/******************************************************************************
 *
 *  Copyright (c) 2014 The Android Open Source Project
 *  Copyright (C) 2009-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

#ifndef BTIF_COMMON_H
#define BTIF_COMMON_H

#include <stdlib.h>

#include <base/bind.h>
#include <base/tracked_objects.h>
#include <hardware/bluetooth.h>

#include "bt_types.h"
#include "bta_api.h"
#include "osi/include/log.h"
#include "osi/include/osi.h"

/*******************************************************************************
 *  Constants & Macros
 ******************************************************************************/

#define ASSERTC(cond, msg, val)                                              \
  do {                                                                       \
    if (!(cond)) {                                                           \
      LOG_ERROR(LOG_TAG, "### ASSERT : %s %s line %d %s (%d) ###", __FILE__, \
                __func__, __LINE__, (msg), (val));                           \
    }                                                                        \
  } while (0)

/* Calculate start of event enumeration; id is top 8 bits of event */
#define BTIF_SIG_START(id) ((id) << 8)

/* For upstream the MSB bit is always SET */
#define BTIF_SIG_CB_BIT (0x8000)
#define BTIF_SIG_CB_START(id) (((id) << 8) | BTIF_SIG_CB_BIT)

/*
 * A memcpy(3) wrapper when copying memory that might not be aligned.
 *
 * On certain architectures, if the memcpy(3) arguments appear to be
 * pointing to aligned memory (e.g., struct pointers), the compiler might
 * generate optimized memcpy(3) code. However, if the original memory was not
 * aligned (e.g., because of incorrect "char *" to struct pointer casting),
 * the result code might trigger SIGBUS crash.
 *
 * As a short-term solution, we use the help of the maybe_non_aligned_memcpy()
 * macro to identify and fix such cases. In the future, we should fix the
 * problematic "char *" to struct pointer casting, and this macro itself should
 * be removed.
 */
#define maybe_non_aligned_memcpy(_a, _b, _c) \
  memcpy((void*)(_a), (void*)(_b), (_c))

/* BTIF sub-systems */
#define BTIF_CORE 0
#define BTIF_DM 1
#define BTIF_HFP 2
#define BTIF_AV 3
#define BTIF_PAN 4
#define BTIF_HF_CLIENT 5

extern bt_callbacks_t* bt_hal_cbacks;

#define HAL_CBACK(P_CB, P_CBACK, ...)                \
  do {                                               \
    if ((P_CB) && (P_CB)->P_CBACK) {                 \
      BTIF_TRACE_API("HAL %s->%s", #P_CB, #P_CBACK); \
      (P_CB)->P_CBACK(__VA_ARGS__);                  \
    } else {                                         \
      ASSERTC(0, "Callback is NULL", 0);             \
    }                                                \
  } while (0)

/**
 * BTIF events for requests that require context switch to btif task
 * on downstreams path
 */
enum {
  BTIF_CORE_API_START = BTIF_SIG_START(BTIF_CORE),
  BTIF_CORE_STORAGE_NO_ACTION,
  BTIF_CORE_STORAGE_ADAPTER_WRITE,
  BTIF_CORE_STORAGE_ADAPTER_READ,
  BTIF_CORE_STORAGE_ADAPTER_READ_ALL,
  BTIF_CORE_STORAGE_REMOTE_WRITE,
  BTIF_CORE_STORAGE_REMOTE_READ,
  BTIF_CORE_STORAGE_REMOTE_READ_ALL,
  BTIF_CORE_STORAGE_READ_ALL,
  BTIF_CORE_STORAGE_NOTIFY_STATUS,
  /* add here */

  BTIF_DM_API_START = BTIF_SIG_START(BTIF_DM),
  BTIF_DM_ENABLE_SERVICE,
  BTIF_DM_DISABLE_SERVICE,
  /* add here */

  BTIF_HFP_API_START = BTIF_SIG_START(BTIF_HFP),
  /* add here */

  BTIF_AV_API_START = BTIF_SIG_START(BTIF_AV),
  /* add here */
};

/**
 * BTIF events for callbacks that require context switch to btif task
 * on upstream path - Typically these would be non-BTA events
 * that are generated by the BTIF layer.
 */
enum {
  BTIF_CORE_CB_START = BTIF_SIG_CB_START(BTIF_CORE),
  /* add here */

