/******************************************************************************
 *
 *  Copyright (C) 2014 The Android Open Source Project
 *  Copyright 2002 - 2004 Open Interface North America, Inc. All rights
 *                        reserved.
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/
#ifndef _OI_STATUS_H
#define _OI_STATUS_H
/**
 * @file
 * This file contains status codes for BLUEmagic 3.0 software.
 */

#include "oi_stddefs.h"

/** \addtogroup Misc Miscellaneous APIs */
/**@{*/

#ifdef __cplusplus
extern "C" {
#endif

/** test it **/

/**
 * OI_STATUS is 16 bits, so status codes can range from 0 to 66535, inclusive.
 */

typedef enum {
  OI_STATUS_SUCCESS = 0, /**< function call succeeded alias for #OI_OK */
  OI_OK = 0, /**< function call succeeded alias for #OI_STATUS_SUCCESS */
  OI_STATUS_INVALID_PARAMETERS = 101, /**< invalid function input parameters */
  OI_STATUS_NOT_IMPLEMENTED =
      102, /**< attempt to use an unimplemented function */
  OI_STATUS_NOT_INITIALIZED = 103, /**< data not initialized */
  OI_STATUS_NO_RESOURCES =
      104, /**< generic resource allocation failure status */
  OI_STATUS_INTERNAL_ERROR = 105, /**< internal inconsistency */
  OI_STATUS_OUT_OF_MEMORY = 106,  /**< generally, OI_Malloc failed */
  OI_ILLEGAL_REENTRANT_CALL =
      107, /**< violation of non-reentrant module policy */
  OI_STATUS_INITIALIZATION_FAILED = 108, /**< module initialization failed */
  OI_STATUS_INITIALIZATION_PENDING =
      109, /**< inititialization not yet complete */
  OI_STATUS_NO_SCO_SUPPORT =
      110, /**< SCO operation rejected; system not configured for SCO */
  OI_STATUS_OUT_OF_STATIC_MEMORY = 111, /**< static malloc failed */
  OI_TIMEOUT = 112,                     /**< generic timeout */
  OI_OS_ERROR = 113,                    /**< some operating system error */
  OI_FAIL = 114,                        /**< generic failure */
  OI_STRING_FORMAT_ERROR = 115,    /**< error in VarString formatting string */
  OI_STATUS_PENDING = 116,         /**< The operation is pending. */
  OI_STATUS_INVALID_COMMAND = 117, /**< The command was invalid. */
  OI_BUSY_FAIL = 118,              /**< command rejected due to busy */
  OI_STATUS_ALREADY_REGISTERED =
      119, /**< The registration has already been performed. */
  OI_STATUS_NOT_FOUND = 120,      /**< The referenced resource was not found. */
  OI_STATUS_NOT_REGISTERED = 121, /**< not registered */
  OI_STATUS_NOT_CONNECTED = 122,  /**< not connected */
  OI_CALLBACK_FUNCTION_REQUIRED =
      123, /**< A callback function parameter was required. */
  OI_STATUS_MBUF_OVERFLOW =
      124, /**< There is no room to add another buffer to an mbuf. */
  OI_STATUS_MBUF_UNDERFLOW =
      125, /**< There was an attempt to pull too many bytes from an mbuf. */
  OI_STATUS_CONNECTION_EXISTS = 126, /**< connection exists */
  OI_STATUS_NOT_CONFIGURED = 127,    /**< module not configured */
  OI_LOWER_STACK_ERROR = 128, /**< An error was reported by lower stack API.
                                 This is used for embedded platforms. */
  OI_STATUS_RESET_IN_PROGRESS =
      129, /**< Request failed/rejected because we're busy resetting. */
  OI_STATUS_ACCESS_DENIED = 130, /**< Generic access denied error. */
  OI_STATUS_DATA_ERROR = 131,    /**< Generic data error. */
  OI_STATUS_INVALID_ROLE = 132,  /**< The requested role was invalid. */
  OI_STATUS_ALREADY_CONNECTED =
      133, /**< The requested connection is already established. */
  OI_STATUS_PARSE_ERROR = 134,         /**< Parse error */
  OI_STATUS_END_OF_FILE = 135,         /**< End of file */
  OI_STATUS_READ_ERROR = 136,          /**< Generic read error */
  OI_STATUS_WRITE_ERROR = 137,         /**< Generic write error */
  OI_STATUS_NEGOTIATION_FAILURE = 138, /**< Error in negotiation */
  OI_STATUS_READ_IN_PROGRESS = 139,    /**< A read is already in progress */
  OI_STATUS_ALREADY_INITIALIZED =
      140,                         /**< Initialization has already been done */
  OI_STATUS_STILL_CONNECTED = 141, /**< The service cannot be shutdown because
                                      there are still active connections. */
  OI_STATUS_MTU_EXCEEDED = 142,    /**< The packet is too big */
  OI_STATUS_LINK_TERMINATED = 143, /**< The link was terminated */
  OI_STATUS_PIN_CODE_TOO_LONG =
      144, /**< Application gave us a pin code that is too long */
  OI_STATUS_STILL_REGISTERED =
      145, /**< The service cannot be shutdown because there are still active
              registrations. */
  OI_STATUS_SPEC_VIOLATION =
      146, /**< Some application behavior contrary to BT specifications */

  OI_STATUS_PSM_ALREADY_REGISTERED =
      402, /**< L2CAP: The specified PSM has already been registered. */
  OI_STATUS_INVALID_CID = 403, /**< L2CAP: CID is invalid or no longer valid
                                  (connection terminated) */
  OI_STATUS_CID_NOT_FOUND =
      404, /**< L2CAP: CID does not represent a current connection */
  OI_STATUS_CHANNEL_NOT_FOUND =
      406, /**< L2CAP: CID does not represent a current connection */
  OI_STATUS_PSM_NOT_FOUND = 407,     /**< L2CAP: PSM not found */
  OI_STATUS_INVALID_STATE = 408,     /**< L2CAP: invalid state */
  OI_STATUS_WRITE_IN_PROGRESS = 410, /**< L2CAP: write in progress */
  OI_STATUS_INVALID_PACKET = 411,    /**< L2CAP: invalid packet */
  OI_STATUS_SEND_COMPLETE = 412,     /**< L2CAP: send is complete */
  OI_STATUS_INVALID_HANDLE = 414,    /**< L2CAP: handle is invalid */
  OI_STATUS_GROUP_FULL =
      418, /**< L2CAP: No more members can be added to the specified group. */
  OI_STATUS_DEVICE_ALREADY_IN_GROUP =
      423, /**< L2CAP: The device already exists in the group. */
  OI_STATUS_DUPLICATE_GROUP =
      425,                     /**< L2CAP: attempt to add more than one group */
  OI_STATUS_EMPTY_GROUP = 426, /**< L2CAP: group is empty */
  OI_STATUS_PACKET_NOT_FOUND = 427, /**< L2CAP: packet not found */
  OI_STATUS_BUFFER_TOO_SMALL = 428, /**< L2CAP: The buffer size is too small. */
  OI_STATUS_IDENTIFIER_NOT_FOUND = 429, /**< L2CAP: identifier not found */

