stack/btm/ble_scanner_hci_interface.cc - platform/system/bt - Git at Google

 /*
  * Copyright 2019 HIMSA II K/S - www.himsa.com.
  * Represented by EHIMA - www.ehima.com
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "ble_scanner_hci_interface.h"

 #include <base/bind.h>

 #include "acl_api.h"
 #include "btm_api.h"
 #include "device/include/controller.h"
 #include "hcidefs.h"
 #include "hcimsgs.h"

 #include "osi/include/log.h"

 namespace {
 BleScannerHciInterface* instance = nullptr;

 static void status_callback(base::Callback<void(uint8_t)> cb, uint8_t* data,
                             uint16_t len) {
   uint8_t status;

   LOG_ASSERT(len == 1) << "Received bad response length: " << len;
   STREAM_TO_UINT8(status, data);

   DVLOG(1) << __func__ << " Received status_cb";
   cb.Run(status);
 }

 static void status_handle_callback(base::Callback<void(uint8_t, uint16_t)> cb,
                                    uint8_t* data, uint16_t len) {
   uint8_t status;
   uint16_t handle = HCI_INVALID_HANDLE;

   LOG_ASSERT((len > 0) && (len < 4)) << "Received bad response length: " << len;
   uint8_t* pp = data;
   STREAM_TO_UINT8(status, pp);

   if (status == HCI_SUCCESS) {
     LOG_ASSERT(len == 3) << "Received bad response length: " << len;

     STREAM_TO_UINT16(handle, pp);
     handle = handle & 0x0EFF;

     DVLOG(1) << __func__ << " Received status_handle_callback";
   } else {
     DVLOG(1) << __func__ << " hci response error code: " << int{status};
   }
   cb.Run(status, handle);
 }

 /**
  * BleScannerHciInterface allows the caller to sync to a periodic advertising
  * train and receive periodic advertising data events through a registered
  * observer's callbacks. It also provides a synchronisation transfer API,
  * including in-controller allow list support. The right feature-complete
  * interface implementation is chosen during the init phase based on the
  * controller's list of supported features.
  */
 class BleScannerImplBase : public BleScannerHciInterface {
  public:
   void SetScanEventObserver(ScanEventObserver* observer) override {
     VLOG(1) << __func__;
     // TODO: Support multiple observers if ever needed.
     scan_event_observer = observer;
   }

   void PeriodicScanStart(uint8_t options, uint8_t set_id, uint8_t adv_addr_type,
                          const RawAddress& adv_addr, uint16_t skip_num,
                          uint16_t sync_timeout,
                          uint8_t sync_cte_type) override {
     VLOG(1) << __func__;
     btsnd_hcic_ble_periodic_advertising_create_sync(
         options, set_id, adv_addr_type, adv_addr, skip_num, sync_timeout,
         sync_cte_type);
   }

   void PeriodicScanCancelStart(status_cb command_complete) override {
     VLOG(1) << __func__;
     btsnd_hcic_ble_periodic_advertising_create_sync_cancel(
         base::Bind(&status_callback, std::move(command_complete)));
   }

   void PeriodicScanTerminate(uint16_t sync_handle,
                              status_cb command_complete) override {
     VLOG(1) << __func__;
     btsnd_hcic_ble_periodic_advertising_terminate_sync(
         sync_handle, base::Bind(&status_callback, std::move(command_complete)));
   }

   void PeriodicScanResultEvtEnable(uint16_t sync_handle, bool enable,
                                    status_cb command_complete) override {
     VLOG(1) << __func__;
     btsnd_hcic_ble_set_periodic_advertising_receive_enable(
         sync_handle, enable,
         base::Bind(&status_callback, std::move(command_complete)));
   }

   void PeriodicAdvertiserListGetSize(
       BleScannerHciInterface::list_size_cb command_complete) override {
     VLOG(1) << __func__;
     command_complete.Run(
         controller_get_interface()->get_ble_periodic_advertiser_list_size());
   }

