/******************************************************************************
 *
 *  Copyright (c) 2014 The Android Open Source Project
 *  Copyright (C) 2009-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/*******************************************************************************
 *
 *  Filename:      btif_storage.c
 *
 *  Description:   Stores the local BT adapter and remote device properties in
 *                 NVRAM storage, typically as xml file in the
 *                 mobile's filesystem
 *
 *
 */

#define LOG_TAG "bt_btif_storage"

#include "btif_storage.h"

#include <alloca.h>
#include <base/logging.h>
#include <ctype.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>

#include "bt_common.h"
#include "bta_hd_api.h"
#include "bta_hh_api.h"
#include "btif_api.h"
#include "btif_config.h"
#include "btif_hd.h"
#include "btif_hh.h"
#include "btif_util.h"
#include "device/include/controller.h"
#include "osi/include/allocator.h"
#include "osi/include/compat.h"
#include "osi/include/config.h"
#include "osi/include/log.h"
#include "osi/include/osi.h"

/*******************************************************************************
 *  Constants & Macros
 ******************************************************************************/

// TODO(armansito): Find a better way than using a hardcoded path.
#define BTIF_STORAGE_PATH_BLUEDROID "/data/misc/bluedroid"

//#define BTIF_STORAGE_PATH_ADAPTER_INFO "adapter_info"
//#define BTIF_STORAGE_PATH_REMOTE_DEVICES "remote_devices"
#define BTIF_STORAGE_PATH_REMOTE_DEVTIME "Timestamp"
#define BTIF_STORAGE_PATH_REMOTE_DEVCLASS "DevClass"
#define BTIF_STORAGE_PATH_REMOTE_DEVTYPE "DevType"
#define BTIF_STORAGE_PATH_REMOTE_NAME "Name"
#define BTIF_STORAGE_PATH_REMOTE_VER_MFCT "Manufacturer"
#define BTIF_STORAGE_PATH_REMOTE_VER_VER "LmpVer"
#define BTIF_STORAGE_PATH_REMOTE_VER_SUBVER "LmpSubVer"

//#define BTIF_STORAGE_PATH_REMOTE_LINKKEYS "remote_linkkeys"
#define BTIF_STORAGE_PATH_REMOTE_ALIASE "Aliase"
#define BTIF_STORAGE_PATH_REMOTE_SERVICE "Service"
#define BTIF_STORAGE_PATH_REMOTE_HIDINFO "HidInfo"
#define BTIF_STORAGE_KEY_ADAPTER_NAME "Name"
#define BTIF_STORAGE_KEY_ADAPTER_SCANMODE "ScanMode"
#define BTIF_STORAGE_KEY_ADAPTER_DISC_TIMEOUT "DiscoveryTimeout"

/* This is a local property to add a device found */
#define BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP 0xFF

// TODO: This macro should be converted to a function
#define BTIF_STORAGE_GET_ADAPTER_PROP(s, t, v, l, p) \
  do {                                               \
    (p).type = (t);                                  \
    (p).val = (v);                                   \
    (p).len = (l);                                   \
    s = btif_storage_get_adapter_property(&(p));     \
  } while (0)

// TODO: This macro should be converted to a function
#define BTIF_STORAGE_GET_REMOTE_PROP(b, t, v, l, p)     \
  do {                                                  \
    (p).type = (t);                                     \
    (p).val = (v);                                      \
    (p).len = (l);                                      \
    btif_storage_get_remote_device_property((b), &(p)); \
  } while (0)

#define STORAGE_BDADDR_STRING_SZ (18) /* 00:11:22:33:44:55 */
#define STORAGE_UUID_STRING_SIZE \
  (36 + 1) /* 00001200-0000-1000-8000-00805f9b34fb; */
#define STORAGE_PINLEN_STRING_MAX_SIZE (2)  /* ascii pinlen max chars */
#define STORAGE_KEYTYPE_STRING_MAX_SIZE (1) /* ascii keytype max chars */

#define STORAGE_KEY_TYPE_MAX (10)

#define STORAGE_HID_ATRR_MASK_SIZE (4)
#define STORAGE_HID_SUB_CLASS_SIZE (2)
#define STORAGE_HID_APP_ID_SIZE (2)
#define STORAGE_HID_VENDOR_ID_SIZE (4)
#define STORAGE_HID_PRODUCT_ID_SIZE (4)
#define STORAGE_HID_VERSION_SIZE (4)
#define STORAGE_HID_CTRY_CODE_SIZE (2)
#define STORAGE_HID_DESC_LEN_SIZE (4)
#define STORAGE_HID_DESC_MAX_SIZE (2 * 512)

