| #!/usr/bin/env python3 |
| # |
| # Copyright (C) 2016 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); you may not |
| # use this file except in compliance with the License. You may obtain a copy of |
| # the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the |
| # License for the specific language governing permissions and limitations under |
| # the License. |
| |
| ### Generic Constants Begin ### |
| |
| bt_default_timeout = 15 |
| default_rfcomm_timeout_ms = 10000 |
| default_bluetooth_socket_timeout_ms = 10000 |
| pan_connect_timeout = 5 |
| bt_discovery_timeout = 3 |
| small_timeout = 0.0001 |
| |
| # Time delay (in seconds) at the end of each LE CoC Test to give sufficient time |
| # for the ACL LE link to be disconnected. The ACL link stays connected after |
| # L2CAP disconnects. An example of the timeout is L2CAP_LINK_INACTIVITY_TOUT. |
| # This delay must be greater than the maximum of these timeouts. |
| # TODO: Investigate the use of broadcast intent |
| # BluetoothDevice.ACTION_ACL_DISCONNECTED to replace this delay method. |
| l2cap_max_inactivity_delay_after_disconnect = 5 |
| |
| # LE specifications related constants |
| le_connection_interval_time_step_ms = 1.25 |
| le_default_supervision_timeout = 2000 |
| default_le_data_length = 23 |
| default_le_connection_interval_ms = 30 |
| le_connection_event_time_step_ms = 0.625 |
| |
| # Headers of LE L2CAP Connection-oriented Channels. See section 3.4, Vol |
| # 3, Part A, Version 5.0. |
| l2cap_header_size = 4 |
| l2cap_coc_sdu_length_field_size = 2 |
| l2cap_coc_header_size = l2cap_header_size + l2cap_coc_sdu_length_field_size |
| |
| java_integer = {"min": -2147483648, "max": 2147483647} |
| |
| btsnoop_log_path_on_device = "/data/misc/bluetooth/logs/btsnoop_hci.log" |
| btsnoop_last_log_path_on_device = \ |
| "/data/misc/bluetooth/logs/btsnoop_hci.log.last" |
| pairing_variant_passkey_confirmation = 2 |
| |
| # Callback strings |
| scan_result = "BleScan{}onScanResults" |
| scan_failed = "BleScan{}onScanFailed" |
| batch_scan_result = "BleScan{}onBatchScanResult" |
| adv_fail = "BleAdvertise{}onFailure" |
| adv_succ = "BleAdvertise{}onSuccess" |
| bluetooth_off = "BluetoothStateChangedOff" |
| bluetooth_on = "BluetoothStateChangedOn" |
| mtu_changed = "GattConnect{}onMtuChanged" |
| advertising_set_started = "AdvertisingSet{}onAdvertisingSetStarted" |
| advertising_set_stopped = "AdvertisingSet{}onAdvertisingSetStopped" |
| advertising_set_on_own_address_read = "AdvertisingSet{}onOwnAddressRead" |
| advertising_set_enabled = "AdvertisingSet{}onAdvertisingEnabled" |
| advertising_set_data_set = "AdvertisingSet{}onAdvertisingDataSet" |
| advertising_set_scan_response_set = "AdvertisingSet{}onScanResponseDataSet" |
| advertising_set_parameters_update = \ |
| "AdvertisingSet{}onAdvertisingParametersUpdated" |
| advertising_set_periodic_parameters_updated = \ |
| "AdvertisingSet{}onPeriodicAdvertisingParametersUpdated" |
| advertising_set_periodic_data_set = \ |
| "AdvertisingSet{}onPeriodicAdvertisingDataSet" |
| advertising_set_periodic_enable = "AdvertisingSet{}onPeriodicAdvertisingEnable" |
| bluetooth_profile_connection_state_changed = \ |
| "BluetoothProfileConnectionStateChanged" |
| bluetooth_le_on = "BleStateChangedOn" |
| bluetooth_le_off = "BleStateChangedOff" |
| bluetooth_a2dp_codec_config_changed = "BluetoothA2dpCodecConfigChanged" |