  OI_L2CAP_DISCONNECT_LOWER_LAYER =
      430, /**< L2CAP: The lower level forced a disconnect. */
  OI_L2CAP_DISCONNECT_REMOTE_REQUEST =
      431, /**< L2CAP: The remote device requested a disconnect. */
  OI_L2CAP_GROUP_ADD_CONNECT_FAIL = 433, /**< L2CAP: Group add connect faiL */
  OI_L2CAP_GROUP_REMOVE_FAILURE = 434,   /**< L2CAP: Group remove failure */
  OI_L2CAP_DATA_WRITE_ERROR_LINK_TERM =
      435, /**< L2CAP: Data write error LINK_TERM */
  OI_L2CAP_DISCONNECT_LOCAL_REQUEST =
      436, /**< L2CAP: Disconnect local request */

  OI_L2CAP_CONNECT_TIMEOUT = 437,    /**< L2CAP: Connect timeout */
  OI_L2CAP_DISCONNECT_TIMEOUT = 439, /**< L2CAP: Disconnect timeout */
  OI_L2CAP_PING_TIMEOUT = 440,       /**< L2CAP: Ping timeout */
  OI_L2CAP_GET_INFO_TIMEOUT = 441,   /**< L2CAP: Get info timeout */
  OI_L2CAP_INVALID_ADDRESS = 444,    /**< L2CAP: Invalid address */
  OI_L2CAP_CMD_REJECT_RCVD =
      445, /**< L2CAP: remote sent us 'command reject' response */

  OI_L2CAP_CONNECT_BASE = 450,    /**< L2CAP: Connect base */
  OI_L2CAP_CONNECT_PENDING = 451, /**< L2CAP: Connect pending */
  OI_L2CAP_CONNECT_REFUSED_INVALID_PSM =
      452, /**< L2CAP: Connect refused invalid PSM */
  OI_L2CAP_CONNECT_REFUSED_SECURITY =
      453, /**< L2CAP: Connect refused security */
  OI_L2CAP_CONNECT_REFUSED_NO_RESOURCES =
      454, /**< L2CAP: Connect refused no resources */

  OI_L2CAP_CONFIG_BASE = 460, /**< L2CAP: Config base */
  OI_L2CAP_CONFIG_FAIL_INVALID_PARAMETERS =
      461, /**< L2CAP: Config fail invalid parameters */
  OI_L2CAP_CONFIG_FAIL_NO_REASON = 462, /**< L2CAP: Config fail no reason */
  OI_L2CAP_CONFIG_FAIL_UNKNOWN_OPTIONS =
      463, /**< L2CAP: Config fail unknown options */

  OI_L2CAP_GET_INFO_BASE = 470,          /**< L2CAP: Get info base */
  OI_L2CAP_GET_INFO_NOT_SUPPORTED = 471, /**< L2CAP: Get info not supported */
  OI_L2CAP_MTU_EXCEEDED =
      472,                    /**< L2CAP: The MTU of the channel was exceeded */
  OI_L2CAP_INVALID_PSM = 482, /**< L2CAP: Invalid PSM */
  OI_L2CAP_INVALID_MTU = 483, /**< L2CAP: Invalid MTU */
  OI_L2CAP_INVALID_FLUSHTO = 484, /**< L2CAP: Invalid flush timeout */

  OI_HCI_NO_SUCH_CONNECTION =
      601, /**< HCI: caller specified a non-existent connection handle */
  OI_HCI_CB_LIST_FULL =
      603, /**< HCI: callback list is full, cannot attempt to send command */
  OI_HCI_EVENT_UNDERRUN =
      605, /**< HCI: parsing event packet, premature end-of-parameters */
  OI_HCI_UNKNOWN_EVENT_CODE =
      607, /**< HCI: event received - event code is unknown */
  OI_HCI_BAD_EVENT_PARM_LEN =
      608, /**< HCI: event - parameter length is incorrect */
  OI_HCI_CMD_QUEUE_FULL = 611, /**< HCI: command queue is full */
  OI_HCI_SHORT_EVENT =
      612, /**< HCI: event received, missing event code and/or parm len */
  OI_HCI_TRANSMIT_NOT_READY = 613, /**< HCI: ACL/SCO transmit request failed -
                                      busy or no buffers available */
  OI_HCI_ORPHAN_SENT_EVENT =
      614, /**< HCI: got spurious 'sent' event from transport layer */
  OI_HCI_CMD_TABLE_ERROR =
      615, /**< HCI: inconsistency in the internal command table */
  OI_HCI_UNKNOWN_CMD_ID = 616, /**< HCI: HciApi Command - unknown command id */
  OI_HCI_UNEXPECTED_EVENT =
      619, /**< HCI: event received which only occurs in response to our cmd */
  OI_HCI_EVENT_TABLE_ERROR =
      620, /**< HCI: inconsistency in the internal event table */
  OI_HCI_EXPECTED_EVENT_TIMOUT =
      621, /**< HCI: timed out waiting for an expected event */
  OI_HCI_NO_CMD_DESC_FOR_OPCODE = 622, /**< HCI: event opcode is not known */
  OI_HCI_INVALID_OPCODE_ERROR = 623,   /**< HCI: command opcode is invalid */
  OI_HCI_FLOW_CONTROL_DISABLED = 624,  /**< HCI: can not use host flow control
                                          APIs if disabled in configuration */
  OI_HCI_TX_COMPLETE =
      625,               /**< HCI: packet delivery to Host Controler complete */
  OI_HCI_TX_ERROR = 626, /**< HCI: failed to deliver packet to Host Controler */
  OI_HCI_DEVICE_NOT_INITIALIZED = 627, /**< HCI: commands from upper layers
                                          disallowed until device is up and
                                          running */
  OI_HCI_UNSUPPORTED_COMMAND =
      628, /**< HCI: command requested is not supported by local device */
  OI_HCI_PASSTHROUGH_ERROR =
      629, /**< HCI: Error processing passthrough command */
  OI_HCI_PASSTHROUGH_ALREADY_SET =
      630,                      /**< HCI: Passthrough mode already enabled */
  OI_HCI_RESET_FAILURE = 631,   /**< HCI: failed to reset the device/baseband */
  OI_HCI_TRANSPORT_RESET = 632, /**< HCI: some operation failed because of a
                                   reset in the transport */
  OI_HCIERR_HCIIFC_INIT_FAILURE =
      633, /**< HCI: failed to initialize transport layer interface */

