| /****************************************************************************** |
| * |
| * Copyright 2000-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This file contains functions that handle SCO connections. This includes |
| * operations such as connect, disconnect, change supported packet types. |
| * |
| ******************************************************************************/ |
| |
| #include <base/strings/stringprintf.h> |
| #include <cstdint> |
| #include <string> |
| |
| #include "device/include/controller.h" |
| #include "device/include/esco_parameters.h" |
| #include "osi/include/log.h" |
| #include "osi/include/osi.h" |
| #include "stack/btm/btm_sec.h" |
| #include "stack/btm/security_device_record.h" |
| #include "stack/include/acl_api.h" |
| #include "stack/include/btm_api.h" |
| #include "stack/include/btm_api_types.h" |
| #include "stack/include/hci_error_code.h" |
| #include "stack/include/hcimsgs.h" |
| #include "types/class_of_device.h" |
| #include "types/raw_address.h" |
| |
| extern tBTM_CB btm_cb; |
| |
| namespace { |
| constexpr char kBtmLogTag[] = "SCO"; |
| |
| const bluetooth::legacy::hci::Interface& GetLegacyHciInterface() { |
| return bluetooth::legacy::hci::GetInterface(); |
| } |
| |
| }; // namespace |
| |
| /******************************************************************************/ |
| /* L O C A L D A T A D E F I N I T I O N S */ |
| /******************************************************************************/ |
| |
| #define BTM_SCO_PKT_TYPE_MASK \ |
| (HCI_PKT_TYPES_MASK_HV1 | HCI_PKT_TYPES_MASK_HV2 | HCI_PKT_TYPES_MASK_HV3) |
| |
| /* MACROs to convert from SCO packet types mask to ESCO and back */ |
| #define BTM_SCO_PKT_TYPE_MASK \ |
| (HCI_PKT_TYPES_MASK_HV1 | HCI_PKT_TYPES_MASK_HV2 | HCI_PKT_TYPES_MASK_HV3) |
| |
| /* Mask defining only the SCO types of an esco packet type */ |
| #define BTM_ESCO_PKT_TYPE_MASK \ |
| (ESCO_PKT_TYPES_MASK_HV1 | ESCO_PKT_TYPES_MASK_HV2 | ESCO_PKT_TYPES_MASK_HV3) |
| |
| #define BTM_ESCO_2_SCO(escotype) \ |
| ((uint16_t)(((escotype)&BTM_ESCO_PKT_TYPE_MASK) << 5)) |
| |
| /* Define masks for supported and exception 2.0 SCO packet types |
| */ |
| #define BTM_SCO_SUPPORTED_PKTS_MASK \ |
| (ESCO_PKT_TYPES_MASK_HV1 | ESCO_PKT_TYPES_MASK_HV2 | \ |
| ESCO_PKT_TYPES_MASK_HV3 | ESCO_PKT_TYPES_MASK_EV3 | \ |
| ESCO_PKT_TYPES_MASK_EV4 | ESCO_PKT_TYPES_MASK_EV5) |
| |
| #define BTM_SCO_EXCEPTION_PKTS_MASK \ |
| (ESCO_PKT_TYPES_MASK_NO_2_EV3 | ESCO_PKT_TYPES_MASK_NO_3_EV3 | \ |
| ESCO_PKT_TYPES_MASK_NO_2_EV5 | ESCO_PKT_TYPES_MASK_NO_3_EV5) |
| |
| /******************************************************************************/ |
| /* L O C A L F U N C T I O N P R O T O T Y P E S */ |
| /******************************************************************************/ |
| |
| static uint16_t btm_sco_voice_settings_to_legacy(enh_esco_params_t* p_parms); |
| |
| /******************************************************************************* |
| * |
| * Function btm_sco_flush_sco_data |
| * |
| * Description This function is called to flush the SCO data for this |
| * channel. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void btm_sco_flush_sco_data(UNUSED_ATTR uint16_t sco_inx) {} |
| |
| /******************************************************************************* |
| * |
| * Function btm_esco_conn_rsp |
| * |
| * Description This function is called upon receipt of an (e)SCO connection |
| * request event (BTM_ESCO_CONN_REQ_EVT) to accept or reject |
| * the request. Parameters used to negotiate eSCO links. |
| * If p_parms is NULL, then default values are used. |
| * If the link type of the incoming request is SCO, then only |
| * the tx_bw, max_latency, content format, and packet_types are |
| * valid. The hci_status parameter should be |
| * ([0x0] to accept, [0x0d..0x0f] to reject) |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static void btm_esco_conn_rsp(uint16_t sco_inx, uint8_t hci_status, |
| const RawAddress& bda, |
| enh_esco_params_t* p_parms) { |
| tSCO_CONN* p_sco = NULL; |
| |
| if (BTM_MAX_SCO_LINKS == 0) return; |
| |
| if (sco_inx < BTM_MAX_SCO_LINKS) p_sco = &btm_cb.sco_cb.sco_db[sco_inx]; |
| |
| /* Reject the connect request if refused by caller or wrong state */ |
| if (hci_status != HCI_SUCCESS || p_sco == NULL) { |
| if (p_sco) { |
| p_sco->state = (p_sco->state == SCO_ST_W4_CONN_RSP) ? SCO_ST_LISTENING |
| : SCO_ST_UNUSED; |
| } |
| if (!btm_cb.sco_cb.esco_supported) { |
| btsnd_hcic_reject_conn(bda, hci_status); |
| } else { |
| btsnd_hcic_reject_esco_conn(bda, hci_status); |
| } |
| } else { |
| /* Connection is being accepted */ |
| p_sco->state = SCO_ST_CONNECTING; |
| enh_esco_params_t* p_setup = &p_sco->esco.setup; |
| /* If parameters not specified use the default */ |
| if (p_parms) { |
| *p_setup = *p_parms; |
| } else { |
| /* Use the last setup passed thru BTM_SetEscoMode (or defaults) */ |
| *p_setup = btm_cb.sco_cb.def_esco_parms; |
| } |
| |
| /* Use Enhanced Synchronous commands if supported */ |
| if (controller_get_interface() |
| ->supports_enhanced_setup_synchronous_connection()) { |
| /* Use the saved SCO routing */ |
| p_setup->input_data_path = p_setup->output_data_path = |
| btm_cb.sco_cb.sco_route; |
| |
| BTM_TRACE_DEBUG( |
| "%s: txbw 0x%x, rxbw 0x%x, lat 0x%x, retrans 0x%02x, " |
| "pkt 0x%04x, path %u", |
| __func__, p_setup->transmit_bandwidth, p_setup->receive_bandwidth, |
| p_setup->max_latency_ms, p_setup->retransmission_effort, |
| p_setup->packet_types, p_setup->input_data_path); |
| |
| btsnd_hcic_enhanced_accept_synchronous_connection(bda, p_setup); |
| |
| } else { |
| /* Use legacy command if enhanced SCO setup is not supported */ |
| uint16_t voice_content_format = btm_sco_voice_settings_to_legacy(p_setup); |
| btsnd_hcic_accept_esco_conn( |
| bda, p_setup->transmit_bandwidth, p_setup->receive_bandwidth, |
| p_setup->max_latency_ms, voice_content_format, |