| # End Callback Strings |
| |
| batch_scan_not_supported_list = [ |
| "Nexus 4", |
| "Nexus 5", |
| "Nexus 7", |
| ] |
| |
| ### Generic Constants End ### |
| |
| ### Bluetooth Constants Begin ### |
| |
| # rfcomm test uuids |
| rfcomm_secure_uuid = "fa87c0d0-afac-11de-8a39-0800200c9a66" |
| rfcomm_insecure_uuid = "8ce255c0-200a-11e0-ac64-0800200c9a66" |
| |
| # bluetooth socket connection test uuid |
| bluetooth_socket_conn_test_uuid = "12345678-1234-5678-9abc-123456789abc" |
| |
| # Bluetooth Adapter Scan Mode Types |
| bt_scan_mode_types = { |
| "state_off": -1, |
| "none": 0, |
| "connectable": 1, |
| "connectable_discoverable": 3 |
| } |
| |
| # Bluetooth Adapter State Constants |
| bt_adapter_states = { |
| "off": 10, |
| "turning_on": 11, |
| "on": 12, |
| "turning_off": 13, |
| "ble_turning_on": 14, |
| "ble_on": 15, |
| "ble_turning_off": 16 |
| } |
| |
| # Should be kept in sync with BluetoothProfile.java |
| bt_profile_constants = { |
| "headset": 1, |
| "a2dp": 2, |
| "health": 3, |
| "input_device": 4, |
| "pan": 5, |
| "pbap_server": 6, |
| "gatt": 7, |
| "gatt_server": 8, |
| "map": 9, |
| "sap": 10, |
| "a2dp_sink": 11, |
| "avrcp_controller": 12, |
| "headset_client": 16, |
| "pbap_client": 17, |
| "map_mce": 18 |
| } |
| |
| # Bluetooth RFCOMM UUIDs as defined by the SIG |
| bt_rfcomm_uuids = { |
| "default_uuid": "457807c0-4897-11df-9879-0800200c9a66", |
| "base_uuid": "00000000-0000-1000-8000-00805F9B34FB", |
| "sdp": "00000001-0000-1000-8000-00805F9B34FB", |
| "udp": "00000002-0000-1000-8000-00805F9B34FB", |
| "rfcomm": "00000003-0000-1000-8000-00805F9B34FB", |
| "tcp": "00000004-0000-1000-8000-00805F9B34FB", |
| "tcs_bin": "00000005-0000-1000-8000-00805F9B34FB", |
| "tcs_at": "00000006-0000-1000-8000-00805F9B34FB", |
| "att": "00000007-0000-1000-8000-00805F9B34FB", |
| "obex": "00000008-0000-1000-8000-00805F9B34FB", |
| "ip": "00000009-0000-1000-8000-00805F9B34FB", |
| "ftp": "0000000A-0000-1000-8000-00805F9B34FB", |
| "http": "0000000C-0000-1000-8000-00805F9B34FB", |
| "wsp": "0000000E-0000-1000-8000-00805F9B34FB", |
| "bnep": "0000000F-0000-1000-8000-00805F9B34FB", |
| "upnp": "00000010-0000-1000-8000-00805F9B34FB", |
| "hidp": "00000011-0000-1000-8000-00805F9B34FB", |
| "hardcopy_control_channel": "00000012-0000-1000-8000-00805F9B34FB", |
| "hardcopy_data_channel": "00000014-0000-1000-8000-00805F9B34FB", |
| "hardcopy_notification": "00000016-0000-1000-8000-00805F9B34FB", |
| "avctp": "00000017-0000-1000-8000-00805F9B34FB", |
| "avdtp": "00000019-0000-1000-8000-00805F9B34FB", |
| "cmtp": "0000001B-0000-1000-8000-00805F9B34FB", |
| "mcap_control_channel": "0000001E-0000-1000-8000-00805F9B34FB", |
| "mcap_data_channel": "0000001F-0000-1000-8000-00805F9B34FB", |
| "l2cap": "00000100-0000-1000-8000-00805F9B34FB" |
| } |
| |
| # Should be kept in sync with BluetoothProfile#STATE_* constants. |
| bt_profile_states = { |
| "disconnected": 0, |
| "connecting": 1, |
| "connected": 2, |
| "disconnecting": 3 |
| } |
| |
| # Access Levels from BluetoothDevice. |
| bt_access_levels = {"access_allowed": 1, "access_denied": 2} |
| |
| # Priority levels as defined in BluetoothProfile.java. |
| bt_priority_levels = { |
| "auto_connect": 1000, |
| "on": 100, |
| "off": 0, |
| "undefined": -1 |
| } |
| |
| # A2DP codec configuration constants as defined in |
| # frameworks/base/core/java/android/bluetooth/BluetoothCodecConfig.java |
