| # |
| # Copyright (c) 2011, 2021, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the LICENSE file that accompanied this code. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| |
| # When you read this source. Remember that $(sort ...) has the side effect |
| # of removing duplicates. It is actually this side effect that is |
| # desired whenever sort is used below! |
| |
| ifndef _NATIVE_COMPILATION_GMK |
| _NATIVE_COMPILATION_GMK := 1 |
| |
| ifeq ($(_MAKEBASE_GMK), ) |
| $(error You must include MakeBase.gmk prior to including NativeCompilation.gmk) |
| endif |
| |
| ################################################################################ |
| # Create exported symbols file for static libraries |
| ################################################################################ |
| |
| # get the exported symbols from mapfiles and if there |
| # is no mapfile, get them from the archive |
| define GetSymbols |
| $(RM) $$(@D)/$$(basename $$(@F)).symbols; \ |
| if [ ! -z $$($1_MAPFILE) -a -e $$($1_MAPFILE) ]; then \ |
| $(ECHO) "Getting symbols from mapfile $$($1_MAPFILE)"; \ |
| $(AWK) '/global:/','/local:/' $$($1_MAPFILE) | \ |
| $(SED) -e 's/#.*//;s/global://;s/local://;s/\;//;s/^[ ]*/_/;/^_$$$$/d' | \ |
| $(EGREP) -v "JNI_OnLoad|JNI_OnUnload|Agent_OnLoad|Agent_OnUnload|Agent_OnAttach" > \ |
| $$(@D)/$$(basename $$(@F)).symbols || true; \ |
| $(NM) $$($1_TARGET) | $(GREP) " T " | \ |
| $(EGREP) "JNI_OnLoad|JNI_OnUnload|Agent_OnLoad|Agent_OnUnload|Agent_OnAttach" | \ |
| $(CUT) -d ' ' -f 3 >> $$(@D)/$$(basename $$(@F)).symbols || true;\ |
| else \ |
| $(ECHO) "Getting symbols from nm"; \ |
| $(NM) -m $$($1_TARGET) | $(GREP) "__TEXT" | \ |
| $(EGREP) -v "non-external|private extern|__TEXT,__eh_frame" | \ |
| $(SED) -e 's/.* //' > $$(@D)/$$(basename $$(@F)).symbols; \ |
| fi |
| endef |
| |
| ################################################################################ |
| # Creates a recipe that creates a compile_commands.json fragment. Remove any |
| # occurences of FIXPATH programs from the command to show the actual invocation. |
| # |
| # Param 1: Name of file to create |
| # Param 2: Working directory |
| # Param 3: Source file |
| # Param 4: Compile command |
| # Param 5: Object name |
| ################################################################################ |
| define WriteCompileCommandsFragment |
| $(call LogInfo, Creating compile commands fragment for $(notdir $3)) |
| $(call MakeDir, $(dir $1)) |
| $(call WriteFile,{ \ |
| "directory": "$(strip $(call FixPath, $2))"$(COMMA) \ |
| "file": "$(strip $(call FixPath, $3))"$(COMMA) \ |
| "command": "$(strip $(subst $(DQUOTE),\$(DQUOTE),$(subst \,\\,\ |
| $(subst $(FIXPATH),,$(call FixPath, $4)))))"$(COMMA) \ |
| "output": "$(strip $(call FixPath, $5))" \ |
| }$(COMMA), \ |
| $1) |
| endef |
| |
| ################################################################################ |
| # Define a native toolchain configuration that can be used by |
| # SetupNativeCompilation calls |
| # |
| # Parameter 1 is the name of the toolchain definition |
| # |
| # Remaining parameters are named arguments: |
| # EXTENDS - Optional parent definition to get defaults from |
| # CC - The C compiler |
| # CXX - The C++ compiler |
| # LD - The Linker |
| # AR - Static linker |
| # AS - Assembler |
| # MT - Windows MT tool |
| # RC - Windows RC tool |
| # OBJCOPY - The objcopy tool for debug symbol handling |
| # STRIP - The tool to use for stripping debug symbols |
| # SYSROOT_CFLAGS - Compiler flags for using the specific sysroot |
| # SYSROOT_LDFLAGS - Linker flags for using the specific sysroot |
| DefineNativeToolchain = $(NamedParamsMacroTemplate) |
| define DefineNativeToolchainBody |
| # If extending another definition, get default values from that, |
| # otherwise, nothing more needs to be done as variable assignments |
| # already happened in NamedParamsMacroTemplate. |
| ifneq ($$($1_EXTENDS), ) |
| $$(call SetIfEmpty, $1_CC, $$($$($1_EXTENDS)_CC)) |
| $$(call SetIfEmpty, $1_CXX, $$($$($1_EXTENDS)_CXX)) |
| $$(call SetIfEmpty, $1_LD, $$($$($1_EXTENDS)_LD)) |
| $$(call SetIfEmpty, $1_AR, $$($$($1_EXTENDS)_AR)) |
| $$(call SetIfEmpty, $1_AS, $$($$($1_EXTENDS)_AS)) |
| $$(call SetIfEmpty, $1_MT, $$($$($1_EXTENDS)_MT)) |
| $$(call SetIfEmpty, $1_RC, $$($$($1_EXTENDS)_RC)) |
| $$(call SetIfEmpty, $1_OBJCOPY, $$($$($1_EXTENDS)_OBJCOPY)) |
| $$(call SetIfEmpty, $1_STRIP, $$($$($1_EXTENDS)_STRIP)) |
| $$(call SetIfEmpty, $1_SYSROOT_CFLAGS, $$($$($1_EXTENDS)_SYSROOT_CFLAGS)) |
| $$(call SetIfEmpty, $1_SYSROOT_LDFLAGS, $$($$($1_EXTENDS)_SYSROOT_LDFLAGS)) |
| endif |
| endef |
| |
| # Create a default toolchain with the main compiler and linker |
| $(eval $(call DefineNativeToolchain, TOOLCHAIN_DEFAULT, \ |
| CC := $(CC), \ |
| CXX := $(CXX), \ |
| LD := $(LD), \ |
| AR := $(AR), \ |
| AS := $(AS), \ |
| MT := $(MT), \ |
| RC := $(RC), \ |
| OBJCOPY := $(OBJCOPY), \ |
| STRIP := $(STRIP), \ |
| SYSROOT_CFLAGS := $(SYSROOT_CFLAGS), \ |
| SYSROOT_LDFLAGS := $(SYSROOT_LDFLAGS), \ |
| )) |
| |
| # Create a toolchain where linking is done with the C++ linker |
| $(eval $(call DefineNativeToolchain, TOOLCHAIN_LINK_CXX, \ |
| EXTENDS := TOOLCHAIN_DEFAULT, \ |
| LD := $(LDCXX), \ |
| )) |
| |
| # Create a toolchain with the BUILD compiler, used for build tools that |
| # are to be run during the build. |
| $(eval $(call DefineNativeToolchain, TOOLCHAIN_BUILD, \ |
| CC := $(BUILD_CC), \ |
| CXX := $(BUILD_CXX), \ |
| LD := $(BUILD_LD), \ |
| AR := $(BUILD_AR), \ |
| AS := $(BUILD_AS), \ |
| OBJCOPY := $(BUILD_OBJCOPY), \ |
| STRIP := $(BUILD_STRIP), \ |
| SYSROOT_CFLAGS := $(BUILD_SYSROOT_CFLAGS), \ |
| SYSROOT_LDFLAGS := $(BUILD_SYSROOT_LDFLAGS), \ |
| )) |
| |
| # BUILD toolchain with the C++ linker |
| $(eval $(call DefineNativeToolchain, TOOLCHAIN_BUILD_LINK_CXX, \ |
| EXTENDS := TOOLCHAIN_BUILD, \ |
| LD := $(BUILD_LDCXX), \ |
| )) |
| |
| ################################################################################ |
| |
| # Extensions of files handled by this macro. |
| NATIVE_SOURCE_EXTENSIONS := %.s %.S %.c %.cpp %.cc %.m %.mm |
| |
| # Replaces native source extensions with the object file extension in a string. |
| # Param 1: the string containing source file names with extensions |
| # The surrounding strip is needed to keep additional whitespace out |
| define replace_with_obj_extension |
| $(strip \ |
| $(foreach extension, $(NATIVE_SOURCE_EXTENSIONS), \ |
| $(patsubst $(extension),%$(OBJ_SUFFIX), $(filter $(extension), $1))) \ |
| ) |
| endef |
| |
| # This pattern is used to transform the output of the microsoft CL compiler |
| # into a make syntax dependency file (.d) |