/* <18 char bd addr> <space> LIST< <36 char uuid> <;> > <keytype (dec)> <pinlen>
 */
#define BTIF_REMOTE_SERVICES_ENTRY_SIZE_MAX      \
  (STORAGE_BDADDR_STRING_SZ + 1 +                \
   STORAGE_UUID_STRING_SIZE * BT_MAX_NUM_UUIDS + \
   STORAGE_PINLEN_STRING_MAX_SIZE + STORAGE_KEYTYPE_STRING_MAX_SIZE)

#define STORAGE_REMOTE_LINKKEYS_ENTRY_SIZE (LINK_KEY_LEN * 2 + 1 + 2 + 1 + 2)

/* <18 char bd addr> <space>LIST <attr_mask> <space> > <sub_class> <space>
   <app_id> <space>
                                <vendor_id> <space> > <product_id> <space>
   <version> <space>
                                <ctry_code> <space> > <desc_len> <space>
   <desc_list> <space> */
#define BTIF_HID_INFO_ENTRY_SIZE_MAX                                  \
  (STORAGE_BDADDR_STRING_SZ + 1 + STORAGE_HID_ATRR_MASK_SIZE + 1 +    \
   STORAGE_HID_SUB_CLASS_SIZE + 1 + STORAGE_HID_APP_ID_SIZE + 1 +     \
   STORAGE_HID_VENDOR_ID_SIZE + 1 + STORAGE_HID_PRODUCT_ID_SIZE + 1 + \
   STORAGE_HID_VERSION_SIZE + 1 + STORAGE_HID_CTRY_CODE_SIZE + 1 +    \
   STORAGE_HID_DESC_LEN_SIZE + 1 + STORAGE_HID_DESC_MAX_SIZE + 1)

/* currently remote services is the potentially largest entry */
#define BTIF_STORAGE_MAX_LINE_SZ BTIF_REMOTE_SERVICES_ENTRY_SIZE_MAX

/* check against unv max entry size at compile time */
#if (BTIF_STORAGE_ENTRY_MAX_SIZE > UNV_MAXLINE_LENGTH)
#error "btif storage entry size exceeds unv max line size"
#endif

/*******************************************************************************
 *  Local type definitions
 ******************************************************************************/
typedef struct {
  uint32_t num_devices;
  RawAddress devices[BTM_SEC_MAX_DEVICE_RECORDS];
} btif_bonded_devices_t;

/*******************************************************************************
 *  External functions
 ******************************************************************************/

extern void btif_gatts_add_bonded_dev_from_nv(const RawAddress& bda);

/*******************************************************************************
 *  Internal Functions
 ******************************************************************************/

static bt_status_t btif_in_fetch_bonded_ble_device(
    const char* remote_bd_addr, int add,
    btif_bonded_devices_t* p_bonded_devices);
static bt_status_t btif_in_fetch_bonded_device(const char* bdstr);

static bool btif_has_ble_keys(const char* bdstr);

/*******************************************************************************
 *  Static functions
 ******************************************************************************/

static int prop2cfg(const RawAddress* remote_bd_addr, bt_property_t* prop) {
  std::string addrstr;
  const char* bdstr = addrstr.c_str();
  if (remote_bd_addr) {
    addrstr = remote_bd_addr->ToString();
    bdstr = addrstr.c_str();
  }