| codec_types = { |
| 'SBC': 0, |
| 'AAC': 1, |
| 'APTX': 2, |
| 'APTX-HD': 3, |
| 'LDAC': 4, |
| 'MAX': 5, |
| 'INVALID': 1000000 |
| } |
| |
| codec_priorities = {'DISABLED': -1, 'DEFAULT': 0, 'HIGHEST': 1000000} |
| |
| sample_rates = { |
| 'NONE': 0, |
| '44100': 0x1 << 0, |
| '48000': 0x1 << 1, |
| '88200': 0x1 << 2, |
| '96000': 0x1 << 3, |
| '176400': 0x1 << 4, |
| '192000': 0x1 << 5 |
| } |
| |
| bits_per_samples = {'NONE': 0, '16': 0x1 << 0, '24': 0x1 << 1, '32': 0x1 << 2} |
| |
| channel_modes = {'NONE': 0, 'MONO': 0x1 << 0, 'STEREO': 0x1 << 1} |
| |
| # Bluetooth HID constants. |
| hid_connection_timeout = 5 |
| |
| # Bluetooth HID EventFacade constants. |
| hid_on_set_report_event = "onSetReport" |
| hid_on_get_report_event = "onGetReport" |
| hid_on_set_protocol_event = "onSetProtocol" |
| hid_on_intr_data_event = "onInterruptData" |
| hid_on_virtual_cable_unplug_event = "onVirtualCableUnplug" |
| hid_id_keyboard = 1 |
| hid_id_mouse = 2 |
| hid_default_event_timeout = 15 |
| hid_default_set_report_payload = "Haha" |
| |
| ### Bluetooth Constants End ### |
| |
| ### Bluetooth Low Energy Constants Begin ### |
| |
| # Bluetooth Low Energy scan callback types |
| ble_scan_settings_callback_types = { |
| "all_matches": 1, |
| "first_match": 2, |
| "match_lost": 4, |
| "found_and_lost": 6 |
| } |
| |
| # Bluetooth Low Energy scan settings match mode |
| ble_scan_settings_match_modes = {"aggresive": 1, "sticky": 2} |
| |
| # Bluetooth Low Energy scan settings match nums |
| ble_scan_settings_match_nums = {"one": 1, "few": 2, "max": 3} |
| |
| # Bluetooth Low Energy scan settings result types |
| ble_scan_settings_result_types = {"full": 0, "abbreviated": 1} |
| |
| # Bluetooth Low Energy scan settings mode |
| ble_scan_settings_modes = { |
| "opportunistic": -1, |
| "low_power": 0, |
| "balanced": 1, |
| "low_latency": 2 |
| } |
| |
| # Bluetooth Low Energy scan settings report delay millis |
| ble_scan_settings_report_delay_milli_seconds = { |
| "min": 0, |
| "max": 9223372036854775807 |
| } |
| |
| # Bluetooth Low Energy scan settings phy |
| ble_scan_settings_phys = {"1m": 1, "coded": 3, "all_supported": 255} |
| |
| # Bluetooth Low Energy advertise settings types |
| ble_advertise_settings_types = {"non_connectable": 0, "connectable": 1} |
| |
| # Bluetooth Low Energy advertise settings modes |
| ble_advertise_settings_modes = { |
| "low_power": 0, |
| "balanced": 1, |
| "low_latency": 2 |
| } |
| |
| # Bluetooth Low Energy advertise settings tx power |
| ble_advertise_settings_tx_powers = { |
| "ultra_low": 0, |
| "low": 1, |
| "medium": 2, |
| "high": 3 |
| } |
| |
| # Bluetooth Low Energy advertise settings own address type |
| ble_advertise_settings_own_address_types = { |
| "public": 0, |
| "random": 1 |
| } |
| |
| # Bluetooth Low Energy service uuids for specific devices |
| ble_uuids = { |
| "p_service": "0000feef-0000-1000-8000-00805f9b34fb", |
| "hr_service": "0000180d-0000-1000-8000-00805f9b34fb" |
| } |
| |
| # Bluetooth Low Energy advertising error codes |
| ble_advertise_error_code = { |
| "data_too_large": 1, |
| "too_many_advertisers": 2, |
| "advertisement_already_started": 3, |
| "bluetooth_internal_failure": 4, |
| "feature_not_supported": 5 |
| } |
| |
| ### Bluetooth Low Energy Constants End ### |
| |
| ### Bluetooth GATT Constants Begin ### |
| |
| # Gatt Callback error messages |
