/******************************************************************************
 *
 *  Copyright 1999-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

#ifndef BTM_BLE_API_TYPES_H
#define BTM_BLE_API_TYPES_H

#include <base/callback_forward.h>
#include <hardware/bt_common_types.h>

#include <cstdint>
#include <vector>

#include "stack/include/bt_octets.h"
#include "stack/include/btm_api_types.h"
#include "stack/include/btm_status.h"
#include "stack/include/hci_error_code.h"
#include "types/ble_address_with_type.h"
#include "types/raw_address.h"

#define CHNL_MAP_LEN 5
typedef uint8_t tBTM_BLE_CHNL_MAP[CHNL_MAP_LEN];

enum : uint8_t {
  /* 0x00-0x04 only used for set advertising parameter command */
  BTM_BLE_CONNECT_EVT = 0x00,
  /* Connectable directed advertising */
  BTM_BLE_CONNECT_DIR_EVT = 0x01,
  /* Scannable undirected advertising */
  BTM_BLE_DISCOVER_EVT = 0x02,
  /* Non connectable undirected advertising */
  BTM_BLE_NON_CONNECT_EVT = 0x03,
  /* Connectable low duty cycle directed advertising  */
  BTM_BLE_CONNECT_LO_DUTY_DIR_EVT = 0x04,
};

/* 0x00 - 0x04 can be received on adv event type */
typedef enum : uint8_t {
  BTM_BLE_ADV_IND_EVT = 0x00,
  BTM_BLE_ADV_DIRECT_IND_EVT = 0x01,
  BTM_BLE_ADV_SCAN_IND_EVT = 0x02,
  BTM_BLE_ADV_NONCONN_IND_EVT = 0x03,
  BTM_BLE_SCAN_RSP_EVT = 0x04,
} tBTM_BLE_EVT;

typedef uint32_t tBTM_BLE_REF_VALUE;

#define BTM_BLE_SCAN_MODE_PASS 0
#define BTM_BLE_SCAN_MODE_ACTI 1
#define BTM_BLE_SCAN_MODE_NONE 0xff
typedef uint8_t tBLE_SCAN_MODE;

#define BTM_BLE_BATCH_SCAN_MODE_DISABLE 0
#define BTM_BLE_BATCH_SCAN_MODE_PASS 1
#define BTM_BLE_BATCH_SCAN_MODE_ACTI 2
#define BTM_BLE_BATCH_SCAN_MODE_PASS_ACTI 3

typedef uint8_t tBTM_BLE_BATCH_SCAN_MODE;

/* advertising channel map */
#define BTM_BLE_ADV_CHNL_37 (0x01 << 0)
#define BTM_BLE_ADV_CHNL_38 (0x01 << 1)
#define BTM_BLE_ADV_CHNL_39 (0x01 << 2)
typedef uint8_t tBTM_BLE_ADV_CHNL_MAP;

/*d efault advertising channel map */
#ifndef BTM_BLE_DEFAULT_ADV_CHNL_MAP
#define BTM_BLE_DEFAULT_ADV_CHNL_MAP \
  (BTM_BLE_ADV_CHNL_37 | BTM_BLE_ADV_CHNL_38 | BTM_BLE_ADV_CHNL_39)
#endif

/* advertising filter policy */
#define AP_SCAN_CONN_ALL 0x00 /* default */
#define AP_SCAN_WL_CONN_ALL 0x01
#define AP_SCAN_ALL_CONN_WL 0x02
#define AP_SCAN_CONN_WL 0x03
#define AP_SCAN_CONN_POLICY_MAX 0x04
typedef uint8_t tBTM_BLE_AFP;

/* default advertising filter policy */
#ifndef BTM_BLE_DEFAULT_AFP
#define BTM_BLE_DEFAULT_AFP AP_SCAN_CONN_ALL
#endif

/* scanning filter policy */
/* 0: accept adv packet from all, directed adv pkt not directed */
/*    to local device is ignored */
#define SP_ADV_ALL 0x00

typedef uint8_t tBTM_BLE_SFP;