  OI_HCIERR_FIRST_ERROR_VALUE = 701, /**< marker for first HCI protocol error */
  OI_HCIERR_UNKNOWN_HCI_COMMAND = 701,        /**< HCI: protocol error 0x01 */
  OI_HCIERR_NO_CONNECTION = 702,              /**< HCI: protocol error 0x02 */
  OI_HCIERR_HARDWARE_FAILURE = 703,           /**< HCI: protocol error 0x03 */
  OI_HCIERR_PAGE_TIMEOUT = 704,               /**< HCI: protocol error 0x04 */
  OI_HCIERR_AUTHENTICATION_FAILURE = 705,     /**< HCI: protocol error 0x05 */
  OI_HCIERR_KEY_MISSING = 706,                /**< HCI: protocol error 0x06 */
  OI_HCIERR_MEMORY_FULL = 707,                /**< HCI: protocol error 0x07 */
  OI_HCIERR_CONNECTION_TIMEOUT = 708,         /**< HCI: protocol error 0x08 */
  OI_HCIERR_MAX_NUM_OF_CONNECTIONS = 709,     /**< HCI: protocol error 0x09 */
  OI_HCIERR_MAX_NUM_OF_SCO_CONNECTIONS = 710, /**< HCI: protocol error 0x0A */
  OI_HCIERR_ACL_CONNECTION_ALREADY_EXISTS =
      711,                                 /**< HCI: protocol error 0x0B */
  OI_HCIERR_COMMAND_DISALLOWED = 712,      /**< HCI: protocol error 0x0C */
  OI_HCIERR_HOST_REJECTED_RESOURCES = 713, /**< HCI: protocol error 0x0D */
  OI_HCIERR_HOST_REJECTED_SECURITY = 714,  /**< HCI: protocol error 0x0E */
  OI_HCIERR_HOST_REJECTED_PERSONAL_DEVICE =
      715,                                   /**< HCI: protocol error 0x0F */
  OI_HCIERR_HOST_TIMEOUT = 716,              /**< HCI: protocol error 0x10 */
  OI_HCIERR_UNSUPPORTED = 717,               /**< HCI: protocol error 0x11 */
  OI_HCIERR_INVALID_PARAMETERS = 718,        /**< HCI: protocol error 0x12 */
  OI_HCIERR_OTHER_END_USER_DISCONNECT = 719, /**< HCI: protocol error 0x13 */
  OI_HCIERR_OTHER_END_LOW_RESOURCES = 720,   /**< HCI: protocol error 0x14 */
  OI_HCIERR_OTHER_END_POWERING_OFF = 721,    /**< HCI: protocol error 0x15 */
  OI_HCIERR_CONNECTION_TERMINATED_LOCALLY =
      722,                                    /**< HCI: protocol error 0x16 */
  OI_HCIERR_REPEATED_ATTEMPTS = 723,          /**< HCI: protocol error 0x17 */
  OI_HCIERR_PAIRING_NOT_ALLOWED = 724,        /**< HCI: protocol error 0x18 */
  OI_HCIERR_UNKNOWN_LMP_PDU = 725,            /**< HCI: protocol error 0x19 */
  OI_HCIERR_UNSUPPORTED_REMOTE_FEATURE = 726, /**< HCI: protocol error 0x1A */
  OI_HCIERR_SCO_OFFSET_REJECTED = 727,        /**< HCI: protocol error 0x1B */
  OI_HCIERR_SCO_INTERVAL_REJECTED = 728,      /**< HCI: protocol error 0x1C */
  OI_HCIERR_SCO_AIR_MODE_REJECTED = 729,      /**< HCI: protocol error 0x1D */
  OI_HCIERR_INVALID_LMP_PARMS = 730,          /**< HCI: protocol error 0x1E */
  OI_HCIERR_UNSPECIFIED_ERROR = 731,          /**< HCI: protocol error 0x1F */
  OI_HCIERR_UNSUPPORTED_LMP_PARAMETERS = 732, /**< HCI: protocol error 0x20 */
  OI_HCIERR_ROLE_CHANGE_NOT_ALLOWED = 733,    /**< HCI: protocol error 0x21 */
  OI_HCIERR_LMP_RESPONSE_TIMEOUT = 734,       /**< HCI: protocol error 0x22 */
  OI_HCIERR_LMP_ERROR_TRANS_COLLISION = 735,  /**< HCI: protocol error 0x23 */
  OI_HCIERR_LMP_PDU_NOT_ALLOWED = 736,        /**< HCI: protocol error 0x24 */
  OI_HCIERR_ENCRYPTION_MODE_NOT_ACCEPTABLE =
      737,                                      /**< HCI: protocol error 0x25 */
  OI_HCIERR_UNIT_KEY_USED = 738,                /**< HCI: protocol error 0x26 */
  OI_HCIERR_QOS_NOT_SUPPORTED = 739,            /**< HCI: protocol error 0x27 */
  OI_HCIERR_INSTANT_PASSED = 740,               /**< HCI: protocol error 0x28 */
  OI_HCIERR_UNIT_KEY_PAIRING_UNSUPPORTED = 741, /**< HCI: protocol error 0x29 */
  OI_HCIERR_DIFFERENT_TRANS_COLLISION = 742,    /**< HCI: protocol error 0x2A */
  OI_HCIERR_RESERVED_2B = 743,                  /**< HCI: protocol error 0x2B */
  OI_HCIERR_QOS_UNACCEPTABLE_PARAMETER = 744,   /**< HCI: protocol error 0x2C */
  OI_HCIERR_QOS_REJECTED = 745,                 /**< HCI: protocol error 0x2D */
  OI_HCIERR_CHANNEL_CLASSIFICATION_NS = 746,    /**< HCI: protocol error 0x2E */
  OI_HCIERR_INSUFFICIENT_SECURITY = 747,        /**< HCI: protocol error 0x2F */
  OI_HCIERR_PARM_OUT_OF_MANDATORY_RANGE = 748,  /**< HCI: protocol error 0x30 */
  OI_HCIERR_RESERVED_31 = 749,                  /**< HCI: protocol error 0x31 */
  OI_HCIERR_ROLE_SWITCH_PENDING = 750,          /**< HCI: protocol error 0x32 */
  OI_HCIERR_RESERVED_33 = 751,                  /**< HCI: protocol error 0x33 */
  OI_HCIERR_RESERVED_SLOT_VIOLATION = 752,      /**< HCI: protocol error 0x34 */
  OI_HCIERR_ROLE_SWITCH_FAILED = 753,           /**< HCI: protocol error 0x35 */
  OI_HCIERR_EIR_TOO_LARGE = 754,                /**< HCI: protocol error 0x36 */
  OI_HCIERR_SSP_NOT_SUPPORTED_BY_HOST = 755,    /**< HCI: protocol error 0x37 */
  OI_HCIERR_HOST_BUSY_PAIRING = 756,            /**< HCI: protocol error 0x38 */

  OI_HCIERR_UNKNOWN_ERROR = 757,    /**< HCI: unknown error code */
  OI_HCIERR_LAST_ERROR_VALUE = 757, /**< marker for last HCI protocol error */