   void PeriodicAdvertiserListAddDevice(uint8_t adv_addr_type,
                                        RawAddress& adv_addr, uint8_t set_id,
                                        status_cb command_complete) override {
     VLOG(1) << __func__;
     btsnd_hci_ble_add_device_to_periodic_advertiser_list(
         adv_addr_type, adv_addr, set_id,
         base::Bind(&status_callback, std::move(command_complete)));
   }

   void PeriodicAdvertiserListRemoveDevice(uint8_t adv_addr_type,
                                           RawAddress& adv_addr, uint8_t set_id,
                                           status_cb command_complete) override {
     VLOG(1) << __func__;
     btsnd_hci_ble_remove_device_from_periodic_advertiser_list(
         adv_addr_type, adv_addr, set_id,
         base::Bind(&status_callback, std::move(command_complete)));
   }

   void PeriodicAdvertiserListClear(status_cb command_complete) override {
     VLOG(1) << __func__;
     btsnd_hci_ble_clear_periodic_advertiser_list(
         base::Bind(&status_callback, std::move(command_complete)));
   };

   void PeriodicAdvSyncTransfer(
       const RawAddress& bd_addr, uint16_t service_data, uint16_t sync_handle,
       BleScannerHciInterface::handle_cb command_complete) override {
     VLOG(1) << __func__;
     uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

     if (acl_handle == HCI_INVALID_HANDLE) {
       LOG(ERROR) << __func__
                  << ": Wrong mode: no LE link exist or LE not supported";
       return;
     }

     btsnd_hcic_ble_periodic_advertising_sync_transfer(
         acl_handle, service_data, sync_handle,
         base::Bind(&status_handle_callback, std::move(command_complete)));
   }

   void PeriodicAdvSetInfoTransfer(const RawAddress& bd_addr,
                                   uint16_t service_data, uint8_t adv_handle,
                                   handle_cb command_complete) override {
     VLOG(1) << __func__;
     uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

     if (acl_handle == HCI_INVALID_HANDLE) {
       LOG(ERROR) << __func__
                  << ": Wrong mode: no LE link exist or LE not supported";
       return;
     }

     btsnd_hcic_ble_periodic_advertising_set_info_transfer(
         acl_handle, service_data, adv_handle,
         base::Bind(&status_handle_callback, std::move(command_complete)));
   }

   void SetPeriodicAdvSyncTransferParams(const RawAddress& bd_addr, uint8_t mode,
                                         uint16_t skip, uint16_t sync_timeout,
                                         uint8_t cte_type, bool set_defaults,
                                         status_cb command_complete) override {
     VLOG(1) << __func__;
     uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

     if (acl_handle == HCI_INVALID_HANDLE) {
       LOG(ERROR) << __func__
                  << ": Wrong mode: no LE link exist or LE not supported";
       return;
     }

     if (set_defaults)
       btsnd_hcic_ble_set_default_periodic_advertising_sync_transfer_params(
           acl_handle, mode, skip, sync_timeout, cte_type,
           base::Bind(&status_callback, std::move(command_complete)));
     else
       btsnd_hcic_ble_set_periodic_advertising_sync_transfer_params(
           acl_handle, mode, skip, sync_timeout, cte_type,
           base::Bind(&status_callback, std::move(command_complete)));
   }

   void OnPeriodicAdvSyncEstablished(uint8_t status, uint16_t sync_handle,
                                     uint8_t adv_sid, uint8_t adv_addr_type,
                                     RawAddress adv_addr, uint8_t adv_phy,
                                     uint16_t adv_interval,
                                     uint8_t adv_clock_accuracy) {
     if (scan_event_observer) {
       scan_event_observer->OnPeriodicScanEstablished(
           status, sync_handle, adv_sid, adv_addr_type, adv_addr, adv_phy,
           adv_interval, adv_clock_accuracy);
     }
   }

   void OnPeriodicScanResult(uint16_t sync_handle, uint8_t tx_power, int8_t rssi,
                             uint8_t cte_type, uint8_t pkt_data_status,
                             uint8_t pkt_data_len, uint8_t* p_pkt_data) {
     // The observer should handle the caching and reassembly of the fragmented
     // packet.
     if (scan_event_observer) {
       scan_event_observer->OnPeriodicScanResult(sync_handle, tx_power, rssi,
                                                 cte_type, pkt_data_status,
                                                 pkt_data_len, p_pkt_data);
     }
   }