#ifndef BTM_BLE_DEFAULT_SFP
#define BTM_BLE_DEFAULT_SFP SP_ADV_ALL
#endif

/* Full scan boundary values */
#define BTM_BLE_ADV_SCAN_FULL_MIN 0x00
#define BTM_BLE_ADV_SCAN_FULL_MAX 0x64

/* Partial scan boundary values */
#define BTM_BLE_ADV_SCAN_TRUNC_MAX BTM_BLE_ADV_SCAN_FULL_MAX

/* Threshold values */
#define BTM_BLE_ADV_SCAN_THR_MAX BTM_BLE_ADV_SCAN_FULL_MAX

/* connection parameter boundary values */
#define BTM_BLE_SCAN_INT_MIN 0x0004
#define BTM_BLE_SCAN_INT_MAX 0x4000
#define BTM_BLE_SCAN_WIN_MIN 0x0004
#define BTM_BLE_SCAN_WIN_MAX 0x4000
#define BTM_BLE_EXT_SCAN_INT_MAX 0x00FFFFFF
#define BTM_BLE_EXT_SCAN_WIN_MAX 0xFFFF
#define BTM_BLE_CONN_INT_MIN 0x0006
#define BTM_BLE_CONN_INT_MAX 0x0C80
#define BTM_BLE_CONN_LATENCY_MAX 500
#define BTM_BLE_CONN_SUP_TOUT_MIN 0x000A
#define BTM_BLE_CONN_SUP_TOUT_MAX 0x0C80
/* use this value when a specific value not to be overwritten */
#define BTM_BLE_CONN_PARAM_UNDEF 0xffff
#define BTM_BLE_SCAN_PARAM_UNDEF 0xffff

/* default connection parameters if not configured, use GAP recommended value
 * for auto/selective connection */
/* default scan interval */
#ifndef BTM_BLE_SCAN_FAST_INT
#define BTM_BLE_SCAN_FAST_INT 96 /* 30 ~ 60 ms (use 60)  = 96 *0.625 */
#endif
/* default scan window for background connection, applicable for auto connection
 * or selective connection */
#ifndef BTM_BLE_SCAN_FAST_WIN
#define BTM_BLE_SCAN_FAST_WIN 48 /* 30 ms = 48 *0.625 */
#endif

/* default scan paramter used in reduced power cycle (background scanning) */
#ifndef BTM_BLE_SCAN_SLOW_INT_1
#define BTM_BLE_SCAN_SLOW_INT_1 2048 /* 1.28 s   = 2048 *0.625 */
#endif
#ifndef BTM_BLE_SCAN_SLOW_WIN_1
#define BTM_BLE_SCAN_SLOW_WIN_1 48 /* 30 ms = 48 *0.625 */
#endif

/* default scan paramter used in reduced power cycle (background scanning) */
#ifndef BTM_BLE_SCAN_SLOW_INT_2
#define BTM_BLE_SCAN_SLOW_INT_2 4096 /* 2.56 s   = 4096 *0.625 */
#endif
#ifndef BTM_BLE_SCAN_SLOW_WIN_2
#define BTM_BLE_SCAN_SLOW_WIN_2 36 /* 22.5 ms = 36 *0.625 */
#endif

/* default connection interval min */
#ifndef BTM_BLE_CONN_INT_MIN_DEF
/* recommended min: 30ms  = 24 * 1.25 */
#ifndef BTM_BLE_CONN_INT_MIN_DEF
#define BTM_BLE_CONN_INT_MIN_DEF 24
#endif
#endif

/* default connectino interval max */
#ifndef BTM_BLE_CONN_INT_MAX_DEF
/* recommended max: 50 ms = 56 * 1.25 */
#ifndef BTM_BLE_CONN_INT_MAX_DEF
#define BTM_BLE_CONN_INT_MAX_DEF 40
#endif
#endif

/* default peripheral latency */
#ifndef BTM_BLE_CONN_PERIPHERAL_LATENCY_DEF
#define BTM_BLE_CONN_PERIPHERAL_LATENCY_DEF 0 /* 0 */
#endif

/* default supervision timeout */
#ifndef BTM_BLE_CONN_TIMEOUT_DEF
#define BTM_BLE_CONN_TIMEOUT_DEF 500
#endif

