blob: f2c7ed816a0840fc5430e153a4c46e716d782403 [file] [log] [blame]
/******************************************************************************
*
* Copyright 2008-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This file contains the implementation of the SMP interface used by
* applications that can run over an SMP.
*
******************************************************************************/
#include <base/logging.h>
#include <string.h>
#include "bt_target.h"
#include "bt_utils.h"
#include "stack_config.h"
#include "btm_int.h"
#include "hcimsgs.h"
#include "l2c_int.h"
#include "l2cdefs.h"
#include "smp_api.h"
#include "smp_int.h"
#include "btu.h"
#include "p_256_ecc_pp.h"
/*******************************************************************************
*
* Function SMP_Init
*
* Description This function initializes the SMP unit.
*
* Returns void
*
******************************************************************************/
void SMP_Init(void) {
memset(&smp_cb, 0, sizeof(tSMP_CB));
smp_cb.smp_rsp_timer_ent = alarm_new("smp.smp_rsp_timer_ent");
smp_cb.delayed_auth_timer_ent = alarm_new("smp.delayed_auth_timer_ent");
#if defined(SMP_INITIAL_TRACE_LEVEL)
smp_cb.trace_level = SMP_INITIAL_TRACE_LEVEL;
#else
smp_cb.trace_level = BT_TRACE_LEVEL_NONE; /* No traces */
#endif
SMP_TRACE_EVENT("%s", __func__);
smp_l2cap_if_init();
/* initialization of P-256 parameters */
p_256_init_curve();
/* Initialize failure case for certification */
smp_cb.cert_failure =
stack_config_get_interface()->get_pts_smp_failure_case();
if (smp_cb.cert_failure)
SMP_TRACE_ERROR("%s PTS FAILURE MODE IN EFFECT (CASE %d)", __func__,
smp_cb.cert_failure);
}
/*******************************************************************************
*
* Function SMP_SetTraceLevel
*
* Description This function sets the trace level for SMP. If called with
* a value of 0xFF, it simply returns the current trace level.
*
* Input Parameters:
* level: The level to set the GATT tracing to:
* 0xff-returns the current setting.
* 0-turns off tracing.
* >= 1-Errors.
* >= 2-Warnings.
* >= 3-APIs.
* >= 4-Events.
* >= 5-Debug.
*
* Returns The new or current trace level
*
******************************************************************************/
extern uint8_t SMP_SetTraceLevel(uint8_t new_level) {
if (new_level != 0xFF) smp_cb.trace_level = new_level;
return (smp_cb.trace_level);
}
/*******************************************************************************
*
* Function SMP_Register
*
* Description This function register for the SMP services callback.
*
* Returns void
*
******************************************************************************/
bool SMP_Register(tSMP_CALLBACK* p_cback) {
SMP_TRACE_EVENT("SMP_Register state=%d", smp_cb.state);
if (smp_cb.p_callback != NULL) {
SMP_TRACE_ERROR("SMP_Register: duplicate registration, overwrite it");
}
smp_cb.p_callback = p_cback;
return (true);
}
/*******************************************************************************
*
* Function SMP_Pair
*
* Description This function call to perform a SMP pairing with peer
* device. Device support one SMP pairing at one time.
*
* Parameters bd_addr - peer device bd address.
*
* Returns None
*
******************************************************************************/
tSMP_STATUS SMP_Pair(const RawAddress& bd_addr) {
tSMP_CB* p_cb = &smp_cb;
SMP_TRACE_EVENT("%s: state=%d br_state=%d flag=0x%x, bd_addr=%s", __func__,
p_cb->state, p_cb->br_state, p_cb->flags,
bd_addr.ToString().c_str());
if (p_cb->state != SMP_STATE_IDLE ||
p_cb->flags & SMP_PAIR_FLAGS_WE_STARTED_DD || p_cb->smp_over_br) {
/* pending security on going, reject this one */
return SMP_BUSY;
} else {
p_cb->flags = SMP_PAIR_FLAGS_WE_STARTED_DD;
p_cb->pairing_bda = bd_addr;
if (!L2CA_ConnectFixedChnl(L2CAP_SMP_CID, bd_addr)) {
tSMP_INT_DATA smp_int_data;
smp_int_data.status = SMP_PAIR_INTERNAL_ERR;
SMP_TRACE_ERROR("%s: L2C connect fixed channel failed.", __func__);
smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &smp_int_data);
return SMP_PAIR_INTERNAL_ERR;
}
return SMP_STARTED;
}
}
/*******************************************************************************
*
* Function SMP_BR_PairWith
*
* Description This function is called to start a SMP pairing over BR/EDR.
