| /****************************************************************************** |
| * |
| * Copyright 2006-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains action functions for BTA JV APIs. |
| * |
| ******************************************************************************/ |
| #include <arpa/inet.h> |
| #include <bluetooth/uuid.h> |
| #include <hardware/bluetooth.h> |
| #include <pthread.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #include "avct_api.h" |
| #include "avdt_api.h" |
| #include "bt_common.h" |
| #include "bt_types.h" |
| #include "bta_api.h" |
| #include "bta_jv_api.h" |
| #include "bta_jv_co.h" |
| #include "bta_jv_int.h" |
| #include "bta_sys.h" |
| #include "btm_api.h" |
| #include "btm_int.h" |
| #include "device/include/controller.h" |
| #include "gap_api.h" |
| #include "l2c_api.h" |
| #include "osi/include/allocator.h" |
| #include "port_api.h" |
| #include "rfcdefs.h" |
| #include "sdp_api.h" |
| #include "stack/l2cap/l2c_int.h" |
| #include "utl.h" |
| |
| #include "osi/include/osi.h" |
| |
| using bluetooth::Uuid; |
| |
| tBTA_JV_CB bta_jv_cb; |
| |
| /* one of these exists for each client */ |
| struct fc_client { |
| struct fc_client* next_all_list; |
| struct fc_client* next_chan_list; |
| RawAddress remote_addr; |
| uint32_t id; |
| tBTA_JV_L2CAP_CBACK* p_cback; |
| uint32_t l2cap_socket_id; |
| uint16_t handle; |
| uint16_t chan; |
| uint8_t sec_id; |
| unsigned server : 1; |
| unsigned init_called : 1; |
| }; |
| |
| /* one of these exists for each channel we're dealing with */ |
| struct fc_channel { |
| struct fc_channel* next; |
| struct fc_client* clients; |
| uint8_t has_server : 1; |
| uint16_t chan; |
| }; |
| |
| static struct fc_client* fc_clients; |
| static struct fc_channel* fc_channels; |
| static uint32_t fc_next_id; |
| |
| static void fcchan_conn_chng_cbk(uint16_t chan, const RawAddress& bd_addr, |
| bool connected, uint16_t reason, |
| tBT_TRANSPORT); |
| static void fcchan_data_cbk(uint16_t chan, const RawAddress& bd_addr, |
| BT_HDR* p_buf); |
| |
| static tBTA_JV_PCB* bta_jv_add_rfc_port(tBTA_JV_RFC_CB* p_cb, |
| tBTA_JV_PCB* p_pcb_open); |
| static tBTA_JV_STATUS bta_jv_free_set_pm_profile_cb(uint32_t jv_handle); |
| static void bta_jv_pm_conn_busy(tBTA_JV_PM_CB* p_cb); |
| static void bta_jv_pm_conn_idle(tBTA_JV_PM_CB* p_cb); |
| static void bta_jv_pm_state_change(tBTA_JV_PM_CB* p_cb, |
| const tBTA_JV_CONN_STATE state); |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_alloc_sec_id |
| * |
| * Description allocate a security id |
| * |
| * Returns |
| * |
| ******************************************************************************/ |
| uint8_t bta_jv_alloc_sec_id(void) { |
| uint8_t ret = 0; |
| int i; |
| for (i = 0; i < BTA_JV_NUM_SERVICE_ID; i++) { |
| if (0 == bta_jv_cb.sec_id[i]) { |
| bta_jv_cb.sec_id[i] = BTA_JV_FIRST_SERVICE_ID + i; |
| ret = bta_jv_cb.sec_id[i]; |
| break; |
| } |
| } |
| return ret; |
| } |
| static int get_sec_id_used(void) { |
| int i; |
| int used = 0; |
| for (i = 0; i < BTA_JV_NUM_SERVICE_ID; i++) { |
| if (bta_jv_cb.sec_id[i]) used++; |
| } |
| if (used == BTA_JV_NUM_SERVICE_ID) |
| LOG(ERROR) << __func__ |
| << ": sec id exceeds the limit=" << BTA_JV_NUM_SERVICE_ID; |
| return used; |
| } |
| static int get_rfc_cb_used(void) { |
| int i; |
| int used = 0; |
| for (i = 0; i < BTA_JV_MAX_RFC_CONN; i++) { |
| if (bta_jv_cb.rfc_cb[i].handle) used++; |
| } |
| if (used == BTA_JV_MAX_RFC_CONN) |
| LOG(ERROR) << __func__ |
| << ": rfc ctrl block exceeds the limit=" << BTA_JV_MAX_RFC_CONN; |
| return used; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_free_sec_id |
| * |
| * Description free the given security id |
| * |
| * Returns |
| * |
| ******************************************************************************/ |
| static void bta_jv_free_sec_id(uint8_t* p_sec_id) { |
| uint8_t sec_id = *p_sec_id; |
| *p_sec_id = 0; |
| if (sec_id >= BTA_JV_FIRST_SERVICE_ID && sec_id <= BTA_JV_LAST_SERVICE_ID) { |
| BTM_SecClrService(sec_id); |
| bta_jv_cb.sec_id[sec_id - BTA_JV_FIRST_SERVICE_ID] = 0; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_alloc_rfc_cb |
| * |
| * Description allocate a control block for the given port handle |
| * |
| * Returns |
| * |
| ******************************************************************************/ |
| tBTA_JV_RFC_CB* bta_jv_alloc_rfc_cb(uint16_t port_handle, |
| tBTA_JV_PCB** pp_pcb) { |
| tBTA_JV_RFC_CB* p_cb = NULL; |
| tBTA_JV_PCB* p_pcb; |
| int i, j; |
| for (i = 0; i < BTA_JV_MAX_RFC_CONN; i++) { |
| if (0 == bta_jv_cb.rfc_cb[i].handle) { |
| p_cb = &bta_jv_cb.rfc_cb[i]; |
| /* mask handle to distinguish it with L2CAP handle */ |
| p_cb->handle = (i + 1) | BTA_JV_RFCOMM_MASK; |
| |
| p_cb->max_sess = 1; |
| p_cb->curr_sess = 1; |
| for (j = 0; j < BTA_JV_MAX_RFC_SR_SESSION; j++) p_cb->rfc_hdl[j] = 0; |
| p_cb->rfc_hdl[0] = port_handle; |
| VLOG(2) << __func__ << "port_handle=" << +port_handle |
| << ", handle=" << loghex(p_cb->handle); |
| |
| p_pcb = &bta_jv_cb.port_cb[port_handle - 1]; |
| p_pcb->handle = p_cb->handle; |
| p_pcb->port_handle = port_handle; |
| p_pcb->p_pm_cb = NULL; |
| *pp_pcb = p_pcb; |
| break; |
| } |
| } |
| if (p_cb == NULL) { |
| LOG(ERROR) << __func__ << "port_handle=" << port_handle |
| << " ctrl block exceeds limit:" << port_handle, |
| BTA_JV_MAX_RFC_CONN; |
| } |
| return p_cb; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_rfc_port_to_pcb |
| * |
| * Description find the port control block associated with the given port |
| * handle |
| * |
| * Returns |
| * |
| ******************************************************************************/ |
| tBTA_JV_PCB* bta_jv_rfc_port_to_pcb(uint16_t port_handle) { |
| tBTA_JV_PCB* p_pcb = NULL; |
| |
| if ((port_handle > 0) && (port_handle <= MAX_RFC_PORTS) && |
| bta_jv_cb.port_cb[port_handle - 1].handle) { |
| p_pcb = &bta_jv_cb.port_cb[port_handle - 1]; |
| } |
| |
| return p_pcb; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_rfc_port_to_cb |
| * |
| * Description find the RFCOMM control block associated with the given port |
| * handle |
| * |
| * Returns |
| * |
| ******************************************************************************/ |
| tBTA_JV_RFC_CB* bta_jv_rfc_port_to_cb(uint16_t port_handle) { |
| tBTA_JV_RFC_CB* p_cb = NULL; |
| uint32_t handle; |
| |
| if ((port_handle > 0) && (port_handle <= MAX_RFC_PORTS) && |
| bta_jv_cb.port_cb[port_handle - 1].handle) { |
| handle = bta_jv_cb.port_cb[port_handle - 1].handle; |
| handle &= BTA_JV_RFC_HDL_MASK; |
| handle &= ~BTA_JV_RFCOMM_MASK; |
| if (handle) p_cb = &bta_jv_cb.rfc_cb[handle - 1]; |
| } else { |
| LOG(WARNING) << __func__ |
| << ": jv handle not found port_handle:" << port_handle; |
| } |
| return p_cb; |
| } |
| |
| static tBTA_JV_STATUS bta_jv_free_rfc_cb(tBTA_JV_RFC_CB* p_cb, |
| tBTA_JV_PCB* p_pcb) { |
| tBTA_JV_STATUS status = BTA_JV_SUCCESS; |
| bool remove_server = false; |
| int close_pending = 0; |
| |
| if (!p_cb || !p_pcb) { |
| LOG(ERROR) << __func__ << " p_cb or p_pcb cannot be null"; |
| return BTA_JV_FAILURE; |
| } |
| VLOG(2) << __func__ << ": max_sess=" << p_cb->max_sess |
| << ", curr_sess=" << p_cb->curr_sess << ", p_pcb=" << p_pcb |
| << ", user=" << p_pcb->rfcomm_slot_id << ", state=" << p_pcb->state |
| << ", jv handle=" << loghex(p_pcb->handle); |
| |
| if (p_cb->curr_sess <= 0) return BTA_JV_SUCCESS; |
| |
| switch (p_pcb->state) { |
| case BTA_JV_ST_CL_CLOSING: |
| case BTA_JV_ST_SR_CLOSING: |
| LOG(WARNING) << __func__ |
| << ": return on closing, port state=" << p_pcb->state |
| << ", scn=" << p_cb->scn << ", p_pcb=" << p_pcb |
| << ", user_data=" << p_pcb->rfcomm_slot_id; |
| status = BTA_JV_FAILURE; |
| return status; |
| case BTA_JV_ST_CL_OPEN: |
| case BTA_JV_ST_CL_OPENING: |
| VLOG(2) << __func__ << ": state=" << p_pcb->state << ", scn=" << p_cb->scn |
| << ", user_data=" << p_pcb->rfcomm_slot_id; |
| p_pcb->state = BTA_JV_ST_CL_CLOSING; |
| break; |
| case BTA_JV_ST_SR_LISTEN: |
| p_pcb->state = BTA_JV_ST_SR_CLOSING; |
| remove_server = true; |
| VLOG(2) << __func__ << ": state: BTA_JV_ST_SR_LISTEN, scn=" << p_cb->scn |
| << ", user_data=" << p_pcb->rfcomm_slot_id; |
| break; |
| case BTA_JV_ST_SR_OPEN: |
| p_pcb->state = BTA_JV_ST_SR_CLOSING; |
| VLOG(2) << ": state: BTA_JV_ST_SR_OPEN, scn=" << p_cb->scn |
| << " user_data=" << p_pcb->rfcomm_slot_id; |
| break; |
| default: |
| LOG(WARNING) << __func__ << ":failed, ignore port state= " << p_pcb->state |
| << ", scn=" << p_cb->scn << ", p_pcb= " << p_pcb |
