/******************************************************************************
 *
 *  Copyright (C) 1999-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

#ifndef HCIMSGS_H
#define HCIMSGS_H

#include "bt_target.h"
#include "hcidefs.h"
#include "bt_types.h"

#ifdef __cplusplus
extern "C" {
#endif

void bte_main_hci_send(BT_HDR *p_msg, UINT16 event);
void bte_main_lpm_allow_bt_device_sleep(void);

/* Message by message.... */

extern BOOLEAN btsnd_hcic_inquiry(const LAP inq_lap, UINT8 duration,
                                  UINT8 response_cnt);

#define HCIC_PARAM_SIZE_INQUIRY 5


#define HCIC_INQ_INQ_LAP_OFF    0
#define HCIC_INQ_DUR_OFF        3
#define HCIC_INQ_RSP_CNT_OFF    4
                                                                    /* Inquiry */

                                                                    /* Inquiry Cancel */
extern BOOLEAN btsnd_hcic_inq_cancel(void);

#define HCIC_PARAM_SIZE_INQ_CANCEL   0

                                                                    /* Periodic Inquiry Mode */
extern BOOLEAN btsnd_hcic_per_inq_mode(UINT16 max_period, UINT16 min_period,
                                       const LAP inq_lap, UINT8 duration,
                                       UINT8 response_cnt);

#define HCIC_PARAM_SIZE_PER_INQ_MODE    9

#define HCI_PER_INQ_MAX_INTRVL_OFF  0
#define HCI_PER_INQ_MIN_INTRVL_OFF  2
#define HCI_PER_INQ_INQ_LAP_OFF     4
#define HCI_PER_INQ_DURATION_OFF    7
#define HCI_PER_INQ_RSP_CNT_OFF     8
                                                                    /* Periodic Inquiry Mode */

                                                                    /* Exit Periodic Inquiry Mode */
extern BOOLEAN btsnd_hcic_exit_per_inq(void);

#define HCIC_PARAM_SIZE_EXIT_PER_INQ   0
                                                                    /* Create Connection */
extern BOOLEAN btsnd_hcic_create_conn(BD_ADDR dest, UINT16 packet_types,
                                      UINT8 page_scan_rep_mode,
                                      UINT8 page_scan_mode,
                                      UINT16 clock_offset,
                                      UINT8 allow_switch);

#define HCIC_PARAM_SIZE_CREATE_CONN  13

#define HCIC_CR_CONN_BD_ADDR_OFF        0
#define HCIC_CR_CONN_PKT_TYPES_OFF      6
#define HCIC_CR_CONN_REP_MODE_OFF       8
#define HCIC_CR_CONN_PAGE_SCAN_MODE_OFF 9
#define HCIC_CR_CONN_CLK_OFF_OFF        10
#define HCIC_CR_CONN_ALLOW_SWITCH_OFF   12
                                                                    /* Create Connection */

                                                                    /* Disconnect */
extern BOOLEAN btsnd_hcic_disconnect(UINT16 handle, UINT8 reason);

#define HCIC_PARAM_SIZE_DISCONNECT 3

#define HCI_DISC_HANDLE_OFF             0
#define HCI_DISC_REASON_OFF             2
                                                                    /* Disconnect */

#if BTM_SCO_INCLUDED == TRUE
                                                                    /* Add SCO Connection */
extern BOOLEAN btsnd_hcic_add_SCO_conn (UINT16 handle, UINT16 packet_types);
#endif /* BTM_SCO_INCLUDED */

#define HCIC_PARAM_SIZE_ADD_SCO_CONN    4

#define HCI_ADD_SCO_HANDLE_OFF          0
#define HCI_ADD_SCO_PACKET_TYPES_OFF    2
                                                                    /* Add SCO Connection */

                                                                    /* Create Connection Cancel */
extern BOOLEAN btsnd_hcic_create_conn_cancel(BD_ADDR dest);

#define HCIC_PARAM_SIZE_CREATE_CONN_CANCEL  6

#define HCIC_CR_CONN_CANCEL_BD_ADDR_OFF     0
                                                                    /* Create Connection Cancel */

                                                                    /* Accept Connection Request */
extern BOOLEAN btsnd_hcic_accept_conn (BD_ADDR bd_addr, UINT8 role);

#define HCIC_PARAM_SIZE_ACCEPT_CONN     7

#define HCI_ACC_CONN_BD_ADDR_OFF        0
#define HCI_ACC_CONN_ROLE_OFF           6
                                                                    /* Accept Connection Request */

                                                                    /* Reject Connection Request */
extern BOOLEAN btsnd_hcic_reject_conn (BD_ADDR bd_addr, UINT8 reason);

#define HCIC_PARAM_SIZE_REJECT_CONN      7

#define HCI_REJ_CONN_BD_ADDR_OFF        0
#define HCI_REJ_CONN_REASON_OFF         6
                                                                    /* Reject Connection Request */