   void OnPeriodicSyncLost(uint16_t sync_handle) {
     if (scan_event_observer)
       scan_event_observer->OnPeriodicScanLost(sync_handle);
   }

  private:
   ScanEventObserver* scan_event_observer = nullptr;
 };

 class BleScannerListImpl : public virtual BleScannerImplBase {
   void PeriodicAdvertiserListAddDevice(uint8_t adv_addr_type,
                                        RawAddress& adv_addr, uint8_t set_id,
                                        status_cb command_complete) override {
     VLOG(1) << __func__;
     btsnd_hci_ble_add_device_to_periodic_advertiser_list(
         adv_addr_type, adv_addr, set_id,
         base::Bind(&status_callback, std::move(command_complete)));
   }

   void PeriodicAdvertiserListRemoveDevice(uint8_t adv_addr_type,
                                           RawAddress& adv_addr, uint8_t set_id,
                                           status_cb command_complete) override {
     VLOG(1) << __func__;
     btsnd_hci_ble_remove_device_from_periodic_advertiser_list(
         adv_addr_type, adv_addr, set_id,
         base::Bind(&status_callback, std::move(command_complete)));
   }

   void PeriodicAdvertiserListClear(status_cb command_complete) override {
     VLOG(1) << __func__;
     btsnd_hci_ble_clear_periodic_advertiser_list(
         base::Bind(&status_callback, std::move(command_complete)));
   };
 };

 class BleScannerSyncTransferImpl : public virtual BleScannerImplBase {
   void PeriodicAdvSyncTransfer(
       const RawAddress& bd_addr, uint16_t service_data, uint16_t sync_handle,
       BleScannerHciInterface::handle_cb command_complete) override {
     uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

     if (acl_handle == HCI_INVALID_HANDLE) {
       LOG(ERROR) << __func__
                  << ": Wrong mode: no LE link exist or LE not supported";
       return;
     }

     btsnd_hcic_ble_periodic_advertising_sync_transfer(
         acl_handle, service_data, sync_handle,
         base::Bind(&status_handle_callback, std::move(command_complete)));
   }

   void PeriodicAdvSetInfoTransfer(const RawAddress& bd_addr,
                                   uint16_t service_data, uint8_t adv_handle,
                                   handle_cb command_complete) override {
     uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

     if (acl_handle == HCI_INVALID_HANDLE) {
       LOG(ERROR) << __func__
                  << ": Wrong mode: no LE link exist or LE not supported";
       return;
     }

     btsnd_hcic_ble_periodic_advertising_set_info_transfer(
         acl_handle, service_data, adv_handle,
         base::Bind(&status_handle_callback, std::move(command_complete)));
   }

   void SetPeriodicAdvSyncTransferParams(const RawAddress& bd_addr, uint8_t mode,
                                         uint16_t skip, uint16_t sync_timeout,
                                         uint8_t cte_type, bool set_defaults,
                                         status_cb command_complete) override {
     uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

     if (acl_handle == HCI_INVALID_HANDLE) {
       LOG(ERROR) << __func__
                  << ": Wrong mode: no LE link exist or LE not supported";
       return;
     }

     if (set_defaults)
       btsnd_hcic_ble_set_default_periodic_advertising_sync_transfer_params(
           acl_handle, mode, skip, sync_timeout, cte_type,
           base::Bind(&status_callback, std::move(command_complete)));
     else
       btsnd_hcic_ble_set_periodic_advertising_sync_transfer_params(
           acl_handle, mode, skip, sync_timeout, cte_type,
           base::Bind(&status_callback, std::move(command_complete)));
   }
 };

 class BleScannerCompleteImpl : public BleScannerListImpl,
                                public BleScannerSyncTransferImpl {
   // Not much to do here :)
 };

