| #!/usr/bin/env python3.4 |
| # |
| # Copyright 2016 - The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import time |
| |
| from acts import asserts |
| from acts import base_test |
| from acts.test_decorators import test_tracker_info |
| from acts_contrib.test_utils.wifi import wifi_constants |
| from acts_contrib.test_utils.wifi import wifi_test_utils as wutils |
| from acts_contrib.test_utils.wifi.WifiBaseTest import WifiBaseTest |
| |
| WifiEnums = wutils.WifiEnums |
| NETWORK_ID_ERROR = "Network don't have ID" |
| NETWORK_ERROR = "Device is not connected to reference network" |
| |
| |
| class WifiNewSetupAutoJoinTest(WifiBaseTest): |
| |
| def __init__(self, configs): |
| super().__init__(configs) |
| self.enable_packet_log = True |
| |
| def add_network_and_enable(self, network): |
| """Add a network and enable it. |
| |
| Args: |
| network : Network details for the network to be added. |
| |
| """ |
| ret = self.dut.droid.wifiAddNetwork(network) |
| asserts.assert_true(ret != -1, "Add network %r failed" % network) |
| self.dut.droid.wifiEnableNetwork(ret, 0) |
| |
| def setup_class(self): |
| """It will setup the required dependencies from config file and configure |
| the required networks for auto-join testing. Configured networks will |
| not be removed. If networks are already configured it will skip |
| configuring the networks |
| |
| Returns: |
| True if successfully configured the requirements for testing. |
| """ |
| super().setup_class() |
| |
| self.dut = self.android_devices[0] |
| wutils.wifi_test_device_init(self.dut) |
| req_params = ("atten_val", "ping_addr") |
| opt_param = ["reference_networks"] |
| self.unpack_userparams( |
| req_param_names=req_params, opt_param_names=opt_param) |
| |
| if "AccessPoint" in self.user_params: |
| self.legacy_configure_ap_and_start(ap_count=2) |
| |
| configured_networks = self.dut.droid.wifiGetConfiguredNetworks() |
| self.log.debug("Configured networks :: {}".format(configured_networks)) |
| count_confnet = 0 |
| result = False |
| if self.reference_networks[0]['2g']['SSID'] == self.reference_networks[ |
| 0]['5g']['SSID']: |
| self.ref_ssid_count = 1 |
| else: |
| self.ref_ssid_count = 2 # Different SSID for 2g and 5g |
| for confnet in configured_networks: |
| if confnet[WifiEnums.SSID_KEY] == self.reference_networks[0]['2g'][ |
| 'SSID']: |
| count_confnet += 1 |
| elif confnet[WifiEnums.SSID_KEY] == self.reference_networks[0][ |
| '5g']['SSID']: |
| count_confnet += 1 |
| self.log.info("count_confnet {}".format(count_confnet)) |
| if count_confnet == self.ref_ssid_count: |
| return |
| else: |
| self.log.info("Configured networks for testing") |
| self.dut.droid.wakeLockAcquireBright() |
| self.dut.droid.wakeUpNow() |
| # Add and enable all networks. |
| for network in self.reference_networks: |
| self.add_network_and_enable(network['2g']) |
| self.add_network_and_enable(network['5g']) |
| self.dut.droid.wifiLockRelease() |
| self.dut.droid.goToSleepNow() |
| |
| def check_connection(self, network_bssid): |
| """Check current wifi connection networks. |
| Args: |
| network_bssid: Network bssid to which connection. |
| Returns: |
| True if connection to given network happen, else return False. |
| """ |
| time.sleep(40) #time for connection state to be updated |
| self.log.info("Check network for {}".format(network_bssid)) |
| current_network = self.dut.droid.wifiGetConnectionInfo() |
| self.log.debug("Current network: {}".format(current_network)) |
| if WifiEnums.BSSID_KEY in current_network: |
| return current_network[WifiEnums.BSSID_KEY] == network_bssid |
| return False |
| |
| def set_attn_and_validate_connection(self, attn_value, bssid): |