* Device support one SMP pairing at one time.
*
* Parameters bd_addr - peer device bd address.
*
* Returns SMP_STARTED if pairing started, otherwise the reason for
* failure.
*
******************************************************************************/
tSMP_STATUS SMP_BR_PairWith(const RawAddress& bd_addr) {
tSMP_CB* p_cb = &smp_cb;
SMP_TRACE_EVENT("%s: state=%d br_state=%d flag=0x%x, bd_addr=%s", __func__,
p_cb->state, p_cb->br_state, p_cb->flags,
bd_addr.ToString().c_str());
if (p_cb->state != SMP_STATE_IDLE || p_cb->smp_over_br ||
p_cb->flags & SMP_PAIR_FLAGS_WE_STARTED_DD) {
/* pending security on going, reject this one */
return SMP_BUSY;
}
p_cb->role = HCI_ROLE_MASTER;
p_cb->flags = SMP_PAIR_FLAGS_WE_STARTED_DD;
p_cb->smp_over_br = true;
p_cb->pairing_bda = bd_addr;
if (!L2CA_ConnectFixedChnl(L2CAP_SMP_BR_CID, bd_addr)) {
SMP_TRACE_ERROR("%s: L2C connect fixed channel failed.", __func__);
tSMP_INT_DATA smp_int_data;
smp_int_data.status = SMP_PAIR_INTERNAL_ERR;
smp_br_state_machine_event(p_cb, SMP_BR_AUTH_CMPL_EVT, &smp_int_data);
return SMP_PAIR_INTERNAL_ERR;
}
return SMP_STARTED;
}
/*******************************************************************************
*
* Function SMP_PairCancel
*
* Description This function call to cancel a SMP pairing with peer device.
*
* Parameters bd_addr - peer device bd address.
*
* Returns true - Pairining is cancelled
*
******************************************************************************/
bool SMP_PairCancel(const RawAddress& bd_addr) {
tSMP_CB* p_cb = &smp_cb;
uint8_t err_code = SMP_PAIR_FAIL_UNKNOWN;
// PTS SMP failure test cases
if (p_cb->cert_failure == SMP_PASSKEY_ENTRY_FAIL ||
p_cb->cert_failure == SMP_NUMERIC_COMPAR_FAIL)
err_code = p_cb->cert_failure;
BTM_TRACE_EVENT("SMP_CancelPair state=%d flag=0x%x ", p_cb->state,
p_cb->flags);
if (p_cb->state != SMP_STATE_IDLE && p_cb->pairing_bda == bd_addr) {
p_cb->is_pair_cancel = true;
SMP_TRACE_DEBUG("Cancel Pairing: set fail reason Unknown");
tSMP_INT_DATA smp_int_data;
smp_int_data.status = SMP_PAIR_FAIL_UNKNOWN;
smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &smp_int_data);
return true;
}
return false;
}
/*******************************************************************************
*
* Function SMP_SecurityGrant
*
* Description This function is called to grant security process.
*
* Parameters bd_addr - peer device bd address.
* res - result of the operation SMP_SUCCESS if success.
* Otherwise, SMP_REPEATED_ATTEMPTS if too many
* attempts.