| gatt_cb_err = { |
| "char_write_req_err": |
| "Characteristic Write Request event not found. Expected {}", |
| "char_write_err": "Characteristic Write event not found. Expected {}", |
| "desc_write_req_err": |
| "Descriptor Write Request event not found. Expected {}", |
| "desc_write_err": "Descriptor Write event not found. Expected {}", |
| "char_read_err": "Characteristic Read event not found. Expected {}", |
| "char_read_req_err": "Characteristic Read Request not found. Expected {}", |
| "desc_read_err": "Descriptor Read event not found. Expected {}", |
| "desc_read_req_err": |
| "Descriptor Read Request event not found. Expected {}", |
| "rd_remote_rssi_err": "Read Remote RSSI event not found. Expected {}", |
| "gatt_serv_disc_err": |
| "GATT Services Discovered event not found. Expected {}", |
| "serv_added_err": "Service Added event not found. Expected {}", |
| "mtu_changed_err": "MTU Changed event not found. Expected {}", |
| "mtu_serv_changed_err": "MTU Server Changed event not found. Expected {}", |
| "gatt_conn_changed_err": |
| "GATT Connection Changed event not found. Expected {}", |
| "char_change_err": |
| "GATT Characteristic Changed event not fond. Expected {}", |
| "phy_read_err": "Phy Read event not fond. Expected {}", |
| "phy_update_err": "Phy Update event not fond. Expected {}", |
| "exec_write_err": "GATT Execute Write event not found. Expected {}" |
| } |
| |
| # GATT callback strings as defined in GattClientFacade.java and |
| # GattServerFacade.java implemented callbacks. |
| gatt_cb_strings = { |
| "char_write_req": "GattServer{}onCharacteristicWriteRequest", |
| "exec_write": "GattServer{}onExecuteWrite", |
| "char_write": "GattConnect{}onCharacteristicWrite", |
| "desc_write_req": "GattServer{}onDescriptorWriteRequest", |
| "desc_write": "GattConnect{}onDescriptorWrite", |
| "char_read": "GattConnect{}onCharacteristicRead", |
| "char_read_req": "GattServer{}onCharacteristicReadRequest", |
| "desc_read": "GattConnect{}onDescriptorRead", |
| "desc_read_req": "GattServer{}onDescriptorReadRequest", |
| "rd_remote_rssi": "GattConnect{}onReadRemoteRssi", |
| "gatt_serv_disc": "GattConnect{}onServicesDiscovered", |
| "serv_added": "GattServer{}onServiceAdded", |
| "mtu_changed": "GattConnect{}onMtuChanged", |
| "mtu_serv_changed": "GattServer{}onMtuChanged", |
| "gatt_conn_change": "GattConnect{}onConnectionStateChange", |
| "char_change": "GattConnect{}onCharacteristicChanged", |
| "phy_read": "GattConnect{}onPhyRead", |
| "phy_update": "GattConnect{}onPhyUpdate", |
| "serv_phy_read": "GattServer{}onPhyRead", |
| "serv_phy_update": "GattServer{}onPhyUpdate", |
| } |
| |
| # GATT event dictionary of expected callbacks and errors. |
| gatt_event = { |
| "char_write_req": { |
| "evt": gatt_cb_strings["char_write_req"], |
| "err": gatt_cb_err["char_write_req_err"] |
| }, |
| "exec_write": { |
| "evt": gatt_cb_strings["exec_write"], |
| "err": gatt_cb_err["exec_write_err"] |
| }, |
| "char_write": { |
| "evt": gatt_cb_strings["char_write"], |
| "err": gatt_cb_err["char_write_err"] |
| }, |
| "desc_write_req": { |
| "evt": gatt_cb_strings["desc_write_req"], |
| "err": gatt_cb_err["desc_write_req_err"] |
| }, |
| "desc_write": { |
| "evt": gatt_cb_strings["desc_write"], |
| "err": gatt_cb_err["desc_write_err"] |
| }, |
| "char_read": { |
| "evt": gatt_cb_strings["char_read"], |