                                                                    /* Link Key Request Reply */
extern BOOLEAN btsnd_hcic_link_key_req_reply (BD_ADDR bd_addr,
                                              LINK_KEY link_key);

#define HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY   22

#define HCI_LINK_KEY_REPLY_BD_ADDR_OFF  0
#define HCI_LINK_KEY_REPLY_LINK_KEY_OFF 6
                                                                    /* Link Key Request Reply  */

                                                                    /* Link Key Request Neg Reply */
extern BOOLEAN btsnd_hcic_link_key_neg_reply (BD_ADDR bd_addr);

#define HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY   6

#define HCI_LINK_KEY_NEG_REP_BD_ADR_OFF 0
                                                                    /* Link Key Request Neg Reply  */

                                                                    /* PIN Code Request Reply */
extern BOOLEAN btsnd_hcic_pin_code_req_reply (BD_ADDR bd_addr,
                                              UINT8 pin_code_len,
                                              PIN_CODE pin_code);

#define HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY   23

#define HCI_PIN_CODE_REPLY_BD_ADDR_OFF  0
#define HCI_PIN_CODE_REPLY_PIN_LEN_OFF  6
#define HCI_PIN_CODE_REPLY_PIN_CODE_OFF 7
                                                                    /* PIN Code Request Reply  */

                                                                    /* Link Key Request Neg Reply */
extern BOOLEAN btsnd_hcic_pin_code_neg_reply (BD_ADDR bd_addr);

#define HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY   6

#define HCI_PIN_CODE_NEG_REP_BD_ADR_OFF 0
                                                                    /* Link Key Request Neg Reply  */

                                                                    /* Change Connection Type */
extern BOOLEAN btsnd_hcic_change_conn_type (UINT16 handle, UINT16 packet_types);

#define HCIC_PARAM_SIZE_CHANGE_CONN_TYPE     4

#define HCI_CHNG_PKT_TYPE_HANDLE_OFF    0
#define HCI_CHNG_PKT_TYPE_PKT_TYPE_OFF  2
                                                                    /* Change Connection Type */

#define HCIC_PARAM_SIZE_CMD_HANDLE      2

#define HCI_CMD_HANDLE_HANDLE_OFF       0

extern BOOLEAN btsnd_hcic_auth_request (UINT16 handle);     /* Authentication Request */

                                                                    /* Set Connection Encryption */
extern BOOLEAN btsnd_hcic_set_conn_encrypt (UINT16 handle, BOOLEAN enable);
#define HCIC_PARAM_SIZE_SET_CONN_ENCRYPT     3


#define HCI_SET_ENCRYPT_HANDLE_OFF      0
#define HCI_SET_ENCRYPT_ENABLE_OFF      2
                                                                    /* Set Connection Encryption */

                                                                    /* Remote Name Request */
extern BOOLEAN btsnd_hcic_rmt_name_req (BD_ADDR bd_addr,
                                        UINT8 page_scan_rep_mode,
                                        UINT8 page_scan_mode,
                                        UINT16 clock_offset);

#define HCIC_PARAM_SIZE_RMT_NAME_REQ   10

#define HCI_RMT_NAME_BD_ADDR_OFF        0
#define HCI_RMT_NAME_REP_MODE_OFF       6
#define HCI_RMT_NAME_PAGE_SCAN_MODE_OFF 7
#define HCI_RMT_NAME_CLK_OFF_OFF        8
                                                                    /* Remote Name Request */

                                                                    /* Remote Name Request Cancel */
extern BOOLEAN btsnd_hcic_rmt_name_req_cancel(BD_ADDR bd_addr);

#define HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL   6

#define HCI_RMT_NAME_CANCEL_BD_ADDR_OFF       0
                                                                    /* Remote Name Request Cancel */

extern BOOLEAN btsnd_hcic_rmt_features_req(UINT16 handle);      /* Remote Features Request */

                                                                    /* Remote Extended Features */
extern BOOLEAN btsnd_hcic_rmt_ext_features(UINT16 handle, UINT8 page_num);

#define HCIC_PARAM_SIZE_RMT_EXT_FEATURES   3

#define HCI_RMT_EXT_FEATURES_HANDLE_OFF    0
#define HCI_RMT_EXT_FEATURES_PAGE_NUM_OFF  2
                                                                    /* Remote Extended Features */


extern BOOLEAN btsnd_hcic_rmt_ver_req(UINT16 handle);           /* Remote Version Info Request */
extern BOOLEAN btsnd_hcic_read_rmt_clk_offset(UINT16 handle);   /* Remote Clock Offset */
extern BOOLEAN btsnd_hcic_read_lmp_handle(UINT16 handle);       /* Remote LMP Handle */

extern BOOLEAN btsnd_hcic_setup_esco_conn (UINT16 handle,
                                           UINT32 tx_bw, UINT32 rx_bw,
                                           UINT16 max_latency, UINT16 voice,
                                           UINT8 retrans_effort,
                                           UINT16 packet_types);
#define HCIC_PARAM_SIZE_SETUP_ESCO      17