| p_setup->retransmission_effort, p_setup->packet_types); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_route_sco_data |
| * |
| * Description Route received SCO data. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_route_sco_data(BT_HDR* p_msg) { |
| osi_free(p_msg); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_send_connect_request |
| * |
| * Description This function is called to respond to SCO connect |
| * indications |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| static tBTM_STATUS btm_send_connect_request(uint16_t acl_handle, |
| enh_esco_params_t* p_setup) { |
| /* Send connect request depending on version of spec */ |
| if (!btm_cb.sco_cb.esco_supported) { |
| LOG(INFO) << __func__ << ": sending non-eSCO request for handle=" |
| << unsigned(acl_handle); |
| btsnd_hcic_add_SCO_conn(acl_handle, BTM_ESCO_2_SCO(p_setup->packet_types)); |
| } else { |
| uint16_t temp_packet_types = |
| (p_setup->packet_types & |
| static_cast<uint16_t>(BTM_SCO_SUPPORTED_PKTS_MASK) & |
| btm_cb.btm_sco_pkt_types_supported); |
| |
| /* OR in any exception packet types */ |
| temp_packet_types |= |
| ((p_setup->packet_types & BTM_SCO_EXCEPTION_PKTS_MASK) | |
| (btm_cb.btm_sco_pkt_types_supported & BTM_SCO_EXCEPTION_PKTS_MASK)); |
| |
| /* Finally, remove EDR eSCO if the remote device doesn't support it */ |
| /* UPF25: Only SCO was brought up in this case */ |
| const RawAddress bd_addr = acl_address_from_handle(acl_handle); |
| if (bd_addr != RawAddress::kEmpty) { |
| if (!sco_peer_supports_esco_2m_phy(bd_addr)) { |
| BTM_TRACE_DEBUG("BTM Remote does not support 2-EDR eSCO"); |
| temp_packet_types |= |
| (ESCO_PKT_TYPES_MASK_NO_2_EV3 | ESCO_PKT_TYPES_MASK_NO_2_EV5); |
| } |
| if (!sco_peer_supports_esco_3m_phy(bd_addr)) { |
| BTM_TRACE_DEBUG("BTM Remote does not support 3-EDR eSCO"); |
| temp_packet_types |= |
| (ESCO_PKT_TYPES_MASK_NO_3_EV3 | ESCO_PKT_TYPES_MASK_NO_3_EV5); |
| } |
| |
| /* Check to see if BR/EDR Secure Connections is being used |
| ** If so, we cannot use SCO-only packet types (HFP 1.7) |
| */ |
| const bool local_supports_sc = |
| controller_get_interface()->supports_secure_connections(); |
| const bool remote_supports_sc = |
| BTM_PeerSupportsSecureConnections(bd_addr); |
| |
| if (local_supports_sc && remote_supports_sc) { |
| temp_packet_types &= ~(BTM_SCO_PKT_TYPE_MASK); |
| if (temp_packet_types == 0) { |
| LOG_ERROR( |
| "SCO connection cannot support any packet types for " |
| "acl_handle:0x%04x", |
| acl_handle); |
| return BTM_WRONG_MODE; |
| } |
| LOG_DEBUG( |
| "Both local and remote controllers support SCO secure connections " |
| "handle:0x%04x pkt_types:0x%04x", |
| acl_handle, temp_packet_types); |
| |
| } else if (!local_supports_sc && !remote_supports_sc) { |
| LOG_DEBUG( |
| "Both local and remote controllers do not support secure " |
| "connections for handle:0x%04x", |
| acl_handle); |
| } else if (remote_supports_sc) { |
| LOG_DEBUG( |
| "Only remote controller supports secure connections for " |
| "handle:0x%04x", |
| acl_handle); |
| } else { |
| LOG_DEBUG( |
| "Only local controller supports secure connections for " |
| "handle:0x%04x", |
| acl_handle); |
| } |
| } else { |
| LOG_ERROR("Received SCO connect from unknown peer:%s", |
| PRIVATE_ADDRESS(bd_addr)); |
| } |
| |
| /* Save the previous types in case command fails */ |
| uint16_t saved_packet_types = p_setup->packet_types; |
| p_setup->packet_types = temp_packet_types; |
| |
| /* Use Enhanced Synchronous commands if supported */ |
| if (controller_get_interface() |
| ->supports_enhanced_setup_synchronous_connection()) { |
| LOG_INFO("Sending enhanced SCO connect request over handle:0x%04x", |
| acl_handle); |
| /* Use the saved SCO routing */ |
| p_setup->input_data_path = p_setup->output_data_path = |
| btm_cb.sco_cb.sco_route; |
| LOG(INFO) << __func__ << std::hex << ": enhanced parameter list" |
| << " txbw=0x" << unsigned(p_setup->transmit_bandwidth) |
| << ", rxbw=0x" << unsigned(p_setup->receive_bandwidth) |
| << ", latency_ms=0x" << unsigned(p_setup->max_latency_ms) |
| << ", retransmit_effort=0x" |
| << unsigned(p_setup->retransmission_effort) << ", pkt_type=0x" |
| << unsigned(p_setup->packet_types) << ", path=0x" |
| << unsigned(p_setup->input_data_path); |
| btsnd_hcic_enhanced_set_up_synchronous_connection(acl_handle, p_setup); |
| p_setup->packet_types = saved_packet_types; |
| } else { /* Use older command */ |
| LOG_INFO("Sending eSCO connect request over handle:0x%04x", acl_handle); |
| uint16_t voice_content_format = btm_sco_voice_settings_to_legacy(p_setup); |
| LOG(INFO) << __func__ << std::hex << ": legacy parameter list" |
| << " txbw=0x" << unsigned(p_setup->transmit_bandwidth) |
| << ", rxbw=0x" << unsigned(p_setup->receive_bandwidth) |
| << ", latency_ms=0x" << unsigned(p_setup->max_latency_ms) |
| << ", retransmit_effort=0x" |
| << unsigned(p_setup->retransmission_effort) |
| << ", voice_content_format=0x" << unsigned(voice_content_format) |
| << ", pkt_type=0x" << unsigned(p_setup->packet_types); |
| btsnd_hcic_setup_esco_conn( |
| acl_handle, p_setup->transmit_bandwidth, p_setup->receive_bandwidth, |
| p_setup->max_latency_ms, voice_content_format, |
| p_setup->retransmission_effort, p_setup->packet_types); |
| } |
| } |
| |
| return (BTM_CMD_STARTED); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_CreateSco |
| * |
| * Description This function is called to create an SCO connection. If the |
| * "is_orig" flag is true, the connection will be originated, |
| * otherwise BTM will wait for the other side to connect. |
| * |
| * NOTE: If BTM_IGNORE_SCO_PKT_TYPE is passed in the pkt_types |
| * parameter the default packet types is used. |
| * |
| * Returns BTM_UNKNOWN_ADDR if the ACL connection is not up |
| * BTM_BUSY if another SCO being set up to |
| * the same BD address |
| * BTM_NO_RESOURCES if the max SCO limit has been reached |