 }  // namespace

 void BleScannerHciInterface::Initialize() {
   VLOG(1) << __func__;
   LOG_ASSERT(instance == nullptr) << "Was already initialized.";

   if ((controller_get_interface()->get_ble_periodic_advertiser_list_size()) &&
       (controller_get_interface()
            ->supports_ble_periodic_advertising_sync_transfer_sender())) {
     LOG(INFO) << "Advertiser list in controller can be used";
     LOG(INFO) << "Periodic Adv Sync Transfer Sender role is supported";
     instance = new BleScannerCompleteImpl();
   } else if (controller_get_interface()
                  ->supports_ble_periodic_advertising_sync_transfer_sender()) {
     LOG(INFO) << "Periodic Adv Sync Transfer Sender role is supported";
     instance = new BleScannerSyncTransferImpl();
   } else if (controller_get_interface()
                  ->get_ble_periodic_advertiser_list_size()) {
     LOG(INFO) << "Periodic Adv Sync Transfer Recipient role is supported";
     instance = new BleScannerListImpl();
   }
   // TODO: Implement periodic adv. sync. recipient role if ever needed.
 }

 BleScannerHciInterface* BleScannerHciInterface::Get() { return instance; }

 void BleScannerHciInterface::CleanUp() {
   VLOG(1) << __func__;

   delete instance;
   instance = nullptr;
 }

 void btm_ble_process_periodic_adv_sync_est_evt(uint8_t data_len,
                                                uint8_t* data) {
   uint16_t sync_handle, adv_interval;
   uint8_t status, adv_sid, adv_addr_type, adv_phy, adv_clock_accuracy;
   RawAddress adv_addr;

   VLOG(1) << __func__;

   LOG_ASSERT(data_len == 15)
       << "Malformed LE Periodic Advertising Sync Est. Event from controller";

   STREAM_TO_UINT8(status, data);
   STREAM_TO_UINT16(sync_handle, data);
   STREAM_TO_UINT8(adv_sid, data);
   STREAM_TO_UINT8(adv_addr_type, data);
   STREAM_TO_BDADDR(adv_addr, data);
   STREAM_TO_UINT8(adv_phy, data);
   STREAM_TO_UINT16(adv_interval, data);
   STREAM_TO_UINT8(adv_clock_accuracy, data);

   if (BleScannerHciInterface::Get()) {
     static_cast<BleScannerImplBase*>(BleScannerHciInterface::Get())
         ->OnPeriodicAdvSyncEstablished(status, sync_handle, adv_sid,
                                        adv_addr_type, adv_addr, adv_phy,
                                        adv_interval, adv_clock_accuracy);
   }
 }

 void btm_ble_process_periodic_adv_pkt(uint8_t data_len, uint8_t* data) {
   uint8_t* p = data;
   uint16_t sync_handle;
   uint8_t tx_power, cte_type, pkt_data_status, pkt_data_len;
   int8_t rssi;

   LOG_ASSERT(data_len >= 7)
       << "Malformed LE Periodic Advertising Report Event from controller";

   STREAM_TO_UINT16(sync_handle, p);
   STREAM_TO_UINT8(tx_power, p);
   STREAM_TO_INT8(rssi, p);
   STREAM_TO_UINT8(cte_type, p);
   STREAM_TO_UINT8(pkt_data_status, p);
   STREAM_TO_UINT8(pkt_data_len, p);

   uint8_t* pkt_data = p;
   p += pkt_data_len;

   if (p > data + data_len) {
     LOG(ERROR) << __func__ << " Invalid pkt_data_len: " << int{pkt_data_len};
     return;
   }

   if (rssi >= 21 && rssi <= 126) {
     LOG(ERROR) << __func__
                << " bad rssi value in advertising report: " << int{rssi};
   }

   if (BleScannerHciInterface::Get()) {
     static_cast<BleScannerImplBase*>(BleScannerHciInterface::Get())
         ->OnPeriodicScanResult(sync_handle, tx_power, rssi, cte_type,
                                pkt_data_status, pkt_data_len, pkt_data);
   }
 }

 void btm_ble_process_periodic_adv_sync_lost_evt(uint8_t data_len,
                                                 uint8_t* data) {
   uint16_t sync_handle;

