| /****************************************************************************** |
| * |
| * Copyright 2014 The Android Open Source Project |
| * Copyright 2002 - 2004 Open Interface North America, Inc. All rights |
| * reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| #ifndef _OI_STATUS_H |
| #define _OI_STATUS_H |
| /** |
| * @file |
| * This file contains status codes for BLUEmagic 3.0 software. |
| */ |
| |
| #include "oi_stddefs.h" |
| |
| /** \addtogroup Misc Miscellaneous APIs */ |
| /**@{*/ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** test it **/ |
| |
| /** |
| * OI_STATUS is 16 bits, so status codes can range from 0 to 66535, inclusive. |
| */ |
| |
| typedef enum { |
| OI_STATUS_SUCCESS = 0, /**< function call succeeded alias for #OI_OK */ |
| OI_OK = 0, /**< function call succeeded alias for #OI_STATUS_SUCCESS */ |
| OI_STATUS_INVALID_PARAMETERS = 101, /**< invalid function input parameters */ |
| OI_STATUS_NOT_IMPLEMENTED = |
| 102, /**< attempt to use an unimplemented function */ |
| OI_STATUS_NOT_INITIALIZED = 103, /**< data not initialized */ |
| OI_STATUS_NO_RESOURCES = |
| 104, /**< generic resource allocation failure status */ |
| OI_STATUS_INTERNAL_ERROR = 105, /**< internal inconsistency */ |
| OI_STATUS_OUT_OF_MEMORY = 106, /**< generally, OI_Malloc failed */ |
| OI_ILLEGAL_REENTRANT_CALL = |
| 107, /**< violation of non-reentrant module policy */ |
| OI_STATUS_INITIALIZATION_FAILED = 108, /**< module initialization failed */ |
| OI_STATUS_INITIALIZATION_PENDING = |
| 109, /**< inititialization not yet complete */ |
| OI_STATUS_NO_SCO_SUPPORT = |
| 110, /**< SCO operation rejected; system not configured for SCO */ |
| OI_STATUS_OUT_OF_STATIC_MEMORY = 111, /**< static malloc failed */ |
| OI_TIMEOUT = 112, /**< generic timeout */ |
| OI_OS_ERROR = 113, /**< some operating system error */ |
| OI_FAIL = 114, /**< generic failure */ |
| OI_STRING_FORMAT_ERROR = 115, /**< error in VarString formatting string */ |
| OI_STATUS_PENDING = 116, /**< The operation is pending. */ |
| OI_STATUS_INVALID_COMMAND = 117, /**< The command was invalid. */ |
| OI_BUSY_FAIL = 118, /**< command rejected due to busy */ |
| OI_STATUS_ALREADY_REGISTERED = |
| 119, /**< The registration has already been performed. */ |
| OI_STATUS_NOT_FOUND = 120, /**< The referenced resource was not found. */ |
| OI_STATUS_NOT_REGISTERED = 121, /**< not registered */ |
| OI_STATUS_NOT_CONNECTED = 122, /**< not connected */ |
| OI_CALLBACK_FUNCTION_REQUIRED = |
| 123, /**< A callback function parameter was required. */ |
| OI_STATUS_MBUF_OVERFLOW = |
| 124, /**< There is no room to add another buffer to an mbuf. */ |
| OI_STATUS_MBUF_UNDERFLOW = |
| 125, /**< There was an attempt to pull too many bytes from an mbuf. */ |
| OI_STATUS_CONNECTION_EXISTS = 126, /**< connection exists */ |
| OI_STATUS_NOT_CONFIGURED = 127, /**< module not configured */ |
| OI_LOWER_STACK_ERROR = 128, /**< An error was reported by lower stack API. |
| This is used for embedded platforms. */ |
| OI_STATUS_RESET_IN_PROGRESS = |
| 129, /**< Request failed/rejected because we're busy resetting. */ |
| OI_STATUS_ACCESS_DENIED = 130, /**< Generic access denied error. */ |
| OI_STATUS_DATA_ERROR = 131, /**< Generic data error. */ |
| OI_STATUS_INVALID_ROLE = 132, /**< The requested role was invalid. */ |
| OI_STATUS_ALREADY_CONNECTED = |
| 133, /**< The requested connection is already established. */ |
| OI_STATUS_PARSE_ERROR = 134, /**< Parse error */ |
| OI_STATUS_END_OF_FILE = 135, /**< End of file */ |
| OI_STATUS_READ_ERROR = 136, /**< Generic read error */ |
| OI_STATUS_WRITE_ERROR = 137, /**< Generic write error */ |
| OI_STATUS_NEGOTIATION_FAILURE = 138, /**< Error in negotiation */ |
| OI_STATUS_READ_IN_PROGRESS = 139, /**< A read is already in progress */ |
| OI_STATUS_ALREADY_INITIALIZED = |
| 140, /**< Initialization has already been done */ |
| OI_STATUS_STILL_CONNECTED = 141, /**< The service cannot be shutdown because |
| there are still active connections. */ |
| OI_STATUS_MTU_EXCEEDED = 142, /**< The packet is too big */ |
| OI_STATUS_LINK_TERMINATED = 143, /**< The link was terminated */ |
| OI_STATUS_PIN_CODE_TOO_LONG = |
| 144, /**< Application gave us a pin code that is too long */ |
| OI_STATUS_STILL_REGISTERED = |
| 145, /**< The service cannot be shutdown because there are still active |
| registrations. */ |
| OI_STATUS_SPEC_VIOLATION = |
| 146, /**< Some application behavior contrary to BT specifications */ |
| |
| OI_STATUS_PSM_ALREADY_REGISTERED = |
| 402, /**< L2CAP: The specified PSM has already been registered. */ |
| OI_STATUS_INVALID_CID = 403, /**< L2CAP: CID is invalid or no longer valid |
| (connection terminated) */ |
| OI_STATUS_CID_NOT_FOUND = |
| 404, /**< L2CAP: CID does not represent a current connection */ |
| OI_STATUS_CHANNEL_NOT_FOUND = |
| 406, /**< L2CAP: CID does not represent a current connection */ |
| OI_STATUS_PSM_NOT_FOUND = 407, /**< L2CAP: PSM not found */ |
| OI_STATUS_INVALID_STATE = 408, /**< L2CAP: invalid state */ |
| OI_STATUS_WRITE_IN_PROGRESS = 410, /**< L2CAP: write in progress */ |
| OI_STATUS_INVALID_PACKET = 411, /**< L2CAP: invalid packet */ |
| OI_STATUS_SEND_COMPLETE = 412, /**< L2CAP: send is complete */ |
| OI_STATUS_INVALID_HANDLE = 414, /**< L2CAP: handle is invalid */ |
| OI_STATUS_GROUP_FULL = |
| 418, /**< L2CAP: No more members can be added to the specified group. */ |
| OI_STATUS_DEVICE_ALREADY_IN_GROUP = |
| 423, /**< L2CAP: The device already exists in the group. */ |