| WINDOWS_SHOWINCLUDE_SED_PATTERN := \ |
| -e '/^Note: including file:/!d' \ |
| -e 's|Note: including file: *||' \ |
| -e 's|\r||g' \ |
| -e 's|\\|/|g' \ |
| -e 's|^\([a-zA-Z]\):|$(WINENV_PREFIX)/\1|g' \ |
| -e '\|$(TOPDIR)|I !d' \ |
| -e 's|$$$$| \\|g' \ |
| # |
| |
| # This pattern is used to transform a dependency file (.d) to a list |
| # of make targets for dependent files (.d.targets) |
| DEPENDENCY_TARGET_SED_PATTERN := \ |
| -e 's/\#.*//' \ |
| -e 's/^[^:]*: *//' \ |
| -e 's/ *\\$$$$//' \ |
| -e 's/^[ ]*//' \ |
| -e '/^$$$$/ d' \ |
| -e 's/$$$$/ :/' \ |
| # |
| |
| ################################################################################ |
| # When absolute paths are not allowed in the output, and the compiler does not |
| # support any options to avoid it, we need to rewrite compile commands to use |
| # relative paths. By doing this, the __FILE__ macro will resolve to relative |
| # paths. The relevant input paths on the command line are the -I flags and the |
| # path to the source file itself. |
| # |
| # The macro MakeCommandRelative is used to rewrite the command line like this: |
| # 'CD $(WORKSPACE_ROOT) && <cmd>' |
| # and changes all paths in cmd to be relative to the workspace root. This only |
| # works properly if the build dir is inside the workspace root. If it's not, |
| # relative paths are still calculated, but depending on the distance between the |
| # dirs, paths in the build dir may end up as essentially absolute anyway. |
| # |
| # The fix-deps-file macro is used to adjust the contents of the generated make |
| # dependency files to contain paths compatible with make. |
| # |
| ifeq ($(ALLOW_ABSOLUTE_PATHS_IN_OUTPUT)-$(FILE_MACRO_CFLAGS), false-) |
| # Need to handle -I flags as both '-Ifoo' and '-I foo'. |
| MakeCommandRelative = \ |
| $(CD) $(WORKSPACE_ROOT) && \ |
| $(foreach o, $1, \ |
| $(if $(filter $(WORKSPACE_ROOT)/% $(OUTPUTDIR)/%, $o), \ |
| $(call RelativePath, $o, $(WORKSPACE_ROOT)) \ |
| , \ |
| $(if $(filter -I$(WORKSPACE_ROOT)/%, $o), \ |
| -I$(call RelativePath, $(patsubst -I%, %, $o), $(WORKSPACE_ROOT)) \ |
| , \ |
| $o \ |
| ) \ |
| ) \ |
| ) |
| |
| # When compiling with relative paths, the deps file may come out with relative |
| # paths, and that path may start with './'. First remove any leading ./, then |
| # add WORKSPACE_ROOT to any line not starting with /, while allowing for |
| # leading spaces. There may also be multiple entries on the same line, so start |
| # with splitting such lines. |
| # Non GNU sed (BSD on macosx) cannot substitue in literal \n using regex. |
| # Instead use a bash escaped literal newline. To avoid having unmatched quotes |
| # ruin the ability for an editor to properly syntax highlight this file, define |
| # that newline sequence as a separate variable and add the closing quote behind |
| # a comment. |
| sed_newline := \'$$'\n''#' |
| ifeq ($(TOOLCHAIN_TYPE), solstudio) |
| define fix-deps-file |
| $(SED) -e 's|\./|$(WORKSPACE_ROOT)/|g' $1.tmp > $1 |
| endef |
| else |
| define fix-deps-file |
| $(SED) \ |
| -e 's|\([^ ]\) \{1,\}\([^\\:]\)|\1 \\$(sed_newline) \2|g' \ |
| $1.tmp \ |
| | $(SED) \ |
| -e 's|^\([ ]*\)\./|\1|' \ |
| -e '/^[ ]*[^/ ]/s|^\([ ]*\)|\1$(WORKSPACE_ROOT)/|' \ |
| > $1 |
| endef |
| endif |
| else |
| # By default the MakeCommandRelative macro does nothing. |
| MakeCommandRelative = $1 |
| |
| # Even with absolute paths on the command line, the Solaris studio compiler |
| # doesn't output the full path to the object file in the generated deps files. |
| # For other toolchains, no adjustment is needed. |
| ifeq ($(TOOLCHAIN_TYPE), solstudio) |
| define fix-deps-file |
| $(SED) 's|^$$(@F):|$$@:|' $1.tmp > $1 |
| endef |
| else |
| define fix-deps-file |
| $(MV) $1.tmp $1 |
| endef |
| endif |
| endif |
| |
| ################################################################################ |
| # GetEntitlementsFile |
| # Find entitlements file for executable when signing on macosx. If no |
| # specialized file is found, returns the default file. |
| # $1 Executable to find entitlements file for. |
| ENTITLEMENTS_DIR := $(TOPDIR)/make/data/macosxsigning |
| ifeq ($(MACOSX_CODESIGN_MODE), debug) |
| CODESIGN_PLIST_SUFFIX := -debug |
| else |
| CODESIGN_PLIST_SUFFIX := |
| endif |
| DEFAULT_ENTITLEMENTS_FILE := $(ENTITLEMENTS_DIR)/default$(CODESIGN_PLIST_SUFFIX).plist |
| |
| GetEntitlementsFile = \ |
| $(foreach f, $(ENTITLEMENTS_DIR)/$(strip $(notdir $1))$(CODESIGN_PLIST_SUFFIX).plist, \ |
| $(if $(wildcard $f), $f, $(DEFAULT_ENTITLEMENTS_FILE)) \ |
| ) |
| |
| ################################################################################ |
| # Create the recipe needed to compile a single native source file. |
| # |
| # Parameter 1 is the name of the rule, based on the name of the library/ |
| # program being build and the name of the source code file, e.g. |
| # BUILD_LIBFOO_fooMain.cpp. |
| # |
| # Remaining parameters are named arguments: |
| # FILE - The full path of the source file to compiler |
| # BASE - The name of the rule for the entire binary to build ($1) |
| # |
| SetupCompileNativeFile = $(NamedParamsMacroTemplate) |
| define SetupCompileNativeFileBody |
| $1_FILENAME := $$(notdir $$($1_FILE)) |
| |
| # The target file to be generated. |
| $1_OBJ := $$($$($1_BASE)_OBJECT_DIR)/$$(call replace_with_obj_extension, \ |
| $$($1_FILENAME)) |
| |
| # Generate the corresponding compile_commands.json fragment. |
| $1_OBJ_JSON = $$(MAKESUPPORT_OUTPUTDIR)/compile-commands/$$(subst /,_,$$(subst \ |
| $$(OUTPUTDIR)/,,$$($1_OBJ))).json |
| $$($1_BASE)_ALL_OBJS_JSON += $$($1_OBJ_JSON) |
| |
| # Only continue if this object file hasn't been processed already. This lets |
| # the first found source file override any other with the same name. |
| ifeq ($$($1_OBJ_PROCESSED), ) |
| $1_OBJ_PROCESSED := true |
| # This is the definite source file to use for $1_FILENAME. |
| $1_SRC_FILE := $$($1_FILE) |
| |
| ifeq ($$($1_OPTIMIZATION), ) |
| $1_OPT_CFLAGS := $$($$($1_BASE)_OPT_CFLAGS) |
| $1_OPT_CXXFLAGS := $$($$($1_BASE)_OPT_CXXFLAGS) |
| else |
| ifeq ($$($1_OPTIMIZATION), NONE) |
| $1_OPT_CFLAGS := $(C_O_FLAG_NONE) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_NONE) |
| else ifeq ($$($1_OPTIMIZATION), LOW) |
| $1_OPT_CFLAGS := $(C_O_FLAG_NORM) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_NORM) |
| else ifeq ($$($1_OPTIMIZATION), HIGH) |
| $1_OPT_CFLAGS := $(C_O_FLAG_HI) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HI) |
| else ifeq ($$($1_OPTIMIZATION), HIGHEST) |
| $1_OPT_CFLAGS := $(C_O_FLAG_HIGHEST) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HIGHEST) |
| else ifeq ($$($1_OPTIMIZATION), HIGHEST_JVM) |