| << ", jv handle=" << loghex(p_pcb->handle) |
| << ", port_handle=" << p_pcb->port_handle |
| << ", user_data=" << p_pcb->rfcomm_slot_id; |
| status = BTA_JV_FAILURE; |
| break; |
| } |
| if (BTA_JV_SUCCESS == status) { |
| int port_status; |
| |
| if (!remove_server) |
| port_status = RFCOMM_RemoveConnection(p_pcb->port_handle); |
| else |
| port_status = RFCOMM_RemoveServer(p_pcb->port_handle); |
| if (port_status != PORT_SUCCESS) { |
| status = BTA_JV_FAILURE; |
| LOG(WARNING) << __func__ << ": Remove jv handle=" << loghex(p_pcb->handle) |
| << ", state=" << p_pcb->state |
| << ", port_status=" << port_status |
| << ", port_handle=" << p_pcb->port_handle |
| << ", close_pending=" << close_pending; |
| } |
| } |
| if (!close_pending) { |
| p_pcb->port_handle = 0; |
| p_pcb->state = BTA_JV_ST_NONE; |
| bta_jv_free_set_pm_profile_cb(p_pcb->handle); |
| |
| // Initialize congestion flags |
| p_pcb->cong = false; |
| p_pcb->rfcomm_slot_id = 0; |
| int si = BTA_JV_RFC_HDL_TO_SIDX(p_pcb->handle); |
| if (0 <= si && si < BTA_JV_MAX_RFC_SR_SESSION) p_cb->rfc_hdl[si] = 0; |
| p_pcb->handle = 0; |
| p_cb->curr_sess--; |
| if (p_cb->curr_sess == 0) { |
| p_cb->scn = 0; |
| bta_jv_free_sec_id(&p_cb->sec_id); |
| p_cb->p_cback = NULL; |
| p_cb->handle = 0; |
| p_cb->curr_sess = -1; |
| } |
| if (remove_server) { |
| bta_jv_free_sec_id(&p_cb->sec_id); |
| } |
| } |
| return status; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_free_l2c_cb |
| * |
| * Description free the given L2CAP control block |
| * |
| * Returns |
| * |
| ******************************************************************************/ |
| tBTA_JV_STATUS bta_jv_free_l2c_cb(tBTA_JV_L2C_CB* p_cb) { |
| tBTA_JV_STATUS status = BTA_JV_SUCCESS; |
| |
| if (BTA_JV_ST_NONE != p_cb->state) { |
| bta_jv_free_set_pm_profile_cb((uint32_t)p_cb->handle); |
| if (GAP_ConnClose(p_cb->handle) != BT_PASS) status = BTA_JV_FAILURE; |
| } |
| p_cb->psm = 0; |
| p_cb->state = BTA_JV_ST_NONE; |
| p_cb->cong = false; |
| bta_jv_free_sec_id(&p_cb->sec_id); |
| p_cb->p_cback = NULL; |
| return status; |
| } |
| |
| /******************************************************************************* |
| * |
| * |
| * Function bta_jv_clear_pm_cb |
| * |
| * Description clears jv pm control block and optionally calls |
| * bta_sys_conn_close() |
| * In general close_conn should be set to true to remove registering |
| * with dm pm! |
| * |
| * WARNING: Make sure to clear pointer form port or l2c to this control block |
| * too! |
| * |
| ******************************************************************************/ |
| static void bta_jv_clear_pm_cb(tBTA_JV_PM_CB* p_pm_cb, bool close_conn) { |
| /* needs to be called if registered with bta pm, otherwise we may run out of |
| * dm pm slots! */ |
| if (close_conn) |
| bta_sys_conn_close(BTA_ID_JV, p_pm_cb->app_id, p_pm_cb->peer_bd_addr); |
| p_pm_cb->state = BTA_JV_PM_FREE_ST; |
| p_pm_cb->app_id = BTA_JV_PM_ALL; |
| p_pm_cb->handle = BTA_JV_PM_HANDLE_CLEAR; |
| p_pm_cb->peer_bd_addr = RawAddress::kEmpty; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_free_set_pm_profile_cb |
| * |
| * Description free pm profile control block |
| * |
| * Returns BTA_JV_SUCCESS if cb has been freed correctly, |
| * BTA_JV_FAILURE in case of no profile has been registered or |
| * already freed |
| * |
| ******************************************************************************/ |
| static tBTA_JV_STATUS bta_jv_free_set_pm_profile_cb(uint32_t jv_handle) { |
| tBTA_JV_STATUS status = BTA_JV_FAILURE; |
| tBTA_JV_PM_CB** p_cb; |
| int i, j, bd_counter = 0, appid_counter = 0; |
| |
| for (i = 0; i < BTA_JV_PM_MAX_NUM; i++) { |
| p_cb = NULL; |
| if ((bta_jv_cb.pm_cb[i].state != BTA_JV_PM_FREE_ST) && |
| (jv_handle == bta_jv_cb.pm_cb[i].handle)) { |
| for (j = 0; j < BTA_JV_PM_MAX_NUM; j++) { |
| if (bta_jv_cb.pm_cb[j].peer_bd_addr == bta_jv_cb.pm_cb[i].peer_bd_addr) |
| bd_counter++; |
| if (bta_jv_cb.pm_cb[j].app_id == bta_jv_cb.pm_cb[i].app_id) |
| appid_counter++; |
| } |
| |
| VLOG(2) << __func__ << ": jv_handle=" << loghex(jv_handle) |
| << ", idx=" << i << "app_id=" << bta_jv_cb.pm_cb[i].app_id |
| << ", bd_counter=" << bd_counter |
| << ", appid_counter=" << appid_counter; |
| if (bd_counter > 1) { |
| bta_jv_pm_conn_idle(&bta_jv_cb.pm_cb[i]); |
| } |
| |
| if (bd_counter <= 1 || (appid_counter <= 1)) { |
| bta_jv_clear_pm_cb(&bta_jv_cb.pm_cb[i], true); |
| } else { |
| bta_jv_clear_pm_cb(&bta_jv_cb.pm_cb[i], false); |
| } |
| |
| if (BTA_JV_RFCOMM_MASK & jv_handle) { |
| uint32_t hi = |
| ((jv_handle & BTA_JV_RFC_HDL_MASK) & ~BTA_JV_RFCOMM_MASK) - 1; |
| uint32_t si = BTA_JV_RFC_HDL_TO_SIDX(jv_handle); |
| if (hi < BTA_JV_MAX_RFC_CONN && bta_jv_cb.rfc_cb[hi].p_cback && |
| si < BTA_JV_MAX_RFC_SR_SESSION && |
| bta_jv_cb.rfc_cb[hi].rfc_hdl[si]) { |
| tBTA_JV_PCB* p_pcb = |
| bta_jv_rfc_port_to_pcb(bta_jv_cb.rfc_cb[hi].rfc_hdl[si]); |
| if (p_pcb) { |
| if (NULL == p_pcb->p_pm_cb) |
| LOG(WARNING) << __func__ << ": jv_handle=" << loghex(jv_handle) |
| << ", port_handle=" << p_pcb->port_handle |
| << ", i=" << i << ", no link to pm_cb?"; |
| p_cb = &p_pcb->p_pm_cb; |
| } |
| } |
| } else { |
| if (jv_handle < BTA_JV_MAX_L2C_CONN) { |
| tBTA_JV_L2C_CB* p_l2c_cb = &bta_jv_cb.l2c_cb[jv_handle]; |
| if (NULL == p_l2c_cb->p_pm_cb) |
| LOG(WARNING) << __func__ << ": jv_handle=" << loghex(jv_handle) |
| << ", i=" << i << " no link to pm_cb?"; |
| p_cb = &p_l2c_cb->p_pm_cb; |
| } |
| } |
| if (p_cb) { |
| *p_cb = NULL; |
| status = BTA_JV_SUCCESS; |
| } |
| } |
| } |
| return status; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_alloc_set_pm_profile_cb |
| * |
| * Description set PM profile control block |
| * |
| * Returns pointer to allocated cb or NULL in case of failure |
| * |
| ******************************************************************************/ |
| static tBTA_JV_PM_CB* bta_jv_alloc_set_pm_profile_cb(uint32_t jv_handle, |
| tBTA_JV_PM_ID app_id) { |
| bool bRfcHandle = (jv_handle & BTA_JV_RFCOMM_MASK) != 0; |
| RawAddress peer_bd_addr; |
| int i, j; |
| tBTA_JV_PM_CB** pp_cb; |
| |
| for (i = 0; i < BTA_JV_PM_MAX_NUM; i++) { |
| pp_cb = NULL; |
| if (bta_jv_cb.pm_cb[i].state == BTA_JV_PM_FREE_ST) { |
| /* rfc handle bd addr retrieval requires core stack handle */ |
| if (bRfcHandle) { |
| for (j = 0; j < BTA_JV_MAX_RFC_CONN; j++) { |
| if (jv_handle == bta_jv_cb.port_cb[j].handle) { |
| pp_cb = &bta_jv_cb.port_cb[j].p_pm_cb; |
| if (PORT_SUCCESS != |
| PORT_CheckConnection(bta_jv_cb.port_cb[j].port_handle, |
| peer_bd_addr, NULL)) |
| i = BTA_JV_PM_MAX_NUM; |
| break; |
| } |
| } |
| } else { |
| /* use jv handle for l2cap bd address retrieval */ |
| for (j = 0; j < BTA_JV_MAX_L2C_CONN; j++) { |
| if (jv_handle == bta_jv_cb.l2c_cb[j].handle) { |
| pp_cb = &bta_jv_cb.l2c_cb[j].p_pm_cb; |
| const RawAddress* p_bd_addr = |
| GAP_ConnGetRemoteAddr((uint16_t)jv_handle); |
| if (p_bd_addr) |
| peer_bd_addr = *p_bd_addr; |
| else |
| i = BTA_JV_PM_MAX_NUM; |
| break; |
| } |
| } |
| } |
| VLOG(2) << __func__ << ": handle=" << loghex(jv_handle) |
| << ", app_id=" << app_id << ", idx=" << i |
| << ", BTA_JV_PM_MAX_NUM=" << BTA_JV_PM_MAX_NUM |
| << ", pp_cb=" << pp_cb; |
| break; |
| } |
| } |
| |
| if ((i != BTA_JV_PM_MAX_NUM) && (NULL != pp_cb)) { |
| *pp_cb = &bta_jv_cb.pm_cb[i]; |
| bta_jv_cb.pm_cb[i].handle = jv_handle; |
| bta_jv_cb.pm_cb[i].app_id = app_id; |
| bta_jv_cb.pm_cb[i].peer_bd_addr = peer_bd_addr; |
| bta_jv_cb.pm_cb[i].state = BTA_JV_PM_IDLE_ST; |
| return &bta_jv_cb.pm_cb[i]; |
| } |
| LOG(WARNING) << __func__ << ": handle=" << loghex(jv_handle) |
| << ", app_id=" << app_id << ", return NULL"; |
| return NULL; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_check_psm |
| * |
| * Description for now use only the legal PSM per JSR82 spec |
| * |
| * Returns true, if allowed |
| * |
| ******************************************************************************/ |
| bool bta_jv_check_psm(uint16_t psm) { |
| bool ret = false; |
| |
| if (L2C_IS_VALID_PSM(psm)) { |
| if (psm < 0x1001) { |
| /* see if this is defined by spec */ |
| switch (psm) { |
| case SDP_PSM: /* 1 */ |
| case BT_PSM_RFCOMM: /* 3 */ |
| /* do not allow java app to use these 2 PSMs */ |
| break; |
| |
| case TCS_PSM_INTERCOM: /* 5 */ |
| case TCS_PSM_CORDLESS: /* 7 */ |
| if (!bta_sys_is_register(BTA_ID_CT) && |
| !bta_sys_is_register(BTA_ID_CG)) |
| ret = true; |
| break; |
| |
| case BT_PSM_BNEP: /* F */ |
| if (!bta_sys_is_register(BTA_ID_PAN)) ret = true; |
| break; |
| |