| * BTM_CMD_STARTED if the connection establishment is started. |
| * In this case, "*p_sco_inx" is filled in |
| * with the sco index used for the connection. |
| * |
| ******************************************************************************/ |
| tBTM_STATUS BTM_CreateSco(const RawAddress* remote_bda, bool is_orig, |
| uint16_t pkt_types, uint16_t* p_sco_inx, |
| tBTM_SCO_CB* p_conn_cb, tBTM_SCO_CB* p_disc_cb) { |
| enh_esco_params_t* p_setup; |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| uint16_t xx; |
| uint16_t acl_handle = HCI_INVALID_HANDLE; |
| *p_sco_inx = BTM_INVALID_SCO_INDEX; |
| |
| if (BTM_MAX_SCO_LINKS == 0) { |
| return BTM_NO_RESOURCES; |
| } |
| |
| /* If originating, ensure that there is an ACL connection to the BD Address */ |
| |
| if (is_orig) { |
| if (!remote_bda) { |
| LOG(ERROR) << __func__ << ": remote_bda is null"; |
| return BTM_ILLEGAL_VALUE; |
| } |
| acl_handle = BTM_GetHCIConnHandle(*remote_bda, BT_TRANSPORT_BR_EDR); |
| if (acl_handle == HCI_INVALID_HANDLE) { |
| LOG(ERROR) << __func__ << ": cannot find ACL handle for remote device " |
| << remote_bda; |
| return BTM_UNKNOWN_ADDR; |
| } |
| } |
| |
| if (remote_bda) { |
| /* If any SCO is being established to the remote BD address, refuse this */ |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if (((p->state == SCO_ST_CONNECTING) || (p->state == SCO_ST_LISTENING) || |
| (p->state == SCO_ST_PEND_UNPARK)) && |
| (p->esco.data.bd_addr == *remote_bda)) { |
| LOG(ERROR) << __func__ << ": a sco connection is already going on for " |
| << *remote_bda << ", at state " << unsigned(p->state); |
| return BTM_BUSY; |
| } |
| } |
| } else { |
| /* Support only 1 wildcard BD address at a time */ |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if ((p->state == SCO_ST_LISTENING) && (!p->rem_bd_known)) { |
| LOG(ERROR) |
| << __func__ |
| << ": remote_bda is null and not known and we are still listening"; |
| return BTM_BUSY; |
| } |
| } |
| } |
| |
| /* Try to find an unused control block, and kick off the SCO establishment */ |
| for (xx = 0, p = &btm_cb.sco_cb.sco_db[0]; xx < BTM_MAX_SCO_LINKS; |
| xx++, p++) { |
| if (p->state == SCO_ST_UNUSED) { |
| if (remote_bda) { |
| if (is_orig) { |
| // can not create SCO link if in park mode |
| tBTM_PM_STATE state; |
| if (BTM_ReadPowerMode(*remote_bda, &state)) { |
| if (state == BTM_PM_ST_SNIFF || state == BTM_PM_ST_PARK || |
| state == BTM_PM_ST_PENDING) { |
| LOG(INFO) << __func__ << ": " << *remote_bda |
| << " in sniff, park or pending mode " |
| << unsigned(state); |
| if (!BTM_SetLinkPolicyActiveMode(*remote_bda)) { |
| LOG_WARN("Unable to set link policy active"); |
| } |
| p->state = SCO_ST_PEND_UNPARK; |
| } |
| } else { |
| LOG(ERROR) << __func__ << ": failed to read power mode for " |
| << *remote_bda; |
| } |
| } |
| p->esco.data.bd_addr = *remote_bda; |
| p->rem_bd_known = true; |
| } else |
| p->rem_bd_known = false; |
| |
| p_setup = &p->esco.setup; |
| *p_setup = btm_cb.sco_cb.def_esco_parms; |
| |
| /* Determine the packet types */ |
| p_setup->packet_types = pkt_types & BTM_SCO_SUPPORTED_PKTS_MASK & |
| btm_cb.btm_sco_pkt_types_supported; |
| /* OR in any exception packet types */ |
| if (controller_get_interface()->get_bt_version()->hci_version >= |
| HCI_PROTO_VERSION_2_0) { |
| p_setup->packet_types |= |
| (pkt_types & BTM_SCO_EXCEPTION_PKTS_MASK) | |
| (btm_cb.btm_sco_pkt_types_supported & BTM_SCO_EXCEPTION_PKTS_MASK); |
| } |
| |
| p->p_conn_cb = p_conn_cb; |
| p->p_disc_cb = p_disc_cb; |
| p->hci_handle = HCI_INVALID_HANDLE; |
| p->is_orig = is_orig; |
| |
| if (p->state != SCO_ST_PEND_UNPARK) { |
| if (is_orig) { |
| /* If role change is in progress, do not proceed with SCO setup |
| * Wait till role change is complete */ |
| if (!acl_is_switch_role_idle(*remote_bda, BT_TRANSPORT_BR_EDR)) { |
| BTM_TRACE_API("Role Change is in progress for ACL handle 0x%04x", |
| acl_handle); |
| p->state = SCO_ST_PEND_ROLECHANGE; |
| } |
| } |
| } |
| |
| if (p->state != SCO_ST_PEND_UNPARK && |
| p->state != SCO_ST_PEND_ROLECHANGE) { |
| if (is_orig) { |
| LOG_DEBUG("Initiating (e)SCO link for ACL handle:0x%04x", acl_handle); |
| |
| if ((btm_send_connect_request(acl_handle, p_setup)) != |
| BTM_CMD_STARTED) { |
| LOG(ERROR) << __func__ << ": failed to send connect request for " |
| << *remote_bda; |
| return (BTM_NO_RESOURCES); |
| } |
| |
| p->state = SCO_ST_CONNECTING; |
| } else { |
| LOG_DEBUG("Listening for (e)SCO on ACL handle:0x%04x", acl_handle); |
| p->state = SCO_ST_LISTENING; |
| } |
| } |
| |
| *p_sco_inx = xx; |
| LOG_DEBUG("SCO connection successfully requested"); |
| if (p->state == SCO_ST_CONNECTING) { |
| BTM_LogHistory( |
| kBtmLogTag, *remote_bda, "Connecting", |
| base::StringPrintf("local initiated acl:0x%04x", acl_handle)); |
| } |
| return BTM_CMD_STARTED; |
| } |
| } |
| |
| /* If here, all SCO blocks in use */ |
| LOG(ERROR) << __func__ << ": all SCO control blocks are in use"; |
| return BTM_NO_RESOURCES; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_sco_chk_pend_unpark |
| * |
| * Description This function is called by BTIF when there is a mode change |
| * event to see if there are SCO commands waiting for the |
| * unpark. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_sco_chk_pend_unpark(tHCI_STATUS hci_status, uint16_t hci_handle) { |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| for (uint16_t xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| uint16_t acl_handle = |
| BTM_GetHCIConnHandle(p->esco.data.bd_addr, BT_TRANSPORT_BR_EDR); |
| if ((p->state == SCO_ST_PEND_UNPARK) && (acl_handle == hci_handle)) { |
| LOG(INFO) << __func__ << ": " << p->esco.data.bd_addr |
| << " unparked, sending connection request, acl_handle=" |
| << unsigned(acl_handle) |
| << ", hci_status=" << unsigned(hci_status); |
| if (btm_send_connect_request(acl_handle, &p->esco.setup) == |
| BTM_CMD_STARTED) { |