*
* Returns None
*
******************************************************************************/
void SMP_SecurityGrant(const RawAddress& bd_addr, uint8_t res) {
SMP_TRACE_EVENT("SMP_SecurityGrant ");
// If just showing consent dialog, send response
if (smp_cb.cb_evt == SMP_CONSENT_REQ_EVT) {
// If JUSTWORKS, this is used to display the consent dialog
if (smp_cb.selected_association_model == SMP_MODEL_SEC_CONN_JUSTWORKS) {
if (res == SMP_SUCCESS) {
smp_sm_event(&smp_cb, SMP_SC_NC_OK_EVT, NULL);
} else {
SMP_TRACE_WARNING("%s() - Consent dialog fails for JUSTWORKS",
__func__);
/* send pairing failure */
tSMP_INT_DATA smp_int_data;
smp_int_data.status = SMP_NUMERIC_COMPAR_FAIL;
smp_sm_event(&smp_cb, SMP_AUTH_CMPL_EVT, &smp_int_data);
}
} else if (smp_cb.selected_association_model == SMP_MODEL_ENCRYPTION_ONLY) {
if (res == SMP_SUCCESS) {
smp_cb.sec_level = SMP_SEC_UNAUTHENTICATE;
tSMP_KEY key;
tSMP_INT_DATA smp_int_data;
key.key_type = SMP_KEY_TYPE_TK;
key.p_data = smp_cb.tk.data();
smp_int_data.key = key;
smp_cb.tk = {0};
smp_sm_event(&smp_cb, SMP_KEY_READY_EVT, &smp_int_data);
} else {
SMP_TRACE_WARNING("%s() - Consent dialog fails for ENCRYPTION_ONLY",
__func__);
/* send pairing failure */
tSMP_INT_DATA smp_int_data;
smp_int_data.status = SMP_NUMERIC_COMPAR_FAIL;
smp_sm_event(&smp_cb, SMP_AUTH_CMPL_EVT, &smp_int_data);
}
}
return;
}
if (smp_cb.smp_over_br) {
if (smp_cb.br_state != SMP_BR_STATE_WAIT_APP_RSP ||
smp_cb.cb_evt != SMP_SEC_REQUEST_EVT || smp_cb.pairing_bda != bd_addr) {
return;
}
/* clear the SMP_SEC_REQUEST_EVT event after get grant */
/* avoid generating duplicate pair request */
smp_cb.cb_evt = 0;
tSMP_INT_DATA smp_int_data;
smp_int_data.status = res;
smp_br_state_machine_event(&smp_cb, SMP_BR_API_SEC_GRANT_EVT,
&smp_int_data);
return;
}
if (smp_cb.state != SMP_STATE_WAIT_APP_RSP ||
smp_cb.cb_evt != SMP_SEC_REQUEST_EVT || smp_cb.pairing_bda != bd_addr)
return;
/* clear the SMP_SEC_REQUEST_EVT event after get grant */
/* avoid generate duplicate pair request */
smp_cb.cb_evt = 0;
tSMP_INT_DATA smp_int_data;
smp_int_data.status = res;
smp_sm_event(&smp_cb, SMP_API_SEC_GRANT_EVT, &smp_int_data);
}
/*******************************************************************************
*
* Function SMP_PasskeyReply
*
* Description This function is called after Security Manager submitted
* passkey request to the application.
*
* Parameters: bd_addr - Address of the device for which passkey was
* requested
* res - result of the operation SMP_SUCCESS if success
* passkey - numeric value in the range of
* BTM_MIN_PASSKEY_VAL(0) -
* BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
*
******************************************************************************/
void SMP_PasskeyReply(const RawAddress& bd_addr, uint8_t res,
uint32_t passkey) {
tSMP_CB* p_cb = &smp_cb;
SMP_TRACE_EVENT("SMP_PasskeyReply: Key: %d Result:%d", passkey, res);
/* If timeout already expired or has been canceled, ignore the reply */
if (p_cb->cb_evt != SMP_PASSKEY_REQ_EVT) {
SMP_TRACE_WARNING("SMP_PasskeyReply() - Wrong State: %d", p_cb->state);
return;
}
if (bd_addr != p_cb->pairing_bda) {
SMP_TRACE_ERROR("SMP_PasskeyReply() - Wrong BD Addr");
return;
}
if (btm_find_dev(bd_addr) == NULL) {
SMP_TRACE_ERROR("SMP_PasskeyReply() - no dev CB");
return;
}
if (passkey > BTM_MAX_PASSKEY_VAL || res != SMP_SUCCESS) {
SMP_TRACE_WARNING(
"SMP_PasskeyReply() - Wrong key len: %d or passkey entry fail",
passkey);
/* send pairing failure */
tSMP_INT_DATA smp_int_data;
smp_int_data.status = SMP_PASSKEY_ENTRY_FAIL;
smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &smp_int_data);
} else if (p_cb->selected_association_model ==
SMP_MODEL_SEC_CONN_PASSKEY_ENT) {
tSMP_INT_DATA smp_int_data;
smp_int_data.passkey = passkey;
smp_sm_event(&smp_cb, SMP_SC_KEY_READY_EVT, &smp_int_data);
} else {
smp_convert_string_to_tk(&p_cb->tk, passkey);
}
return;
}
/*******************************************************************************
*
* Function SMP_ConfirmReply
*
* Description This function is called after Security Manager submitted
* numeric comparison request to the application.