  OI_SDP_SPEC_ERROR = 800, /**< SDP: Base error status for mapping OI_STATUS
                              codes to SDP errors */
  OI_SDP_INVALID_SERVICE_RECORD_HANDLE =
      (OI_SDP_SPEC_ERROR +
       2), /**< SDP: protocol error Invalid Service Record Handle */
  OI_SDP_INVALID_REQUEST_SYNTAX =
      (OI_SDP_SPEC_ERROR +
       3), /**< SDP: protocol error Invalid Request Syntax */
  OI_SDP_INVALID_PDU_SIZE =
      (OI_SDP_SPEC_ERROR + 4), /**< SDP: protocol error Invalid PDU Size */
  OI_SDP_INVALID_CONTINUATION_STATE =
      (OI_SDP_SPEC_ERROR +
       5), /**< SDP: protocol error Invalid Continuation State */
  OI_SDP_INSUFFICIENT_RESOURCES =
      (OI_SDP_SPEC_ERROR +
       6),            /**< SDP: protocol error Insufficient Resources */
  OI_SDP_ERROR = 807, /**< SDP: server returned an error code */
  OI_SDP_CORRUPT_DATA_ELEMENT =
      808, /**< SDP: Invalid or corrupt data element representation */
  OI_SDP_SERVER_NOT_CONNECTED =
      810, /**< SDP: Attempt to disconnect from an unconnected server */
  OI_SDP_ACCESS_DENIED = 811, /**< SDP: Server denied access to server */
  OI_SDP_ATTRIBUTES_OUT_OF_ORDER =
      812, /**< SDP: Attributes in attribute list not in ascending order */
  OI_SDP_DEVICE_DOES_NOT_SUPPORT_SDP =
      813, /**< SDP: Tried to connect to a device that does not support SDP */
  OI_SDP_NO_MORE_DATA =
      815, /**< SDP: Server does not have more continuation data */
  OI_SDP_REQUEST_PARAMS_TOO_LONG =
      816, /**< SDP: Parameters for a request exceed the L2CAP buffer size */
  OI_SDP_REQUEST_PENDING = 817, /**< SDP: Cannot make a request when another
                                   request is being processed */
  OI_SDP_SERVER_CONNECT_FAILED =
      819, /**< SDP: Failed attempt to connect to an SDP server */
  OI_SDP_SERVER_TOO_MANY_CONNECTIONS =
      821, /**< SDP: Exceeded maximum number of simultaneous server connections
              */
  OI_SDP_NO_MATCHING_SERVICE_RECORD =
      823, /**< SDP: No service record matched the UUID list */
  OI_SDP_PARTIAL_RESPONSE = 824, /**< SDP: Internal use only */
  OI_SDP_ILLEGAL_ARGUMENT =
      825, /**< SDP: Illegal argument passed to an SDP function */
  OI_SDP_ATTRIBUTE_NOT_FOUND =
      826, /**< SDP: A requested attribute was not found in a service record */
  OI_SDP_DATABASE_OUT_OF_RESOURCES =
      827,                /**< SDP: server database is out of memory */
  OI_SDP_SHORT_PDU = 829, /**< SDP: Not enough bytes in the packet */
  OI_SDP_TRANSACTION_ID_MISMATCH =
      830, /**< SDP: Transaction Id was not as expected */
  OI_SDP_UNEXPECTED_RESPONSE_PDU_ID =
      831, /**< SDP: Did not expect this response PDU */
  OI_SDP_REQUEST_TIMEOUT =
      832, /**< SDP: Did not get a response within the timeout period */
  OI_SDP_INVALID_RESPONSE_SYNTAX =
      833, /**< SDP: Response is not correctly formatted */
  OI_SDP_CONNECTION_TIMEOUT =
      834, /**< SDP: Connection attempt timed out at a lower layer */
  OI_SDP_RESPONSE_DATA_ERROR =
      835, /**< SDP: Response to a service request appears to be corrupt */
  OI_SDP_TOO_MANY_ATTRIBUTE_BYTES =
      836, /**< SDP: Response contained more bytes than requested. */
  OI_SDP_TOO_MANY_SERVICE_RECORDS =
      837, /**< SDP: Response contained more service records than requested. */
  OI_SDP_INVALID_CONNECTION_ID =
      838, /**< SDP: Invalid connection ID in an SDP request */
  OI_SDP_CANNOT_SET_ATTRIBUTE =
      839, /**< SDP: Attempt to set a dynamic attribute value failed */
  OI_SDP_BADLY_FORMED_ATTRIBUTE_VALUE =
      840, /**< SDP: An attribute value has the wrong type or structure */
  OI_SDP_NO_ATTRIBUTE_LIST_TO_REMOVE =
      841, /**< SDP: Attempt to remove a non-existent attribute list from a
              service record */
  OI_SDP_ATTRIBUTE_LIST_ALREADY_ADDED = 842, /**< SDP: An attribute list has
                                                already been added to the
                                                service record */
  OI_SDP_DATA_ELEMENT_TRUNCATED =
      843, /**< SDP: Data element truncated (too few bytes) */

  OI_RFCOMM_WRITE_IN_PROGRESS = 901,     /**< RFCOMM: Write in progress */
  OI_RFCOMM_INVALID_BAUDRATE = 903,      /**< RFCOMM: Invalid baudrate */
  OI_RFCOMM_INVALID_DATABIT = 904,       /**< RFCOMM: Invalid databit */
  OI_RFCOMM_INVALID_STOPBIT = 905,       /**< RFCOMM: Invalid stopbit */
  OI_RFCOMM_INVALID_PARITY = 906,        /**< RFCOMM: Invalid parity */
  OI_RFCOMM_INVALID_PARITYTYPE = 907,    /**< RFCOMM: Invalid paritytype */
  OI_RFCOMM_INVALID_FLOWCONTROL = 908,   /**< RFCOMM: Invalid flowcontrol */
  OI_RFCOMM_SESSION_EXISTS = 909,        /**< RFCOMM: Session exists */
  OI_RFCOMM_INVALID_CHANNEL = 910,       /**< RFCOMM: Invalid channel */
  OI_RFCOMM_DLCI_EXISTS = 911,           /**< RFCOMM: DLCI exists */
  OI_RFCOMM_LINK_NOT_FOUND = 912,        /**< RFCOMM: Link not found */
  OI_RFCOMM_REMOTE_REJECT = 913,         /**< RFCOMM: Remote reject */
  OI_RFCOMM_TEST_IN_PROGRESS = 915,      /**< RFCOMM: Test in progress */
  OI_RFCOMM_SESSION_NOT_FOUND = 916,     /**< RFCOMM: Session not found */
  OI_RFCOMM_INVALID_PACKET = 917,        /**< RFCOMM: Invalid packet */
  OI_RFCOMM_FRAMESIZE_EXCEEDED = 918,    /**< RFCOMM: Framesize exceeded */
  OI_RFCOMM_INVALID_DLCI = 920,          /**< RFCOMM: Invalid dlci */
  OI_RFCOMM_SERVER_NOT_REGISTERED = 921, /**< RFCOMM: Server not registered */
  OI_RFCOMM_CREDIT_ERROR = 922,          /**< RFCOMM: Credit error */
  OI_RFCOMM_NO_CHANNEL_NUMBER = 923,     /**< RFCOMM: No channel number */
  OI_RFCOMM_QUERY_IN_PROGRESS = 924,     /**< RFCOMM: Query in progress */
  OI_RFCOMM_SESSION_SHUTDOWN = 925,      /**< RFCOMM: Session shutdown */
  OI_RFCOMM_LOCAL_DEVICE_DISCONNECTED =
      926, /**< RFCOMM: Local device disconnected */
  OI_RFCOMM_REMOTE_DEVICE_DISCONNECTED =
      927, /**< RFCOMM: Remote device disconnected */
  OI_RFCOMM_OUT_OF_SERVER_CHANNELS = 928, /**< RFCOMM: Out of server channels */

  OI_DISPATCH_INVALID_CB_HANDLE =
      1001, /**< Dispatcher was handed an invalid callback handle */
  OI_DISPATCH_TABLE_OVERFLOW = 1002, /**< Dispatcher table is full */

  OI_TEST_UNKNOWN_TEST = 1101, /**< TEST: Unknown test */
  OI_TEST_FAIL = 1102,         /**< TEST: Fail */