  BTIF_TRACE_DEBUG("in, bd addr:%s, prop type:%d, len:%d", bdstr, prop->type,
                   prop->len);
  char value[1024];
  if (prop->len <= 0 || prop->len > (int)sizeof(value) - 1) {
    BTIF_TRACE_ERROR("property type:%d, len:%d is invalid", prop->type,
                     prop->len);
    return false;
  }
  switch (prop->type) {
    case BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP:
      btif_config_set_int(bdstr, BTIF_STORAGE_PATH_REMOTE_DEVTIME,
                          (int)time(NULL));
      break;
    case BT_PROPERTY_BDNAME:
      strncpy(value, (char*)prop->val, prop->len);
      value[prop->len] = '\0';
      if (remote_bd_addr)
        btif_config_set_str(bdstr, BTIF_STORAGE_PATH_REMOTE_NAME, value);
      else
        btif_config_set_str("Adapter", BTIF_STORAGE_KEY_ADAPTER_NAME, value);
      break;
    case BT_PROPERTY_REMOTE_FRIENDLY_NAME:
      strncpy(value, (char*)prop->val, prop->len);
      value[prop->len] = '\0';
      btif_config_set_str(bdstr, BTIF_STORAGE_PATH_REMOTE_ALIASE, value);
      break;
    case BT_PROPERTY_ADAPTER_SCAN_MODE:
      btif_config_set_int("Adapter", BTIF_STORAGE_KEY_ADAPTER_SCANMODE,
                          *(int*)prop->val);
      break;
    case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT:
      btif_config_set_int("Adapter", BTIF_STORAGE_KEY_ADAPTER_DISC_TIMEOUT,
                          *(int*)prop->val);
      break;
    case BT_PROPERTY_CLASS_OF_DEVICE:
      btif_config_set_int(bdstr, BTIF_STORAGE_PATH_REMOTE_DEVCLASS,
                          *(int*)prop->val);
      break;
    case BT_PROPERTY_TYPE_OF_DEVICE:
      btif_config_set_int(bdstr, BTIF_STORAGE_PATH_REMOTE_DEVTYPE,
                          *(int*)prop->val);
      break;
    case BT_PROPERTY_UUIDS: {
      uint32_t i;
      char buf[64];
      value[0] = 0;
      for (i = 0; i < (prop->len) / sizeof(bt_uuid_t); i++) {
        bt_uuid_t* p_uuid = (bt_uuid_t*)prop->val + i;
        memset(buf, 0, sizeof(buf));
        uuid_to_string_legacy(p_uuid, buf, sizeof(buf));
        strcat(value, buf);
        // strcat(value, ";");
        strcat(value, " ");
      }
      btif_config_set_str(bdstr, BTIF_STORAGE_PATH_REMOTE_SERVICE, value);
      break;
    }
    case BT_PROPERTY_REMOTE_VERSION_INFO: {
      bt_remote_version_t* info = (bt_remote_version_t*)prop->val;

      if (!info) return false;

      btif_config_set_int(bdstr, BTIF_STORAGE_PATH_REMOTE_VER_MFCT,
                          info->manufacturer);
      btif_config_set_int(bdstr, BTIF_STORAGE_PATH_REMOTE_VER_VER,
                          info->version);
      btif_config_set_int(bdstr, BTIF_STORAGE_PATH_REMOTE_VER_SUBVER,
                          info->sub_ver);
    } break;

    default:
      BTIF_TRACE_ERROR("Unknown prop type:%d", prop->type);
      return false;
  }

  /* save changes if the device was bonded */
  if (btif_in_fetch_bonded_device(bdstr) == BT_STATUS_SUCCESS) {
    btif_config_flush();
  }