| OI_STATUS_DUPLICATE_GROUP = |
| 425, /**< L2CAP: attempt to add more than one group */ |
| OI_STATUS_EMPTY_GROUP = 426, /**< L2CAP: group is empty */ |
| OI_STATUS_PACKET_NOT_FOUND = 427, /**< L2CAP: packet not found */ |
| OI_STATUS_BUFFER_TOO_SMALL = 428, /**< L2CAP: The buffer size is too small. */ |
| OI_STATUS_IDENTIFIER_NOT_FOUND = 429, /**< L2CAP: identifier not found */ |
| |
| OI_L2CAP_DISCONNECT_LOWER_LAYER = |
| 430, /**< L2CAP: The lower level forced a disconnect. */ |
| OI_L2CAP_DISCONNECT_REMOTE_REQUEST = |
| 431, /**< L2CAP: The remote device requested a disconnect. */ |
| OI_L2CAP_GROUP_ADD_CONNECT_FAIL = 433, /**< L2CAP: Group add connect faiL */ |
| OI_L2CAP_GROUP_REMOVE_FAILURE = 434, /**< L2CAP: Group remove failure */ |
| OI_L2CAP_DATA_WRITE_ERROR_LINK_TERM = |
| 435, /**< L2CAP: Data write error LINK_TERM */ |
| OI_L2CAP_DISCONNECT_LOCAL_REQUEST = |
| 436, /**< L2CAP: Disconnect local request */ |
| |
| OI_L2CAP_CONNECT_TIMEOUT = 437, /**< L2CAP: Connect timeout */ |
| OI_L2CAP_DISCONNECT_TIMEOUT = 439, /**< L2CAP: Disconnect timeout */ |
| OI_L2CAP_PING_TIMEOUT = 440, /**< L2CAP: Ping timeout */ |
| OI_L2CAP_GET_INFO_TIMEOUT = 441, /**< L2CAP: Get info timeout */ |
| OI_L2CAP_INVALID_ADDRESS = 444, /**< L2CAP: Invalid address */ |
| OI_L2CAP_CMD_REJECT_RCVD = |
| 445, /**< L2CAP: remote sent us 'command reject' response */ |
| |
| OI_L2CAP_CONNECT_BASE = 450, /**< L2CAP: Connect base */ |
| OI_L2CAP_CONNECT_PENDING = 451, /**< L2CAP: Connect pending */ |
| OI_L2CAP_CONNECT_REFUSED_INVALID_PSM = |
| 452, /**< L2CAP: Connect refused invalid PSM */ |
| OI_L2CAP_CONNECT_REFUSED_SECURITY = |
| 453, /**< L2CAP: Connect refused security */ |
| OI_L2CAP_CONNECT_REFUSED_NO_RESOURCES = |
| 454, /**< L2CAP: Connect refused no resources */ |
| |
| OI_L2CAP_CONFIG_BASE = 460, /**< L2CAP: Config base */ |
| OI_L2CAP_CONFIG_FAIL_INVALID_PARAMETERS = |
| 461, /**< L2CAP: Config fail invalid parameters */ |
| OI_L2CAP_CONFIG_FAIL_NO_REASON = 462, /**< L2CAP: Config fail no reason */ |
| OI_L2CAP_CONFIG_FAIL_UNKNOWN_OPTIONS = |
| 463, /**< L2CAP: Config fail unknown options */ |
| |
| OI_L2CAP_GET_INFO_BASE = 470, /**< L2CAP: Get info base */ |
| OI_L2CAP_GET_INFO_NOT_SUPPORTED = 471, /**< L2CAP: Get info not supported */ |
| OI_L2CAP_MTU_EXCEEDED = |
| 472, /**< L2CAP: The MTU of the channel was exceeded */ |
| OI_L2CAP_INVALID_PSM = 482, /**< L2CAP: Invalid PSM */ |
| OI_L2CAP_INVALID_MTU = 483, /**< L2CAP: Invalid MTU */ |
| OI_L2CAP_INVALID_FLUSHTO = 484, /**< L2CAP: Invalid flush timeout */ |
| |
| OI_HCI_NO_SUCH_CONNECTION = |
| 601, /**< HCI: caller specified a non-existent connection handle */ |
| OI_HCI_CB_LIST_FULL = |
| 603, /**< HCI: callback list is full, cannot attempt to send command */ |
| OI_HCI_EVENT_UNDERRUN = |
| 605, /**< HCI: parsing event packet, premature end-of-parameters */ |
| OI_HCI_UNKNOWN_EVENT_CODE = |
| 607, /**< HCI: event received - event code is unknown */ |
| OI_HCI_BAD_EVENT_PARM_LEN = |
| 608, /**< HCI: event - parameter length is incorrect */ |
| OI_HCI_CMD_QUEUE_FULL = 611, /**< HCI: command queue is full */ |
| OI_HCI_SHORT_EVENT = |
| 612, /**< HCI: event received, missing event code and/or parm len */ |
| OI_HCI_TRANSMIT_NOT_READY = 613, /**< HCI: ACL/SCO transmit request failed - |
| busy or no buffers available */ |
| OI_HCI_ORPHAN_SENT_EVENT = |
| 614, /**< HCI: got spurious 'sent' event from transport layer */ |
| OI_HCI_CMD_TABLE_ERROR = |
| 615, /**< HCI: inconsistency in the internal command table */ |
| OI_HCI_UNKNOWN_CMD_ID = 616, /**< HCI: HciApi Command - unknown command id */ |
| OI_HCI_UNEXPECTED_EVENT = |
| 619, /**< HCI: event received which only occurs in response to our cmd */ |
| OI_HCI_EVENT_TABLE_ERROR = |
| 620, /**< HCI: inconsistency in the internal event table */ |
| OI_HCI_EXPECTED_EVENT_TIMOUT = |
| 621, /**< HCI: timed out waiting for an expected event */ |
| OI_HCI_NO_CMD_DESC_FOR_OPCODE = 622, /**< HCI: event opcode is not known */ |
| OI_HCI_INVALID_OPCODE_ERROR = 623, /**< HCI: command opcode is invalid */ |
| OI_HCI_FLOW_CONTROL_DISABLED = 624, /**< HCI: can not use host flow control |
| APIs if disabled in configuration */ |
| OI_HCI_TX_COMPLETE = |
| 625, /**< HCI: packet delivery to Host Controler complete */ |
| OI_HCI_TX_ERROR = 626, /**< HCI: failed to deliver packet to Host Controler */ |
| OI_HCI_DEVICE_NOT_INITIALIZED = 627, /**< HCI: commands from upper layers |
| disallowed until device is up and |
| running */ |
| OI_HCI_UNSUPPORTED_COMMAND = |
| 628, /**< HCI: command requested is not supported by local device */ |
| OI_HCI_PASSTHROUGH_ERROR = |
| 629, /**< HCI: Error processing passthrough command */ |
| OI_HCI_PASSTHROUGH_ALREADY_SET = |
| 630, /**< HCI: Passthrough mode already enabled */ |
| OI_HCI_RESET_FAILURE = 631, /**< HCI: failed to reset the device/baseband */ |
| OI_HCI_TRANSPORT_RESET = 632, /**< HCI: some operation failed because of a |
| reset in the transport */ |
| OI_HCIERR_HCIIFC_INIT_FAILURE = |
| 633, /**< HCI: failed to initialize transport layer interface */ |
| |
| OI_HCIERR_FIRST_ERROR_VALUE = 701, /**< marker for first HCI protocol error */ |
| OI_HCIERR_UNKNOWN_HCI_COMMAND = 701, /**< HCI: protocol error 0x01 */ |
| OI_HCIERR_NO_CONNECTION = 702, /**< HCI: protocol error 0x02 */ |
| OI_HCIERR_HARDWARE_FAILURE = 703, /**< HCI: protocol error 0x03 */ |
| OI_HCIERR_PAGE_TIMEOUT = 704, /**< HCI: protocol error 0x04 */ |
| OI_HCIERR_AUTHENTICATION_FAILURE = 705, /**< HCI: protocol error 0x05 */ |