| $1_OPT_CFLAGS := $(C_O_FLAG_HIGHEST_JVM) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HIGHEST_JVM) |
| else ifeq ($$($1_OPTIMIZATION), SIZE) |
| $1_OPT_CFLAGS := $(C_O_FLAG_SIZE) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_SIZE) |
| else |
| $$(error Unknown value for file OPTIMIZATION: $$($1_OPTIMIZATION)) |
| endif |
| endif |
| |
| ifneq ($$($$($1_BASE)_PRECOMPILED_HEADER), ) |
| ifeq ($$(filter $$($1_FILENAME), $$($$($1_BASE)_PRECOMPILED_HEADER_EXCLUDE)), ) |
| $1_USE_PCH_FLAGS := $$($$($1_BASE)_USE_PCH_FLAGS) |
| endif |
| endif |
| |
| ifneq ($(DISABLE_WARNING_PREFIX), ) |
| $1_WARNINGS_FLAGS := $$(addprefix $(DISABLE_WARNING_PREFIX), \ |
| $$($$($1_BASE)_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)_$$($1_FILENAME))) |
| endif |
| |
| $1_BASE_CFLAGS := $$($$($1_BASE)_CFLAGS) $$($$($1_BASE)_EXTRA_CFLAGS) \ |
| $$($$($1_BASE)_SYSROOT_CFLAGS) $$($1_WARNINGS_FLAGS) |
| $1_BASE_CXXFLAGS := $$($$($1_BASE)_CXXFLAGS) $$($$($1_BASE)_EXTRA_CXXFLAGS) \ |
| $$($$($1_BASE)_SYSROOT_CFLAGS) $$($1_EXTRA_CXXFLAGS) $$($1_WARNINGS_FLAGS) |
| $1_BASE_ASFLAGS := $$($$($1_BASE)_ASFLAGS) $$($$($1_BASE)_EXTRA_ASFLAGS) |
| |
| ifneq ($$(filter %.c, $$($1_FILENAME)), ) |
| # Compile as a C file |
| $1_FLAGS := $(CFLAGS_CCACHE) $$($1_USE_PCH_FLAGS) $$($1_BASE_CFLAGS) \ |
| $$($1_OPT_CFLAGS) $$($1_CFLAGS) -c |
| $1_COMPILER := $$($$($1_BASE)_CC) |
| $1_DEP_FLAG := $(C_FLAG_DEPS) |
| else ifneq ($$(filter %.m, $$($1_FILENAME)), ) |
| # Compile as an Objective-C file |
| $1_FLAGS := -x objective-c $(CFLAGS_CCACHE) $$($1_USE_PCH_FLAGS) \ |
| $$($1_BASE_CFLAGS) $$($1_OPT_CFLAGS) $$($1_CFLAGS) -c |
| $1_COMPILER := $$($$($1_BASE)_CC) |
| $1_DEP_FLAG := $(C_FLAG_DEPS) |
| else ifneq ($$(filter %.s %.S, $$($1_FILENAME)), ) |
| # Compile as assembler file |
| $1_FLAGS := $$($1_BASE_ASFLAGS) |
| $1_COMPILER := $(AS) |
| $1_DEP_FLAG := |
| else ifneq ($$(filter %.cpp %.cc %.mm, $$($1_FILENAME)), ) |
| # Compile as a C++ or Objective-C++ file |
| $1_FLAGS := $(CFLAGS_CCACHE) $$($1_USE_PCH_FLAGS) $$($1_BASE_CXXFLAGS) \ |
| $$($1_OPT_CXXFLAGS) $$($1_CXXFLAGS) -c |
| $1_COMPILER := $$($$($1_BASE)_CXX) |
| $1_DEP_FLAG := $(CXX_FLAG_DEPS) |
| else |
| $$(error Internal error in NativeCompilation.gmk: no compiler for file $$($1_FILENAME)) |
| endif |
| |
| ifeq ($$(filter %.s %.S, $$($1_FILENAME)), ) |
| # And this is the dependency file for this obj file. |
| $1_DEPS_FILE := $$(patsubst %$(OBJ_SUFFIX),%.d,$$($1_OBJ)) |
| # The dependency target file lists all dependencies as empty targets to |
| # avoid make error "No rule to make target" for removed files |
| $1_DEPS_TARGETS_FILE := $$(patsubst %$(OBJ_SUFFIX),%.d.targets,$$($1_OBJ)) |
| |
| # Only try to load individual dependency information files if the global |
| # file hasn't been loaded (could happen if make was interrupted). |
| ifneq ($$($$($1_BASE)_DEPS_FILE_LOADED), true) |
| # Include previously generated dependency information. (if it exists) |
| -include $$($1_DEPS_FILE) |
| -include $$($1_DEPS_TARGETS_FILE) |
| endif |
| endif |
| |
| ifneq ($$(strip $$($1_CFLAGS) $$($1_CXXFLAGS) $$($1_OPTIMIZATION)), ) |
| $1_VARDEPS := $$($1_CFLAGS) $$($1_CXXFLAGS) $$($1_OPTIMIZATION) |
| $1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, $$($1_OBJ).vardeps) |
| endif |
| |
| $1_OBJ_DEPS := $$($1_SRC_FILE) $$($$($1_BASE)_COMPILE_VARDEPS_FILE) \ |
| $$($$($1_BASE)_EXTRA_DEPS) $$($1_VARDEPS_FILE) |
| $1_COMPILE_OPTIONS := $$($1_FLAGS) $(CC_OUT_OPTION)$$($1_OBJ) $$($1_SRC_FILE) |
| |
| $$($1_OBJ_JSON): $$($1_OBJ_DEPS) |
| $$(call WriteCompileCommandsFragment, $$@, $$(PWD), $$($1_SRC_FILE), \ |
| $$($1_COMPILER) $$($1_COMPILE_OPTIONS), $$($1_OBJ)) |
| |
| $$($1_OBJ): $$($1_OBJ_DEPS) | $$($$($1_BASE)_BUILD_INFO) |
| $$(call LogInfo, Compiling $$($1_FILENAME) (for $$($$($1_BASE)_BASENAME))) |
| $$(call MakeDir, $$(@D)) |
| ifneq ($(TOOLCHAIN_TYPE), microsoft) |
| $$(call ExecuteWithLog, $$@, $$(call MakeCommandRelative, \ |
| $$($1_COMPILER) $$($1_DEP_FLAG) \ |
| $$(addsuffix .tmp, $$($1_DEPS_FILE)) \ |
| $$($1_COMPILE_OPTIONS))) |
| ifneq ($$($1_DEPS_FILE), ) |
| $$(call fix-deps-file, $$($1_DEPS_FILE)) |
| # Create a dependency target file from the dependency file. |
| # Solution suggested by: |
| # http://make.mad-scientist.net/papers/advanced-auto-dependency-generation/ |
| $(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_DEPS_FILE) \ |
| > $$($1_DEPS_TARGETS_FILE) |
| endif |
| else |
| # The Visual Studio compiler lacks a feature for generating make |
| # dependencies, but by setting -showIncludes, all included files are |
| # printed. These are filtered out and parsed into make dependences. |
| # |
| # Keep as much as possible on one execution line for best performance |
| # on Windows. No need to save exit code from compilation since |
| # pipefail is always active on Windows. |
| $$(call ExecuteWithLog, $$@, $$(call MakeCommandRelative, \ |
| $$($1_COMPILER) -showIncludes $$($1_COMPILE_OPTIONS))) \ |
| | $(TR) -d '\r' | $(GREP) -v -e "^Note: including file:" \ |
| -e "^$$($1_FILENAME)$$$$" || test "$$$$?" = "1" ; \ |
| $(ECHO) $$@: \\ > $$($1_DEPS_FILE) ; \ |
| $(SED) $(WINDOWS_SHOWINCLUDE_SED_PATTERN) $$($1_OBJ).log \ |
| | $(SORT) -u >> $$($1_DEPS_FILE) ; \ |
| $(ECHO) >> $$($1_DEPS_FILE) ; \ |
| $(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_DEPS_FILE) > $$($1_DEPS_TARGETS_FILE) |
| endif |
| endif |
| endef |
| |
| # Setup make rules for creating a native binary (a shared library or an |
| # executable). |
| # |
| # Parameter 1 is the name of the rule. This name is used as variable prefix, |
| # and the targets generated are listed in a variable by that name. |
| # |
| # Remaining parameters are named arguments. These include: |
| # NAME The base name for the resulting binary, excluding decorations (like *.exe) |
| # TYPE Type of binary (EXECUTABLE, LIBRARY or STATIC_LIBRARY). Default is LIBRARY. |
| # SUFFIX Override the default suffix for the output file |
| # TOOLCHAIN Name of toolchain setup to use. Defaults to TOOLCHAIN_DEFAULT. |
| # SRC one or more directory roots to scan for C/C++ files. |
| # CFLAGS the compiler flags to be used, used both for C and C++. |
| # CXXFLAGS the compiler flags to be used for c++, if set overrides CFLAGS. |
| # LDFLAGS the linker flags to be used, used both for C and C++. |
| # LIBS the libraries to link to |
| # ARFLAGS the archiver flags to be used |
| # OBJECT_DIR the directory where we store the object files |
| # OUTPUT_DIR the directory where the resulting binary is put |
| # INCLUDES only pick source from these directories |
| # EXCLUDES do not pick source from these directories |
| # INCLUDE_FILES only compile exactly these files! |
| # EXCLUDE_FILES with these names |
