| /* |
| * Copyright 2019 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #define LOG_TAG "bt_shim_btm" |
| |
| #include "main/shim/btm_api.h" |
| |
| #include <base/callback.h> |
| #include <base/logging.h> |
| |
| #include <mutex> |
| |
| #include "common/metric_id_allocator.h" |
| #include "common/time_util.h" |
| #include "gd/common/callback.h" |
| #include "gd/neighbor/name.h" |
| #include "gd/os/log.h" |
| #include "gd/security/security_module.h" |
| #include "gd/security/ui.h" |
| #include "main/shim/btm.h" |
| #include "main/shim/controller.h" |
| #include "main/shim/helpers.h" |
| #include "main/shim/metric_id_api.h" |
| #include "main/shim/shim.h" |
| #include "main/shim/stack.h" |
| #include "osi/include/allocator.h" |
| #include "stack/btm/btm_int_types.h" |
| #include "stack/include/bt_hdr.h" |
| #include "stack/include/bt_octets.h" |
| #include "types/bluetooth/uuid.h" |
| #include "types/raw_address.h" |
| |
| using bluetooth::common::MetricIdAllocator; |
| |
| #define BTIF_DM_DEFAULT_INQ_MAX_RESULTS 0 |
| #define BTIF_DM_DEFAULT_INQ_MAX_DURATION 10 |
| |
| /** |
| * Legacy bluetooth module global control block state |
| * |
| * Mutex is used to synchronize access from the shim |
| * layer into the global control block. This is used |
| * by the shim despite potentially arbitrary |
| * unsynchronized access by the legacy stack. |
| */ |
| extern tBTM_CB btm_cb; |
| std::mutex btm_cb_mutex_; |
| |
| extern bool btm_inq_find_bdaddr(const RawAddress& p_bda); |
| extern tINQ_DB_ENT* btm_inq_db_find(const RawAddress& raw_address); |
| extern tINQ_DB_ENT* btm_inq_db_new(const RawAddress& p_bda); |
| |
| /** |
| * Legacy bluetooth btm stack entry points |
| */ |
| extern void btm_acl_update_inquiry_status(uint8_t status); |
| extern void btm_clear_all_pending_le_entry(void); |
| extern void btm_clr_inq_result_flt(void); |
| extern void btm_set_eir_uuid(uint8_t* p_eir, tBTM_INQ_RESULTS* p_results); |
| extern void btm_sort_inq_result(void); |
| extern void btm_process_inq_complete(uint8_t status, uint8_t result_type); |
| |
| static bool is_classic_device(tBT_DEVICE_TYPE device_type) { |
| return device_type == BT_DEVICE_TYPE_BREDR; |
| } |
| |
| static bool has_classic_device(tBT_DEVICE_TYPE device_type) { |
| return device_type & BT_DEVICE_TYPE_BREDR; |
| } |
| |
| void btm_api_process_inquiry_result(const RawAddress& raw_address, |
| uint8_t page_scan_rep_mode, |
| DEV_CLASS device_class, |
| uint16_t clock_offset) { |
| tINQ_DB_ENT* p_i = btm_inq_db_find(raw_address); |
| |
| if (p_i == nullptr) { |
| p_i = btm_inq_db_new(raw_address); |
| CHECK(p_i != nullptr); |
| } else if (p_i->inq_count == btm_cb.btm_inq_vars.inq_counter && |
| is_classic_device(p_i->inq_info.results.device_type)) { |
| return; |
| } |
| |
| p_i->inq_info.results.page_scan_rep_mode = page_scan_rep_mode; |
| p_i->inq_info.results.page_scan_per_mode = 0; // RESERVED |
| p_i->inq_info.results.page_scan_mode = 0; // RESERVED |
| p_i->inq_info.results.dev_class[0] = device_class[0]; |
| p_i->inq_info.results.dev_class[1] = device_class[1]; |
| p_i->inq_info.results.dev_class[2] = device_class[2]; |
| p_i->inq_info.results.clock_offset = clock_offset | BTM_CLOCK_OFFSET_VALID; |
| p_i->inq_info.results.inq_result_type = BTM_INQ_RESULT_BR; |
| p_i->inq_info.results.rssi = BTM_INQ_RES_IGNORE_RSSI; |
| |
| p_i->time_of_resp = bluetooth::common::time_get_os_boottime_ms(); |
| p_i->inq_count = btm_cb.btm_inq_vars.inq_counter; |
| p_i->inq_info.appl_knows_rem_name = false; |
| |
| if (p_i->inq_count != btm_cb.btm_inq_vars.inq_counter) { |
| p_i->inq_info.results.device_type = BT_DEVICE_TYPE_BREDR; |
| btm_cb.btm_inq_vars.inq_cmpl_info.num_resp++; |
| p_i->scan_rsp = false; |
| } else { |
| p_i->inq_info.results.device_type |= BT_DEVICE_TYPE_BREDR; |
| } |
| |
| if (btm_cb.btm_inq_vars.p_inq_results_cb == nullptr) { |
| return; |
| } |
| |
| (btm_cb.btm_inq_vars.p_inq_results_cb)(&p_i->inq_info.results, nullptr, 0); |
| } |
| |
| void btm_api_process_inquiry_result_with_rssi(RawAddress raw_address, |
| uint8_t page_scan_rep_mode, |
| DEV_CLASS device_class, |
| uint16_t clock_offset, |
| int8_t rssi) { |
| tINQ_DB_ENT* p_i = btm_inq_db_find(raw_address); |
| |
| bool update = false; |
| if (btm_inq_find_bdaddr(raw_address)) { |
| if (p_i != nullptr && |
| (rssi > p_i->inq_info.results.rssi || p_i->inq_info.results.rssi == 0 || |
| has_classic_device(p_i->inq_info.results.device_type))) { |
| update = true; |
| } |
| } |
| |
| bool is_new = true; |
| if (p_i == nullptr) { |
| p_i = btm_inq_db_new(raw_address); |
| CHECK(p_i != nullptr); |
| } else if (p_i->inq_count == btm_cb.btm_inq_vars.inq_counter && |
| is_classic_device(p_i->inq_info.results.device_type)) { |
| is_new = false; |
| } |
| |
| p_i->inq_info.results.rssi = rssi; |
| |
| if (is_new) { |
| p_i->inq_info.results.page_scan_rep_mode = page_scan_rep_mode; |
| p_i->inq_info.results.page_scan_per_mode = 0; // RESERVED |
| p_i->inq_info.results.page_scan_mode = 0; // RESERVED |
| p_i->inq_info.results.dev_class[0] = device_class[0]; |
| p_i->inq_info.results.dev_class[1] = device_class[1]; |
| p_i->inq_info.results.dev_class[2] = device_class[2]; |
| p_i->inq_info.results.clock_offset = clock_offset | BTM_CLOCK_OFFSET_VALID; |
| p_i->inq_info.results.inq_result_type = BTM_INQ_RESULT_BR; |
| |
| p_i->time_of_resp = bluetooth::common::time_get_os_boottime_ms(); |
| p_i->inq_count = btm_cb.btm_inq_vars.inq_counter; |
| p_i->inq_info.appl_knows_rem_name = false; |
| |
| if (p_i->inq_count != btm_cb.btm_inq_vars.inq_counter) { |
| p_i->inq_info.results.device_type = BT_DEVICE_TYPE_BREDR; |
| btm_cb.btm_inq_vars.inq_cmpl_info.num_resp++; |