| OI_HCIERR_KEY_MISSING = 706, /**< HCI: protocol error 0x06 */ |
| OI_HCIERR_MEMORY_FULL = 707, /**< HCI: protocol error 0x07 */ |
| OI_HCIERR_CONNECTION_TIMEOUT = 708, /**< HCI: protocol error 0x08 */ |
| OI_HCIERR_MAX_NUM_OF_CONNECTIONS = 709, /**< HCI: protocol error 0x09 */ |
| OI_HCIERR_MAX_NUM_OF_SCO_CONNECTIONS = 710, /**< HCI: protocol error 0x0A */ |
| OI_HCIERR_ACL_CONNECTION_ALREADY_EXISTS = |
| 711, /**< HCI: protocol error 0x0B */ |
| OI_HCIERR_COMMAND_DISALLOWED = 712, /**< HCI: protocol error 0x0C */ |
| OI_HCIERR_HOST_REJECTED_RESOURCES = 713, /**< HCI: protocol error 0x0D */ |
| OI_HCIERR_HOST_REJECTED_SECURITY = 714, /**< HCI: protocol error 0x0E */ |
| OI_HCIERR_HOST_REJECTED_PERSONAL_DEVICE = |
| 715, /**< HCI: protocol error 0x0F */ |
| OI_HCIERR_HOST_TIMEOUT = 716, /**< HCI: protocol error 0x10 */ |
| OI_HCIERR_UNSUPPORTED = 717, /**< HCI: protocol error 0x11 */ |
| OI_HCIERR_INVALID_PARAMETERS = 718, /**< HCI: protocol error 0x12 */ |
| OI_HCIERR_OTHER_END_USER_DISCONNECT = 719, /**< HCI: protocol error 0x13 */ |
| OI_HCIERR_OTHER_END_LOW_RESOURCES = 720, /**< HCI: protocol error 0x14 */ |
| OI_HCIERR_OTHER_END_POWERING_OFF = 721, /**< HCI: protocol error 0x15 */ |
| OI_HCIERR_CONNECTION_TERMINATED_LOCALLY = |
| 722, /**< HCI: protocol error 0x16 */ |
| OI_HCIERR_REPEATED_ATTEMPTS = 723, /**< HCI: protocol error 0x17 */ |
| OI_HCIERR_PAIRING_NOT_ALLOWED = 724, /**< HCI: protocol error 0x18 */ |
| OI_HCIERR_UNKNOWN_LMP_PDU = 725, /**< HCI: protocol error 0x19 */ |
| OI_HCIERR_UNSUPPORTED_REMOTE_FEATURE = 726, /**< HCI: protocol error 0x1A */ |
| OI_HCIERR_SCO_OFFSET_REJECTED = 727, /**< HCI: protocol error 0x1B */ |
| OI_HCIERR_SCO_INTERVAL_REJECTED = 728, /**< HCI: protocol error 0x1C */ |
| OI_HCIERR_SCO_AIR_MODE_REJECTED = 729, /**< HCI: protocol error 0x1D */ |
| OI_HCIERR_INVALID_LMP_PARMS = 730, /**< HCI: protocol error 0x1E */ |
| OI_HCIERR_UNSPECIFIED_ERROR = 731, /**< HCI: protocol error 0x1F */ |
| OI_HCIERR_UNSUPPORTED_LMP_PARAMETERS = 732, /**< HCI: protocol error 0x20 */ |
| OI_HCIERR_ROLE_CHANGE_NOT_ALLOWED = 733, /**< HCI: protocol error 0x21 */ |
| OI_HCIERR_LMP_RESPONSE_TIMEOUT = 734, /**< HCI: protocol error 0x22 */ |
| OI_HCIERR_LMP_ERROR_TRANS_COLLISION = 735, /**< HCI: protocol error 0x23 */ |
| OI_HCIERR_LMP_PDU_NOT_ALLOWED = 736, /**< HCI: protocol error 0x24 */ |
| OI_HCIERR_ENCRYPTION_MODE_NOT_ACCEPTABLE = |
| 737, /**< HCI: protocol error 0x25 */ |
| OI_HCIERR_UNIT_KEY_USED = 738, /**< HCI: protocol error 0x26 */ |
| OI_HCIERR_QOS_NOT_SUPPORTED = 739, /**< HCI: protocol error 0x27 */ |
| OI_HCIERR_INSTANT_PASSED = 740, /**< HCI: protocol error 0x28 */ |
| OI_HCIERR_UNIT_KEY_PAIRING_UNSUPPORTED = 741, /**< HCI: protocol error 0x29 */ |
| OI_HCIERR_DIFFERENT_TRANS_COLLISION = 742, /**< HCI: protocol error 0x2A */ |
| OI_HCIERR_RESERVED_2B = 743, /**< HCI: protocol error 0x2B */ |
| OI_HCIERR_QOS_UNACCEPTABLE_PARAMETER = 744, /**< HCI: protocol error 0x2C */ |
| OI_HCIERR_QOS_REJECTED = 745, /**< HCI: protocol error 0x2D */ |
| OI_HCIERR_CHANNEL_CLASSIFICATION_NS = 746, /**< HCI: protocol error 0x2E */ |
| OI_HCIERR_INSUFFICIENT_SECURITY = 747, /**< HCI: protocol error 0x2F */ |
| OI_HCIERR_PARM_OUT_OF_MANDATORY_RANGE = 748, /**< HCI: protocol error 0x30 */ |
| OI_HCIERR_RESERVED_31 = 749, /**< HCI: protocol error 0x31 */ |
| OI_HCIERR_ROLE_SWITCH_PENDING = 750, /**< HCI: protocol error 0x32 */ |
| OI_HCIERR_RESERVED_33 = 751, /**< HCI: protocol error 0x33 */ |
| OI_HCIERR_RESERVED_SLOT_VIOLATION = 752, /**< HCI: protocol error 0x34 */ |
| OI_HCIERR_ROLE_SWITCH_FAILED = 753, /**< HCI: protocol error 0x35 */ |
| OI_HCIERR_EIR_TOO_LARGE = 754, /**< HCI: protocol error 0x36 */ |
| OI_HCIERR_SSP_NOT_SUPPORTED_BY_HOST = 755, /**< HCI: protocol error 0x37 */ |
| OI_HCIERR_HOST_BUSY_PAIRING = 756, /**< HCI: protocol error 0x38 */ |
| |
| OI_HCIERR_UNKNOWN_ERROR = 757, /**< HCI: unknown error code */ |
| OI_HCIERR_LAST_ERROR_VALUE = 757, /**< marker for last HCI protocol error */ |
| |
| OI_SDP_SPEC_ERROR = 800, /**< SDP: Base error status for mapping OI_STATUS |
| codes to SDP errors */ |
| OI_SDP_INVALID_SERVICE_RECORD_HANDLE = |
| (OI_SDP_SPEC_ERROR + |
| 2), /**< SDP: protocol error Invalid Service Record Handle */ |
| OI_SDP_INVALID_REQUEST_SYNTAX = |
| (OI_SDP_SPEC_ERROR + |
| 3), /**< SDP: protocol error Invalid Request Syntax */ |
| OI_SDP_INVALID_PDU_SIZE = |
| (OI_SDP_SPEC_ERROR + 4), /**< SDP: protocol error Invalid PDU Size */ |
| OI_SDP_INVALID_CONTINUATION_STATE = |
| (OI_SDP_SPEC_ERROR + |
| 5), /**< SDP: protocol error Invalid Continuation State */ |
| OI_SDP_INSUFFICIENT_RESOURCES = |
| (OI_SDP_SPEC_ERROR + |
| 6), /**< SDP: protocol error Insufficient Resources */ |
| OI_SDP_ERROR = 807, /**< SDP: server returned an error code */ |
| OI_SDP_CORRUPT_DATA_ELEMENT = |
| 808, /**< SDP: Invalid or corrupt data element representation */ |
| OI_SDP_SERVER_NOT_CONNECTED = |
| 810, /**< SDP: Attempt to disconnect from an unconnected server */ |
| OI_SDP_ACCESS_DENIED = 811, /**< SDP: Server denied access to server */ |
| OI_SDP_ATTRIBUTES_OUT_OF_ORDER = |
| 812, /**< SDP: Attributes in attribute list not in ascending order */ |
| OI_SDP_DEVICE_DOES_NOT_SUPPORT_SDP = |
| 813, /**< SDP: Tried to connect to a device that does not support SDP */ |
| OI_SDP_NO_MORE_DATA = |
| 815, /**< SDP: Server does not have more continuation data */ |
| OI_SDP_REQUEST_PARAMS_TOO_LONG = |
| 816, /**< SDP: Parameters for a request exceed the L2CAP buffer size */ |