| """Validate wifi connection status on different attenuation setting. |
| |
| Args: |
| attn_value: Attenuation value for different APs signal. |
| bssid: Bssid of expected network. |
| |
| Returns: |
| True if bssid of current network match, else false. |
| """ |
| self.attenuators[0].set_atten(attn_value[0]) |
| self.attenuators[1].set_atten(attn_value[1]) |
| self.attenuators[2].set_atten(attn_value[2]) |
| self.attenuators[3].set_atten(attn_value[3]) |
| time.sleep(10) # wait time for attenuation |
| self.dut.droid.wakeLockAcquireBright() |
| self.dut.droid.wakeUpNow() |
| try: |
| asserts.assert_true( |
| self.check_connection(bssid), |
| "Device is not connected to required bssid {}".format(bssid)) |
| time.sleep(10) #wait for connection to be active |
| asserts.assert_true( |
| wutils.validate_connection(self.dut, self.ping_addr), |
| "Error, No Internet connection for current bssid {}".format( |
| bssid)) |
| finally: |
| self.dut.droid.wifiLockRelease() |
| self.dut.droid.goToSleepNow() |
| |
| def teardown_class(self): |
| for ad in self.android_devices: |
| wutils.reset_wifi(ad) |
| if "AccessPoint" in self.user_params: |
| del self.user_params["reference_networks"] |
| del self.user_params["open_network"] |
| |
| def setup_test(self): |
| super().setup_test() |
| # initialize attenuators |
| self.attenuators[0].set_atten(0) |
| self.attenuators[1].set_atten(0) |
| self.attenuators[2].set_atten(90) |
| self.attenuators[3].set_atten(90) |
| |
| |
| """ Tests Begin """ |
| |
| """ Test wifi auto join functionality move in range of AP1. |
| |
| 1. Attenuate the signal to low range of AP1 and Ap2 not visible at all. |
| 2. Wake up the device. |
| 3. Check that device is connected to right BSSID and maintain stable |
| connection to BSSID in range. |
| """ |
| @test_tracker_info(uuid="9ea2c78d-d305-497f-87a5-f621f0a4b34e") |
| def test_autojoin_Ap1_2g_AP1_20_AP2_95_AP3_95(self): |
| att0, att1, att2, att3 = self.atten_val["Ap1_2g"] |
| variance = 5 |
| attn_value = [att0 + variance * 2, att1, att2, att3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="7c34a508-2ffa-4bca-82b3-9637b7c8250a") |
| def test_autojoin_Ap1_2g_AP1_15_AP2_95_AP3_95(self): |
| att0, att1, att2, att3 = self.atten_val["Ap1_2g"] |
| variance = 5 |
| attn_value = [att0 + variance, att1, att2, att3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="ea614fcc-7fca-4172-ba3a-5978427eb40f") |
| def test_autojoin_Ap1_2g_AP1_10_AP2_95_AP3_95(self): |
| att0, att1, att2, att3 = self.atten_val["Ap1_2g"] |
| variance = 5 |
| attn_value = [att0, att1, att2, att3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="a1ad25cf-11e7-4240-b3c0-9f14325d5b2d") |
| def test_autojoin_Ap1_2g_AP1_5_AP2_95_AP3_95(self): |
| att0, att1, att2, att3 = self.atten_val["Ap1_2g"] |
| variance = 5 |
| attn_value = [att0 - variance, att1, att2, att3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| """ Test wifi auto join functionality move to high range. |
| |
| 1. Attenuate the signal to high range of AP1. |
| 2. Wake up the device. |
| 3. Check that device is connected to right BSSID and maintain stable |
| connection to BSSID in range. |
| """ |
| @test_tracker_info(uuid="b5eba5ec-96e5-4bd8-b483-f5b2a9504558") |
| def test_autojoin_Ap1_2gto5g_AP1_55_AP2_10_AP3_95(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap1_2gto5g"] |
| variance = 5 |
| attn_value = [att0 + variance * 2, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["5g"]['bssid']) |
| |
| @test_tracker_info(uuid="e63543f7-5f43-4ba2-a5bd-2af3c159a622") |
| def test_autojoin_Ap1_2gto5g_AP1_50_AP2_10_AP3_95(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap1_2gto5g"] |
