include/gki_target.h - platform/system/bt - Git at Google

 /******************************************************************************
  *
  *  Copyright (C) 1999-2012 Broadcom Corporation
  *
  *  Licensed under the Apache License, Version 2.0 (the "License");
  *  you may not use this file except in compliance with the License.
  *  You may obtain a copy of the License at:
  *
  *  http://www.apache.org/licenses/LICENSE-2.0
  *
  *  Unless required by applicable law or agreed to in writing, software
  *  distributed under the License is distributed on an "AS IS" BASIS,
  *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  *  See the License for the specific language governing permissions and
  *  limitations under the License.
  *
  ******************************************************************************/

 #pragma once

 /******************************************************************************
 **
 ** Buffer configuration
 **
 ******************************************************************************/

 /* The size of the buffers in pool 0. */
 #ifndef GKI_BUF0_SIZE
 #define GKI_BUF0_SIZE               64
 #endif

 /* The number of buffers in buffer pool 0. */
 #ifndef GKI_BUF0_MAX
 #define GKI_BUF0_MAX                96
 #endif

 /* The ID of buffer pool 0. */
 #ifndef GKI_POOL_ID_0
 #define GKI_POOL_ID_0               0
 #endif

 /* The size of the buffers in pool 1. */
 #ifndef GKI_BUF1_SIZE
 #define GKI_BUF1_SIZE               288
 #endif

 /* The number of buffers in buffer pool 1. */
 #ifndef GKI_BUF1_MAX
 #define GKI_BUF1_MAX                52
 #endif

 /* The ID of buffer pool 1. */
 #ifndef GKI_POOL_ID_1
 #define GKI_POOL_ID_1               1
 #endif

 /* The size of the buffers in pool 2. */
 #ifndef GKI_BUF2_SIZE
 #define GKI_BUF2_SIZE               660
 #endif

 /* The number of buffers in buffer pool 2. */
 #ifndef GKI_BUF2_MAX
 #define GKI_BUF2_MAX                90
 #endif

 /* The ID of buffer pool 2. */
 #ifndef GKI_POOL_ID_2
 #define GKI_POOL_ID_2               2
 #endif

 /* The size of the buffers in pool 3. */
 #ifndef GKI_BUF3_SIZE
 #define GKI_BUF3_SIZE               (4096+16)
 #endif

 /* The number of buffers in buffer pool 3. */
 #ifndef GKI_BUF3_MAX
 #define GKI_BUF3_MAX                400
 #endif

 /* The ID of buffer pool 3. */
 #ifndef GKI_POOL_ID_3
 #define GKI_POOL_ID_3               3
 #endif

 /* The size of the largest PUBLIC fixed buffer in system. */
 #ifndef GKI_MAX_BUF_SIZE
 #define GKI_MAX_BUF_SIZE            GKI_BUF3_SIZE
 #endif

 /* The pool ID of the largest PUBLIC fixed buffer in system. */
 #ifndef GKI_MAX_BUF_SIZE_POOL_ID
 #define GKI_MAX_BUF_SIZE_POOL_ID    GKI_POOL_ID_3
 #endif

 /* Pool 4 is used for BluetoothSocket L2CAP connections */
 /* The size of the buffers in pool 4. */
 #ifndef GKI_BUF4_SIZE
 #define GKI_BUF4_SIZE               (8080+26)
 #endif

 /* The number of buffers in buffer pool 4. */
 #ifndef GKI_BUF4_MAX
 #define GKI_BUF4_MAX                (OBX_NUM_SERVERS + OBX_NUM_CLIENTS)
 #endif

 /* The ID of buffer pool 4. */
 #ifndef GKI_POOL_ID_4
 #define GKI_POOL_ID_4               4
 #endif

 /* The number of fixed GKI buffer pools.
 eL2CAP requires Pool ID 5
 If BTM_SCO_HCI_INCLUDED is FALSE, Pool ID 6 is unnecessary, otherwise set to 7
 If BTA_HL_INCLUDED is FALSE then Pool ID 7 is uncessary and set the following to 7, otherwise set to 8
 If BLE_INCLUDED is FALSE then Pool ID 8 is uncessary and set the following to 8, otherwise set to 9
 POOL_ID 9 is a public pool meant for large buffer needs such as SDP_DB
 */
 #ifndef GKI_NUM_FIXED_BUF_POOLS
 #define GKI_NUM_FIXED_BUF_POOLS     10
 #endif