| OI_SDP_REQUEST_PENDING = 817, /**< SDP: Cannot make a request when another |
| request is being processed */ |
| OI_SDP_SERVER_CONNECT_FAILED = |
| 819, /**< SDP: Failed attempt to connect to an SDP server */ |
| OI_SDP_SERVER_TOO_MANY_CONNECTIONS = |
| 821, /**< SDP: Exceeded maximum number of simultaneous server connections |
| */ |
| OI_SDP_NO_MATCHING_SERVICE_RECORD = |
| 823, /**< SDP: No service record matched the UUID list */ |
| OI_SDP_PARTIAL_RESPONSE = 824, /**< SDP: Internal use only */ |
| OI_SDP_ILLEGAL_ARGUMENT = |
| 825, /**< SDP: Illegal argument passed to an SDP function */ |
| OI_SDP_ATTRIBUTE_NOT_FOUND = |
| 826, /**< SDP: A requested attribute was not found in a service record */ |
| OI_SDP_DATABASE_OUT_OF_RESOURCES = |
| 827, /**< SDP: server database is out of memory */ |
| OI_SDP_SHORT_PDU = 829, /**< SDP: Not enough bytes in the packet */ |
| OI_SDP_TRANSACTION_ID_MISMATCH = |
| 830, /**< SDP: Transaction Id was not as expected */ |
| OI_SDP_UNEXPECTED_RESPONSE_PDU_ID = |
| 831, /**< SDP: Did not expect this response PDU */ |
| OI_SDP_REQUEST_TIMEOUT = |
| 832, /**< SDP: Did not get a response within the timeout period */ |
| OI_SDP_INVALID_RESPONSE_SYNTAX = |
| 833, /**< SDP: Response is not correctly formatted */ |
| OI_SDP_CONNECTION_TIMEOUT = |
| 834, /**< SDP: Connection attempt timed out at a lower layer */ |
| OI_SDP_RESPONSE_DATA_ERROR = |
| 835, /**< SDP: Response to a service request appears to be corrupt */ |
| OI_SDP_TOO_MANY_ATTRIBUTE_BYTES = |
| 836, /**< SDP: Response contained more bytes than requested. */ |
| OI_SDP_TOO_MANY_SERVICE_RECORDS = |
| 837, /**< SDP: Response contained more service records than requested. */ |
| OI_SDP_INVALID_CONNECTION_ID = |
| 838, /**< SDP: Invalid connection ID in an SDP request */ |
| OI_SDP_CANNOT_SET_ATTRIBUTE = |
| 839, /**< SDP: Attempt to set a dynamic attribute value failed */ |
| OI_SDP_BADLY_FORMED_ATTRIBUTE_VALUE = |
| 840, /**< SDP: An attribute value has the wrong type or structure */ |
| OI_SDP_NO_ATTRIBUTE_LIST_TO_REMOVE = |
| 841, /**< SDP: Attempt to remove a non-existent attribute list from a |
| service record */ |
| OI_SDP_ATTRIBUTE_LIST_ALREADY_ADDED = 842, /**< SDP: An attribute list has |
| already been added to the |
| service record */ |
| OI_SDP_DATA_ELEMENT_TRUNCATED = |
| 843, /**< SDP: Data element truncated (too few bytes) */ |
| |
| OI_RFCOMM_WRITE_IN_PROGRESS = 901, /**< RFCOMM: Write in progress */ |
| OI_RFCOMM_INVALID_BAUDRATE = 903, /**< RFCOMM: Invalid baudrate */ |
| OI_RFCOMM_INVALID_DATABIT = 904, /**< RFCOMM: Invalid databit */ |
| OI_RFCOMM_INVALID_STOPBIT = 905, /**< RFCOMM: Invalid stopbit */ |
| OI_RFCOMM_INVALID_PARITY = 906, /**< RFCOMM: Invalid parity */ |
| OI_RFCOMM_INVALID_PARITYTYPE = 907, /**< RFCOMM: Invalid paritytype */ |
| OI_RFCOMM_INVALID_FLOWCONTROL = 908, /**< RFCOMM: Invalid flowcontrol */ |
| OI_RFCOMM_SESSION_EXISTS = 909, /**< RFCOMM: Session exists */ |
| OI_RFCOMM_INVALID_CHANNEL = 910, /**< RFCOMM: Invalid channel */ |
| OI_RFCOMM_DLCI_EXISTS = 911, /**< RFCOMM: DLCI exists */ |
| OI_RFCOMM_LINK_NOT_FOUND = 912, /**< RFCOMM: Link not found */ |
| OI_RFCOMM_REMOTE_REJECT = 913, /**< RFCOMM: Remote reject */ |
| OI_RFCOMM_TEST_IN_PROGRESS = 915, /**< RFCOMM: Test in progress */ |
| OI_RFCOMM_SESSION_NOT_FOUND = 916, /**< RFCOMM: Session not found */ |
| OI_RFCOMM_INVALID_PACKET = 917, /**< RFCOMM: Invalid packet */ |
| OI_RFCOMM_FRAMESIZE_EXCEEDED = 918, /**< RFCOMM: Framesize exceeded */ |
| OI_RFCOMM_INVALID_DLCI = 920, /**< RFCOMM: Invalid dlci */ |
| OI_RFCOMM_SERVER_NOT_REGISTERED = 921, /**< RFCOMM: Server not registered */ |
| OI_RFCOMM_CREDIT_ERROR = 922, /**< RFCOMM: Credit error */ |
| OI_RFCOMM_NO_CHANNEL_NUMBER = 923, /**< RFCOMM: No channel number */ |
| OI_RFCOMM_QUERY_IN_PROGRESS = 924, /**< RFCOMM: Query in progress */ |
| OI_RFCOMM_SESSION_SHUTDOWN = 925, /**< RFCOMM: Session shutdown */ |
| OI_RFCOMM_LOCAL_DEVICE_DISCONNECTED = |
| 926, /**< RFCOMM: Local device disconnected */ |
| OI_RFCOMM_REMOTE_DEVICE_DISCONNECTED = |
| 927, /**< RFCOMM: Remote device disconnected */ |
| OI_RFCOMM_OUT_OF_SERVER_CHANNELS = 928, /**< RFCOMM: Out of server channels */ |
| |
| OI_DISPATCH_INVALID_CB_HANDLE = |
| 1001, /**< Dispatcher was handed an invalid callback handle */ |
| OI_DISPATCH_TABLE_OVERFLOW = 1002, /**< Dispatcher table is full */ |
| |
| OI_TEST_UNKNOWN_TEST = 1101, /**< TEST: Unknown test */ |
| OI_TEST_FAIL = 1102, /**< TEST: Fail */ |
| |
| OI_HCITRANS_CANNOT_CONNECT_TO_DEVICE = |
| 1201, /**< TRANSPORT: Cannot connect to device */ |
| OI_HCITRANS_BUFFER_TOO_SMALL = 1203, /**< TRANSPORT: Buffer too small */ |
| OI_HCITRANS_NULL_DEVICE_HANDLE = 1204, /**< TRANSPORT: Null device handle */ |
| OI_HCITRANS_IO_ERROR = 1205, /**< TRANSPORT: IO error */ |
| OI_HCITRANS_DEVICE_NOT_READY = 1206, /**< TRANSPORT: Device not ready */ |
| OI_HCITRANS_FUNCTION_NOT_SUPPORTED = |
| 1207, /**< TRANSPORT: Function not supporteD */ |
| OI_HCITRANS_ACCESS_DENIED = 1209, /**< TRANSPORT: win32 */ |
| OI_HCITRANS_ACL_DATA_ERROR = 1210, /**< TRANSPORT: ACL data error */ |
| OI_HCITRANS_SCO_DATA_ERROR = 1211, /**< TRANSPORT: SCO data error */ |
| OI_HCITRANS_EVENT_DATA_ERROR = 1212, /**< TRANSPORT: HCI event data error */ |
| OI_HCITRANS_INTERNAL_ERROR = |
| 1214, /**< TRANSPORT: Internal error in the transport */ |
| OI_HCITRANS_LINK_NOT_ACTIVE = |
| 1215, /**< TRANSPORT: Link to the device is not currently active */ |