| variance = 5 |
| attn_value = [att0 + variance, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["5g"]['bssid']) |
| |
| @test_tracker_info(uuid="0c2cef5d-695d-4d4e-832d-f5e8b393a09c") |
| def test_autojoin_Ap1_2gto5g_AP1_45_AP2_10_AP3_95(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap1_2gto5g"] |
| variance = 5 |
| attn_value = [att0, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["5g"]['bssid']) |
| |
| """ Test wifi auto join functionality move to low range toward AP2. |
| |
| 1. Attenuate the signal to medium range of AP1 and low range of AP2. |
| 2. Wake up the device. |
| 3. Check that device is connected to right BSSID and maintain stable |
| connection to BSSID in range. |
| """ |
| @test_tracker_info(uuid="37822578-d35c-462c-87c0-7a2d9252938c") |
| def test_autojoin_in_AP1_5gto2g_AP1_5_AP2_80_AP3_95(self): |
| att0, att1, att2, attn3 = self.atten_val["In_AP1_5gto2g"] |
| variance = 5 |
| attn_value = [att0 - variance, att1 + variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="194ffe44-9718-4beb-b69e-cccb569f9b81") |
| def test_autojoin_in_AP1_5gto2g_AP1_10_AP2_75_AP3_95(self): |
| att0, att1, att2, attn3 = self.atten_val["In_AP1_5gto2g"] |
| variance = 5 |
| attn_value = [att0, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="09bdcb0f-7833-4604-a839-f7d981bf4aca") |
| def test_autojoin_in_AP1_5gto2g_AP1_15_AP2_70_AP3_95(self): |
| att0, att1, att2, attn3 = self.atten_val["In_AP1_5gto2g"] |
| variance = 5 |
| attn_value = [att0 + variance, att1 - variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| """ Test wifi auto join functionality move from low range of AP1 to better |
| range of AP2. |
| |
| 1. Attenuate the signal to low range of AP1 and medium range of AP2. |
| 2. Wake up the device. |
| 3. Check that device is connected to right BSSID and maintain stable |
| connection to BSSID in range. |
| """ |
| @test_tracker_info(uuid="8ffdcab1-2bfb-4acd-b1e8-089ba8a4ec41") |
| def test_autojoin_swtich_AP1toAp2_AP1_65_AP2_75_AP3_2(self): |
| att0, att1, att2, attn3 = self.atten_val["Swtich_AP1toAp2"] |
| variance = 5 |
| attn_value = [att0 - variance, att1 + variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="23e05821-3c53-4033-830e-a446b6105831") |
| def test_autojoin_swtich_AP1toAp2_AP1_70_AP2_70_AP3_2(self): |
| att0, att1, att2, attn3 = self.atten_val["Swtich_AP1toAp2"] |
| variance = 5 |
| attn_value = [att0, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="a56ad87d-d37f-4606-9ae8-af6f55cbb6cf") |
| def test_autojoin_swtich_AP1toAp2_AP1_75_AP2_65_AP3_2(self): |
| att0, att1, att2, attn3 = self.atten_val["Swtich_AP1toAp2"] |
| variance = 5 |
| attn_value = [att0 + variance, att1 - variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| """ Test wifi auto join functionality move to high range of AP2. |
| |
| 1. Attenuate the signal to out range of AP1 and high range of AP2. |
| 2. Wake up the device. |
| 3. Check that device is connected to right BSSID and maintain stable |
| connection to BSSID in range. |
| """ |
| @test_tracker_info(uuid="7a8b9242-f93c-449a-90a6-4562274a213a") |
| def test_autojoin_Ap2_2gto5g_AP1_70_AP2_85_AP3_75(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap2_2gto5g"] |
| variance = 5 |
| attn_value = [att0 - variance, att1 + variance * 2, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["5g"]['bssid']) |
| |
| @test_tracker_info(uuid="5e0c5485-a3ae-438a-92e5-9a6b5a22cb82") |
| def test_autojoin_Ap2_2gto5g_AP1_75_AP2_80_AP3_75(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap2_2gto5g"] |
| variance = 5 |
| attn_value = [att0, att1 + variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["5g"]['bssid']) |
| |