*
* Parameters: bd_addr - Address of the device with which numeric
* comparison was requested
* res - comparison result SMP_SUCCESS if success
*
******************************************************************************/
void SMP_ConfirmReply(const RawAddress& bd_addr, uint8_t res) {
tSMP_CB* p_cb = &smp_cb;
SMP_TRACE_EVENT("%s: Result:%d", __func__, res);
/* If timeout already expired or has been canceled, ignore the reply */
if (p_cb->cb_evt != SMP_NC_REQ_EVT) {
SMP_TRACE_WARNING("%s() - Wrong State: %d", __func__, p_cb->state);
return;
}
if (bd_addr != p_cb->pairing_bda) {
SMP_TRACE_ERROR("%s() - Wrong BD Addr", __func__);
return;
}
if (btm_find_dev(bd_addr) == NULL) {
SMP_TRACE_ERROR("%s() - no dev CB", __func__);
return;
}
if (res != SMP_SUCCESS) {
SMP_TRACE_WARNING("%s() - Numeric Comparison fails", __func__);
/* send pairing failure */
tSMP_INT_DATA smp_int_data;
smp_int_data.status = SMP_NUMERIC_COMPAR_FAIL;
smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &smp_int_data);
} else {
smp_sm_event(p_cb, SMP_SC_NC_OK_EVT, NULL);
}
}
/*******************************************************************************
*
* Function SMP_OobDataReply
*
* Description This function is called to provide the OOB data for
* SMP in response to SMP_OOB_REQ_EVT
*
* Parameters: bd_addr - Address of the peer device
* res - result of the operation SMP_SUCCESS if success
* p_data - simple pairing Randomizer C.
*
******************************************************************************/
void SMP_OobDataReply(const RawAddress& bd_addr, tSMP_STATUS res, uint8_t len,
uint8_t* p_data) {
tSMP_CB* p_cb = &smp_cb;
tSMP_KEY key;
SMP_TRACE_EVENT("%s State: %d res:%d", __func__, smp_cb.state, res);
/* If timeout already expired or has been canceled, ignore the reply */
if (p_cb->state != SMP_STATE_WAIT_APP_RSP || p_cb->cb_evt != SMP_OOB_REQ_EVT)
return;
if (res != SMP_SUCCESS || len == 0 || !p_data) {
tSMP_INT_DATA smp_int_data;
smp_int_data.status = SMP_OOB_FAIL;
smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &smp_int_data);
} else {
if (len > OCTET16_LEN) len = OCTET16_LEN;
memcpy(p_cb->tk.data(), p_data, len);
key.key_type = SMP_KEY_TYPE_TK;
key.p_data = p_cb->tk.data();
tSMP_INT_DATA smp_int_data;
smp_int_data.key = key;
smp_sm_event(&smp_cb, SMP_KEY_READY_EVT, &smp_int_data);
}
}
/*******************************************************************************
*
* Function SMP_SecureConnectionOobDataReply
*
* Description This function is called to provide the SC OOB data for
* SMP in response to SMP_SC_OOB_REQ_EVT
*
* Parameters: p_data - pointer to the data
*
******************************************************************************/
void SMP_SecureConnectionOobDataReply(uint8_t* p_data) {
tSMP_CB* p_cb = &smp_cb;
tSMP_SC_OOB_DATA* p_oob = (tSMP_SC_OOB_DATA*)p_data;
if (!p_oob) {
SMP_TRACE_ERROR("%s received no data", __func__);
tSMP_INT_DATA smp_int_data;
smp_int_data.status = SMP_OOB_FAIL;
smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &smp_int_data);
return;
}
SMP_TRACE_EVENT(
"%s req_oob_type: %d, loc_oob_data.present: %d, "
"peer_oob_data.present: %d",
__func__, p_cb->req_oob_type, p_oob->loc_oob_data.present,
p_oob->peer_oob_data.present);
if (p_cb->state != SMP_STATE_WAIT_APP_RSP ||