   STREAM_TO_UINT16(sync_handle, data);

   if (BleScannerHciInterface::Get()) {
     static_cast<BleScannerImplBase*>(BleScannerHciInterface::Get())
         ->OnPeriodicSyncLost(sync_handle);
   }
 }
	/*
	* Copyright 2019 HIMSA II K/S - www.himsa.com.
	* Represented by EHIMA - www.ehima.com
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "ble_scanner_hci_interface.h"

	#include <base/bind.h>

	#include "acl_api.h"
	#include "btm_api.h"
	#include "device/include/controller.h"
	#include "hcidefs.h"
	#include "hcimsgs.h"

	#include "osi/include/log.h"

	namespace {
	BleScannerHciInterface* instance = nullptr;

	static void status_callback(base::Callback<void(uint8_t)> cb, uint8_t* data,
	uint16_t len) {
	uint8_t status;

	LOG_ASSERT(len == 1) << "Received bad response length: " << len;
	STREAM_TO_UINT8(status, data);

	DVLOG(1) << __func__ << " Received status_cb";
	cb.Run(status);
	}

	static void status_handle_callback(base::Callback<void(uint8_t, uint16_t)> cb,
	uint8_t* data, uint16_t len) {
	uint8_t status;
	uint16_t handle = HCI_INVALID_HANDLE;

	LOG_ASSERT((len > 0) && (len < 4)) << "Received bad response length: " << len;
	uint8_t* pp = data;
	STREAM_TO_UINT8(status, pp);

	if (status == HCI_SUCCESS) {
	LOG_ASSERT(len == 3) << "Received bad response length: " << len;

	STREAM_TO_UINT16(handle, pp);
	handle = handle & 0x0EFF;

	DVLOG(1) << __func__ << " Received status_handle_callback";
	} else {
	DVLOG(1) << __func__ << " hci response error code: " << int{status};
	}
	cb.Run(status, handle);
	}

	/**
	* BleScannerHciInterface allows the caller to sync to a periodic advertising
	* train and receive periodic advertising data events through a registered
	* observer's callbacks. It also provides a synchronisation transfer API,
	* including in-controller allow list support. The right feature-complete
	* interface implementation is chosen during the init phase based on the
	* controller's list of supported features.
	*/
	class BleScannerImplBase : public BleScannerHciInterface {
	public:
	void SetScanEventObserver(ScanEventObserver* observer) override {
	VLOG(1) << __func__;
	// TODO: Support multiple observers if ever needed.
	scan_event_observer = observer;
	}

	void PeriodicScanStart(uint8_t options, uint8_t set_id, uint8_t adv_addr_type,
	const RawAddress& adv_addr, uint16_t skip_num,
	uint16_t sync_timeout,
	uint8_t sync_cte_type) override {
	VLOG(1) << __func__;
	btsnd_hcic_ble_periodic_advertising_create_sync(
	options, set_id, adv_addr_type, adv_addr, skip_num, sync_timeout,
	sync_cte_type);
	}

	void PeriodicScanCancelStart(status_cb command_complete) override {
	VLOG(1) << __func__;
	btsnd_hcic_ble_periodic_advertising_create_sync_cancel(
	base::Bind(&status_callback, std::move(command_complete)));
	}

	void PeriodicScanTerminate(uint16_t sync_handle,
	status_cb command_complete) override {
	VLOG(1) << __func__;
	btsnd_hcic_ble_periodic_advertising_terminate_sync(
	sync_handle, base::Bind(&status_callback, std::move(command_complete)));
	}

	void PeriodicScanResultEvtEnable(uint16_t sync_handle, bool enable,
	status_cb command_complete) override {
	VLOG(1) << __func__;
	btsnd_hcic_ble_set_periodic_advertising_receive_enable(
	sync_handle, enable,
	base::Bind(&status_callback, std::move(command_complete)));
	}

	void PeriodicAdvertiserListGetSize(
	BleScannerHciInterface::list_size_cb command_complete) override {
	VLOG(1) << __func__;
	command_complete.Run(
	controller_get_interface()->get_ble_periodic_advertiser_list_size());
	}