| @test_tracker_info(uuid="3b289144-a12a-424f-822e-8d173d75c3c3") |
| def test_autojoin_Ap2_2gto5g_AP1_75_AP2_75_AP3_75(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap2_2gto5g"] |
| variance = 5 |
| attn_value = [att0, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["5g"]['bssid']) |
| |
| """ Test wifi auto join functionality move to low range of AP2. |
| |
| 1. Attenuate the signal to low range of AP2. |
| 2. Wake up the device. |
| 3. Check that device is connected to right BSSID and maintain stable. |
| """ |
| @test_tracker_info(uuid="009457df-f430-402c-96ab-c456b043b6f5") |
| def test_autojoin_Ap2_5gto2g_AP1_75_AP2_70_AP3_10(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap2_5gto2g"] |
| variance = 5 |
| attn_value = [att0, att1 - variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="15ef731c-ddfb-4118-aedb-c177f50bdea0") |
| def test_autojoin_Ap2_5gto2g_AP1_75_AP2_75_AP3_10(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap2_5gto2g"] |
| variance = 5 |
| attn_value = [att0, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="f79b0570-56a0-43d2-962d-9e114d48bacf") |
| def test_autojoin_Ap2_5gto2g_AP1_75_AP2_80_AP3_10(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap2_5gto2g"] |
| variance = 5 |
| attn_value = [att0, att1 + variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="c6d070af-b601-42f1-adec-5ac564154b29") |
| def test_autojoin_out_of_range(self): |
| """Test wifi auto join functionality move to low range. |
| |
| 1. Attenuate the signal to out of range. |
| 2. Wake up the device. |
| 3. Start the scan. |
| 4. Check that device is not connected to any network. |
| """ |
| self.attenuators[0].set_atten(90) |
| self.attenuators[1].set_atten(90) |
| self.attenuators[2].set_atten(90) |
| self.attenuators[3].set_atten(90) |
| self.dut.droid.wakeLockAcquireBright() |
| self.dut.droid.wakeUpNow() |
| try: |
| wutils.start_wifi_connection_scan(self.dut) |
| wifi_results = self.dut.droid.wifiGetScanResults() |
| self.log.debug("Scan result {}".format(wifi_results)) |
| time.sleep(20) |
| current_network = self.dut.droid.wifiGetConnectionInfo() |
| self.log.info("Current network: {}".format(current_network)) |
| asserts.assert_true( |
| ('network_id' in current_network and |
| current_network['network_id'] == -1), |
| "Device is connected to network {}".format(current_network)) |
| finally: |
| self.dut.droid.wifiLockRelease() |
| self.dut.droid.goToSleepNow() |
| |
| """ Test wifi auto join functionality move in low range of AP2. |
| |
| 1. Attenuate the signal to move in range of AP2 and Ap1 not visible at all. |
| 2. Wake up the device. |
| 3. Check that device is connected to right BSSID and maintain stable |
| connection to BSSID in range. |
| """ |
| @test_tracker_info(uuid="15c27654-bae0-4d2d-bdc8-54fb04b901d1") |
| def test_autojoin_Ap2_2g_AP1_75_AP2_85_AP3_10(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap2_2g"] |
| variance = 5 |
| attn_value = [att0, att1 + variance * 2, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="af40824a-4d65-4789-980f-d534abeca36b") |
| def test_autojoin_Ap2_2g_AP1_75_AP2_80_AP3_10(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap2_2g"] |
| variance = 5 |
| attn_value = [att0, att1 + variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="2d482060-9865-472b-810b-c74c6a099e6c") |
| def test_autojoin_Ap2_2g_AP1_75_AP2_75_AP3_10(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap2_2g"] |
| variance = 5 |
| attn_value = [att0, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="b5cad09e-6e31-40f4-a568-2a1d5271e20c") |
| def test_autojoin_Ap2_2g_AP1_75_AP2_70_AP3_10(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap2_2g"] |