| p_i->scan_rsp = false; |
| } else { |
| p_i->inq_info.results.device_type |= BT_DEVICE_TYPE_BREDR; |
| } |
| } |
| |
| if (btm_cb.btm_inq_vars.p_inq_results_cb == nullptr) { |
| return; |
| } |
| |
| if (is_new || update) { |
| (btm_cb.btm_inq_vars.p_inq_results_cb)(&p_i->inq_info.results, nullptr, 0); |
| } |
| } |
| void btm_api_process_extended_inquiry_result(RawAddress raw_address, |
| uint8_t page_scan_rep_mode, |
| DEV_CLASS device_class, |
| uint16_t clock_offset, int8_t rssi, |
| const uint8_t* eir_data, |
| size_t eir_len) { |
| tINQ_DB_ENT* p_i = btm_inq_db_find(raw_address); |
| |
| bool update = false; |
| if (btm_inq_find_bdaddr(raw_address) && p_i != nullptr) { |
| update = true; |
| } |
| |
| bool is_new = true; |
| if (p_i == nullptr) { |
| p_i = btm_inq_db_new(raw_address); |
| } else if (p_i->inq_count == btm_cb.btm_inq_vars.inq_counter && |
| (p_i->inq_info.results.device_type == BT_DEVICE_TYPE_BREDR)) { |
| is_new = false; |
| } |
| |
| p_i->inq_info.results.rssi = rssi; |
| |
| if (is_new) { |
| p_i->inq_info.results.page_scan_rep_mode = page_scan_rep_mode; |
| p_i->inq_info.results.page_scan_per_mode = 0; // RESERVED |
| p_i->inq_info.results.page_scan_mode = 0; // RESERVED |
| p_i->inq_info.results.dev_class[0] = device_class[0]; |
| p_i->inq_info.results.dev_class[1] = device_class[1]; |
| p_i->inq_info.results.dev_class[2] = device_class[2]; |
| p_i->inq_info.results.clock_offset = clock_offset | BTM_CLOCK_OFFSET_VALID; |
| p_i->inq_info.results.inq_result_type = BTM_INQ_RESULT_BR; |
| |
| p_i->time_of_resp = bluetooth::common::time_get_os_boottime_ms(); |
| p_i->inq_count = btm_cb.btm_inq_vars.inq_counter; |
| p_i->inq_info.appl_knows_rem_name = false; |
| |
| if (p_i->inq_count != btm_cb.btm_inq_vars.inq_counter) { |
| p_i->inq_info.results.device_type = BT_DEVICE_TYPE_BREDR; |
| btm_cb.btm_inq_vars.inq_cmpl_info.num_resp++; |
| p_i->scan_rsp = false; |
| } else { |
| p_i->inq_info.results.device_type |= BT_DEVICE_TYPE_BREDR; |
| } |
| } |
| |
| if (btm_cb.btm_inq_vars.p_inq_results_cb == nullptr) { |
| return; |
| } |
| |
| if (is_new || update) { |
| memset(p_i->inq_info.results.eir_uuid, 0, |
| BTM_EIR_SERVICE_ARRAY_SIZE * (BTM_EIR_ARRAY_BITS / 8)); |
| btm_set_eir_uuid(const_cast<uint8_t*>(eir_data), &p_i->inq_info.results); |
| uint8_t* p_eir_data = const_cast<uint8_t*>(eir_data); |
| (btm_cb.btm_inq_vars.p_inq_results_cb)(&p_i->inq_info.results, p_eir_data, |
| eir_len); |
| } |
| } |
| |
| namespace { |
| std::unordered_map<bluetooth::hci::AddressWithType, bt_bdname_t> |
| address_name_map_; |
| |
| std::unordered_map<bluetooth::hci::IoCapability, int> gd_legacy_io_caps_map_ = { |
| {bluetooth::hci::IoCapability::DISPLAY_ONLY, BTM_IO_CAP_OUT}, |
| {bluetooth::hci::IoCapability::DISPLAY_YES_NO, BTM_IO_CAP_IO}, |
| {bluetooth::hci::IoCapability::KEYBOARD_ONLY, BTM_IO_CAP_IN}, |
| {bluetooth::hci::IoCapability::NO_INPUT_NO_OUTPUT, BTM_IO_CAP_NONE}, |
| }; |
| |
| std::unordered_map<bluetooth::hci::AuthenticationRequirements, int> |
| gd_legacy_auth_reqs_map_ = { |
| {bluetooth::hci::AuthenticationRequirements::NO_BONDING, |
| BTM_AUTH_SP_NO}, |
| {bluetooth::hci::AuthenticationRequirements::NO_BONDING_MITM_PROTECTION, |
| BTM_AUTH_SP_YES}, |
| {bluetooth::hci::AuthenticationRequirements::DEDICATED_BONDING, |
| BTM_AUTH_AP_NO}, |
| {bluetooth::hci::AuthenticationRequirements:: |
| DEDICATED_BONDING_MITM_PROTECTION, |
| BTM_AUTH_AP_YES}, |
| {bluetooth::hci::AuthenticationRequirements::GENERAL_BONDING, |
| BTM_AUTH_SPGB_NO}, |
| {bluetooth::hci::AuthenticationRequirements:: |
| GENERAL_BONDING_MITM_PROTECTION, |
| BTM_AUTH_SPGB_YES}, |
| }; |
| } |
| |
| class ShimUi : public bluetooth::security::UI { |
| public: |
| static ShimUi* GetInstance() { |
| static ShimUi instance; |
| return &instance; |
| } |
| |
| ShimUi(const ShimUi&) = delete; |
| ShimUi& operator=(const ShimUi&) = delete; |
| |
| void SetBtaCallbacks(const tBTM_APPL_INFO* bta_callbacks) { |
| bta_callbacks_ = bta_callbacks; |
| if (bta_callbacks->p_pin_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s pin_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_link_key_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s link_key_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_auth_complete_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s auth_complete_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_bond_cancel_cmpl_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s bond_cancel_complete_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_le_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s le_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_le_key_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s le_key_callback", __func__); |
| } |
| } |
| |
| void DisplayPairingPrompt(const bluetooth::hci::AddressWithType& address, |
| std::string name) { |
| waiting_for_pairing_prompt_ = true; |
| bt_bdname_t legacy_name{0}; |
| memcpy(legacy_name.name, name.data(), name.length()); |
| // TODO(optedoblivion): Handle callback to BTA for BLE |
| } |
| |
| void Cancel(const bluetooth::hci::AddressWithType& address) { |
| LOG(WARNING) << " â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– â– " << __func__; |
| } |
| |
| void HandleConfirm(bluetooth::security::ConfirmationData data) { |
| const bluetooth::hci::AddressWithType& address = data.GetAddressWithType(); |
| uint32_t numeric_value = data.GetNumericValue(); |
| bt_bdname_t legacy_name{0}; |
| memcpy(legacy_name.name, data.GetName().data(), data.GetName().length()); |
| |
| if (bta_callbacks_->p_sp_callback) { |
| // Call sp_cback for IO_REQ |