| OI_HCITRANS_INITIALIZING = 1216, /**< TRANSPORT: Transport is initializing */ |
| |
| OI_DEVMGR_NO_CONNECTION = 1301, /**< DEVMGR: No connection */ |
| OI_DEVMGR_HARDWARE_ERROR = 1305, /**< DEVMGR: error reported by HCI */ |
| OI_DEVMGR_PENDING_CONNECT_LIST_FULL = |
| 1307, /**< DEVMGR: Pending connect list full */ |
| OI_DEVMGR_CONNECTION_LIST_FULL = 1309, /**< DEVMGR: Connection list full */ |
| OI_DEVMGR_NO_SUCH_CONNECTION = 1310, /**< DEVMGR: No such connection */ |
| OI_DEVMGR_INQUIRY_IN_PROGRESS = 1311, /**< DEVMGR: Inquiry in progress */ |
| OI_DEVMGR_PERIODIC_INQUIRY_ACTIVE = |
| 1312, /**< DEVMGR: Periodic inquiry active */ |
| OI_DEVMGR_NO_INQUIRIES_ACTIVE = |
| 1313, /**< DEVMGR: can not cancel/exit if not active */ |
| OI_DEVMGR_DUPLICATE_CONNECTION = 1314, /**< DEVMGR: internal error */ |
| OI_DEVMGR_DUPLICATE_EVENT_CALLBACK = |
| 1316, /**< DEVMGR: attempt to register same callback twice */ |
| OI_DEVMGR_EVENT_CALLBACK_LIST_FULL = |
| 1317, /**< DEVMGR: can not register event callback, list is full */ |
| OI_DEVMGR_EVENT_CALLBACK_NOT_FOUND = |
| 1318, /**< DEVMGR: attempt to unregister callback failed */ |
| OI_DEVMGR_BUSY = |
| 1319, /**< DEVMGR: some operations can only execute one at a time */ |
| OI_DEVMGR_ENUM_UNEXPECTED_INQ_COMPLETE = 1320, /**< DEVMGR: inquiry complete |
| event in inappropriate |
| enumeration state */ |
| OI_DEVMGR_ENUM_UNEXPECTED_INQ_RESULT = 1321, /**< DEVMGR: inquiry result event |
| in inappropriate enumeration |
| state */ |
| OI_DEVMGR_ENUM_DATABASE_FULL = |
| 1322, /**< DEVMGR: device enumeration, database is full, couldn't add a |
| new device */ |
| OI_DEVMGR_ENUM_INQUIRIES_OVERLAP = 1323, /**< DEVMGR: device enumeration, |
| periodic inquiries occurring too |
| close together */ |
| OI_DEVMGR_UNKNOWN_LINK_TYPE = |
| 1324, /**< DEVMGR: HCI connect request with unkown link type */ |
| OI_DEVMGR_PARAM_IO_ACTIVE = 1325, /**< DEVMGR: request for parameter |
| read/write while param read/write active |
| */ |
| OI_DEVMGR_UNKNOWN_IAC_LAP = 1326, /**< DEVMGR: unrecognized IAC LAP */ |
| OI_DEVMGR_SCO_ALREADY_REGISTERED = |
| 1327, /**< DEVMGR: only one application can use SCO */ |
| OI_DEVMGR_SCO_NOT_REGISTERED = |
| 1328, /**< DEVMGR: SCO applications must register before using the API */ |
| OI_DEVMGR_SCO_WITHOUT_ACL = |
| 1329, /**< DEVMGR: Got SCO connection but there is no underlying ACL |
| connection */ |
| OI_DEVMGR_NO_SUPPORT = |
| 1330, /**< DEVMGR: Request is not supported by the device */ |
| OI_DEVMGR_WRITE_POLICY_FAILED = 1331, /**< DEVMGR: connection attempt failed - |
| unable to write link policy */ |
| OI_DEVMGR_NOT_IN_MASTER_MODE = 1332, /**< DEVMGR: OI_DEVMGR EndMasterMode |
| without prior |
| OI_DEVMGR_BeginMasterMode */ |
| OI_DEVMGR_POLICY_VIOLATION = |
| 1333, /**< DEVMGR: low-power request is rejected - link policy does not |
| allow it */ |
| OI_DEVMGR_BUSY_TIMEOUT = 1334, /**< DEVMGR: queued operation timed out while |
| in the queue; \n |
| timeout configurable via @ref OI_CONFIG_DEVMGR::connectQueueTimeoutSecs |
| "connectQueueTimeoutSecs" */ |
| OI_DEVMGR_REENCRYPT_FAILED = |
| 1335, /**< DEVMGR: failed to re-encrypt link after role switch */ |
| OI_DEVMGR_ROLE_POLICY_CONFLICT = |
| 1336, /**< DEVMGR: requested role conflicts with current policy */ |
| OI_DEVMGR_BAD_INTERVAL = 1337, /**< DEVMGR: current linkTO outside range of |
| requested min/max interval */ |
| OI_DEVMGR_INVALID_SCO_HANDLE = |
| 1338, /**< DEVMGR: HCI SCO event, invalid handle */ |
| OI_DEVMGR_CONNECTION_OVERLAP = 1339, /**< DEVMGR: Connection failed due to |
| race condition with remote side */ |
| OI_DEVMGR_ORPHAN_SUBRATE_COMPLETE = |
| 1340, /**< DEVMGR: sniff subrate complete, but no callback */ |
| OI_DEVMGR_EIR_RESPONSE_2_LARGE = |
| 1341, /**< DEVMGR: eir builder, response length would exceed spec max */ |
| |
| OI_SECMGR_NO_POLICY = |
| 1401, /**< SECMGR: no security policy has been established */ |
| OI_SECMGR_INTERNAL_ERROR = 1402, /**< SECMGR: internal inconsistency */ |
| OI_SECMGR_ORPHANED_CALLBACK = |
| 1403, /**< SECMGR: we've been called back, but CB context is gone */ |
| OI_SECMGR_BUSY = |
| 1404, /**< SECMGR: configure and access request cannot be concurrent */ |
| OI_SECMGR_DEVICE_NOT_TRUSTED = |
| 1405, /**< SECMGR: l2cap access denied - device is not trusted */ |
| OI_SECMGR_DEVICE_ENCRYPT_FAIL = |
| 1407, /**< SECMGR: l2cap access denied - failed to start encryption */ |
| OI_SECMGR_DISCONNECTED_FAIL = |
| 1408, /**< SECMGR: l2cap access denied - disconnected */ |
| OI_SECMGR_ACCESS_PENDING = |
| 1409, /**< SECMGR: l2cap access request is still pending */ |
| OI_SECMGR_PIN_CODE_TOO_SHORT = |
| 1410, /**< SECMGR: Higher-layer process gave us a pin code that is too |
| short */ |
| OI_SECMGR_UNKNOWN_ENCRYPT_VALUE = 1411, /**< SECMGR: got EncryptionChange |
| event, unknown encryption enable |
| value */ |
| OI_SECMGR_INVALID_POLICY = 1412, /**< SECMGR: the specified security policy is |
| not valid for security mode */ |
| OI_SECMGR_AUTHORIZATION_FAILED = |
| 1413, /**< SECMGR: device authorization failed */ |
| OI_SECMGR_ENCRYPTION_FAILED = 1414, /**< SECMGR: device encryption failed */ |
| OI_SECMGR_UNIT_KEY_UNSUPPORTED = |
| 1415, /**< SECMGR: authentication failed due to non-support of unit keys |
| */ |
| OI_SECMGR_NOT_REGISTERED = |
| 1416, /**< SECMGR: required registrations have not yet occurred */ |
| OI_SECMGR_ILLEGAL_WRITE_SSP_MODE = |
| 1417, /**< SECMGR: 2.1 HCI spec does not allow SSP mode to be disabled */ |
| OI_SECMGR_INVALID_SEC_LEVEL = |