  return true;
}

static int cfg2prop(const RawAddress* remote_bd_addr, bt_property_t* prop) {
  std::string addrstr;
  const char* bdstr = addrstr.c_str();
  if (remote_bd_addr) {
    addrstr = remote_bd_addr->ToString();
    bdstr = addrstr.c_str();
  }
  BTIF_TRACE_DEBUG("in, bd addr:%s, prop type:%d, len:%d", bdstr, prop->type,
                   prop->len);
  if (prop->len <= 0) {
    BTIF_TRACE_ERROR("property type:%d, len:%d is invalid", prop->type,
                     prop->len);
    return false;
  }
  int ret = false;
  switch (prop->type) {
    case BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP:
      if (prop->len >= (int)sizeof(int))
        ret = btif_config_get_int(bdstr, BTIF_STORAGE_PATH_REMOTE_DEVTIME,
                                  (int*)prop->val);
      break;
    case BT_PROPERTY_BDNAME: {
      int len = prop->len;
      if (remote_bd_addr)
        ret = btif_config_get_str(bdstr, BTIF_STORAGE_PATH_REMOTE_NAME,
                                  (char*)prop->val, &len);
      else
        ret = btif_config_get_str("Adapter", BTIF_STORAGE_KEY_ADAPTER_NAME,
                                  (char*)prop->val, &len);
      if (ret && len && len <= prop->len)
        prop->len = len - 1;
      else {
        prop->len = 0;
        ret = false;
      }
      break;
    }
    case BT_PROPERTY_REMOTE_FRIENDLY_NAME: {
      int len = prop->len;
      ret = btif_config_get_str(bdstr, BTIF_STORAGE_PATH_REMOTE_ALIASE,
                                (char*)prop->val, &len);
      if (ret && len && len <= prop->len)
        prop->len = len - 1;
      else {
        prop->len = 0;
        ret = false;
      }
      break;
    }
    case BT_PROPERTY_ADAPTER_SCAN_MODE:
      if (prop->len >= (int)sizeof(int))
        ret = btif_config_get_int("Adapter", BTIF_STORAGE_KEY_ADAPTER_SCANMODE,
                                  (int*)prop->val);
      break;
    case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT:
      if (prop->len >= (int)sizeof(int))
        ret = btif_config_get_int(
            "Adapter", BTIF_STORAGE_KEY_ADAPTER_DISC_TIMEOUT, (int*)prop->val);
      break;
    case BT_PROPERTY_CLASS_OF_DEVICE:
      if (prop->len >= (int)sizeof(int))
        ret = btif_config_get_int(bdstr, BTIF_STORAGE_PATH_REMOTE_DEVCLASS,
                                  (int*)prop->val);
      break;
    case BT_PROPERTY_TYPE_OF_DEVICE:
      if (prop->len >= (int)sizeof(int))
        ret = btif_config_get_int(bdstr, BTIF_STORAGE_PATH_REMOTE_DEVTYPE,
                                  (int*)prop->val);
      break;
    case BT_PROPERTY_UUIDS: {
      char value[1280];
      int size = sizeof(value);
      if (btif_config_get_str(bdstr, BTIF_STORAGE_PATH_REMOTE_SERVICE, value,
                              &size)) {
        bt_uuid_t* p_uuid = (bt_uuid_t*)prop->val;
        size_t num_uuids =
            btif_split_uuids_string(value, p_uuid, BT_MAX_NUM_UUIDS);
        prop->len = num_uuids * sizeof(bt_uuid_t);
        ret = true;
      } else {
        prop->val = NULL;
        prop->len = 0;
      }
    } break;

    case BT_PROPERTY_REMOTE_VERSION_INFO: {
      bt_remote_version_t* info = (bt_remote_version_t*)prop->val;

      if (prop->len >= (int)sizeof(bt_remote_version_t)) {
        ret = btif_config_get_int(bdstr, BTIF_STORAGE_PATH_REMOTE_VER_MFCT,
                                  &info->manufacturer);

        if (ret == true)
          ret = btif_config_get_int(bdstr, BTIF_STORAGE_PATH_REMOTE_VER_VER,
                                    &info->version);

        if (ret == true)
          ret = btif_config_get_int(bdstr, BTIF_STORAGE_PATH_REMOTE_VER_SUBVER,
                                    &info->sub_ver);
      }
    } break;

    default:
      BTIF_TRACE_ERROR("Unknow prop type:%d", prop->type);
      return false;
  }
  return ret;
}

/*******************************************************************************
 *
 * Function         btif_in_fetch_bonded_devices
 *
 * Description      Internal helper function to fetch the bonded devices
 *                  from NVRAM
 *
 * Returns          BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
static bt_status_t btif_in_fetch_bonded_device(const char* bdstr) {
  bool bt_linkkey_file_found = false;

  LINK_KEY link_key;
  size_t size = sizeof(link_key);
  if (btif_config_get_bin(bdstr, "LinkKey", (uint8_t*)link_key, &size)) {
    int linkkey_type;
    if (btif_config_get_int(bdstr, "LinkKeyType", &linkkey_type)) {
      bt_linkkey_file_found = true;
    } else {
      bt_linkkey_file_found = false;
    }
  }
  if ((btif_in_fetch_bonded_ble_device(bdstr, false, NULL) !=
       BT_STATUS_SUCCESS) &&
      (!bt_linkkey_file_found)) {
    BTIF_TRACE_DEBUG("Remote device:%s, no link key or ble key found", bdstr);
    return BT_STATUS_FAIL;
  }
  return BT_STATUS_SUCCESS;
}

/*******************************************************************************
 *
 * Function         btif_in_fetch_bonded_devices
 *
 * Description      Internal helper function to fetch the bonded devices
 *                  from NVRAM
 *
 * Returns          BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
static bt_status_t btif_in_fetch_bonded_devices(
    btif_bonded_devices_t* p_bonded_devices, int add) {
  memset(p_bonded_devices, 0, sizeof(btif_bonded_devices_t));

  bool bt_linkkey_file_found = false;
  int device_type;

  for (const btif_config_section_iter_t* iter = btif_config_section_begin();
       iter != btif_config_section_end();
       iter = btif_config_section_next(iter)) {
    const char* name = btif_config_section_name(iter);
    if (!RawAddress::IsValidAddress(name)) continue;