| # EXCLUDE_PATTERN exclude files matching any of these substrings |
| # EXTRA_FILES List of extra files not in any of the SRC dirs |
| # EXTRA_OBJECT_FILES List of extra object files to include when linking |
| # EXTRA_DEPS List of extra dependencies to be added to each compiled file |
| # VERSIONINFO_RESOURCE Input file for RC. Setting this implies that RC will be run |
| # RC_FLAGS flags for RC. |
| # EMBED_MANIFEST if true, embed manifest on Windows. |
| # MAPFILE mapfile |
| # REORDER reorder file |
| # USE_MAPFILE_FOR_SYMBOLS if true and this is a STATIC_BUILD, just copy the |
| # mapfile for the output symbols file |
| # CC the compiler to use, default is $(CC) |
| # LD the linker to use, default is $(LD) |
| # OPTIMIZATION sets optimization level to NONE, LOW, HIGH, HIGHEST, HIGHEST_JVM, SIZE |
| # DISABLED_WARNINGS_<toolchain> Disable the given warnings for the specified toolchain |
| # DISABLED_WARNINGS_C_<toolchain> Disable the given warnings for the specified toolchain |
| # when compiling C code |
| # DISABLED_WARNINGS_CXX_<toolchain> Disable the given warnings for the specified |
| # toolchain when compiling C++ code |
| # STRIP_SYMBOLS Set to false to override global strip policy and always leave |
| # symbols in the binary, if the toolchain allows for it |
| # DEBUG_SYMBOLS Set to false to disable generation of debug symbols |
| # COPY_DEBUG_SYMBOLS Set to false to override global setting of debug symbol copying |
| # ZIP_EXTERNAL_DEBUG_SYMBOLS Set to false to override global setting of debug symbol |
| # zipping |
| # STRIPFLAGS Optionally change the flags given to the strip command |
| # PRECOMPILED_HEADER Header file to use as precompiled header |
| # PRECOMPILED_HEADER_EXCLUDE List of source files that should not use PCH |
| # |
| # After being called, some variables are exported from this macro, all prefixed |
| # with parameter 1 followed by a '_': |
| # TARGET The library or executable created by the macro |
| # TARGET_DEPS All prerequisites for the target calculated by the macro |
| # ALL_OBJS All object files |
| # IMPORT_LIBRARY The import library created for a shared library on Windows |
| SetupNativeCompilation = $(NamedParamsMacroTemplate) |
| define SetupNativeCompilationBody |
| |
| # If type is unspecified, default to LIBRARY |
| ifeq ($$($1_TYPE), ) |
| $1_TYPE := LIBRARY |
| endif |
| |
| # If we're doing a static build and producing a library |
| # force it to be a static library and remove the -l libraries |
| ifeq ($(STATIC_BUILD), true) |
| ifeq ($$($1_TYPE), LIBRARY) |
| $1_TYPE := STATIC_LIBRARY |
| endif |
| endif |
| |
| $$(call SetIfEmpty, $1_COMPILE_WITH_DEBUG_SYMBOLS, $$(COMPILE_WITH_DEBUG_SYMBOLS)) |
| |
| # STATIC_LIBS is set from Main.gmk when building static versions of certain |
| # native libraries. |
| ifeq ($(STATIC_LIBS), true) |
| $1_TYPE := STATIC_LIBRARY |
| # The static versions need to be redirected to different output dirs, both |
| # to not interfere with the main build as well as to not end up inside the |
| # jmods. |
| $1_OBJECT_DIR := $$($1_OBJECT_DIR)/static |
| $1_OUTPUT_DIR := $$($1_OBJECT_DIR) |
| # For release builds where debug symbols are configured to be moved to |
| # separate debuginfo files, disable debug symbols for static libs instead. |
| # We don't currently support this configuration and we don't want symbol |
| # information in release builds unless explicitly asked to provide it. |
| ifeq ($(DEBUG_LEVEL), release) |
| ifeq ($(COPY_DEBUG_SYMBOLS), true) |
| $1_COMPILE_WITH_DEBUG_SYMBOLS := false |
| endif |
| endif |
| endif |
| |
| ifeq ($$($1_TYPE), EXECUTABLE) |
| $1_PREFIX := |
| ifeq ($$($1_SUFFIX), ) |
| $1_SUFFIX := $(EXECUTABLE_SUFFIX) |
| endif |
| else |
| $1_PREFIX := $(LIBRARY_PREFIX) |
| ifeq ($$($1_TYPE), LIBRARY) |
| ifeq ($$($1_SUFFIX), ) |
| $1_SUFFIX := $(SHARED_LIBRARY_SUFFIX) |
| endif |
| else ifeq ($$($1_TYPE), STATIC_LIBRARY) |
| ifeq ($$($1_SUFFIX), ) |
| $1_SUFFIX := $(STATIC_LIBRARY_SUFFIX) |
| endif |
| endif |
| endif |
| |
| ifneq ($$($1_NAME), $(basename $$($1_NAME))) |
| $$(error NAME must not contain any directory path in $1) |
| endif |
| ifneq ($(findstring $$($1_SUFFIX), $$($1_NAME)), ) |
| $$(error NAME should be specified without suffix: $$($1_SUFFIX) in $1) |
| endif |
| ifneq ($(findstring $$($1_PREFIX), $$($1_NAME)), ) |
| $$(error NAME should be specified without prefix: $$($1_PREFIX) in $1) |
| endif |
| ifeq ($$($1_OUTPUT_DIR), ) |
| $$(error OUTPUT_DIR is missing in $1) |
| endif |
| ifneq ($$($1_MANIFEST), ) |
| ifeq ($$($1_MANIFEST_VERSION), ) |
| $$(error If MANIFEST is provided, then MANIFEST_VERSION is required in $1) |
| endif |
| endif |
| |
| $1_BASENAME := $$($1_PREFIX)$$($1_NAME)$$($1_SUFFIX) |
| $1_TARGET := $$($1_OUTPUT_DIR)/$$($1_BASENAME) |
| $1_NOSUFFIX := $$($1_PREFIX)$$($1_NAME) |
| $1_SAFE_NAME := $$(strip $$(subst /,_, $1)) |
| |
| # Need to make sure TARGET is first on list |
| $1 := $$($1_TARGET) |
| |
| # Setup the toolchain to be used |
| $$(call SetIfEmpty, $1_TOOLCHAIN, TOOLCHAIN_DEFAULT) |
| $$(call SetIfEmpty, $1_CC, $$($$($1_TOOLCHAIN)_CC)) |
| $$(call SetIfEmpty, $1_CXX, $$($$($1_TOOLCHAIN)_CXX)) |
| $$(call SetIfEmpty, $1_LD, $$($$($1_TOOLCHAIN)_LD)) |
| $$(call SetIfEmpty, $1_AR, $$($$($1_TOOLCHAIN)_AR)) |
| $$(call SetIfEmpty, $1_AS, $$($$($1_TOOLCHAIN)_AS)) |
| $$(call SetIfEmpty, $1_MT, $$($$($1_TOOLCHAIN)_MT)) |
| $$(call SetIfEmpty, $1_RC, $$($$($1_TOOLCHAIN)_RC)) |
| $$(call SetIfEmpty, $1_OBJCOPY, $$($$($1_TOOLCHAIN)_OBJCOPY)) |
| $$(call SetIfEmpty, $1_STRIP, $$($$($1_TOOLCHAIN)_STRIP)) |
| $$(call SetIfEmpty, $1_SYSROOT_CFLAGS, $$($$($1_TOOLCHAIN)_SYSROOT_CFLAGS)) |
| $$(call SetIfEmpty, $1_SYSROOT_LDFLAGS, $$($$($1_TOOLCHAIN)_SYSROOT_LDFLAGS)) |
| |
| # Make sure the dirs exist. |
| $$(call MakeDir, $$($1_OBJECT_DIR) $$($1_OUTPUT_DIR)) |
| $$(foreach d, $$($1_SRC), $$(if $$(wildcard $$d), , \ |
| $$(error SRC specified to SetupNativeCompilation $1 contains missing directory $$d))) |
| |
| # Find all files in the source trees. Preserve order. |
| $1_SRCS := $$(foreach s, $$($1_SRC), $$(call FindFiles, $$(s))) |
| $1_SRCS := $$(filter $$(NATIVE_SOURCE_EXTENSIONS), $$($1_SRCS)) |
| # Extract the C/C++ files. |
| ifneq ($$($1_EXCLUDE_PATTERNS), ) |
| # We must not match the exclude pattern against the src root(s). |
| $1_SRCS_WITHOUT_ROOTS := $$($1_SRCS) |
| $$(foreach i, $$($1_SRC), $$(eval $1_SRCS_WITHOUT_ROOTS := $$(patsubst \ |
| $$i/%,%, $$($1_SRCS_WITHOUT_ROOTS)))) |
| $1_ALL_EXCLUDE_FILES := $$(call containing, $$($1_EXCLUDE_PATTERNS), \ |
| $$($1_SRCS_WITHOUT_ROOTS)) |
| endif |
| ifneq ($$($1_EXCLUDE_FILES), ) |
| $1_ALL_EXCLUDE_FILES += $$($1_EXCLUDE_FILES) |
| endif |