| tBTM_SP_IO_REQ io_req_evt_data; |
| io_req_evt_data.bd_addr = bluetooth::ToRawAddress(address.GetAddress()); |
| // Local IO Caps (Phone is always DisplayYesNo) |
| io_req_evt_data.io_cap = BTM_IO_CAP_IO; |
| // Local Auth Reqs (Phone is always DEDICATED_BONDING) |
| io_req_evt_data.auth_req = BTM_AUTH_AP_NO; |
| io_req_evt_data.oob_data = BTM_OOB_NONE; |
| (*bta_callbacks_->p_sp_callback)(BTM_SP_IO_REQ_EVT, |
| (tBTM_SP_EVT_DATA*)&io_req_evt_data); |
| |
| // Call sp_cback for IO_RSP |
| tBTM_SP_IO_RSP io_rsp_evt_data; |
| io_rsp_evt_data.bd_addr = bluetooth::ToRawAddress(address.GetAddress()); |
| io_rsp_evt_data.io_cap = gd_legacy_io_caps_map_[data.GetRemoteIoCaps()]; |
| io_rsp_evt_data.auth_req = |
| gd_legacy_auth_reqs_map_[data.GetRemoteAuthReqs()]; |
| io_rsp_evt_data.auth_req = BTM_AUTH_AP_YES; |
| io_rsp_evt_data.oob_data = BTM_OOB_NONE; |
| (*bta_callbacks_->p_sp_callback)(BTM_SP_IO_RSP_EVT, |
| (tBTM_SP_EVT_DATA*)&io_rsp_evt_data); |
| |
| // Call sp_cback for USER_CONFIRMATION |
| tBTM_SP_EVT_DATA user_cfm_req_evt_data; |
| user_cfm_req_evt_data.cfm_req.bd_addr = |
| bluetooth::ToRawAddress(address.GetAddress()); |
| user_cfm_req_evt_data.cfm_req.num_val = numeric_value; |
| // If we pop a dialog then it isn't just_works |
| user_cfm_req_evt_data.cfm_req.just_works = data.IsJustWorks(); |
| |
| address_name_map_.emplace(address, legacy_name); |
| memcpy((char*)user_cfm_req_evt_data.cfm_req.bd_name, legacy_name.name, |
| BD_NAME_LEN); |
| |
| (*bta_callbacks_->p_sp_callback)(BTM_SP_CFM_REQ_EVT, |
| &user_cfm_req_evt_data); |
| } |
| } |
| |
| void DisplayConfirmValue(bluetooth::security::ConfirmationData data) { |
| waiting_for_pairing_prompt_ = false; |
| data.SetJustWorks(false); |
| HandleConfirm(data); |
| } |
| |
| void DisplayYesNoDialog(bluetooth::security::ConfirmationData data) { |
| waiting_for_pairing_prompt_ = false; |
| data.SetJustWorks(true); |
| HandleConfirm(data); |
| } |
| |
| void DisplayEnterPasskeyDialog(bluetooth::security::ConfirmationData data) { |
| waiting_for_pairing_prompt_ = false; |
| LOG_WARN("UNIMPLEMENTED, Passkey not supported in GD"); |
| } |
| |
| void DisplayPasskey(bluetooth::security::ConfirmationData data) { |
| waiting_for_pairing_prompt_ = false; |
| LOG_WARN("UNIMPLEMENTED, Passkey not supported in GD"); |
| } |
| |
| void DisplayEnterPinDialog(bluetooth::security::ConfirmationData data) { |
| waiting_for_pairing_prompt_ = false; |
| LOG_WARN("UNIMPLEMENTED, PIN not supported in GD"); |
| } |
| |
| bool waiting_for_pairing_prompt_ = false; |
| |
| private: |
| ShimUi() : bta_callbacks_(nullptr) {} |
| ~ShimUi() {} |
| const tBTM_APPL_INFO* bta_callbacks_; |
| }; |
| |
| ShimUi* shim_ui_ = nullptr; |
| |
| class ShimBondListener : public bluetooth::security::ISecurityManagerListener { |
| public: |
| static ShimBondListener* GetInstance() { |
| static ShimBondListener instance; |
| return &instance; |
| } |
| |
| ShimBondListener(const ShimBondListener&) = delete; |
| ShimBondListener& operator=(const ShimBondListener&) = delete; |
| |
| void SetBtaCallbacks(const tBTM_APPL_INFO* bta_callbacks) { |
| bta_callbacks_ = bta_callbacks; |
| if (bta_callbacks->p_pin_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s pin_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_link_key_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s link_key_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_auth_complete_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s auth_complete_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_bond_cancel_cmpl_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s bond_cancel_complete_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_le_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s le_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_le_key_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s le_key_callback", __func__); |
| } |
| } |
| |
| void OnDeviceBonded(bluetooth::hci::AddressWithType device) override { |
| // Call sp_cback for LINK_KEY_NOTIFICATION |
| // Call AUTHENTICATION_COMPLETE callback |
| if (device.GetAddressType() == |
| bluetooth::hci::AddressType::PUBLIC_DEVICE_ADDRESS) { |
| auto it = address_name_map_.find(device); |
| bt_bdname_t tmp_name; |
| if (it != address_name_map_.end()) { |
| tmp_name = it->second; |
| } |
| BD_NAME name; |
| memcpy((char*)name, tmp_name.name, BD_NAME_LEN); |
| |
| if (*bta_callbacks_->p_link_key_callback) { |
| LinkKey key; // Never want to send the key to the stack |
| (*bta_callbacks_->p_link_key_callback)( |
| bluetooth::ToRawAddress(device.GetAddress()), 0, name, key, |
| BTM_LKEY_TYPE_COMBINATION); |
| } |
| if (*bta_callbacks_->p_auth_complete_callback) { |
| (*bta_callbacks_->p_auth_complete_callback)( |
| bluetooth::ToRawAddress(device.GetAddress()), 0, name, HCI_SUCCESS); |
| } |
| } |
| bool is_gd_enabled = bluetooth::shim::is_any_gd_enabled(); |
| if (is_gd_enabled) { |
| bluetooth::shim::AllocateIdFromMetricIdAllocator( |
| bluetooth::ToRawAddress(device.GetAddress())); |
| } else { |
| MetricIdAllocator::GetInstance().AllocateId( |
| bluetooth::ToRawAddress(device.GetAddress())); |
| } |
| bool is_saving_successful = |
| is_gd_enabled ? bluetooth::shim::SaveDeviceOnMetricIdAllocator( |
| bluetooth::ToRawAddress(device.GetAddress())) |
| : MetricIdAllocator::GetInstance().SaveDevice( |
| bluetooth::ToRawAddress(device.GetAddress())); |
| if (!is_saving_successful) { |
| LOG(FATAL) << __func__ << ": Fail to save metric id for device " |
| << bluetooth::ToRawAddress(device.GetAddress()); |
| } |
| } |
| |
| void OnDeviceUnbonded(bluetooth::hci::AddressWithType device) override { |
