| /****************************************************************************** |
| * |
| * Copyright 2009-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| #ifndef BTIF_STORAGE_H |
| #define BTIF_STORAGE_H |
| |
| #include <bluetooth/uuid.h> |
| #include <hardware/bluetooth.h> |
| |
| #include "bt_target.h" |
| #include "stack/include/bt_device_type.h" |
| #include "stack/include/bt_octets.h" |
| #include "types/ble_address_with_type.h" |
| #include "types/raw_address.h" |
| |
| /******************************************************************************* |
| * Constants & Macros |
| ******************************************************************************/ |
| #define BTIF_STORAGE_FILL_PROPERTY(p_prop, t, l, p_v) \ |
| do { \ |
| (p_prop)->type = (t); \ |
| (p_prop)->len = (l); \ |
| (p_prop)->val = (p_v); \ |
| } while (0) |
| |
| /******************************************************************************* |
| * Functions |
| ******************************************************************************/ |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_get_adapter_property |
| * |
| * Description BTIF storage API - Fetches the adapter property->type |
| * from NVRAM and fills property->val. |
| * Caller should provide memory for property->val and |
| * set the property->val |
| * |
| * Returns BT_STATUS_SUCCESS if the fetch was successful, |
| * BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_get_adapter_property(bt_property_t* property); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_set_adapter_property |
| * |
| * Description BTIF storage API - Stores the adapter property |
| * to NVRAM |
| * |
| * Returns BT_STATUS_SUCCESS if the store was successful, |
| * BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_set_adapter_property(bt_property_t* property); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_get_remote_device_property |
| * |
| * Description BTIF storage API - Fetches the remote device property->type |
| * from NVRAM and fills property->val. |
| * Caller should provide memory for property->val and |
| * set the property->val |
| * |
| * Returns BT_STATUS_SUCCESS if the fetch was successful, |
| * BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_get_remote_device_property( |
| const RawAddress* remote_bd_addr, bt_property_t* property); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_set_remote_device_property |
| * |
| * Description BTIF storage API - Stores the remote device property |
| * to NVRAM |
| * |
| * Returns BT_STATUS_SUCCESS if the store was successful, |
| * BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_set_remote_device_property( |
| const RawAddress* remote_bd_addr, bt_property_t* property); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_get_io_caps |
| * |
| * Description BTIF storage API - Fetches the local Input/Output |
| * capabilities of the device. |
| * |
| * Returns Returns local IO Capability of device. If not stored, |
| * returns BTM_LOCAL_IO_CAPS. |
| * |
| ******************************************************************************/ |
| uint8_t btif_storage_get_local_io_caps(); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_get_io_caps_ble |
| * |
| * Description BTIF storage API - Fetches the local Input/Output |
| * capabilities of the BLE device. |
| * |
| * Returns Returns local IO Capability of BLE device. If not stored, |
| * returns BTM_LOCAL_IO_CAPS_BLE. |
| * |
| ******************************************************************************/ |
| uint8_t btif_storage_get_local_io_caps_ble(); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_add_remote_device |
| * |
| * Description BTIF storage API - Adds a newly discovered device to |
| * track along with the timestamp. Also, stores the various |
| * properties - RSSI, BDADDR, NAME (if found in EIR) |
| * |
| * Returns BT_STATUS_SUCCESS if successful, |
| * BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_add_remote_device(const RawAddress* remote_bd_addr, |
| uint32_t num_properties, |
| bt_property_t* properties); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_add_bonded_device |
| * |
| * Description BTIF storage API - Adds the newly bonded device to NVRAM |