| ifneq ($$($1_ALL_EXCLUDE_FILES), ) |
| $1_EXCLUDE_FILES_PAT := $$($1_ALL_EXCLUDE_FILES) \ |
| $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$($1_ALL_EXCLUDE_FILES))) |
| $1_EXCLUDE_FILES_PAT := $$(addprefix %, $$($1_EXCLUDE_FILES_PAT)) |
| $1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES_PAT), $$($1_SRCS)) |
| endif |
| ifneq ($$($1_INCLUDE_FILES), ) |
| $1_INCLUDE_FILES_PAT := $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$($1_INCLUDE_FILES))) |
| $1_SRCS := $$(filter $$($1_INCLUDE_FILES_PAT), $$($1_SRCS)) |
| endif |
| # There can be only a single bin dir root, no need to foreach over the roots. |
| $1_BINS := $$(wildcard $$($1_OBJECT_DIR)/*$(OBJ_SUFFIX)) |
| # Now we have a list of all c/c++ files to compile: $$($1_SRCS) |
| # and we have a list of all existing object files: $$($1_BINS) |
| |
| # Prepend the source/bin path to the filter expressions. Then do the filtering. |
| ifneq ($$($1_INCLUDES), ) |
| $1_SRC_INCLUDES := $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$(addsuffix /%, $$($1_INCLUDES)))) |
| $1_SRCS := $$(filter $$($1_SRC_INCLUDES), $$($1_SRCS)) |
| endif |
| ifneq ($$($1_EXCLUDES), ) |
| $1_SRC_EXCLUDES := $$(addsuffix /%, $$($1_EXCLUDES)) |
| $1_SRC_EXCLUDES += $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$(addsuffix /%, $$($1_EXCLUDES)))) |
| $1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES), $$($1_SRCS)) |
| endif |
| |
| $1_SRCS += $$($1_EXTRA_FILES) |
| |
| ifeq ($$($1_SRCS), ) |
| $$(error No sources found for $1 when looking inside the dirs $$($1_SRC)) |
| endif |
| |
| # Calculate the expected output from compiling the sources |
| $1_EXPECTED_OBJS_FILENAMES := $$(call replace_with_obj_extension, $$(notdir $$($1_SRCS))) |
| $1_EXPECTED_OBJS := $$(addprefix $$($1_OBJECT_DIR)/, $$($1_EXPECTED_OBJS_FILENAMES)) |
| # Are there too many object files on disk? Perhaps because some source file was removed? |
| $1_SUPERFLOUS_OBJS := $$(sort $$(filter-out $$($1_EXPECTED_OBJS), $$($1_BINS))) |
| # Clean out the superfluous object files. |
| ifneq ($$($1_SUPERFLUOUS_OBJS), ) |
| $$(shell $(RM) -f $$($1_SUPERFLUOUS_OBJS)) |
| endif |
| # Sort to remove dupliates and provide a reproducable order on the input files to the linker. |
| $1_ALL_OBJS := $$(sort $$($1_EXPECTED_OBJS) $$($1_EXTRA_OBJECT_FILES)) |
| |
| # Pickup extra OPENJDK_TARGET_OS_TYPE, OPENJDK_TARGET_OS, and/or OPENJDK_TARGET_OS plus |
| # OPENJDK_TARGET_CPU pair dependent variables for CFLAGS. |
| $1_EXTRA_CFLAGS := $$($1_CFLAGS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_CFLAGS_$(OPENJDK_TARGET_OS)) \ |
| $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_$(OPENJDK_TARGET_CPU)) |
| ifneq ($(DEBUG_LEVEL), release) |
| # Pickup extra debug dependent variables for CFLAGS |
| $1_EXTRA_CFLAGS += $$($1_CFLAGS_debug) |
| $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS_TYPE)_debug) |
| $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_debug) |
| $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_$(OPENJDK_TARGET_CPU)_debug) |
| else |
| $1_EXTRA_CFLAGS += $$($1_CFLAGS_release) |
| $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS_TYPE)_release) |
| $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_release) |
| $1_EXTRA_CFLAGS += $$($1_CFLAGS_$(OPENJDK_TARGET_OS)_$(OPENJDK_TARGET_CPU)_release) |
| endif |
| ifeq ($(STATIC_LIBS), true) |
| $1_EXTRA_CFLAGS += $$(STATIC_LIBS_CFLAGS) |
| endif |
| |
| # Pickup extra OPENJDK_TARGET_OS_TYPE and/or OPENJDK_TARGET_OS dependent variables for CXXFLAGS. |
| $1_EXTRA_CXXFLAGS := $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)) |
| ifneq ($(DEBUG_LEVEL), release) |
| # Pickup extra debug dependent variables for CXXFLAGS |
| $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_debug) |
| $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)_debug) |
| $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_debug) |
| else |
| $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_release) |
| $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_TYPE)_release) |
| $1_EXTRA_CXXFLAGS += $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_release) |
| endif |
| ifeq ($(STATIC_LIBS), true) |
| $1_EXTRA_CXXFLAGS += $$(STATIC_LIB_CFLAGS) |
| endif |
| |
| # If no C++ flags are explicitly set, default to using the C flags. |
| # After that, we can set additional C++ flags that should not interfere |
| # with the mechanism for copying the C flags by default. |
| ifeq ($$($1_CXXFLAGS), ) |
| $1_CXXFLAGS := $$($1_CFLAGS) |
| endif |
| ifeq ($$(strip $$($1_EXTRA_CXXFLAGS)), ) |
| $1_EXTRA_CXXFLAGS := $$($1_EXTRA_CFLAGS) |
| endif |
| |
| ifeq ($$($1_COMPILE_WITH_DEBUG_SYMBOLS), true) |
| $1_EXTRA_CFLAGS += $$(CFLAGS_DEBUG_SYMBOLS) |
| $1_EXTRA_CXXFLAGS += $$(CFLAGS_DEBUG_SYMBOLS) |
| $1_EXTRA_ASFLAGS += $$(ASFLAGS_DEBUG_SYMBOLS) |
| endif |
| |
| ifneq ($$($1_REORDER), ) |
| $1_EXTRA_CFLAGS += $$(C_FLAG_REORDER) |
| $1_EXTRA_CXXFLAGS += $$(C_FLAG_REORDER) |
| endif |
| |
| # Pass the library name for static JNI library naming |
| ifeq ($$($1_TYPE), STATIC_LIBRARY) |
| $1_EXTRA_CFLAGS += -DLIBRARY_NAME=$$($1_NAME) |
| $1_EXTRA_CXXFLAGS += -DLIBRARY_NAME=$$($1_NAME) |
| endif |
| |
| # Pick up disabled warnings, if possible on this platform. |
| ifneq ($(DISABLE_WARNING_PREFIX), ) |
| $1_EXTRA_CFLAGS += $$(addprefix $(DISABLE_WARNING_PREFIX), \ |
| $$(DISABLED_WARNINGS) \ |
| $$(DISABLED_WARNINGS_C) \ |
| $$($1_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)) \ |
| $$($1_DISABLED_WARNINGS_C_$(TOOLCHAIN_TYPE))) |
| $1_EXTRA_CXXFLAGS += $$(addprefix $(DISABLE_WARNING_PREFIX), \ |
| $$(DISABLED_WARNINGS) \ |
| $$(DISABLED_WARNINGS_CXX) \ |
| $$($1_DISABLED_WARNINGS_$(TOOLCHAIN_TYPE)) \ |
| $$($1_DISABLED_WARNINGS_CXX_$(TOOLCHAIN_TYPE))) |
| endif |
| |
| # Check if warnings should be considered errors. |
| # Pick first binary and toolchain specific, then binary specific, then general setting. |
| ifeq ($$($1_WARNINGS_AS_ERRORS_$(TOOLCHAIN_TYPE)), ) |
| ifeq ($$($1_WARNINGS_AS_ERRORS), ) |
| $1_WARNINGS_AS_ERRORS_$(TOOLCHAIN_TYPE) := $$(WARNINGS_AS_ERRORS) |
| else |
| $1_WARNINGS_AS_ERRORS_$(TOOLCHAIN_TYPE) := $$($1_WARNINGS_AS_ERRORS) |
| endif |
| endif |
| |
| ifeq ($$($1_WARNINGS_AS_ERRORS_$(TOOLCHAIN_TYPE)), true) |
| $1_EXTRA_CFLAGS += $(CFLAGS_WARNINGS_ARE_ERRORS) |
| $1_EXTRA_CXXFLAGS += $(CFLAGS_WARNINGS_ARE_ERRORS) |
| $1_EXTRA_LDFLAGS += $(LDFLAGS_WARNINGS_ARE_ERRORS) |
| endif |
| |
| ifeq (NONE, $$($1_OPTIMIZATION)) |
| $1_OPT_CFLAGS := $(C_O_FLAG_NONE) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_NONE) |
| else ifeq (LOW, $$($1_OPTIMIZATION)) |
| $1_OPT_CFLAGS := $(C_O_FLAG_NORM) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_NORM) |
