blob: ae26d91c3eb6b6c69dc1129eaee4d95b06e45c9c [file] [log] [blame]
#!/usr/bin/env python3
#
# Copyright 2016 - The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""
Test Script for Telephony Pre Check In Sanity
"""
import math
import time
from acts.test_decorators import test_tracker_info
from acts.controllers.anritsu_lib._anritsu_utils import AnritsuError
from acts.controllers.anritsu_lib.md8475a import CTCHSetup
from acts.controllers.anritsu_lib.md8475a import BtsBandwidth
from acts.controllers.anritsu_lib.md8475a import BtsPacketRate
from acts.controllers.anritsu_lib.md8475a import BtsServiceState
from acts.controllers.anritsu_lib.md8475a import MD8475A
from acts.controllers.anritsu_lib.mg3710a import MG3710A
from acts_contrib.test_utils.tel.anritsu_utils import LTE_BAND_2
from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_gsm
from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_lte
from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_lte_lte
from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_lte_wcdma
from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_wcdma
from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_wcdma_gsm
from acts_contrib.test_utils.tel.anritsu_utils import set_system_model_wcdma_wcdma
from acts_contrib.test_utils.tel.anritsu_utils import set_usim_parameters
from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_CDMA
from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_GSM_ONLY
from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_GSM_UMTS
from acts_contrib.test_utils.tel.tel_defines import NETWORK_MODE_LTE_GSM_WCDMA
from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_CDMA2000
from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_GSM
from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_LTE
from acts_contrib.test_utils.tel.tel_defines import RAT_FAMILY_UMTS
from acts_contrib.test_utils.tel.tel_phone_setup_utils import ensure_network_rat
from acts_contrib.test_utils.tel.tel_phone_setup_utils import ensure_phones_idle
from acts_contrib.test_utils.tel.tel_test_utils import toggle_airplane_mode
from acts_contrib.test_utils.tel.TelephonyBaseTest import TelephonyBaseTest
from acts.controllers.anritsu_lib.cell_configurations import \
gsm_band850_ch128_fr869_cid58_cell
from acts.controllers.anritsu_lib.cell_configurations import \
gsm_band850_ch251_fr893_cid59_cell
from acts.controllers.anritsu_lib.cell_configurations import \
gsm_band1900_ch512_fr1930_cid51_cell
from acts.controllers.anritsu_lib.cell_configurations import \
gsm_band1900_ch512_fr1930_cid52_cell
from acts.controllers.anritsu_lib.cell_configurations import \
gsm_band1900_ch512_fr1930_cid53_cell
from acts.controllers.anritsu_lib.cell_configurations import \
gsm_band1900_ch512_fr1930_cid54_cell
from acts.controllers.anritsu_lib.cell_configurations import \
gsm_band1900_ch640_fr1955_cid56_cell
from acts.controllers.anritsu_lib.cell_configurations import \
gsm_band1900_ch750_fr1977_cid57_cell
from acts.controllers.anritsu_lib.cell_configurations import \
lte_band2_ch900_fr1960_pcid9_cell
from acts.controllers.anritsu_lib.cell_configurations import \
lte_band4_ch2000_fr2115_pcid1_cell
from acts.controllers.anritsu_lib.cell_configurations import \
lte_band4_ch2000_fr2115_pcid2_cell
from acts.controllers.anritsu_lib.cell_configurations import \
lte_band4_ch2000_fr2115_pcid3_cell
from acts.controllers.anritsu_lib.cell_configurations import \
lte_band4_ch2000_fr2115_pcid4_cell
from acts.controllers.anritsu_lib.cell_configurations import \
lte_band4_ch2050_fr2120_pcid7_cell
from acts.controllers.anritsu_lib.cell_configurations import \
lte_band4_ch2050_fr2120_pcid7_cell
from acts.controllers.anritsu_lib.cell_configurations import \
lte_band4_ch2250_fr2140_pcid8_cell
from acts.controllers.anritsu_lib.cell_configurations import \
lte_band12_ch5095_fr737_pcid10_cell
from acts.controllers.anritsu_lib.cell_configurations import \
wcdma_band1_ch10700_fr2140_cid31_cell
from acts.controllers.anritsu_lib.cell_configurations import \
wcdma_band1_ch10700_fr2140_cid32_cell
from acts.controllers.anritsu_lib.cell_configurations import \
wcdma_band1_ch10700_fr2140_cid33_cell
from acts.controllers.anritsu_lib.cell_configurations import \
wcdma_band1_ch10700_fr2140_cid34_cell
from acts.controllers.anritsu_lib.cell_configurations import \
wcdma_band1_ch10575_fr2115_cid36_cell
from acts.controllers.anritsu_lib.cell_configurations import \
wcdma_band1_ch10800_fr2160_cid37_cell
from acts.controllers.anritsu_lib.cell_configurations import \
wcdma_band2_ch9800_fr1960_cid38_cell
from acts.controllers.anritsu_lib.cell_configurations import \
wcdma_band2_ch9900_fr1980_cid39_cell
class TelLabNeighborCellTest(TelephonyBaseTest):
# This is the default offset between CallBox Power Level and Phone measure
# Power Level.
# TODO: Probably need to further tune those values.
_LTE_RSSI_OFFSET = -39
_WCDMA_RSSI_OFFSET = -31
_GSM_RSSI_OFFSET = -30
_ANRITSU_SETTLING_TIME = 15
_SETTLING_TIME = 75
_LTE_MCS_DL = 5
_LTE_MCS_UL = 5
_NRB_DL = 50
_NRB_UL = 50
_CELL_PARAM_FILE = 'C:\\MX847570\\CellParam\\NEIGHBOR_CELL_TEST_TMO.wnscp'
# Below are keys should be included in expected cell info.
# TARGET_RSSI: This is expected RSSI.
TARGET_RSSI = 'target_rssi'
# MAX_ERROR_RSSI: This is max error between 'each sample of reported RSSI'
# and 'expected RSSI'
MAX_ERROR_RSSI = 'max_error_rssi'
# MAX_ERROR_AVERAGE_RSSI: This is max error between
# 'average value of reported RSSI' and 'expected RSSI'
MAX_ERROR_AVERAGE_RSSI = 'max_error_average_rssi'
# REPORT_RATE: expected report rate for neighbor cell.
REPORT_RATE = 'report_rate'
# RAT: expected network rat.
RAT = 'rat'
# IS_REGISTERED: is the cell registered.
# For serving cell, this value should be True; for neighbor cell, should be
# False
IS_REGISTERED = 'registered'
# CID: cell CID info.
CID = 'cid'
# PCID: cell PCID info.
PCID = 'pcid'
