/******************************************************************************
 *
 *  Copyright (C) 2009-2013 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

#ifndef GAP_API_H
#define GAP_API_H

#include "btm_api.h"
#include "l2c_api.h"
#include "profiles_api.h"

/*****************************************************************************
 *  Constants
 ****************************************************************************/
/*** GAP Error and Status Codes ***/
/* Unsupported call */
#define GAP_UNSUPPORTED (GAP_ERR_GRP + 0x01)
/* End of inquiry database marker */
#define GAP_EOINQDB (GAP_ERR_GRP + 0x02)
/* The requested function was busy */
#define GAP_ERR_BUSY (GAP_ERR_GRP + 0x03)
/* No control blocks available */
#define GAP_ERR_NO_CTRL_BLK (GAP_ERR_GRP + 0x04)
/* Error occurred while initiating the command */
#define GAP_ERR_STARTING_CMD (GAP_ERR_GRP + 0x05)
/* No Inquiry DB record for BD_ADDR */
#define GAP_NO_BDADDR_REC (GAP_ERR_GRP + 0x06)
/* An illegal mode parameter was detected */
#define GAP_ERR_ILL_MODE (GAP_ERR_GRP + 0x07)
/* An illegal time parameter was detected */
#define GAP_ERR_ILL_INQ_TIME (GAP_ERR_GRP + 0x08)
/* An illegal parameter was detected */
#define GAP_ERR_ILL_PARM (GAP_ERR_GRP + 0x09)
/* Error starting the remote device name request */
#define GAP_ERR_REM_NAME (GAP_ERR_GRP + 0x0a)
/* The GAP command was started (result pending) */
#define GAP_CMD_INITIATED (GAP_ERR_GRP + 0x0b)
/* The device was not up; the request was not executed */
#define GAP_DEVICE_NOT_UP (GAP_ERR_GRP + 0x0c)
/* The bd addr passed in was not found or invalid */
#define GAP_BAD_BD_ADDR (GAP_ERR_GRP + 0x0d)

/* Bad GAP handle */
#define GAP_ERR_BAD_HANDLE (GAP_ERR_GRP + 0x0e)
/* Buffer offset invalid */
#define GAP_ERR_BUF_OFFSET (GAP_ERR_GRP + 0x0f)
/* Connection is in invalid state */
#define GAP_ERR_BAD_STATE (GAP_ERR_GRP + 0x10)
/* No data available */
#define GAP_NO_DATA_AVAIL (GAP_ERR_GRP + 0x11)
/* BT stack is congested */
#define GAP_ERR_CONGESTED (GAP_ERR_GRP + 0x12)
/* Security failed */
#define GAP_ERR_SECURITY (GAP_ERR_GRP + 0x13)

/* General error processing BTM request */
#define GAP_ERR_PROCESSING (GAP_ERR_GRP + 0x14)
/* Timeout occurred while processing cmd */
#define GAP_ERR_TIMEOUT (GAP_ERR_GRP + 0x15)
#define GAP_EVT_CONN_OPENED 0x0100
#define GAP_EVT_CONN_CLOSED 0x0101
#define GAP_EVT_CONN_DATA_AVAIL 0x0102
#define GAP_EVT_CONN_CONGESTED 0x0103
#define GAP_EVT_CONN_UNCONGESTED 0x0104
#define GAP_EVT_TX_EMPTY 0x0105

/* Values for 'chan_mode_mask' field */
/* GAP_ConnOpen() - optional channels to negotiate */
#define GAP_FCR_CHAN_OPT_BASIC L2CAP_FCR_CHAN_OPT_BASIC
#define GAP_FCR_CHAN_OPT_ERTM L2CAP_FCR_CHAN_OPT_ERTM
#define GAP_FCR_CHAN_OPT_STREAM L2CAP_FCR_CHAN_OPT_STREAM
/*** used in connection variables and functions ***/
#define GAP_INVALID_HANDLE 0xFFFF

/* This is used to change the criteria for AMP */
#define GAP_PROTOCOL_ID (UUID_PROTOCOL_UDP)

#ifndef GAP_PREFER_CONN_INT_MAX
#define GAP_PREFER_CONN_INT_MAX BTM_BLE_CONN_INT_MIN
#endif

#ifndef GAP_PREFER_CONN_INT_MIN
#define GAP_PREFER_CONN_INT_MIN BTM_BLE_CONN_INT_MIN
#endif

#ifndef GAP_PREFER_CONN_LATENCY
#define GAP_PREFER_CONN_LATENCY 0
#endif

#ifndef GAP_PREFER_CONN_SP_TOUT
#define GAP_PREFER_CONN_SP_TOUT 2000
#endif

/*****************************************************************************
 *  Type Definitions
 ****************************************************************************/
/*
 * Callback function for connection services
*/
typedef void(tGAP_CONN_CALLBACK)(uint16_t gap_handle, uint16_t event);