| case HID_PSM_CONTROL: /* 0x11 */ |
| case HID_PSM_INTERRUPT: /* 0x13 */ |
| // FIX: allow HID Device and HID Host to coexist |
| if (!bta_sys_is_register(BTA_ID_HD) || |
| !bta_sys_is_register(BTA_ID_HH)) |
| ret = true; |
| break; |
| |
| case AVCT_PSM: /* 0x17 */ |
| case AVDT_PSM: /* 0x19 */ |
| if ((!bta_sys_is_register(BTA_ID_AV)) && |
| (!bta_sys_is_register(BTA_ID_AVK))) |
| ret = true; |
| break; |
| |
| default: |
| ret = true; |
| break; |
| } |
| } else { |
| ret = true; |
| } |
| } |
| return ret; |
| } |
| |
| /* Initialises the JAVA I/F */ |
| void bta_jv_enable(tBTA_JV_DM_CBACK* p_cback) { |
| tBTA_JV_STATUS status = BTA_JV_SUCCESS; |
| bta_jv_cb.p_dm_cback = p_cback; |
| tBTA_JV bta_jv; |
| bta_jv.status = status; |
| bta_jv_cb.p_dm_cback(BTA_JV_ENABLE_EVT, &bta_jv, 0); |
| memset(bta_jv_cb.free_psm_list, 0, sizeof(bta_jv_cb.free_psm_list)); |
| } |
| |
| /** Disables the BT device manager free the resources used by java */ |
| void bta_jv_disable() { LOG(ERROR) << __func__; } |
| |
| /** |
| * We keep a list of PSM's that have been freed from JAVA, for reuse. |
| * This function will return a free PSM, and delete it from the free |
| * list. |
| * If no free PSMs exist, 0 will be returned. |
| */ |
| static uint16_t bta_jv_get_free_psm() { |
| const int cnt = |
| sizeof(bta_jv_cb.free_psm_list) / sizeof(bta_jv_cb.free_psm_list[0]); |
| for (int i = 0; i < cnt; i++) { |
| uint16_t psm = bta_jv_cb.free_psm_list[i]; |
| if (psm != 0) { |
| VLOG(2) << __func__ << ": Reusing PSM=" << loghex(psm); |
| bta_jv_cb.free_psm_list[i] = 0; |
| return psm; |
| } |
| } |
| return 0; |
| } |
| |
| static void bta_jv_set_free_psm(uint16_t psm) { |
| int free_index = -1; |
| const int cnt = |
| sizeof(bta_jv_cb.free_psm_list) / sizeof(bta_jv_cb.free_psm_list[0]); |
| for (int i = 0; i < cnt; i++) { |
| if (bta_jv_cb.free_psm_list[i] == 0) { |
| free_index = i; |
| } else if (psm == bta_jv_cb.free_psm_list[i]) { |
| return; // PSM already freed? |
| } |
| } |
| if (free_index != -1) { |
| bta_jv_cb.free_psm_list[free_index] = psm; |
| VLOG(2) << __func__ << ": Recycling PSM=" << loghex(psm); |
| } else { |
| LOG(ERROR) << __func__ << ": unable to free psm=" << loghex(psm) |
| << " no more free slots"; |
| } |
| } |
| |
| /** Obtain a free SCN (Server Channel Number) (RFCOMM channel or L2CAP PSM) */ |
| void bta_jv_get_channel_id( |
| int32_t type /* One of BTA_JV_CONN_TYPE_ */, |
| int32_t channel /* optionally request a specific channel */, |
| uint32_t l2cap_socket_id, uint32_t rfcomm_slot_id) { |
| uint16_t psm = 0; |
| |
| switch (type) { |
| case BTA_JV_CONN_TYPE_RFCOMM: { |
| uint8_t scn = 0; |
| if (channel > 0) { |
| if (!BTM_TryAllocateSCN(channel)) { |
| LOG(ERROR) << "rfc channel=" << channel |
| << " already in use or invalid"; |
| channel = 0; |
| } |
| } else { |
| channel = BTM_AllocateSCN(); |
| if (channel == 0) { |
| LOG(ERROR) << "run out of rfc channels"; |
| channel = 0; |
| } |
| } |
| if (channel != 0) { |
| bta_jv_cb.scn[channel - 1] = true; |
| scn = (uint8_t)channel; |
| } |
| if (bta_jv_cb.p_dm_cback) { |
| tBTA_JV bta_jv; |
| bta_jv.scn = scn; |
| bta_jv_cb.p_dm_cback(BTA_JV_GET_SCN_EVT, &bta_jv, rfcomm_slot_id); |
| } |
| return; |
| } |
| case BTA_JV_CONN_TYPE_L2CAP: |
| psm = bta_jv_get_free_psm(); |
| if (psm == 0) { |
| psm = L2CA_AllocatePSM(); |
| VLOG(2) << __func__ << ": returned PSM=" << loghex(psm); |
| } |
| break; |
| case BTA_JV_CONN_TYPE_L2CAP_LE: |
| psm = L2CA_AllocateLePSM(); |
| if (psm == 0) { |
| LOG(ERROR) << __func__ << ": Error: No free LE PSM available"; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| if (bta_jv_cb.p_dm_cback) { |
| tBTA_JV bta_jv; |
| bta_jv.psm = psm; |
| bta_jv_cb.p_dm_cback(BTA_JV_GET_PSM_EVT, &bta_jv, l2cap_socket_id); |
| } |
| } |
| |
| /** free a SCN */ |
| void bta_jv_free_scn(int32_t type /* One of BTA_JV_CONN_TYPE_ */, |
| uint16_t scn) { |
| switch (type) { |
| case BTA_JV_CONN_TYPE_RFCOMM: { |
| if (scn > 0 && scn <= BTA_JV_MAX_SCN && bta_jv_cb.scn[scn - 1]) { |
| /* this scn is used by JV */ |
| bta_jv_cb.scn[scn - 1] = false; |
| BTM_FreeSCN(scn); |
| } |
| break; |
| } |
| case BTA_JV_CONN_TYPE_L2CAP: |
| bta_jv_set_free_psm(scn); |
| break; |
| case BTA_JV_CONN_TYPE_L2CAP_LE: |
| VLOG(2) << __func__ << ": type=BTA_JV_CONN_TYPE_L2CAP_LE. psm=" << scn; |
| L2CA_FreeLePSM(scn); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_start_discovery_cback |
| * |
| * Description Callback for Start Discovery |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_jv_start_discovery_cback(uint16_t result, void* user_data) { |
| tBTA_JV_STATUS status; |
| uint32_t* p_rfcomm_slot_id = static_cast<uint32_t*>(user_data); |
| |
| VLOG(2) << __func__ << ": res=" << loghex(result); |
| |
| bta_jv_cb.sdp_active = BTA_JV_SDP_ACT_NONE; |
| if (bta_jv_cb.p_dm_cback) { |
| tBTA_JV_DISCOVERY_COMP dcomp; |
| dcomp.scn = 0; |
| status = BTA_JV_FAILURE; |
| if (result == SDP_SUCCESS || result == SDP_DB_FULL) { |
| tSDP_DISC_REC* p_sdp_rec = NULL; |
| tSDP_PROTOCOL_ELEM pe; |
| VLOG(2) << __func__ << ": bta_jv_cb.uuid=" << bta_jv_cb.uuid; |
| p_sdp_rec = SDP_FindServiceUUIDInDb(p_bta_jv_cfg->p_sdp_db, |
| bta_jv_cb.uuid, p_sdp_rec); |
| VLOG(2) << __func__ << ": p_sdp_rec=" << p_sdp_rec; |
| if (p_sdp_rec && |
| SDP_FindProtocolListElemInRec(p_sdp_rec, UUID_PROTOCOL_RFCOMM, &pe)) { |
| dcomp.scn = (uint8_t)pe.params[0]; |
| status = BTA_JV_SUCCESS; |
| } |
| } |
| |
| dcomp.status = status; |
| tBTA_JV bta_jv; |
| bta_jv.disc_comp = dcomp; |
| bta_jv_cb.p_dm_cback(BTA_JV_DISCOVERY_COMP_EVT, &bta_jv, *p_rfcomm_slot_id); |
| osi_free(p_rfcomm_slot_id); |
| } |
| } |
| |
| /* Discovers services on a remote device */ |
| void bta_jv_start_discovery(const RawAddress& bd_addr, uint16_t num_uuid, |
| bluetooth::Uuid* uuid_list, |
| uint32_t rfcomm_slot_id) { |
| tBTA_JV_STATUS status = BTA_JV_FAILURE; |
| VLOG(2) << __func__ << ": in, sdp_active=" << bta_jv_cb.sdp_active; |
| if (bta_jv_cb.sdp_active != BTA_JV_SDP_ACT_NONE) { |
| /* SDP is still in progress */ |
| status = BTA_JV_BUSY; |
| if (bta_jv_cb.p_dm_cback) { |
| tBTA_JV bta_jv; |
| bta_jv.status = status; |
| bta_jv_cb.p_dm_cback(BTA_JV_DISCOVERY_COMP_EVT, &bta_jv, rfcomm_slot_id); |
| } |
| return; |
| } |
| |
| /* init the database/set up the filter */ |
| VLOG(2) << __func__ << ": call SDP_InitDiscoveryDb, num_uuid=", num_uuid; |
| SDP_InitDiscoveryDb(p_bta_jv_cfg->p_sdp_db, p_bta_jv_cfg->sdp_db_size, |
| num_uuid, uuid_list, 0, NULL); |
| |
| /* tell SDP to keep the raw data */ |
| p_bta_jv_cfg->p_sdp_db->raw_data = p_bta_jv_cfg->p_sdp_raw_data; |
| p_bta_jv_cfg->p_sdp_db->raw_size = p_bta_jv_cfg->sdp_raw_size; |
| |
| bta_jv_cb.p_sel_raw_data = 0; |
| bta_jv_cb.uuid = uuid_list[0]; |
| |
| bta_jv_cb.sdp_active = BTA_JV_SDP_ACT_YES; |
| |
| uint32_t* rfcomm_slot_id_copy = (uint32_t*)osi_malloc(sizeof(uint32_t)); |
| *rfcomm_slot_id_copy = rfcomm_slot_id; |
| |
| if (!SDP_ServiceSearchAttributeRequest2(bd_addr, p_bta_jv_cfg->p_sdp_db, |
| bta_jv_start_discovery_cback, |
| (void*)rfcomm_slot_id_copy)) { |
| bta_jv_cb.sdp_active = BTA_JV_SDP_ACT_NONE; |
| /* failed to start SDP. report the failure right away */ |
| if (bta_jv_cb.p_dm_cback) { |
| tBTA_JV bta_jv; |
| bta_jv.status = status; |
| bta_jv_cb.p_dm_cback(BTA_JV_DISCOVERY_COMP_EVT, &bta_jv, rfcomm_slot_id); |
| } |
| } |
| /* |
| else report the result when the cback is called |
| */ |
| } |
| |
| /* Create an SDP record with the given attributes */ |
| void bta_jv_create_record(uint32_t rfcomm_slot_id) { |
| tBTA_JV_CREATE_RECORD evt_data; |
| evt_data.status = BTA_JV_SUCCESS; |
| if (bta_jv_cb.p_dm_cback) { |
| // callback immediately to create the sdp record in stack thread context |
| tBTA_JV bta_jv; |
| bta_jv.create_rec = evt_data; |
| bta_jv_cb.p_dm_cback(BTA_JV_CREATE_RECORD_EVT, &bta_jv, rfcomm_slot_id); |
| } |
| } |
| |
| /* Delete an SDP record */ |
| void bta_jv_delete_record(uint32_t handle) { |
| if (handle) { |
| /* this is a record created by btif layer*/ |
| SDP_DeleteRecord(handle); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_l2cap_client_cback |
| * |
| * Description handles the l2cap client events |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_jv_l2cap_client_cback(uint16_t gap_handle, uint16_t event, |
| tGAP_CB_DATA* data) { |
| tBTA_JV_L2C_CB* p_cb = &bta_jv_cb.l2c_cb[gap_handle]; |
| tBTA_JV evt_data; |
| |
| if (gap_handle >= BTA_JV_MAX_L2C_CONN && !p_cb->p_cback) return; |
| |
| VLOG(2) << __func__ << ": gap_handle=" << gap_handle |