| else ifeq (HIGH, $$($1_OPTIMIZATION)) |
| $1_OPT_CFLAGS := $(C_O_FLAG_HI) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HI) |
| else ifeq (HIGHEST, $$($1_OPTIMIZATION)) |
| $1_OPT_CFLAGS := $(C_O_FLAG_HIGHEST) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HIGHEST) |
| else ifeq (HIGHEST_JVM, $$($1_OPTIMIZATION)) |
| $1_OPT_CFLAGS := $(C_O_FLAG_HIGHEST_JVM) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_HIGHEST_JVM) |
| else ifeq (SIZE, $$($1_OPTIMIZATION)) |
| $1_OPT_CFLAGS := $(C_O_FLAG_SIZE) |
| $1_OPT_CXXFLAGS := $(CXX_O_FLAG_SIZE) |
| else ifneq (, $$($1_OPTIMIZATION)) |
| $$(error Unknown value for OPTIMIZATION: $$($1_OPTIMIZATION)) |
| endif |
| |
| $1_BUILD_INFO := $$($1_OBJECT_DIR)/_build-info.marker |
| |
| # Track variable changes for all variables that affect the compilation command |
| # lines for all object files in this setup. This includes at least all the |
| # variables used in the call to add_native_source below. |
| $1_COMPILE_VARDEPS := $$($1_CFLAGS) $$($1_EXTRA_CFLAGS) $$($1_SYSROOT_CFLAGS) \ |
| $$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS) $$($1_OPT_CFLAGS) $$($1_OPT_CXXFLAGS) \ |
| $$($1_CC) $$($1_CXX) $$($1_AS) $$($1_ASFLAGS) |
| $1_COMPILE_VARDEPS_FILE := $$(call DependOnVariable, $1_COMPILE_VARDEPS, \ |
| $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).comp.vardeps) |
| |
| ifneq ($$($1_PRECOMPILED_HEADER), ) |
| ifeq ($(USE_PRECOMPILED_HEADER), true) |
| ifeq ($(TOOLCHAIN_TYPE), microsoft) |
| $1_PCH_FILE := $$($1_OBJECT_DIR)/$1.pch |
| $1_GENERATED_PCH_SRC := $$($1_OBJECT_DIR)/$1_pch.cpp |
| $1_GENERATED_PCH_OBJ := $$($1_OBJECT_DIR)/$1_pch.obj |
| |
| $$(eval $$(call SetupCompileNativeFile, $1_$$(notdir $$($1_GENERATED_PCH_SRC)), \ |
| FILE := $$($1_GENERATED_PCH_SRC), \ |
| BASE := $1, \ |
| EXTRA_CXXFLAGS := -Fp$$($1_PCH_FILE) -Yc$$(notdir $$($1_PRECOMPILED_HEADER)), \ |
| )) |
| |
| $1_USE_PCH_FLAGS := \ |
| -Fp$$($1_PCH_FILE) -Yu$$(notdir $$($1_PRECOMPILED_HEADER)) |
| |
| $$($1_ALL_OBJS): $$($1_GENERATED_PCH_OBJ) |
| |
| # Explicitly add the pch obj file first to ease comparing to old |
| # hotspot build. |
| $1_ALL_OBJS := $$($1_GENERATED_PCH_OBJ) $$($1_ALL_OBJS) |
| |
| $$($1_GENERATED_PCH_SRC): |
| $(ECHO) "#include \"$$(notdir $$($1_PRECOMPILED_HEADER))\"" > $$@ |
| |
| else ifneq ($(findstring $(TOOLCHAIN_TYPE), gcc clang), ) |
| ifeq ($(TOOLCHAIN_TYPE), gcc) |
| $1_PCH_FILE := $$($1_OBJECT_DIR)/precompiled/$$(notdir $$($1_PRECOMPILED_HEADER)).gch |
| $1_USE_PCH_FLAGS := -I$$($1_OBJECT_DIR)/precompiled |
| else ifeq ($(TOOLCHAIN_TYPE), clang) |
| $1_PCH_FILE := $$($1_OBJECT_DIR)/precompiled/$$(notdir $$($1_PRECOMPILED_HEADER)).pch |
| $1_USE_PCH_FLAGS := -include-pch $$($1_PCH_FILE) |
| endif |
| $1_PCH_DEPS_FILE := $$($1_PCH_FILE).d |
| $1_PCH_DEPS_TARGETS_FILE := $$($1_PCH_FILE).d.targets |
| |
| -include $$($1_PCH_DEPS_FILE) |
| -include $$($1_PCH_DEPS_TARGETS_FILE) |
| |
| $1_PCH_COMMAND := $$($1_CC) $$($1_CFLAGS) $$($1_EXTRA_CFLAGS) $$($1_SYSROOT_CFLAGS) \ |
| $$($1_OPT_CFLAGS) -x c++-header -c $(C_FLAG_DEPS) \ |
| $$(addsuffix .tmp, $$($1_PCH_DEPS_FILE)) |
| |
| $$($1_PCH_FILE): $$($1_PRECOMPILED_HEADER) $$($1_COMPILE_VARDEPS_FILE) |
| $$(call LogInfo, Generating precompiled header) |
| $$(call MakeDir, $$(@D)) |
| $$(call ExecuteWithLog, $$@, $$(call MakeCommandRelative, \ |
| $$($1_PCH_COMMAND) $$< -o $$@)) |
| $$(call fix-deps-file, $$($1_PCH_DEPS_FILE)) |
| $(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_PCH_DEPS_FILE) \ |
| > $$($1_PCH_DEPS_TARGETS_FILE) |
| |
| $$($1_ALL_OBJS): $$($1_PCH_FILE) |
| |
| # Generate the corresponding compile_commands.json fragment. |
| $1_PCH_FILE_JSON := $$(MAKESUPPORT_OUTPUTDIR)/compile-commands/$$(subst /,_,$$(subst \ |
| $$(OUTPUTDIR)/,,$$($1_PCH_FILE))).json |
| $1_ALL_OBJS_JSON += $$($1_PCH_FILE_JSON) |
| |
| $$($1_PCH_FILE_JSON): $$($1_PRECOMPILED_HEADER) $$($1_COMPILE_VARDEPS_FILE) |
| $$(call WriteCompileCommandsFragment, $$@, $$(PWD), $$<, \ |
| $$($1_PCH_COMMAND) $$< -o $$($1_PCH_FILE), $$($1_PCH_FILE)) |
| endif |
| endif |
| endif |
| |
| # Create a rule to collect all the individual make dependency files into a |
| # single makefile. |
| $1_DEPS_FILE := $$($1_OBJECT_DIR)/$1.d |
| |
| $$($1_DEPS_FILE): $$($1_ALL_OBJS) |
| $(RM) $$@ |
| # CD into dir to reduce risk of hitting command length limits, which |
| # could otherwise happen if TOPDIR is a very long path. |
| $(CD) $$($1_OBJECT_DIR) && $(CAT) *.d > $$@.tmp |
| $(CD) $$($1_OBJECT_DIR) && $(CAT) *.d.targets | $(SORT) -u >> $$@.tmp |
| # After generating the file, which happens after all objects have been |
| # compiled, copy it to .old extension. On the next make invocation, this |
| # .old file will be included by make. |
| $(CP) $$@.tmp $$@.old |
| $(MV) $$@.tmp $$@ |
| |
| $1 += $$($1_DEPS_FILE) |
| |
| # The include must be on the .old file, which represents the state from the |
| # previous invocation of make. The file being included must not have a rule |
| # defined for it as otherwise make will think it has to run the rule before |
| # being able to include the file, which would be wrong since we specifically |
| # need the file as it was generated by a previous make invocation. |
| ifneq ($$(wildcard $$($1_DEPS_FILE).old), ) |
| $1_DEPS_FILE_LOADED := true |
| -include $$($1_DEPS_FILE).old |
| endif |
| |
| # Now call SetupCompileNativeFile for each source file we are going to compile. |
| $$(foreach file, $$($1_SRCS), \ |
| $$(eval $$(call SetupCompileNativeFile, $1_$$(notdir $$(file)),\ |
| FILE := $$(file), \ |
| BASE := $1, \ |
| )) \ |
| ) |
| |
| # Setup rule for printing progress info when compiling source files. |
| # This is a rough heuristic and may not always print accurate information. |
| $$($1_BUILD_INFO): $$($1_SRCS) $$($1_COMPILE_VARDEPS_FILE) |
| ifeq ($$(wildcard $$($1_TARGET)), ) |
| $(ECHO) 'Creating $$(subst $$(OUTPUTDIR)/,,$$($1_TARGET)) from $$(words \ |
| $$(filter-out %.vardeps, $$?)) file(s)' |
| else |
| $(ECHO) $$(strip 'Updating $$(subst $$(OUTPUTDIR)/,,$$($1_TARGET))' \ |
| $$(if $$(filter-out %.vardeps, $$?), \ |
| 'due to $$(words $$(filter-out %.vardeps, $$?)) file(s)', \ |
| $$(if $$(filter %.vardeps, $$?), 'due to makefile changes'))) |
| endif |
| $(TOUCH) $$@ |
| |
| # On windows we need to create a resource file |
| ifeq ($(call isTargetOs, windows), true) |
| ifneq ($$($1_VERSIONINFO_RESOURCE), ) |
| $1_RES := $$($1_OBJECT_DIR)/$$($1_BASENAME).res |
| $1_RES_DEPS_FILE := $$($1_RES).d |
| $1_RES_DEPS_TARGETS_FILE := $$($1_RES).d.targets |
| -include $$($1_RES_DEPS_FILE) |
| -include $$($1_RES_DEPS_TARGETS_FILE) |
| |
| $1_RES_VARDEPS := $$($1_RC) $$($1_RC_FLAGS) |
| $1_RES_VARDEPS_FILE := $$(call DependOnVariable, $1_RES_VARDEPS, \ |