| p->state = SCO_ST_CONNECTING; |
| } else { |
| LOG(ERROR) << __func__ << ": failed to send connection request for " |
| << p->esco.data.bd_addr; |
| } |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_sco_chk_pend_rolechange |
| * |
| * Description This function is called by BTIF when there is a role change |
| * event to see if there are SCO commands waiting for the role |
| * change. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_sco_chk_pend_rolechange(uint16_t hci_handle) { |
| uint16_t xx; |
| uint16_t acl_handle; |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if ((p->state == SCO_ST_PEND_ROLECHANGE) && |
| ((acl_handle = BTM_GetHCIConnHandle( |
| p->esco.data.bd_addr, BT_TRANSPORT_BR_EDR)) == hci_handle)) |
| |
| { |
| BTM_TRACE_API( |
| "btm_sco_chk_pend_rolechange -> (e)SCO Link for ACL handle 0x%04x", |
| acl_handle); |
| |
| if ((btm_send_connect_request(acl_handle, &p->esco.setup)) == |
| BTM_CMD_STARTED) |
| p->state = SCO_ST_CONNECTING; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_sco_disc_chk_pend_for_modechange |
| * |
| * Description This function is called by btm when there is a mode change |
| * event to see if there are SCO disconnect commands waiting |
| * for the mode change. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_sco_disc_chk_pend_for_modechange(uint16_t hci_handle) { |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| |
| LOG_DEBUG( |
| "Checking for SCO pending mode change events hci_handle:0x%04x " |
| "p->state:%s", |
| hci_handle, sco_state_text(p->state).c_str()); |
| |
| for (uint16_t xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if ((p->state == SCO_ST_PEND_MODECHANGE) && |
| (BTM_GetHCIConnHandle(p->esco.data.bd_addr, BT_TRANSPORT_BR_EDR)) == |
| hci_handle) |
| |
| { |
| LOG_DEBUG("Removing SCO Link handle 0x%04x", p->hci_handle); |
| BTM_RemoveSco(xx); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_sco_conn_req |
| * |
| * Description This function is called by BTU HCIF when an SCO connection |
| * request is received from a remote. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_sco_conn_req(const RawAddress& bda, const DEV_CLASS& dev_class, |
| uint8_t link_type) { |
| tSCO_CB* p_sco = &btm_cb.sco_cb; |
| tSCO_CONN* p = &p_sco->sco_db[0]; |
| tBTM_ESCO_CONN_REQ_EVT_DATA evt_data = {}; |
| |
| for (uint16_t sco_index = 0; sco_index < BTM_MAX_SCO_LINKS; |
| sco_index++, p++) { |
| /* |
| * If the sco state is in the SCO_ST_CONNECTING state, we still need |
| * to return accept sco to avoid race conditon for sco creation |
| */ |
| bool rem_bd_matches = p->rem_bd_known && p->esco.data.bd_addr == bda; |
| if (((p->state == SCO_ST_CONNECTING) && rem_bd_matches) || |
| ((p->state == SCO_ST_LISTENING) && |
| (rem_bd_matches || !p->rem_bd_known))) { |
| /* If this was a wildcard, it is not one any more */ |
| p->rem_bd_known = true; |
| p->esco.data.link_type = link_type; |
| p->state = SCO_ST_W4_CONN_RSP; |
| p->esco.data.bd_addr = bda; |
| |
| /* If no callback, auto-accept the connection if packet types match */ |
| if (!p->esco.p_esco_cback) { |
| /* If requesting eSCO reject if default parameters are SCO only */ |
| if ((link_type == BTM_LINK_TYPE_ESCO && |
| !(p_sco->def_esco_parms.packet_types & BTM_ESCO_LINK_ONLY_MASK) && |
| ((p_sco->def_esco_parms.packet_types & |
| BTM_SCO_EXCEPTION_PKTS_MASK) == BTM_SCO_EXCEPTION_PKTS_MASK)) |
| |
| /* Reject request if SCO is desired but no SCO packets delected */ |
| || |
| (link_type == BTM_LINK_TYPE_SCO && |
| !(p_sco->def_esco_parms.packet_types & BTM_SCO_LINK_ONLY_MASK))) { |
| btm_esco_conn_rsp(sco_index, HCI_ERR_HOST_REJECT_RESOURCES, bda, |
| nullptr); |
| } else { |
| /* Accept the request */ |
| btm_esco_conn_rsp(sco_index, HCI_SUCCESS, bda, nullptr); |
| } |
| } else { |
| /* Notify upper layer of connect indication */ |
| evt_data.bd_addr = bda; |
| memcpy(evt_data.dev_class, dev_class, DEV_CLASS_LEN); |
| evt_data.link_type = link_type; |
| evt_data.sco_inx = sco_index; |
| tBTM_ESCO_EVT_DATA btm_esco_evt_data = {}; |
| btm_esco_evt_data.conn_evt = evt_data; |
| p->esco.p_esco_cback(BTM_ESCO_CONN_REQ_EVT, &btm_esco_evt_data); |
| } |
| |
| return; |
| } |
| } |
| |
| /* TCS usage */ |
| if (btm_cb.sco_cb.app_sco_ind_cb) { |
| /* Now, try to find an unused control block */ |
| uint16_t sco_index; |
| for (sco_index = 0, p = &btm_cb.sco_cb.sco_db[0]; |
| sco_index < BTM_MAX_SCO_LINKS; sco_index++, p++) { |
| if (p->state == SCO_ST_UNUSED) { |
| p->is_orig = false; |
| p->state = SCO_ST_LISTENING; |
| |
| p->esco.data.link_type = link_type; |
| p->esco.data.bd_addr = bda; |
| p->rem_bd_known = true; |
| break; |
| } |
| } |
| if (sco_index < BTM_MAX_SCO_LINKS) { |
| btm_cb.sco_cb.app_sco_ind_cb(sco_index); |
| return; |
| } |
| } |
| |
| /* If here, no one wants the SCO connection. Reject it */ |
| BTM_TRACE_WARNING("%s: rejecting SCO for %s", __func__, |
| bda.ToString().c_str()); |
| btm_esco_conn_rsp(BTM_MAX_SCO_LINKS, HCI_ERR_HOST_REJECT_RESOURCES, bda, |
| nullptr); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_sco_connected |
| * |
| * Description This function is called by BTIF when an (e)SCO connection |
| * is connected. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_sco_connected(tHCI_STATUS hci_status, const RawAddress& bda, |
| uint16_t hci_handle, tBTM_ESCO_DATA* p_esco_data) { |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| uint16_t xx; |
| bool spt = false; |
| tBTM_CHG_ESCO_PARAMS parms = {}; |
| |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if (((p->state == SCO_ST_CONNECTING) || (p->state == SCO_ST_LISTENING) || |
| (p->state == SCO_ST_W4_CONN_RSP)) && |
| (p->rem_bd_known) && (p->esco.data.bd_addr == bda)) { |
| if (hci_status != HCI_SUCCESS) { |
| /* Report the error if originator, otherwise remain in Listen mode */ |
| if (p->is_orig) { |
| LOG_DEBUG("SCO initiating connection failed handle:0x%04x reason:%s", |