	void PeriodicAdvertiserListAddDevice(uint8_t adv_addr_type,
	RawAddress& adv_addr, uint8_t set_id,
	status_cb command_complete) override {
	VLOG(1) << __func__;
	btsnd_hci_ble_add_device_to_periodic_advertiser_list(
	adv_addr_type, adv_addr, set_id,
	base::Bind(&status_callback, std::move(command_complete)));
	}

	void PeriodicAdvertiserListRemoveDevice(uint8_t adv_addr_type,
	RawAddress& adv_addr, uint8_t set_id,
	status_cb command_complete) override {
	VLOG(1) << __func__;
	btsnd_hci_ble_remove_device_from_periodic_advertiser_list(
	adv_addr_type, adv_addr, set_id,
	base::Bind(&status_callback, std::move(command_complete)));
	}

	void PeriodicAdvertiserListClear(status_cb command_complete) override {
	VLOG(1) << __func__;
	btsnd_hci_ble_clear_periodic_advertiser_list(
	base::Bind(&status_callback, std::move(command_complete)));
	};

	void PeriodicAdvSyncTransfer(
	const RawAddress& bd_addr, uint16_t service_data, uint16_t sync_handle,
	BleScannerHciInterface::handle_cb command_complete) override {
	VLOG(1) << __func__;
	uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

	if (acl_handle == HCI_INVALID_HANDLE) {
	LOG(ERROR) << __func__
	<< ": Wrong mode: no LE link exist or LE not supported";
	return;
	}

	btsnd_hcic_ble_periodic_advertising_sync_transfer(
	acl_handle, service_data, sync_handle,
	base::Bind(&status_handle_callback, std::move(command_complete)));
	}

	void PeriodicAdvSetInfoTransfer(const RawAddress& bd_addr,
	uint16_t service_data, uint8_t adv_handle,
	handle_cb command_complete) override {
	VLOG(1) << __func__;
	uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

	if (acl_handle == HCI_INVALID_HANDLE) {
	LOG(ERROR) << __func__
	<< ": Wrong mode: no LE link exist or LE not supported";
	return;
	}

	btsnd_hcic_ble_periodic_advertising_set_info_transfer(
	acl_handle, service_data, adv_handle,
	base::Bind(&status_handle_callback, std::move(command_complete)));
	}

	void SetPeriodicAdvSyncTransferParams(const RawAddress& bd_addr, uint8_t mode,
	uint16_t skip, uint16_t sync_timeout,
	uint8_t cte_type, bool set_defaults,
	status_cb command_complete) override {
	VLOG(1) << __func__;
	uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

	if (acl_handle == HCI_INVALID_HANDLE) {
	LOG(ERROR) << __func__
	<< ": Wrong mode: no LE link exist or LE not supported";
	return;
	}

	if (set_defaults)
	btsnd_hcic_ble_set_default_periodic_advertising_sync_transfer_params(
	acl_handle, mode, skip, sync_timeout, cte_type,
	base::Bind(&status_callback, std::move(command_complete)));
	else
	btsnd_hcic_ble_set_periodic_advertising_sync_transfer_params(
	acl_handle, mode, skip, sync_timeout, cte_type,
	base::Bind(&status_callback, std::move(command_complete)));
	}

	void OnPeriodicAdvSyncEstablished(uint8_t status, uint16_t sync_handle,
	uint8_t adv_sid, uint8_t adv_addr_type,
	RawAddress adv_addr, uint8_t adv_phy,
	uint16_t adv_interval,
	uint8_t adv_clock_accuracy) {
	if (scan_event_observer) {
	scan_event_observer->OnPeriodicScanEstablished(
	status, sync_handle, adv_sid, adv_addr_type, adv_addr, adv_phy,
	adv_interval, adv_clock_accuracy);
	}
	}

	void OnPeriodicScanResult(uint16_t sync_handle, uint8_t tx_power, int8_t rssi,
	uint8_t cte_type, uint8_t pkt_data_status,
	uint8_t pkt_data_len, uint8_t* p_pkt_data) {
	// The observer should handle the caching and reassembly of the fragmented
	// packet.
	if (scan_event_observer) {
	scan_event_observer->OnPeriodicScanResult(sync_handle, tx_power, rssi,
	cte_type, pkt_data_status,
	pkt_data_len, p_pkt_data);
	}
	}