| << ", evt=" << loghex(event); |
| evt_data.l2c_open.status = BTA_JV_SUCCESS; |
| evt_data.l2c_open.handle = gap_handle; |
| |
| switch (event) { |
| case GAP_EVT_CONN_OPENED: |
| evt_data.l2c_open.rem_bda = *GAP_ConnGetRemoteAddr(gap_handle); |
| evt_data.l2c_open.tx_mtu = GAP_ConnGetRemMtuSize(gap_handle); |
| p_cb->state = BTA_JV_ST_CL_OPEN; |
| p_cb->p_cback(BTA_JV_L2CAP_OPEN_EVT, &evt_data, p_cb->l2cap_socket_id); |
| break; |
| |
| case GAP_EVT_CONN_CLOSED: |
| p_cb->state = BTA_JV_ST_NONE; |
| bta_jv_free_sec_id(&p_cb->sec_id); |
| evt_data.l2c_close.async = true; |
| p_cb->p_cback(BTA_JV_L2CAP_CLOSE_EVT, &evt_data, p_cb->l2cap_socket_id); |
| p_cb->p_cback = NULL; |
| break; |
| |
| case GAP_EVT_CONN_DATA_AVAIL: |
| evt_data.data_ind.handle = gap_handle; |
| /* Reset idle timer to avoid requesting sniff mode while receiving data */ |
| bta_jv_pm_conn_busy(p_cb->p_pm_cb); |
| p_cb->p_cback(BTA_JV_L2CAP_DATA_IND_EVT, &evt_data, |
| p_cb->l2cap_socket_id); |
| bta_jv_pm_conn_idle(p_cb->p_pm_cb); |
| break; |
| |
| case GAP_EVT_TX_EMPTY: |
| bta_jv_pm_conn_idle(p_cb->p_pm_cb); |
| break; |
| |
| case GAP_EVT_CONN_CONGESTED: |
| case GAP_EVT_CONN_UNCONGESTED: |
| p_cb->cong = (event == GAP_EVT_CONN_CONGESTED) ? true : false; |
| evt_data.l2c_cong.cong = p_cb->cong; |
| p_cb->p_cback(BTA_JV_L2CAP_CONG_EVT, &evt_data, p_cb->l2cap_socket_id); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /* makes an l2cap client connection */ |
| void bta_jv_l2cap_connect(int32_t type, tBTA_SEC sec_mask, tBTA_JV_ROLE role, |
| uint16_t remote_psm, uint16_t rx_mtu, |
| const RawAddress& peer_bd_addr, |
| std::unique_ptr<tL2CAP_CFG_INFO> cfg_param, |
| std::unique_ptr<tL2CAP_ERTM_INFO> ertm_info, |
| tBTA_JV_L2CAP_CBACK* p_cback, |
| uint32_t l2cap_socket_id) { |
| uint16_t handle = GAP_INVALID_HANDLE; |
| uint8_t chan_mode_mask = GAP_FCR_CHAN_OPT_BASIC; |
| |
| tL2CAP_CFG_INFO cfg; |
| memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO)); |
| if (cfg_param) { |
| cfg = *cfg_param; |
| if (cfg.fcr_present && cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) { |
| chan_mode_mask = GAP_FCR_CHAN_OPT_ERTM; |
| } |
| } |
| |
| /* We need to use this value for MTU to be able to handle cases where cfg is |
| * not set in req. */ |
| cfg.mtu_present = true; |
| cfg.mtu = rx_mtu; |
| |
| /* TODO: DM role manager |
| L2CA_SetDesireRole(role); |
| */ |
| |
| uint8_t sec_id = bta_jv_alloc_sec_id(); |
| tBTA_JV_L2CAP_CL_INIT evt_data; |
| evt_data.sec_id = sec_id; |
| evt_data.status = BTA_JV_FAILURE; |
| |
| if (sec_id) { |
| /* PSM checking is not required for LE COC */ |
| if ((type != BTA_JV_CONN_TYPE_L2CAP) || |
| (bta_jv_check_psm(remote_psm))) /* allowed */ |
| { |
| uint16_t max_mps = 0xffff; // Let GAP_ConnOpen set the max_mps. |
| handle = GAP_ConnOpen("", sec_id, 0, &peer_bd_addr, remote_psm, max_mps, |
| &cfg, ertm_info.get(), sec_mask, chan_mode_mask, |
| bta_jv_l2cap_client_cback, type); |
| if (handle != GAP_INVALID_HANDLE) { |
| evt_data.status = BTA_JV_SUCCESS; |
| } |
| } |
| } |
| |
| if (evt_data.status == BTA_JV_SUCCESS) { |
| tBTA_JV_L2C_CB* p_cb; |
| p_cb = &bta_jv_cb.l2c_cb[handle]; |
| p_cb->handle = handle; |
| p_cb->p_cback = p_cback; |
| p_cb->l2cap_socket_id = l2cap_socket_id; |
| p_cb->psm = 0; /* not a server */ |
| p_cb->sec_id = sec_id; |
| p_cb->state = BTA_JV_ST_CL_OPENING; |
| } else { |
| bta_jv_free_sec_id(&sec_id); |
| } |
| |
| evt_data.handle = handle; |
| if (p_cback) { |
| tBTA_JV bta_jv; |
| bta_jv.l2c_cl_init = evt_data; |
| p_cback(BTA_JV_L2CAP_CL_INIT_EVT, &bta_jv, l2cap_socket_id); |
| } |
| } |
| |
| /** Close an L2CAP client connection */ |
| void bta_jv_l2cap_close(uint32_t handle, tBTA_JV_L2C_CB* p_cb) { |
| tBTA_JV_L2CAP_CLOSE evt_data; |
| tBTA_JV_L2CAP_CBACK* p_cback = p_cb->p_cback; |
| uint32_t l2cap_socket_id = p_cb->l2cap_socket_id; |
| |
| evt_data.handle = handle; |
| evt_data.status = bta_jv_free_l2c_cb(p_cb); |
| evt_data.async = false; |
| |
| if (p_cback) { |
| tBTA_JV bta_jv; |
| bta_jv.l2c_close = evt_data; |
| p_cback(BTA_JV_L2CAP_CLOSE_EVT, &bta_jv, l2cap_socket_id); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_l2cap_server_cback |
| * |
| * Description handles the l2cap server callback |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_jv_l2cap_server_cback(uint16_t gap_handle, uint16_t event, |
| tGAP_CB_DATA* data) { |
| tBTA_JV_L2C_CB* p_cb = &bta_jv_cb.l2c_cb[gap_handle]; |
| tBTA_JV evt_data; |
| tBTA_JV_L2CAP_CBACK* p_cback; |
| uint32_t socket_id; |
| |
| if (gap_handle >= BTA_JV_MAX_L2C_CONN && !p_cb->p_cback) return; |
| |
| VLOG(2) << __func__ << ": gap_handle=" << gap_handle |
| << ", evt=" << loghex(event); |
| evt_data.l2c_open.status = BTA_JV_SUCCESS; |
| evt_data.l2c_open.handle = gap_handle; |
| |
| switch (event) { |
| case GAP_EVT_CONN_OPENED: |
| evt_data.l2c_open.rem_bda = *GAP_ConnGetRemoteAddr(gap_handle); |
| evt_data.l2c_open.tx_mtu = GAP_ConnGetRemMtuSize(gap_handle); |
| p_cb->state = BTA_JV_ST_SR_OPEN; |
| p_cb->p_cback(BTA_JV_L2CAP_OPEN_EVT, &evt_data, p_cb->l2cap_socket_id); |
| break; |
| |
| case GAP_EVT_CONN_CLOSED: |
| evt_data.l2c_close.async = true; |
| evt_data.l2c_close.handle = p_cb->handle; |
| p_cback = p_cb->p_cback; |
| socket_id = p_cb->l2cap_socket_id; |
| evt_data.l2c_close.status = bta_jv_free_l2c_cb(p_cb); |
| p_cback(BTA_JV_L2CAP_CLOSE_EVT, &evt_data, socket_id); |
| break; |
| |
| case GAP_EVT_CONN_DATA_AVAIL: |
| evt_data.data_ind.handle = gap_handle; |
| /* Reset idle timer to avoid requesting sniff mode while receiving data */ |
| bta_jv_pm_conn_busy(p_cb->p_pm_cb); |
| p_cb->p_cback(BTA_JV_L2CAP_DATA_IND_EVT, &evt_data, |
| p_cb->l2cap_socket_id); |
| bta_jv_pm_conn_idle(p_cb->p_pm_cb); |
| break; |
| |
| case GAP_EVT_TX_EMPTY: |
| bta_jv_pm_conn_idle(p_cb->p_pm_cb); |
| break; |
| |
| case GAP_EVT_CONN_CONGESTED: |
| case GAP_EVT_CONN_UNCONGESTED: |
| p_cb->cong = (event == GAP_EVT_CONN_CONGESTED) ? true : false; |
| evt_data.l2c_cong.cong = p_cb->cong; |
| p_cb->p_cback(BTA_JV_L2CAP_CONG_EVT, &evt_data, p_cb->l2cap_socket_id); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /** starts an L2CAP server */ |
| void bta_jv_l2cap_start_server(int32_t type, tBTA_SEC sec_mask, |
| tBTA_JV_ROLE role, uint16_t local_psm, |
| uint16_t rx_mtu, |
| std::unique_ptr<tL2CAP_CFG_INFO> cfg_param, |
| std::unique_ptr<tL2CAP_ERTM_INFO> ertm_info, |
| tBTA_JV_L2CAP_CBACK* p_cback, |
| uint32_t l2cap_socket_id) { |
| uint16_t handle; |
| tBTA_JV_L2CAP_START evt_data; |
| uint8_t chan_mode_mask = GAP_FCR_CHAN_OPT_BASIC; |
| |
| tL2CAP_CFG_INFO cfg; |
| memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO)); |
| if (cfg_param) { |
| cfg = *cfg_param; |
| if (cfg.fcr_present && cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) { |
| chan_mode_mask = GAP_FCR_CHAN_OPT_ERTM; |
| } |
| } |
| |
| // FIX: MTU=0 means not present |
| if (rx_mtu > 0) { |
| cfg.mtu_present = true; |
| cfg.mtu = rx_mtu; |
| } else { |
| cfg.mtu_present = false; |
| cfg.mtu = 0; |
| } |
| |
| /* TODO DM role manager |
| L2CA_SetDesireRole(role); |
| */ |
| |
| uint8_t sec_id = bta_jv_alloc_sec_id(); |
| uint16_t max_mps = 0xffff; // Let GAP_ConnOpen set the max_mps. |
| /* PSM checking is not required for LE COC */ |
| if (0 == sec_id || |
| ((type == BTA_JV_CONN_TYPE_L2CAP) && (!bta_jv_check_psm(local_psm))) || |
| (handle = GAP_ConnOpen("JV L2CAP", sec_id, 1, nullptr, local_psm, max_mps, |
| &cfg, ertm_info.get(), sec_mask, chan_mode_mask, |
| bta_jv_l2cap_server_cback, type)) == |
| GAP_INVALID_HANDLE) { |
| bta_jv_free_sec_id(&sec_id); |
| evt_data.status = BTA_JV_FAILURE; |
| } else { |
| tBTA_JV_L2C_CB* p_cb = &bta_jv_cb.l2c_cb[handle]; |
| evt_data.status = BTA_JV_SUCCESS; |
| evt_data.handle = handle; |
| evt_data.sec_id = sec_id; |
| p_cb->p_cback = p_cback; |
| p_cb->l2cap_socket_id = l2cap_socket_id; |
| p_cb->handle = handle; |
| p_cb->sec_id = sec_id; |
| p_cb->state = BTA_JV_ST_SR_LISTEN; |
| p_cb->psm = local_psm; |
| } |
| |
| if (p_cback) { |
| tBTA_JV bta_jv; |
| bta_jv.l2c_start = evt_data; |
| p_cback(BTA_JV_L2CAP_START_EVT, &bta_jv, l2cap_socket_id); |
| } |
| } |
| |
| /* stops an L2CAP server */ |
| void bta_jv_l2cap_stop_server(uint16_t local_psm, uint32_t l2cap_socket_id) { |
| for (int i = 0; i < BTA_JV_MAX_L2C_CONN; i++) { |
| if (bta_jv_cb.l2c_cb[i].psm == local_psm) { |
| tBTA_JV_L2C_CB* p_cb = &bta_jv_cb.l2c_cb[i]; |
| tBTA_JV_L2CAP_CBACK* p_cback = p_cb->p_cback; |
| tBTA_JV_L2CAP_CLOSE evt_data; |
| evt_data.handle = p_cb->handle; |
