| #!/usr/bin/env python3.4 |
| # |
| # Copyright 2016 - The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import itertools |
| import queue |
| |
| from acts import asserts |
| from acts import base_test |
| from acts import utils |
| from acts.test_utils.wifi import wifi_test_utils as wutils |
| |
| BSSID_EVENT_WAIT = 30 |
| |
| BSSID_EVENT_TAG = "WifiScannerBssid" |
| SCAN_EVENT_TAG = "WifiScannerScan" |
| SCANTIME = 10000 #framework support only 10s as minimum scan interval |
| |
| |
| class WifiScannerBssidError(Exception): |
| pass |
| |
| |
| class WifiScannerBssidTest(base_test.BaseTestClass): |
| def setup_class(self): |
| self.default_scan_setting = { |
| "band": wutils.WifiEnums.WIFI_BAND_BOTH_WITH_DFS, |
| "periodInMs": SCANTIME, |
| "reportEvents": wutils.WifiEnums.REPORT_EVENT_AFTER_EACH_SCAN, |
| 'numBssidsPerScan': 32 |
| } |
| self.leeway = 5 |
| self.stime_channel = 47 #dwell time plus 2ms |
| self.dut = self.android_devices[0] |
| wutils.wifi_test_device_init(self.dut) |
| self.attenuators = wutils.group_attenuators(self.attenuators) |
| asserts.assert_true(self.dut.droid.wifiIsScannerSupported(), |
| "Device %s doesn't support WifiScanner, abort." % |
| self.dut.model) |
| """It will setup the required dependencies and fetch the user params from |
| config file""" |
| self.attenuators[0].set_atten(0) |
| self.attenuators[1].set_atten(0) |
| req_params = ("bssid_2g", "bssid_5g", "bssid_dfs", "attenuator_id", |
| "max_bugreports") |
| self.wifi_chs = wutils.WifiChannelUS(self.dut.model) |
| self.unpack_userparams(req_params) |
| |
| def on_fail(self, test_name, begin_time): |
| if self.max_bugreports > 0: |
| self.dut.take_bug_report(test_name, begin_time) |
| self.max_bugreports -= 1 |
| |
| """ Helper Functions Begin """ |
| |
| def fetch_scan_result(self, scan_idx, scan_setting): |
| """Fetch the scan result for provider listener index. |
| |
| This function calculate the time required for scanning based on scan setting |
| and wait for scan result event, on triggering of event process the scan result. |
| |
| Args: |
| scan_idx: Index of the scan listener. |
| scan_setting: Setting used for starting the scan. |
| |
| Returns: |
| scan_results: if scan result available. |
| """ |
| #generating event wait time from scan setting plus leeway |
| self.log.debug(scan_setting) |
| scan_time, scan_channels = wutils.get_scan_time_and_channels( |
| self.wifi_chs, scan_setting, self.stime_channel) |
| scan_time += scan_setting['periodInMs' |
| ] #add scan period delay for next cycle |
| if scan_setting[ |
| "reportEvents"] == wutils.WifiEnums.REPORT_EVENT_AFTER_EACH_SCAN: |
| waittime = int(scan_time / 1000) + self.leeway |
| else: |
| time_cache = scan_setting['periodInMs'] * 10 #default cache |
| waittime = int((time_cache + scan_time) / 1000) + self.leeway |
| event_name = "%s%sonResults" % (SCAN_EVENT_TAG, scan_idx) |
| self.log.info("Waiting for the scan result event %s", event_name) |
| event = self.dut.ed.pop_event(event_name, waittime) |
| results = event["data"]["Results"] |
| if len(results) > 0 and "ScanResults" in results[0]: |
| return results[0]["ScanResults"] |
| |
| def start_scan_and_validate_environment(self, scan_setting, |
| bssid_settings): |
| """Validate environment for test using current scan result for provided |
| settings. |
| |
| This function start the scan for given setting and verify that interested |
| Bssids are in scan result or not. |
| |
| Args: |
| scan_setting: Setting used for starting the scan. |
| bssid_settings: list of bssid settings. |
| |
| Returns: |
| True, if bssid not found in scan result. |
| """ |
| try: |
| data = wutils.start_wifi_background_scan(self.dut, scan_setting) |
| self.scan_idx = data["Index"] |
| results = self.fetch_scan_result(self.scan_idx, scan_setting) |
| self.log.debug("scan result %s.", results) |
| asserts.assert_true(results, |
| "Device is not able to fetch the scan results") |
| for result in results: |
| for bssid_setting in bssid_settings: |