# PSC: cell PSC info.
PSC = 'psc'
# Keys for calculate average RSSI. Only used in _verify_cell_info
RSSI = 'rssi'
COUNT = 'count'
# Pre-defined invalid value. If this value is reported in cell info, just
# discard this value. E.g. if in reported cell info, cid is reported as
# 0x7fffffff, need to discard this value when calculating unique_id
INVALID_VALUE = 0x7fffffff
def setup_class(self):
super().setup_class()
self.ad = self.android_devices[0]
self.ad.sim_card = getattr(self.ad, "sim_card", None)
self.md8475a_ip_address = self.user_params[
"anritsu_md8475a_ip_address"]
self.mg3710a_ip_address = self.user_params[
"anritsu_mg3710a_ip_address"]
self.wlan_option = self.user_params.get("anritsu_wlan_option", False)
self.md8475_version = self.user_params.get("md8475", "A")
if "lte_rssi_offset" in self.user_params:
self._LTE_RSSI_OFFSET = int(self.user_params["lte_rssi_offset"])
if "wcdma_rssi_offset" in self.user_params:
self._WCDMA_RSSI_OFFSET = int(self.user_params[
"wcdma_rssi_offset"])
if "gsm_rssi_offset" in self.user_params:
self._GSM_RSSI_OFFSET = int(self.user_params["gsm_rssi_offset"])
self.md8475a = None
self.mg3710a = None
try:
self.md8475a = MD8475A(self.md8475a_ip_address, self.wlan_option,
self.md8475_version)
except AnritsuError as e:
self.log.error("Error in connecting to Anritsu MD8475A:{}".format(
e))
return False
try:
self.mg3710a = MG3710A(self.mg3710a_ip_address)
except AnritsuError as e:
self.log.error("Error in connecting to Anritsu MG3710A :{}".format(
e))
return False
return True
def setup_test(self):
self.turn_off_3710a_sg(1)
self.turn_off_3710a_sg(2)
self.mg3710a.set_arb_pattern_aorb_state("A", "OFF", 1)
self.mg3710a.set_arb_pattern_aorb_state("B", "OFF", 1)
self.mg3710a.set_arb_pattern_aorb_state("A", "OFF", 2)
self.mg3710a.set_arb_pattern_aorb_state("B", "OFF", 2)
self.mg3710a.set_freq_relative_display_status("OFF", 1)
self.mg3710a.set_freq_relative_display_status("OFF", 2)
self.ad.droid.telephonySetPreferredNetworkTypes(
NETWORK_MODE_LTE_GSM_WCDMA)
ensure_phones_idle(self.log, self.android_devices)
toggle_airplane_mode(self.log, self.ad, True)
self.ad.droid.telephonyToggleDataConnection(True)
self.ad.adb.shell("setprop net.lte.ims.volte.provisioned 1",
ignore_status=True)
return True
def teardown_test(self):
toggle_airplane_mode(self.log, self.ad, True)
self.turn_off_3710a_sg(1)
self.turn_off_3710a_sg(2)
self.log.info("Stopping Simulation")
self.md8475a.stop_simulation()
return True
def teardown_class(self):
if self.md8475a is not None:
self.md8475a.disconnect()
if self.mg3710a is not None:
self.mg3710a.disconnect()
return True
def _setup_lte_serving_cell(self, bts, dl_power, cell_id, physical_cellid):
bts.output_level = dl_power
bts.bandwidth = BtsBandwidth.LTE_BANDWIDTH_10MHz
bts.packet_rate = BtsPacketRate.LTE_MANUAL
bts.lte_mcs_dl = self._LTE_MCS_DL
bts.lte_mcs_ul = self._LTE_MCS_UL
bts.nrb_dl = self._NRB_DL
bts.nrb_ul = self._NRB_UL
bts.cell_id = cell_id
bts.physical_cellid = physical_cellid
bts.neighbor_cell_mode = "DEFAULT"
def _setup_lte_neighbhor_cell_md8475a(self, bts, band, dl_power, cell_id,
physical_cellid):
bts.output_level = dl_power
bts.band = band
bts.bandwidth = BtsBandwidth.LTE_BANDWIDTH_10MHz
bts.cell_id = cell_id
bts.physical_cellid = physical_cellid
bts.neighbor_cell_mode = "DEFAULT"
bts.packet_rate = BtsPacketRate.LTE_MANUAL
bts.lte_mcs_dl = self._LTE_MCS_DL
bts.lte_mcs_ul = self._LTE_MCS_UL
bts.nrb_dl = self._NRB_DL
bts.nrb_ul = self._NRB_UL
def _setup_wcdma_serving_cell(self, bts, dl_power, cell_id):
bts.output_level = dl_power
bts.cell_id = cell_id
bts.neighbor_cell_mode = "DEFAULT"
def _setup_wcdma_neighbhor_cell_md8475a(self, bts, band, dl_power,
cell_id):
bts.output_level = dl_power
bts.band = band
bts.cell_id = cell_id
bts.neighbor_cell_mode = "DEFAULT"
def _setup_lte_cell_md8475a(self, bts, params, dl_power):
bts.output_level = dl_power
bts.band = params['band']
bts.bandwidth = params['bandwidth']
bts.cell_id = params['cid']
bts.physical_cellid = params['pcid']
bts.mcc = params['mcc']
bts.mnc = params['mnc']
bts.tac = params['tac']
bts.neighbor_cell_mode = "DEFAULT"
bts.dl_channel = params['channel']
bts.packet_rate = BtsPacketRate.LTE_MANUAL
bts.lte_mcs_dl = self._LTE_MCS_DL
bts.lte_mcs_ul = self._LTE_MCS_UL
bts.nrb_dl = self._NRB_DL
bts.nrb_ul = self._NRB_UL
def _setup_wcdma_cell_md8475a(self, bts, params, dl_power):
bts.output_level = dl_power
bts.band = params['band']
bts.cell_id = params['cid']
bts.mcc = params['mcc']
bts.mnc = params['mnc']
bts.lac = params['lac']
bts.rac = params['rac']
bts.neighbor_cell_mode = "DEFAULT"
bts.primary_scrambling_code = params['psc']
bts.dl_channel = params['channel']
def _setup_gsm_cell_md8475a(self, bts, params, dl_power):
bts.output_level = params['power']
bts.band = params['band']
bts.cell_id = params['cid']
bts.mcc = params['mcc']
bts.mnc = params['mnc']
bts.lac = params['lac']
bts.rac = params['rac']
bts.neighbor_cell_mode = "DEFAULT"
def setup_3710a_waveform(self, sg_number, memory, frequency, power_level,
wave_package_name, wave_pattern_name):
self.mg3710a.set_frequency(frequency, sg_number)
self.mg3710a.set_arb_state("ON", sg_number)
self.mg3710a.set_arb_combination_mode("EDIT", sg_number)
self.mg3710a.select_waveform(wave_package_name, wave_pattern_name,
memory, sg_number)
self.mg3710a.set_arb_pattern_aorb_state(memory, "ON", sg_number)
self.mg3710a.set_arb_level_aorb(memory, power_level, sg_number)
def turn_on_3710a_sg(self, sg_number):
self.mg3710a.set_modulation_state("ON", sg_number)
self.mg3710a.set_rf_output_state("ON", sg_number)
def turn_off_3710a_sg(self, sg_number):
self.mg3710a.set_modulation_state("OFF", sg_number)
self.mg3710a.set_rf_output_state("OFF", sg_number)
def _is_matching_cell(self, expected_cell_info, input_cell_info):
"""Return if 'input_cell_info' matches 'expected_cell_info'.