#define HCI_SETUP_ESCO_HANDLE_OFF       0
#define HCI_SETUP_ESCO_TX_BW_OFF        2
#define HCI_SETUP_ESCO_RX_BW_OFF        6
#define HCI_SETUP_ESCO_MAX_LAT_OFF      10
#define HCI_SETUP_ESCO_VOICE_OFF        12
#define HCI_SETUP_ESCO_RETRAN_EFF_OFF   14
#define HCI_SETUP_ESCO_PKT_TYPES_OFF    15


extern BOOLEAN btsnd_hcic_accept_esco_conn (BD_ADDR bd_addr,
                                            UINT32 tx_bw, UINT32 rx_bw,
                                            UINT16 max_latency,
                                            UINT16 content_fmt,
                                            UINT8 retrans_effort,
                                            UINT16 packet_types);
#define HCIC_PARAM_SIZE_ACCEPT_ESCO     21

#define HCI_ACCEPT_ESCO_BDADDR_OFF      0
#define HCI_ACCEPT_ESCO_TX_BW_OFF       6
#define HCI_ACCEPT_ESCO_RX_BW_OFF       10
#define HCI_ACCEPT_ESCO_MAX_LAT_OFF     14
#define HCI_ACCEPT_ESCO_VOICE_OFF       16
#define HCI_ACCEPT_ESCO_RETRAN_EFF_OFF  18
#define HCI_ACCEPT_ESCO_PKT_TYPES_OFF   19


extern BOOLEAN btsnd_hcic_reject_esco_conn (BD_ADDR bd_addr, UINT8 reason);
#define HCIC_PARAM_SIZE_REJECT_ESCO     7

#define HCI_REJECT_ESCO_BDADDR_OFF      0
#define HCI_REJECT_ESCO_REASON_OFF      6

/* Hold Mode */
extern BOOLEAN btsnd_hcic_hold_mode(UINT16 handle, UINT16 max_hold_period,
                                    UINT16 min_hold_period);

#define HCIC_PARAM_SIZE_HOLD_MODE       6

#define HCI_HOLD_MODE_HANDLE_OFF        0
#define HCI_HOLD_MODE_MAX_PER_OFF       2
#define HCI_HOLD_MODE_MIN_PER_OFF       4
                                                                    /* Hold Mode */

                                                                    /* Sniff Mode */
extern BOOLEAN btsnd_hcic_sniff_mode(UINT16 handle,
                                     UINT16 max_sniff_period,
                                     UINT16 min_sniff_period,
                                     UINT16 sniff_attempt,
                                     UINT16 sniff_timeout);

#define HCIC_PARAM_SIZE_SNIFF_MODE      10


#define HCI_SNIFF_MODE_HANDLE_OFF       0
#define HCI_SNIFF_MODE_MAX_PER_OFF      2
#define HCI_SNIFF_MODE_MIN_PER_OFF      4
#define HCI_SNIFF_MODE_ATTEMPT_OFF      6
#define HCI_SNIFF_MODE_TIMEOUT_OFF      8
                                                                    /* Sniff Mode */

extern BOOLEAN btsnd_hcic_exit_sniff_mode(UINT16 handle);       /* Exit Sniff Mode */

                                                                    /* Park Mode */
extern BOOLEAN btsnd_hcic_park_mode (UINT16 handle,
                                     UINT16 beacon_max_interval,
                                     UINT16 beacon_min_interval);

#define HCIC_PARAM_SIZE_PARK_MODE       6

#define HCI_PARK_MODE_HANDLE_OFF        0
#define HCI_PARK_MODE_MAX_PER_OFF       2
#define HCI_PARK_MODE_MIN_PER_OFF       4
                                                                    /* Park Mode */

extern BOOLEAN btsnd_hcic_exit_park_mode(UINT16 handle);  /* Exit Park Mode */

                                                                    /* QoS Setup */
extern BOOLEAN btsnd_hcic_qos_setup (UINT16 handle, UINT8 flags,
                                     UINT8 service_type,
                                     UINT32 token_rate, UINT32 peak,
                                     UINT32 latency, UINT32 delay_var);

#define HCIC_PARAM_SIZE_QOS_SETUP       20

#define HCI_QOS_HANDLE_OFF              0
#define HCI_QOS_FLAGS_OFF               2
#define HCI_QOS_SERVICE_TYPE_OFF        3
#define HCI_QOS_TOKEN_RATE_OFF          4
#define HCI_QOS_PEAK_BANDWIDTH_OFF      8
#define HCI_QOS_LATENCY_OFF             12
#define HCI_QOS_DELAY_VAR_OFF           16
                                                                    /* QoS Setup */

                                                                    /* Switch Role Request */
extern BOOLEAN btsnd_hcic_switch_role (BD_ADDR bd_addr, UINT8 role);

#define HCIC_PARAM_SIZE_SWITCH_ROLE  7

#define HCI_SWITCH_BD_ADDR_OFF          0
#define HCI_SWITCH_ROLE_OFF             6
                                                                    /* Switch Role Request */