/* minimum supervision timeout */
#ifndef BTM_BLE_CONN_TIMEOUT_MIN_DEF
#define BTM_BLE_CONN_TIMEOUT_MIN_DEF 100
#endif

/* minimum acceptable connection interval */
#ifndef BTM_BLE_CONN_INT_MIN_LIMIT
#define BTM_BLE_CONN_INT_MIN_LIMIT 0x0009
#endif

/* minimum acceptable connection interval when there is bonded Hearing Aid
 * device */
#ifndef BTM_BLE_CONN_INT_MIN_HEARINGAID
#define BTM_BLE_CONN_INT_MIN_HEARINGAID 0x0010
#endif

#define BTM_CMAC_TLEN_SIZE 8 /* 64 bits */
#define BTM_BLE_AUTH_SIGN_LEN \
  12 /* BLE data signature length 8 Bytes + 4 bytes counter*/
typedef uint8_t BLE_SIGNATURE[BTM_BLE_AUTH_SIGN_LEN]; /* Device address */

#ifndef BTM_BLE_HOST_SUPPORT
#define BTM_BLE_HOST_SUPPORT 0x01
#endif

#ifndef BTM_BLE_SIMULTANEOUS_HOST
#define BTM_BLE_SIMULTANEOUS_HOST 0x01
#endif

/* Appearance Values Reported with BTM_BLE_AD_TYPE_APPEARANCE */
#define BTM_BLE_APPEARANCE_UKNOWN 0x0000
#define BTM_BLE_APPEARANCE_GENERIC_PHONE 0x0040
#define BTM_BLE_APPEARANCE_GENERIC_COMPUTER 0x0080
#define BTM_BLE_APPEARANCE_GENERIC_WATCH 0x00C0
#define BTM_BLE_APPEARANCE_SPORTS_WATCH 0x00C1
#define BTM_BLE_APPEARANCE_GENERIC_CLOCK 0x0100
#define BTM_BLE_APPEARANCE_GENERIC_DISPLAY 0x0140
#define BTM_BLE_APPEARANCE_GENERIC_REMOTE 0x0180
#define BTM_BLE_APPEARANCE_GENERIC_EYEGLASSES 0x01C0
#define BTM_BLE_APPEARANCE_GENERIC_TAG 0x0200
#define BTM_BLE_APPEARANCE_GENERIC_KEYRING 0x0240
#define BTM_BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 0x0280
#define BTM_BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 0x02C0
#define BTM_BLE_APPEARANCE_GENERIC_THERMOMETER 0x0300
#define BTM_BLE_APPEARANCE_THERMOMETER_EAR 0x0301
#define BTM_BLE_APPEARANCE_GENERIC_HEART_RATE 0x0340
#define BTM_BLE_APPEARANCE_HEART_RATE_BELT 0x0341
#define BTM_BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 0x0380
#define BTM_BLE_APPEARANCE_BLOOD_PRESSURE_ARM 0x0381
#define BTM_BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 0x0382
#define BTM_BLE_APPEARANCE_GENERIC_HID 0x03C0
#define BTM_BLE_APPEARANCE_HID_KEYBOARD 0x03C1
#define BTM_BLE_APPEARANCE_HID_MOUSE 0x03C2
#define BTM_BLE_APPEARANCE_HID_JOYSTICK 0x03C3
#define BTM_BLE_APPEARANCE_HID_GAMEPAD 0x03C4
#define BTM_BLE_APPEARANCE_HID_DIGITIZER_TABLET 0x03C5
#define BTM_BLE_APPEARANCE_HID_CARD_READER 0x03C6
#define BTM_BLE_APPEARANCE_HID_DIGITAL_PEN 0x03C7
#define BTM_BLE_APPEARANCE_HID_BARCODE_SCANNER 0x03C8
#define BTM_BLE_APPEARANCE_GENERIC_GLUCOSE 0x0400
#define BTM_BLE_APPEARANCE_GENERIC_WALKING 0x0440
#define BTM_BLE_APPEARANCE_WALKING_IN_SHOE 0x0441
#define BTM_BLE_APPEARANCE_WALKING_ON_SHOE 0x0442
#define BTM_BLE_APPEARANCE_WALKING_ON_HIP 0x0443
#define BTM_BLE_APPEARANCE_GENERIC_CYCLING 0x0480
#define BTM_BLE_APPEARANCE_CYCLING_COMPUTER 0x0481
#define BTM_BLE_APPEARANCE_CYCLING_SPEED 0x0482
#define BTM_BLE_APPEARANCE_CYCLING_CADENCE 0x0483
#define BTM_BLE_APPEARANCE_CYCLING_POWER 0x0484
#define BTM_BLE_APPEARANCE_CYCLING_SPEED_CADENCE 0x0485
#define BTM_BLE_APPEARANCE_WEARABLE_AUDIO_DEVICE_EARBUD 0x0941
#define BTM_BLE_APPEARANCE_GENERIC_PULSE_OXIMETER 0x0C40
#define BTM_BLE_APPEARANCE_PULSE_OXIMETER_FINGERTIP 0x0C41
#define BTM_BLE_APPEARANCE_PULSE_OXIMETER_WRIST 0x0C42
#define BTM_BLE_APPEARANCE_GENERIC_WEIGHT 0x0C80
#define BTM_BLE_APPEARANCE_GENERIC_OUTDOOR_SPORTS 0x1440
#define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION 0x1441
#define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_AND_NAV 0x1442
#define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_POD 0x1443
#define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_POD_AND_NAV 0x1444