| * along with the link-key, Key type and Pin key length |
| * |
| * Returns BT_STATUS_SUCCESS if the store was successful, |
| * BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_add_bonded_device(RawAddress* remote_bd_addr, |
| LinkKey link_key, uint8_t key_type, |
| uint8_t pin_length); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_remove_bonded_device |
| * |
| * Description BTIF storage API - Deletes the bonded device from NVRAM |
| * |
| * Returns BT_STATUS_SUCCESS if the deletion was successful, |
| * BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_remove_bonded_device(const RawAddress* remote_bd_addr); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_remove_bonded_device |
| * |
| * Description BTIF storage API - Deletes the bonded device from NVRAM |
| * |
| * Returns BT_STATUS_SUCCESS if the deletion was successful, |
| * BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_load_bonded_devices(void); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_add_hid_device_info |
| * |
| * Description BTIF storage API - Adds the hid information of bonded hid |
| * devices-to NVRAM |
| * |
| * Returns BT_STATUS_SUCCESS if the store was successful, |
| * BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| |
| bt_status_t btif_storage_add_hid_device_info( |
| RawAddress* remote_bd_addr, uint16_t attr_mask, uint8_t sub_class, |
| uint8_t app_id, uint16_t vendor_id, uint16_t product_id, uint16_t version, |
| uint8_t ctry_code, uint16_t ssr_max_latency, uint16_t ssr_min_tout, |
| uint16_t dl_len, uint8_t* dsc_list); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_load_bonded_hid_info |
| * |
| * Description BTIF storage API - Loads hid info for all the bonded devices |
| * from NVRAM and adds those devices to the BTA_HH. |
| * |
| * Returns BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_load_bonded_hid_info(void); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_remove_hid_info |
| * |
| * Description BTIF storage API - Deletes the bonded hid device info from |
| * NVRAM |
| * |
| * Returns BT_STATUS_SUCCESS if the deletion was successful, |
| * BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_remove_hid_info(const RawAddress& remote_bd_addr); |
| |
| /** Loads information about bonded hearing aid devices */ |
| void btif_storage_load_bonded_hearing_aids(); |
| |
| /** Deletes the bonded hearing aid device info from NVRAM */ |
| void btif_storage_remove_hearing_aid(const RawAddress& address); |
| |
| /** Set/Unset the hearing aid device HEARING_AID_IS_ACCEPTLISTED flag. */ |
| void btif_storage_set_hearing_aid_acceptlist(const RawAddress& address, |
| bool add_to_acceptlist); |
| |
| /** Stores information about GATT Client supported features support */ |
| void btif_storage_set_gatt_cl_supp_feat(const RawAddress& bd_addr, |
| uint8_t feat); |
| |
| /** Get client supported features */ |
| uint8_t btif_storage_get_gatt_cl_supp_feat(const RawAddress& bd_addr); |
| |
| /** Remove client supported features */ |
| void btif_storage_remove_gatt_cl_supp_feat(const RawAddress& bd_addr); |
| |
| /** Stores information about GATT server supported features */ |
| void btif_storage_set_gatt_sr_supp_feat(const RawAddress& addr, uint8_t feat); |
| |
| /** Gets information about GATT server supported features */ |
| uint8_t btif_storage_get_sr_supp_feat(const RawAddress& bd_addr); |
| |
| /** Store last server database hash for remote client */ |
| void btif_storage_set_gatt_cl_db_hash(const RawAddress& bd_addr, Octet16 hash); |
| |
| /** Get last server database hash for remote client */ |
| Octet16 btif_storage_get_gatt_cl_db_hash(const RawAddress& bd_addr); |
| |
| /** Remove last server database hash for remote client */ |
| void btif_storage_remove_gatt_cl_db_hash(const RawAddress& bd_addr); |
| |
| /** Get the hearing aid device properties. */ |
| bool btif_storage_get_hearing_aid_prop( |
| const RawAddress& address, uint8_t* capabilities, uint64_t* hi_sync_id, |
| uint16_t* render_delay, uint16_t* preparation_delay, uint16_t* codecs); |
| |
| /** Store Le Audio device autoconnect flag */ |
| void btif_storage_set_leaudio_autoconnect(const RawAddress& addr, |
| bool autoconnect); |
| |
| /** Remove Le Audio device from the storage */ |
| void btif_storage_remove_leaudio(const RawAddress& address); |