| 1418, /**< SECMGR: security level for a service is not a valid value */ |
| OI_SECMGR_INSUFFICIENT_LINK_KEY = 1419, /**< SECMGR: link key type is not |
| sufficient to meet service |
| requirements */ |
| OI_SECMGR_INVALID_KEY_TYPE = |
| 1420, /**< SECMGR: link key type is not a valid value */ |
| OI_SECMGR_SSP_NOT_ENCRYPTED = |
| 1421, /**< SECMGR: ssp required encryption on incoming link */ |
| OI_SECMGR_ORPHAN_EVENT = 1422, /**< SECMGR: some HCI security event unrelated |
| to current processes */ |
| OI_SECMGR_NOT_BONDABLE = 1423, /**< SECMGR: not in bondable mode */ |
| |
| OI_TCS_INVALID_ELEMENT_TYPE = 1602, /**< TCS: element type is invalid */ |
| OI_TCS_INVALID_PACKET = 1603, /**< TCS: packet is invalide */ |
| OI_TCS_CALL_IN_PROGRESS = 1604, /**< TCS: call is in progress */ |
| OI_TCS_NO_CALL_IN_PROGRESS = 1605, /**< TCS: no call in progress */ |
| |
| OI_OBEX_CONTINUE = 1701, /**< OBEX: Continue processing OBEX request */ |
| OI_OBEX_COMMAND_ERROR = |
| 1702, /**< OBEX: An unrecognized OBEX command opcode */ |
| OI_OBEX_CONNECTION_TIMEOUT = |
| 1703, /**< OBEX: Timeout waiting for a response to a request */ |
| OI_OBEX_CONNECT_FAILED = |
| 1704, /**< OBEX: An OBEX connection request did not succeed */ |
| OI_OBEX_DISCONNECT_FAILED = 1705, /**< OBEX: A disconnect failed probably |
| because the connection did not exist */ |
| OI_OBEX_ERROR = 1706, /**< OBEX: Unspecified OBEX error */ |
| OI_OBEX_INCOMPLETE_PACKET = 1707, /**< OBEX: Packet too short or corrupt */ |
| OI_OBEX_LENGTH_REQUIRED = |
| 1708, /**< OBEX: Length header required in OBEX command */ |
| OI_OBEX_NOT_CONNECTED = 1709, /**< OBEX: No connection to OBEX server */ |
| OI_OBEX_NO_MORE_CONNECTIONS = |
| 1710, /**< OBEX: Reached max connections limit */ |
| OI_OBEX_OPERATION_IN_PROGRESS = |
| 1711, /**< OBEX: Another operation is still in progress on a connection */ |
| OI_OBEX_PUT_RESPONSE_ERROR = |
| 1712, /**< OBEX: An error in the response to a PUT command */ |
| OI_OBEX_GET_RESPONSE_ERROR = |
| 1713, /**< OBEX: An error in the response to a GET command */ |
| OI_OBEX_REQUIRED_HEADER_NOT_FOUND = |
| 1714, /**< OBEX: packet was missing a required header */ |
| OI_OBEX_SERVICE_UNAVAILABLE = |
| 1715, /**< OBEX: Unown OBEX target or required service */ |
| OI_OBEX_TOO_MANY_HEADER_BYTES = |
| 1716, /**< OBEX: Headers will not fit in single OBEX packet */ |
| OI_OBEX_UNKNOWN_COMMAND = 1717, /**< OBEX: Unrecognized OBEX command */ |
| OI_OBEX_UNSUPPORTED_VERSION = 1718, /**< OBEX: Version mismatch */ |
| OI_OBEX_CLIENT_ABORTED_COMMAND = |
| 1719, /**< OBEX: server received abort command */ |
| OI_OBEX_BAD_PACKET = 1720, /**< OBEX: Any malformed OBEX packet */ |
| OI_OBEX_BAD_REQUEST = |
| 1721, /**< OBEX: Maps to OBEX response of the same name */ |
| OI_OBEX_OBJECT_OVERFLOW = 1723, /**< OBEX: Too many bytes received. */ |
| OI_OBEX_NOT_FOUND = 1724, /**< OBEX: Maps to obex response of same name */ |
| OI_OBEX_ACCESS_DENIED = |
| 1735, /**< OBEX: Object could not be read or written. */ |
| OI_OBEX_VALUE_NOT_ACCEPTABLE = |
| 1736, /**< OBEX: Value in a command was not in the acceptable range. */ |
| OI_OBEX_PACKET_OVERFLOW = |
| 1737, /**< OBEX: Buffer will not fit in a single OBEX packet. */ |
| OI_OBEX_NO_SUCH_FOLDER = |
| 1738, /**< OBEX: Error returned by a setpath operation. */ |
| OI_OBEX_NAME_REQUIRED = |
| 1739, /**< OBEX: Name must be non-null and non-empty. */ |
| OI_OBEX_PASSWORD_TOO_LONG = |
| 1740, /**< OBEX: Password exceeds implementation imposed length limit. */ |
| OI_OBEX_PRECONDITION_FAILED = 1741, /**< OBEX: response Precondition Failed */ |
| OI_OBEX_UNAUTHORIZED = 1742, /**< OBEX: authentication was not successful. */ |
| OI_OBEX_NOT_IMPLEMENTED = 1743, /**< OBEX: Unimplemented feature. */ |
| OI_OBEX_INVALID_AUTH_DIGEST = |
| 1744, /**< OBEX: An authentication digest was bad. */ |
| OI_OBEX_INVALID_OPERATION = |
| 1745, /**< OBEX: Operation not allowed at this time. */ |
| OI_OBEX_DATABASE_FULL = 1746, /**< OBEX: Sync database full. */ |
| OI_OBEX_DATABASE_LOCKED = 1747, /**< OBEX: Sync database locked. */ |
| OI_OBEX_INTERNAL_SERVER_ERROR = |
| 1748, /**< OBEX: response Internal Server Error */ |
| OI_OBEX_UNSUPPORTED_MEDIA_TYPE = |
| 1749, /**< OBEX: response Unsupported Media Type */ |
| OI_OBEX_PARTIAL_CONTENT = 1750, /**< OBEX: response Partial Content */ |
| OI_OBEX_METHOD_NOT_ALLOWED = 1751, /**< OBEX: response Method Not Allowed */ |
| OI_OBEXSRV_INCOMPLETE_GET = 1752, /**< OBEX: Indicates to a GET handler that |
| the request phase is still in progress */ |
| OI_OBEX_FOLDER_BROWSING_NOT_ALLOWED = 1753, /**< OBEX: Indicates that an FTP |
| server does not allow folder |
| browsing */ |
| OI_OBEX_SERVER_FORCED_DISCONNECT = |
| 1754, /**< OBEX: connection was forcibly terminated by the server */ |
| OI_OBEX_OFS_ERROR = 1755, /**< OBEX: OPP object file system error occurred */ |
| OI_OBEX_FILEOP_ERROR = |
| 1756, /**< OBEX: FTP/PBAP file operation system error occurred */ |
| OI_OBEX_USERID_TOO_LONG = |
| 1757, /**< OBEX: User Id exceeds spec limited length limit. */ |
| |
| OI_HANDSFREE_EVENT_REPORTING_DISABLED = |
| 1801, /**< HANDSFREE: Event reporting disabled */ |
| OI_HANDSFREE_NOT_CONNECTED = 1802, /**< HANDSFREE: Not connected */ |
| OI_HANDSFREE_SERVICE_NOT_STARTED = 1803, /**< HANDSFREE: Cannot connect to |
| handsfree AG if handsfree service |
| not started */ |
| OI_HANDSFREE_AG_SERVICE_NOT_STARTED = |
| 1804, /**< HANDSFREE: Cannot connect to handsfree device if handsfree AG |