                                                                    /* Write Policy Settings */
extern BOOLEAN btsnd_hcic_write_policy_set(UINT16 handle, UINT16 settings);

#define HCIC_PARAM_SIZE_WRITE_POLICY_SET     4

#define HCI_WRITE_POLICY_HANDLE_OFF          0
#define HCI_WRITE_POLICY_SETTINGS_OFF        2
                                                                    /* Write Policy Settings */

                                                                    /* Write Default Policy Settings */
extern BOOLEAN btsnd_hcic_write_def_policy_set(UINT16 settings);

#define HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET     2

#define HCI_WRITE_DEF_POLICY_SETTINGS_OFF        0
                                                                    /* Write Default Policy Settings */

/******************************************
**    Lisbon Features
*******************************************/
#if BTM_SSR_INCLUDED == TRUE
                                                                    /* Sniff Subrating */
extern BOOLEAN btsnd_hcic_sniff_sub_rate(UINT16 handle, UINT16 max_lat,
                                         UINT16 min_remote_lat,
                                         UINT16 min_local_lat);

#define HCIC_PARAM_SIZE_SNIFF_SUB_RATE             8

#define HCI_SNIFF_SUB_RATE_HANDLE_OFF              0
#define HCI_SNIFF_SUB_RATE_MAX_LAT_OFF             2
#define HCI_SNIFF_SUB_RATE_MIN_REM_LAT_OFF         4
#define HCI_SNIFF_SUB_RATE_MIN_LOC_LAT_OFF         6
                                                                    /* Sniff Subrating */

#else   /* BTM_SSR_INCLUDED == FALSE */

#define btsnd_hcic_sniff_sub_rate(handle, max_lat, min_remote_lat, min_local_lat) FALSE

#endif  /* BTM_SSR_INCLUDED */

                                                                    /* Extended Inquiry Response */
extern void btsnd_hcic_write_ext_inquiry_response(void *buffer, UINT8 fec_req);

#define HCIC_PARAM_SIZE_EXT_INQ_RESP        241

#define HCIC_EXT_INQ_RESP_FEC_OFF     0
#define HCIC_EXT_INQ_RESP_RESPONSE    1
                                                                   /* IO Capabilities Response */
extern BOOLEAN btsnd_hcic_io_cap_req_reply (BD_ADDR bd_addr, UINT8 capability,
                                            UINT8 oob_present, UINT8 auth_req);

#define HCIC_PARAM_SIZE_IO_CAP_RESP     9

#define HCI_IO_CAP_BD_ADDR_OFF          0
#define HCI_IO_CAPABILITY_OFF           6
#define HCI_IO_CAP_OOB_DATA_OFF         7
#define HCI_IO_CAP_AUTH_REQ_OFF         8

                                                                    /* IO Capabilities Req Neg Reply */
extern BOOLEAN btsnd_hcic_io_cap_req_neg_reply (BD_ADDR bd_addr, UINT8 err_code);

#define HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY 7

#define HCI_IO_CAP_NR_BD_ADDR_OFF        0
#define HCI_IO_CAP_NR_ERR_CODE           6

                                                         /* Read Local OOB Data */
extern BOOLEAN btsnd_hcic_read_local_oob_data (void);

#define HCIC_PARAM_SIZE_R_LOCAL_OOB     0


extern BOOLEAN btsnd_hcic_user_conf_reply (BD_ADDR bd_addr, BOOLEAN is_yes);

#define HCIC_PARAM_SIZE_UCONF_REPLY     6

#define HCI_USER_CONF_BD_ADDR_OFF       0


extern BOOLEAN btsnd_hcic_user_passkey_reply (BD_ADDR bd_addr, UINT32 value);

#define HCIC_PARAM_SIZE_U_PKEY_REPLY    10

#define HCI_USER_PASSKEY_BD_ADDR_OFF    0
#define HCI_USER_PASSKEY_VALUE_OFF      6


extern BOOLEAN btsnd_hcic_user_passkey_neg_reply (BD_ADDR bd_addr);

#define HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY 6

#define HCI_USER_PASSKEY_NEG_BD_ADDR_OFF 0

                                                            /* Remote OOB Data Request Reply */
extern BOOLEAN btsnd_hcic_rem_oob_reply (BD_ADDR bd_addr, UINT8 *p_c,
                                         UINT8 *p_r);

#define HCIC_PARAM_SIZE_REM_OOB_REPLY   38

#define HCI_REM_OOB_DATA_BD_ADDR_OFF    0
#define HCI_REM_OOB_DATA_C_OFF          6
#define HCI_REM_OOB_DATA_R_OFF          22

                                                            /* Remote OOB Data Request Negative Reply */
extern BOOLEAN btsnd_hcic_rem_oob_neg_reply (BD_ADDR bd_addr);

#define HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY   6

#define HCI_REM_OOB_DATA_NEG_BD_ADDR_OFF    0

                                                            /* Read Tx Power Level */
extern BOOLEAN btsnd_hcic_read_inq_tx_power (void);