    BTIF_TRACE_DEBUG("Remote device:%s", name);
    LINK_KEY link_key;
    size_t size = sizeof(link_key);
    if (btif_config_get_bin(name, "LinkKey", link_key, &size)) {
      int linkkey_type;
      if (btif_config_get_int(name, "LinkKeyType", &linkkey_type)) {
        RawAddress bd_addr;
        RawAddress::FromString(name, bd_addr);
        if (add) {
          DEV_CLASS dev_class = {0, 0, 0};
          int cod;
          int pin_length = 0;
          if (btif_config_get_int(name, "DevClass", &cod))
            uint2devclass((uint32_t)cod, dev_class);
          btif_config_get_int(name, "PinLength", &pin_length);
          BTA_DmAddDevice(bd_addr, dev_class, link_key, 0, 0,
                          (uint8_t)linkkey_type, 0, pin_length);

          if (btif_config_get_int(name, "DevType", &device_type) &&
              (device_type == BT_DEVICE_TYPE_DUMO)) {
            btif_gatts_add_bonded_dev_from_nv(bd_addr);
          }
        }
        bt_linkkey_file_found = true;
        p_bonded_devices->devices[p_bonded_devices->num_devices++] = bd_addr;
      } else {
        bt_linkkey_file_found = false;
      }
    }
    if (!btif_in_fetch_bonded_ble_device(name, add, p_bonded_devices) &&
        !bt_linkkey_file_found) {
      BTIF_TRACE_DEBUG("Remote device:%s, no link key or ble key found", name);
    }
  }
  return BT_STATUS_SUCCESS;
}

static void btif_read_le_key(const uint8_t key_type, const size_t key_len,
                             RawAddress bd_addr, const uint8_t addr_type,
                             const bool add_key, bool* device_added,
                             bool* key_found) {
  CHECK(device_added);
  CHECK(key_found);

  char buffer[100];
  memset(buffer, 0, sizeof(buffer));

  if (btif_storage_get_ble_bonding_key(&bd_addr, key_type, buffer, key_len) ==
      BT_STATUS_SUCCESS) {
    if (add_key) {
      if (!*device_added) {
        BTA_DmAddBleDevice(bd_addr, addr_type, BT_DEVICE_TYPE_BLE);
        *device_added = true;
      }

      BTIF_TRACE_DEBUG("%s() Adding key type %d for %s", __func__, key_type,
                       bd_addr.ToString().c_str());
      BTA_DmAddBleKey(bd_addr, (tBTA_LE_KEY_VALUE*)buffer, key_type);
    }

    *key_found = true;
  }
}

/*******************************************************************************
 * Functions
 *
 * Functions are synchronous and can be called by both from internal modules
 * such as BTIF_DM and by external entiries from HAL via BTIF_context_switch.
 * For OUT parameters, the caller is expected to provide the memory.
 * Caller is expected to provide a valid pointer to 'property->value' based on
 * the property->type.
 ******************************************************************************/

/*******************************************************************************
 *
 * Function         btif_split_uuids_string
 *
 * Description      Internal helper function to split the string of UUIDs
 *                  read from the NVRAM to an array
 *
 * Returns          Number of UUIDs parsed from the supplied string
 *
 ******************************************************************************/
size_t btif_split_uuids_string(const char* str, bt_uuid_t* p_uuid,
                               size_t max_uuids) {
  CHECK(str);
  CHECK(p_uuid);

  size_t num_uuids = 0;
  while (str && num_uuids < max_uuids) {
    bool rc = string_to_uuid(str, p_uuid++);
    if (!rc) break;
    num_uuids++;
    str = strchr(str, ' ');
    if (str) str++;
  }

  return num_uuids;
}

/*******************************************************************************
 *
 * Function         btif_storage_get_adapter_property
 *
 * Description      BTIF storage API - Fetches the adapter property->type
 *                  from NVRAM and fills property->val.
 *                  Caller should provide memory for property->val and
 *                  set the property->val
 *
 * Returns          BT_STATUS_SUCCESS if the fetch was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_get_adapter_property(bt_property_t* property) {
  /* Special handling for adapter address and BONDED_DEVICES */
  if (property->type == BT_PROPERTY_BDADDR) {
    RawAddress* bd_addr = (RawAddress*)property->val;
    /* Fetch the local BD ADDR */
    const controller_t* controller = controller_get_interface();
    if (controller->get_is_ready() == false) {
      LOG_ERROR(LOG_TAG,
                "%s: Controller not ready! Unable to return Bluetooth Address",
                __func__);
      *bd_addr = RawAddress::kEmpty;
      return BT_STATUS_FAIL;
    } else {
      LOG_ERROR(LOG_TAG, "%s: Controller ready!", __func__);
      *bd_addr = *controller->get_address();
    }
    property->len = RawAddress::kLength;
    return BT_STATUS_SUCCESS;
  } else if (property->type == BT_PROPERTY_ADAPTER_BONDED_DEVICES) {
    btif_bonded_devices_t bonded_devices;