  BTIF_DM_CB_START = BTIF_SIG_CB_START(BTIF_DM),
  BTIF_DM_CB_DISCOVERY_STARTED, /* Discovery has started */
  BTIF_DM_CB_CREATE_BOND,       /* Create bond */
  BTIF_DM_CB_REMOVE_BOND,       /*Remove bond */
  BTIF_DM_CB_HID_REMOTE_NAME,   /* Remote name callback for HID device */
  BTIF_DM_CB_BOND_STATE_BONDING,
  BTIF_DM_CB_LE_TX_TEST,  /* BLE Tx Test command complete callback */
  BTIF_DM_CB_LE_RX_TEST,  /* BLE Rx Test command complete callback */
  BTIF_DM_CB_LE_TEST_END, /* BLE Test mode end callback */

  BTIF_HFP_CB_START = BTIF_SIG_CB_START(BTIF_HFP),
  BTIF_HFP_CB_AUDIO_CONNECTING, /* HF AUDIO connect has been sent to BTA
                                   successfully */

  BTIF_PAN_CB_START = BTIF_SIG_CB_START(BTIF_PAN),
  BTIF_PAN_CB_DISCONNECTING, /* PAN Disconnect has been sent to BTA successfully
                                */

  BTIF_HF_CLIENT_CLIENT_CB_START = BTIF_SIG_CB_START(BTIF_HF_CLIENT),
  BTIF_HF_CLIENT_CB_AUDIO_CONNECTING, /* AUDIO connect has been sent to BTA
                                         successfully */
};

/*******************************************************************************
 *  Type definitions for callback functions
 ******************************************************************************/

typedef void(tBTIF_CBACK)(uint16_t event, char* p_param);
typedef void(tBTIF_COPY_CBACK)(uint16_t event, char* p_dest, char* p_src);

/*******************************************************************************
 *  Type definitions and return values
 ******************************************************************************/

/* this type handles all btif context switches between BTU and HAL */
typedef struct {
  BT_HDR hdr;
  tBTIF_CBACK* p_cb; /* context switch callback */

  /* parameters passed to callback */
  uint16_t event;                          /* message event id */
  char __attribute__((aligned)) p_param[]; /* parameter area needs to be last */
} tBTIF_CONTEXT_SWITCH_CBACK;

/*******************************************************************************
 *  Functions
 ******************************************************************************/

extern bt_status_t do_in_jni_thread(const base::Closure& task);
extern bt_status_t do_in_jni_thread(const tracked_objects::Location& from_here,
                                    const base::Closure& task);
/**
 * This template wraps callback into callback that will be executed on jni
 * thread
 */
template <typename R, typename... Args>
base::Callback<R(Args...)> jni_thread_wrapper(
    const tracked_objects::Location& from_here, base::Callback<R(Args...)> cb) {
  return base::Bind(
      [](const tracked_objects::Location& from_here,
         base::Callback<R(Args...)> cb, Args... args) {
        do_in_jni_thread(from_here,
                         base::Bind(cb, std::forward<Args>(args)...));
      },
      from_here, std::move(cb));
}

tBTA_SERVICE_MASK btif_get_enabled_services_mask(void);
bt_status_t btif_enable_service(tBTA_SERVICE_ID service_id);
bt_status_t btif_disable_service(tBTA_SERVICE_ID service_id);
int btif_is_enabled(void);

/**
 * BTIF_Events
 */
void btif_enable_bluetooth_evt(tBTA_STATUS status);
void btif_disable_bluetooth_evt(void);
void btif_adapter_properties_evt(bt_status_t status, uint32_t num_props,
                                 bt_property_t* p_props);
void btif_remote_properties_evt(bt_status_t status, RawAddress* remote_addr,
                                uint32_t num_props, bt_property_t* p_props);

void bte_load_did_conf(const char* p_path);
void bte_main_boot_entry(void);
void bte_main_enable(void);
void bte_main_disable(void);
void bte_main_cleanup(void);
void bte_main_postload_cfg(void);

bt_status_t btif_transfer_context(tBTIF_CBACK* p_cback, uint16_t event,
                                  char* p_params, int param_len,
                                  tBTIF_COPY_CBACK* p_copy_cback);

void btif_init_ok(UNUSED_ATTR uint16_t event, UNUSED_ATTR char* p_param);

#endif /* BTIF_COMMON_H */