| evt_data.status = bta_jv_free_l2c_cb(p_cb); |
| evt_data.async = false; |
| if (p_cback) { |
| tBTA_JV bta_jv; |
| bta_jv.l2c_close = evt_data; |
| p_cback(BTA_JV_L2CAP_CLOSE_EVT, &bta_jv, l2cap_socket_id); |
| } |
| break; |
| } |
| } |
| } |
| |
| /* Write data to an L2CAP connection */ |
| void bta_jv_l2cap_write(uint32_t handle, uint32_t req_id, BT_HDR* msg, |
| uint32_t user_id, tBTA_JV_L2C_CB* p_cb) { |
| /* As we check this callback exists before the tBTA_JV_API_L2CAP_WRITE can be |
| * send through the API this check should not be needed. But the API is not |
| * designed to be used (safely at least) in a multi-threaded scheduler, hence |
| * if the peer device disconnects the l2cap link after the API is called, but |
| * before this message is handled, the ->p_cback will be cleared at this |
| * point. At first glanch this seems highly unlikely, but for all |
| * obex-profiles with two channels connected - e.g. MAP, this happens around 1 |
| * of 4 disconnects, as a disconnect on the server channel causes a disconnect |
| * to be send on the client (notification) channel, but at the peer typically |
| * disconnects both the OBEX disconnect request crosses the incoming l2cap |
| * disconnect. If p_cback is cleared, we simply discard the data. RISK: The |
| * caller must handle any cleanup based on another signal than |
| * BTA_JV_L2CAP_WRITE_EVT, which is typically not possible, as the pointer to |
| * the allocated buffer is stored in this message, and can therefore not be |
| * freed, hence we have a mem-leak-by-design.*/ |
| if (!p_cb->p_cback) { |
| /* As this pointer is checked in the API function, this occurs only when the |
| * channel is disconnected after the API function is called, but before the |
| * message is handled. */ |
| LOG(ERROR) << __func__ << ": p_cb->p_cback == NULL"; |
| osi_free(msg); |
| return; |
| } |
| |
| tBTA_JV_L2CAP_WRITE evt_data; |
| evt_data.status = BTA_JV_FAILURE; |
| evt_data.handle = handle; |
| evt_data.req_id = req_id; |
| evt_data.cong = p_cb->cong; |
| evt_data.len = msg->len; |
| |
| bta_jv_pm_conn_busy(p_cb->p_pm_cb); |
| |
| // TODO: this was set only for non-fixed channel packets. Is that needed ? |
| msg->event = BT_EVT_TO_BTU_SP_DATA; |
| |
| if (evt_data.cong) { |
| osi_free(msg); |
| } else { |
| if (GAP_ConnWriteData(handle, msg) == BT_PASS) |
| evt_data.status = BTA_JV_SUCCESS; |
| } |
| |
| tBTA_JV bta_jv; |
| bta_jv.l2c_write = evt_data; |
| p_cb->p_cback(BTA_JV_L2CAP_WRITE_EVT, &bta_jv, user_id); |
| } |
| |
| /* Write data to an L2CAP connection using Fixed channels */ |
| void bta_jv_l2cap_write_fixed(uint16_t channel, const RawAddress& addr, |
| uint32_t req_id, BT_HDR* msg, uint32_t user_id, |
| tBTA_JV_L2CAP_CBACK* p_cback) { |
| tBTA_JV_L2CAP_WRITE_FIXED evt_data; |
| evt_data.status = BTA_JV_FAILURE; |
| evt_data.channel = channel; |
| evt_data.addr = addr; |
| evt_data.req_id = req_id; |
| evt_data.len = 0; |
| |
| L2CA_SendFixedChnlData(channel, addr, msg); |
| |
| tBTA_JV bta_jv; |
| bta_jv.l2c_write_fixed = evt_data; |
| p_cback(BTA_JV_L2CAP_WRITE_FIXED_EVT, &bta_jv, user_id); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_port_data_co_cback |
| * |
| * Description port data callback function of rfcomm |
| * connections |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static int bta_jv_port_data_co_cback(uint16_t port_handle, uint8_t* buf, |
| uint16_t len, int type) { |
| tBTA_JV_RFC_CB* p_cb = bta_jv_rfc_port_to_cb(port_handle); |
| tBTA_JV_PCB* p_pcb = bta_jv_rfc_port_to_pcb(port_handle); |
| VLOG(2) << __func__ << ": p_cb=" << p_cb << ", p_pcb=" << p_pcb |
| << ", len=" << len << ", type=" << type; |
| if (p_pcb != NULL) { |
| switch (type) { |
| case DATA_CO_CALLBACK_TYPE_INCOMING: |
| return bta_co_rfc_data_incoming(p_pcb->rfcomm_slot_id, (BT_HDR*)buf); |
| case DATA_CO_CALLBACK_TYPE_OUTGOING_SIZE: |
| return bta_co_rfc_data_outgoing_size(p_pcb->rfcomm_slot_id, (int*)buf); |
| case DATA_CO_CALLBACK_TYPE_OUTGOING: |
| return bta_co_rfc_data_outgoing(p_pcb->rfcomm_slot_id, buf, len); |
| default: |
| LOG(ERROR) << __func__ << ": unknown callout type=" << type; |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_port_mgmt_cl_cback |
| * |
| * Description callback for port mamangement function of rfcomm |
| * client connections |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_jv_port_mgmt_cl_cback(uint32_t code, uint16_t port_handle) { |
| tBTA_JV_RFC_CB* p_cb = bta_jv_rfc_port_to_cb(port_handle); |
| tBTA_JV_PCB* p_pcb = bta_jv_rfc_port_to_pcb(port_handle); |
| tBTA_JV evt_data; |
| RawAddress rem_bda; |
| uint16_t lcid; |
| tBTA_JV_RFCOMM_CBACK* p_cback; /* the callback function */ |
| |
| VLOG(2) << __func__ << ": code=" << code << ", port_handle=" << port_handle; |
| if (NULL == p_cb || NULL == p_cb->p_cback) return; |
| |
| VLOG(2) << __func__ << ": code=" << code << ", port_handle=" << port_handle |
| << ", handle=" << p_cb->handle; |
| |
| PORT_CheckConnection(port_handle, rem_bda, &lcid); |
| |
| if (code == PORT_SUCCESS) { |
| evt_data.rfc_open.handle = p_cb->handle; |
| evt_data.rfc_open.status = BTA_JV_SUCCESS; |
| evt_data.rfc_open.rem_bda = rem_bda; |
| p_pcb->state = BTA_JV_ST_CL_OPEN; |
| p_cb->p_cback(BTA_JV_RFCOMM_OPEN_EVT, &evt_data, p_pcb->rfcomm_slot_id); |
| } else { |
| evt_data.rfc_close.handle = p_cb->handle; |
| evt_data.rfc_close.status = BTA_JV_FAILURE; |
| evt_data.rfc_close.port_status = code; |
| evt_data.rfc_close.async = true; |
| if (p_pcb->state == BTA_JV_ST_CL_CLOSING) { |
| evt_data.rfc_close.async = false; |
| } |
| // p_pcb->state = BTA_JV_ST_NONE; |
| // p_pcb->cong = false; |
| p_cback = p_cb->p_cback; |
| p_cback(BTA_JV_RFCOMM_CLOSE_EVT, &evt_data, p_pcb->rfcomm_slot_id); |
| // bta_jv_free_rfc_cb(p_cb, p_pcb); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_port_event_cl_cback |
| * |
| * Description Callback for RFCOMM client port events |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_jv_port_event_cl_cback(uint32_t code, uint16_t port_handle) { |
| tBTA_JV_RFC_CB* p_cb = bta_jv_rfc_port_to_cb(port_handle); |
| tBTA_JV_PCB* p_pcb = bta_jv_rfc_port_to_pcb(port_handle); |
| tBTA_JV evt_data; |
| |
| VLOG(2) << __func__ << ": port_handle=" << port_handle; |
| if (NULL == p_cb || NULL == p_cb->p_cback) return; |
| |
| VLOG(2) << __func__ << ": code=" << loghex(code) |
| << ", port_handle=" << port_handle << ", handle=" << p_cb->handle; |
| if (code & PORT_EV_RXCHAR) { |
| evt_data.data_ind.handle = p_cb->handle; |
| p_cb->p_cback(BTA_JV_RFCOMM_DATA_IND_EVT, &evt_data, p_pcb->rfcomm_slot_id); |
| } |
| |
| if (code & PORT_EV_FC) { |
| p_pcb->cong = (code & PORT_EV_FCS) ? false : true; |
| evt_data.rfc_cong.cong = p_pcb->cong; |
| evt_data.rfc_cong.handle = p_cb->handle; |
| evt_data.rfc_cong.status = BTA_JV_SUCCESS; |
| p_cb->p_cback(BTA_JV_RFCOMM_CONG_EVT, &evt_data, p_pcb->rfcomm_slot_id); |
| } |
| |
| if (code & PORT_EV_TXEMPTY) { |
| bta_jv_pm_conn_idle(p_pcb->p_pm_cb); |
| } |
| } |
| |
| /* Client initiates an RFCOMM connection */ |
| void bta_jv_rfcomm_connect(tBTA_SEC sec_mask, tBTA_JV_ROLE role, |
| uint8_t remote_scn, const RawAddress& peer_bd_addr, |
| tBTA_JV_RFCOMM_CBACK* p_cback, |
| uint32_t rfcomm_slot_id) { |
| uint16_t handle = 0; |
| uint32_t event_mask = BTA_JV_RFC_EV_MASK; |
| tPORT_STATE port_state; |
| |
| /* TODO DM role manager |
| L2CA_SetDesireRole(role); |
| */ |
| |
| uint8_t sec_id = bta_jv_alloc_sec_id(); |
| |
| tBTA_JV_RFCOMM_CL_INIT evt_data; |
| memset(&evt_data, 0, sizeof(evt_data)); |
| evt_data.sec_id = sec_id; |
| evt_data.status = BTA_JV_SUCCESS; |
| if (0 == sec_id || |
| !BTM_SetSecurityLevel(true, "", sec_id, sec_mask, BT_PSM_RFCOMM, |
| BTM_SEC_PROTO_RFCOMM, remote_scn)) { |
| evt_data.status = BTA_JV_FAILURE; |
| LOG(ERROR) << __func__ << ": sec_id=" << +sec_id |
| << " is zero or BTM_SetSecurityLevel failed, remote_scn:" |
| << +remote_scn; |
| } |
| |
| if (evt_data.status == BTA_JV_SUCCESS && |
| RFCOMM_CreateConnection(UUID_SERVCLASS_SERIAL_PORT, remote_scn, false, |
| BTA_JV_DEF_RFC_MTU, peer_bd_addr, &handle, |
| bta_jv_port_mgmt_cl_cback) != PORT_SUCCESS) { |
| LOG(ERROR) << __func__ << ": RFCOMM_CreateConnection failed"; |
| evt_data.status = BTA_JV_FAILURE; |
| } |
| if (evt_data.status == BTA_JV_SUCCESS) { |
| tBTA_JV_PCB* p_pcb; |
| tBTA_JV_RFC_CB* p_cb = bta_jv_alloc_rfc_cb(handle, &p_pcb); |
| if (p_cb) { |
| p_cb->p_cback = p_cback; |
| p_cb->sec_id = sec_id; |
| p_cb->scn = 0; |
| p_pcb->state = BTA_JV_ST_CL_OPENING; |
| p_pcb->rfcomm_slot_id = rfcomm_slot_id; |