Args:
expected_cell_info: expected cell info. (dictionary)
input_cell_info: input cell info to test. (dictionary)
Returns:
True if:
for each key in key_list, if key exist in expected_cell_info,
it should also exist in input_cell_info, and the values should
equal in expected_cell_info and input_cell_info
False otherwise.
"""
for key in [
self.CID, self.PCID, self.RAT, self.PSC, self.IS_REGISTERED
]:
if key in expected_cell_info:
if key not in input_cell_info:
return False
if input_cell_info[key] != expected_cell_info[key]:
return False
return True
def _unique_cell_id(self, input_cell_info):
"""Get the unique id for cell_info, based on cid, pcid, rat, psc and
is_registered.
Args:
input_cell_info: cell info to get unique id.
Returns:
unique id (string)
"""
unique_id = ""
for key in [
self.CID, self.PCID, self.RAT, self.PSC, self.IS_REGISTERED
]:
if key in input_cell_info:
if input_cell_info[key] != self.INVALID_VALUE:
unique_id += key + ":" + str(input_cell_info[key]) + ":"
return unique_id
def _get_rssi_from_cell_info(self, cell_info):
"""Return the RSSI value reported in cell_info.
Args:
cell_info: cell info to get RSSI.
Returns:
RSSI reported in this cell info.
"""
rat_to_rssi_tbl = {
'lte': 'rsrp',
'wcdma': 'signal_strength',
'gsm': 'signal_strength'
}
try:
return cell_info[rat_to_rssi_tbl[cell_info[self.RAT]]]
except KeyError:
return None
def _is_rssi_in_expected_range(self, actual_rssi, expected_rssi,
max_error):
"""Return if actual_rssi is within expected range.
Args:
actual_rssi: the rssi value to test.
expected_rssi: expected rssi value.
max_error: max error.
Returns:
if the difference between actual_rssi and expected_rssi is within
max_error, return True. Otherwise False.
"""
if abs(actual_rssi - expected_rssi) > max_error:
self.log.error(
"Expected RSSI: {}, max error: {}, reported RSSI: {}".format(
expected_rssi, max_error, actual_rssi))
return False
else:
return True
def _verify_cell_info(self,
ad,
expected_cell_info_stats,
number_of_sample=10,
delay_each_sample=5):
"""Return if reported cell info from ad matches expected_cell_info_stats
or not.
Args:
ad: android device object.
expected_cell_info_stats: expected cell info list.
number_of_sample: number of sample to take from DUT.
delay_each_sample: time delay between each sample.
Returns:
True if reported cell info matches with expected_cell_info_stats.
False otherwise.
"""
cell_info_stats = {}
for index in range(number_of_sample):
info_list = ad.droid.telephonyGetAllCellInfo()
self.log.info("Received Cell Info List: {}".format(info_list))
for sample in info_list:
rssi = self._get_rssi_from_cell_info(sample)
unique_id = self._unique_cell_id(sample)
# check cell logic
if not unique_id in expected_cell_info_stats:
self.log.error("Found unexpected cell!")
return False
elif not self._is_matching_cell(
expected_cell_info_stats[unique_id], sample):
self.log.error("Mismatched Cell Info")
return False
# Check RSSI within expected range
if not self._is_rssi_in_expected_range(
self._get_rssi_from_cell_info(sample),
expected_cell_info_stats[unique_id][self.TARGET_RSSI],
expected_cell_info_stats[unique_id][
self.MAX_ERROR_RSSI]):
self.log.error("Cell Info: {}. Cell RSSI not" +
" in expected range".format(sample))
return False
if unique_id not in cell_info_stats:
cell_info_stats[unique_id] = {self.RSSI: 0, self.COUNT: 0}
cell_info_stats[unique_id][self.RSSI] += rssi
cell_info_stats[unique_id][self.COUNT] += 1
time.sleep(delay_each_sample)
try:
for unique_id in expected_cell_info_stats.keys():
expected_cell_info = expected_cell_info_stats[unique_id]
expected_number_of_sample_reported = math.floor(
expected_cell_info[self.REPORT_RATE] * number_of_sample)
if cell_info_stats[unique_id][
self.COUNT] < expected_number_of_sample_reported:
self.log.error(
"Insufficient reports {}/{} for {}, expected: {}",
expected_cell_info[unique_id][self.COUNT],
number_of_sample, expected_cell_info,
expected_number_of_sample_reported)
return False
average_rssi = cell_info_stats[unique_id][self.RSSI] / \
cell_info_stats[unique_id][self.COUNT]
# Check Average RSSI within expected range
if not self._is_rssi_in_expected_range(
average_rssi, expected_cell_info[self.TARGET_RSSI],
expected_cell_info[self.MAX_ERROR_AVERAGE_RSSI]):
self.log.error("Cell Average RSSI not in expected range.")
return False
except KeyError as unique_id:
self.log.error("Failed to find key {}".format(unique_id))
self.log.error("Expected cell info not reported {}.".format(
expected_cell_info))
return False
return True
def lte_intra_freq_ncell(self,
ad,
pcid_list,
init_pwr,
power_seq,
interval=3,
err_margin=1):
"""Return True if UE measured RSSI follows the powers in BTS simulator
Args:
ad: android device object.
pcid: list of PCID of LTE BTS
init_pwr: initial downlinl power in dBm for serving and neighbor cell
power_seq: power change sequence in dB.
interval: time delay in seocnd between each power change.
error_margin: error margin in dB to determine measurement pass or fail
Returns:
True if all measurments are within margin.
False otherwise.