| if bssid_setting[wutils.WifiEnums.BSSID_KEY] == result[ |
| wutils.WifiEnums.BSSID_KEY]: |
| asserts.fail(("Test environment is not valid: Bssid %s" |
| "already exist in current scan results") |
| % result[wutils.WifiEnums.BSSID_KEY]) |
| except queue.Empty as error: |
| self.dut.droid.wifiScannerStopBackgroundScan(self.scan_idx) |
| raise AssertionError( |
| "OnResult event did not triggered for scanner\n%s" % error) |
| |
| def check_bssid_in_found_result(self, bssid_settings, found_results): |
| """look for any tracked bssid in reported result of found bssids. |
| |
| Args: |
| bssid_settings:Setting used for tracking bssids. |
| found_results: Result reported in found event. |
| |
| Returns: |
| True if bssid is present in result. |
| """ |
| for bssid_setting in bssid_settings: |
| for found_result in found_results: |
| if found_result[wutils.WifiEnums.BSSID_KEY] == bssid_setting[ |
| wutils.WifiEnums.BSSID_KEY]: |
| return |
| asserts.fail("Test fail because Bssid %s is not found in event results" |
| % bssid_settings) |
| |
| def track_bssid_with_vaild_scan_for_found(self, track_setting): |
| """Common logic for tracking a bssid for Found event. |
| |
| 1. Starts Wifi Scanner bssid tracking for interested bssids in track_setting. |
| 2. Start Wifi Scanner scan with default scan settings. |
| 3. Validate the environment to check AP is not in range. |
| 4. Attenuate the signal to make AP in range. |
| 5. Verified that onFound event is triggered for interested bssids in |
| track setting. |
| |
| Args: |
| track_setting: Setting for bssid tracking. |
| |
| Returns: |
| True if found event occur for interested BSSID. |
| """ |
| self.attenuators[self.attenuator_id].set_atten(90) |
| data = wutils.start_wifi_track_bssid(self.dut, track_setting) |
| idx = data["Index"] |
| self.start_scan_and_validate_environment(self.default_scan_setting, |
| track_setting["bssidInfos"]) |
| try: |
| self.attenuators[self.attenuator_id].set_atten(0) |
| event_name = "%s%sonFound" % (BSSID_EVENT_TAG, idx) |
| self.log.info("Waiting for the BSSID event %s", event_name) |
| event = self.dut.ed.pop_event(event_name, BSSID_EVENT_WAIT) |
| self.log.debug(event) |
| self.check_bssid_in_found_result(track_setting["bssidInfos"], |
| event["data"]["Results"]) |
| except queue.Empty as error: |
| self.log.error(error) |
| # log scan result for debugging |
| results = self.fetch_scan_result(self.scan_idx, |
| self.default_scan_setting) |
| self.log.debug("scan result %s", results) |
| raise AssertionError("Event %s did not triggered for %s\n%s" % |
| (event_name, track_setting["bssidInfos"], |
| error)) |
| finally: |
| self.dut.droid.wifiScannerStopBackgroundScan(self.scan_idx) |
| self.dut.droid.wifiScannerStopTrackingBssids(idx) |
| |
| def track_bssid_with_vaild_scan_for_lost(self, track_setting): |
| """Common logic for tracking a bssid for Lost event. |
| |
| 1. Start Wifi Scanner scan with default scan settings. |
| 2. Validate the environment to check AP is not in range. |
| 3. Starts Wifi Scanner bssid tracking for interested bssids in track_setting. |
| 4. Attenuate the signal to make Bssids in range. |
| 5. Verified that onFound event is triggered for interested bssids in |
| track setting. |
| 6. Attenuate the signal to make Bssids out of range. |
| 7. Verified that onLost event is triggered. |
| |
| Args: |
| track_setting: Setting for bssid tracking. |
| scan_setting: Setting used for starting the scan. |
| |
| Returns: |
| True if Lost event occur for interested BSSID. |
| """ |
| self.attenuators[self.attenuator_id].set_atten(90) |
| self.start_scan_and_validate_environment(self.default_scan_setting, |
| track_setting["bssidInfos"]) |
| idx = None |
| found = False |
| try: |
| data = wutils.start_wifi_track_bssid(self.dut, track_setting) |
| idx = data["Index"] |
| self.attenuators[self.attenuator_id].set_atten(0) |
| #onFound event should be occurre before tracking for onLost event |
| event_name = "%s%sonFound" % (BSSID_EVENT_TAG, idx) |
| self.log.info("Waiting for the BSSID event %s", event_name) |