| evt_data.use_co = true; |
| |
| PORT_SetEventCallback(handle, bta_jv_port_event_cl_cback); |
| PORT_SetEventMask(handle, event_mask); |
| PORT_SetDataCOCallback(handle, bta_jv_port_data_co_cback); |
| |
| PORT_GetState(handle, &port_state); |
| |
| port_state.fc_type = (PORT_FC_CTS_ON_INPUT | PORT_FC_CTS_ON_OUTPUT); |
| |
| PORT_SetState(handle, &port_state); |
| |
| evt_data.handle = p_cb->handle; |
| } else { |
| evt_data.status = BTA_JV_FAILURE; |
| LOG(ERROR) << __func__ << ": run out of rfc control block"; |
| } |
| } |
| tBTA_JV bta_jv; |
| bta_jv.rfc_cl_init = evt_data; |
| p_cback(BTA_JV_RFCOMM_CL_INIT_EVT, &bta_jv, rfcomm_slot_id); |
| if (bta_jv.rfc_cl_init.status == BTA_JV_FAILURE) { |
| if (sec_id) bta_jv_free_sec_id(&sec_id); |
| if (handle) RFCOMM_RemoveConnection(handle); |
| } |
| } |
| |
| static int find_rfc_pcb(uint32_t rfcomm_slot_id, tBTA_JV_RFC_CB** cb, |
| tBTA_JV_PCB** pcb) { |
| *cb = NULL; |
| *pcb = NULL; |
| int i; |
| for (i = 0; i < MAX_RFC_PORTS; i++) { |
| uint32_t rfc_handle = bta_jv_cb.port_cb[i].handle & BTA_JV_RFC_HDL_MASK; |
| rfc_handle &= ~BTA_JV_RFCOMM_MASK; |
| if (rfc_handle && bta_jv_cb.port_cb[i].rfcomm_slot_id == rfcomm_slot_id) { |
| *pcb = &bta_jv_cb.port_cb[i]; |
| *cb = &bta_jv_cb.rfc_cb[rfc_handle - 1]; |
| VLOG(2) << __func__ << ": FOUND rfc_cb_handle=" << loghex(rfc_handle) |
| << ", port.jv_handle=" << loghex((*pcb)->handle) |
| << ", state=" << (*pcb)->state |
| << ", rfc_cb->handle=" << loghex((*cb)->handle); |
| return 1; |
| } |
| } |
| VLOG(2) << __func__ |
| << ": cannot find rfc_cb from user data:" << rfcomm_slot_id; |
| return 0; |
| } |
| |
| /* Close an RFCOMM connection */ |
| void bta_jv_rfcomm_close(uint32_t handle, uint32_t rfcomm_slot_id) { |
| if (!handle) { |
| LOG(ERROR) << __func__ << ": rfc handle is null"; |
| return; |
| } |
| |
| VLOG(2) << __func__ << ": rfc handle=" << handle; |
| |
| tBTA_JV_RFC_CB* p_cb = NULL; |
| tBTA_JV_PCB* p_pcb = NULL; |
| |
| if (!find_rfc_pcb(rfcomm_slot_id, &p_cb, &p_pcb)) return; |
| bta_jv_free_rfc_cb(p_cb, p_pcb); |
| VLOG(2) << __func__ << ": sec id in use=" << get_sec_id_used() |
| << ", rfc_cb in use=" << get_rfc_cb_used(); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_port_mgmt_sr_cback |
| * |
| * Description callback for port mamangement function of rfcomm |
| * server connections |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_jv_port_mgmt_sr_cback(uint32_t code, uint16_t port_handle) { |
| tBTA_JV_PCB* p_pcb = bta_jv_rfc_port_to_pcb(port_handle); |
| tBTA_JV_RFC_CB* p_cb = bta_jv_rfc_port_to_cb(port_handle); |
| tBTA_JV evt_data; |
| RawAddress rem_bda; |
| uint16_t lcid; |
| VLOG(2) << __func__ << ": code=" << code << ", port_handle=" << port_handle; |
| if (NULL == p_cb || NULL == p_cb->p_cback) { |
| LOG(ERROR) << __func__ << ": p_cb=" << p_cb |
| << ", p_cb->p_cback=" << (p_cb ? p_cb->p_cback : 0); |
| return; |
| } |
| uint32_t rfcomm_slot_id = p_pcb->rfcomm_slot_id; |
| VLOG(2) << __func__ << ": code=" << code |
| << ", port_handle=" << loghex(port_handle) |
| << ", handle=" << loghex(p_cb->handle) << ", p_pcb" << p_pcb |
| << ", user=" << p_pcb->rfcomm_slot_id; |
| |
| PORT_CheckConnection(port_handle, rem_bda, &lcid); |
| int failed = true; |
| if (code == PORT_SUCCESS) { |
| evt_data.rfc_srv_open.handle = p_pcb->handle; |
| evt_data.rfc_srv_open.status = BTA_JV_SUCCESS; |
| evt_data.rfc_srv_open.rem_bda = rem_bda; |
| tBTA_JV_PCB* p_pcb_new_listen = bta_jv_add_rfc_port(p_cb, p_pcb); |
| if (p_pcb_new_listen) { |
| evt_data.rfc_srv_open.new_listen_handle = p_pcb_new_listen->handle; |
| p_pcb_new_listen->rfcomm_slot_id = |
| p_cb->p_cback(BTA_JV_RFCOMM_SRV_OPEN_EVT, &evt_data, rfcomm_slot_id); |
| VLOG(2) << __func__ << ": curr_sess=" << p_cb->curr_sess |
| << ", max_sess=" << p_cb->max_sess; |
| failed = false; |
| } else |
| LOG(ERROR) << __func__ << ": failed to create new listen port"; |
| } |
| if (failed) { |
| evt_data.rfc_close.handle = p_cb->handle; |
| evt_data.rfc_close.status = BTA_JV_FAILURE; |
| evt_data.rfc_close.async = true; |
| evt_data.rfc_close.port_status = code; |
| p_pcb->cong = false; |
| |
| tBTA_JV_RFCOMM_CBACK* p_cback = p_cb->p_cback; |
| VLOG(2) << __func__ |
| << ": PORT_CLOSED before BTA_JV_RFCOMM_CLOSE_EVT: curr_sess=" |
| << p_cb->curr_sess << ", max_sess=" << p_cb->max_sess; |
| if (BTA_JV_ST_SR_CLOSING == p_pcb->state) { |
| evt_data.rfc_close.async = false; |
| evt_data.rfc_close.status = BTA_JV_SUCCESS; |
| } |
| // p_pcb->state = BTA_JV_ST_NONE; |
| p_cback(BTA_JV_RFCOMM_CLOSE_EVT, &evt_data, rfcomm_slot_id); |
| // bta_jv_free_rfc_cb(p_cb, p_pcb); |
| |
| VLOG(2) << __func__ |
| << ": PORT_CLOSED after BTA_JV_RFCOMM_CLOSE_EVT: curr_sess=" |
| << p_cb->curr_sess << ", max_sess=" << p_cb->max_sess; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_port_event_sr_cback |
| * |
| * Description Callback for RFCOMM server port events |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_jv_port_event_sr_cback(uint32_t code, uint16_t port_handle) { |
| tBTA_JV_PCB* p_pcb = bta_jv_rfc_port_to_pcb(port_handle); |
| tBTA_JV_RFC_CB* p_cb = bta_jv_rfc_port_to_cb(port_handle); |
| tBTA_JV evt_data; |
| |
| if (NULL == p_cb || NULL == p_cb->p_cback) return; |
| |
| VLOG(2) << __func__ << ": code=" << loghex(code) |
| << ", port_handle=" << port_handle << ", handle=" << p_cb->handle; |
| |
| uint32_t user_data = p_pcb->rfcomm_slot_id; |
| if (code & PORT_EV_RXCHAR) { |
| evt_data.data_ind.handle = p_cb->handle; |
| p_cb->p_cback(BTA_JV_RFCOMM_DATA_IND_EVT, &evt_data, user_data); |
| } |
| |
| if (code & PORT_EV_FC) { |
| p_pcb->cong = (code & PORT_EV_FCS) ? false : true; |
| evt_data.rfc_cong.cong = p_pcb->cong; |
| evt_data.rfc_cong.handle = p_cb->handle; |
| evt_data.rfc_cong.status = BTA_JV_SUCCESS; |
| p_cb->p_cback(BTA_JV_RFCOMM_CONG_EVT, &evt_data, user_data); |
| } |
| |
| if (code & PORT_EV_TXEMPTY) { |
| bta_jv_pm_conn_idle(p_pcb->p_pm_cb); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_add_rfc_port |
| * |
| * Description add a port for server when the existing posts is open |
| * |
| * Returns return a pointer to tBTA_JV_PCB just added |
| * |
| ******************************************************************************/ |
| static tBTA_JV_PCB* bta_jv_add_rfc_port(tBTA_JV_RFC_CB* p_cb, |
| tBTA_JV_PCB* p_pcb_open) { |
| uint8_t used = 0, i, listen = 0; |
| uint32_t si = 0; |
| tPORT_STATE port_state; |
| uint32_t event_mask = BTA_JV_RFC_EV_MASK; |
| tBTA_JV_PCB* p_pcb = NULL; |
| if (p_cb->max_sess > 1) { |
| for (i = 0; i < p_cb->max_sess; i++) { |
| if (p_cb->rfc_hdl[i] != 0) { |
| p_pcb = &bta_jv_cb.port_cb[p_cb->rfc_hdl[i] - 1]; |
| if (p_pcb->state == BTA_JV_ST_SR_LISTEN) { |
| listen++; |
| if (p_pcb_open == p_pcb) { |
| VLOG(2) << __func__ << ": port_handle=" << p_pcb->port_handle |
| << ", change the listen port to open state"; |
| p_pcb->state = BTA_JV_ST_SR_OPEN; |
| |
| } else { |
| LOG(ERROR) << __func__ |
| << ": open pcb not matching listen one, count=" << listen |
| << ", listen pcb handle=" << p_pcb->port_handle |
| << ", open pcb=" << p_pcb_open->handle; |
| return NULL; |
| } |
| } |
| used++; |
| } else if (si == 0) { |
| si = i + 1; |
| } |
| } |
| |
| VLOG(2) << __func__ << ": max_sess=" << p_cb->max_sess << ", used=" << used |
| << ", curr_sess=" << p_cb->curr_sess << ", listen=" << listen |
| << ", si=" << si; |
| if (used < p_cb->max_sess && listen == 1 && si) { |
| si--; |
| if (RFCOMM_CreateConnection(p_cb->sec_id, p_cb->scn, true, |
| BTA_JV_DEF_RFC_MTU, RawAddress::kAny, |
| &(p_cb->rfc_hdl[si]), |
| bta_jv_port_mgmt_sr_cback) == PORT_SUCCESS) { |
| p_cb->curr_sess++; |
| p_pcb = &bta_jv_cb.port_cb[p_cb->rfc_hdl[si] - 1]; |
| p_pcb->state = BTA_JV_ST_SR_LISTEN; |
| p_pcb->port_handle = p_cb->rfc_hdl[si]; |
| p_pcb->rfcomm_slot_id = p_pcb_open->rfcomm_slot_id; |
| |
| PORT_ClearKeepHandleFlag(p_pcb->port_handle); |
| PORT_SetEventCallback(p_pcb->port_handle, bta_jv_port_event_sr_cback); |
| PORT_SetDataCOCallback(p_pcb->port_handle, bta_jv_port_data_co_cback); |
| PORT_SetEventMask(p_pcb->port_handle, event_mask); |
| PORT_GetState(p_pcb->port_handle, &port_state); |
| |
| port_state.fc_type = (PORT_FC_CTS_ON_INPUT | PORT_FC_CTS_ON_OUTPUT); |
| |
| PORT_SetState(p_pcb->port_handle, &port_state); |
| p_pcb->handle = BTA_JV_RFC_H_S_TO_HDL(p_cb->handle, si); |
| VLOG(2) << __func__ << ": p_pcb->handle=" << loghex(p_pcb->handle) |
| << ", curr_sess=" << p_cb->curr_sess; |
| } |
| } else { |
| LOG(ERROR) << __func__ << ": cannot create new rfc listen port"; |