"""
bts = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_serving_cell(bts[0], init_pwr, pcid_list[0],
pcid_list[0])
self._setup_lte_neighbhor_cell_md8475a(bts[1], LTE_BAND_2, init_pwr,
pcid_list[1], pcid_list[1])
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.send_command("IMSSTARTVN 1")
self.md8475a.start_simulation()
bts[1].service_state = BtsServiceState.SERVICE_STATE_OUT
self.ad.droid.telephonyToggleDataConnection(True)
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(1)
bts[1].service_state = BtsServiceState.SERVICE_STATE_IN
n_bts = len(pcid_list) # number of total BTS
if n_bts >= 3:
self.setup_3710a_waveform("1", "A", "1960MHZ", init_pwr, "LTE",
"10M_B1_CID2")
self.turn_on_3710a_sg(1)
if n_bts == 4:
self.setup_3710a_waveform("1", "B", "1960MHZ", init_pwr, "LTE",
"10M_B1_CID3")
self.log.info("Wait for {} seconds to settle".format(
self._ANRITSU_SETTLING_TIME))
time.sleep(self._ANRITSU_SETTLING_TIME)
cell_list = ad.droid.telephonyGetAllCellInfo()
self.log.info("Received Cell Info List: {}".format(cell_list))
init_rsrp_list = []
for pcid in pcid_list:
for cell in cell_list:
if cell['pcid'] == pcid:
init_rsrp_list.append(cell['rsrp'])
break
self.log.info("init_rsrp_list = {}".format(init_rsrp_list))
error_seq = []
for power in power_seq:
self.log.info("power = {}".format(power))
for i in range(2):
bts[i].output_level = init_pwr + power[i]
if n_bts >= 3:
self.mg3710a.set_arb_level_aorb("A", init_pwr + power[2], "1")
if n_bts == 4:
self.mg3710a.set_arb_level_aorb("B", init_pwr + power[2], "1")
time.sleep(interval)
cell_list = ad.droid.telephonyGetAllCellInfo()
delta = []
error = []
for pcid, init_rsrp, pwr in zip(pcid_list, init_rsrp_list, power):
found = False
for cell in cell_list:
if cell['pcid'] == pcid:
found = True
self.log.info("pcid {}, rsrp = {}".format(pcid, cell[
'rsrp']))
delta.append(cell['rsrp'] - init_rsrp)
error.append(cell['rsrp'] - init_rsrp - pwr)
if not found:
self.log.info("pcid {} not found!".format(pcid))
delta.append(-99)
error.append(-99)
self.log.info("delta = {}".format(delta))
self.log.info("error = {}".format(error))
error_seq.append(error)
self.log.info("error_seq = {}".format(error_seq))
for error in error_seq:
for err in error:
if err != -99 and abs(err) > err_margin:
self.log.error(
"Test failed! Measured power error is greater than margin."
)
return False
return True
""" Tests Begin """
@test_tracker_info(uuid="17a42861-abb5-480b-9139-89219fa304b2")
@TelephonyBaseTest.tel_test_wrap
def test_2lte_intra_freq_ncell_away_close(self):
""" Test phone moving away from Neighbor Intra Freq cell then
close back while serving cell stays the same power
Setup a two LTE cell configuration on MD8475A
Make Sure Phone is in LTE mode
Verify the reported RSSI follows the DL power change in MD8475A
Returns:
True if pass; False if fail
"""
pcid = [0, 1]
init_pwr = -30 # initial DL power for all cells
power_seq = [
[0, -1], # power change sequence reference to init_pwr
[0, -2],
[0, -3],
[0, -4],
[0, -3],
[0, -2],
[0, -1],
[0, 0],
[0, 1],
[0, 3],
[0, 4],
[0, 5],
[0, 6],
[0, 7],
[0, 8],
[0, 9],
[0, 10],
[0, 9],
[0, 8],
[0, 7],
[0, 6],
[0, 5],
[0, 4],
[0, 3],
[0, 2],
[0, 1],
[0, 0]
]
return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq)
@test_tracker_info(uuid="117f404b-fb78-474a-86ba-209e6a54c9a8")
@TelephonyBaseTest.tel_test_wrap
def test_2lte_intra_freq_scell_away_close(self):
""" Test phone moving away from serving cell then close back while
neighbor Intra Freq cell stays the same power
Setup a two LTE cell configuration on MD8475A
Make Sure Phone is in LTE mode
Verify the reported RSSI follows the DL power change in MD8475A
Returns:
True if pass; False if fail
"""
pcid = [0, 1]
init_pwr = -30 # initial DL power for all cells
power_seq = [
[-1, 0], # power change sequence reference to init_pwr
[-2, 0],
[-3, 0],
[-4, 0],
[-5, 0],
[-6, 0],
[-7, 0],
[-8, 0],
[-9, 0],
[-10, 0],
[-9, 0],
[-8, 0],
[-7, 0],
[-6, 0],
[-5, 0],
[-4, 0],
[-3, 0],
[-2, 0],
[-1, 0],
[0, 0],
[1, 0],
[2, 0],
[3, 0],
[4, 0],
[3, 0],
[2, 0],
[1, 0],
[0, 0]
]
return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq)
@test_tracker_info(uuid="d1eec95f-40e9-4099-a669-9a88e56049ca")
@TelephonyBaseTest.tel_test_wrap
def test_2lte_intra_freq_ncell_away_close_2(self):
""" Test phone moving away from serving cell and close to neighbor
Intra Freq cell, then back and forth
Setup a two LTE cell configuration on MD8475A
Make Sure Phone is in LTE mode
Verify the reported RSSI follows the DL power change in MD8475A
Returns:
True if pass; False if fail
"""
pcid = [0, 1]
init_pwr = -30 # initial DL power for all cells
power_seq = [
[-1, 1], # power change sequence reference to init_pwr
[-2, 2],
[-3, 3],
[-4, 4],
[-5, 5],
[-4, 4],
[-3, 3],
[-2, 2],
[-1, 1],
[-0, 0],
[1, -1],
[2, -2],
[1, -1],
[0, 0]
]
return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq)
@test_tracker_info(uuid="c642a85b-4970-429c-81c4-f635392879be")
@TelephonyBaseTest.tel_test_wrap
def test_2lte_intra_freq_2cell_synced(self):
""" Test phone moving away and back to both serving cell and neighbor
Intra Freq cell
Setup a two LTE cell configuration on MD8475A
Make Sure Phone is in LTE mode
Verify the reported RSSI follows the DL power change in MD8475A and MG3710A
Returns:
True if pass; False if fail
"""
pcid = [0, 1]
init_pwr = -30 # initial DL power for all cells
power_seq = [
[-1, -1], # power change sequence reference to init_pwr
[-3, -3],
[-5, -5],
[-7, -7],
[-5, -5],
[-3, -3],
[-1, -1],
[1, 1],
[3, 3],
[5, 5],
[7, 7],
[3, 3],
[0, 0]
]
return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq)
@test_tracker_info(uuid="9144fab6-c7e1-4de2-a01d-7a15c117ec70")
@TelephonyBaseTest.tel_test_wrap
def test_3lte_intra_freq_scell_reversed(self):
""" Test phone moving away and back between 2 neighbor cells while maintain
same rssi with serving cell
Setup a two LTE cell configuration on MD8475A
Make Sure Phone is in LTE mode
Verify the reported RSSI follows the DL power change in MD8475A and MG3710A
Returns:
True if pass; False if fail
"""
pcid = [0, 1, 2]
init_pwr = -30 # initial DL power for all cells
power_seq = [
[0, 1, -1], # power change sequence reference to init_pwr
[0, 2, -2],
[0, 3, -3],
[0, 4, -4],
[0, 3, -3],
[0, 2, -2],
[0, 1, -1],
[0, 0, 0],
[0, -1, 1],
[0, -2, 2],
[0, -3, 3],
[0, -4, 4],
[0, -3, 3],
[0, -2, 2],
[0, -1, 1],
[0, 0, 0]
]
return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq)
@test_tracker_info(uuid="7bfbea72-e6fa-45ae-bf7e-b9b42063abe7")
@TelephonyBaseTest.tel_test_wrap
def test_3lte_intra_freq_3cell_synced(self):
""" Test phone moving away and back to both serving cell and neighbor
Intra Freq cell
Setup a two LTE cell configuration on MD8475A
Make Sure Phone is in LTE mode
Verify the reported RSSI follows the DL power change in MD8475A
Returns:
True if pass; False if fail
"""
pcid = [0, 1, 2]
init_pwr = -30 # initial DL power for all cells
power_seq = [
[-1, -1, -1], # power change sequence reference to init_pwr
[-3, -3, -3],
[-5, -5, -5],
[-7, -7, -7],
[-5, -5, -5],
[-3, -3, -3],
[-1, -1, -1],
[1, 1, 1],
[3, 3, 3],
[5, 5, 5],
[7, 7, 7],
[3, 3, 3],
[0, 0, 0]
]
return self.lte_intra_freq_ncell(self.ad, pcid, init_pwr, power_seq)
@test_tracker_info(uuid="b4577ae1-6435-4a15-9449-e02013dfb032")
@TelephonyBaseTest.tel_test_wrap
def test_ncells_intra_lte_0_cells(self):
""" Test Number of neighbor cells reported by Phone when no neighbor
cells are present (Phone camped on LTE)
Setup a single LTE cell configuration on MD8475A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell_cid = 11
serving_cell_pcid = 11