| service not started */ |
| OI_HANDSFREE_COMMAND_IN_PROGRESS = |
| 1805, /**< HANDSFREE: Cannot accept a command at this time */ |
| OI_HANDSFREE_AUDIO_ALREADY_CONNECTED = |
| 1806, /**< HANDSFREE: Audio is already connected */ |
| OI_HANDSFREE_AUDIO_NOT_CONNECTED = |
| 1807, /**< HANDSFREE: Audio is not connected */ |
| OI_HANDSFREE_FEATURE_NOT_SUPPORTED = 1808, /**< HANDSFREE: Local or remote |
| feature not supported for |
| requested command */ |
| |
| OI_HEADSET_SERVICE_NOT_STARTED = |
| 1901, /**< HEADSET: Cannot connect to headset AG if headset service not |
| started */ |
| OI_HEADSET_AG_SERVICE_NOT_STARTED = 1902, /**< HEADSET: Cannot connect to |
| headset device if headset AG |
| service not started */ |
| OI_HEADSET_COMMAND_IN_PROGRESS = |
| 1903, /**< HEADSET: Cannot accept a command at this time */ |
| |
| OI_BNEP_INVALID_MTU = |
| 2001, /**< BNEP: The remote device cannot support the minimum BNEP MTU */ |
| OI_BNEP_SETUP_TIMEOUT = 2002, /**< BNEP: The setup request timed out. */ |
| OI_BNEP_SERVICE_NOT_REGISTERED = |
| 2003, /**< BNEP: The requested service was not found. */ |
| OI_BNEP_INVALID_HANDLE = |
| 2004, /**< BNEP: The specified connection handle is not valid. */ |
| OI_BNEP_RESPONSE_TIMEOUT = |
| 2005, /**< BNEP: The timer for receiving a response has expired. */ |
| OI_BNEP_INVALID_CONNECTION = 2006, /**< BNEP: Invalid connection */ |
| OI_BNEP_INVALID_FILTER = 2007, /**< BNEP: The supplied filter was invalid. */ |
| OI_BNEP_CONNECTION_EXISTS = |
| 2008, /**< BNEP: An attempt was made to create a duplicate connection. */ |
| OI_BNEP_NOT_INITIALIZED = 2009, /**< BNEP: Init has not been called */ |
| OI_BNEP_CONNECT_BASE = 2010, /**< BNEP: connection response codes */ |
| OI_BNEP_CONNECT_FAILED_INVALID_DEST_UUID = |
| 2011, /**< BNEP: connect response code Invalid Dest UUID */ |
| OI_BNEP_CONNECT_FAILED_INVALID_SOURCE_UUID = |
| 2012, /**< BNEP: connect response code Invalid Source UUID */ |
| OI_BNEP_CONNECT_FAILED_INVALID_UUID_SIZE = |
| 2013, /**< BNEP: connect response code Invalid UUID Size */ |
| OI_BNEP_CONNECT_FAILED_NOT_ALLOWED = |
| 2014, /**< BNEP: connect response code Not Allowed */ |
| OI_BNEP_FILTER_NET_BASE = 2020, /**< BNEP: filter response codes */ |
| OI_BNEP_FILTER_NET_UNSUPPORTED_REQUEST = |
| 2021, /**< BNEP: filter response code Unsupported Request */ |
| OI_BNEP_FILTER_NET_FAILED_INVALID_PROTOCOL_TYPE = |
| 2022, /**< BNEP: filter response code Invalid Protocol Type */ |
| OI_BNEP_FILTER_NET_FAILED_MAX_LIMIT_REACHED = |
| 2023, /**< BNEP: filter response code Max Limit Reached */ |
| OI_BNEP_FILTER_NET_FAILED_SECURITY = |
| 2024, /**< BNEP: filter response code Security */ |
| OI_BNEP_FILTER_MULTI_BASE = 2030, /**< BNEP: multicast response codes */ |
| OI_BNEP_FILTER_MULTI_UNSUPPORTED_REQUEST = |
| 2031, /**< BNEP: multicast response code Unsupported Request */ |
| OI_BNEP_FILTER_MULTI_FAILED_INVALID_ADDRESS = |
| 2032, /**< BNEP: multicast response code Invalid Address */ |
| OI_BNEP_FILTER_MULTI_FAILED_MAX_LIMIT_REACHED = |
| 2033, /**< BNEP: multicast response code Max Limit Reached */ |
| OI_BNEP_FILTER_MULTI_FAILED_SECURITY = |
| 2034, /**< BNEP: multicast response code Security */ |
| OI_BNEP_LOCAL_DEVICE_MUST_BE_MASTER = |
| 2040, /**< BNEP: Device must be master of the piconet for this function */ |
| OI_BNEP_PACKET_FILTERED_OUT = |
| 2041, /**< BNEP: Packet did not pass current filters */ |
| |
| OI_NETIFC_UP_FAILED = |
| 2101, /**< NETIFC: Could not bring up network interface */ |
| OI_NETIFC_COULD_NOT_CREATE_THREAD = |
| 2102, /**< NETIFC: Network interface could not create a read thread */ |
| OI_NETIFC_INITIALIZATION_FAILED = |
| 2103, /**< NETIFC: Error in network interface initialization */ |
| OI_NETIFC_INTERFACE_ALREADY_UP = |
| 2104, /**< NETIFC: Network interface is already up */ |
| OI_NETIFC_INTERFACE_NOT_UP = 2105, /**< NETIFC: Network interface is not up */ |
| OI_NETIFC_PACKET_TOO_BIG = 2106, /**< NETIFC: The packet is too big */ |
| |
| OI_PAN_ROLE_ALREADY_REGISTERED = |
| 2201, /**< PAN: This PAN role was already registered */ |
| OI_PAN_ROLE_NOT_ALLOWED = |
| 2202, /**< PAN: The PAN role is not currently allowed */ |
| OI_PAN_INCOMPATIBLE_ROLES = |
| 2203, /**< PAN: Only certain local and remote role combinations are |
| permitted */ |
| OI_PAN_INVALID_ROLE = |
| 2204, /**< PAN: Role specified is not one the defined PAN roles */ |
| OI_PAN_CONNECTION_IN_PROGRESS = |
| 2205, /**< PAN: A PAN connection is currently being established */ |
| OI_PAN_USER_ALREADY_CONNECTED = |
| 2206, /**< PAN: PAN user role only allows a single connection */ |
| OI_PAN_DEVICE_CONNECTED = |
| 2207, /**< PAN: A PAN connection already exists to specified device */ |
| |
| OI_CODEC_SBC_NO_SYNCWORD = 2301, /**< CODEC: Couldn't find an SBC SYNCWORD */ |
| OI_CODEC_SBC_NOT_ENOUGH_HEADER_DATA = |
| 2302, /**< CODEC: Not enough data provided to decode an SBC header */ |
| OI_CODEC_SBC_NOT_ENOUGH_BODY_DATA = |
| 2303, /**< CODEC: Decoded the header, but not enough data to contain the |
| rest of the frame */ |
| OI_CODEC_SBC_NOT_ENOUGH_AUDIO_DATA = |
| 2304, /**< CODEC: Not enough audio data for this frame */ |
| OI_CODEC_SBC_CHECKSUM_MISMATCH = |
| 2305, /**< CODEC: The frame header didn't match the checksum */ |
| OI_CODEC_SBC_PARTIAL_DECODE = |
| 2306, /**< CODEC: Decoding was successful, but frame data still remains. |
| Next call will provide audio without consuming input data. */ |
| |
| OI_FIFOQ_QUEUE_NOT_ALIGNED = 2401, /**< FIFOQ: queue must be 32-bit aligned */ |