  OI_HCITRANS_CANNOT_CONNECT_TO_DEVICE =
      1201, /**< TRANSPORT: Cannot connect to device */
  OI_HCITRANS_BUFFER_TOO_SMALL = 1203,   /**< TRANSPORT: Buffer too small */
  OI_HCITRANS_NULL_DEVICE_HANDLE = 1204, /**< TRANSPORT: Null device handle */
  OI_HCITRANS_IO_ERROR = 1205,           /**< TRANSPORT: IO error */
  OI_HCITRANS_DEVICE_NOT_READY = 1206,   /**< TRANSPORT: Device not ready */
  OI_HCITRANS_FUNCTION_NOT_SUPPORTED =
      1207,                            /**< TRANSPORT: Function not supporteD */
  OI_HCITRANS_ACCESS_DENIED = 1209,    /**< TRANSPORT: win32 */
  OI_HCITRANS_ACL_DATA_ERROR = 1210,   /**< TRANSPORT: ACL data error */
  OI_HCITRANS_SCO_DATA_ERROR = 1211,   /**< TRANSPORT: SCO data error */
  OI_HCITRANS_EVENT_DATA_ERROR = 1212, /**< TRANSPORT: HCI event data error */
  OI_HCITRANS_INTERNAL_ERROR =
      1214, /**< TRANSPORT: Internal error in the transport */
  OI_HCITRANS_LINK_NOT_ACTIVE =
      1215, /**< TRANSPORT: Link to the device is not currently active */
  OI_HCITRANS_INITIALIZING = 1216, /**< TRANSPORT: Transport is initializing */

  OI_DEVMGR_NO_CONNECTION = 1301,  /**< DEVMGR: No connection */
  OI_DEVMGR_HARDWARE_ERROR = 1305, /**< DEVMGR: error reported by HCI */
  OI_DEVMGR_PENDING_CONNECT_LIST_FULL =
      1307, /**< DEVMGR: Pending connect list full */
  OI_DEVMGR_CONNECTION_LIST_FULL = 1309, /**< DEVMGR: Connection list full */
  OI_DEVMGR_NO_SUCH_CONNECTION = 1310,   /**< DEVMGR: No such connection */
  OI_DEVMGR_INQUIRY_IN_PROGRESS = 1311,  /**< DEVMGR: Inquiry in progress */
  OI_DEVMGR_PERIODIC_INQUIRY_ACTIVE =
      1312, /**< DEVMGR: Periodic inquiry active */
  OI_DEVMGR_NO_INQUIRIES_ACTIVE =
      1313, /**< DEVMGR: can not cancel/exit if not active */
  OI_DEVMGR_DUPLICATE_CONNECTION = 1314, /**< DEVMGR: internal error */
  OI_DEVMGR_DUPLICATE_EVENT_CALLBACK =
      1316, /**< DEVMGR: attempt to register same callback twice */
  OI_DEVMGR_EVENT_CALLBACK_LIST_FULL =
      1317, /**< DEVMGR: can not register event callback, list is full */
  OI_DEVMGR_EVENT_CALLBACK_NOT_FOUND =
      1318, /**< DEVMGR: attempt to unregister callback failed */
  OI_DEVMGR_BUSY =
      1319, /**< DEVMGR: some operations can only execute one at a time */
  OI_DEVMGR_ENUM_UNEXPECTED_INQ_COMPLETE = 1320, /**< DEVMGR: inquiry complete
                                                    event in inappropriate
                                                    enumeration state */
  OI_DEVMGR_ENUM_UNEXPECTED_INQ_RESULT = 1321, /**< DEVMGR: inquiry result event
                                                  in inappropriate enumeration
                                                  state */
  OI_DEVMGR_ENUM_DATABASE_FULL =
      1322, /**< DEVMGR: device enumeration, database is full, couldn't add a
               new device */
  OI_DEVMGR_ENUM_INQUIRIES_OVERLAP = 1323, /**< DEVMGR: device enumeration,
                                              periodic inquiries occurring too
                                              close together */
  OI_DEVMGR_UNKNOWN_LINK_TYPE =
      1324, /**< DEVMGR: HCI connect request with unkown link type */
  OI_DEVMGR_PARAM_IO_ACTIVE = 1325, /**< DEVMGR: request for parameter
                                       read/write while param read/write active
                                       */
  OI_DEVMGR_UNKNOWN_IAC_LAP = 1326, /**< DEVMGR: unrecognized IAC LAP */
  OI_DEVMGR_SCO_ALREADY_REGISTERED =
      1327, /**< DEVMGR: only one application can use SCO */
  OI_DEVMGR_SCO_NOT_REGISTERED =
      1328, /**< DEVMGR: SCO applications must register before using the API */
  OI_DEVMGR_SCO_WITHOUT_ACL =
      1329, /**< DEVMGR: Got SCO connection but there is no underlying ACL
               connection */
  OI_DEVMGR_NO_SUPPORT =
      1330, /**< DEVMGR: Request is not supported by the device */
  OI_DEVMGR_WRITE_POLICY_FAILED = 1331, /**< DEVMGR: connection attempt failed -
                                           unable to write link policy */
  OI_DEVMGR_NOT_IN_MASTER_MODE = 1332,  /**< DEVMGR: OI_DEVMGR EndMasterMode
                                           without prior
                                           OI_DEVMGR_BeginMasterMode */
  OI_DEVMGR_POLICY_VIOLATION =
      1333, /**< DEVMGR: low-power request is rejected - link policy does not
               allow it */
  OI_DEVMGR_BUSY_TIMEOUT = 1334, /**< DEVMGR: queued operation timed out while
in the queue; \n
timeout configurable via @ref OI_CONFIG_DEVMGR::connectQueueTimeoutSecs
"connectQueueTimeoutSecs" */
  OI_DEVMGR_REENCRYPT_FAILED =
      1335, /**< DEVMGR: failed to re-encrypt link after role switch */
  OI_DEVMGR_ROLE_POLICY_CONFLICT =
      1336, /**< DEVMGR: requested role conflicts with current policy */
  OI_DEVMGR_BAD_INTERVAL = 1337, /**< DEVMGR: current linkTO outside range of
                                    requested min/max interval */
  OI_DEVMGR_INVALID_SCO_HANDLE =
      1338, /**< DEVMGR: HCI SCO event, invalid handle */
  OI_DEVMGR_CONNECTION_OVERLAP = 1339, /**< DEVMGR: Connection failed due to
                                          race condition with remote side */
  OI_DEVMGR_ORPHAN_SUBRATE_COMPLETE =
      1340, /**< DEVMGR: sniff subrate complete, but no callback */
  OI_DEVMGR_EIR_RESPONSE_2_LARGE =
      1341, /**< DEVMGR: eir builder, response length would exceed spec max */