#define HCIC_PARAM_SIZE_R_TX_POWER      0

                                                            /* Read Default Erroneous Data Reporting */
extern BOOLEAN btsnd_hcic_read_default_erroneous_data_rpt (void);

#define HCIC_PARAM_SIZE_R_ERR_DATA_RPT      0

#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
extern BOOLEAN btsnd_hcic_enhanced_flush (UINT16 handle, UINT8 packet_type);

#define HCIC_PARAM_SIZE_ENHANCED_FLUSH  3
#endif


extern BOOLEAN btsnd_hcic_send_keypress_notif (BD_ADDR bd_addr, UINT8 notif);

#define HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF    7

#define HCI_SEND_KEYPRESS_NOTIF_BD_ADDR_OFF    0
#define HCI_SEND_KEYPRESS_NOTIF_NOTIF_OFF      6

/**** end of Simple Pairing Commands ****/

                                                                    /* Store Current Settings */
#define MAX_FILT_COND   (sizeof (BD_ADDR) + 1)

extern BOOLEAN btsnd_hcic_set_event_filter(UINT8 filt_type,
                                           UINT8 filt_cond_type,
                                           UINT8 *filt_cond,
                                           UINT8 filt_cond_len);

#define HCIC_PARAM_SIZE_SET_EVT_FILTER  9

#define HCI_FILT_COND_FILT_TYPE_OFF     0
#define HCI_FILT_COND_COND_TYPE_OFF     1
#define HCI_FILT_COND_FILT_OFF          2
                                                                    /* Set Event Filter */

                                                                /* Delete Stored Key */
extern BOOLEAN btsnd_hcic_delete_stored_key (BD_ADDR bd_addr, BOOLEAN delete_all_flag);

#define HCIC_PARAM_SIZE_DELETE_STORED_KEY        7

#define HCI_DELETE_KEY_BD_ADDR_OFF      0
#define HCI_DELETE_KEY_ALL_FLAG_OFF     6
                                                                /* Delete Stored Key */

                                                                /* Change Local Name */
extern BOOLEAN btsnd_hcic_change_name(BD_NAME name);

#define HCIC_PARAM_SIZE_CHANGE_NAME     BD_NAME_LEN

#define HCI_CHANGE_NAME_NAME_OFF        0
                                                                /* Change Local Name */


#define HCIC_PARAM_SIZE_READ_CMD     0

#define HCIC_PARAM_SIZE_WRITE_PARAM1     1

#define HCIC_WRITE_PARAM1_PARAM_OFF      0

#define HCIC_PARAM_SIZE_WRITE_PARAM2     2

#define HCIC_WRITE_PARAM2_PARAM_OFF      0

#define HCIC_PARAM_SIZE_WRITE_PARAM3     3

#define HCIC_WRITE_PARAM3_PARAM_OFF      0

#define HCIC_PARAM_SIZE_SET_AFH_CHANNELS    10

extern BOOLEAN btsnd_hcic_write_pin_type(UINT8 type);                   /* Write PIN Type */
extern BOOLEAN btsnd_hcic_write_auto_accept(UINT8 flag);                /* Write Auto Accept */
extern BOOLEAN btsnd_hcic_read_name (void);                             /* Read Local Name */
extern BOOLEAN btsnd_hcic_write_page_tout(UINT16 timeout);              /* Write Page Timout */
extern BOOLEAN btsnd_hcic_write_scan_enable(UINT8 flag);                /* Write Scan Enable */
extern BOOLEAN btsnd_hcic_write_pagescan_cfg(UINT16 interval,
                                             UINT16 window);            /* Write Page Scan Activity */

#define HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG  4

#define HCI_SCAN_CFG_INTERVAL_OFF       0
#define HCI_SCAN_CFG_WINDOW_OFF         2
                                                                /* Write Page Scan Activity */

                                                                /* Write Inquiry Scan Activity */
extern BOOLEAN btsnd_hcic_write_inqscan_cfg(UINT16 interval, UINT16 window);

#define HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG    4

#define HCI_SCAN_CFG_INTERVAL_OFF       0
#define HCI_SCAN_CFG_WINDOW_OFF         2
                                                                /* Write Inquiry Scan Activity */

extern BOOLEAN btsnd_hcic_write_auth_enable(UINT8 flag);                 /* Write Authentication Enable */
extern BOOLEAN btsnd_hcic_write_dev_class(DEV_CLASS dev);                /* Write Class of Device */
extern BOOLEAN btsnd_hcic_write_voice_settings(UINT16 flags);            /* Write Voice Settings */

/* Host Controller to Host flow control */
#define HCI_HOST_FLOW_CTRL_OFF          0
#define HCI_HOST_FLOW_CTRL_ACL_ON       1
#define HCI_HOST_FLOW_CTRL_SCO_ON       2
#define HCI_HOST_FLOW_CTRL_BOTH_ON      3

extern BOOLEAN btsnd_hcic_write_auto_flush_tout(UINT16 handle,
                                                UINT16 timeout);    /* Write Retransmit Timout */

