USAGE: apksigner sign [options] apk

This signs the provided APK, stripping out any pre-existing signatures. Signing
is performed using one or more signers, each represented by an asymmetric key
pair and a corresponding certificate. Typically, an APK is signed by just one
signer. For each signer, you need to provide the signer's private key and
certificate.


        GENERAL OPTIONS

--in                  Input APK file to sign. This is an alternative to
                      specifying the APK as the very last parameter, after all
                      options. Unless --out is specified, this file will be
                      overwritten with the resulting signed APK.

--out                 File into which to output the signed APK. By default, the
                      APK is signed in-place, overwriting the input file.

-v, --verbose         Verbose output mode

--v1-signing-enabled  Whether to enable signing using JAR signing scheme (aka v1
                      signing scheme) used in Android since day one. By default,
                      signing using this scheme is enabled based on min and max
                      SDK version (see --min-sdk-version and --max-sdk-version).

--v2-signing-enabled  Whether to enable signing using APK Signature Scheme v2
                      (aka v2 signing scheme) introduced in Android Nougat,
                      API Level 24. By default, signing using this scheme is
                      enabled based on min and max SDK version (see
                      --min-sdk-version and --max-sdk-version).

--v3-signing-enabled  Whether to enable signing using APK Signature Scheme v3
                      (aka v3 signing scheme) introduced in Android P,
                      API Level 28. By default, signing using this scheme is
                      enabled based on min and max SDK version (see
                      --min-sdk-version and --max-sdk-version).  Multiple
                      signers are not supported when using v3 signing, but
                      multiple signers may be provided in conjunction with the
                      "lineage" option to make sure that the app is signed by
                      an appropriate signer on all supported platform versions.

--v4-signing-enabled  Whether to enable signing using APK Signature Scheme v4
                      (aka v4 signing scheme) introduced in Android 11,
                      API Level 30. By default, signing using this scheme is
                      enabled based on min and max SDK version (see
                      --min-sdk-version and --max-sdk-version).

--force-stamp-overwrite  Whether to overwrite existing source stamp in the
                      APK, if found. By default, it is set to false. It has no
                      effect if no source stamp signer config is provided.

--verity-enabled      Whether to enable the verity signature algorithm for the
                      v2 and v3 signature schemes.

--min-sdk-version     Lowest API Level on which this APK's signatures will be
                      verified. By default, the value from AndroidManifest.xml
                      is used. The higher the value, the stronger security
                      parameters are used when signing.

--max-sdk-version     Highest API Level on which this APK's signatures will be
                      verified. By default, the highest possible value is used.

--debuggable-apk-permitted  Whether to permit signing android:debuggable="true"
                      APKs. Android disables some of its security protections
                      for such apps. For example, anybody with ADB shell access
                      can execute arbitrary code in the context of a debuggable
                      app and can read/write persistently stored data of the
                      app. It is a good security practice to not sign
                      debuggable APKs with production signing keys, because
                      such APKs puts users at risk once leaked.
                      By default, signing debuggable APKs is permitted, for
                      backward compatibility with older apksigner versions.

--lineage             Signing certificate history to use in the event that
                      signing certificates changed for an APK using APK
                      Signature Scheme v3 supported signing certificate
                      rotation.  This object may be created by the apksigner
                      "rotate" command.  If used, all signers used to sign the
                      APK must be present in the signing lineage,
                      and if v1 or v2 signing is enabled, the first (oldest)
                      entry in the lineage must have a signer provided, so that
                      it can be used for those v1 and/or v2 signing. Multiple
                      signers are not supported when using APK Signature Scheme
                      v3, so multiple signers input will correspond to different
                      points in the lineage and will be used on older platform
                      versions when the newest signer in the lineage is
                      unsupported.
                      An APK previously signed with a SigningCertificateLineage
                      can also be specified; the lineage will then be read from
                      the signed data in the APK.

--deterministic-dsa-signing  When signing with the DSA signature algorithm,
                      whether to use the deterministic version as specified in
                      RFC 6979.

--append-signature    Appends the current signature to any signatures that
                      already exist within the APK. This option can be used
                      when an APK is signed by multiple independent signers to
                      allow each to add their own signature without needing to
                      share their private key. This option can also be used to
                      preserve existing key / value blocks that exist within the
                      APK signing block.

-h, --help            Show help about this command and exit


        PER-SIGNER OPTIONS
These options specify the configuration of a particular signer. To delimit
options of different signers, use --next-signer.

--next-signer         Delimits options of two different signers. There is no
                      need to use this option when only one signer is used.

--v1-signer-name      Basename for files comprising the JAR signature scheme
                      (aka v1 scheme) signature of this signer. By default,
                      KeyStore key alias or basename of key file is used.

--stamp-signer        The signing information for the signer of the source stamp
                      to be included in the APK.

        PER-SIGNER SIGNING KEY & CERTIFICATE OPTIONS
There are two ways to provide the signer's private key and certificate: (1) Java
KeyStore (see --ks), or (2) private key file in PKCS #8 format and certificate
file in X.509 format (see --key and --cert).

--ks                  Load private key and certificate chain from the Java
                      KeyStore initialized from the specified file. NONE means
                      no file is needed by KeyStore, which is the case for some
                      PKCS #11 KeyStores.