/* Structure returned with Rand/Encrypt complete callback */
typedef struct {
  uint8_t status;
  uint8_t param_len;
  uint16_t opcode;
  uint8_t param_buf[OCTET16_LEN];
} tBTM_RAND_ENC;

/* General callback function for notifying an application that a synchronous
 * BTM function is complete. The pointer contains the address of any returned
 * data.
*/
typedef void(tBTM_RAND_ENC_CB)(tBTM_RAND_ENC* p1);

/* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */
#define BTM_BLE_LIMIT_DISC_FLAG (0x01 << 0)
#define BTM_BLE_GEN_DISC_FLAG (0x01 << 1)
#define BTM_BLE_BREDR_NOT_SPT (0x01 << 2)
/* 4.1 spec adv flag for simultaneous BR/EDR+LE connection support */
#define BTM_BLE_DMT_CONTROLLER_SPT (0x01 << 3)
#define BTM_BLE_DMT_HOST_SPT (0x01 << 4)

// TODO(jpawlowski): this should be removed with code that depend on it.
#define BTM_BLE_AD_BIT_FLAGS (0x00000001 << 1)

#define BTM_BLE_AD_TYPE_FLAG HCI_EIR_FLAGS_TYPE /* 0x01 */
#define BTM_BLE_AD_TYPE_16SRV_CMPL          \
  HCI_EIR_COMPLETE_16BITS_UUID_TYPE /* 0x03 \
                                       */
#define BTM_BLE_AD_TYPE_APPEARANCE 0x19
#define BTM_BLE_AD_TYPE_RSI HCI_EIR_RSI_TYPE /* 0x2E */

/*  Min/max Preferred  number of payload octets that the local Controller
    should include in a single Link Layer Data Channel PDU. */
#define BTM_BLE_DATA_SIZE_MAX 0x00fb
#define BTM_BLE_DATA_SIZE_MIN 0x001b

/*  Preferred maximum number of microseconds that the local Controller
    should use to transmit a single Link Layer Data Channel PDU. */
#define BTM_BLE_DATA_TX_TIME_MAX_LEGACY  0x0848
#define BTM_BLE_DATA_TX_TIME_MAX         0x4290

/* adv tx power in dBm */
typedef struct {
  uint8_t adv_inst_max; /* max adv instance supported in controller */
  uint8_t rpa_offloading;
  uint16_t tot_scan_results_strg;
  uint8_t max_irk_list_sz;
  uint8_t filter_support;
  uint8_t max_filter;
  uint8_t energy_support;
  bool values_read;
  uint16_t version_supported;
  uint16_t total_trackable_advertisers;
  uint8_t extended_scan_support;
  uint8_t debug_logging_supported;
  uint8_t le_address_generation_offloading_support;
  uint32_t a2dp_source_offload_capability_mask;
  uint8_t quality_report_support;
  uint32_t dynamic_audio_buffer_support;
} tBTM_BLE_VSC_CB;

