/******************************************************************************
 *
 *  Copyright (C) 1999-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/*****************************************************************************
 *
 *  This file contains definitions internal to the PORT unit
 *
 *****************************************************************************/

#ifndef PORT_INT_H
#define PORT_INT_H

#include "bt_common.h"
#include "bt_target.h"
#include "osi/include/alarm.h"
#include "osi/include/fixed_queue.h"
#include "port_api.h"
#include "rfcdefs.h"

/* Local events passed when application event is sent from the api to PORT */
/* ???*/
#define PORT_EVENT_OPEN (1 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_CONTROL (2 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_SET_STATE (3 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_SET_CALLBACK (5 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_WRITE (6 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_PURGE (7 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_SEND_ERROR (8 | BT_EVT_TO_BTU_SP_EVT)
#define PORT_EVENT_FLOW_CONTROL (9 | BT_EVT_TO_BTU_SP_EVT)

/*
 * Flow control configuration values for the mux
*/
#define PORT_FC_UNDEFINED 0 /* mux flow control mechanism not defined yet */
#define PORT_FC_TS710 1     /* use TS 07.10 flow control  */
#define PORT_FC_CREDIT 2    /* use RFCOMM credit based flow control */

/*
 * Define Port Data Transfere control block
*/
typedef struct {
  fixed_queue_t* queue; /* Queue of buffers waiting to be sent */
  bool peer_fc; /* true if flow control is set based on peer's request */
  bool user_fc; /* true if flow control is set based on user's request  */
  uint32_t queue_size;        /* Number of data bytes in the queue */
  tPORT_CALLBACK* p_callback; /* Address of the callback function */
} tPORT_DATA;

/*
 * Port control structure used to pass modem info
*/
typedef struct {
#define MODEM_SIGNAL_DTRDSR 0x01
#define MODEM_SIGNAL_RTSCTS 0x02
#define MODEM_SIGNAL_RI 0x04
#define MODEM_SIGNAL_DCD 0x08

  uint8_t modem_signal; /* [DTR/DSR | RTS/CTS | RI | DCD ] */

  uint8_t break_signal; /* 0-3 s in steps of 200 ms */

  uint8_t discard_buffers; /* 0 - do not discard, 1 - discard */

#define RFCOMM_CTRL_BREAK_ASAP 0
#define RFCOMM_CTRL_BREAK_IN_SEQ 1

  uint8_t break_signal_seq; /* as soon as possible | in sequence (default) */

  bool fc; /* true when the device is unable to accept frames */
} tPORT_CTRL;

/*
 * RFCOMM multiplexer Control Block
*/
typedef struct {
  alarm_t* mcb_timer;   /* MCB timer */
  fixed_queue_t* cmd_q; /* Queue for command messages on this mux */
  uint8_t port_inx[RFCOMM_MAX_DLCI + 1]; /* Array for quick access to  */
                                         /* tPORT based on dlci        */
  RawAddress bd_addr;                    /* BD ADDR of the peer if initiator */
  uint16_t lcid;                         /* Local cid used for this channel */
  uint16_t peer_l2cap_mtu; /* Max frame that can be sent to peer L2CAP */
  uint8_t state;           /* Current multiplexer channel state */
  uint8_t is_initiator;    /* true if this side sends SABME (dlci=0) */
  bool local_cfg_sent;
  bool peer_cfg_rcvd;
  bool restart_required;  /* true if has to restart channel after disc */
  bool peer_ready;        /* True if other side can accept frames */
  uint8_t flow;           /* flow control mechanism for this mux */
  bool l2cap_congested;   /* true if L2CAP is congested */
  bool is_disc_initiator; /* true if initiated disc of port */
  uint16_t
      pending_lcid; /* store LCID for incoming connection while connecting */
  uint8_t
      pending_id; /* store l2cap ID for incoming connection while connecting */
} tRFC_MCB;

/*
 * RFCOMM Port Connection Control Block
*/
typedef struct {
#define RFC_PORT_STATE_IDLE 0
#define RFC_PORT_STATE_WAIT_START 1
#define RFC_PORT_STATE_OPENING 2
#define RFC_PORT_STATE_OPENED 3
#define RFC_PORT_STATE_CLOSING 4

  uint8_t state; /* Current state of the connection */

#define RFC_RSP_PN 0x01
#define RFC_RSP_RPN_REPLY 0x02
#define RFC_RSP_RPN 0x04
#define RFC_RSP_MSC 0x08
#define RFC_RSP_RLS 0x10

  uint8_t expected_rsp;

  tRFC_MCB* p_mcb;

  alarm_t* port_timer;
} tRFC_PORT;