  OI_SECMGR_NO_POLICY =
      1401, /**< SECMGR: no security policy has been established */
  OI_SECMGR_INTERNAL_ERROR = 1402, /**< SECMGR: internal inconsistency */
  OI_SECMGR_ORPHANED_CALLBACK =
      1403, /**< SECMGR: we've been called back, but CB context is gone */
  OI_SECMGR_BUSY =
      1404, /**< SECMGR: configure and access request cannot be concurrent */
  OI_SECMGR_DEVICE_NOT_TRUSTED =
      1405, /**< SECMGR: l2cap access denied - device is not trusted */
  OI_SECMGR_DEVICE_ENCRYPT_FAIL =
      1407, /**< SECMGR: l2cap access denied - failed to start encryption */
  OI_SECMGR_DISCONNECTED_FAIL =
      1408, /**< SECMGR: l2cap access denied - disconnected */
  OI_SECMGR_ACCESS_PENDING =
      1409, /**< SECMGR: l2cap access request is still pending  */
  OI_SECMGR_PIN_CODE_TOO_SHORT =
      1410, /**< SECMGR: Higher-layer process gave us a pin code that is too
               short */
  OI_SECMGR_UNKNOWN_ENCRYPT_VALUE = 1411, /**< SECMGR: got EncryptionChange
                                             event, unknown encryption enable
                                             value */
  OI_SECMGR_INVALID_POLICY = 1412, /**< SECMGR: the specified security policy is
                                      not valid for security mode */
  OI_SECMGR_AUTHORIZATION_FAILED =
      1413, /**< SECMGR: device authorization failed */
  OI_SECMGR_ENCRYPTION_FAILED = 1414, /**< SECMGR: device encryption failed */
  OI_SECMGR_UNIT_KEY_UNSUPPORTED =
      1415, /**< SECMGR: authentication failed due to non-support of unit keys
               */
  OI_SECMGR_NOT_REGISTERED =
      1416, /**< SECMGR: required registrations have not yet occurred */
  OI_SECMGR_ILLEGAL_WRITE_SSP_MODE =
      1417, /**< SECMGR: 2.1 HCI spec does not allow SSP mode to be disabled */
  OI_SECMGR_INVALID_SEC_LEVEL =
      1418, /**< SECMGR: security level for a service is not a valid value */
  OI_SECMGR_INSUFFICIENT_LINK_KEY = 1419, /**< SECMGR: link key type is not
                                             sufficient to meet service
                                             requirements */
  OI_SECMGR_INVALID_KEY_TYPE =
      1420, /**< SECMGR: link key type is not a valid value */
  OI_SECMGR_SSP_NOT_ENCRYPTED =
      1421, /**< SECMGR: ssp required encryption on incoming link */
  OI_SECMGR_ORPHAN_EVENT = 1422, /**< SECMGR: some HCI security event unrelated
                                    to current processes */
  OI_SECMGR_NOT_BONDABLE = 1423, /**< SECMGR: not in bondable mode */

  OI_TCS_INVALID_ELEMENT_TYPE = 1602, /**< TCS: element type is invalid */
  OI_TCS_INVALID_PACKET = 1603,       /**< TCS: packet is invalide */
  OI_TCS_CALL_IN_PROGRESS = 1604,     /**< TCS: call is in progress */
  OI_TCS_NO_CALL_IN_PROGRESS = 1605,  /**< TCS: no call in progress */

  OI_OBEX_CONTINUE = 1701, /**< OBEX: Continue processing OBEX request */
  OI_OBEX_COMMAND_ERROR =
      1702, /**< OBEX: An unrecognized OBEX command opcode */
  OI_OBEX_CONNECTION_TIMEOUT =
      1703, /**< OBEX: Timeout waiting for a response to a request */
  OI_OBEX_CONNECT_FAILED =
      1704, /**< OBEX: An OBEX connection request did not succeed */
  OI_OBEX_DISCONNECT_FAILED = 1705, /**< OBEX: A disconnect failed probably
                                       because the connection did not exist */
  OI_OBEX_ERROR = 1706,             /**< OBEX: Unspecified OBEX error */
  OI_OBEX_INCOMPLETE_PACKET = 1707, /**< OBEX: Packet too short or corrupt */
  OI_OBEX_LENGTH_REQUIRED =
      1708, /**< OBEX: Length header required in OBEX command */
  OI_OBEX_NOT_CONNECTED = 1709, /**< OBEX: No connection to OBEX server */
  OI_OBEX_NO_MORE_CONNECTIONS =
      1710, /**< OBEX: Reached max connections limit */
  OI_OBEX_OPERATION_IN_PROGRESS =
      1711, /**< OBEX: Another operation is still in progress on a connection */
  OI_OBEX_PUT_RESPONSE_ERROR =
      1712, /**< OBEX: An error in the response to a PUT command */
  OI_OBEX_GET_RESPONSE_ERROR =
      1713, /**< OBEX: An error in the response to a GET command */
  OI_OBEX_REQUIRED_HEADER_NOT_FOUND =
      1714, /**< OBEX: packet was missing a required header */
  OI_OBEX_SERVICE_UNAVAILABLE =
      1715, /**< OBEX: Unown OBEX target or required service */
  OI_OBEX_TOO_MANY_HEADER_BYTES =
      1716, /**< OBEX: Headers will not fit in single OBEX packet */
  OI_OBEX_UNKNOWN_COMMAND = 1717,     /**< OBEX: Unrecognized OBEX command */
  OI_OBEX_UNSUPPORTED_VERSION = 1718, /**< OBEX: Version mismatch */
  OI_OBEX_CLIENT_ABORTED_COMMAND =
      1719,                  /**< OBEX: server received abort command */
  OI_OBEX_BAD_PACKET = 1720, /**< OBEX: Any malformed OBEX packet */
  OI_OBEX_BAD_REQUEST =
      1721, /**< OBEX: Maps to OBEX response of the same name */
  OI_OBEX_OBJECT_OVERFLOW = 1723, /**< OBEX: Too many bytes received. */
  OI_OBEX_NOT_FOUND = 1724, /**< OBEX: Maps to obex response of same name */
  OI_OBEX_ACCESS_DENIED =
      1735, /**< OBEX: Object could not be read or written. */
  OI_OBEX_VALUE_NOT_ACCEPTABLE =
      1736, /**< OBEX: Value in a command was not in the acceptable range. */
  OI_OBEX_PACKET_OVERFLOW =
      1737, /**< OBEX: Buffer will not fit in a single OBEX packet. */
  OI_OBEX_NO_SUCH_FOLDER =
      1738, /**< OBEX: Error returned by a setpath operation. */
  OI_OBEX_NAME_REQUIRED =
      1739, /**< OBEX: Name must be non-null and non-empty. */
  OI_OBEX_PASSWORD_TOO_LONG =
      1740, /**< OBEX: Password exceeds implementation imposed length limit. */
  OI_OBEX_PRECONDITION_FAILED = 1741, /**< OBEX: response Precondition Failed */
  OI_OBEX_UNAUTHORIZED = 1742, /**< OBEX: authentication was not successful. */
  OI_OBEX_NOT_IMPLEMENTED = 1743, /**< OBEX: Unimplemented feature. */
  OI_OBEX_INVALID_AUTH_DIGEST =
      1744, /**< OBEX: An authentication digest was bad. */
  OI_OBEX_INVALID_OPERATION =
      1745, /**< OBEX: Operation not allowed at this time. */
  OI_OBEX_DATABASE_FULL = 1746,   /**< OBEX: Sync database full. */
  OI_OBEX_DATABASE_LOCKED = 1747, /**< OBEX: Sync database locked. */
  OI_OBEX_INTERNAL_SERVER_ERROR =
      1748, /**< OBEX: response Internal Server Error */
  OI_OBEX_UNSUPPORTED_MEDIA_TYPE =
      1749,                       /**< OBEX: response Unsupported Media Type */
  OI_OBEX_PARTIAL_CONTENT = 1750, /**< OBEX: response Partial Content */
  OI_OBEX_METHOD_NOT_ALLOWED = 1751, /**< OBEX: response Method Not Allowed */
  OI_OBEXSRV_INCOMPLETE_GET = 1752,  /**< OBEX: Indicates to a GET handler that
                                        the request phase is still in progress */
  OI_OBEX_FOLDER_BROWSING_NOT_ALLOWED = 1753, /**< OBEX: Indicates that an FTP
                                                 server does not allow folder
                                                 browsing */
  OI_OBEX_SERVER_FORCED_DISCONNECT =
      1754, /**< OBEX: connection was forcibly terminated by the server */
  OI_OBEX_OFS_ERROR = 1755, /**< OBEX: OPP object file system error occurred */
  OI_OBEX_FILEOP_ERROR =
      1756, /**< OBEX: FTP/PBAP file operation system error occurred */
  OI_OBEX_USERID_TOO_LONG =
      1757, /**< OBEX: User Id exceeds spec limited length limit. */