/* Stored the default/maximum/minimum buffer time for dynamic audio buffer.
 * For A2DP offload usage, the unit is millisecond.
 * For A2DP legacy usage, the unit is buffer queue size*/
typedef struct {
  uint16_t default_buffer_time;
  uint16_t maximum_buffer_time;
  uint16_t minimum_buffer_time;
} tBTM_BT_DYNAMIC_AUDIO_BUFFER_CB;

typedef void(tBTM_BLE_ADV_DATA_CMPL_CBACK)(tBTM_STATUS status);

#ifndef BTM_BLE_MULTI_ADV_MAX
#define BTM_BLE_MULTI_ADV_MAX                           \
  16 /* controller returned adv_inst_max should be less \
        than this number */
#endif

typedef uint8_t tGATT_IF;

typedef void(tBTM_BLE_SCAN_THRESHOLD_CBACK)(tBTM_BLE_REF_VALUE ref_value);
using tBTM_BLE_SCAN_REP_CBACK =
    base::Callback<void(tBTM_STATUS /* status */, uint8_t /* report_format */,
                        uint8_t /* num_reports */, std::vector<uint8_t>)>;

#ifndef BTM_BLE_BATCH_SCAN_MAX
#define BTM_BLE_BATCH_SCAN_MAX 5
#endif

#ifndef BTM_BLE_BATCH_REP_MAIN_Q_SIZE
#define BTM_BLE_BATCH_REP_MAIN_Q_SIZE 2
#endif

typedef enum {
  BTM_BLE_SCAN_INVALID_STATE = 0,
  BTM_BLE_SCAN_ENABLE_CALLED = 1,
  BTM_BLE_SCAN_ENABLED_STATE = 2,
  BTM_BLE_SCAN_DISABLE_CALLED = 3,
  BTM_BLE_SCAN_DISABLED_STATE = 4
} tBTM_BLE_BATCH_SCAN_STATE;

enum { BTM_BLE_DISCARD_OLD_ITEMS, BTM_BLE_DISCARD_LOWER_RSSI_ITEMS };
typedef uint8_t tBTM_BLE_DISCARD_RULE;

typedef struct {
  tBTM_BLE_BATCH_SCAN_STATE cur_state;
  tBTM_BLE_BATCH_SCAN_MODE scan_mode;
  uint32_t scan_interval;
  uint32_t scan_window;
  tBLE_ADDR_TYPE addr_type;
  tBTM_BLE_DISCARD_RULE discard_rule;
  tBTM_BLE_SCAN_THRESHOLD_CBACK* p_thres_cback;
  tBTM_BLE_REF_VALUE ref_value;
} tBTM_BLE_BATCH_SCAN_CB;

/* filter selection bit index  */
#define BTM_BLE_PF_ADDR_FILTER 0
#define BTM_BLE_PF_SRVC_DATA 1
#define BTM_BLE_PF_SRVC_UUID 2
#define BTM_BLE_PF_SRVC_SOL_UUID 3
#define BTM_BLE_PF_LOCAL_NAME 4
#define BTM_BLE_PF_MANU_DATA 5
#define BTM_BLE_PF_SRVC_DATA_PATTERN 6
/* when passed in payload filter type all, only clear action is applicable */
#define BTM_BLE_PF_TYPE_ALL 7
#define BTM_BLE_PF_TYPE_MAX 8

/* max number of filter spot for different filter type */
#ifndef BTM_BLE_MAX_UUID_FILTER
#define BTM_BLE_MAX_UUID_FILTER 8
#endif
#ifndef BTM_BLE_MAX_ADDR_FILTER
#define BTM_BLE_MAX_ADDR_FILTER 8
#endif
#ifndef BTM_BLE_PF_STR_COND_MAX
#define BTM_BLE_PF_STR_COND_MAX 4 /* apply to manu data , or local name */
#endif
#ifndef BTM_BLE_PF_STR_LEN_MAX
#define BTM_BLE_PF_STR_LEN_MAX 29 /* match for first 29 bytes */
#endif

typedef uint8_t tBTM_BLE_PF_COND_TYPE;