#define HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT    4

#define HCI_FLUSH_TOUT_HANDLE_OFF       0
#define HCI_FLUSH_TOUT_TOUT_OFF         2

extern BOOLEAN btsnd_hcic_read_tx_power(UINT16 handle, UINT8 type);     /* Read Tx Power */

#define HCIC_PARAM_SIZE_READ_TX_POWER    3

#define HCI_READ_TX_POWER_HANDLE_OFF    0
#define HCI_READ_TX_POWER_TYPE_OFF      2

/* Read transmit power level parameter */
#define HCI_READ_CURRENT                0x00
#define HCI_READ_MAXIMUM                0x01

extern BOOLEAN btsnd_hcic_host_num_xmitted_pkts (UINT8 num_handles,
                                                 UINT16 *handle,
                                                 UINT16 *num_pkts);         /* Set Host Buffer Size */

#define HCIC_PARAM_SIZE_NUM_PKTS_DONE_SIZE    sizeof(btmsg_hcic_num_pkts_done_t)

#define MAX_DATA_HANDLES        10

#define HCI_PKTS_DONE_NUM_HANDLES_OFF   0
#define HCI_PKTS_DONE_HANDLE_OFF        1
#define HCI_PKTS_DONE_NUM_PKTS_OFF      3

                                                                /* Write Link Supervision Timeout */
extern BOOLEAN btsnd_hcic_write_link_super_tout(UINT8 local_controller_id, UINT16 handle, UINT16 timeout);

#define HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT        4

#define HCI_LINK_SUPER_TOUT_HANDLE_OFF  0
#define HCI_LINK_SUPER_TOUT_TOUT_OFF    2
                                                                /* Write Link Supervision Timeout */

extern BOOLEAN btsnd_hcic_write_cur_iac_lap (UINT8 num_cur_iac,
                                             LAP * const iac_lap);  /* Write Current IAC LAP */

#define MAX_IAC_LAPS    0x40

#define HCI_WRITE_IAC_LAP_NUM_OFF       0
#define HCI_WRITE_IAC_LAP_LAP_OFF       1
                                                                /* Write Current IAC LAP */

extern BOOLEAN btsnd_hcic_get_link_quality (UINT16 handle);            /* Get Link Quality */
extern BOOLEAN btsnd_hcic_read_rssi (UINT16 handle);                   /* Read RSSI */
extern BOOLEAN btsnd_hcic_enable_test_mode (void);                     /* Enable Device Under Test Mode */
extern BOOLEAN btsnd_hcic_write_pagescan_type(UINT8 type);             /* Write Page Scan Type */
extern BOOLEAN btsnd_hcic_write_inqscan_type(UINT8 type);              /* Write Inquiry Scan Type */
extern BOOLEAN btsnd_hcic_write_inquiry_mode(UINT8 type);              /* Write Inquiry Mode */

#define HCI_DATA_HANDLE_MASK 0x0FFF

#define HCID_GET_HANDLE_EVENT(p)  (UINT16)((*((UINT8 *)((p) + 1) + (p)->offset) + \
                                           (*((UINT8 *)((p) + 1) + (p)->offset + 1) << 8)))

#define HCID_GET_HANDLE(u16) (UINT16)((u16) & HCI_DATA_HANDLE_MASK)

#define HCI_DATA_EVENT_MASK   3
#define HCI_DATA_EVENT_OFFSET 12
#define HCID_GET_EVENT(u16)   (UINT8)(((u16) >> HCI_DATA_EVENT_OFFSET) & HCI_DATA_EVENT_MASK)

#define HCI_DATA_BCAST_MASK   3
#define HCI_DATA_BCAST_OFFSET 10
#define HCID_GET_BCAST(u16)   (UINT8)(((u16) >> HCI_DATA_BCAST_OFFSET) & HCI_DATA_BCAST_MASK)

#define HCID_GET_ACL_LEN(p)     (UINT16)((*((UINT8 *)((p) + 1) + (p)->offset + 2) + \
                                         (*((UINT8 *)((p) + 1) + (p)->offset + 3) << 8)))

#define HCID_HEADER_SIZE      4

#define HCID_GET_SCO_LEN(p)  (*((UINT8 *)((p) + 1) + (p)->offset + 2))

extern void btsnd_hcic_vendor_spec_cmd (void *buffer, UINT16 opcode,
                                        UINT8 len, UINT8 *p_data,
                                        void *p_cmd_cplt_cback);

#if (BLE_INCLUDED == TRUE)
/********************************************************************************
** BLE Commands
**      Note: "local_controller_id" is for transport, not counted in HCI message size
*********************************************************************************/
#define HCIC_BLE_RAND_DI_SIZE                   8
#define HCIC_BLE_ENCRYT_KEY_SIZE                16
#define HCIC_BLE_IRK_SIZE                       16