| event = self.dut.ed.pop_event(event_name, BSSID_EVENT_WAIT) |
| self.log.debug(event) |
| self.check_bssid_in_found_result(track_setting["bssidInfos"], |
| event["data"]["Results"]) |
| self.attenuators[self.attenuator_id].set_atten(90) |
| # log scan result for debugging |
| for i in range(1, track_setting["apLostThreshold"]): |
| results = self.fetch_scan_result(self.scan_idx, |
| self.default_scan_setting) |
| self.log.debug("scan result %s %s", i, results) |
| event_name = "%s%sonLost" % (BSSID_EVENT_TAG, idx) |
| self.log.info("Waiting for the BSSID event %s", event_name) |
| event = self.dut.ed.pop_event(event_name, BSSID_EVENT_WAIT) |
| self.log.debug(event) |
| except queue.Empty as error: |
| raise AssertionError("Event %s did not triggered for %s\n%s" % |
| (event_name, track_setting["bssidInfos"], |
| error)) |
| finally: |
| self.dut.droid.wifiScannerStopBackgroundScan(self.scan_idx) |
| if idx: |
| self.dut.droid.wifiScannerStopTrackingBssids(idx) |
| |
| def wifi_generate_track_bssid_settings(self, isLost): |
| """Generates all the combinations of different track setting parameters. |
| |
| Returns: |
| A list of dictionaries each representing a set of track settings. |
| """ |
| bssids = [[self.bssid_2g], [self.bssid_5g], |
| [self.bssid_2g, self.bssid_5g]] |
| if self.dut.model != "hammerhead": |
| bssids.append([self.bssid_dfs]) |
| if isLost: |
| apthreshold = (3, 5) |
| else: |
| apthreshold = (1, ) |
| # Create track setting strings based on the combinations |
| setting_combinations = list(itertools.product(bssids, apthreshold)) |
| # Create scan setting strings based on the combinations |
| track_settings = [] |
| for combo in setting_combinations: |
| s = {} |
| s["bssidInfos"] = combo[0] |
| s["apLostThreshold"] = combo[1] |
| track_settings.append(s) |
| return track_settings |
| |
| def track_setting_to_string(self, track_setting): |
| """Convert track setting to string for Bssids in that""" |
| string = "" |
| for bssid_setting in track_setting: |
| string += bssid_setting[wutils.WifiEnums.BSSID_KEY] |
| string += "_" |
| return string |
| |
| """ Helper Functions End """ |
| """ Tests Begin """ |
| |
| def test_wifi_track_bssid_found(self): |
| """Test bssid track for event found with a list of different settings. |
| |
| 1. Starts Wifi Scanner bssid tracking for interested bssids in track_setting. |
| 2. Start Wifi Scanner scan with default scan settings. |
| 3. Validate the environment to check AP is not in range. |
| 4. Attenuate the signal to make AP in range. |
| 5. Verified that onFound event is triggered for interested bssids in |
| track setting. |
| """ |
| track_settings = self.wifi_generate_track_bssid_settings(False) |
| name_func = lambda track_setting: "test_wifi_track_found_bssidInfos_%sapLostThreshold_%s" % (self.track_setting_to_string(track_setting["bssidInfos"]), track_setting["apLostThreshold"]) |
| failed = self.run_generated_testcases( |
| self.track_bssid_with_vaild_scan_for_found, |
| track_settings, |
| name_func=name_func) |
| asserts.assert_true(not failed, |
| "Track bssid found failed with these bssids: %s" % |
| failed) |
| |
| def test_wifi_track_bssid_lost(self): |
| """Test bssid track for event lost with a list of different settings. |
| |
| 1. Start Wifi Scanner scan with default scan settings. |
| 2. Validate the environment to check AP is not in range. |
| 3. Starts Wifi Scanner bssid tracking for interested bssids in track_setting. |
| 4. Attenuate the signal to make Bssids in range. |
| 5. Verified that onFound event is triggered for interested bssids in |
| track setting. |
| 6. Attenuate the signal to make Bssids out of range. |
| 7. Verified that onLost event is triggered. |
| """ |
| track_settings = self.wifi_generate_track_bssid_settings(True) |
| name_func = lambda track_setting: "test_wifi_track_lost_bssidInfos_%sapLostThreshold_%s" % (self.track_setting_to_string(track_setting["bssidInfos"]), track_setting["apLostThreshold"]) |
| failed = self.run_generated_testcases( |