  OI_HANDSFREE_EVENT_REPORTING_DISABLED =
      1801,                          /**< HANDSFREE: Event reporting disabled */
  OI_HANDSFREE_NOT_CONNECTED = 1802, /**< HANDSFREE: Not connected */
  OI_HANDSFREE_SERVICE_NOT_STARTED = 1803, /**< HANDSFREE: Cannot connect to
                                              handsfree AG if handsfree service
                                              not started */
  OI_HANDSFREE_AG_SERVICE_NOT_STARTED =
      1804, /**< HANDSFREE: Cannot connect to handsfree device if handsfree AG
               service not started */
  OI_HANDSFREE_COMMAND_IN_PROGRESS =
      1805, /**< HANDSFREE: Cannot accept a command at this time */
  OI_HANDSFREE_AUDIO_ALREADY_CONNECTED =
      1806, /**< HANDSFREE: Audio is already connected */
  OI_HANDSFREE_AUDIO_NOT_CONNECTED =
      1807, /**< HANDSFREE: Audio is not connected */
  OI_HANDSFREE_FEATURE_NOT_SUPPORTED = 1808, /**< HANDSFREE: Local or remote
                                                feature not supported for
                                                requested command */

  OI_HEADSET_SERVICE_NOT_STARTED =
      1901, /**< HEADSET: Cannot connect to headset AG if headset service not
               started */
  OI_HEADSET_AG_SERVICE_NOT_STARTED = 1902, /**< HEADSET: Cannot connect to
                                               headset device if headset AG
                                               service not started */
  OI_HEADSET_COMMAND_IN_PROGRESS =
      1903, /**< HEADSET: Cannot accept a command at this time */

  OI_BNEP_INVALID_MTU =
      2001, /**< BNEP: The remote device cannot support the minimum BNEP MTU */
  OI_BNEP_SETUP_TIMEOUT = 2002, /**< BNEP: The setup request timed out. */
  OI_BNEP_SERVICE_NOT_REGISTERED =
      2003, /**< BNEP: The requested service was not found. */
  OI_BNEP_INVALID_HANDLE =
      2004, /**< BNEP: The specified connection handle is not valid. */
  OI_BNEP_RESPONSE_TIMEOUT =
      2005, /**< BNEP: The timer for receiving a response has expired. */
  OI_BNEP_INVALID_CONNECTION = 2006, /**< BNEP: Invalid connection */
  OI_BNEP_INVALID_FILTER = 2007, /**< BNEP: The supplied filter was invalid. */
  OI_BNEP_CONNECTION_EXISTS =
      2008, /**< BNEP: An attempt was made to create a duplicate connection. */
  OI_BNEP_NOT_INITIALIZED = 2009, /**< BNEP: Init has not been called */
  OI_BNEP_CONNECT_BASE = 2010,    /**< BNEP: connection response codes */
  OI_BNEP_CONNECT_FAILED_INVALID_DEST_UUID =
      2011, /**< BNEP: connect response code Invalid Dest UUID */
  OI_BNEP_CONNECT_FAILED_INVALID_SOURCE_UUID =
      2012, /**< BNEP: connect response code Invalid Source UUID */
  OI_BNEP_CONNECT_FAILED_INVALID_UUID_SIZE =
      2013, /**< BNEP: connect response code Invalid UUID Size */
  OI_BNEP_CONNECT_FAILED_NOT_ALLOWED =
      2014, /**< BNEP: connect response code Not Allowed */
  OI_BNEP_FILTER_NET_BASE = 2020, /**< BNEP: filter response codes */
  OI_BNEP_FILTER_NET_UNSUPPORTED_REQUEST =
      2021, /**< BNEP: filter response code Unsupported Request */
  OI_BNEP_FILTER_NET_FAILED_INVALID_PROTOCOL_TYPE =
      2022, /**< BNEP: filter response code Invalid Protocol Type */
  OI_BNEP_FILTER_NET_FAILED_MAX_LIMIT_REACHED =
      2023, /**< BNEP: filter response code Max Limit Reached */
  OI_BNEP_FILTER_NET_FAILED_SECURITY =
      2024,                         /**< BNEP: filter response code Security */
  OI_BNEP_FILTER_MULTI_BASE = 2030, /**< BNEP: multicast response codes */
  OI_BNEP_FILTER_MULTI_UNSUPPORTED_REQUEST =
      2031, /**< BNEP: multicast response code Unsupported Request */
  OI_BNEP_FILTER_MULTI_FAILED_INVALID_ADDRESS =
      2032, /**< BNEP: multicast response code Invalid Address */
  OI_BNEP_FILTER_MULTI_FAILED_MAX_LIMIT_REACHED =
      2033, /**< BNEP: multicast response code Max Limit Reached */
  OI_BNEP_FILTER_MULTI_FAILED_SECURITY =
      2034, /**< BNEP: multicast response code Security */
  OI_BNEP_LOCAL_DEVICE_MUST_BE_MASTER =
      2040, /**< BNEP: Device must be master of the piconet for this function */
  OI_BNEP_PACKET_FILTERED_OUT =
      2041, /**< BNEP: Packet did not pass current filters */

  OI_NETIFC_UP_FAILED =
      2101, /**< NETIFC: Could not bring up network interface */
  OI_NETIFC_COULD_NOT_CREATE_THREAD =
      2102, /**< NETIFC: Network interface could not create a read thread */
  OI_NETIFC_INITIALIZATION_FAILED =
      2103, /**< NETIFC: Error in network interface initialization */
  OI_NETIFC_INTERFACE_ALREADY_UP =
      2104, /**< NETIFC: Network interface is already up */
  OI_NETIFC_INTERFACE_NOT_UP = 2105, /**< NETIFC: Network interface is not up */
  OI_NETIFC_PACKET_TOO_BIG = 2106,   /**< NETIFC: The packet is too big */

  OI_PAN_ROLE_ALREADY_REGISTERED =
      2201, /**< PAN: This PAN role was already registered */
  OI_PAN_ROLE_NOT_ALLOWED =
      2202, /**< PAN: The PAN role is not currently allowed */
  OI_PAN_INCOMPATIBLE_ROLES =
      2203, /**< PAN: Only certain local and remote role combinations are
               permitted */
  OI_PAN_INVALID_ROLE =
      2204, /**< PAN: Role specified is not one the defined PAN roles */
  OI_PAN_CONNECTION_IN_PROGRESS =
      2205, /**< PAN: A PAN connection is currently being established */
  OI_PAN_USER_ALREADY_CONNECTED =
      2206, /**< PAN: PAN user role only allows a single connection */
  OI_PAN_DEVICE_CONNECTED =
      2207, /**< PAN: A PAN connection already exists to specified device */

