/*
 * Copyright (C) 2008 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package com.android.ddmlib.log;


import com.android.ddmlib.utils.ArrayHelper;

import java.security.InvalidParameterException;

/**
 * Receiver able to provide low level parsing for device-side log services.
 */
public final class LogReceiver {

    private static final int ENTRY_HEADER_SIZE = 20; // 2*2 + 4*4; see LogEntry.

    /**
     * Represents a log entry and its raw data.
     */
    public static final class LogEntry {
        /*
         * See //device/include/utils/logger.h
         */
        /** 16bit unsigned: length of the payload. */
        public int  len; /* This is normally followed by a 16 bit padding */
        /** pid of the process that generated this {@link LogEntry} */
        public int   pid;
        /** tid of the process that generated this {@link LogEntry} */
        public int   tid;
        /** Seconds since epoch. */
        public int   sec;
        /** nanoseconds. */
        public int   nsec;
        /** The entry's raw data. */
        public byte[] data;
    }

    /**
     * Classes which implement this interface provide a method that deals
     * with {@link LogEntry} objects coming from log service through a {@link LogReceiver}.
     * <p/>This interface provides two methods.
     * <ul>
     * <li>{@link #newEntry(com.android.ddmlib.log.LogReceiver.LogEntry)} provides a
     * first level of parsing, extracting {@link LogEntry} objects out of the log service output.</li>
     * <li>{@link #newData(byte[], int, int)} provides a way to receive the raw information
     * coming directly from the log service.</li>
     * </ul>
     */
    public interface ILogListener {
        /**
         * Sent when a new {@link LogEntry} has been parsed by the {@link LogReceiver}.
         * @param entry the new log entry.
         */
        void newEntry(LogEntry entry);
        
        /**
         * Sent when new raw data is coming from the log service.
         * @param data the raw data buffer.
         * @param offset the offset into the buffer signaling the beginning of the new data.
         * @param length the length of the new data.
         */
        void newData(byte[] data, int offset, int length);
    }

    /** Current {@link LogEntry} being read, before sending it to the listener. */
    private LogEntry mCurrentEntry;

    /** Temp buffer to store partial entry headers. */
    private byte[] mEntryHeaderBuffer = new byte[ENTRY_HEADER_SIZE];
    /** Offset in the partial header buffer */
    private int mEntryHeaderOffset = 0;
    /** Offset in the partial entry data */
    private int mEntryDataOffset = 0;
    
    /** Listener waiting for receive fully read {@link LogEntry} objects */
    private ILogListener mListener;

    private boolean mIsCancelled = false;
    
    /**
     * Creates a {@link LogReceiver} with an {@link ILogListener}.
     * <p/>
     * The {@link ILogListener} will receive new log entries as they are parsed, in the form 
     * of {@link LogEntry} objects.
     * @param listener the listener to receive new log entries.
     */
    public LogReceiver(ILogListener listener) {
        mListener = listener;
    }
    

    /**
     * Parses new data coming from the log service.
     * @param data the data buffer
     * @param offset the offset into the buffer signaling the beginning of the new data.
     * @param length the length of the new data.
     */
    public void parseNewData(byte[] data, int offset, int length) {
        // notify the listener of new raw data
        if (mListener != null) {
            mListener.newData(data, offset, length);
        }

        // loop while there is still data to be read and the receiver has not be cancelled.
        while (length > 0 && !mIsCancelled) {
            // first check if we have no current entry.
            if (mCurrentEntry == null) {
                if (mEntryHeaderOffset + length < ENTRY_HEADER_SIZE) {
                    // if we don't have enough data to finish the header, save
                    // the data we have and return
                    System.arraycopy(data, offset, mEntryHeaderBuffer, mEntryHeaderOffset, length);
                    mEntryHeaderOffset += length;
                    return;
                } else {
                    // we have enough to fill the header, let's do it.
                    // did we store some part at the beginning of the header?
                    if (mEntryHeaderOffset != 0) {
                        // copy the rest of the entry header into the header buffer
                        int size = ENTRY_HEADER_SIZE - mEntryHeaderOffset; 
                        System.arraycopy(data, offset, mEntryHeaderBuffer, mEntryHeaderOffset,
                                size);
                        