| self.track_bssid_with_vaild_scan_for_lost, |
| track_settings, |
| name_func=name_func) |
| asserts.assert_true(not failed, |
| "Track bssid lost failed with these bssids: %s" % |
| failed) |
| |
| def test_wifi_track_bssid_sanity(self): |
| """Test bssid track for event found and lost with default settings. |
| |
| 1. Start WifiScanner scan for default scan settings. |
| 2. Start Bssid track for "bssid_2g" AP. |
| 3. Attenuate the signal to move in AP range. |
| 4. Verify that onFound event occur. |
| 5. Attenuate the signal to move out of range |
| 6. Verify that onLost event occur. |
| """ |
| track_setting = {"bssidInfos": [self.bssid_2g], "apLostThreshold": 3} |
| self.track_bssid_with_vaild_scan_for_lost(track_setting) |
| |
| def test_wifi_track_bssid_for_2g_while_scanning_5g_channels(self): |
| """Test bssid track for 2g bssids while scanning 5g channels. |
| |
| 1. Starts Wifi Scanner bssid tracking for 2g bssids in track_setting. |
| 2. Start Wifi Scanner scan for 5G Band only. |
| 3. Validate the environment to check AP is not in range. |
| 4. Attenuate the signal to make AP in range. |
| 5. Verified that onFound event isn't triggered for 2g bssids. |
| """ |
| self.attenuators[self.attenuator_id].set_atten(90) |
| scan_setting = {"band": wutils.WifiEnums.WIFI_BAND_5_GHZ, |
| "periodInMs": SCANTIME, |
| "reportEvents": |
| wutils.WifiEnums.REPORT_EVENT_AFTER_EACH_SCAN, |
| "numBssidsPerScan": 32} |
| track_setting = {"bssidInfos": [self.bssid_2g], "apLostThreshold": 3} |
| self.start_scan_and_validate_environment(scan_setting, |
| track_setting["bssidInfos"]) |
| idx = None |
| try: |
| data = wutils.start_wifi_track_bssid(self.dut, track_setting) |
| idx = data["Index"] |
| self.attenuators[self.attenuator_id].set_atten(0) |
| event_name = "%s%sonFound" % (BSSID_EVENT_TAG, idx) |
| self.log.info("Waiting for the BSSID event %s", event_name) |
| #waiting for 2x time to make sure |
| event = self.dut.ed.pop_event(event_name, BSSID_EVENT_WAIT * 2) |
| self.log.debug(event) |
| self.check_bssid_in_found_result(track_setting["bssidInfos"], |
| event["data"]["Results"]) |
| except queue.Empty as error: |
| self.log.info( |
| "As excepted event didn't occurred with different scan setting") |
| finally: |
| self.dut.droid.wifiScannerStopBackgroundScan(self.scan_idx) |
| if idx: |
| self.dut.droid.wifiScannerStopTrackingBssids(idx) |
| |
| def test_wifi_track_bssid_for_5g_while_scanning_2g_channels(self): |
| """Test bssid track for 5g bssids while scanning 2g channels. |
| |
| 1. Starts Wifi Scanner bssid tracking for 5g bssids in track_setting. |
| 2. Start Wifi Scanner scan for 2G Band only. |
| 3. Validate the environment to check AP is not in range. |
| 4. Attenuate the signal to make AP in range. |
| 5. Verified that onFound event isn't triggered for 5g bssids. |
| """ |
| self.attenuators[self.attenuator_id].set_atten(90) |
| scan_setting = {"band": wutils.WifiEnums.WIFI_BAND_24_GHZ, |
| "periodInMs": SCANTIME, |
| "reportEvents": |
| wutils.WifiEnums.REPORT_EVENT_AFTER_EACH_SCAN, |
| "numBssidsPerScan": 32} |
| track_setting = {"bssidInfos": [self.bssid_5g], "apLostThreshold": 3} |
| data = wutils.start_wifi_track_bssid(self.dut, track_setting) |
| idx = data["Index"] |
| self.start_scan_and_validate_environment(scan_setting, |
| track_setting["bssidInfos"]) |
| idx = None |
| try: |
| self.attenuators[self.attenuator_id].set_atten(0) |
| event_name = "%s%sonFound" % (BSSID_EVENT_TAG, idx) |
| self.log.info("Waiting for the BSSID event %s", event_name) |
| #waiting for 2x time to make sure |
| event = self.dut.ed.pop_event(event_name, BSSID_EVENT_WAIT * 2) |
| self.log.debug(event) |
| self.check_bssid_in_found_result(track_setting["bssidInfos"], |
| event["data"]["Results"]) |
| except queue.Empty as error: |
| self.log.info( |
| "As excepted event didn't occurred with different scan setting") |
| finally: |
| self.dut.droid.wifiScannerStopBackgroundScan(self.scan_idx) |
| if idx: |
| self.dut.droid.wifiScannerStopTrackingBssids(idx) |
| |
| """ Tests End """ |