| "err": gatt_cb_err["char_read_err"] |
| }, |
| "char_read_req": { |
| "evt": gatt_cb_strings["char_read_req"], |
| "err": gatt_cb_err["char_read_req_err"] |
| }, |
| "desc_read": { |
| "evt": gatt_cb_strings["desc_read"], |
| "err": gatt_cb_err["desc_read_err"] |
| }, |
| "desc_read_req": { |
| "evt": gatt_cb_strings["desc_read_req"], |
| "err": gatt_cb_err["desc_read_req_err"] |
| }, |
| "rd_remote_rssi": { |
| "evt": gatt_cb_strings["rd_remote_rssi"], |
| "err": gatt_cb_err["rd_remote_rssi_err"] |
| }, |
| "gatt_serv_disc": { |
| "evt": gatt_cb_strings["gatt_serv_disc"], |
| "err": gatt_cb_err["gatt_serv_disc_err"] |
| }, |
| "serv_added": { |
| "evt": gatt_cb_strings["serv_added"], |
| "err": gatt_cb_err["serv_added_err"] |
| }, |
| "mtu_changed": { |
| "evt": gatt_cb_strings["mtu_changed"], |
| "err": gatt_cb_err["mtu_changed_err"] |
| }, |
| "gatt_conn_change": { |
| "evt": gatt_cb_strings["gatt_conn_change"], |
| "err": gatt_cb_err["gatt_conn_changed_err"] |
| }, |
| "char_change": { |
| "evt": gatt_cb_strings["char_change"], |
| "err": gatt_cb_err["char_change_err"] |
| }, |
| "phy_read": { |
| "evt": gatt_cb_strings["phy_read"], |
| "err": gatt_cb_err["phy_read_err"] |
| }, |
| "phy_update": { |
| "evt": gatt_cb_strings["phy_update"], |
| "err": gatt_cb_err["phy_update_err"] |
| }, |
| "serv_phy_read": { |
| "evt": gatt_cb_strings["serv_phy_read"], |
| "err": gatt_cb_err["phy_read_err"] |
| }, |
| "serv_phy_update": { |
| "evt": gatt_cb_strings["serv_phy_update"], |
| "err": gatt_cb_err["phy_update_err"] |
| } |
| } |
| |
| # Matches constants of connection states defined in BluetoothGatt.java |
| gatt_connection_state = { |
| "disconnected": 0, |
| "connecting": 1, |
| "connected": 2, |
| "disconnecting": 3, |
| "closed": 4 |
| } |
| |
| # Matches constants of Bluetooth GATT Characteristic values as defined |
| # in BluetoothGattCharacteristic.java |
| gatt_characteristic = { |
| "property_broadcast": 0x01, |
| "property_read": 0x02, |
| "property_write_no_response": 0x04, |
| "property_write": 0x08, |
| "property_notify": 0x10, |
| "property_indicate": 0x20, |
| "property_signed_write": 0x40, |
| "property_extended_props": 0x80, |
| "permission_read": 0x01, |
| "permission_read_encrypted": 0x02, |
| "permission_read_encrypted_mitm": 0x04, |
| "permission_write": 0x10, |
| "permission_write_encrypted": 0x20, |
| "permission_write_encrypted_mitm": 0x40, |
| "permission_write_signed": 0x80, |
| "permission_write_signed_mitm": 0x100, |
| "write_type_default": 0x02, |
| "write_type_no_response": 0x01, |
| "write_type_signed": 0x04, |
| } |
| |
| # Matches constants of Bluetooth GATT Characteristic values as defined |
| # in BluetoothGattDescriptor.java |
| gatt_descriptor = { |
| "enable_notification_value": [0x01, 0x00], |
| "enable_indication_value": [0x02, 0x00], |
| "disable_notification_value": [0x00, 0x00], |
| "permission_read": 0x01, |
| "permission_read_encrypted": 0x02, |
| "permission_read_encrypted_mitm": 0x04, |
| "permission_write": 0x10, |
| "permission_write_encrypted": 0x20, |
| "permission_write_encrypted_mitm": 0x40, |
| "permission_write_signed": 0x80, |
| "permission_write_signed_mitm": 0x100 |
| } |
| |
| # https://www.bluetooth.com/specifications/gatt/descriptors |
| gatt_char_desc_uuids = { |
| "char_ext_props": '00002900-0000-1000-8000-00805f9b34fb', |
| "char_user_desc": '00002901-0000-1000-8000-00805f9b34fb', |
