</li>
      <li>{@link java.net.URL} is the class representing a Universal Resource Locator, which is both an older concept for URIs and a means to access the resources.</li>
      <li>{@link java.net.URLConnection} is created from a URL and is the communication link used to access the resource pointed by the URL. This abstract class will delegate most of the work to the underlying protocol handlers like http or ftp.</li>
      <li>{@link java.net.HttpURLConnection} is a subclass of URLConnection and provides some additional functionalities specific to the HTTP protocol.</li>
</ul>
<p>The recommended usage is to use {@link java.net.URI} to identify resources, then convert it into a {@link java.net.URL} when it is time to access the resource. From that URL, you can either get the {@link java.net.URLConnection} for fine control, or get directly the InputStream.<p>
<p>Here is an example:</p>
<p><code>
URI uri = new URI("http://java.sun.com/");<br>
URL url = uri.toURL();<br>
InputStream in = url.openStream();
</code></p>
<h2>Protocol Handlers</h2>
As mentioned, URL and URLConnection rely on protocol handlers which must be present, otherwise an Exception is thrown. This is the major difference with URIs which only identify resources, and therefore don't need to have access to the protocol handler. So, while it is possible to create an URI with any kind of protocol scheme (e.g. <code>myproto://myhost.mydomain/resource/</code>), a similar URL will try to instantiate the handler for the specified protocol; if it doesn't exist an exception will be thrown.</p>
<p>By default the protocol handlers are loaded dynamically from the default location. It is, however, possible to add to the search path by setting the <code>java.protocol.handler.pkgs</code> system property. For instance if it is set to <code>myapp.protocols</code>, then the URL code will try, in the case of http, first to load <code>myapp.protocols.http.Handler</code>, then, if this fails, <code>http.Handler</code> from the default location.<p>
<p>Note that the Handler class <b>has to</b> be a subclass of the abstract class {@link java.net.URLStreamHandler}.</p>
<h2>Additional Specification</h2>
<ul>
      <li><a href="doc-files/net-properties.html">Networking System Properties</a></li>
</ul>
<!--
<h2>Package Specification</h2>

##### FILL IN ANY SPECS NEEDED BY JAVA COMPATIBILITY KIT #####
<ul>
  <li><a href="">##### REFER TO ANY FRAMEMAKER SPECIFICATION HERE #####</a>
</ul>

<h2>Related Documentation</h2>

For overviews, tutorials, examples, guides, and tool documentation, please see:
<ul>
  <li><a href="">##### REFER TO NON-SPEC DOCUMENTATION HERE #####</a>
</ul>

-->

@since JDK1.0
</body>
</html>