| if (bta_callbacks_->p_bond_cancel_cmpl_callback) { |
| (*bta_callbacks_->p_bond_cancel_cmpl_callback)(BTM_SUCCESS); |
| } |
| if (bluetooth::shim::is_any_gd_enabled()) { |
| bluetooth::shim::ForgetDeviceFromMetricIdAllocator( |
| bluetooth::ToRawAddress(device.GetAddress())); |
| } else { |
| MetricIdAllocator::GetInstance().ForgetDevice( |
| bluetooth::ToRawAddress(device.GetAddress())); |
| } |
| } |
| |
| void OnDeviceBondFailed(bluetooth::hci::AddressWithType device, |
| bluetooth::security::PairingFailure status) override { |
| auto it = address_name_map_.find(device); |
| bt_bdname_t tmp_name; |
| if (it != address_name_map_.end()) { |
| tmp_name = it->second; |
| } |
| BD_NAME name; |
| memcpy((char*)name, tmp_name.name, BD_NAME_LEN); |
| |
| if (bta_callbacks_->p_auth_complete_callback) { |
| (*bta_callbacks_->p_auth_complete_callback)( |
| bluetooth::ToRawAddress(device.GetAddress()), 0, name, |
| HCI_ERR_AUTH_FAILURE); |
| } |
| } |
| |
| void OnEncryptionStateChanged( |
| bluetooth::hci::EncryptionChangeView encryption_change_view) override { |
| // TODO(optedoblivion): Find BTA callback for this to call |
| } |
| |
| private: |
| ShimBondListener() : bta_callbacks_(nullptr) {} |
| ~ShimBondListener() {} |
| const tBTM_APPL_INFO* bta_callbacks_; |
| }; |
| |
| tBTM_STATUS bluetooth::shim::BTM_StartInquiry(tBTM_INQ_RESULTS_CB* p_results_cb, |
| tBTM_CMPL_CB* p_cmpl_cb) { |
| CHECK(p_results_cb != nullptr); |
| CHECK(p_cmpl_cb != nullptr); |
| |
| tBTM_INQ_PARMS inqparms = {}; |
| inqparms.mode = BTM_GENERAL_INQUIRY | BTM_BLE_GENERAL_INQUIRY; |
| inqparms.duration = BTIF_DM_DEFAULT_INQ_MAX_DURATION; |
| |
| std::lock_guard<std::mutex> lock(btm_cb_mutex_); |
| |
| btm_cb.btm_inq_vars.inq_cmpl_info.num_resp = 0; |
| |
| Stack::GetInstance()->GetBtm()->StartActiveScanning(); |
| if (inqparms.duration != 0) { |
| Stack::GetInstance()->GetBtm()->SetScanningTimer( |
| inqparms.duration * 1000, common::BindOnce([]() { |
| LOG_INFO("%s scanning timeout popped", __func__); |
| std::lock_guard<std::mutex> lock(btm_cb_mutex_); |
| Stack::GetInstance()->GetBtm()->StopActiveScanning(); |
| })); |
| } |
| |
| Stack::GetInstance()->GetBtm()->StartActiveScanning(); |
| |
| uint8_t classic_mode = inqparms.mode & 0x0f; |
| if (!Stack::GetInstance()->GetBtm()->StartInquiry( |
| classic_mode, inqparms.duration, 0, |
| [](tBTM_STATUS status, uint8_t inquiry_mode) { |
| LOG_INFO("%s Inquiry is complete status:%hd inquiry_mode:%hhd", |
| __func__, status, inquiry_mode); |
| btm_cb.btm_inq_vars.inqparms.mode &= ~(inquiry_mode); |
| |
| btm_acl_update_inquiry_status(BTM_INQUIRY_COMPLETE); |
| if (btm_cb.btm_inq_vars.inq_active) { |
| btm_cb.btm_inq_vars.inq_cmpl_info.status = status; |
| btm_clear_all_pending_le_entry(); |
| btm_cb.btm_inq_vars.state = BTM_INQ_INACTIVE_STATE; |
| |
| /* Increment so the start of a next inquiry has a new count */ |
| btm_cb.btm_inq_vars.inq_counter++; |
| |
| btm_clr_inq_result_flt(); |
| |
| if ((status == BTM_SUCCESS) && |
| controller_get_interface() |
| ->supports_rssi_with_inquiry_results()) { |
| btm_sort_inq_result(); |
| } |
| |
| btm_cb.btm_inq_vars.inq_active = BTM_INQUIRY_INACTIVE; |
| btm_cb.btm_inq_vars.p_inq_results_cb = nullptr; |
| btm_cb.btm_inq_vars.p_inq_cmpl_cb = nullptr; |
| |
| if (btm_cb.btm_inq_vars.p_inq_cmpl_cb != nullptr) { |
| LOG_INFO("%s Sending inquiry completion to upper layer", |
| __func__); |
| (btm_cb.btm_inq_vars.p_inq_cmpl_cb)( |
| (tBTM_INQUIRY_CMPL*)&btm_cb.btm_inq_vars.inq_cmpl_info); |
| btm_cb.btm_inq_vars.p_inq_cmpl_cb = nullptr; |
| } |
| } |
| })) { |
| LOG_WARN("%s Unable to start inquiry", __func__); |
| return BTM_ERR_PROCESSING; |
| } |
| |
| btm_cb.btm_inq_vars.state = BTM_INQ_ACTIVE_STATE; |
| btm_cb.btm_inq_vars.p_inq_cmpl_cb = p_cmpl_cb; |
| btm_cb.btm_inq_vars.p_inq_results_cb = p_results_cb; |
| btm_cb.btm_inq_vars.inq_active = inqparms.mode; |
| |
| btm_acl_update_inquiry_status(BTM_INQUIRY_STARTED); |
| |
| return BTM_CMD_STARTED; |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_SetDiscoverability(uint16_t discoverable_mode, |
| uint16_t window, |
| uint16_t interval) { |
| uint16_t classic_discoverable_mode = discoverable_mode & 0xff; |
| uint16_t le_discoverable_mode = discoverable_mode >> 8; |
| |
| if (window == 0) window = BTM_DEFAULT_DISC_WINDOW; |
| if (interval == 0) interval = BTM_DEFAULT_DISC_INTERVAL; |
| |
| switch (le_discoverable_mode) { |
| case kDiscoverableModeOff: |
| Stack::GetInstance()->GetBtm()->StopAdvertising(); |
| break; |
| case kLimitedDiscoverableMode: |
| case kGeneralDiscoverableMode: |
| Stack::GetInstance()->GetBtm()->StartAdvertising(); |
| break; |
| default: |
| LOG_WARN("%s Unexpected le discoverability mode:%d", __func__, |
| le_discoverable_mode); |
| } |
| |
| switch (classic_discoverable_mode) { |
| case kDiscoverableModeOff: |
| Stack::GetInstance()->GetBtm()->SetClassicDiscoverabilityOff(); |
| break; |
| case kLimitedDiscoverableMode: |
| Stack::GetInstance()->GetBtm()->SetClassicLimitedDiscoverability( |
| window, interval); |
| break; |
| case kGeneralDiscoverableMode: |
| Stack::GetInstance()->GetBtm()->SetClassicGeneralDiscoverability( |
| window, interval); |
| break; |
| default: |
| LOG_WARN("%s Unexpected classic discoverability mode:%d", __func__, |
| classic_discoverable_mode); |
| } |
| return BTM_SUCCESS; |
| } |
| |
| void bluetooth::shim::BTM_EnableInterlacedInquiryScan() { |
| Stack::GetInstance()->GetBtm()->SetInterlacedInquiryScan(); |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_BleObserve(bool start, uint8_t duration_sec, |
| tBTM_INQ_RESULTS_CB* p_results_cb, |
| tBTM_CMPL_CB* p_cmpl_cb) { |
| if (start) { |