| "client_char_cfg": '00002902-0000-1000-8000-00805f9b34fb', |
| "server_char_cfg": '00002903-0000-1000-8000-00805f9b34fb', |
| "char_fmt_uuid": '00002904-0000-1000-8000-00805f9b34fb', |
| "char_agreg_fmt": '00002905-0000-1000-8000-00805f9b34fb', |
| "char_valid_range": '00002906-0000-1000-8000-00805f9b34fb', |
| "external_report_reference": '00002907-0000-1000-8000-00805f9b34fb', |
| "report_reference": '00002908-0000-1000-8000-00805f9b34fb' |
| } |
| |
| # https://www.bluetooth.com/specifications/gatt/characteristics |
| gatt_char_types = { |
| "device_name": '00002a00-0000-1000-8000-00805f9b34fb', |
| "appearance": '00002a01-0000-1000-8000-00805f9b34fb', |
| "peripheral_priv_flag": '00002a02-0000-1000-8000-00805f9b34fb', |
| "reconnection_address": '00002a03-0000-1000-8000-00805f9b34fb', |
| "peripheral_pref_conn": '00002a04-0000-1000-8000-00805f9b34fb', |
| "service_changed": '00002a05-0000-1000-8000-00805f9b34fb', |
| "system_id": '00002a23-0000-1000-8000-00805f9b34fb', |
| "model_number_string": '00002a24-0000-1000-8000-00805f9b34fb', |
| "serial_number_string": '00002a25-0000-1000-8000-00805f9b34fb', |
| "firmware_revision_string": '00002a26-0000-1000-8000-00805f9b34fb', |
| "hardware_revision_string": '00002a27-0000-1000-8000-00805f9b34fb', |
| "software_revision_string": '00002a28-0000-1000-8000-00805f9b34fb', |
| "manufacturer_name_string": '00002a29-0000-1000-8000-00805f9b34fb', |
| "pnp_id": '00002a50-0000-1000-8000-00805f9b34fb', |
| } |
| |
| # Matches constants of Bluetooth GATT Characteristic values as defined |
| # in BluetoothGattCharacteristic.java |
| gatt_characteristic_value_format = { |
| "string": 0x1, |
| "byte": 0x2, |
| "sint8": 0x21, |
| "uint8": 0x11, |
| "sint16": 0x22, |
| "unit16": 0x12, |
| "sint32": 0x24, |
| "uint32": 0x14 |
| } |
| |
| # Matches constants of Bluetooth Gatt Service types as defined in |
| # BluetoothGattService.java |
| gatt_service_types = {"primary": 0, "secondary": 1} |
| |
| # Matches constants of Bluetooth Gatt Connection Priority values as defined in |
| # BluetoothGatt.java |
| gatt_connection_priority = {"balanced": 0, "high": 1, "low_power": 2} |
| |
| # Min and max MTU values |
| gatt_mtu_size = {"min": 23, "max": 217} |
| |
| # Gatt Characteristic attribute lengths |
| gatt_characteristic_attr_length = {"attr_1": 1, "attr_2": 3, "attr_3": 15} |
| |
| # Matches constants of Bluetooth Gatt operations status as defined in |
| # BluetoothGatt.java |
| gatt_status = {"success": 0, "failure": 0x101} |
| |
| # Matches constants of Bluetooth transport values as defined in |
| # BluetoothDevice.java |
| gatt_transport = {"auto": 0x00, "bredr": 0x01, "le": 0x02} |
| |
| # Matches constants of Bluetooth physical channeling values as defined in |
| # BluetoothDevice.java |
| gatt_phy = {"1m": 1, "2m": 2, "le_coded": 3} |
| |
| # Matches constants of Bluetooth physical channeling bitmask values as defined |
| # in BluetoothDevice.java |
| gatt_phy_mask = {"1m_mask": 1, "2m_mask": 2, "coded_mask": 4} |
| |
| # Values as defiend in the Bluetooth GATT specification |
| gatt_server_responses = { |
| "GATT_SUCCESS": 0x0, |
| "GATT_FAILURE": 0x1, |
| "GATT_READ_NOT_PERMITTED": 0x2, |
| "GATT_WRITE_NOT_PERMITTED": 0x3, |
| "GATT_INVALID_PDU": 0x4, |
| "GATT_INSUFFICIENT_AUTHENTICATION": 0x5, |
| "GATT_REQUEST_NOT_SUPPORTED": 0x6, |
| "GATT_INVALID_OFFSET": 0x7, |