| hci_handle, hci_error_code_text(hci_status).c_str()); |
| switch (hci_status) { |
| case HCI_ERR_ROLE_SWITCH_PENDING: |
| /* If role switch is pending, we need try again after role switch |
| * is complete */ |
| p->state = SCO_ST_PEND_ROLECHANGE; |
| break; |
| case HCI_ERR_LMP_ERR_TRANS_COLLISION: |
| /* Avoid calling disconnect callback because of sco creation race |
| */ |
| break; |
| default: /* Notify client about SCO failure */ |
| p->state = SCO_ST_UNUSED; |
| (*p->p_disc_cb)(xx); |
| } |
| BTM_LogHistory( |
| kBtmLogTag, bda, "Connection failed", |
| base::StringPrintf( |
| "locally_initiated reason:%s", |
| hci_reason_code_text(static_cast<tHCI_REASON>(hci_status)) |
| .c_str())); |
| } else { |
| LOG_DEBUG("SCO terminating connection failed handle:0x%04x reason:%s", |
| hci_handle, hci_error_code_text(hci_status).c_str()); |
| if (p->state == SCO_ST_CONNECTING) { |
| p->state = SCO_ST_UNUSED; |
| (*p->p_disc_cb)(xx); |
| } else |
| p->state = SCO_ST_LISTENING; |
| BTM_LogHistory( |
| kBtmLogTag, bda, "Connection failed", |
| base::StringPrintf( |
| "remote_initiated reason:%s", |
| hci_reason_code_text(static_cast<tHCI_REASON>(hci_status)) |
| .c_str())); |
| } |
| return; |
| } |
| |
| BTM_LogHistory( |
| kBtmLogTag, bda, "Connection created", |
| base::StringPrintf("sco_idx:%hu handle:0x%04x ", xx, hci_handle)); |
| |
| if (p->state == SCO_ST_LISTENING) spt = true; |
| |
| p->state = SCO_ST_CONNECTED; |
| p->hci_handle = hci_handle; |
| |
| if (hci_status == HCI_SUCCESS) { |
| BTM_LogHistory(kBtmLogTag, bda, "Connection success", |
| base::StringPrintf("handle:0x%04x %s", hci_handle, |
| (spt) ? "listener" : "initiator")); |
| } else { |
| BTM_LogHistory( |
| kBtmLogTag, bda, "Connection failed", |
| base::StringPrintf( |
| "reason:%s", |
| hci_reason_code_text(static_cast<tHCI_REASON>(hci_status)) |
| .c_str())); |
| } |
| |
| if (!btm_cb.sco_cb.esco_supported) { |
| p->esco.data.link_type = BTM_LINK_TYPE_SCO; |
| if (spt) { |
| parms.packet_types = p->esco.setup.packet_types; |
| /* Keep the other parameters the same for SCO */ |
| parms.max_latency_ms = p->esco.setup.max_latency_ms; |
| parms.retransmission_effort = p->esco.setup.retransmission_effort; |
| |
| BTM_ChangeEScoLinkParms(xx, &parms); |
| } |
| } else { |
| if (p_esco_data) p->esco.data = *p_esco_data; |
| } |
| |
| (*p->p_conn_cb)(xx); |
| |
| return; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_RemoveSco |
| * |
| * Description This function is called to remove a specific SCO connection. |
| * |
| * Returns status of the operation |
| * |
| ******************************************************************************/ |
| tBTM_STATUS BTM_RemoveSco(uint16_t sco_inx) { |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[sco_inx]; |
| tBTM_PM_STATE state = BTM_PM_ST_INVALID; |
| |
| BTM_TRACE_DEBUG("%s", __func__); |
| |
| if (BTM_MAX_SCO_LINKS == 0) { |
| return BTM_NO_RESOURCES; |
| } |
| |
| /* Validity check */ |
| if ((sco_inx >= BTM_MAX_SCO_LINKS) || (p->state == SCO_ST_UNUSED)) |
| return (BTM_UNKNOWN_ADDR); |
| |
| /* If no HCI handle, simply drop the connection and return */ |
| if (p->hci_handle == HCI_INVALID_HANDLE || p->state == SCO_ST_PEND_UNPARK) { |
| p->hci_handle = HCI_INVALID_HANDLE; |
| p->state = SCO_ST_UNUSED; |
| p->esco.p_esco_cback = NULL; /* Deregister the eSCO event callback */ |
| return (BTM_SUCCESS); |
| } |
| |
| if (BTM_ReadPowerMode(p->esco.data.bd_addr, &state) && |
| (state == BTM_PM_ST_PENDING)) { |
| BTM_TRACE_DEBUG("%s: BTM_PM_ST_PENDING for ACL mapped with SCO Link 0x%04x", |
| __func__, p->hci_handle); |
| p->state = SCO_ST_PEND_MODECHANGE; |
| return (BTM_CMD_STARTED); |
| } |
| |
| tSCO_STATE old_state = p->state; |
| p->state = SCO_ST_DISCONNECTING; |
| |
| GetLegacyHciInterface().Disconnect(p->Handle(), HCI_ERR_PEER_USER); |
| |
| LOG_DEBUG("Disconnecting link sco_handle:0x%04x peer:%s", p->Handle(), |
| PRIVATE_ADDRESS(p->esco.data.bd_addr)); |
| BTM_LogHistory( |
| kBtmLogTag, p->esco.data.bd_addr, "Disconnecting", |
| base::StringPrintf("local initiated handle:0x%04x previous_state:%s", |
| p->Handle(), sco_state_text(old_state).c_str())); |
| return (BTM_CMD_STARTED); |
| } |
| |
| void BTM_RemoveSco(const RawAddress& bda) { |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| uint16_t xx; |
| |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if (p->rem_bd_known && p->esco.data.bd_addr == bda) { |
| BTM_RemoveSco(xx); |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_sco_removed |
| * |
| * Description This function is called by lower layers when an |
| * disconnect is received. |
| * |
| * Returns true if the link is known about, else false |
| * |
| ******************************************************************************/ |
| bool btm_sco_removed(uint16_t hci_handle, tHCI_REASON reason) { |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| uint16_t xx; |
| |
| p = &btm_cb.sco_cb.sco_db[0]; |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if ((p->state != SCO_ST_UNUSED) && (p->state != SCO_ST_LISTENING) && |
| (p->hci_handle == hci_handle)) { |
| btm_sco_flush_sco_data(xx); |
| |
| p->state = SCO_ST_UNUSED; |
| p->hci_handle = HCI_INVALID_HANDLE; |
| p->rem_bd_known = false; |
| p->esco.p_esco_cback = NULL; /* Deregister eSCO callback */ |
| (*p->p_disc_cb)(xx); |
| LOG_DEBUG("Disconnected SCO link handle:%hu reason:%s", hci_handle, |
| hci_reason_code_text(reason).c_str()); |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| void btm_sco_on_esco_connect_request( |
| const RawAddress& bda, const bluetooth::types::ClassOfDevice& cod) { |
| LOG_DEBUG("Remote ESCO connect request remote:%s cod:%s", |
| PRIVATE_ADDRESS(bda), cod.ToString().c_str()); |
| btm_sco_conn_req(bda, cod.cod, BTM_LINK_TYPE_ESCO); |
| } |
| |
| void btm_sco_on_sco_connect_request( |
| const RawAddress& bda, const bluetooth::types::ClassOfDevice& cod) { |