--ks-key-alias        Alias under which the private key and certificate are
                      stored in the KeyStore. This must be specified if the
                      KeyStore contains multiple keys.

--ks-pass             KeyStore password (see --ks). The following formats are
                      supported:
                          pass:<password> password provided inline
                          env:<name>      password provided in the named
                                          environment variable
                          file:<file>     password provided in the named
                                          file, as a single line
                          stdin           password provided on standard input,
                                          as a single line
                      A password is required to open a KeyStore.
                      By default, the tool will prompt for password via console
                      or standard input.
                      When the same file (including standard input) is used for
                      providing multiple passwords, the passwords are read from
                      the file one line at a time. Passwords are read in the
                      order in which signers are specified and, within each
                      signer, KeyStore password is read before the key password
                      is read.

--key-pass            Password with which the private key is protected.
                      The following formats are supported:
                          pass:<password> password provided inline
                          env:<name>      password provided in the named
                                          environment variable
                          file:<file>     password provided in the named
                                          file, as a single line
                          stdin           password provided on standard input,
                                          as a single line
                      If --key-pass is not specified for a KeyStore key, this
                      tool will attempt to load the key using the KeyStore
                      password and, if that fails, will prompt for key password
                      and attempt to load the key using that password.
                      If --key-pass is not specified for a private key file key,
                      this tool will prompt for key password only if a password
                      is required.
                      When the same file (including standard input) is used for
                      providing multiple passwords, the passwords are read from
                      the file one line at a time. Passwords are read in the
                      order in which signers are specified and, within each
                      signer, KeyStore password is read before the key password
                      is read.

--pass-encoding       Additional character encoding (e.g., ibm437 or utf-8) to
                      try for passwords containing non-ASCII characters.
                      KeyStores created by keytool are often encrypted not using
                      the Unicode form of the password but rather using the form
                      produced by encoding the password using the console's
                      character encoding. apksigner by default tries to decrypt
                      using several forms of the password: the Unicode form, the
                      form encoded using the JVM default charset, and, on Java 8
                      and older, the form encoded using the console's charset.
                      On Java 9, apksigner cannot detect the console's charset
                      and may need to be provided with --pass-encoding when a
                      non-ASCII password is used. --pass-encoding may also need
                      to be provided for a KeyStore created by keytool on a
                      different OS or in a different locale.

--ks-type             Type/algorithm of KeyStore to use. By default, the default
                      type is used.

--ks-provider-name    Name of the JCA Provider from which to request the
                      KeyStore implementation. By default, the highest priority
                      provider is used. See --ks-provider-class for the
                      alternative way to specify a provider.

--ks-provider-class   Fully-qualified class name of the JCA Provider from which
                      to request the KeyStore implementation. By default, the
                      provider is chosen based on --ks-provider-name.

--ks-provider-arg     Value to pass into the constructor of the JCA Provider
                      class specified by --ks-provider-class. The value is
                      passed into the constructor as java.lang.String. By
                      default, the no-arg provider's constructor is used.

--key                 Load private key from the specified file. If the key is
                      password-protected, the password will be prompted via
                      standard input unless specified otherwise using
                      --key-pass. The file must be in PKCS #8 DER format.

--cert                Load certificate chain from the specified file. The file
                      must be in X.509 PEM or DER format.


        JCA PROVIDER INSTALLATION OPTIONS
These options enable you to install additional Java Crypto Architecture (JCA)
Providers, such as PKCS #11 providers. Use --next-provider to delimit options of
different providers. Providers are installed in the order in which they appear
on the command-line.

--provider-class      Fully-qualified class name of the JCA Provider.

--provider-arg        Value to pass into the constructor of the JCA Provider
                      class specified by --provider-class. The value is passed
                      into the constructor as java.lang.String. By default, the
                      no-arg provider's constructor is used.

--provider-pos        Position / priority at which to install this provider in
                      the JCA provider list. By default, the provider is
                      installed as the lowest priority provider.
                      See java.security.Security.insertProviderAt.


        EXAMPLES

1. Sign an APK, in-place, using the one and only key in keystore release.jks:
$ apksigner sign --ks release.jks app.apk

1. Sign an APK, without overwriting, using the one and only key in keystore
   release.jks:
$ apksigner sign --ks release.jks --in app.apk --out app-signed.apk

3. Sign an APK using a private key and certificate stored as individual files:
$ apksigner sign --key release.pk8 --cert release.x509.pem app.apk

4. Sign an APK using two keys:
$ apksigner sign --ks release.jks --next-signer --ks magic.jks app.apk

5. Sign an APK using PKCS #11 JCA Provider:
$ apksigner sign --provider-class sun.security.pkcs11.SunPKCS11 \
    --provider-arg token.cfg --ks NONE --ks-type PKCS11 app.apk

6. Sign an APK using a non-ASCII password KeyStore created on English Windows.
   The --pass-encoding parameter is not needed if apksigner is being run on
   English Windows with Java 8 or older.
$ apksigner sign --ks release.jks --pass-encoding ibm437 app.apk

7. Sign an APK on Windows using a non-ASCII password KeyStore created on a
   modern OSX or Linux machine:
$ apksigner sign --ks release.jks --pass-encoding utf-8 app.apk

8. Sign an APK with rotated signing certificate:
$ apksigner sign --ks release.jks --next-signer --ks release2.jks \
    --lineage /path/to/signing/history/lineage app.apk