| "GATT_INSUFFICIENT_AUTHORIZATION": 0x8, |
| "GATT_INVALID_ATTRIBUTE_LENGTH": 0xd, |
| "GATT_INSUFFICIENT_ENCRYPTION": 0xf, |
| "GATT_CONNECTION_CONGESTED": 0x8f, |
| "GATT_13_ERR": 0x13, |
| "GATT_12_ERR": 0x12, |
| "GATT_0C_ERR": 0x0C, |
| "GATT_16": 0x16 |
| } |
| |
| ### Bluetooth GATT Constants End ### |
| |
| ### Chameleon Constants Begin ### |
| |
| # Chameleon audio bits per sample. |
| audio_bits_per_sample_16 = 16 |
| audio_bits_per_sample_24 = 24 |
| audio_bits_per_sample_32 = 32 |
| |
| # Chameleon audio sample rates. |
| audio_sample_rate_44100 = 44100 |
| audio_sample_rate_48000 = 48000 |
| audio_sample_rate_88200 = 88200 |
| audio_sample_rate_96000 = 96000 |
| |
| # Chameleon audio channel modes. |
| audio_channel_mode_mono = 1 |
| audio_channel_mode_stereo = 2 |
| audio_channel_mode_8 = 8 |
| |
| # Chameleon time delays. |
| delay_after_binding_seconds = 0.5 |
| delay_before_record_seconds = 0.5 |
| silence_wait_seconds = 5 |
| |
| # Chameleon bus endpoints. |
| fpga_linein_bus_endpoint = 'Chameleon FPGA line-in' |
| headphone_bus_endpoint = 'Cros device headphone' |
| |
| ### Chameleon Constants End ### |
| |
| # Begin logcat strings dict""" |
| logcat_strings = { |
| "media_playback_vol_changed": "onRouteVolumeChanged", |
| } |
| |
| # End logcat strings dict""" |
| |
| ### Begin Service Discovery UUIDS ### |
| # Values match the Bluetooth SIG defined values: """ |
| """ https://www.bluetooth.com/specifications/assigned-numbers/service-discovery """ |
| sig_uuid_constants = { |
| "BASE_UUID": "0000{}-0000-1000-8000-00805F9B34FB", |
| "SDP": "0001", |
| "UDP": "0002", |
| "RFCOMM": "0003", |
| "TCP": "0004", |
| "TCS-BIN": "0005", |
| "TCS-AT": "0006", |
| "ATT": "0007", |
| "OBEX": "0008", |
| "IP": "0009", |
| "FTP": "000A", |
| "HTTP": "000C", |
| "WSP": "000E", |
| "BNEP": "000F", |
| "UPNP": "0010", |
| "HIDP": "0011", |
| "HardcopyControlChannel": "0012", |
| "HardcopyDataChannel": "0014", |
| "HardcopyNotification": "0016", |
| "AVCTP": "0017", |
| "AVDTP": "0019", |
| "CMTP": "001B", |
| "MCAPControlChannel": "001E", |
| "MCAPDataChannel": "001F", |
| "L2CAP": "0100", |
| "ServiceDiscoveryServerServiceClassID": "1000", |
| "BrowseGroupDescriptorServiceClassID": "1001", |
| "SerialPort": "1101", |
| "LANAccessUsingPPP": "1102", |
| "DialupNetworking": "1103", |
| "IrMCSync": "1104", |
| "OBEXObjectPush": "1105", |
| "OBEXFileTransfer": "1106", |
| "IrMCSyncCommand": "1107", |
| "Headset": "1108", |
| "CordlessTelephony": "1109", |
| "AudioSource": "110A", |
| "AudioSink": "110B", |
| "A/V_RemoteControlTarget": "110C", |
| "AdvancedAudioDistribution": "110D", |
| "A/V_RemoteControl": "110E", |
| "A/V_RemoteControlController": "110F", |
| "Intercom": "1110", |
| "Fax": "1111", |
| "Headset - Audio Gateway (AG)": "1112", |
| "WAP": "1113", |
| "WAP_CLIENT": "1114", |
| "PANU": "1115", |
| "NAP": "1116", |
| "GN": "1117", |
| "DirectPrinting": "1118", |
| "ReferencePrinting": "1119", |
| "ImagingResponder": "111B", |
| "ImagingAutomaticArchive": "111C", |
| "ImagingReferencedObjects": "111D", |
| "Handsfree": "111E", |
| "HandsfreeAudioGateway": "111F", |
| "DirectPrintingReferenceObjectsService": "1120", |
| "ReflectedUI": "1121", |
| "BasicPrinting": "1122", |
| "PrintingStatus": "1123", |
| "HumanInterfaceDeviceService": "1124", |
| "HardcopyCableReplacement": "1125", |
| "HCR_Print": "1126", |