| return NULL; |
| } |
| } |
| VLOG(2) << __func__ << ": sec id in use=" << get_sec_id_used() |
| << ", rfc_cb in use=" << get_rfc_cb_used(); |
| return p_pcb; |
| } |
| |
| /* waits for an RFCOMM client to connect */ |
| void bta_jv_rfcomm_start_server(tBTA_SEC sec_mask, tBTA_JV_ROLE role, |
| uint8_t local_scn, uint8_t max_session, |
| tBTA_JV_RFCOMM_CBACK* p_cback, |
| uint32_t rfcomm_slot_id) { |
| uint16_t handle = 0; |
| uint32_t event_mask = BTA_JV_RFC_EV_MASK; |
| tPORT_STATE port_state; |
| uint8_t sec_id = 0; |
| tBTA_JV_RFC_CB* p_cb = NULL; |
| tBTA_JV_PCB* p_pcb; |
| tBTA_JV_RFCOMM_START evt_data; |
| |
| /* TODO DM role manager |
| L2CA_SetDesireRole(role); |
| */ |
| memset(&evt_data, 0, sizeof(evt_data)); |
| evt_data.status = BTA_JV_FAILURE; |
| VLOG(2) << __func__ << ": sec id in use=" << get_sec_id_used() |
| << ", rfc_cb in use=" << get_rfc_cb_used(); |
| |
| do { |
| sec_id = bta_jv_alloc_sec_id(); |
| |
| if (0 == sec_id || |
| !BTM_SetSecurityLevel(false, "JV PORT", sec_id, sec_mask, BT_PSM_RFCOMM, |
| BTM_SEC_PROTO_RFCOMM, local_scn)) { |
| LOG(ERROR) << __func__ << ": run out of sec_id"; |
| break; |
| } |
| |
| if (RFCOMM_CreateConnection(sec_id, local_scn, true, BTA_JV_DEF_RFC_MTU, |
| RawAddress::kAny, &handle, |
| bta_jv_port_mgmt_sr_cback) != PORT_SUCCESS) { |
| LOG(ERROR) << __func__ << ": RFCOMM_CreateConnection failed"; |
| break; |
| } |
| |
| p_cb = bta_jv_alloc_rfc_cb(handle, &p_pcb); |
| if (!p_cb) { |
| LOG(ERROR) << __func__ << ": run out of rfc control block"; |
| break; |
| } |
| |
| p_cb->max_sess = max_session; |
| p_cb->p_cback = p_cback; |
| p_cb->sec_id = sec_id; |
| p_cb->scn = local_scn; |
| p_pcb->state = BTA_JV_ST_SR_LISTEN; |
| p_pcb->rfcomm_slot_id = rfcomm_slot_id; |
| evt_data.status = BTA_JV_SUCCESS; |
| evt_data.handle = p_cb->handle; |
| evt_data.sec_id = sec_id; |
| evt_data.use_co = true; |
| |
| PORT_ClearKeepHandleFlag(handle); |
| PORT_SetEventCallback(handle, bta_jv_port_event_sr_cback); |
| PORT_SetEventMask(handle, event_mask); |
| PORT_GetState(handle, &port_state); |
| |
| port_state.fc_type = (PORT_FC_CTS_ON_INPUT | PORT_FC_CTS_ON_OUTPUT); |
| |
| PORT_SetState(handle, &port_state); |
| } while (0); |
| |
| tBTA_JV bta_jv; |
| bta_jv.rfc_start = evt_data; |
| p_cback(BTA_JV_RFCOMM_START_EVT, &bta_jv, rfcomm_slot_id); |
| if (bta_jv.rfc_start.status == BTA_JV_SUCCESS) { |
| PORT_SetDataCOCallback(handle, bta_jv_port_data_co_cback); |
| } else { |
| if (sec_id) bta_jv_free_sec_id(&sec_id); |
| if (handle) RFCOMM_RemoveConnection(handle); |
| } |
| } |
| |
| /* stops an RFCOMM server */ |
| void bta_jv_rfcomm_stop_server(uint32_t handle, uint32_t rfcomm_slot_id) { |
| if (!handle) { |
| LOG(ERROR) << __func__ << ": jv handle is null"; |
| return; |
| } |
| |
| VLOG(2) << __func__; |
| tBTA_JV_RFC_CB* p_cb = NULL; |
| tBTA_JV_PCB* p_pcb = NULL; |
| |
| if (!find_rfc_pcb(rfcomm_slot_id, &p_cb, &p_pcb)) return; |
| VLOG(2) << __func__ << ": p_pcb=" << p_pcb |
| << ", p_pcb->port_handle=" << p_pcb->port_handle; |
| bta_jv_free_rfc_cb(p_cb, p_pcb); |
| VLOG(2) << __func__ << ": sec id in use=" << get_sec_id_used() |
| << ", rfc_cb in use=" << get_rfc_cb_used(); |
| } |
| |
| /* write data to an RFCOMM connection */ |
| void bta_jv_rfcomm_write(uint32_t handle, uint32_t req_id, tBTA_JV_RFC_CB* p_cb, |
| tBTA_JV_PCB* p_pcb) { |
| if (p_pcb->state == BTA_JV_ST_NONE) { |
| LOG(ERROR) << __func__ << ": in state BTA_JV_ST_NONE - cannot write"; |
| return; |
| } |
| |
| tBTA_JV_RFCOMM_WRITE evt_data; |
| evt_data.status = BTA_JV_FAILURE; |
| evt_data.handle = handle; |
| evt_data.req_id = req_id; |
| evt_data.cong = p_pcb->cong; |
| evt_data.len = 0; |
| |
| bta_jv_pm_conn_busy(p_pcb->p_pm_cb); |
| |
| if (!evt_data.cong && |
| PORT_WriteDataCO(p_pcb->port_handle, &evt_data.len) == PORT_SUCCESS) { |
| evt_data.status = BTA_JV_SUCCESS; |
| } |
| |
| // Update congestion flag |
| evt_data.cong = p_pcb->cong; |
| |
| if (!p_cb->p_cback) { |
| LOG(ERROR) << __func__ << ": No JV callback set"; |
| return; |
| } |
| |
| tBTA_JV bta_jv; |
| bta_jv.rfc_write = evt_data; |
| p_cb->p_cback(BTA_JV_RFCOMM_WRITE_EVT, &bta_jv, p_pcb->rfcomm_slot_id); |
| } |
| |
| /* Set or free power mode profile for a JV application */ |
| void bta_jv_set_pm_profile(uint32_t handle, tBTA_JV_PM_ID app_id, |
| tBTA_JV_CONN_STATE init_st) { |
| tBTA_JV_STATUS status; |
| tBTA_JV_PM_CB* p_cb; |
| |
| VLOG(2) << __func__ << " handle=" << loghex(handle) << ", app_id=" << app_id |
| << ", init_st=" << +init_st; |
| |
| /* clear PM control block */ |
| if (app_id == BTA_JV_PM_ID_CLEAR) { |
| status = bta_jv_free_set_pm_profile_cb(handle); |
| |
| if (status != BTA_JV_SUCCESS) { |
| LOG(WARNING) << __func__ << ": free pm cb failed: reason=" << +status; |
| } |
| } else /* set PM control block */ |
| { |
| p_cb = bta_jv_alloc_set_pm_profile_cb(handle, app_id); |
| |
| if (NULL != p_cb) |
| bta_jv_pm_state_change(p_cb, init_st); |
| else |
| LOG(WARNING) << __func__ << ": failed"; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_pm_conn_busy |
| * |
| * Description set pm connection busy state (input param safe) |
| * |
| * Params p_cb: pm control block of jv connection |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_jv_pm_conn_busy(tBTA_JV_PM_CB* p_cb) { |
| if ((NULL != p_cb) && (BTA_JV_PM_IDLE_ST == p_cb->state)) |
| bta_jv_pm_state_change(p_cb, BTA_JV_CONN_BUSY); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_pm_conn_busy |
| * |
| * Description set pm connection busy state (input param safe) |
| * |
| * Params p_cb: pm control block of jv connection |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_jv_pm_conn_idle(tBTA_JV_PM_CB* p_cb) { |
| if ((NULL != p_cb) && (BTA_JV_PM_IDLE_ST != p_cb->state)) |
| bta_jv_pm_state_change(p_cb, BTA_JV_CONN_IDLE); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function bta_jv_pm_state_change |
| * |
| * Description Notify power manager there is state change |
| * |
| * Params p_cb: must be NONE NULL |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void bta_jv_pm_state_change(tBTA_JV_PM_CB* p_cb, |
| const tBTA_JV_CONN_STATE state) { |
| VLOG(2) << __func__ << ": p_cb=" << p_cb |
| << ", handle=" << loghex(p_cb->handle) |
| << ", busy/idle_state=" << p_cb->state << ", app_id=" << p_cb->app_id |
| << ", conn_state=" << state; |
| |
| switch (state) { |
| case BTA_JV_CONN_OPEN: |
| bta_sys_conn_open(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); |
| break; |
| |
| case BTA_JV_CONN_CLOSE: |
| bta_sys_conn_close(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); |
| break; |
| |
| case BTA_JV_APP_OPEN: |
| bta_sys_app_open(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); |
| break; |
| |
| case BTA_JV_APP_CLOSE: |
| bta_sys_app_close(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); |
| break; |
| |
| case BTA_JV_SCO_OPEN: |
| bta_sys_sco_open(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); |
| break; |
| |
| case BTA_JV_SCO_CLOSE: |
| bta_sys_sco_close(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); |
| break; |
| |
| case BTA_JV_CONN_IDLE: |
| p_cb->state = BTA_JV_PM_IDLE_ST; |
| bta_sys_idle(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); |
| break; |
| |
| case BTA_JV_CONN_BUSY: |
| p_cb->state = BTA_JV_PM_BUSY_ST; |
| bta_sys_busy(BTA_ID_JV, p_cb->app_id, p_cb->peer_bd_addr); |
| break; |
| |
| default: |
| LOG(WARNING) << __func__ << ": Invalid state=" << +state; |
| break; |
| } |
| } |
| /******************************************************************************/ |
| |
| static struct fc_channel* fcchan_get(uint16_t chan, char create) { |
| struct fc_channel* t = fc_channels; |
| static tL2CAP_FIXED_CHNL_REG fcr = { |
| .pL2CA_FixedConn_Cb = fcchan_conn_chng_cbk, |
| .pL2CA_FixedData_Cb = fcchan_data_cbk, |
| .default_idle_tout = 0xffff, |
| .fixed_chnl_opts = |
| { |
| .mode = L2CAP_FCR_BASIC_MODE, |
| .max_transmit = 0xFF, |
| .rtrans_tout = 2000, |
| .mon_tout = 12000, |
| .mps = 670, |
| .tx_win_sz = 1, |
| }, |
| }; |
| |
| while (t && t->chan != chan) t = t->next; |
| |
| if (t) |
| return t; |
| else if (!create) |
| return NULL; /* we cannot alloc a struct if not asked to */ |
| |
| t = static_cast<struct fc_channel*>(osi_calloc(sizeof(*t))); |
| t->chan = chan; |
| |
| if (!L2CA_RegisterFixedChannel(chan, &fcr)) { |
| osi_free(t); |
| return NULL; |
| } |
| |
| // link it in |
| t->next = fc_channels; |
| fc_channels = t; |
| |
| return t; |
| } |
| |
| /* pass NULL to find servers */ |