#define HCIC_PARAM_SIZE_SET_USED_FEAT_CMD       8
#define HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD    6
#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS    15
#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP      31
#define HCIC_PARAM_SIZE_WRITE_ADV_ENABLE        1
#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM    7
#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE   2
#define HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN      25
#define HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL  0
#define HCIC_PARAM_SIZE_CLEAR_WHITE_LIST        0
#define HCIC_PARAM_SIZE_ADD_WHITE_LIST          7
#define HCIC_PARAM_SIZE_REMOVE_WHITE_LIST       7
#define HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS  14
#define HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS     5
#define HCIC_PARAM_SIZE_READ_CHNL_MAP         2
#define HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT    2
#define HCIC_PARAM_SIZE_BLE_ENCRYPT             32
#define HCIC_PARAM_SIZE_BLE_RAND                0
#define HCIC_PARAM_SIZE_WRITE_LE_HOST_SUPPORTED 2

#define HCIC_BLE_RAND_DI_SIZE                   8
#define HCIC_BLE_ENCRYT_KEY_SIZE                16
#define HCIC_PARAM_SIZE_BLE_START_ENC           (4 + HCIC_BLE_RAND_DI_SIZE + HCIC_BLE_ENCRYT_KEY_SIZE)
#define HCIC_PARAM_SIZE_LTK_REQ_REPLY           (2 + HCIC_BLE_ENCRYT_KEY_SIZE)
#define HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY       2
#define HCIC_BLE_CHNL_MAP_SIZE                  5
#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA      31

#define HCIC_PARAM_SIZE_BLE_ADD_DEV_RESOLVING_LIST      (7 + HCIC_BLE_IRK_SIZE * 2)
#define HCIC_PARAM_SIZE_BLE_RM_DEV_RESOLVING_LIST       7
#define HCIC_PARAM_SIZE_BLE_CLEAR_RESOLVING_LIST        0
#define HCIC_PARAM_SIZE_BLE_READ_RESOLVING_LIST_SIZE    0
#define HCIC_PARAM_SIZE_BLE_READ_RESOLVABLE_ADDR_PEER   7
#define HCIC_PARAM_SIZE_BLE_READ_RESOLVABLE_ADDR_LOCAL  7
#define HCIC_PARAM_SIZE_BLE_SET_ADDR_RESOLUTION_ENABLE  1
#define HCIC_PARAM_SIZE_BLE_SET_RAND_PRIV_ADDR_TIMOUT   2
#define HCIC_PARAM_SIZE_BLE_SET_DATA_LENGTH             6
#define HCIC_PARAM_SIZE_BLE_WRITE_EXTENDED_SCAN_PARAM  11

/* ULP HCI command */
extern BOOLEAN btsnd_hcic_ble_set_evt_mask (BT_EVENT_MASK event_mask);

extern BOOLEAN btsnd_hcic_ble_read_buffer_size (void);

extern BOOLEAN btsnd_hcic_ble_read_local_spt_feat (void);

extern BOOLEAN btsnd_hcic_ble_set_local_used_feat (UINT8 feat_set[8]);

extern BOOLEAN btsnd_hcic_ble_set_random_addr (BD_ADDR random_addr);

extern BOOLEAN btsnd_hcic_ble_write_adv_params (UINT16 adv_int_min, UINT16 adv_int_max,
                                                UINT8 adv_type, UINT8 addr_type_own,
                                                UINT8 addr_type_dir, BD_ADDR direct_bda,
                                                UINT8 channel_map, UINT8 adv_filter_policy);

extern BOOLEAN btsnd_hcic_ble_read_adv_chnl_tx_power (void);

extern BOOLEAN btsnd_hcic_ble_set_adv_data (UINT8 data_len, UINT8 *p_data);

extern BOOLEAN btsnd_hcic_ble_set_scan_rsp_data (UINT8 data_len, UINT8 *p_scan_rsp);

extern BOOLEAN btsnd_hcic_ble_set_adv_enable (UINT8 adv_enable);

extern BOOLEAN btsnd_hcic_ble_set_scan_params (UINT8 scan_type,
                                               UINT16 scan_int, UINT16 scan_win,
                                               UINT8 addr_type, UINT8 scan_filter_policy);

extern BOOLEAN btsnd_hcic_ble_set_scan_enable (UINT8 scan_enable, UINT8 duplicate);

extern BOOLEAN btsnd_hcic_ble_create_ll_conn (UINT16 scan_int, UINT16 scan_win,
                                              UINT8 init_filter_policy, UINT8 addr_type_peer, BD_ADDR bda_peer, UINT8 addr_type_own,
                                              UINT16 conn_int_min, UINT16 conn_int_max, UINT16 conn_latency, UINT16 conn_timeout,
                                              UINT16 min_ce_len, UINT16 max_ce_len);

extern BOOLEAN btsnd_hcic_ble_create_conn_cancel (void);

extern BOOLEAN btsnd_hcic_ble_read_white_list_size (void);

extern BOOLEAN btsnd_hcic_ble_clear_white_list (void);