 /* The buffer pool usage mask. */
 #ifndef GKI_DEF_BUFPOOL_PERM_MASK
 /* Setting POOL_ID 9 as a public pool meant for large buffers such as SDP_DB */
 #define GKI_DEF_BUFPOOL_PERM_MASK   0xfdf0
 #endif

 /* The following is intended to be a reserved pool for L2CAP
 Flow control and retransmissions and intentionally kept out
 of order */

 /* The number of buffers in buffer pool 5. */
 #ifndef GKI_BUF5_MAX
 #define GKI_BUF5_MAX                64
 #endif

 /* The ID of buffer pool 5. */
 #ifndef GKI_POOL_ID_5
 #define GKI_POOL_ID_5               5
 #endif

 /* The size of the buffers in pool 5
 ** Special pool used by L2CAP retransmissions only.  This size based on segment
 ** that will fit into both DH5 and 2-DH3 packet types after accounting for GKI
 ** header.  13 bytes of max headers allows us a 339 payload max. (in btui_app.txt)
 ** Note: 748 used for insight scriptwrapper with CAT-2 scripts.
 */
 #ifndef GKI_BUF5_SIZE
 #define GKI_BUF5_SIZE               748
 #endif

 /* The following is intended to be a reserved pool for SCO
 over HCI data and intentionally kept out of order */

 /* The ID of buffer pool 6. */
 #ifndef GKI_POOL_ID_6
 #define GKI_POOL_ID_6               6
 #endif

 /* The size of the buffers in pool 6,
   BUF_SIZE = max SCO data 255 + sizeof(BT_HDR) = 8 + SCO packet header 3 + padding 2 = 268 */
 #ifndef GKI_BUF6_SIZE
 #define GKI_BUF6_SIZE               268
 #endif

 /* The number of buffers in buffer pool 6. */
 #ifndef GKI_BUF6_MAX
 #define GKI_BUF6_MAX                60
 #endif


 /* The following pool is a dedicated pool for HDP
    If a shared pool is more desirable then
    1. set BTA_HL_LRG_DATA_POOL_ID to the desired Gki Pool ID
    2. make sure that the shared pool size is larger than 9472
    3. adjust GKI_NUM_FIXED_BUF_POOLS accordingly since
       POOL ID 7 is not needed
 */

 /* The ID of buffer pool 7. */
 #ifndef GKI_POOL_ID_7
 #define GKI_POOL_ID_7               7
 #endif

 /* The size of the buffers in pool 7 */
 #ifndef GKI_BUF7_SIZE
 #define GKI_BUF7_SIZE               (10240 + 24)
 #endif

 /* The number of buffers in buffer pool 7. */
 #ifndef GKI_BUF7_MAX
 #define GKI_BUF7_MAX                2
 #endif

 /* The following pool is a dedicated pool for GATT
    If a shared pool is more desirable then
    1. set GATT_DB_POOL_ID to the desired Gki Pool ID
    2. make sure that the shared pool size fit a common GATT database needs
    3. adjust GKI_NUM_FIXED_BUF_POOLS accordingly since
       POOL ID 8 is not needed
 */

 /* The ID of buffer pool 8. */
 #ifndef GKI_POOL_ID_8
 #define GKI_POOL_ID_8               8
 #endif

 /* The size of the buffers in pool 8 */
 #ifndef GKI_BUF8_SIZE
 #define GKI_BUF8_SIZE               128
 #endif

 /* The number of buffers in buffer pool 8. */
 #ifndef GKI_BUF8_MAX
 #define GKI_BUF8_MAX                30
 #endif

 /* The following pool is  meant for large allocations such as SDP_DB */
 #ifndef GKI_POOL_ID_9
 #define GKI_POOL_ID_9              9
 #endif