#define BTM_BLE_PF_LOGIC_OR 0
#define BTM_BLE_PF_LOGIC_AND 1
typedef uint8_t tBTM_BLE_PF_LOGIC_TYPE;

#define BTM_BLE_PF_ENABLE 1
#define BTM_BLE_PF_CONFIG 2

typedef uint8_t tBTM_BLE_PF_FILT_INDEX;

enum {
  BTM_BLE_SCAN_COND_ADD,
  BTM_BLE_SCAN_COND_DELETE,
  BTM_BLE_SCAN_COND_CLEAR = 2
};
typedef uint8_t tBTM_BLE_SCAN_COND_OP;

/* BLE adv payload filtering config complete callback */
using tBTM_BLE_PF_CFG_CBACK = base::Callback<void(
    uint8_t /* avbl_space */, tBTM_BLE_SCAN_COND_OP /* action */,
    tBTM_STATUS /* btm_status */)>;

/* BLE adv payload filtering status setup complete callback */
using tBTM_BLE_PF_STATUS_CBACK = base::Callback<void(
    tBTM_BLE_SCAN_COND_OP /*action*/, tBTM_STATUS /* btm_status */)>;

/* BLE adv payload filtering param setup complete callback */
using tBTM_BLE_PF_PARAM_CB = base::Callback<void(
    uint8_t /* avbl_space */, tBTM_BLE_SCAN_COND_OP /* action */,
    tBTM_STATUS /* btm_status */)>;

#ifndef BTM_CS_IRK_LIST_MAX
#define BTM_CS_IRK_LIST_MAX 0x20
#endif

typedef struct {
  bool in_use;
  RawAddress bd_addr;
  uint8_t pf_counter[BTM_BLE_PF_TYPE_MAX]; /* number of filter indexed by
                                              tBTM_BLE_PF_COND_TYPE */
} tBTM_BLE_PF_COUNT;

typedef struct {
  bool enable;
  uint8_t op_type;
  tBTM_BLE_PF_COUNT* p_addr_filter_count; /* per BDA filter array */
  tBLE_BD_ADDR cur_filter_target;
} tBTM_BLE_ADV_FILTER_CB;

/* Sub codes */
#define BTM_BLE_META_PF_ENABLE 0x00
#define BTM_BLE_META_PF_FEAT_SEL 0x01
#define BTM_BLE_META_PF_ADDR 0x02
#define BTM_BLE_META_PF_UUID 0x03
#define BTM_BLE_META_PF_SOL_UUID 0x04
#define BTM_BLE_META_PF_LOCAL_NAME 0x05
#define BTM_BLE_META_PF_MANU_DATA 0x06
#define BTM_BLE_META_PF_SRVC_DATA 0x07
#define BTM_BLE_META_PF_ALL 0x08

#define ADV_INFO_PRESENT 0x00
#define NO_ADV_INFO_PRESENT 0x01

typedef btgatt_track_adv_info_t tBTM_BLE_TRACK_ADV_DATA;

typedef void(tBTM_BLE_TRACK_ADV_CBACK)(
    tBTM_BLE_TRACK_ADV_DATA* p_track_adv_data);

typedef struct {
  tBTM_BLE_REF_VALUE ref_value;
  tBTM_BLE_TRACK_ADV_CBACK* p_track_cback;
} tBTM_BLE_ADV_TRACK_CB;

typedef uint32_t tBTM_BLE_TX_TIME_MS;
typedef uint32_t tBTM_BLE_RX_TIME_MS;
typedef uint32_t tBTM_BLE_IDLE_TIME_MS;
typedef uint32_t tBTM_BLE_ENERGY_USED;

typedef void(tBTM_BLE_ENERGY_INFO_CBACK)(tBTM_BLE_TX_TIME_MS tx_time,
                                         tBTM_BLE_RX_TIME_MS rx_time,
                                         tBTM_BLE_IDLE_TIME_MS idle_time,
                                         tBTM_BLE_ENERGY_USED energy_used,
                                         tHCI_STATUS status);

typedef struct {
  tBTM_BLE_ENERGY_INFO_CBACK* p_ener_cback;
} tBTM_BLE_ENERGY_INFO_CB;

typedef void(tBTM_BLE_CTRL_FEATURES_CBACK)(tHCI_STATUS status);