extern BOOLEAN btsnd_hcic_ble_add_white_list (UINT8 addr_type, BD_ADDR bda);

extern BOOLEAN btsnd_hcic_ble_remove_from_white_list (UINT8 addr_type, BD_ADDR bda);

extern BOOLEAN btsnd_hcic_ble_upd_ll_conn_params (UINT16 handle, UINT16 conn_int_min, UINT16 conn_int_max,
                                                  UINT16 conn_latency, UINT16 conn_timeout, UINT16 min_len, UINT16 max_len);

extern BOOLEAN btsnd_hcic_ble_set_host_chnl_class (UINT8 chnl_map[HCIC_BLE_CHNL_MAP_SIZE]);

extern BOOLEAN btsnd_hcic_ble_read_chnl_map (UINT16 handle);

extern BOOLEAN btsnd_hcic_ble_read_remote_feat ( UINT16 handle);

extern BOOLEAN btsnd_hcic_ble_encrypt (UINT8* key, UINT8 key_len, UINT8* plain_text, UINT8 pt_len, void *p_cmd_cplt_cback);

extern BOOLEAN btsnd_hcic_ble_rand (void *p_cmd_cplt_cback);

extern BOOLEAN btsnd_hcic_ble_start_enc ( UINT16 handle,
                                          UINT8 rand[HCIC_BLE_RAND_DI_SIZE],
                                          UINT16 ediv, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]);

extern BOOLEAN btsnd_hcic_ble_ltk_req_reply (UINT16 handle, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]);

extern BOOLEAN btsnd_hcic_ble_ltk_req_neg_reply (UINT16 handle);

extern BOOLEAN btsnd_hcic_ble_read_supported_states (void);

extern BOOLEAN btsnd_hcic_ble_write_host_supported (UINT8 le_host_spt, UINT8 simul_le_host_spt);

extern BOOLEAN btsnd_hcic_ble_read_host_supported (void);

extern BOOLEAN btsnd_hcic_ble_receiver_test(UINT8 rx_freq);

extern BOOLEAN btsnd_hcic_ble_transmitter_test(UINT8 tx_freq, UINT8 test_data_len,
                                               UINT8 payload);
extern BOOLEAN btsnd_hcic_ble_test_end(void);

#if (defined BLE_LLT_INCLUDED) && (BLE_LLT_INCLUDED == TRUE)

#define HCIC_PARAM_SIZE_BLE_RC_PARAM_REQ_REPLY           14
extern BOOLEAN btsnd_hcic_ble_rc_param_req_reply(UINT16 handle,
                                                 UINT16 conn_int_min, UINT16 conn_int_max,
                                                 UINT16 conn_latency, UINT16 conn_timeout,
                                                 UINT16 min_ce_len, UINT16 max_ce_len);

#define HCIC_PARAM_SIZE_BLE_RC_PARAM_REQ_NEG_REPLY       3
extern BOOLEAN btsnd_hcic_ble_rc_param_req_neg_reply(UINT16 handle, UINT8 reason);

#endif /* BLE_LLT_INCLUDED */

extern BOOLEAN btsnd_hcic_ble_set_data_length(UINT16 conn_handle, UINT16 tx_octets,
                                                      UINT16 tx_time);

extern BOOLEAN btsnd_hcic_ble_add_device_resolving_list (UINT8 addr_type_peer,
                                                               BD_ADDR bda_peer,
                                                               UINT8 irk_peer[HCIC_BLE_IRK_SIZE],
                                                               UINT8 irk_local[HCIC_BLE_IRK_SIZE]);

extern BOOLEAN btsnd_hcic_ble_rm_device_resolving_list (UINT8 addr_type_peer,
                                                                BD_ADDR bda_peer);

extern BOOLEAN btsnd_hcic_ble_clear_resolving_list (void);

extern BOOLEAN btsnd_hcic_ble_read_resolvable_addr_peer (UINT8 addr_type_peer,
                                                                 BD_ADDR bda_peer);

extern BOOLEAN btsnd_hcic_ble_read_resolvable_addr_local (UINT8 addr_type_peer,
                                                                 BD_ADDR bda_peer);

extern BOOLEAN btsnd_hcic_ble_set_addr_resolution_enable (UINT8 addr_resolution_enable);

extern BOOLEAN btsnd_hcic_ble_set_rand_priv_addr_timeout (UINT16 rpa_timout);

#endif /* BLE_INCLUDED */

extern BOOLEAN btsnd_hcic_read_authenticated_payload_tout(UINT16 handle);

extern BOOLEAN btsnd_hcic_write_authenticated_payload_tout(UINT16 handle,
                                                                   UINT16 timeout);

#define HCIC_PARAM_SIZE_WRITE_AUTHENT_PAYLOAD_TOUT  4

#define HCI__WRITE_AUTHENT_PAYLOAD_TOUT_HANDLE_OFF  0
#define HCI__WRITE_AUTHENT_PAYLOAD_TOUT_TOUT_OFF    2

#ifdef __cplusplus
}
#endif

#endif