| LOG_DEBUG("Remote SCO connect request remote:%s cod:%s", PRIVATE_ADDRESS(bda), |
| cod.ToString().c_str()); |
| btm_sco_conn_req(bda, cod.cod, BTM_LINK_TYPE_SCO); |
| } |
| |
| void btm_sco_on_disconnected(uint16_t hci_handle, tHCI_REASON reason) { |
| tSCO_CONN* p_sco = btm_cb.sco_cb.get_sco_connection_from_handle(hci_handle); |
| if (p_sco == nullptr) { |
| LOG_ERROR("Unable to find sco connection"); |
| return; |
| } |
| |
| if (!p_sco->is_active()) { |
| LOG_ERROR("Connection is not active handle:0x%04x reason:%s", hci_handle, |
| hci_reason_code_text(reason).c_str()); |
| return; |
| } |
| |
| if (p_sco->state == SCO_ST_LISTENING) { |
| LOG_ERROR("Connection is in listening state handle:0x%04x reason:%s", |
| hci_handle, hci_reason_code_text(reason).c_str()); |
| return; |
| } |
| |
| const RawAddress bd_addr(p_sco->esco.data.bd_addr); |
| |
| p_sco->state = SCO_ST_UNUSED; |
| p_sco->hci_handle = HCI_INVALID_HANDLE; |
| p_sco->rem_bd_known = false; |
| p_sco->esco.p_esco_cback = NULL; /* Deregister eSCO callback */ |
| (*p_sco->p_disc_cb)(btm_cb.sco_cb.get_index(p_sco)); |
| LOG_DEBUG("Disconnected SCO link handle:%hu reason:%s", hci_handle, |
| hci_reason_code_text(reason).c_str()); |
| BTM_LogHistory(kBtmLogTag, bd_addr, "Disconnected", |
| base::StringPrintf("handle:0x%04x reason:%s", hci_handle, |
| hci_reason_code_text(reason).c_str())); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_sco_acl_removed |
| * |
| * Description This function is called when an ACL connection is |
| * removed. If the BD address is NULL, it is assumed that |
| * the local device is down, and all SCO links are removed. |
| * If a specific BD address is passed, only SCO connections |
| * to that BD address are removed. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_sco_acl_removed(const RawAddress* bda) { |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| uint16_t xx; |
| |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if (p->state != SCO_ST_UNUSED) { |
| if ((!bda) || (p->esco.data.bd_addr == *bda && p->rem_bd_known)) { |
| btm_sco_flush_sco_data(xx); |
| |
| p->state = SCO_ST_UNUSED; |
| p->esco.p_esco_cback = NULL; /* Deregister eSCO callback */ |
| (*p->p_disc_cb)(xx); |
| } |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_ReadScoBdAddr |
| * |
| * Description This function is read the remote BD Address for a specific |
| * SCO connection, |
| * |
| * Returns pointer to BD address or NULL if not known |
| * |
| ******************************************************************************/ |
| const RawAddress* BTM_ReadScoBdAddr(uint16_t sco_inx) { |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[sco_inx]; |
| |
| /* Validity check */ |
| if ((sco_inx < BTM_MAX_SCO_LINKS) && (p->rem_bd_known)) |
| return &(p->esco.data.bd_addr); |
| else |
| return (NULL); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_SetEScoMode |
| * |
| * Description This function sets up the negotiated parameters for SCO or |
| * eSCO, and sets as the default mode used for outgoing calls |
| * to BTM_CreateSco. It does not change any currently active |
| * (e)SCO links. |
| * Note: Incoming (e)SCO connections will always use packet |
| * types supported by the controller. If eSCO is not |
| * desired the feature should be disabled in the |
| * controller's feature mask. |
| * |
| * Returns BTM_SUCCESS if the successful. |
| * BTM_BUSY if there are one or more active (e)SCO links. |
| * |
| ******************************************************************************/ |
| tBTM_STATUS BTM_SetEScoMode(enh_esco_params_t* p_parms) { |
| ASSERT_LOG(p_parms != nullptr, "eSCO parameters must have a value"); |
| enh_esco_params_t* p_def = &btm_cb.sco_cb.def_esco_parms; |
| |
| if (btm_cb.sco_cb.esco_supported) { |
| *p_def = *p_parms; |
| LOG_DEBUG( |
| "Setting eSCO mode parameters txbw:0x%08x rxbw:0x%08x max_lat:0x%04x" |
| " pkt:0x%04x rtx_effort:0x%02x", |
| p_def->transmit_bandwidth, p_def->receive_bandwidth, |
| p_def->max_latency_ms, p_def->packet_types, |
| p_def->retransmission_effort); |
| } else { |
| /* Load defaults for SCO only */ |
| *p_def = esco_parameters_for_codec(SCO_CODEC_CVSD_D1); |
| LOG_WARN("eSCO not supported so setting SCO parameters instead"); |
| LOG_DEBUG( |
| "Setting SCO mode parameters txbw:0x%08x rxbw:0x%08x max_lat:0x%04x" |
| " pkt:0x%04x rtx_effort:0x%02x", |
| p_def->transmit_bandwidth, p_def->receive_bandwidth, |
| p_def->max_latency_ms, p_def->packet_types, |
| p_def->retransmission_effort); |
| } |
| return BTM_SUCCESS; |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_RegForEScoEvts |
| * |
| * Description This function registers a SCO event callback with the |
| * specified instance. It should be used to received |
| * connection indication events and change of link parameter |
| * events. |
| * |
| * Returns BTM_SUCCESS if the successful. |
| * BTM_ILLEGAL_VALUE if there is an illegal sco_inx |
| * BTM_MODE_UNSUPPORTED if controller version is not BT1.2 or |
| * later or does not support eSCO. |
| * |
| ******************************************************************************/ |
| tBTM_STATUS BTM_RegForEScoEvts(uint16_t sco_inx, |
| tBTM_ESCO_CBACK* p_esco_cback) { |
| if (BTM_MAX_SCO_LINKS == 0) { |
| return BTM_MODE_UNSUPPORTED; |
| } |
| |
| if (!btm_cb.sco_cb.esco_supported) { |
| btm_cb.sco_cb.sco_db[sco_inx].esco.p_esco_cback = NULL; |
| return (BTM_MODE_UNSUPPORTED); |
| } |
| |
| if (sco_inx < BTM_MAX_SCO_LINKS && |
| btm_cb.sco_cb.sco_db[sco_inx].state != SCO_ST_UNUSED) { |
| btm_cb.sco_cb.sco_db[sco_inx].esco.p_esco_cback = p_esco_cback; |
| return (BTM_SUCCESS); |
| } |
| return (BTM_ILLEGAL_VALUE); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_ChangeEScoLinkParms |
| * |
| * Description This function requests renegotiation of the parameters on |
| * the current eSCO Link. If any of the changes are accepted |