| $$($1_RES).vardeps) |
| |
| $$($1_RES): $$($1_VERSIONINFO_RESOURCE) $$($1_RES_VARDEPS_FILE) |
| $$(call LogInfo, Compiling resource $$(notdir $$($1_VERSIONINFO_RESOURCE)) (for $$($1_BASENAME))) |
| $$(call MakeDir, $$(@D) $$($1_OBJECT_DIR)) |
| $$(call ExecuteWithLog, $$@, $$(call MakeCommandRelative, \ |
| $$($1_RC) $$($1_RC_FLAGS) $$($1_SYSROOT_CFLAGS) $(CC_OUT_OPTION)$$@ \ |
| $$($1_VERSIONINFO_RESOURCE) 2>&1 )) |
| # Windows RC compiler does not support -showIncludes, so we mis-use CL |
| # for this. Filter out RC specific arguments that are unknown to CL. |
| # For some unknown reason, in this case CL actually outputs the show |
| # includes to stderr so need to redirect it to hide the output from the |
| # main log. |
| $$(call ExecuteWithLog, $$($1_RES_DEPS_FILE).obj, \ |
| $$($1_CC) $$(filter-out -l%, $$($1_RC_FLAGS)) \ |
| $$($1_SYSROOT_CFLAGS) -showIncludes -nologo -TC \ |
| $(CC_OUT_OPTION)$$($1_RES_DEPS_FILE).obj -P -Fi$$($1_RES_DEPS_FILE).pp \ |
| $$($1_VERSIONINFO_RESOURCE)) 2>&1 \ |
| | $(TR) -d '\r' | $(GREP) -v -e "^Note: including file:" \ |
| -e "^$$(notdir $$($1_VERSIONINFO_RESOURCE))$$$$" || test "$$$$?" = "1" ; \ |
| $(ECHO) $$($1_RES): \\ > $$($1_RES_DEPS_FILE) ; \ |
| $(SED) $(WINDOWS_SHOWINCLUDE_SED_PATTERN) $$($1_RES_DEPS_FILE).obj.log \ |
| >> $$($1_RES_DEPS_FILE) ; \ |
| $(ECHO) >> $$($1_RES_DEPS_FILE) ;\ |
| $(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_RES_DEPS_FILE) \ |
| > $$($1_RES_DEPS_TARGETS_FILE) |
| endif |
| endif |
| |
| ifneq ($(DISABLE_MAPFILES), true) |
| $1_REAL_MAPFILE := $$($1_MAPFILE) |
| ifeq ($(call isTargetOs, windows), false) |
| ifneq ($$($1_REORDER), ) |
| $1_REAL_MAPFILE := $$($1_OBJECT_DIR)/mapfile |
| |
| $$($1_REAL_MAPFILE) : $$($1_MAPFILE) $$($1_REORDER) |
| $$(call MakeDir, $$(@D)) |
| $$(CP) $$($1_MAPFILE) $$@.tmp |
| $$(SED) -e 's=OUTPUTDIR=$$($1_OBJECT_DIR)=' $$($1_REORDER) >> $$@.tmp |
| $$(MV) $$@.tmp $$@ |
| endif |
| endif |
| endif |
| |
| # Pickup extra OPENJDK_TARGET_OS_TYPE and/or OPENJDK_TARGET_OS dependent variables |
| # for LDFLAGS and LIBS |
| $1_EXTRA_LDFLAGS += $$($1_LDFLAGS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_LDFLAGS_$(OPENJDK_TARGET_OS)) |
| $1_EXTRA_LIBS += $$($1_LIBS_$(OPENJDK_TARGET_OS_TYPE)) $$($1_LIBS_$(OPENJDK_TARGET_OS)) |
| ifneq ($$($1_REAL_MAPFILE), ) |
| $1_EXTRA_LDFLAGS += $(call SET_SHARED_LIBRARY_MAPFILE,$$($1_REAL_MAPFILE)) |
| endif |
| |
| ifneq ($$($1_COPY_DEBUG_SYMBOLS), false) |
| $1_COPY_DEBUG_SYMBOLS := $(COPY_DEBUG_SYMBOLS) |
| endif |
| |
| ifneq ($$($1_ZIP_EXTERNAL_DEBUG_SYMBOLS), false) |
| $1_ZIP_EXTERNAL_DEBUG_SYMBOLS := $(ZIP_EXTERNAL_DEBUG_SYMBOLS) |
| endif |
| |
| ifeq ($$($1_COPY_DEBUG_SYMBOLS), true) |
| ifneq ($$($1_DEBUG_SYMBOLS), false) |
| # Only copy debug symbols for dynamic libraries and programs. |
| ifneq ($$($1_TYPE), STATIC_LIBRARY) |
| # Generate debuginfo files. |
| ifeq ($(call isTargetOs, windows), true) |
| $1_EXTRA_LDFLAGS += -debug "-pdb:$$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).pdb" \ |
| "-map:$$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).map" |
| ifeq ($(SHIP_DEBUG_SYMBOLS), public) |
| $1_EXTRA_LDFLAGS += "-pdbstripped:$$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).stripped.pdb" |
| endif |
| $1_DEBUGINFO_FILES := $$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).pdb \ |
| $$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).map |
| |
| else ifeq ($(call isTargetOs, linux solaris), true) |
| $1_DEBUGINFO_FILES := $$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).debuginfo |
| # Setup the command line creating debuginfo files, to be run after linking. |
| # It cannot be run separately since it updates the original target file |
| $1_CREATE_DEBUGINFO_CMDS := \ |
| $$($1_OBJCOPY) --only-keep-debug $$($1_TARGET) $$($1_DEBUGINFO_FILES) $$(NEWLINE) \ |
| $(CD) $$($1_OUTPUT_DIR) && \ |
| $$($1_OBJCOPY) --add-gnu-debuglink=$$($1_DEBUGINFO_FILES) $$($1_TARGET) |
| |
| else ifeq ($(OPENJDK_TARGET_OS), aix) |
| # AIX does not provide the equivalent of OBJCOPY to extract debug symbols, |
| # so we copy the compiled object with symbols to the .debuginfo file, which |
| # happens prior to the STRIP_CMD on the original target object file. |
| $1_DEBUGINFO_FILES := $$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).debuginfo |
| $1_CREATE_DEBUGINFO_CMDS := $(CP) $$($1_TARGET) $$($1_DEBUGINFO_FILES) |
| |
| else ifeq ($(call isTargetOs, macosx), true) |
| $1_DEBUGINFO_FILES := \ |
| $$($1_OUTPUT_DIR)/$$($1_BASENAME).dSYM/Contents/Info.plist \ |
| $$($1_OUTPUT_DIR)/$$($1_BASENAME).dSYM/Contents/Resources/DWARF/$$($1_BASENAME) |
| $1_CREATE_DEBUGINFO_CMDS := \ |
| $(DSYMUTIL) --out $$($1_OUTPUT_DIR)/$$($1_BASENAME).dSYM $$($1_TARGET) |
| endif |
| |
| # Since the link rule creates more than one file that we want to track, |
| # we have to use some tricks to get make to cooperate. To properly |
| # trigger downstream dependants of $$($1_DEBUGINFO_FILES), we must have |
| # a recipe in the rule below. To avoid rerunning the recipe every time |
| # have it touch the target. If a debuginfo file is deleted by something |
| # external, explicitly delete the TARGET to trigger a rebuild of both. |
| ifneq ($$(wildcard $$($1_DEBUGINFO_FILES)), $$($1_DEBUGINFO_FILES)) |
| $$(call LogDebug, Deleting $$($1_BASENAME) because debuginfo files are missing) |
| $$(shell $(RM) $$($1_TARGET)) |
| endif |
| $$($1_DEBUGINFO_FILES): $$($1_TARGET) |
| $$(if $$(CORRECT_FUNCTION_IN_RECIPE_EVALUATION), \ |
| $$(if $$(wildcard $$@), , $$(error $$@ was not created for $$<)) \ |
| ) |
| $(TOUCH) $$@ |
| |
| $1 += $$($1_DEBUGINFO_FILES) |
| |
| ifeq ($$($1_ZIP_EXTERNAL_DEBUG_SYMBOLS), true) |
| $1_DEBUGINFO_ZIP := $$($1_OUTPUT_DIR)/$$($1_NOSUFFIX).diz |
| $1 += $$($1_DEBUGINFO_ZIP) |
| |
| # The dependency on TARGET is needed for debuginfo files |
| # to be rebuilt properly. |
| $$($1_DEBUGINFO_ZIP): $$($1_DEBUGINFO_FILES) $$($1_TARGET) |
| $(CD) $$($1_OUTPUT_DIR) && \ |
| $(ZIPEXE) -q -r $$@ $$(subst $$($1_OUTPUT_DIR)/,, $$($1_DEBUGINFO_FILES)) |
| |
| endif |
| endif # !STATIC_LIBRARY |
| endif # $1_DEBUG_SYMBOLS != false |
| endif # COPY_DEBUG_SYMBOLS |
| |
| # Unless specifically set, stripping should only happen if symbols are also |
| # being copied. |
| $$(call SetIfEmpty, $1_STRIP_SYMBOLS, $$($1_COPY_DEBUG_SYMBOLS)) |
| |
| ifneq ($$($1_STRIP_SYMBOLS), false) |
| ifneq ($$($1_STRIP), ) |
| # Default to using the global STRIPFLAGS. Allow for overriding with an empty value |
| $1_STRIPFLAGS ?= $(STRIPFLAGS) |
| $1_STRIP_CMD := $$($1_STRIP) $$($1_STRIPFLAGS) $$($1_TARGET) |
| endif |
| endif |
| |
| ifeq ($$($1_TYPE), STATIC_LIBRARY) |