| static struct fc_client* fcclient_find_by_addr(struct fc_client* start, |
| const RawAddress* addr) { |
| struct fc_client* t = start; |
| |
| while (t) { |
| /* match client if have addr */ |
| if (addr && addr == &t->remote_addr) break; |
| |
| /* match server if do not have addr */ |
| if (!addr && t->server) break; |
| |
| t = t->next_all_list; |
| } |
| |
| return t; |
| } |
| |
| static struct fc_client* fcclient_find_by_id(uint32_t id) { |
| struct fc_client* t = fc_clients; |
| |
| while (t && t->id != id) t = t->next_all_list; |
| |
| return t; |
| } |
| |
| static struct fc_client* fcclient_alloc(uint16_t chan, char server, |
| const uint8_t* sec_id_to_use) { |
| struct fc_channel* fc = fcchan_get(chan, true); |
| struct fc_client* t; |
| uint8_t sec_id; |
| |
| if (!fc) return NULL; |
| |
| if (fc->has_server && server) |
| return NULL; /* no way to have multiple servers on same channel */ |
| |
| if (sec_id_to_use) |
| sec_id = *sec_id_to_use; |
| else |
| sec_id = bta_jv_alloc_sec_id(); |
| |
| t = static_cast<fc_client*>(osi_calloc(sizeof(*t))); |
| // Allocate it a unique ID |
| do { |
| t->id = ++fc_next_id; |
| } while (!t->id || fcclient_find_by_id(t->id)); |
| |
| // Populate some params |
| t->chan = chan; |
| t->server = server; |
| |
| // Get a security id |
| t->sec_id = sec_id; |
| |
| // Link it in to global list |
| t->next_all_list = fc_clients; |
| fc_clients = t; |
| |
| // Link it in to channel list |
| t->next_chan_list = fc->clients; |
| fc->clients = t; |
| |
| // Update channel if needed |
| if (server) fc->has_server = true; |
| |
| return t; |
| } |
| |
| static void fcclient_free(struct fc_client* fc) { |
| struct fc_client* t = fc_clients; |
| struct fc_channel* tc = fcchan_get(fc->chan, false); |
| |
| // remove from global list |
| while (t && t->next_all_list != fc) t = t->next_all_list; |
| |
| if (!t && fc != fc_clients) return; /* prevent double-free */ |
| |
| if (t) |
| t->next_all_list = fc->next_all_list; |
| else |
| fc_clients = fc->next_all_list; |
| |
| // remove from channel list |
| if (tc) { |
| t = tc->clients; |
| |
| while (t && t->next_chan_list != fc) t = t->next_chan_list; |
| |
| if (t) |
| t->next_chan_list = fc->next_chan_list; |
| else |
| tc->clients = fc->next_chan_list; |
| |
| // if was server then channel no longer has a server |
| if (fc->server) tc->has_server = false; |
| } |
| |
| // free security id |
| bta_jv_free_sec_id(&fc->sec_id); |
| |
| osi_free(fc); |
| } |
| |
| static void fcchan_conn_chng_cbk(uint16_t chan, const RawAddress& bd_addr, |
| bool connected, uint16_t reason, |
| tBT_TRANSPORT transport) { |
| tBTA_JV init_evt; |
| tBTA_JV open_evt; |
| struct fc_channel* tc; |
| struct fc_client *t = NULL, *new_conn; |
| tBTA_JV_L2CAP_CBACK* p_cback = NULL; |
| char call_init = false; |
| uint32_t l2cap_socket_id; |
| |
| tc = fcchan_get(chan, false); |
| if (tc) { |
| t = fcclient_find_by_addr( |
| tc->clients, |
| &bd_addr); // try to find an open socked for that addr |
| if (t) { |
| p_cback = t->p_cback; |
| l2cap_socket_id = t->l2cap_socket_id; |
| } else { |
| t = fcclient_find_by_addr( |
| tc->clients, |
| NULL); // try to find a listening socked for that channel |
| if (t) { |
| // found: create a normal connection socket and assign the connection to |
| // it |
| new_conn = fcclient_alloc(chan, false, &t->sec_id); |
| if (new_conn) { |
| new_conn->remote_addr = bd_addr; |
| new_conn->p_cback = NULL; // for now |
| new_conn->init_called = true; /*nop need to do it again */ |
| |
| p_cback = t->p_cback; |
| l2cap_socket_id = t->l2cap_socket_id; |
| |
| t = new_conn; |
| } |
| } else { |
| // drop it |
| return; |
| } |
| } |
| } |
| |
| if (t) { |
| if (!t->init_called) { |
| call_init = true; |
| t->init_called = true; |
| |
| init_evt.l2c_cl_init.handle = t->id; |
| init_evt.l2c_cl_init.status = BTA_JV_SUCCESS; |
| init_evt.l2c_cl_init.sec_id = t->sec_id; |
| } |
| |
| open_evt.l2c_open.handle = t->id; |
| open_evt.l2c_open.tx_mtu = 23; /* 23, why not ?*/ |
| memcpy(&open_evt.l2c_le_open.rem_bda, &t->remote_addr, |
| sizeof(open_evt.l2c_le_open.rem_bda)); |
| // TODO: (apanicke) Change the way these functions work so that casting |
| // isn't needed |
| open_evt.l2c_le_open.p_p_cback = (void**)&t->p_cback; |
| open_evt.l2c_le_open.p_user_data = (void**)&t->l2cap_socket_id; |
| open_evt.l2c_le_open.status = BTA_JV_SUCCESS; |
| |
| if (connected) { |
| open_evt.l2c_open.status = BTA_JV_SUCCESS; |
| } else { |
| fcclient_free(t); |
| open_evt.l2c_open.status = BTA_JV_FAILURE; |
| } |
| } |
| |
| if (call_init) p_cback(BTA_JV_L2CAP_CL_INIT_EVT, &init_evt, l2cap_socket_id); |
| |
| // call this with lock taken so socket does not disappear from under us */ |
| if (p_cback) { |
| p_cback(BTA_JV_L2CAP_OPEN_EVT, &open_evt, l2cap_socket_id); |
| if (!t->p_cback) /* no callback set, means they do not want this one... */ |
| fcclient_free(t); |
| } |
| } |
| |
| static void fcchan_data_cbk(uint16_t chan, const RawAddress& bd_addr, |
| BT_HDR* p_buf) { |
| tBTA_JV evt_data; |
| struct fc_channel* tc; |
| struct fc_client* t = NULL; |
| tBTA_JV_L2CAP_CBACK* sock_cback = NULL; |
| uint32_t sock_id; |
| |
| tc = fcchan_get(chan, false); |
| if (tc) { |
| // try to find an open socked for that addr and channel |
| t = fcclient_find_by_addr(tc->clients, &bd_addr); |
| if (!t) { |
| // no socket -> drop it |
| return; |
| } |
| } |
| |
| sock_cback = t->p_cback; |
| sock_id = t->l2cap_socket_id; |
| evt_data.le_data_ind.handle = t->id; |
| evt_data.le_data_ind.p_buf = p_buf; |
| |
| if (sock_cback) sock_cback(BTA_JV_L2CAP_DATA_IND_EVT, &evt_data, sock_id); |
| } |
| |
| /** makes an le l2cap client connection */ |
| void bta_jv_l2cap_connect_le(uint16_t remote_chan, |
| const RawAddress& peer_bd_addr, |
| tBTA_JV_L2CAP_CBACK* p_cback, |
| uint32_t l2cap_socket_id) { |
| tBTA_JV evt; |
| uint32_t id; |
| char call_init_f = true; |
| struct fc_client* t; |
| |
| evt.l2c_cl_init.handle = GAP_INVALID_HANDLE; |
| evt.l2c_cl_init.status = BTA_JV_FAILURE; |
| |
| t = fcclient_alloc(remote_chan, false, NULL); |
| if (!t) { |
| p_cback(BTA_JV_L2CAP_CL_INIT_EVT, &evt, l2cap_socket_id); |
| return; |
| } |
| |
| t->p_cback = p_cback; |
| t->l2cap_socket_id = l2cap_socket_id; |
| t->remote_addr = peer_bd_addr; |
| id = t->id; |
| t->init_called = false; |
| |
| if (L2CA_ConnectFixedChnl(t->chan, t->remote_addr)) { |
| evt.l2c_cl_init.status = BTA_JV_SUCCESS; |
| evt.l2c_cl_init.handle = id; |
| } |
| |
| // it could have been deleted/moved from under us, so re-find it */ |
| t = fcclient_find_by_id(id); |
| if (t) { |
| if (evt.l2c_cl_init.status == BTA_JV_SUCCESS) |
| call_init_f = !t->init_called; |
| else |
| fcclient_free(t); |
| } |
| if (call_init_f) p_cback(BTA_JV_L2CAP_CL_INIT_EVT, &evt, l2cap_socket_id); |
| t->init_called = true; |
| } |
| |
| /* stops an LE L2CAP server */ |
| void bta_jv_l2cap_stop_server_le(uint16_t local_chan) { |
| struct fc_client* fcclient; |
| |
| tBTA_JV evt; |
| evt.l2c_close.status = BTA_JV_FAILURE; |
| evt.l2c_close.async = false; |
| evt.l2c_close.handle = GAP_INVALID_HANDLE; |
| |
| struct fc_channel* fcchan = fcchan_get(local_chan, false); |
| if (fcchan) { |
| while ((fcclient = fcchan->clients)) { |
| tBTA_JV_L2CAP_CBACK* p_cback = fcclient->p_cback; |
| uint32_t l2cap_socket_id = fcclient->l2cap_socket_id; |
| |
| evt.l2c_close.handle = fcclient->id; |
| evt.l2c_close.status = BTA_JV_SUCCESS; |
| evt.l2c_close.async = false; |
| |
| fcclient_free(fcclient); |
| |
| if (p_cback) p_cback(BTA_JV_L2CAP_CLOSE_EVT, &evt, l2cap_socket_id); |
| } |
| } |
| } |
| |
| /** starts an LE L2CAP server */ |
| void bta_jv_l2cap_start_server_le(uint16_t local_chan, |
| tBTA_JV_L2CAP_CBACK* p_cback, |
| uint32_t l2cap_socket_id) { |
| tBTA_JV_L2CAP_START evt_data; |
| evt_data.handle = GAP_INVALID_HANDLE; |
| evt_data.status = BTA_JV_FAILURE; |
| |
| struct fc_client* t = fcclient_alloc(local_chan, true, NULL); |
| if (!t) goto out; |
| |
| t->p_cback = p_cback; |
| t->l2cap_socket_id = l2cap_socket_id; |
| |
| // if we got here, we're registered... |
| evt_data.status = BTA_JV_SUCCESS; |
| evt_data.handle = t->id; |
| evt_data.sec_id = t->sec_id; |
| |
| out: |
| tBTA_JV bta_jv; |
| bta_jv.l2c_start = evt_data; |
| p_cback(BTA_JV_L2CAP_START_EVT, &bta_jv, l2cap_socket_id); |
| } |
| |
| /* close a fixed channel connection. calls no callbacks. idempotent */ |
| extern void bta_jv_l2cap_close_fixed(uint32_t handle) { |
| struct fc_client* t = fcclient_find_by_id(handle); |
| if (t) fcclient_free(t); |
| } |