 #ifndef GKI_BUF9_SIZE
 #define GKI_BUF9_SIZE            8192
 #endif

 #ifndef GKI_BUF9_MAX
 #define GKI_BUF9_MAX           5
 #endif

 /* The number of fixed and dynamic buffer pools */
 #ifndef GKI_NUM_TOTAL_BUF_POOLS
 #define GKI_NUM_TOTAL_BUF_POOLS     10
 #endif

 void LogMsg (UINT32 trace_set_mask, const char *fmt_str, ...);
	/******************************************************************************
	*
	* Copyright (C) 1999-2012 Broadcom Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at:
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*
	******************************************************************************/

	#pragma once

	/******************************************************************************
	**
	** Buffer configuration
	**
	******************************************************************************/

	/* The size of the buffers in pool 0. */
	#ifndef GKI_BUF0_SIZE
	#define GKI_BUF0_SIZE 64
	#endif

	/* The number of buffers in buffer pool 0. */
	#ifndef GKI_BUF0_MAX
	#define GKI_BUF0_MAX 96
	#endif

	/* The ID of buffer pool 0. */
	#ifndef GKI_POOL_ID_0
	#define GKI_POOL_ID_0 0
	#endif

	/* The size of the buffers in pool 1. */
	#ifndef GKI_BUF1_SIZE
	#define GKI_BUF1_SIZE 288
	#endif

	/* The number of buffers in buffer pool 1. */
	#ifndef GKI_BUF1_MAX
	#define GKI_BUF1_MAX 52
	#endif

	/* The ID of buffer pool 1. */
	#ifndef GKI_POOL_ID_1
	#define GKI_POOL_ID_1 1
	#endif

	/* The size of the buffers in pool 2. */
	#ifndef GKI_BUF2_SIZE
	#define GKI_BUF2_SIZE 660
	#endif

	/* The number of buffers in buffer pool 2. */
	#ifndef GKI_BUF2_MAX
	#define GKI_BUF2_MAX 90
	#endif

	/* The ID of buffer pool 2. */
	#ifndef GKI_POOL_ID_2
	#define GKI_POOL_ID_2 2
	#endif

	/* The size of the buffers in pool 3. */
	#ifndef GKI_BUF3_SIZE
	#define GKI_BUF3_SIZE (4096+16)
	#endif

	/* The number of buffers in buffer pool 3. */
	#ifndef GKI_BUF3_MAX
	#define GKI_BUF3_MAX 400
	#endif

	/* The ID of buffer pool 3. */
	#ifndef GKI_POOL_ID_3
	#define GKI_POOL_ID_3 3
	#endif

	/* The size of the largest PUBLIC fixed buffer in system. */
	#ifndef GKI_MAX_BUF_SIZE
	#define GKI_MAX_BUF_SIZE GKI_BUF3_SIZE
	#endif

	/* The pool ID of the largest PUBLIC fixed buffer in system. */
	#ifndef GKI_MAX_BUF_SIZE_POOL_ID
	#define GKI_MAX_BUF_SIZE_POOL_ID GKI_POOL_ID_3
	#endif

	/* Pool 4 is used for BluetoothSocket L2CAP connections */
	/* The size of the buffers in pool 4. */
	#ifndef GKI_BUF4_SIZE
	#define GKI_BUF4_SIZE (8080+26)
	#endif

	/* The number of buffers in buffer pool 4. */
	#ifndef GKI_BUF4_MAX
	#define GKI_BUF4_MAX (OBX_NUM_SERVERS + OBX_NUM_CLIENTS)
	#endif

	/* The ID of buffer pool 4. */
	#ifndef GKI_POOL_ID_4
	#define GKI_POOL_ID_4 4
	#endif

	/* The number of fixed GKI buffer pools.
	eL2CAP requires Pool ID 5
	If BTM_SCO_HCI_INCLUDED is FALSE, Pool ID 6 is unnecessary, otherwise set to 7
	If BTA_HL_INCLUDED is FALSE then Pool ID 7 is uncessary and set the following to 7, otherwise set to 8
	If BLE_INCLUDED is FALSE then Pool ID 8 is uncessary and set the following to 8, otherwise set to 9
	POOL_ID 9 is a public pool meant for large buffer needs such as SDP_DB
	*/
	#ifndef GKI_NUM_FIXED_BUF_POOLS
	#define GKI_NUM_FIXED_BUF_POOLS 10
	#endif