/*
 * Define the callback function prototypes.  Parameters are specific
 * to each event and are described below
*/
typedef void(tGAP_CALLBACK)(uint16_t event, void* p_data);

/* Definition of the GAP_FindAddrByName results structure */
typedef struct {
  uint16_t status;
  RawAddress bd_addr;
  tBTM_BD_NAME devname;
} tGAP_FINDADDR_RESULTS;

typedef struct {
  uint16_t int_min;
  uint16_t int_max;
  uint16_t latency;
  uint16_t sp_tout;
} tGAP_BLE_PREF_PARAM;

typedef union {
  tGAP_BLE_PREF_PARAM conn_param;
  RawAddress reconn_bda;
  uint16_t icon;
  uint8_t* p_dev_name;
  uint8_t addr_resolution;

} tGAP_BLE_ATTR_VALUE;

typedef void(tGAP_BLE_CMPL_CBACK)(bool status, const RawAddress& addr,
                                  uint16_t length, char* p_name);

/*****************************************************************************
 *  External Function Declarations
 ****************************************************************************/

/*** Functions for L2CAP connection interface ***/

/*******************************************************************************
 *
 * Function         GAP_ConnOpen
 *
 * Description      This function is called to open a generic L2CAP connection.
 *
 * Returns          handle of the connection if successful, else
 *                  GAP_INVALID_HANDLE
 *
 ******************************************************************************/
extern uint16_t GAP_ConnOpen(const char* p_serv_name, uint8_t service_id,
                             bool is_server, const RawAddress* p_rem_bda,
                             uint16_t psm, tL2CAP_CFG_INFO* p_cfg,
                             tL2CAP_ERTM_INFO* ertm_info, uint16_t security,
                             uint8_t chan_mode_mask, tGAP_CONN_CALLBACK* p_cb,
                             tBT_TRANSPORT transport);

/*******************************************************************************
 *
 * Function         GAP_ConnClose
 *
 * Description      This function is called to close a connection.
 *
 * Returns          BT_PASS             - closed OK
 *                  GAP_ERR_BAD_HANDLE  - invalid handle
 *
 ******************************************************************************/
extern uint16_t GAP_ConnClose(uint16_t gap_handle);

/*******************************************************************************
 *
 * Function         GAP_ConnReadData
 *
 * Description      GKI buffer unaware application will call this function
 *                  after receiving GAP_EVT_RXDATA event. A data copy is made
 *                  into the receive buffer parameter.
 *
 * Returns          BT_PASS             - data read
 *                  GAP_ERR_BAD_HANDLE  - invalid handle
 *                  GAP_NO_DATA_AVAIL   - no data available
 *
 ******************************************************************************/
extern uint16_t GAP_ConnReadData(uint16_t gap_handle, uint8_t* p_data,
                                 uint16_t max_len, uint16_t* p_len);

/*******************************************************************************
 *
 * Function         GAP_GetRxQueueCnt
 *
 * Description      This function return number of bytes on the rx queue.
 *
 * Parameters:      handle     - Handle returned in the GAP_ConnOpen
 *                  p_rx_queue_count - Pointer to return queue count in.
 *
 *
 ******************************************************************************/
extern int GAP_GetRxQueueCnt(uint16_t handle, uint32_t* p_rx_queue_count);

/*******************************************************************************
 *
 * Function         GAP_ConnBTRead
 *
 * Description      GKI buffer aware applications will call this function after
 *                  receiving an GAP_EVT_RXDATA event to process the incoming
 *                  data buffer.
 *
 * Returns          BT_PASS             - data read
 *                  GAP_ERR_BAD_HANDLE  - invalid handle
 *                  GAP_NO_DATA_AVAIL   - no data available
 *
 ******************************************************************************/
extern uint16_t GAP_ConnBTRead(uint16_t gap_handle, BT_HDR** pp_buf);

/*******************************************************************************
 *
 * Function         GAP_ConnWriteData
 *
 * Description      GKI buffer unaware application will call this function
 *                  to send data to the connection. A data copy is made into a
 *                  GKI buffer.
 *
 * Returns          BT_PASS                 - data read
 *                  GAP_ERR_BAD_HANDLE      - invalid handle
 *                  GAP_ERR_BAD_STATE       - connection not established
 *                  GAP_CONGESTION          - system is congested
 *
 ******************************************************************************/
extern uint16_t GAP_ConnWriteData(uint16_t gap_handle, uint8_t* p_data,
                                  uint16_t max_len, uint16_t* p_len);