serving_cell_dlpower = -20
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell_cid,
self.PCID: serving_cell_pcid,
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + serving_cell_dlpower,
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
[bts1] = set_system_model_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_serving_cell(bts1, serving_cell_dlpower,
serving_cell_cid, serving_cell_pcid)
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="fe2cc07b-9676-41ab-b7ff-112d3ef84980")
@TelephonyBaseTest.tel_test_wrap
def test_ncells_intra_lte_1_cells(self):
""" Test Number of neighbor cells reported by Phone when one neighbor
cell is present (Phone camped on LTE)
Setup a two LTE cell configuration on MD8475A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell_cid = 11
serving_cell_pcid = 11
neigh_cell_cid = 22
neigh_cell_pcid = 22
serving_cell_dlpower = -20
neigh_cell_dlpower = -24
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell_cid,
self.PCID: serving_cell_pcid,
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + serving_cell_dlpower,
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PCID: neigh_cell_pcid,
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_dlpower,
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
[bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_serving_cell(bts1, serving_cell_dlpower,
serving_cell_cid, serving_cell_pcid)
self._setup_lte_neighbhor_cell_md8475a(bts2, LTE_BAND_2,
neigh_cell_dlpower,
neigh_cell_cid, neigh_cell_pcid)
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.send_command("IMSSTARTVN 1")
self.md8475a.start_simulation()
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
self.log.info("Wait for {} seconds to settle".format(
self._SETTLING_TIME))
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="8abc7903-4ea7-407a-946b-455d7f767c3e")
@TelephonyBaseTest.tel_test_wrap
def test_ncells_intra_lte_2_cells(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells are present (Phone camped on LTE)
Setup a two LTE cell configuration on MD8475A
Setup one waveform on MG3710A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell_cid = 11
serving_cell_pcid = 11
neigh_cell_1_cid = 22
neigh_cell_1_pcid = 22
neigh_cell_2_cid = 1
neigh_cell_2_pcid = 1
serving_cell_dlpower = -20
neigh_cell_1_dlpower = -24
neigh_cell_2_dlpower = -23
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell_cid,
self.PCID: serving_cell_pcid,
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + serving_cell_dlpower,
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PCID: neigh_cell_1_pcid,
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_1_dlpower,
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neigh_cell_2_pcid,
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_2_dlpower,
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
[bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_serving_cell(bts1, serving_cell_dlpower,
serving_cell_cid, serving_cell_pcid)
self._setup_lte_neighbhor_cell_md8475a(
bts2, LTE_BAND_2, neigh_cell_1_dlpower, neigh_cell_1_cid,
neigh_cell_1_pcid)
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
self.setup_3710a_waveform("1", "A", "1960MHZ", neigh_cell_2_dlpower,
"LTE", "10M_B1_CID1")
self.turn_on_3710a_sg(1)
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="623b3d16-bc48-4353-abc3-054ca6351a97")
@TelephonyBaseTest.tel_test_wrap
def test_ncells_intra_lte_3_cells(self):
""" Test Number of neighbor cells reported by Phone when three neighbor
cells are present (Phone camped on LTE)
Setup two LTE cell configuration on MD8475A
Setup two waveform on MG3710A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell_cid = 11
serving_cell_pcid = 11
neigh_cell_1_cid = 1
neigh_cell_1_pcid = 1
neigh_cell_2_cid = 2
neigh_cell_2_pcid = 2
neigh_cell_3_cid = 3
neigh_cell_3_pcid = 3
serving_cell_dlpower = -20
neigh_cell_1_dlpower = -24
neigh_cell_2_dlpower = -22
neigh_cell_3_dlpower = -23
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell_cid,
self.PCID: serving_cell_pcid,
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + serving_cell_dlpower,
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PCID: neigh_cell_1_pcid,
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_1_dlpower,
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neigh_cell_2_pcid,
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_2_dlpower,
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neigh_cell_3_pcid,
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_3_dlpower,
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
[bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_serving_cell(bts1, serving_cell_dlpower,
serving_cell_cid, serving_cell_pcid)
self._setup_lte_neighbhor_cell_md8475a(
bts2, LTE_BAND_2, neigh_cell_1_dlpower, neigh_cell_1_cid,
neigh_cell_1_pcid)
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
self.setup_3710a_waveform("1", "A", "1960MHZ", neigh_cell_2_dlpower,
"LTE", "10M_B1_CID2")
self.setup_3710a_waveform("1", "B", "1960MHZ", neigh_cell_3_dlpower,
"LTE", "10M_B1_CID3")
self.turn_on_3710a_sg(1)
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="3e094e3d-e7b7-447a-9a7a-8060c5b17e88")
@TelephonyBaseTest.tel_test_wrap
def test_ncells_intra_lte_4_cells(self):
""" Test Number of neighbor cells reported by Phone when four neighbor
cells are present (Phone camped on LTE)
Setup two LTE cell configuration on MD8475A
Setup three waveform on MG3710A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell_cid = 11
serving_cell_pcid = 11
neigh_cell_1_cid = 1
neigh_cell_1_pcid = 1
neigh_cell_2_cid = 2
neigh_cell_2_pcid = 2
neigh_cell_3_cid = 3
neigh_cell_3_pcid = 3
neigh_cell_4_cid = 5
neigh_cell_4_pcid = 5
serving_cell_dlpower = -20
neigh_cell_1_dlpower = -24
neigh_cell_2_dlpower = -22
neigh_cell_3_dlpower = -24
neigh_cell_4_dlpower = -22
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell_cid,
self.PCID: serving_cell_pcid,
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + serving_cell_dlpower,
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PCID: neigh_cell_1_pcid,
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_1_dlpower,
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neigh_cell_2_pcid,
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_2_dlpower,
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neigh_cell_3_pcid,
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_3_dlpower,
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neigh_cell_4_pcid,
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI: self._LTE_RSSI_OFFSET + neigh_cell_4_dlpower,
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
[bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_serving_cell(bts1, serving_cell_dlpower,
serving_cell_cid, serving_cell_pcid)
self._setup_lte_neighbhor_cell_md8475a(
bts2, LTE_BAND_2, neigh_cell_1_dlpower, neigh_cell_1_cid,
neigh_cell_1_pcid)
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
self.setup_3710a_waveform("1", "A", "1960MHZ", neigh_cell_2_dlpower,
"LTE", "10M_B1_CID2")
self.setup_3710a_waveform("1", "B", "1960MHZ", neigh_cell_3_dlpower,
"LTE", "10M_B1_CID3")
self.setup_3710a_waveform("2", "A", "1960MHZ", neigh_cell_4_dlpower,
"LTE", "10M_B1_CID5")
self.turn_on_3710a_sg(1)
self.turn_on_3710a_sg(2)
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="7e9a9c30-9284-4440-b85e-f94b83e0373f")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_lte_intrafreq_0_tmo(self):
""" Test Number of neighbor cells reported by Phone when no neighbor
cells are present (Phone camped on LTE)