| * by the controllers, the BTM_ESCO_CHG_EVT event is sent in |
| * the tBTM_ESCO_CBACK function with the current settings of |
| * the link. The callback is registered through the call to |
| * BTM_SetEScoMode. |
| * |
| * Note: If called over a SCO link (including 1.1 controller), |
| * a change packet type request is sent out instead. |
| * |
| * Returns BTM_CMD_STARTED if command is successfully initiated. |
| * BTM_NO_RESOURCES - not enough resources to initiate command. |
| * BTM_WRONG_MODE if no connection with a peer device or bad |
| * sco_inx. |
| * |
| ******************************************************************************/ |
| tBTM_STATUS BTM_ChangeEScoLinkParms(uint16_t sco_inx, |
| tBTM_CHG_ESCO_PARAMS* p_parms) { |
| if (BTM_MAX_SCO_LINKS == 0) { |
| return BTM_WRONG_MODE; |
| } |
| |
| /* Make sure sco handle is valid and on an active link */ |
| if (sco_inx >= BTM_MAX_SCO_LINKS || |
| btm_cb.sco_cb.sco_db[sco_inx].state != SCO_ST_CONNECTED) |
| return (BTM_WRONG_MODE); |
| |
| tSCO_CONN* p_sco = &btm_cb.sco_cb.sco_db[sco_inx]; |
| enh_esco_params_t* p_setup = &p_sco->esco.setup; |
| |
| /* Save the previous types in case command fails */ |
| uint16_t saved_packet_types = p_setup->packet_types; |
| |
| /* If SCO connection OR eSCO not supported just send change packet types */ |
| if (p_sco->esco.data.link_type == BTM_LINK_TYPE_SCO || |
| !btm_cb.sco_cb.esco_supported) { |
| p_setup->packet_types = |
| p_parms->packet_types & |
| (btm_cb.btm_sco_pkt_types_supported & BTM_SCO_LINK_ONLY_MASK); |
| |
| BTM_TRACE_API("%s: SCO Link for handle 0x%04x, pkt 0x%04x", __func__, |
| p_sco->hci_handle, p_setup->packet_types); |
| |
| BTM_TRACE_API("%s: SCO Link for handle 0x%04x, pkt 0x%04x", __func__, |
| p_sco->hci_handle, p_setup->packet_types); |
| |
| btsnd_hcic_change_conn_type(p_sco->hci_handle, |
| BTM_ESCO_2_SCO(p_setup->packet_types)); |
| } else /* eSCO is supported and the link type is eSCO */ |
| { |
| uint16_t temp_packet_types = |
| (p_parms->packet_types & BTM_SCO_SUPPORTED_PKTS_MASK & |
| btm_cb.btm_sco_pkt_types_supported); |
| |
| /* OR in any exception packet types */ |
| temp_packet_types |= |
| ((p_parms->packet_types & BTM_SCO_EXCEPTION_PKTS_MASK) | |
| (btm_cb.btm_sco_pkt_types_supported & BTM_SCO_EXCEPTION_PKTS_MASK)); |
| p_setup->packet_types = temp_packet_types; |
| |
| BTM_TRACE_API("%s -> eSCO Link for handle 0x%04x", __func__, |
| p_sco->hci_handle); |
| BTM_TRACE_API( |
| " txbw 0x%x, rxbw 0x%x, lat 0x%x, retrans 0x%02x, pkt 0x%04x", |
| p_setup->transmit_bandwidth, p_setup->receive_bandwidth, |
| p_parms->max_latency_ms, p_parms->retransmission_effort, |
| temp_packet_types); |
| |
| /* Use Enhanced Synchronous commands if supported */ |
| if (controller_get_interface() |
| ->supports_enhanced_setup_synchronous_connection()) { |
| /* Use the saved SCO routing */ |
| p_setup->input_data_path = p_setup->output_data_path = |
| btm_cb.sco_cb.sco_route; |
| |
| btsnd_hcic_enhanced_set_up_synchronous_connection(p_sco->hci_handle, |
| p_setup); |
| p_setup->packet_types = saved_packet_types; |
| } else { /* Use older command */ |
| uint16_t voice_content_format = btm_sco_voice_settings_to_legacy(p_setup); |
| /* When changing an existing link, only change latency, retrans, and |
| * pkts */ |
| btsnd_hcic_setup_esco_conn(p_sco->hci_handle, p_setup->transmit_bandwidth, |
| p_setup->receive_bandwidth, |
| p_parms->max_latency_ms, voice_content_format, |
| p_parms->retransmission_effort, |
| p_setup->packet_types); |
| } |
| |
| BTM_TRACE_API( |
| "%s: txbw 0x%x, rxbw 0x%x, lat 0x%x, retrans 0x%02x, pkt 0x%04x", |
| __func__, p_setup->transmit_bandwidth, p_setup->receive_bandwidth, |
| p_parms->max_latency_ms, p_parms->retransmission_effort, |
| temp_packet_types); |
| } |
| |
| return (BTM_CMD_STARTED); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_EScoConnRsp |
| * |
| * Description This function is called upon receipt of an (e)SCO connection |
| * request event (BTM_ESCO_CONN_REQ_EVT) to accept or reject |
| * the request. Parameters used to negotiate eSCO links. |
| * If p_parms is NULL, then values set through BTM_SetEScoMode |
| * are used. |
| * If the link type of the incoming request is SCO, then only |
| * the tx_bw, max_latency, content format, and packet_types are |
| * valid. The hci_status parameter should be |
| * ([0x0] to accept, [0x0d..0x0f] to reject) |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void BTM_EScoConnRsp(uint16_t sco_inx, uint8_t hci_status, |
| enh_esco_params_t* p_parms) { |
| if (sco_inx < BTM_MAX_SCO_LINKS && |
| btm_cb.sco_cb.sco_db[sco_inx].state == SCO_ST_W4_CONN_RSP) { |
| btm_esco_conn_rsp(sco_inx, hci_status, |
| btm_cb.sco_cb.sco_db[sco_inx].esco.data.bd_addr, p_parms); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_esco_proc_conn_chg |
| * |
| * Description This function is called by BTIF when an SCO connection |
| * is changed. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| void btm_esco_proc_conn_chg(uint8_t status, uint16_t handle, |
| uint8_t tx_interval, uint8_t retrans_window, |
| uint16_t rx_pkt_len, uint16_t tx_pkt_len) { |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| tBTM_CHG_ESCO_EVT_DATA data; |
| uint16_t xx; |
| |
| BTM_TRACE_EVENT("btm_esco_proc_conn_chg -> handle 0x%04x, status 0x%02x", |
| handle, status); |
| |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if (p->state == SCO_ST_CONNECTED && handle == p->hci_handle) { |
| /* If upper layer wants notification */ |
| if (p->esco.p_esco_cback) { |
| data.bd_addr = p->esco.data.bd_addr; |
| data.hci_status = status; |
| data.sco_inx = xx; |
| data.rx_pkt_len = p->esco.data.rx_pkt_len = rx_pkt_len; |
| data.tx_pkt_len = p->esco.data.tx_pkt_len = tx_pkt_len; |
| data.tx_interval = p->esco.data.tx_interval = tx_interval; |
| data.retrans_window = p->esco.data.retrans_window = retrans_window; |
| |
| tBTM_ESCO_EVT_DATA btm_esco_evt_data; |