/*******************************************************************************
 *
 * Function         GAP_ConnReconfig
 *
 * Description      Applications can call this function to reconfigure the
 *                  connection.
 *
 * Returns          BT_PASS                 - config process started
 *                  GAP_ERR_BAD_HANDLE      - invalid handle
 *
 ******************************************************************************/
extern uint16_t GAP_ConnReconfig(uint16_t gap_handle, tL2CAP_CFG_INFO* p_cfg);

/*******************************************************************************
 *
 * Function         GAP_ConnSetIdleTimeout
 *
 * Description      Higher layers call this function to set the idle timeout for
 *                  a connection, or for all future connections. The "idle
 *                  timeout" is the amount of time that a connection can remain
 *                  up with no L2CAP channels on it. A timeout of zero means
 *                  that the connection will be torn down immediately when the
 *                  last channel is removed. A timeout of 0xFFFF means no
 *                  timeout. Values are in seconds.
 *
 * Returns          BT_PASS                 - config process started
 *                  GAP_ERR_BAD_HANDLE      - invalid handle
 *
 ******************************************************************************/
extern uint16_t GAP_ConnSetIdleTimeout(uint16_t gap_handle, uint16_t timeout);

/*******************************************************************************
 *
 * Function         GAP_ConnGetRemoteAddr
 *
 * Description      This function is called to get the remote BD address
 *                  of a connection.
 *
 * Returns          BT_PASS             - closed OK
 *                  GAP_ERR_BAD_HANDLE  - invalid handle
 *
 ******************************************************************************/
extern const RawAddress* GAP_ConnGetRemoteAddr(uint16_t gap_handle);

/*******************************************************************************
 *
 * Function         GAP_ConnGetRemMtuSize
 *
 * Description      Returns the remote device's MTU size.
 *
 * Returns          uint16_t - maximum size buffer that can be transmitted to
 *                             the peer
 *
 ******************************************************************************/
extern uint16_t GAP_ConnGetRemMtuSize(uint16_t gap_handle);

/*******************************************************************************
 *
 * Function         GAP_ConnGetL2CAPCid
 *
 * Description      Returns the L2CAP channel id
 *
 * Parameters:      handle      - Handle of the connection
 *
 * Returns          uint16_t    - The L2CAP channel id
 *                  0, if error
 *
 ******************************************************************************/
extern uint16_t GAP_ConnGetL2CAPCid(uint16_t gap_handle);

/*******************************************************************************
 *
 * Function         GAP_Init
 *
 * Description      Initializes the control blocks used by GAP.
 *                  This routine should not be called except once per
 *                      stack invocation.
 *
 * Returns          Nothing
 *
 ******************************************************************************/
extern void GAP_Init(void);

/*******************************************************************************
 *
 * Function         GAP_BleAttrDBUpdate
 *
 * Description      update GAP local BLE attribute database.
 *
 * Returns          Nothing
 *
 ******************************************************************************/
extern void GAP_BleAttrDBUpdate(uint16_t attr_uuid,
                                tGAP_BLE_ATTR_VALUE* p_value);

/*******************************************************************************
 *
 * Function         GAP_BleReadPeerPrefConnParams
 *
 * Description      Start a process to read a connected peripheral's preferred
 *                  connection parameters
 *
 * Returns          true if read started, else false if GAP is busy
 *
 ******************************************************************************/
extern bool GAP_BleReadPeerPrefConnParams(const RawAddress& peer_bda);

/*******************************************************************************
 *
 * Function         GAP_BleReadPeerDevName
 *
 * Description      Start a process to read a connected peripheral's device
 *                  name.
 *
 * Returns          true if request accepted
 *
 ******************************************************************************/
extern bool GAP_BleReadPeerDevName(const RawAddress& peer_bda,
                                   tGAP_BLE_CMPL_CBACK* p_cback);

/*******************************************************************************
 *
 * Function         GAP_BleReadPeerAddressResolutionCap
 *
 * Description      Start a process to read peer address resolution capability
 *
 * Returns          true if request accepted
 *
 ******************************************************************************/
extern bool GAP_BleReadPeerAddressResolutionCap(const RawAddress& peer_bda,
                                                tGAP_BLE_CMPL_CBACK* p_cback);

/*******************************************************************************
 *
 * Function         GAP_BleCancelReadPeerDevName
 *
 * Description      Cancel reading a peripheral's device name.
 *
 * Returns          true if request accepted
 *
 ******************************************************************************/
extern bool GAP_BleCancelReadPeerDevName(const RawAddress& peer_bda);

#endif /* GAP_API_H */