Setup a single LTE cell configuration on MD8475A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = lte_band4_ch2000_fr2115_pcid1_cell
serving_cell['power'] = -20
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PCID: serving_cell[self.PCID],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
[bts1] = set_system_model_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power'])
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="13bd7000-5a45-43f5-9e54-001e0aa09262")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_lte_intrafreq_1_tmo(self):
""" Test Number of neighbor cells reported by Phone when one neighbor
cell is present (Phone camped on LTE)
Setup a two LTE cell configuration on MD8475A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = lte_band4_ch2000_fr2115_pcid1_cell
neighbor_cell = lte_band4_ch2000_fr2115_pcid2_cell
serving_cell['power'] = -20
neighbor_cell['power'] = -24
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PCID: serving_cell[self.PCID],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PCID: neighbor_cell[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power'])
self._setup_lte_cell_md8475a(bts2, neighbor_cell,
neighbor_cell['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2000_F2115_PCID2")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="5dca3a16-73a0-448a-a35d-22ebd253a570")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_lte_intrafreq_2_tmo(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells are present (Phone camped on LTE)
Setup one LTE cell configuration on MD8475A
Setup two waveform on MG3710A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = lte_band4_ch2000_fr2115_pcid1_cell
neighbor_cell_1 = lte_band4_ch2000_fr2115_pcid2_cell
neighbor_cell_2 = lte_band4_ch2000_fr2115_pcid3_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -24
neighbor_cell_2['power'] = -23
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PCID: serving_cell[self.PCID],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PCID: neighbor_cell_1[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neighbor_cell_2[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell_2['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power'])
self._setup_lte_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2000_F2115_PCID2")
bts1.set_neighbor_cell_type("LTE", 2, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 2, "LTE_4_C2000_F2115_PCID3")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
self.setup_3710a_waveform("1", "A", "2115MHz",
neighbor_cell_2['power'], "LTE",
"lte_4_ch2000_pcid3")
self.turn_on_3710a_sg(1)
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="860152de-8aa0-422e-b5b0-28bf244076f4")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_lte_intrafreq_3_tmo(self):
""" Test Number of neighbor cells reported by Phone when three neighbor
cells are present (Phone camped on LTE)
Setup a one LTE cell configuration on MD8475A
Setup three waveforms on MG3710A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = lte_band4_ch2000_fr2115_pcid1_cell
neighbor_cell_1 = lte_band4_ch2000_fr2115_pcid2_cell
neighbor_cell_2 = lte_band4_ch2000_fr2115_pcid3_cell
neighbor_cell_3 = lte_band4_ch2000_fr2115_pcid4_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -24
neighbor_cell_2['power'] = -23
neighbor_cell_3['power'] = -22
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PCID: serving_cell[self.PCID],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PCID: neighbor_cell_1[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neighbor_cell_2[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell_2['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neighbor_cell_3[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell_3['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power'])
self._setup_lte_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2000_F2115_PCID2")
bts1.set_neighbor_cell_type("LTE", 2, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 2, "LTE_4_C2000_F2115_PCID3")
bts1.set_neighbor_cell_type("LTE", 3, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 3, "LTE_4_C2000_F2115_PCID4")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
self.setup_3710a_waveform("1", "A", "2115MHz",
neighbor_cell_2['power'], "LTE",
"lte_4_ch2000_pcid3")
self.setup_3710a_waveform("1", "B", "2115MHz",
neighbor_cell_3['power'], "LTE",
"lte_4_ch2000_pcid4")
self.turn_on_3710a_sg(1)
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="8c5b63ba-1322-47b6-adce-5224cbc0995a")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_lte_interfreq_1_tmo(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells(inter frequency) are present (Phone camped on LTE)
Setup a a LTE cell configuration on MD8475A
Setup two LTE waveforms(inter frequency) on MG3710A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = lte_band4_ch2000_fr2115_pcid1_cell
neighbor_cell_1 = lte_band4_ch2050_fr2120_pcid7_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -23
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PCID: serving_cell[self.PCID],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PCID: neighbor_cell_1[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power'])
self._setup_lte_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2050_F2120_PCID7")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
self.ad.droid.telephonyToggleDataConnection(False)
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
time.sleep(self._ANRITSU_SETTLING_TIME)
self.md8475a.set_packet_preservation()
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="97853501-a328-4706-bb3f-c5e708b1ccb8")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_lte_interfreq_2_tmo(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells(inter frequency) are present (Phone camped on LTE)
Setup a a LTE cell configuration on MD8475A
Setup two LTE waveforms(inter frequency) on MG3710A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = lte_band4_ch2000_fr2115_pcid1_cell
neighbor_cell_1 = lte_band4_ch2050_fr2120_pcid7_cell
neighbor_cell_2 = lte_band4_ch2250_fr2140_pcid8_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -23
neighbor_cell_2['power'] = -22
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PCID: serving_cell[self.PCID],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PCID: neighbor_cell_1[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neighbor_cell_2[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell_2['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power'])
self._setup_lte_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 1, "LTE_4_C2050_F2120_PCID7")
bts1.set_neighbor_cell_type("LTE", 2, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 2, "LTE_4_C2250_F2140_PCID8")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
self.ad.droid.telephonyToggleDataConnection(False)
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
time.sleep(self._ANRITSU_SETTLING_TIME)
self.setup_3710a_waveform("1", "A", "2140MHz",
neighbor_cell_2['power'], "LTE",
"lte_4_ch2250_pcid8")
self.turn_on_3710a_sg(1)
self.md8475a.set_packet_preservation()
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="74bd528c-e1c5-476d-9ee0-ebfc7bbc5de1")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_lte_interband_2_tmo(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells(inter band) are present (Phone camped on LTE)
Setup one LTE cell configuration on MD8475A
Setup two LTE waveforms((inter band)) on MG3710A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = lte_band4_ch2000_fr2115_pcid1_cell