| OI_FIFOQ_INVALID_Q = 2402, /**< FIFOQ: queue parameter is not a valid queue */ |
| OI_FIFOQ_BUF_TOO_LARGE = |
| 2403, /**< FIFOQ: attempt to queue a buffer which is too large */ |
| OI_FIFOQ_FULL = 2404, /**< FIFOQ: enqueue() failed, queue is full */ |
| OI_FIFOQ_NOT_ALLOCATED = |
| 2405, /**< FIFOQ: Enqueue QBuf() failed, buffer not allocated */ |
| OI_FIFOQ_INVALID_DATA_PTR = |
| 2406, /**< FIFOQ: Enqueue QBuf() failed, data pointer does not match */ |
| |
| OI_HID_HOST_SERVICE_NOT_STARTED = 2601, /**< HID: Cannot connect to a HID |
| device unless HID host is started |
| */ |
| OI_HID_DEVICE_SERVICE_NOT_STARTED = |
| 2602, /**< HID: Cannot connect to a HID host unless HID device is started |
| */ |
| |
| OI_AT_ERROR = 2701, /**< AT: ERROR response */ |
| OI_AT_NO_CARRIER = 2702, /**< AT: NO CARRIER response */ |
| OI_AT_BUSY = 2703, /**< AT: BUSY response */ |
| OI_AT_NO_ANSWER = 2704, /**< AT: NO ANSWER response */ |
| OI_AT_DELAYED = 2705, /**< AT: DELAYED response */ |
| OI_AT_BLACKLISTED = 2706, /**< AT: BLACKLISTED response */ |
| OI_AT_CME_ERROR = 2707, /**< AT: +CME ERROR response */ |
| OI_AT_CMS_ERROR = 2708, /**< AT: +CMS ERROR response */ |
| |
| OI_BLST_CHARACTER_TIMEOUT = |
| 2801, /**< BLST: Timeout expired while waiting for a character from the |
| client. */ |
| OI_BLST_ACKNOWLDGE_TIMEOUT = |
| 2802, /**< BLST: Timeout expired while waiting for event acknowledgment |
| from the client */ |
| OI_BLST_TX_NOT_READY = 2803, /**< BLST: BLST is not ready to send a BHAPI |
| message to the client. */ |
| OI_BLST_TX_BUSY = 2804, /**< BLST: BLST transmit buffer is in use. */ |
| |
| OI_AVDTP_CONNECTION_SEQ_ERROR = |
| 2901, /**< AVDTP: sequencing of signalling/media channel connections |
| broken. */ |
| OI_AVDTP_OUT_OF_RESOURCES = 2902, /**< AVDTP: Tried to allocate too many |
| endpoints or signalling channels. */ |
| |
| OI_PBAP_REPOSITORY_NOT_SET = |
| 3001, /**< PBAP: Phonebook repository must be set for operation to |
| complete. */ |
| OI_PBAP_PHONEBOOK_NOT_SET = |
| 3002, /**< PBAP: Phonebook be set for operation to complete. */ |
| |
| OI_AADP_BAD_ENDPOINT = 3101, /**< AADP: Invalid local endpoint specified */ |
| OI_AADP_BAD_STATE = |
| 3102, /**< AADP: AADP State is not correct for this operation. */ |
| |
| OI_UNICODE_INVALID_SOURCE = 3200, /**< Unicode Conversion: Source string has |
| invalid character encoding. */ |
| OI_UNICODE_SOURCE_EXHAUSTED = 3201, /**< Unicode Conversion: Incomplete |
| Unicode character at end of source |
| buffer. */ |
| OI_UNICODE_DESTINATION_EXHAUSTED = 3202, /**< Unicode Conversion: Destination |
| buffer not large enough to hold |
| resulting Unicode string. */ |
| |
| OI_AVRCP_TOO_MANY_CONNECTIONS = 3300, /**< AVRCP: Exceeded maximum number of |
| simultaneous AVCTP connections. */ |
| OI_AVRCP_NOT_IMPLEMENTED = |
| 3301, /**< AVRCP: The target does not implement the command specified by |
| the opcode and operand. */ |
| OI_AVRCP_REJECTED = 3302, /**< AVRCP: The target cannot respond because of |
| invalid operands in command packet. */ |
| OI_AVRCP_INVALID_RESPONSE = 3303, /**< AVRCP: The controller received the |
| response with invalid parameters */ |
| OI_AVRCP_RESPONSE_PACKET_OVERFLOW = |
| 3304, /**< AVRCP: The response message does not fir in one AVRCP packet |
| (512 bytes), has to be fragmented. */ |
| OI_AVRCP_RESPONSE_INVALID_PDU = 3305, /**< AVRCP: Command rejected: target |
| received a PDU that it did not |
| understand. */ |
| OI_AVRCP_RESPONSE_INVALID_PARAMETER = 3306, /**< AVRCP: Command rejected: |
| target received a PDU with a |
| parameter ID that it did not |
| understand. */ |
| OI_AVRCP_RESPONSE_PARAMETER_NOT_FOUND = |
| 3307, /**< AVRCP: Command rejected: specified parameter not found, sent if |
| the parameter ID is understood, but content is wrong or |
| corrupted.*/ |
| OI_AVRCP_RESPONSE_INTERNAL_ERROR = |
| 3308, /**< AVRCP: Command rejected: target detected other error |
| conditions. */ |
| OI_MAX_BM3_STATUS_VAL, /* Maximum BM3 status code */ |
| |
| /* Status code values reserved for BM3 SDK platform-specific implementations |
| */ |
| OI_STATUS_RESERVED_FOR_BCOT = 9000, |
| |
| /* Status code values reserved for BHAPI products */ |
| OI_STATUS_RESERVED_FOR_BHAPI = 9200, |
| |
| /* Status code values reserved for Soundabout products */ |
| OI_STATUS_RESERVED_FOR_SOUNDABOUT = 9400, |
| |
| /* |
| * Status code values greater than or equal to this value are reserved for use |
| * by applications. |
| * However, because of differences between compilers, and differences between |
| * 16-bit and 32-bit |
| * platforms custom status codes should be in the 16-bit range, so status |
| * codes can range from 0 |
| * to 65534, inclusive (65535 is reserved) |
| */ |
| OI_STATUS_RESERVED_FOR_APPS = 10000, |
| |
| OI_STATUS_NONE = 0xffff /**< Special status code to indicate that there is no |
| status. (Only to be used for special cases |
| involving OI_SLOG_ERROR() and OI_SLOG_WARNING().) |
| */ |
| |
| } OI_STATUS; |
| |
| /* Remeber to update the #define below when new reserved blocks are added to |
| * the list above. */ |
| #define OI_NUM_RESERVED_STATUS_BLOCKS \ |
| 4 /**< Number of status code blocks reserved, including user apps */ |
| |
| /** |
| * Test for success |
| */ |
| #define OI_SUCCESS(x) ((x) == OI_OK) |
| |
| /*****************************************************************************/ |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| /**@}*/ |
| |
| #endif /* _OI_STATUS_H */ |