                        // create the entry from the header buffer
                        mCurrentEntry = createEntry(mEntryHeaderBuffer, 0);
    
                        // since we used the whole entry header buffer, we reset  the offset
                        mEntryHeaderOffset = 0;
                        
                        // adjust current offset and remaining length to the beginning
                        // of the entry data
                        offset += size;
                        length -= size;
                    } else {
                        // create the entry directly from the data array
                        mCurrentEntry = createEntry(data, offset);
                        
                        // adjust current offset and remaining length to the beginning
                        // of the entry data
                        offset += ENTRY_HEADER_SIZE;
                        length -= ENTRY_HEADER_SIZE;
                    }
                }
            }
            
            // at this point, we have an entry, and offset/length have been updated to skip
            // the entry header.
    
            // if we have enough data for this entry or more, we'll need to end this entry
            if (length >= mCurrentEntry.len - mEntryDataOffset) {
                // compute and save the size of the data that we have to read for this entry,
                // based on how much we may already have read.
                int dataSize = mCurrentEntry.len - mEntryDataOffset;  
    
                // we only read what we need, and put it in the entry buffer.
                System.arraycopy(data, offset, mCurrentEntry.data, mEntryDataOffset, dataSize);
                
                // notify the listener of a new entry
                if (mListener != null) {
                    mListener.newEntry(mCurrentEntry);
                }
    
                // reset some flags: we have read 0 data of the current entry.
                // and we have no current entry being read.
                mEntryDataOffset = 0;
                mCurrentEntry = null;
                
                // and update the data buffer info to the end of the current entry / start
                // of the next one.
                offset += dataSize;
                length -= dataSize;
            } else {
                // we don't have enough data to fill this entry, so we store what we have
                // in the entry itself.
                System.arraycopy(data, offset, mCurrentEntry.data, mEntryDataOffset, length);
                
                // save the amount read for the data.
                mEntryDataOffset += length;
                return;
            }
        }
    }

    /**
     * Returns whether this receiver is canceling the remote service.
     */
    public boolean isCancelled() {
        return mIsCancelled;
    }
    
    /**
     * Cancels the current remote service.
     */
    public void cancel() {
        mIsCancelled = true;
    }
    
    /**
     * Creates a {@link LogEntry} from the array of bytes. This expects the data buffer size
     * to be at least <code>offset + {@link #ENTRY_HEADER_SIZE}</code>.
     * @param data the data buffer the entry is read from.
     * @param offset the offset of the first byte from the buffer representing the entry.
     * @return a new {@link LogEntry} or <code>null</code> if some error happened.
     */
    private LogEntry createEntry(byte[] data, int offset) {
        if (data.length < offset + ENTRY_HEADER_SIZE) {
            throw new InvalidParameterException(
                    "Buffer not big enough to hold full LoggerEntry header");
        }

        // create the new entry and fill it.
        LogEntry entry = new LogEntry();
        entry.len = ArrayHelper.swapU16bitFromArray(data, offset);
        
        // we've read only 16 bits, but since there's also a 16 bit padding,
        // we can skip right over both.
        offset += 4;
        
        entry.pid = ArrayHelper.swap32bitFromArray(data, offset);
        offset += 4;
        entry.tid = ArrayHelper.swap32bitFromArray(data, offset);
        offset += 4;
        entry.sec = ArrayHelper.swap32bitFromArray(data, offset);
        offset += 4;
        entry.nsec = ArrayHelper.swap32bitFromArray(data, offset);
        offset += 4;
        
        // allocate the data
        entry.data = new byte[entry.len];
        
        return entry;
    }
    
}