neighbor_cell_1 = lte_band2_ch900_fr1960_pcid9_cell
neighbor_cell_2 = lte_band12_ch5095_fr737_pcid10_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -24
neighbor_cell_2['power'] = -22
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PCID: serving_cell[self.PCID],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PCID: neighbor_cell_1[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PCID: neighbor_cell_2[self.PCID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + neighbor_cell_2['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_lte_lte(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power'])
self._setup_lte_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("LTE", 1, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 1, "LTE_2_C900_F1960_PCID9")
bts1.set_neighbor_cell_type("LTE", 2, "CELLNAME")
bts1.set_neighbor_cell_name("LTE", 2, "LTE_12_C5095_F737_PCID10")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
self.ad.droid.telephonyToggleDataConnection(False)
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
self.setup_3710a_waveform("1", "A", "737.5MHz",
neighbor_cell_2['power'], "LTE",
"lte_12_ch5095_pcid10")
self.turn_on_3710a_sg(1)
time.sleep(self._ANRITSU_SETTLING_TIME)
self.md8475a.set_packet_preservation()
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="6289e3e4-9316-4b82-bd0b-dde53f26da0d")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_lte_interrat_1_tmo(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells(inter RAT) are present (Phone camped on LTE)
Setup one LTE and one WCDMA cell configuration on MD8475A
Setup one GSM waveform on MG3710A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = lte_band4_ch2000_fr2115_pcid1_cell
neighbor_cell_1 = wcdma_band1_ch10700_fr2140_cid31_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -24
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PCID: serving_cell[self.PCID],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PSC: neighbor_cell_1[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_lte_wcdma(
self.md8475a, self.user_params, self.ad.sim_card)
self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power'])
self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10700_F2140_CID31")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
self.ad.droid.telephonyToggleDataConnection(False)
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
self.md8475a.set_packet_preservation()
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="9be4e4a8-f79a-4283-9a85-371a9bddfa5d")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_lte_interrat_2_tmo(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells(inter RAT) are present (Phone camped on LTE)
Setup one LTE and one WCDMA cell configuration on MD8475A
Setup one GSM waveform on MG3710A
Make Sure Phone is in LTE mode
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = lte_band4_ch2000_fr2115_pcid1_cell
neighbor_cell_1 = wcdma_band1_ch10700_fr2140_cid31_cell
neighbor_cell_2 = gsm_band1900_ch512_fr1930_cid51_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -24
neighbor_cell_2['power'] = -22
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PCID: serving_cell[self.PCID],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'lte',
self.TARGET_RSSI:
self._LTE_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PSC: neighbor_cell_1[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.CID: neighbor_cell_2[self.CID],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'gsm',
self.TARGET_RSSI:
self._GSM_RSSI_OFFSET + neighbor_cell_2['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_lte_wcdma(
self.md8475a, self.user_params, self.ad.sim_card)
self._setup_lte_cell_md8475a(bts1, serving_cell, serving_cell['power'])
self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10700_F2140_CID31")
bts1.set_neighbor_cell_type("GSM", 1, "CELLNAME")
bts1.set_neighbor_cell_name("GSM", 1, "GSM_1900_C512_F1930_CID51")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
self.ad.droid.telephonyToggleDataConnection(False)
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_LTE_GSM_WCDMA,
RAT_FAMILY_LTE,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_LTE, NETWORK_MODE_LTE_GSM_WCDMA))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
self.setup_3710a_waveform("1", "A", "1930.2MHz",
neighbor_cell_2['power'], "GSM",
"gsm_lac51_cid51")
self.turn_on_3710a_sg(1)
time.sleep(self._ANRITSU_SETTLING_TIME)
self.md8475a.set_packet_preservation()
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="14db7a3d-b18b-4b87-9d84-fb0c00d3971e")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_wcdma_intrafreq_0_tmo(self):
""" Test Number of neighbor cells reported by Phone when no neighbor
cells are present (Phone camped on WCDMA)
Setup a single WCDMA cell configuration on MD8475A
Make Sure Phone camped on WCDMA
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell
serving_cell['power'] = -20
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PSC: serving_cell[self.PSC],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
[bts1] = set_system_model_wcdma(self.md8475a, self.user_params,
self.ad.sim_card)
self._setup_wcdma_cell_md8475a(bts1, serving_cell,
serving_cell['power'])
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_GSM_UMTS,
RAT_FAMILY_UMTS,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="1a227d1e-9991-4646-b51a-8156f24485da")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_wcdma_intrafreq_1_tmo(self):
""" Test Number of neighbor cells reported by Phone when one neighbor
cells is present (Phone camped on WCDMA)
Setup two WCDMA cell configuration on MD8475A
Make Sure Phone camped on WCDMA
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell
neighbor_cell = wcdma_band1_ch10700_fr2140_cid34_cell
serving_cell['power'] = -20
neighbor_cell['power'] = -24
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PSC: serving_cell[self.PSC],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PSC: neighbor_cell[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_wcdma_wcdma(
self.md8475a, self.user_params, self.ad.sim_card)
self._setup_wcdma_cell_md8475a(bts1, serving_cell,
serving_cell['power'])
self._setup_wcdma_cell_md8475a(bts2, neighbor_cell,
neighbor_cell['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10700_F2140_CID34")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_GSM_UMTS,
RAT_FAMILY_UMTS,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="170689a0-0db1-4a14-8b87-5a1b6c9b8581")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_wcdma_intrafreq_2_tmo(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells are present (Phone camped on WCDMA)
Setup two WCDMA cell configuration on MD8475A
Setup one WCDMA waveform on MG3710A
Make Sure Phone camped on WCDMA
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell
neighbor_cell_1 = wcdma_band1_ch10700_fr2140_cid32_cell
neighbor_cell_2 = wcdma_band1_ch10700_fr2140_cid33_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -24
neighbor_cell_2['power'] = -22
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PSC: serving_cell[self.PSC],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PSC: neighbor_cell_1[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PSC: neighbor_cell_2[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell_2['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_wcdma_wcdma(
self.md8475a, self.user_params, self.ad.sim_card)
self._setup_wcdma_cell_md8475a(bts1, serving_cell,
serving_cell['power'])