| CHECK(p_results_cb != nullptr); |
| CHECK(p_cmpl_cb != nullptr); |
| |
| std::lock_guard<std::mutex> lock(btm_cb_mutex_); |
| |
| if (btm_cb.ble_ctr_cb.is_ble_observe_active()) { |
| if (duration_sec == 0) { |
| Stack::GetInstance()->GetBtm()->CancelObservingTimer(); |
| return BTM_CMD_STARTED; |
| } |
| LOG_WARN("%s Observing already active", __func__); |
| return BTM_WRONG_MODE; |
| } |
| |
| btm_cb.ble_ctr_cb.p_obs_results_cb = p_results_cb; |
| btm_cb.ble_ctr_cb.p_obs_cmpl_cb = p_cmpl_cb; |
| Stack::GetInstance()->GetBtm()->StartObserving(); |
| btm_cb.ble_ctr_cb.set_ble_observe_active(); |
| |
| if (duration_sec != 0) { |
| Stack::GetInstance()->GetBtm()->SetObservingTimer( |
| duration_sec * 1000, common::BindOnce([]() { |
| LOG_INFO("%s observing timeout popped", __func__); |
| |
| Stack::GetInstance()->GetBtm()->CancelObservingTimer(); |
| Stack::GetInstance()->GetBtm()->StopObserving(); |
| |
| std::lock_guard<std::mutex> lock(btm_cb_mutex_); |
| btm_cb.ble_ctr_cb.reset_ble_observe(); |
| |
| if (btm_cb.ble_ctr_cb.p_obs_cmpl_cb) { |
| (btm_cb.ble_ctr_cb.p_obs_cmpl_cb)( |
| &btm_cb.btm_inq_vars.inq_cmpl_info); |
| } |
| btm_cb.ble_ctr_cb.p_obs_results_cb = nullptr; |
| btm_cb.ble_ctr_cb.p_obs_cmpl_cb = nullptr; |
| |
| btm_cb.btm_inq_vars.inqparms.mode &= ~(BTM_BLE_INQUIRY_MASK); |
| |
| btm_acl_update_inquiry_status(BTM_INQUIRY_COMPLETE); |
| |
| btm_clear_all_pending_le_entry(); |
| btm_cb.btm_inq_vars.state = BTM_INQ_INACTIVE_STATE; |
| |
| btm_cb.btm_inq_vars.inq_counter++; |
| btm_clr_inq_result_flt(); |
| btm_sort_inq_result(); |
| |
| btm_cb.btm_inq_vars.inq_active = BTM_INQUIRY_INACTIVE; |
| btm_cb.btm_inq_vars.p_inq_results_cb = NULL; |
| btm_cb.btm_inq_vars.p_inq_cmpl_cb = NULL; |
| |
| if (btm_cb.btm_inq_vars.p_inq_cmpl_cb) { |
| (btm_cb.btm_inq_vars.p_inq_cmpl_cb)( |
| (tBTM_INQUIRY_CMPL*)&btm_cb.btm_inq_vars.inq_cmpl_info); |
| btm_cb.btm_inq_vars.p_inq_cmpl_cb = nullptr; |
| } |
| })); |
| } |
| } else { |
| std::lock_guard<std::mutex> lock(btm_cb_mutex_); |
| |
| if (!btm_cb.ble_ctr_cb.is_ble_observe_active()) { |
| LOG_WARN("%s Observing already inactive", __func__); |
| } |
| Stack::GetInstance()->GetBtm()->CancelObservingTimer(); |
| Stack::GetInstance()->GetBtm()->StopObserving(); |
| btm_cb.ble_ctr_cb.reset_ble_observe(); |
| Stack::GetInstance()->GetBtm()->StopObserving(); |
| if (btm_cb.ble_ctr_cb.p_obs_cmpl_cb) { |
| (btm_cb.ble_ctr_cb.p_obs_cmpl_cb)(&btm_cb.btm_inq_vars.inq_cmpl_info); |
| } |
| btm_cb.ble_ctr_cb.p_obs_results_cb = nullptr; |
| btm_cb.ble_ctr_cb.p_obs_cmpl_cb = nullptr; |
| } |
| return BTM_CMD_STARTED; |
| } |
| |
| void bluetooth::shim::BTM_BleOpportunisticObserve( |
| bool enable, tBTM_INQ_RESULTS_CB* p_results_cb) { |
| if (enable) { |
| btm_cb.ble_ctr_cb.p_opportunistic_obs_results_cb = p_results_cb; |
| } else { |
| btm_cb.ble_ctr_cb.p_opportunistic_obs_results_cb = nullptr; |
| } |
| } |
| |
| void bluetooth::shim::BTM_EnableInterlacedPageScan() { |
| Stack::GetInstance()->GetBtm()->SetInterlacedPageScan(); |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_SetInquiryMode(uint8_t inquiry_mode) { |
| switch (inquiry_mode) { |
| case kStandardInquiryResult: |
| Stack::GetInstance()->GetBtm()->SetStandardInquiryResultMode(); |
| break; |
| case kInquiryResultWithRssi: |
| Stack::GetInstance()->GetBtm()->SetInquiryWithRssiResultMode(); |
| break; |
| case kExtendedInquiryResult: |
| Stack::GetInstance()->GetBtm()->SetExtendedInquiryResultMode(); |
| break; |
| default: |
| return BTM_ILLEGAL_VALUE; |
| } |
| return BTM_SUCCESS; |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_SetConnectability(uint16_t page_mode, |
| uint16_t window, |
| uint16_t interval) { |
| uint16_t classic_connectible_mode = page_mode & 0xff; |
| uint16_t le_connectible_mode = page_mode >> 8; |
| |
| if (!window) window = BTM_DEFAULT_CONN_WINDOW; |
| if (!interval) interval = BTM_DEFAULT_CONN_INTERVAL; |
| |
| switch (le_connectible_mode) { |
| case kConnectibleModeOff: |
| Stack::GetInstance()->GetBtm()->StopConnectability(); |
| break; |
| case kConnectibleModeOn: |
| Stack::GetInstance()->GetBtm()->StartConnectability(); |
| break; |
| default: |
| return BTM_ILLEGAL_VALUE; |
| break; |
| } |
| |
| switch (classic_connectible_mode) { |
| case kConnectibleModeOff: |
| Stack::GetInstance()->GetBtm()->SetClassicConnectibleOff(); |
| break; |
| case kConnectibleModeOn: |
| Stack::GetInstance()->GetBtm()->SetClassicConnectibleOn(); |
| break; |
| default: |
| return BTM_ILLEGAL_VALUE; |
| break; |
| } |
| return BTM_SUCCESS; |
| } |
| |
| uint16_t bluetooth::shim::BTM_IsInquiryActive(void) { |
| if (Stack::GetInstance()->GetBtm()->IsGeneralInquiryActive()) { |
| return BTM_GENERAL_INQUIRY_ACTIVE; |
| } |
| return BTM_INQUIRY_INACTIVE; |
| } |
| |
| void bluetooth::shim::BTM_CancelInquiry(void) { |
| LOG_INFO("%s Cancel inquiry", __func__); |
| Stack::GetInstance()->GetBtm()->CancelInquiry(); |
| |
| btm_cb.btm_inq_vars.state = BTM_INQ_INACTIVE_STATE; |
| btm_clr_inq_result_flt(); |
| |
| Stack::GetInstance()->GetBtm()->CancelScanningTimer(); |
| Stack::GetInstance()->GetBtm()->StopActiveScanning(); |
| |
| btm_cb.ble_ctr_cb.reset_ble_inquiry(); |
| |
| btm_cb.btm_inq_vars.inqparms.mode &= |
| ~(btm_cb.btm_inq_vars.inqparms.mode & BTM_BLE_INQUIRY_MASK); |
| |
| btm_acl_update_inquiry_status(BTM_INQUIRY_COMPLETE); |
| /* Ignore any stray or late complete messages if the inquiry is not active */ |
| if (btm_cb.btm_inq_vars.inq_active) { |
| btm_cb.btm_inq_vars.inq_cmpl_info.status = BTM_SUCCESS; |
| btm_clear_all_pending_le_entry(); |
| |
| if (controller_get_interface()->supports_rssi_with_inquiry_results()) { |