	/* The buffer pool usage mask. */
	#ifndef GKI_DEF_BUFPOOL_PERM_MASK
	/* Setting POOL_ID 9 as a public pool meant for large buffers such as SDP_DB */
	#define GKI_DEF_BUFPOOL_PERM_MASK 0xfdf0
	#endif

	/* The following is intended to be a reserved pool for L2CAP
	Flow control and retransmissions and intentionally kept out
	of order */

	/* The number of buffers in buffer pool 5. */
	#ifndef GKI_BUF5_MAX
	#define GKI_BUF5_MAX 64
	#endif

	/* The ID of buffer pool 5. */
	#ifndef GKI_POOL_ID_5
	#define GKI_POOL_ID_5 5
	#endif

	/* The size of the buffers in pool 5
	** Special pool used by L2CAP retransmissions only. This size based on segment
	** that will fit into both DH5 and 2-DH3 packet types after accounting for GKI
	** header. 13 bytes of max headers allows us a 339 payload max. (in btui_app.txt)
	** Note: 748 used for insight scriptwrapper with CAT-2 scripts.
	*/
	#ifndef GKI_BUF5_SIZE
	#define GKI_BUF5_SIZE 748
	#endif

	/* The following is intended to be a reserved pool for SCO
	over HCI data and intentionally kept out of order */

	/* The ID of buffer pool 6. */
	#ifndef GKI_POOL_ID_6
	#define GKI_POOL_ID_6 6
	#endif

	/* The size of the buffers in pool 6,
	BUF_SIZE = max SCO data 255 + sizeof(BT_HDR) = 8 + SCO packet header 3 + padding 2 = 268 */
	#ifndef GKI_BUF6_SIZE
	#define GKI_BUF6_SIZE 268
	#endif

	/* The number of buffers in buffer pool 6. */
	#ifndef GKI_BUF6_MAX
	#define GKI_BUF6_MAX 60
	#endif


	/* The following pool is a dedicated pool for HDP
	If a shared pool is more desirable then
	1. set BTA_HL_LRG_DATA_POOL_ID to the desired Gki Pool ID
	2. make sure that the shared pool size is larger than 9472
	3. adjust GKI_NUM_FIXED_BUF_POOLS accordingly since
	POOL ID 7 is not needed
	*/

	/* The ID of buffer pool 7. */
	#ifndef GKI_POOL_ID_7
	#define GKI_POOL_ID_7 7
	#endif

	/* The size of the buffers in pool 7 */
	#ifndef GKI_BUF7_SIZE
	#define GKI_BUF7_SIZE (10240 + 24)
	#endif

	/* The number of buffers in buffer pool 7. */
	#ifndef GKI_BUF7_MAX
	#define GKI_BUF7_MAX 2
	#endif

	/* The following pool is a dedicated pool for GATT
	If a shared pool is more desirable then
	1. set GATT_DB_POOL_ID to the desired Gki Pool ID
	2. make sure that the shared pool size fit a common GATT database needs
	3. adjust GKI_NUM_FIXED_BUF_POOLS accordingly since
	POOL ID 8 is not needed
	*/

	/* The ID of buffer pool 8. */
	#ifndef GKI_POOL_ID_8
	#define GKI_POOL_ID_8 8
	#endif

	/* The size of the buffers in pool 8 */
	#ifndef GKI_BUF8_SIZE
	#define GKI_BUF8_SIZE 128
	#endif

	/* The number of buffers in buffer pool 8. */
	#ifndef GKI_BUF8_MAX
	#define GKI_BUF8_MAX 30
	#endif

	/* The following pool is meant for large allocations such as SDP_DB */
	#ifndef GKI_POOL_ID_9
	#define GKI_POOL_ID_9 9
	#endif

	#ifndef GKI_BUF9_SIZE
	#define GKI_BUF9_SIZE 8192
	#endif

	#ifndef GKI_BUF9_MAX
	#define GKI_BUF9_MAX 5
	#endif

	/* The number of fixed and dynamic buffer pools */
	#ifndef GKI_NUM_TOTAL_BUF_POOLS
	#define GKI_NUM_TOTAL_BUF_POOLS 10
	#endif

	void LogMsg (UINT32 trace_set_mask, const char *fmt_str, ...);