| btm_esco_evt_data.chg_evt = data; |
| (*p->esco.p_esco_cback)(BTM_ESCO_CHG_EVT, &btm_esco_evt_data); |
| } |
| return; |
| } |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_is_sco_active |
| * |
| * Description This function is called to see if a SCO handle is already in |
| * use. |
| * |
| * Returns bool |
| * |
| ******************************************************************************/ |
| bool btm_is_sco_active(uint16_t handle) { |
| uint16_t xx; |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if (handle == p->hci_handle && p->state == SCO_ST_CONNECTED) return (true); |
| } |
| return (false); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_GetNumScoLinks |
| * |
| * Description This function returns the number of active sco links. |
| * |
| * Returns uint8_t |
| * |
| ******************************************************************************/ |
| uint8_t BTM_GetNumScoLinks(void) { |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| uint16_t xx; |
| uint8_t num_scos = 0; |
| |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| switch (p->state) { |
| case SCO_ST_W4_CONN_RSP: |
| case SCO_ST_CONNECTING: |
| case SCO_ST_CONNECTED: |
| case SCO_ST_DISCONNECTING: |
| case SCO_ST_PEND_UNPARK: |
| num_scos++; |
| break; |
| default: |
| break; |
| } |
| } |
| return (num_scos); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function BTM_IsScoActiveByBdaddr |
| * |
| * Description This function is called to see if a SCO connection is active |
| * for a bd address. |
| * |
| * Returns bool |
| * |
| ******************************************************************************/ |
| bool BTM_IsScoActiveByBdaddr(const RawAddress& remote_bda) { |
| uint8_t xx; |
| tSCO_CONN* p = &btm_cb.sco_cb.sco_db[0]; |
| |
| /* If any SCO is being established to the remote BD address, refuse this */ |
| for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++) { |
| if (p->esco.data.bd_addr == remote_bda && p->state == SCO_ST_CONNECTED) { |
| return (true); |
| } |
| } |
| return (false); |
| } |
| |
| /******************************************************************************* |
| * |
| * Function btm_sco_voice_settings_2_legacy |
| * |
| * Description This function is called to convert the Enhanced eSCO |
| * parameters into voice setting parameter mask used |
| * for legacy setup synchronous connection HCI commands |
| * |
| * Returns UINT16 - 16-bit mask for voice settings |
| * |
| * HCI_INP_CODING_LINEAR 0x0000 (0000000000) |
| * HCI_INP_CODING_U_LAW 0x0100 (0100000000) |
| * HCI_INP_CODING_A_LAW 0x0200 (1000000000) |
| * HCI_INP_CODING_MASK 0x0300 (1100000000) |
| * |
| * HCI_INP_DATA_FMT_1S_COMPLEMENT 0x0000 (0000000000) |
| * HCI_INP_DATA_FMT_2S_COMPLEMENT 0x0040 (0001000000) |
| * HCI_INP_DATA_FMT_SIGN_MAGNITUDE 0x0080 (0010000000) |
| * HCI_INP_DATA_FMT_UNSIGNED 0x00c0 (0011000000) |
| * HCI_INP_DATA_FMT_MASK 0x00c0 (0011000000) |
| * |
| * HCI_INP_SAMPLE_SIZE_8BIT 0x0000 (0000000000) |
| * HCI_INP_SAMPLE_SIZE_16BIT 0x0020 (0000100000) |
| * HCI_INP_SAMPLE_SIZE_MASK 0x0020 (0000100000) |
| * |
| * HCI_INP_LINEAR_PCM_BIT_POS_MASK 0x001c (0000011100) |
| * HCI_INP_LINEAR_PCM_BIT_POS_OFFS 2 |
| * |
| * HCI_AIR_CODING_FORMAT_CVSD 0x0000 (0000000000) |
| * HCI_AIR_CODING_FORMAT_U_LAW 0x0001 (0000000001) |
| * HCI_AIR_CODING_FORMAT_A_LAW 0x0002 (0000000010) |
| * HCI_AIR_CODING_FORMAT_TRANSPNT 0x0003 (0000000011) |
| * HCI_AIR_CODING_FORMAT_MASK 0x0003 (0000000011) |
| * |
| * default (0001100000) |
| * HCI_DEFAULT_VOICE_SETTINGS (HCI_INP_CODING_LINEAR \ |
| * | HCI_INP_DATA_FMT_2S_COMPLEMENT \ |
| * | HCI_INP_SAMPLE_SIZE_16BIT \ |
| * | HCI_AIR_CODING_FORMAT_CVSD) |
| * |
| ******************************************************************************/ |
| static uint16_t btm_sco_voice_settings_to_legacy(enh_esco_params_t* p_params) { |
| uint16_t voice_settings = 0; |
| |
| /* Convert Input Coding Format: If no uLaw or aLAW then Linear will be used |
| * (0) */ |
| if (p_params->input_coding_format.coding_format == ESCO_CODING_FORMAT_ULAW) |
| voice_settings |= HCI_INP_CODING_U_LAW; |
| else if (p_params->input_coding_format.coding_format == |
| ESCO_CODING_FORMAT_ALAW) |
| voice_settings |= HCI_INP_CODING_A_LAW; |
| /* else default value of '0 is good 'Linear' */ |
| |
| /* Convert Input Data Format. Use 2's Compliment as the default */ |
| switch (p_params->input_pcm_data_format) { |
| case ESCO_PCM_DATA_FORMAT_1_COMP: |
| /* voice_settings |= HCI_INP_DATA_FMT_1S_COMPLEMENT; value is '0' |
| * already */ |
| break; |
| |
| case ESCO_PCM_DATA_FORMAT_SIGN: |
| voice_settings |= HCI_INP_DATA_FMT_SIGN_MAGNITUDE; |
| break; |
| |
| case ESCO_PCM_DATA_FORMAT_UNSIGN: |
| voice_settings |= HCI_INP_DATA_FMT_UNSIGNED; |
| break; |
| |
| default: /* 2's Compliment */ |
| voice_settings |= HCI_INP_DATA_FMT_2S_COMPLEMENT; |
| break; |
| } |
| |
| /* Convert Over the Air Coding. Use CVSD as the default */ |
| switch (p_params->transmit_coding_format.coding_format) { |
| case ESCO_CODING_FORMAT_ULAW: |
| voice_settings |= HCI_AIR_CODING_FORMAT_U_LAW; |
| break; |
| |
| case ESCO_CODING_FORMAT_ALAW: |
| voice_settings |= HCI_AIR_CODING_FORMAT_A_LAW; |
| break; |
| |
| case ESCO_CODING_FORMAT_MSBC: |
| voice_settings |= HCI_AIR_CODING_FORMAT_TRANSPNT; |
| break; |
| |
| default: /* CVSD (0) */ |
| break; |
| } |
| |
| /* Convert PCM payload MSB position (0000011100) */ |
| voice_settings |= (uint16_t)(((p_params->input_pcm_payload_msb_position & 0x7) |
| << HCI_INP_LINEAR_PCM_BIT_POS_OFFS)); |
| |
| /* Convert Input Sample Size (0000011100) */ |
| if (p_params->input_coded_data_size == 16) |
| voice_settings |= HCI_INP_SAMPLE_SIZE_16BIT; |
| else /* Use 8 bit for all others */ |
| voice_settings |= HCI_INP_SAMPLE_SIZE_8BIT; |
| |
| BTM_TRACE_DEBUG("%s: voice setting for legacy 0x%03x", __func__, |
| voice_settings); |
| |
| return (voice_settings); |
| } |