	void OnPeriodicSyncLost(uint16_t sync_handle) {
	if (scan_event_observer)
	scan_event_observer->OnPeriodicScanLost(sync_handle);
	}

	private:
	ScanEventObserver* scan_event_observer = nullptr;
	};

	class BleScannerListImpl : public virtual BleScannerImplBase {
	void PeriodicAdvertiserListAddDevice(uint8_t adv_addr_type,
	RawAddress& adv_addr, uint8_t set_id,
	status_cb command_complete) override {
	VLOG(1) << __func__;
	btsnd_hci_ble_add_device_to_periodic_advertiser_list(
	adv_addr_type, adv_addr, set_id,
	base::Bind(&status_callback, std::move(command_complete)));
	}

	void PeriodicAdvertiserListRemoveDevice(uint8_t adv_addr_type,
	RawAddress& adv_addr, uint8_t set_id,
	status_cb command_complete) override {
	VLOG(1) << __func__;
	btsnd_hci_ble_remove_device_from_periodic_advertiser_list(
	adv_addr_type, adv_addr, set_id,
	base::Bind(&status_callback, std::move(command_complete)));
	}

	void PeriodicAdvertiserListClear(status_cb command_complete) override {
	VLOG(1) << __func__;
	btsnd_hci_ble_clear_periodic_advertiser_list(
	base::Bind(&status_callback, std::move(command_complete)));
	};
	};

	class BleScannerSyncTransferImpl : public virtual BleScannerImplBase {
	void PeriodicAdvSyncTransfer(
	const RawAddress& bd_addr, uint16_t service_data, uint16_t sync_handle,
	BleScannerHciInterface::handle_cb command_complete) override {
	uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

	if (acl_handle == HCI_INVALID_HANDLE) {
	LOG(ERROR) << __func__
	<< ": Wrong mode: no LE link exist or LE not supported";
	return;
	}

	btsnd_hcic_ble_periodic_advertising_sync_transfer(
	acl_handle, service_data, sync_handle,
	base::Bind(&status_handle_callback, std::move(command_complete)));
	}

	void PeriodicAdvSetInfoTransfer(const RawAddress& bd_addr,
	uint16_t service_data, uint8_t adv_handle,
	handle_cb command_complete) override {
	uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

	if (acl_handle == HCI_INVALID_HANDLE) {
	LOG(ERROR) << __func__
	<< ": Wrong mode: no LE link exist or LE not supported";
	return;
	}

	btsnd_hcic_ble_periodic_advertising_set_info_transfer(
	acl_handle, service_data, adv_handle,
	base::Bind(&status_handle_callback, std::move(command_complete)));
	}

	void SetPeriodicAdvSyncTransferParams(const RawAddress& bd_addr, uint8_t mode,
	uint16_t skip, uint16_t sync_timeout,
	uint8_t cte_type, bool set_defaults,
	status_cb command_complete) override {
	uint16_t acl_handle = BTM_GetHCIConnHandle(bd_addr, BT_TRANSPORT_LE);

	if (acl_handle == HCI_INVALID_HANDLE) {
	LOG(ERROR) << __func__
	<< ": Wrong mode: no LE link exist or LE not supported";
	return;
	}

	if (set_defaults)
	btsnd_hcic_ble_set_default_periodic_advertising_sync_transfer_params(
	acl_handle, mode, skip, sync_timeout, cte_type,
	base::Bind(&status_callback, std::move(command_complete)));
	else
	btsnd_hcic_ble_set_periodic_advertising_sync_transfer_params(
	acl_handle, mode, skip, sync_timeout, cte_type,
	base::Bind(&status_callback, std::move(command_complete)));
	}
	};

	class BleScannerCompleteImpl : public BleScannerListImpl,
	public BleScannerSyncTransferImpl {
	// Not much to do here :)
	};