p_cb->cb_evt != SMP_SC_OOB_REQ_EVT)
return;
bool data_missing = false;
switch (p_cb->req_oob_type) {
case SMP_OOB_PEER:
if (!p_oob->peer_oob_data.present) data_missing = true;
break;
case SMP_OOB_LOCAL:
if (!p_oob->loc_oob_data.present) data_missing = true;
break;
case SMP_OOB_BOTH:
if (!p_oob->loc_oob_data.present || !p_oob->peer_oob_data.present)
data_missing = true;
break;
default:
SMP_TRACE_EVENT("Unexpected OOB data type requested. Fail OOB");
data_missing = true;
break;
}
tSMP_INT_DATA smp_int_data;
if (data_missing) {
smp_int_data.status = SMP_OOB_FAIL;
smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &smp_int_data);
return;
}
p_cb->sc_oob_data = *p_oob;
smp_int_data.p_data = p_data;
smp_sm_event(&smp_cb, SMP_SC_OOB_DATA_EVT, &smp_int_data);
}
/*******************************************************************************
*
* Function SMP_KeypressNotification
*
* Description This function is called to notify Security Manager about
* Keypress Notification.
*
* Parameters: bd_addr Address of the device to send keypress
* notification to
* value Keypress notification parameter value
*
******************************************************************************/
void SMP_KeypressNotification(const RawAddress& bd_addr, uint8_t value) {
tSMP_CB* p_cb = &smp_cb;
SMP_TRACE_EVENT("%s: Value: %d", __func__, value);
if (bd_addr != p_cb->pairing_bda) {
SMP_TRACE_ERROR("%s() - Wrong BD Addr", __func__);
return;
}
if (btm_find_dev(bd_addr) == NULL) {
SMP_TRACE_ERROR("%s() - no dev CB", __func__);
return;
}
/* Keypress Notification is used by a device with KeyboardOnly IO capabilities
* during the passkey entry protocol */
if (p_cb->local_io_capability != SMP_IO_CAP_IN) {
SMP_TRACE_ERROR("%s() - wrong local IO capabilities %d", __func__,
p_cb->local_io_capability);
return;
}
if (p_cb->selected_association_model != SMP_MODEL_SEC_CONN_PASSKEY_ENT) {
SMP_TRACE_ERROR("%s() - wrong protocol %d", __func__,
p_cb->selected_association_model);
return;
}
tSMP_INT_DATA smp_int_data;
smp_int_data.status = value;
smp_sm_event(p_cb, SMP_KEYPRESS_NOTIFICATION_EVENT, &smp_int_data);
}
/*******************************************************************************
*
* Function SMP_CreateLocalSecureConnectionsOobData
*
* Description This function is called to start creation of local SC OOB
* data set (tSMP_LOC_OOB_DATA).
*
* Parameters: bd_addr - Address of the device to send OOB data block to
*
* Returns Boolean - true: creation of local SC OOB data set started.
******************************************************************************/
bool SMP_CreateLocalSecureConnectionsOobData(tBLE_BD_ADDR* addr_to_send_to) {
tSMP_CB* p_cb = &smp_cb;
if (addr_to_send_to == NULL) {
SMP_TRACE_ERROR("%s addr_to_send_to is not provided", __func__);
return false;
}
VLOG(2) << __func__ << " addr type:" << +addr_to_send_to->type
<< ", BDA:" << addr_to_send_to->bda << ", state:" << p_cb->state
<< ", br_state: " << p_cb->br_state;
if ((p_cb->state != SMP_STATE_IDLE) || (p_cb->smp_over_br)) {
SMP_TRACE_WARNING(
"%s creation of local OOB data set "
"starts only in IDLE state",
__func__);
return false;
}
p_cb->sc_oob_data.loc_oob_data.addr_sent_to = *addr_to_send_to;
smp_sm_event(p_cb, SMP_CR_LOC_SC_OOB_DATA_EVT, NULL);
return true;
}