self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10700_F2140_CID32")
bts1.set_neighbor_cell_type("WCDMA", 2, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 2, "WCDM_1_C10700_F2140_CID33")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_GSM_UMTS,
RAT_FAMILY_UMTS,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
self.setup_3710a_waveform("1", "A", "2140MHz",
neighbor_cell_2['power'], "WCDMA",
"wcdma_1_psc33_cid33")
self.turn_on_3710a_sg(1)
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="3ec77512-4d5b-40c9-b733-cf358f999e15")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_wcdma_intrafreq_3_tmo(self):
""" Test Number of neighbor cells reported by Phone when three neighbor
cells are present (Phone camped on WCDMA)
Setup two WCDMA cell configuration on MD8475A
Setup two WCDMA waveform on MG3710A
Make Sure Phone camped on WCDMA
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell
neighbor_cell_1 = wcdma_band1_ch10700_fr2140_cid32_cell
neighbor_cell_2 = wcdma_band1_ch10700_fr2140_cid33_cell
neighbor_cell_3 = wcdma_band1_ch10700_fr2140_cid34_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -24
neighbor_cell_2['power'] = -23
neighbor_cell_3['power'] = -22
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PSC: serving_cell[self.PSC],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PSC: neighbor_cell_1[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PSC: neighbor_cell_2[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell_2['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PSC: neighbor_cell_3[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell_3['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_wcdma_wcdma(
self.md8475a, self.user_params, self.ad.sim_card)
self._setup_wcdma_cell_md8475a(bts1, serving_cell,
serving_cell['power'])
self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10700_F2140_CID32")
bts1.set_neighbor_cell_type("WCDMA", 2, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 2, "WCDM_1_C10700_F2140_CID33")
bts1.set_neighbor_cell_type("WCDMA", 3, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 3, "WCDM_1_C10700_F2140_CID34")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_GSM_UMTS,
RAT_FAMILY_UMTS,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
self.setup_3710a_waveform("1", "A", "2140MHz",
neighbor_cell_2['power'], "WCDMA",
"wcdma_1_psc33_cid33")
self.setup_3710a_waveform("2", "A", "2140MHz",
neighbor_cell_3['power'], "WCDMA",
"wcdma_1_psc34_cid34")
self.turn_on_3710a_sg(1)
self.turn_on_3710a_sg(2)
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="6f39e4a5-81da-4f47-8022-f22d82ff6f31")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_wcdma_interfreq_1_tmo(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells(inter frequency) are present (Phone camped on WCDMA)
Setup a two WCDMA cell configuration on MD8475A
Setup one WCDMA waveform on MG3710A
Make Sure Phone camped on WCDMA
Verify the number of neighbor cells reported by Phonene
Returns:
True if pass; False if fail
"""
serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell
neighbor_cell_1 = wcdma_band1_ch10800_fr2160_cid37_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -24
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PSC: serving_cell[self.PSC],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PSC: neighbor_cell_1[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_wcdma_wcdma(
self.md8475a, self.user_params, self.ad.sim_card)
self._setup_wcdma_cell_md8475a(bts1, serving_cell,
serving_cell['power'])
self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10800_F2160_CID37")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
#To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
self.ad.droid.telephonyToggleDataConnection(False)
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_GSM_UMTS,
RAT_FAMILY_UMTS,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="992d9ffb-2538-447b-b7e8-f40061063686")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_wcdma_interfreq_2_tmo(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells(inter frequency) are present (Phone camped on WCDMA)
Setup a two WCDMA cell configuration on MD8475A
Setup one WCDMA waveform on MG3710A
Make Sure Phone camped on WCDMA
Verify the number of neighbor cells reported by Phonene
Returns:
True if pass; False if fail
"""
serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell
neighbor_cell_1 = wcdma_band1_ch10575_fr2115_cid36_cell
neighbor_cell_2 = wcdma_band1_ch10800_fr2160_cid37_cell
serving_cell['power'] = -20
neighbor_cell_1['power'] = -24
neighbor_cell_2['power'] = -23
expected_cell_info_list = [
# Serving Cell
{
self.CID: serving_cell[self.CID],
self.PSC: serving_cell[self.PSC],
self.REPORT_RATE: 1,
self.IS_REGISTERED: True,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + serving_cell['power'],
self.MAX_ERROR_RSSI: 3,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
# Neighbor Cells
{
self.PSC: neighbor_cell_1[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell_1['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
},
{
self.PSC: neighbor_cell_2[self.PSC],
self.REPORT_RATE: 0.1,
self.IS_REGISTERED: False,
self.RAT: 'wcdma',
self.TARGET_RSSI:
self._WCDMA_RSSI_OFFSET + neighbor_cell_2['power'],
self.MAX_ERROR_RSSI: 4,
self.MAX_ERROR_AVERAGE_RSSI: 3
}
]
expected_cell_info_stats = {}
for sample in expected_cell_info_list:
expected_cell_info_stats[self._unique_cell_id(sample)] = sample
self.md8475a.load_cell_paramfile(self._CELL_PARAM_FILE)
[bts1, bts2] = set_system_model_wcdma_wcdma(
self.md8475a, self.user_params, self.ad.sim_card)
self._setup_wcdma_cell_md8475a(bts1, serving_cell,
serving_cell['power'])
self._setup_wcdma_cell_md8475a(bts2, neighbor_cell_1,
neighbor_cell_1['power'])
bts1.neighbor_cell_mode = "USERDATA"
bts1.set_neighbor_cell_type("WCDMA", 1, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 1, "WCDM_1_C10575_F2115_CID36")
bts1.set_neighbor_cell_type("WCDMA", 2, "CELLNAME")
bts1.set_neighbor_cell_name("WCDMA", 2, "WCDM_1_C10800_F2160_CID37")
set_usim_parameters(self.md8475a, self.ad.sim_card)
self.md8475a.start_simulation()
# To make sure phone camps on BTS1
bts2.service_state = BtsServiceState.SERVICE_STATE_OUT
self.ad.droid.telephonyToggleDataConnection(False)
if not ensure_network_rat(
self.log,
self.ad,
NETWORK_MODE_GSM_UMTS,
RAT_FAMILY_UMTS,
toggle_apm_after_setting=True):
self.log.error("Failed to set rat family {}, preferred network:{}".
format(RAT_FAMILY_UMTS, NETWORK_MODE_GSM_UMTS))
return False
self.md8475a.wait_for_registration_state()
time.sleep(self._ANRITSU_SETTLING_TIME)
bts2.service_state = BtsServiceState.SERVICE_STATE_IN
self.setup_3710a_waveform("1", "A", "2160MHz",
neighbor_cell_2['power'], "WCDMA",
"wcdma_1_psc37_cid37")
self.turn_on_3710a_sg(1)
time.sleep(self._SETTLING_TIME)
return self._verify_cell_info(self.ad, expected_cell_info_stats)
@test_tracker_info(uuid="60cb8c15-3cb3-4ead-9e59-a8aee819e9ef")
@TelephonyBaseTest.tel_test_wrap
def test_neighbor_cell_reporting_wcdma_interband_2_tmo(self):
""" Test Number of neighbor cells reported by Phone when two neighbor
cells(inter band) are present (Phone camped on WCDMA)
Setup a two WCDMA cell configuration on MD8475A
Setup one WCDMA waveform on MG3710A
Make Sure Phone camped on WCDMA
Verify the number of neighbor cells reported by Phone
Returns:
True if pass; False if fail
"""
serving_cell = wcdma_band1_ch10700_fr2140_cid31_cell
neighbor_cell_1 = wcdma_band2_ch9800_fr1960_cid38_cell
neighbor_cell_2 = wcdma_band2_ch9900_fr1980_cid39_cell