| btm_sort_inq_result(); |
| } |
| |
| btm_cb.btm_inq_vars.inq_active = BTM_INQUIRY_INACTIVE; |
| btm_cb.btm_inq_vars.p_inq_results_cb = nullptr; |
| btm_cb.btm_inq_vars.p_inq_cmpl_cb = nullptr; |
| btm_cb.btm_inq_vars.inq_counter++; |
| |
| if (btm_cb.btm_inq_vars.p_inq_cmpl_cb != nullptr) { |
| LOG_INFO("%s Sending cancel inquiry completion to upper layer", __func__); |
| (btm_cb.btm_inq_vars.p_inq_cmpl_cb)( |
| (tBTM_INQUIRY_CMPL*)&btm_cb.btm_inq_vars.inq_cmpl_info); |
| btm_cb.btm_inq_vars.p_inq_cmpl_cb = nullptr; |
| } |
| } |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_ReadRemoteDeviceName( |
| const RawAddress& raw_address, tBTM_CMPL_CB* callback, |
| tBT_TRANSPORT transport) { |
| CHECK(callback != nullptr); |
| tBTM_STATUS status = BTM_NO_RESOURCES; |
| |
| switch (transport) { |
| case BT_TRANSPORT_LE: |
| status = Stack::GetInstance()->GetBtm()->ReadLeRemoteDeviceName( |
| raw_address, callback); |
| break; |
| case BT_TRANSPORT_BR_EDR: |
| status = Stack::GetInstance()->GetBtm()->ReadClassicRemoteDeviceName( |
| raw_address, callback); |
| break; |
| default: |
| LOG_WARN("%s Unspecified transport:%d", __func__, transport); |
| break; |
| } |
| return status; |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_CancelRemoteDeviceName(void) { |
| return Stack::GetInstance()->GetBtm()->CancelAllReadRemoteDeviceName(); |
| } |
| |
| tBTM_INQ_INFO* bluetooth::shim::BTM_InqDbRead(const RawAddress& p_bda) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| return nullptr; |
| } |
| |
| tBTM_INQ_INFO* bluetooth::shim::BTM_InqDbFirst(void) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| return nullptr; |
| } |
| |
| tBTM_INQ_INFO* bluetooth::shim::BTM_InqDbNext(tBTM_INQ_INFO* p_cur) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_cur != nullptr); |
| return nullptr; |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_ClearInqDb(const RawAddress* p_bda) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| if (p_bda == nullptr) { |
| // clear all entries |
| } else { |
| // clear specific entry |
| } |
| return BTM_NO_RESOURCES; |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_WriteEIR(BT_HDR* p_buff) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_buff != nullptr); |
| osi_free(p_buff); |
| return BTM_NO_RESOURCES; |
| } |
| |
| bool bluetooth::shim::BTM_HasEirService(const uint32_t* p_eir_uuid, |
| uint16_t uuid16) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_eir_uuid != nullptr); |
| return false; |
| } |
| |
| tBTM_EIR_SEARCH_RESULT bluetooth::shim::BTM_HasInquiryEirService( |
| tBTM_INQ_RESULTS* p_results, uint16_t uuid16) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_results != nullptr); |
| return BTM_EIR_UNKNOWN; |
| } |
| |
| void bluetooth::shim::BTM_AddEirService(uint32_t* p_eir_uuid, uint16_t uuid16) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_eir_uuid != nullptr); |
| } |
| |
| void bluetooth::shim::BTM_RemoveEirService(uint32_t* p_eir_uuid, |
| uint16_t uuid16) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_eir_uuid != nullptr); |
| } |
| |
| void bluetooth::shim::BTM_SecAddBleDevice(const RawAddress& bd_addr, |
| tBT_DEVICE_TYPE dev_type, |
| tBLE_ADDR_TYPE addr_type) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_SecAddBleKey(const RawAddress& bd_addr, |
| tBTM_LE_KEY_VALUE* p_le_key, |
| tBTM_LE_KEY_TYPE key_type) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_le_key != nullptr); |
| } |
| |
| void bluetooth::shim::BTM_BleLoadLocalKeys(uint8_t key_type, |
| tBTM_BLE_LOCAL_KEYS* p_key) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_key != nullptr); |
| } |
| |
| static Octet16 bogus_root; |
| |
| /** Returns local device encryption root (ER) */ |
| const Octet16& bluetooth::shim::BTM_GetDeviceEncRoot() { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| return bogus_root; |
| } |
| |
| /** Returns local device identity root (IR). */ |
| const Octet16& bluetooth::shim::BTM_GetDeviceIDRoot() { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| return bogus_root; |
| } |
| |
| /** Return local device DHK. */ |
| const Octet16& bluetooth::shim::BTM_GetDeviceDHK() { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| return bogus_root; |
| } |
| |
| void bluetooth::shim::BTM_ReadConnectionAddr(const RawAddress& remote_bda, |
| RawAddress& local_conn_addr, |
| tBLE_ADDR_TYPE* p_addr_type) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_addr_type != nullptr); |
| } |
| |
| bool bluetooth::shim::BTM_ReadRemoteConnectionAddr( |
| const RawAddress& pseudo_addr, RawAddress& conn_addr, |
| tBLE_ADDR_TYPE* p_addr_type) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_addr_type != nullptr); |
| return false; |
| } |
| |
| void bluetooth::shim::BTM_SecurityGrant(const RawAddress& bd_addr, |
| uint8_t res) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_BleOobDataReply(const RawAddress& bd_addr, |
| uint8_t res, uint8_t len, |
| uint8_t* p_data) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_data != nullptr); |
| } |
| |
| void bluetooth::shim::BTM_BleSecureConnectionOobDataReply( |
| const RawAddress& bd_addr, uint8_t* p_c, uint8_t* p_r) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_c != nullptr); |
| CHECK(p_r != nullptr); |
| } |
| |
| void bluetooth::shim::BTM_BleSetConnScanParams(uint32_t scan_interval, |
| uint32_t scan_window) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_BleSetPrefConnParams(const RawAddress& bd_addr, |
| uint16_t min_conn_int, |
| uint16_t max_conn_int, |
| uint16_t peripheral_latency, |
| uint16_t supervision_tout) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_ReadDevInfo(const RawAddress& remote_bda, |