/*
 * Define control block containing information about PORT connection
*/
typedef struct {
  uint8_t inx; /* Index of this control block in the port_info array */
  bool in_use; /* True when structure is allocated */

#define PORT_STATE_CLOSED 0
#define PORT_STATE_OPENING 1
#define PORT_STATE_OPENED 2
#define PORT_STATE_CLOSING 3

  uint8_t state; /* State of the application */

  uint8_t scn;   /* Service channel number */
  uint16_t uuid; /* Service UUID */

  RawAddress bd_addr; /* BD ADDR of the device for the multiplexer channel */
  bool is_server;  /* true if the server application */
  uint8_t dlci;    /* DLCI of the connection */

  uint8_t error; /* Last error detected */

  uint8_t line_status; /* Line status as reported by peer */

  uint8_t default_signal_state; /* Initial signal state depending on uuid */

  uint16_t mtu;      /* Max MTU that port can receive */
  uint16_t peer_mtu; /* Max MTU that port can send */

  tPORT_DATA tx; /* Control block for data from app to peer */
  tPORT_DATA rx; /* Control block for data from peer to app */

  tPORT_STATE user_port_pars; /* Port parameters for user connection */
  tPORT_STATE peer_port_pars; /* Port parameters for user connection */

  tPORT_CTRL local_ctrl;
  tPORT_CTRL peer_ctrl;

#define PORT_CTRL_REQ_SENT 0x01
#define PORT_CTRL_REQ_CONFIRMED 0x02
#define PORT_CTRL_IND_RECEIVED 0x04
#define PORT_CTRL_IND_RESPONDED 0x08

  uint8_t port_ctrl; /* Modem Status Command  */

  bool rx_flag_ev_pending; /* RXFLAG Character is received */

  tRFC_PORT rfc; /* RFCOMM port control block */

  uint32_t ev_mask;           /* Event mask for the callback */
  tPORT_CALLBACK* p_callback; /* Pointer to users callback function */
  tPORT_CALLBACK*
      p_mgmt_callback; /* Callback function to receive connection up/down */
  tPORT_DATA_CALLBACK*
      p_data_callback; /* Callback function to receive data indications */
  tPORT_DATA_CO_CALLBACK*
      p_data_co_callback; /* Callback function with callouts and flowctrl */
  uint16_t credit_tx;     /* Flow control credits for tx path */
  uint16_t credit_rx;     /* Flow control credits for rx path, this is */
                          /* number of buffers peer is allowed to sent */
  uint16_t
      credit_rx_max; /* Max number of credits we will allow this guy to sent */
  uint16_t credit_rx_low;   /* Number of credits when we send credit update */
  uint16_t rx_buf_critical; /* port receive queue critical watermark level */
  bool keep_port_handle;    /* true if port is not deallocated when closing */
  /* it is set to true for server when allocating port */
  uint16_t keep_mtu; /* Max MTU that port can receive by server */
} tPORT;

/* Define the PORT/RFCOMM control structure
*/
typedef struct {
  tPORT port[MAX_RFC_PORTS];            /* Port info pool */
  tRFC_MCB rfc_mcb[MAX_BD_CONNECTIONS]; /* RFCOMM bd_connections pool */
} tPORT_CB;

/*
 * Functions provided by the port_utils.cc
*/
extern tPORT* port_allocate_port(uint8_t dlci, const RawAddress& bd_addr);
extern void port_set_defaults(tPORT* p_port);
extern void port_select_mtu(tPORT* p_port);
extern void port_release_port(tPORT* p_port);
extern tPORT* port_find_mcb_dlci_port(tRFC_MCB* p_mcb, uint8_t dlci);
extern tRFC_MCB* port_find_mcb(const RawAddress& bd_addr);
extern tPORT* port_find_dlci_port(uint8_t dlci);
extern tPORT* port_find_port(uint8_t dlci, const RawAddress& bd_addr);
extern uint32_t port_get_signal_changes(tPORT* p_port, uint8_t old_signals,
                                        uint8_t signal);
extern uint32_t port_flow_control_user(tPORT* p_port);
extern void port_flow_control_peer(tPORT* p_port, bool enable, uint16_t count);

/*
 * Functions provided by the port_rfc.cc
*/
extern int port_open_continue(tPORT* p_port);
extern void port_start_port_open(tPORT* p_port);
extern void port_start_par_neg(tPORT* p_port);
extern void port_start_control(tPORT* p_port);
extern void port_start_close(tPORT* p_port);
extern void port_rfc_closed(tPORT* p_port, uint8_t res);

#endif