| |
| /** Load bonded Le Audio devices */ |
| void btif_storage_load_bonded_leaudio(void); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_is_retricted_device |
| * |
| * Description BTIF storage API - checks if this device is a restricted |
| * device |
| * |
| * Returns true if the device is labled as restricted |
| * false otherwise |
| * |
| ******************************************************************************/ |
| bool btif_storage_is_restricted_device(const RawAddress* remote_bd_addr); |
| |
| int btif_storage_get_num_bonded_devices(void); |
| |
| bt_status_t btif_storage_add_ble_bonding_key(RawAddress* remote_bd_addr, |
| const uint8_t* key, |
| uint8_t key_type, |
| uint8_t key_length); |
| bt_status_t btif_storage_get_ble_bonding_key(const RawAddress& remote_bd_addr, |
| uint8_t key_type, |
| uint8_t* key_value, |
| int key_length); |
| |
| bt_status_t btif_storage_add_ble_local_key(const Octet16& key, |
| uint8_t key_type); |
| bt_status_t btif_storage_remove_ble_bonding_keys( |
| const RawAddress* remote_bd_addr); |
| bt_status_t btif_storage_remove_ble_local_keys(void); |
| bt_status_t btif_storage_get_ble_local_key(uint8_t key_type, |
| Octet16* key_value); |
| |
| bt_status_t btif_storage_get_remote_addr_type(const RawAddress* remote_bd_addr, |
| tBLE_ADDR_TYPE* addr_type); |
| |
| bt_status_t btif_storage_set_remote_addr_type(const RawAddress* remote_bd_addr, |
| tBLE_ADDR_TYPE addr_type); |
| |
| bool btif_storage_get_remote_addr_type(const RawAddress& remote_bd_addr, |
| tBLE_ADDR_TYPE& addr_type); |
| void btif_storage_set_remote_addr_type(const RawAddress& remote_bd_addr, |
| const tBLE_ADDR_TYPE& addr_type); |
| bool btif_storage_get_remote_device_type(const RawAddress& remote_bd_addr, |
| tBT_DEVICE_TYPE& device_type); |
| void btif_storage_set_remote_device_type(const RawAddress& remote_bd_addr, |
| const tBT_DEVICE_TYPE& device_type); |
| |
| void btif_storage_add_groups(const RawAddress& addr); |
| void btif_storage_load_bonded_groups(void); |
| void btif_storage_remove_groups(const RawAddress& address); |
| |
| void btif_storage_set_csis_autoconnect(const RawAddress& addr, |
| bool autoconnect); |
| void btif_storage_update_csis_info(const RawAddress& addr); |
| void btif_storage_load_bonded_csis_devices(); |
| void btif_storage_remove_csis_device(const RawAddress& address); |
| |
| /******************************************************************************* |
| * Function btif_storage_load_hidd |
| * |
| * Description Loads hidd bonded device and "plugs" it into hidd |
| * |
| * Returns BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise |
| * |
| ******************************************************************************/ |
| bt_status_t btif_storage_load_hidd(void); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_set_hidd |
| * |
| * Description Stores hidd bonded device info in nvram. |
| * |
| * Returns BT_STATUS_SUCCESS |
| * |
| ******************************************************************************/ |
| |
| bt_status_t btif_storage_set_hidd(const RawAddress& remote_bd_addr); |
| |
| /******************************************************************************* |
| * |
| * Function btif_storage_remove_hidd |
| * |
| * Description Removes hidd bonded device info from nvram |
| * |
| * Returns BT_STATUS_SUCCESS |
| * |
| ******************************************************************************/ |
| |
| bt_status_t btif_storage_remove_hidd(RawAddress* remote_bd_addr); |
| |
| // Gets the device name for a given Bluetooth address |bd_addr|. |
| // The device name (if found) is stored in |name|. |
| // Returns true if the device name is found, othervise false. |
| // Note: |name| should point to a buffer that can store string of length |
| // |BTM_MAX_REM_BD_NAME_LEN|. |
| bool btif_storage_get_stored_remote_name(const RawAddress& bd_addr, char* name); |
| |
| /****************************************************************************** |
| * Exported for unit tests |
| *****************************************************************************/ |
| size_t btif_split_uuids_string(const char* str, bluetooth::Uuid* p_uuid, |
| size_t max_uuids); |
| |
| #endif /* BTIF_STORAGE_H */ |