| $1_VARDEPS := $$($1_AR) $$($1_ARFLAGS) $$($1_LIBS) \ |
| $$($1_EXTRA_LIBS) |
| $1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \ |
| $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).vardeps) |
| |
| # Generating a static library, ie object file archive. |
| ifeq ($(STATIC_BUILD), true) |
| ifeq ($$($1_USE_MAPFILE_FOR_SYMBOLS), true) |
| STATIC_MAPFILE_DEP := $$($1_MAPFILE) |
| endif |
| endif |
| |
| $1_TARGET_DEPS := $$($1_ALL_OBJS) $$($1_RES) $$($1_VARDEPS_FILE) $$(STATIC_MAPFILE_DEP) |
| |
| $$($1_TARGET): $$($1_TARGET_DEPS) |
| $$(call LogInfo, Building static library $$($1_BASENAME)) |
| $$(call ExecuteWithLog, $$($1_OBJECT_DIR)/$$($1_SAFE_NAME)_link, \ |
| $$($1_AR) $$($1_ARFLAGS) $(AR_OUT_OPTION)$$($1_TARGET) $$($1_ALL_OBJS) \ |
| $$($1_RES)) |
| ifeq ($(STATIC_BUILD), true) |
| ifeq ($$($1_USE_MAPFILE_FOR_SYMBOLS), true) |
| $(CP) $$($1_MAPFILE) $$(@D)/$$(basename $$(@F)).symbols |
| else |
| $(GetSymbols) |
| endif |
| endif |
| else |
| # A shared dynamic library or an executable binary has been specified |
| ifeq ($$($1_TYPE), LIBRARY) |
| # Generating a dynamic library. |
| $1_EXTRA_LDFLAGS += $$(call SET_SHARED_LIBRARY_NAME,$$($1_BASENAME)) |
| |
| # Create loadmap on AIX. Helps in diagnosing some problems. |
| ifneq ($(COMPILER_BINDCMD_FILE_FLAG), ) |
| $1_EXTRA_LDFLAGS += $(COMPILER_BINDCMD_FILE_FLAG)$$($1_OBJECT_DIR)/$$($1_NOSUFFIX).loadmap |
| endif |
| endif |
| |
| ifeq ($(call isTargetOs, windows), true) |
| ifeq ($$($1_EMBED_MANIFEST), true) |
| $1_EXTRA_LDFLAGS += -manifest:embed |
| endif |
| |
| $1_IMPORT_LIBRARY := $$($1_OBJECT_DIR)/$$($1_NAME).lib |
| $1_EXTRA_LDFLAGS += "-implib:$$($1_IMPORT_LIBRARY)" |
| ifeq ($$($1_TYPE), LIBRARY) |
| # To properly trigger downstream dependants of the import library, just as |
| # for debug files, we must have a recipe in the rule. To avoid rerunning |
| # the recipe every time have it touch the target. If an import library |
| # file is deleted by something external, explicitly delete the target to |
| # trigger a rebuild of both. |
| ifneq ($$(wildcard $$($1_IMPORT_LIBRARY)), $$($1_IMPORT_LIBRARY)) |
| $$(call LogDebug, Deleting $$($1_BASENAME) because import library is missing) |
| $$(shell $(RM) $$($1_TARGET)) |
| endif |
| $$($1_IMPORT_LIBRARY): $$($1_TARGET) |
| $$(if $$(CORRECT_FUNCTION_IN_RECIPE_EVALUATION), \ |
| $$(if $$(wildcard $$@), , $$(error $$@ was not created for $$<)) \ |
| ) |
| $(TOUCH) $$@ |
| endif |
| endif |
| |
| $1_VARDEPS := $$($1_LD) $$($1_SYSROOT_LDFLAGS) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) \ |
| $$(GLOBAL_LIBS) $$($1_LIBS) $$($1_EXTRA_LIBS) $$($1_MT) \ |
| $$($1_CREATE_DEBUGINFO_CMDS) $$($1_MANIFEST_VERSION) \ |
| $$($1_STRIP_CMD) |
| $1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \ |
| $$($1_OBJECT_DIR)/$$($1_NOSUFFIX).vardeps) |
| |
| $1_LD_OBJ_ARG := $$($1_ALL_OBJS) |
| |
| # If there are many object files, use an @-file... |
| ifneq ($$(word 17, $$($1_ALL_OBJS)), ) |
| $1_OBJ_FILE_LIST := $$($1_OBJECT_DIR)/_$1_objectfilenames.txt |
| ifneq ($(COMPILER_COMMAND_FILE_FLAG), ) |
| $1_LD_OBJ_ARG := $(COMPILER_COMMAND_FILE_FLAG)$$($1_OBJ_FILE_LIST) |
| else |
| # ...except for toolchains which don't support them. |
| $1_LD_OBJ_ARG := `cat $$($1_OBJ_FILE_LIST)` |
| endif |
| endif |
| |
| # Unfortunately the @-file trick does not work reliably when using clang. |
| # Clang does not propagate the @-file parameter to the ld sub process, but |
| # instead puts the full content on the command line. At least the llvm ld |
| # does not even support an @-file. |
| # |
| # When linking a large amount of object files, we risk hitting the limit |
| # of the command line length even on posix systems if the path length of |
| # the output dir is very long due to our use of absolute paths. To |
| # mitigate this, use paths relative to the output dir when linking over |
| # 500 files with clang and the output dir path is deep. |
| ifneq ($$(word 500, $$($1_ALL_OBJS)), ) |
| ifeq ($$(TOOLCHAIN_TYPE), clang) |
| # There is no strlen function in make, but checking path depth is a |
| # reasonable approximation. |
| ifneq ($$(word 10, $$(subst /, ,$$(OUTPUTDIR))), ) |
| $1_LINK_OBJS_RELATIVE := true |
| $1_ALL_OBJS_RELATIVE := $$(patsubst $$(OUTPUTDIR)/%, %, $$($1_ALL_OBJS)) |
| endif |
| endif |
| endif |
| |
| $1_TARGET_DEPS := $$($1_ALL_OBJS) $$($1_RES) $$($1_MANIFEST) \ |
| $$($1_REAL_MAPFILE) $$($1_VARDEPS_FILE) |
| |
| $$($1_TARGET): $$($1_TARGET_DEPS) |
| ifneq ($$($1_OBJ_FILE_LIST), ) |
| ifeq ($$($1_LINK_OBJS_RELATIVE), true) |
| $$(eval $$(call ListPathsSafely, $1_ALL_OBJS_RELATIVE, $$($1_OBJ_FILE_LIST))) |
| else |
| $$(eval $$(call ListPathsSafely, $1_ALL_OBJS, $$($1_OBJ_FILE_LIST))) |
| endif |
| endif |
| # Keep as much as possible on one execution line for best performance |
| # on Windows |
| $$(call LogInfo, Linking $$($1_BASENAME)) |
| ifeq ($(call isTargetOs, windows), true) |
| $$(call ExecuteWithLog, $$($1_OBJECT_DIR)/$$($1_SAFE_NAME)_link, \ |
| $$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $$($1_SYSROOT_LDFLAGS) \ |
| $(LD_OUT_OPTION)$$($1_TARGET) $$($1_LD_OBJ_ARG) $$($1_RES) $$(GLOBAL_LIBS) \ |
| $$($1_LIBS) $$($1_EXTRA_LIBS)) \ |
| | $(GREP) -v "^ Creating library .*\.lib and object .*\.exp" || \ |
| test "$$$$?" = "1" ; \ |
| $$($1_CREATE_DEBUGINFO_CMDS) |
| $$($1_STRIP_CMD) |
| else |
| $$(call ExecuteWithLog, $$($1_OBJECT_DIR)/$$($1_SAFE_NAME)_link, \ |
| $$(if $$($1_LINK_OBJS_RELATIVE), $$(CD) $$(OUTPUTDIR) ; ) \ |
| $$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $$($1_SYSROOT_LDFLAGS) \ |
| $(LD_OUT_OPTION)$$($1_TARGET) $$($1_LD_OBJ_ARG) $$($1_RES) $$(GLOBAL_LIBS) \ |
| $$($1_LIBS) $$($1_EXTRA_LIBS)) ; \ |
| $$($1_CREATE_DEBUGINFO_CMDS) |
| $$($1_STRIP_CMD) |
| endif |
| ifeq ($(call isTargetOs, windows), true) |
| ifneq ($$($1_MANIFEST), ) |
| $$($1_MT) -nologo -manifest $$($1_MANIFEST) -identity:"$$($1_NAME).exe, version=$$($1_MANIFEST_VERSION)" -outputresource:$$@;#1 |
| endif |
| endif |
| # On macosx, optionally run codesign on every binary. |
| # Remove signature explicitly first to avoid warnings if the linker |
| # added a default adhoc signature. |
| ifeq ($(MACOSX_CODESIGN_MODE), hardened) |
| $(CODESIGN) --remove-signature $$@ |
| $(CODESIGN) -f -s "$(MACOSX_CODESIGN_IDENTITY)" --timestamp --options runtime \ |
| --entitlements $$(call GetEntitlementsFile, $$@) $$@ |
| else ifeq ($(MACOSX_CODESIGN_MODE), debug) |
| $(CODESIGN) --remove-signature $$@ |
| $(CODESIGN) -f -s - --entitlements $$(call GetEntitlementsFile, $$@) $$@ |
| endif |
| endif |
| |
| ifeq ($(GENERATE_COMPILE_COMMANDS_ONLY), true) |
| $1 := $$($1_ALL_OBJS_JSON) |
| endif |
| endef |
| |
| endif # _NATIVE_COMPILATION_GMK |