  OI_CODEC_SBC_NO_SYNCWORD = 2301, /**< CODEC: Couldn't find an SBC SYNCWORD */
  OI_CODEC_SBC_NOT_ENOUGH_HEADER_DATA =
      2302, /**< CODEC: Not enough data provided to decode an SBC header */
  OI_CODEC_SBC_NOT_ENOUGH_BODY_DATA =
      2303, /**< CODEC: Decoded the header, but not enough data to contain the
               rest of the frame */
  OI_CODEC_SBC_NOT_ENOUGH_AUDIO_DATA =
      2304, /**< CODEC: Not enough audio data for this frame */
  OI_CODEC_SBC_CHECKSUM_MISMATCH =
      2305, /**< CODEC: The frame header didn't match the checksum */
  OI_CODEC_SBC_PARTIAL_DECODE =
      2306, /**< CODEC: Decoding was successful, but frame data still remains.
               Next call will provide audio without consuming input data. */

  OI_FIFOQ_QUEUE_NOT_ALIGNED = 2401, /**< FIFOQ: queue must be 32-bit aligned */
  OI_FIFOQ_INVALID_Q = 2402, /**< FIFOQ: queue parameter is not a valid queue */
  OI_FIFOQ_BUF_TOO_LARGE =
      2403, /**< FIFOQ: attempt to queue a buffer which is too large */
  OI_FIFOQ_FULL = 2404, /**< FIFOQ: enqueue() failed, queue is full */
  OI_FIFOQ_NOT_ALLOCATED =
      2405, /**< FIFOQ: Enqueue QBuf() failed, buffer not allocated */
  OI_FIFOQ_INVALID_DATA_PTR =
      2406, /**< FIFOQ: Enqueue QBuf() failed, data pointer does not match */

  OI_HID_HOST_SERVICE_NOT_STARTED = 2601, /**< HID: Cannot connect to a HID
                                             device unless HID host is started
                                             */
  OI_HID_DEVICE_SERVICE_NOT_STARTED =
      2602, /**< HID: Cannot connect to a HID host unless HID device is started
               */

  OI_AT_ERROR = 2701,       /**< AT: ERROR response */
  OI_AT_NO_CARRIER = 2702,  /**< AT: NO CARRIER response */
  OI_AT_BUSY = 2703,        /**< AT: BUSY response */
  OI_AT_NO_ANSWER = 2704,   /**< AT: NO ANSWER response */
  OI_AT_DELAYED = 2705,     /**< AT: DELAYED response */
  OI_AT_BLACKLISTED = 2706, /**< AT: BLACKLISTED response */
  OI_AT_CME_ERROR = 2707,   /**< AT: +CME ERROR response */
  OI_AT_CMS_ERROR = 2708,   /**< AT: +CMS ERROR response */

  OI_BLST_CHARACTER_TIMEOUT =
      2801, /**< BLST: Timeout expired while waiting for a character from the
               client. */
  OI_BLST_ACKNOWLDGE_TIMEOUT =
      2802, /**< BLST: Timeout expired while waiting for event acknowledgment
               from the client */
  OI_BLST_TX_NOT_READY = 2803, /**< BLST: BLST is not ready to send a BHAPI
                                  message to the client. */
  OI_BLST_TX_BUSY = 2804,      /**< BLST: BLST transmit buffer is in use. */

  OI_AVDTP_CONNECTION_SEQ_ERROR =
      2901, /**< AVDTP: sequencing of signalling/media channel connections
               broken. */
  OI_AVDTP_OUT_OF_RESOURCES = 2902, /**< AVDTP: Tried to allocate too many
                                       endpoints or signalling channels. */

  OI_PBAP_REPOSITORY_NOT_SET =
      3001, /**< PBAP: Phonebook repository must be set for operation to
               complete. */
  OI_PBAP_PHONEBOOK_NOT_SET =
      3002, /**< PBAP: Phonebook be set for operation to complete. */

  OI_AADP_BAD_ENDPOINT = 3101, /**< AADP: Invalid local endpoint specified */
  OI_AADP_BAD_STATE =
      3102, /**< AADP: AADP State is not correct for this operation. */

  OI_UNICODE_INVALID_SOURCE = 3200,   /**< Unicode Conversion: Source string has
                                         invalid character encoding. */
  OI_UNICODE_SOURCE_EXHAUSTED = 3201, /**< Unicode Conversion: Incomplete
                                         Unicode character at end of source
                                         buffer. */
  OI_UNICODE_DESTINATION_EXHAUSTED = 3202, /**< Unicode Conversion: Destination
                                              buffer not large enough to hold
                                              resulting Unicode string. */

  OI_AVRCP_TOO_MANY_CONNECTIONS = 3300, /**< AVRCP: Exceeded maximum number of
                                           simultaneous AVCTP connections. */
  OI_AVRCP_NOT_IMPLEMENTED =
      3301, /**< AVRCP: The target does not implement the command specified by
               the opcode and operand. */
  OI_AVRCP_REJECTED = 3302, /**< AVRCP: The target cannot respond because of
                               invalid operands in command packet. */
  OI_AVRCP_INVALID_RESPONSE = 3303, /**< AVRCP: The controller received the
                                       response with invalid parameters */
  OI_AVRCP_RESPONSE_PACKET_OVERFLOW =
      3304, /**< AVRCP: The response message does not fir in one AVRCP packet
               (512 bytes), has to be fragmented. */
  OI_AVRCP_RESPONSE_INVALID_PDU = 3305, /**< AVRCP: Command rejected: target
                                           received a PDU that it did not
                                           understand. */
  OI_AVRCP_RESPONSE_INVALID_PARAMETER = 3306, /**< AVRCP: Command rejected:
                                                 target received a PDU with a
                                                 parameter ID that it did not
                                                 understand. */
  OI_AVRCP_RESPONSE_PARAMETER_NOT_FOUND =
      3307, /**< AVRCP: Command rejected: specified parameter not found, sent if
               the parameter ID is understood, but content is wrong or
               corrupted.*/
  OI_AVRCP_RESPONSE_INTERNAL_ERROR =
      3308, /**< AVRCP: Command rejected: target detected other error
               conditions. */
  OI_MAX_BM3_STATUS_VAL, /* Maximum BM3 status code */

  /* Status code values reserved for BM3 SDK platform-specific implementations
     */
  OI_STATUS_RESERVED_FOR_BCOT = 9000,

  /* Status code values reserved for BHAPI products */
  OI_STATUS_RESERVED_FOR_BHAPI = 9200,

  /* Status code values reserved for Soundabout products */
  OI_STATUS_RESERVED_FOR_SOUNDABOUT = 9400,

  /*
   * Status code values greater than or equal to this value are reserved for use
   * by applications.
   * However, because of differences between compilers, and differences between
   * 16-bit and 32-bit
   * platforms custom status codes should be in the 16-bit range, so status
   * codes can range from 0
   * to 65534, inclusive (65535 is reserved)
   */
  OI_STATUS_RESERVED_FOR_APPS = 10000,

  OI_STATUS_NONE = 0xffff /**< Special status code to indicate that there is no
                             status. (Only to be used for special cases
                             involving OI_SLOG_ERROR() and OI_SLOG_WARNING().)
                             */

} OI_STATUS;

/* Remeber to update the #define below when new reserved blocks are added to
 * the list above. */
#define OI_NUM_RESERVED_STATUS_BLOCKS \
  4 /**< Number of status code blocks reserved, including user apps */

/**
 * Test for success
 */
#define OI_SUCCESS(x) ((x) == OI_OK)

/*****************************************************************************/
#ifdef __cplusplus
}
#endif

/**@}*/

#endif /* _OI_STATUS_H */