| tBT_DEVICE_TYPE* p_dev_type, |
| tBLE_ADDR_TYPE* p_addr_type) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_dev_type != nullptr); |
| CHECK(p_addr_type != nullptr); |
| } |
| |
| bool bluetooth::shim::BTM_ReadConnectedTransportAddress( |
| RawAddress* remote_bda, tBT_TRANSPORT transport) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(remote_bda != nullptr); |
| return false; |
| } |
| |
| void bluetooth::shim::BTM_BleReceiverTest(uint8_t rx_freq, |
| tBTM_CMPL_CB* p_cmd_cmpl_cback) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_cmd_cmpl_cback != nullptr); |
| } |
| |
| void bluetooth::shim::BTM_BleTransmitterTest(uint8_t tx_freq, |
| uint8_t test_data_len, |
| uint8_t packet_payload, |
| tBTM_CMPL_CB* p_cmd_cmpl_cback) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_cmd_cmpl_cback != nullptr); |
| } |
| |
| void bluetooth::shim::BTM_BleTestEnd(tBTM_CMPL_CB* p_cmd_cmpl_cback) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_cmd_cmpl_cback != nullptr); |
| } |
| |
| bool bluetooth::shim::BTM_UseLeLink(const RawAddress& raw_address) { |
| return Stack::GetInstance()->GetBtm()->UseLeLink(raw_address); |
| } |
| |
| void bluetooth::shim::BTM_BleReadPhy( |
| const RawAddress& bd_addr, |
| base::Callback<void(uint8_t tx_phy, uint8_t rx_phy, uint8_t status)> cb) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_BleSetPhy(const RawAddress& bd_addr, uint8_t tx_phys, |
| uint8_t rx_phys, uint16_t phy_options) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| bool bluetooth::shim::BTM_BleDataSignature(const RawAddress& bd_addr, |
| uint8_t* p_text, uint16_t len, |
| BLE_SIGNATURE signature) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_text != nullptr); |
| return false; |
| } |
| |
| bool bluetooth::shim::BTM_BleVerifySignature(const RawAddress& bd_addr, |
| uint8_t* p_orig, uint16_t len, |
| uint32_t counter, |
| uint8_t* p_comp) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_orig != nullptr); |
| CHECK(p_comp != nullptr); |
| return false; |
| } |
| |
| bool bluetooth::shim::BTM_GetLeSecurityState(const RawAddress& bd_addr, |
| uint8_t* p_le_dev_sec_flags, |
| uint8_t* p_le_key_size) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| CHECK(p_le_dev_sec_flags != nullptr); |
| CHECK(p_le_key_size != nullptr); |
| return false; |
| } |
| |
| bool bluetooth::shim::BTM_BleSecurityProcedureIsRunning( |
| const RawAddress& bd_addr) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| return false; |
| } |
| |
| uint8_t bluetooth::shim::BTM_BleGetSupportedKeySize(const RawAddress& bd_addr) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| return 0; |
| } |
| |
| /** |
| * This function update(add,delete or clear) the adv local name filtering |
| * condition. |
| */ |
| void bluetooth::shim::BTM_LE_PF_local_name(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_FILT_INDEX filt_index, |
| std::vector<uint8_t> name, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_LE_PF_srvc_data(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_FILT_INDEX filt_index) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_LE_PF_manu_data( |
| tBTM_BLE_SCAN_COND_OP action, tBTM_BLE_PF_FILT_INDEX filt_index, |
| uint16_t company_id, uint16_t company_id_mask, std::vector<uint8_t> data, |
| std::vector<uint8_t> data_mask, tBTM_BLE_PF_CFG_CBACK cb) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_LE_PF_srvc_data_pattern( |
| tBTM_BLE_SCAN_COND_OP action, tBTM_BLE_PF_FILT_INDEX filt_index, |
| std::vector<uint8_t> data, std::vector<uint8_t> data_mask, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_LE_PF_addr_filter(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_FILT_INDEX filt_index, |
| tBLE_BD_ADDR addr, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_LE_PF_uuid_filter(tBTM_BLE_SCAN_COND_OP action, |
| tBTM_BLE_PF_FILT_INDEX filt_index, |
| tBTM_BLE_PF_COND_TYPE filter_type, |
| const bluetooth::Uuid& uuid, |
| tBTM_BLE_PF_LOGIC_TYPE cond_logic, |
| const bluetooth::Uuid& uuid_mask, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_LE_PF_set(tBTM_BLE_PF_FILT_INDEX filt_index, |
| std::vector<ApcfCommand> commands, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_LE_PF_clear(tBTM_BLE_PF_FILT_INDEX filt_index, |
| tBTM_BLE_PF_CFG_CBACK cb) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_BleAdvFilterParamSetup( |
| tBTM_BLE_SCAN_COND_OP action, tBTM_BLE_PF_FILT_INDEX filt_index, |
| std::unique_ptr<btgatt_filt_param_setup_t> p_filt_params, |
| tBTM_BLE_PF_PARAM_CB cb) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| void bluetooth::shim::BTM_BleEnableDisableFilterFeature( |
| uint8_t enable, tBTM_BLE_PF_STATUS_CBACK p_stat_cback) { |
| LOG_INFO("UNIMPLEMENTED %s", __func__); |
| } |
| |
| uint8_t bluetooth::shim::BTM_BleMaxMultiAdvInstanceCount() { |
| return Stack::GetInstance()->GetBtm()->GetNumberOfAdvertisingInstances(); |
| } |
| |
| bool bluetooth::shim::BTM_BleLocalPrivacyEnabled(void) { |
| return controller_get_interface()->supports_ble_privacy(); |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_SecBond(const RawAddress& bd_addr, |
| tBLE_ADDR_TYPE addr_type, |
| tBT_TRANSPORT transport, |
| tBT_DEVICE_TYPE device_type) { |
| return Stack::GetInstance()->GetBtm()->CreateBond(bd_addr, addr_type, |
| transport, device_type); |
| } |
| |
| bool bluetooth::shim::BTM_SecRegister(const tBTM_APPL_INFO* bta_callbacks) { |
| CHECK(bta_callbacks != nullptr); |
| LOG_INFO("%s Registering security application", __func__); |
| |