| "HCR_Scan": "1127", |
| "Common_ISDN_Access": "1128", |
| "SIM_Access": "112D", |
| "Phonebook Access - PCE": "112E", |
| "Phonebook Access - PSE": "112F", |
| "Phonebook Access": "1130", |
| "Headset - HS": "1131", |
| "Message Access Server": "1132", |
| "Message Notification Server": "1133", |
| "Message Access Profile": "1134", |
| "GNSS": "1135", |
| "GNSS_Server": "1136", |
| "PnPInformation": "1200", |
| "GenericNetworking": "1201", |
| "GenericFileTransfer": "1202", |
| "GenericAudio": "1203", |
| "GenericTelephony": "1204", |
| "UPNP_Service": "1205", |
| "UPNP_IP_Service": "1206", |
| "ESDP_UPNP_IP_PAN": "1300", |
| "ESDP_UPNP_IP_LAP": "1301", |
| "ESDP_UPNP_L2CAP": "1302", |
| "VideoSource": "1303", |
| "VideoSink": "1304", |
| "VideoDistribution": "1305", |
| "HDP": "1400" |
| } |
| |
| ### End Service Discovery UUIDS ### |
| |
| ### Begin Appearance Constants ### |
| # https://www.bluetooth.com/wp-content/uploads/Sitecore-Media-Library/Gatt/Xml/Characteristics/org.bluetooth.characteristic.gap.appearance.xml |
| sig_appearance_constants = { |
| "UNKNOWN": 0, |
| "PHONE": 64, |
| "COMPUTER": 128, |
| "WATCH": 192, |
| "WATCH_SPORTS": 193, |
| "CLOCK": 256, |
| "DISPLAY": 320, |
| "REMOTE_CONTROL": 384, |
| "EYE_GLASSES": 448, |
| "TAG": 512, |
| "KEYRING": 576, |
| "MEDIA_PLAYER": 640, |
| "BARCODE_SCANNER": 704, |
| "THERMOMETER": 768, |
| "THERMOMETER_EAR": 769, |
| "HEART_RATE_SENSOR": 832, |
| "HEART_RATE_SENSOR_BELT": 833, |
| "BLOOD_PRESSURE": 896, |
| "BLOOD_PRESSURE_ARM": 897, |
| "BLOOD_PRESSURE_WRIST": 898, |
| "HID": 960, |
| "HID_KEYBOARD": 961, |
| "HID_MOUSE": 962, |
| "HID_JOYSTICK": 963, |
| "HID_GAMEPAD": 964, |
| "HID_DIGITIZER_TABLET": 965, |
| "HID_CARD_READER": 966, |
| "HID_DIGITAL_PEN": 967, |
| "HID_BARCODE_SCANNER": 968, |
| "GLUCOSE_METER": 1024, |
| "RUNNING_WALKING_SENSOR": 1088, |
| "RUNNING_WALKING_SENSOR_IN_SHOE": 1089, |
| "RUNNING_WALKING_SENSOR_ON_SHOE": 1090, |
| "RUNNING_WALKING_SENSOR_ON_HIP": 1091, |
| "CYCLING": 1152, |
| "CYCLING_COMPUTER": 1153, |
| "CYCLING_SPEED_SENSOR": 1154, |
| "CYCLING_CADENCE_SENSOR": 1155, |
| "CYCLING_POWER_SENSOR": 1156, |
| "CYCLING_SPEED_AND_CADENCE_SENSOR": 1157, |
| "PULSE_OXIMETER": 3136, |
| "PULSE_OXIMETER_FINGERTIP": 3137, |
| "PULSE_OXIMETER_WRIST": 3138, |
| "WEIGHT_SCALE": 3200, |
| "PERSONAL_MOBILITY": 3264, |
| "PERSONAL_MOBILITY_WHEELCHAIR": 3265, |
| "PERSONAL_MOBILITY_SCOOTER": 3266, |
| "GLUCOSE_MONITOR": 3328, |
| "SPORTS_ACTIVITY": 5184, |
| "SPORTS_ACTIVITY_LOCATION_DISPLAY": 5185, |
| "SPORTS_ACTIVITY_LOCATION_AND_NAV_DISPLAY": 5186, |
| "SPORTS_ACTIVITY_LOCATION_POD": 5187, |
| "SPORTS_ACTIVITY_LOCATION_AND_NAV_POD": 5188, |
| } |
| |
| ### End Appearance Constants ### |
| |
| # Attribute Record values from the Bluetooth Specification |
| # Version 5, Vol 3, Part B |
| bt_attribute_values = { |
| 'ATTR_SERVICE_RECORD_HANDLE': 0x0000, |
| 'ATTR_SERVICE_CLASS_ID_LIST': 0x0001, |
| 'ATTR_SERVICE_RECORD_STATE': 0x0002, |
| 'ATTR_SERVICE_ID': 0x0003, |
| 'ATTR_PROTOCOL_DESCRIPTOR_LIST': 0x0004, |
| 'ATTR_ADDITIONAL_PROTOCOL_DESCRIPTOR_LIST': 0x000D, |
| 'ATTR_BROWSE_GROUP_LIST': 0x0005, |
| 'ATTR_LANGUAGE_BASE_ATTRIBUTE_ID_LIST': 0x0006, |
| 'ATTR_SERVICE_INFO_TIME_TO_LIVE': 0x0007, |
| 'ATTR_SERVICE_AVAILABILITY': 0x0008, |
| 'ATTR_BLUETOOTH_PROFILE_DESCRIPTOR_LIST': 0x0009, |
| 'ATTR_A2DP_SUPPORTED_FEATURES': 0x0311, |
| } |