| variance = 5 |
| attn_value = [att0, att1 - variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| """ Test wifi auto join functionality move to medium range of Ap2 and |
| low range of AP1. |
| |
| 1. Attenuate the signal to move in medium range of AP2 and low range of AP1. |
| 2. Wake up the device. |
| 3. Check that device is connected to right BSSID and maintain stable |
| connection to BSSID in range. |
| """ |
| @test_tracker_info(uuid="80e74c78-59e2-46db-809d-cb03bd1b6824") |
| def test_autojoin_in_Ap2_5gto2g_AP1_75_AP2_70_AP3_10(self): |
| att0, att1, att2, attn3 = self.atten_val["In_Ap2_5gto2g"] |
| variance = 5 |
| attn_value = [att0, att1 - variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="d2a188bd-91cf-4412-a098-739c0c236fe1") |
| def test_autojoin_in_Ap2_5gto2g_AP1_75_AP2_75_AP3_10(self): |
| att0, att1, att2, attn3 = self.atten_val["In_Ap2_5gto2g"] |
| variance = 5 |
| attn_value = [att0, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="032e81e9-bc8a-4fa2-a96b-d733c241869e") |
| def test_autojoin_in_Ap2_5gto2g_AP1_75_AP2_80_AP3_10(self): |
| att0, att1, att2, attn3 = self.atten_val["In_Ap2_5gto2g"] |
| variance = 5 |
| attn_value = [att0, att1 + variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[1]["2g"]['bssid']) |
| |
| """ Test wifi auto join functionality move from low range of AP2 to better |
| range of AP1. |
| |
| 1. Attenuate the signal to low range of AP2 and medium range of AP1. |
| 2. Wake up the device. |
| 3. Check that device is connected to right BSSID and maintain stable |
| connection to BSSID in range. |
| """ |
| @test_tracker_info(uuid="01faeba0-bd66-4d30-a3d9-b81e959025b2") |
| def test_autojoin_swtich_AP2toAp1_AP1_15_AP2_65_AP3_75(self): |
| att0, att1, att2, attn3 = self.atten_val["Swtich_AP2toAp1"] |
| variance = 5 |
| attn_value = [att0 + variance, att1 - variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="68b15c50-03ab-4385-9231-280002315fe5") |
| def test_autojoin_swtich_AP2toAp1_AP1_10_AP2_70_AP3_75(self): |
| att0, att1, att2, attn3 = self.atten_val["Swtich_AP2toAp1"] |
| variance = 5 |
| attn_value = [att0, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="1986d79b-097e-44c9-9aff-7bcd56490c3b") |
| def test_autojoin_swtich_AP2toAp1_AP1_5_AP2_75_AP3_75(self): |
| att0, att1, att2, attn3 = self.atten_val["Swtich_AP2toAp1"] |
| variance = 5 |
| attn_value = [att0 - variance, att1 + variance, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| """ Test wifi auto join functionality move to medium range of AP1. |
| |
| 1. Attenuate the signal to medium range of AP1. |
| 2. Wake up the device. |
| 3. Check that device is connected to right BSSID and maintain stable |
| connection to BSSID in range. |
| """ |
| @test_tracker_info(uuid="ec509d40-e339-47c2-995e-cc77f5a28687") |
| def test_autojoin_Ap1_5gto2g_AP1_10_AP2_80_AP3_95(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap1_5gto2g"] |
| variance = 5 |
| attn_value = [att0, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="ddc66d1e-3241-4040-996a-85bc2a2a4d67") |
| def test_autojoin_Ap1_5gto2g_AP1_15_AP2_80_AP3_95(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap1_5gto2g"] |
| variance = 5 |
| attn_value = [att0 + variance, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| @test_tracker_info(uuid="dfc84504-230f-428e-b701-edc496d0e7b3") |
| def test_autojoin_Ap1_5gto2g_AP1_20_AP2_80_AP3_95(self): |
| att0, att1, att2, attn3 = self.atten_val["Ap1_5gto2g"] |
| variance = 5 |
| attn_value = [att0 + variance * 2, att1, att2, attn3] |
| self.set_attn_and_validate_connection( |
| attn_value, self.reference_networks[0]["2g"]['bssid']) |
| |
| """ Tests End """ |