| if (bta_callbacks->p_pin_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s pin_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_link_key_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s link_key_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_auth_complete_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s auth_complete_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_bond_cancel_cmpl_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s bond_cancel_complete_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_le_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s le_callback", __func__); |
| } |
| |
| if (bta_callbacks->p_le_key_callback == nullptr) { |
| LOG_INFO("UNIMPLEMENTED %s le_key_callback", __func__); |
| } |
| |
| ShimBondListener::GetInstance()->SetBtaCallbacks(bta_callbacks); |
| |
| bluetooth::shim::GetSecurityModule() |
| ->GetSecurityManager() |
| ->RegisterCallbackListener(ShimBondListener::GetInstance(), |
| bluetooth::shim::GetGdShimHandler()); |
| |
| ShimUi::GetInstance()->SetBtaCallbacks(bta_callbacks); |
| |
| bluetooth::shim::GetSecurityModule() |
| ->GetSecurityManager() |
| ->SetUserInterfaceHandler(ShimUi::GetInstance(), |
| bluetooth::shim::GetGdShimHandler()); |
| |
| return true; |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_SecBondCancel(const RawAddress& bd_addr) { |
| if (Stack::GetInstance()->GetBtm()->CancelBond(bd_addr)) { |
| return BTM_SUCCESS; |
| } else { |
| return BTM_UNKNOWN_ADDR; |
| } |
| } |
| |
| bool bluetooth::shim::BTM_SecAddDevice(const RawAddress& bd_addr, |
| DEV_CLASS dev_class, BD_NAME bd_name, |
| uint8_t* features, LinkKey* link_key, |
| uint8_t key_type, uint8_t pin_length) { |
| // Check if GD has a security record for the device |
| return BTM_SUCCESS; |
| } |
| |
| bool bluetooth::shim::BTM_SecDeleteDevice(const RawAddress& bd_addr) { |
| return Stack::GetInstance()->GetBtm()->RemoveBond(bd_addr); |
| } |
| |
| void bluetooth::shim::BTM_ConfirmReqReply(tBTM_STATUS res, |
| const RawAddress& bd_addr) { |
| // Send for both Classic and LE until we can determine the type |
| bool accept = res == BTM_SUCCESS; |
| hci::AddressWithType address = ToAddressWithType(bd_addr, 0); |
| hci::AddressWithType address2 = ToAddressWithType(bd_addr, 1); |
| auto security_manager = |
| bluetooth::shim::GetSecurityModule()->GetSecurityManager(); |
| if (ShimUi::GetInstance()->waiting_for_pairing_prompt_) { |
| LOG(INFO) << "interpreting confirmation as pairing accept " << address; |
| security_manager->OnPairingPromptAccepted(address, accept); |
| security_manager->OnPairingPromptAccepted(address2, accept); |
| ShimUi::GetInstance()->waiting_for_pairing_prompt_ = false; |
| } else { |
| LOG(INFO) << "interpreting confirmation as yes/no confirmation " << address; |
| security_manager->OnConfirmYesNo(address, accept); |
| security_manager->OnConfirmYesNo(address2, accept); |
| } |
| } |
| |
| uint16_t bluetooth::shim::BTM_GetHCIConnHandle(const RawAddress& remote_bda, |
| tBT_TRANSPORT transport) { |
| return Stack::GetInstance()->GetBtm()->GetAclHandle(remote_bda, transport); |
| } |
| |
| static void remote_name_request_complete_noop(void* p_name){ |
| // Should notify BTM_Sec, but we should use GD SMP. |
| }; |
| |
| void bluetooth::shim::SendRemoteNameRequest(const RawAddress& raw_address) { |
| Stack::GetInstance()->GetBtm()->ReadClassicRemoteDeviceName( |
| raw_address, remote_name_request_complete_noop); |
| } |
| |
| tBTM_STATUS bluetooth::shim::btm_sec_mx_access_request( |
| const RawAddress& bd_addr, bool is_originator, |
| uint16_t security_requirement, tBTM_SEC_CALLBACK* p_callback, |
| void* p_ref_data) { |
| // Security has already been fulfilled by the l2cap connection, so reply back |
| // that everything is totally fine and legit and definitely not two kids in a |
| // trenchcoat |
| |
| if (p_callback) { |
| (*p_callback)(&bd_addr, false, p_ref_data, BTM_SUCCESS); |
| } |
| return BTM_SUCCESS; |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_SetEncryption(const RawAddress& bd_addr, |
| tBT_TRANSPORT transport, |
| tBTM_SEC_CALLBACK* p_callback, |
| void* p_ref_data, |
| tBTM_BLE_SEC_ACT sec_act) { |
| // When we just bond a device, encryption is already done |
| (*p_callback)(&bd_addr, transport, p_ref_data, BTM_SUCCESS); |
| |
| // TODO(hsz): Re-encrypt the link after first bonded |
| |
| return BTM_SUCCESS; |
| } |
| |
| void bluetooth::shim::BTM_SecClearSecurityFlags(const RawAddress& bd_addr) { |
| // TODO(optedoblivion): Call RemoveBond on device address |
| } |
| |
| char* bluetooth::shim::BTM_SecReadDevName(const RawAddress& address) { |
| static char name[] = "TODO: See if this is needed"; |
| return name; |
| } |
| |
| bool bluetooth::shim::BTM_SecAddRmtNameNotifyCallback( |
| tBTM_RMT_NAME_CALLBACK* p_callback) { |
| // TODO(optedoblivion): keep track of callback |
| LOG_WARN("Unimplemented"); |
| return true; |
| } |
| |
| bool bluetooth::shim::BTM_SecDeleteRmtNameNotifyCallback( |
| tBTM_RMT_NAME_CALLBACK* p_callback) { |
| // TODO(optedoblivion): stop keeping track of callback |
| LOG_WARN("Unimplemented"); |
| return true; |
| } |
| |
| void bluetooth::shim::BTM_PINCodeReply(const RawAddress& bd_addr, |
| tBTM_STATUS res, uint8_t pin_len, |
| uint8_t* p_pin) { |
| ASSERT_LOG(!bluetooth::shim::is_gd_shim_enabled(), "Unreachable code path"); |
| } |
| |
| void bluetooth::shim::BTM_RemoteOobDataReply(tBTM_STATUS res, |
| const RawAddress& bd_addr, |
| const Octet16& c, |
| const Octet16& r) { |
| ASSERT_LOG(!bluetooth::shim::is_gd_shim_enabled(), "Unreachable code path"); |
| } |
| |
| tBTM_STATUS bluetooth::shim::BTM_SetDeviceClass(DEV_CLASS dev_class) { |
| // TODO(optedoblivion): see if we need this, I don't think we do |
| LOG_WARN("Unimplemented"); |
| return BTM_SUCCESS; |
| } |