	} // namespace

	void BleScannerHciInterface::Initialize() {
	VLOG(1) << __func__;
	LOG_ASSERT(instance == nullptr) << "Was already initialized.";

	if ((controller_get_interface()->get_ble_periodic_advertiser_list_size()) &&
	(controller_get_interface()
	->supports_ble_periodic_advertising_sync_transfer_sender())) {
	LOG(INFO) << "Advertiser list in controller can be used";
	LOG(INFO) << "Periodic Adv Sync Transfer Sender role is supported";
	instance = new BleScannerCompleteImpl();
	} else if (controller_get_interface()
	->supports_ble_periodic_advertising_sync_transfer_sender()) {
	LOG(INFO) << "Periodic Adv Sync Transfer Sender role is supported";
	instance = new BleScannerSyncTransferImpl();
	} else if (controller_get_interface()
	->get_ble_periodic_advertiser_list_size()) {
	LOG(INFO) << "Periodic Adv Sync Transfer Recipient role is supported";
	instance = new BleScannerListImpl();
	}
	// TODO: Implement periodic adv. sync. recipient role if ever needed.
	}

	BleScannerHciInterface* BleScannerHciInterface::Get() { return instance; }

	void BleScannerHciInterface::CleanUp() {
	VLOG(1) << __func__;

	delete instance;
	instance = nullptr;
	}

	void btm_ble_process_periodic_adv_sync_est_evt(uint8_t data_len,
	uint8_t* data) {
	uint16_t sync_handle, adv_interval;
	uint8_t status, adv_sid, adv_addr_type, adv_phy, adv_clock_accuracy;
	RawAddress adv_addr;

	VLOG(1) << __func__;

	LOG_ASSERT(data_len == 15)
	<< "Malformed LE Periodic Advertising Sync Est. Event from controller";

	STREAM_TO_UINT8(status, data);
	STREAM_TO_UINT16(sync_handle, data);
	STREAM_TO_UINT8(adv_sid, data);
	STREAM_TO_UINT8(adv_addr_type, data);
	STREAM_TO_BDADDR(adv_addr, data);
	STREAM_TO_UINT8(adv_phy, data);
	STREAM_TO_UINT16(adv_interval, data);
	STREAM_TO_UINT8(adv_clock_accuracy, data);

	if (BleScannerHciInterface::Get()) {
	static_cast<BleScannerImplBase*>(BleScannerHciInterface::Get())
	->OnPeriodicAdvSyncEstablished(status, sync_handle, adv_sid,
	adv_addr_type, adv_addr, adv_phy,
	adv_interval, adv_clock_accuracy);
	}
	}

	void btm_ble_process_periodic_adv_pkt(uint8_t data_len, uint8_t* data) {
	uint8_t* p = data;
	uint16_t sync_handle;
	uint8_t tx_power, cte_type, pkt_data_status, pkt_data_len;
	int8_t rssi;

	LOG_ASSERT(data_len >= 7)
	<< "Malformed LE Periodic Advertising Report Event from controller";

	STREAM_TO_UINT16(sync_handle, p);
	STREAM_TO_UINT8(tx_power, p);
	STREAM_TO_INT8(rssi, p);
	STREAM_TO_UINT8(cte_type, p);
	STREAM_TO_UINT8(pkt_data_status, p);
	STREAM_TO_UINT8(pkt_data_len, p);

	uint8_t* pkt_data = p;
	p += pkt_data_len;

	if (p > data + data_len) {
	LOG(ERROR) << __func__ << " Invalid pkt_data_len: " << int{pkt_data_len};
	return;
	}

	if (rssi >= 21 && rssi <= 126) {
	LOG(ERROR) << __func__
	<< " bad rssi value in advertising report: " << int{rssi};
	}

	if (BleScannerHciInterface::Get()) {
	static_cast<BleScannerImplBase*>(BleScannerHciInterface::Get())
	->OnPeriodicScanResult(sync_handle, tx_power, rssi, cte_type,
	pkt_data_status, pkt_data_len, pkt_data);
	}
	}

	void btm_ble_process_periodic_adv_sync_lost_evt(uint8_t data_len,
	uint8_t* data) {
	uint16_t sync_handle;

	STREAM_TO_UINT16(sync_handle, data);

	if (BleScannerHciInterface::Get()) {
	static_cast<BleScannerImplBase*>(BleScannerHciInterface::Get())
	->OnPeriodicSyncLost(sync_handle);
	}
	}