/* BLE encryption keys */
typedef struct {
  Octet16 ltk;
  BT_OCTET8 rand;
  uint16_t ediv;
  uint8_t sec_level;
  uint8_t key_size;
} tBTM_LE_PENC_KEYS;

/* BLE CSRK keys */
typedef struct {
  uint32_t counter;
  Octet16 csrk;
  uint8_t sec_level;
} tBTM_LE_PCSRK_KEYS;

/* BLE Encryption reproduction keys */
typedef struct {
  Octet16 ltk;
  uint16_t div;
  uint8_t key_size;
  uint8_t sec_level;
} tBTM_LE_LENC_KEYS;

/* BLE SRK keys */
typedef struct {
  uint32_t counter;
  uint16_t div;
  uint8_t sec_level;
  Octet16 csrk;
} tBTM_LE_LCSRK_KEYS;

typedef struct {
  Octet16 irk;
  tBLE_ADDR_TYPE identity_addr_type;
  RawAddress identity_addr;
} tBTM_LE_PID_KEYS;

typedef union {
  tBTM_LE_PENC_KEYS penc_key;   /* received peer encryption key */
  tBTM_LE_PCSRK_KEYS pcsrk_key; /* received peer device SRK */
  tBTM_LE_PID_KEYS pid_key;     /* peer device ID key */
  tBTM_LE_LENC_KEYS lenc_key;   /* local encryption reproduction keys
                                 * LTK = = d1(ER,DIV,0) */
  tBTM_LE_LCSRK_KEYS lcsrk_key; /* local device CSRK = d1(ER,DIV,1)*/
} tBTM_LE_KEY_VALUE;

typedef struct {
  tBTM_LE_KEY_TYPE key_type;
  tBTM_LE_KEY_VALUE* p_key_value;
} tBTM_LE_KEY;

typedef union {
  tBTM_LE_IO_REQ io_req; /* BTM_LE_IO_REQ_EVT      */
  uint32_t key_notif;    /* BTM_LE_KEY_NOTIF_EVT   */
                         /* BTM_LE_NC_REQ_EVT */
                         /* no callback data for
                          * BTM_LE_KEY_REQ_EVT
                          * and BTM_LE_OOB_REQ_EVT  */
  tBTM_LE_COMPLT complt; /* BTM_LE_COMPLT_EVT      */
  tSMP_OOB_DATA_TYPE req_oob_type;
  tBTM_LE_KEY key;
  tSMP_LOC_OOB_DATA local_oob_data;
} tBTM_LE_EVT_DATA;

/* Simple Pairing Events.  Called by the stack when Simple Pairing related
 * events occur.
 */
typedef uint8_t(tBTM_LE_CALLBACK)(tBTM_LE_EVT event, const RawAddress& bda,
                                  tBTM_LE_EVT_DATA* p_data);

#define BTM_BLE_KEY_TYPE_ID 1
#define BTM_BLE_KEY_TYPE_ER 2
#define BTM_BLE_KEY_TYPE_COUNTER 3  // tobe obsolete

typedef struct {
  Octet16 ir;
  Octet16 irk;
  Octet16 dhk;

} tBTM_BLE_LOCAL_ID_KEYS;

typedef union {
  tBTM_BLE_LOCAL_ID_KEYS id_keys;
  Octet16 er;
} tBTM_BLE_LOCAL_KEYS;

/* New LE identity key for local device.
 */
typedef void(tBTM_LE_KEY_CALLBACK)(uint8_t key_type,
                                   tBTM_BLE_LOCAL_KEYS* p_key);

#endif  // BTM_BLE_API_TYPES_H