    btif_in_fetch_bonded_devices(&bonded_devices, 0);

    BTIF_TRACE_DEBUG(
        "%s: Number of bonded devices: %d "
        "Property:BT_PROPERTY_ADAPTER_BONDED_DEVICES",
        __func__, bonded_devices.num_devices);

    if (bonded_devices.num_devices > 0) {
      property->len = bonded_devices.num_devices * RawAddress::kLength;
      memcpy(property->val, bonded_devices.devices, property->len);
    }

    /* if there are no bonded_devices, then length shall be 0 */
    return BT_STATUS_SUCCESS;
  } else if (property->type == BT_PROPERTY_UUIDS) {
    /* publish list of local supported services */
    bt_uuid_t* p_uuid = (bt_uuid_t*)property->val;
    uint32_t num_uuids = 0;
    uint32_t i;

    tBTA_SERVICE_MASK service_mask = btif_get_enabled_services_mask();
    LOG_INFO(LOG_TAG, "%s service_mask:0x%x", __func__, service_mask);
    for (i = 0; i < BTA_MAX_SERVICE_ID; i++) {
      /* This should eventually become a function when more services are enabled
       */
      if (service_mask & (tBTA_SERVICE_MASK)(1 << i)) {
        switch (i) {
          case BTA_HFP_SERVICE_ID: {
            uuid16_to_uuid128(UUID_SERVCLASS_AG_HANDSFREE, p_uuid + num_uuids);
            num_uuids++;
          }
          /* intentional fall through: Send both BFP & HSP UUIDs if HFP is
           * enabled */
          case BTA_HSP_SERVICE_ID: {
            uuid16_to_uuid128(UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY,
                              p_uuid + num_uuids);
            num_uuids++;
          } break;
          case BTA_A2DP_SOURCE_SERVICE_ID: {
            uuid16_to_uuid128(UUID_SERVCLASS_AUDIO_SOURCE, p_uuid + num_uuids);
            num_uuids++;
          } break;
          case BTA_A2DP_SINK_SERVICE_ID: {
            uuid16_to_uuid128(UUID_SERVCLASS_AUDIO_SINK, p_uuid + num_uuids);
            num_uuids++;
          } break;
          case BTA_HFP_HS_SERVICE_ID: {
            uuid16_to_uuid128(UUID_SERVCLASS_HF_HANDSFREE, p_uuid + num_uuids);
            num_uuids++;
          } break;
        }
      }
    }
    property->len = (num_uuids) * sizeof(bt_uuid_t);
    return BT_STATUS_SUCCESS;
  }

  /* fall through for other properties */
  if (!cfg2prop(NULL, property)) {
    return btif_dm_get_adapter_property(property);
  }
  return BT_STATUS_SUCCESS;
}

/*******************************************************************************
 *
 * Function         btif_storage_set_adapter_property
 *
 * Description      BTIF storage API - Stores the adapter property
 *                  to NVRAM
 *
 * Returns          BT_STATUS_SUCCESS if the store was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_set_adapter_property(bt_property_t* property) {
  return prop2cfg(NULL, property) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}

/*******************************************************************************
 *
 * Function         btif_storage_get_remote_device_property
 *
 * Description      BTIF storage API - Fetches the remote device property->type
 *                  from NVRAM and fills property->val.
 *                  Caller should provide memory for property->val and
 *                  set the property->val
 *
 * Returns          BT_STATUS_SUCCESS if the fetch was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_get_remote_device_property(
    const RawAddress* remote_bd_addr, bt_property_t* property) {
  return cfg2prop(remote_bd_addr, property) ? BT_STATUS_SUCCESS
                                            : BT_STATUS_FAIL;
}
/*******************************************************************************
 *
 * Function         btif_storage_set_remote_device_property
 *
 * Description      BTIF storage API - Stores the remote device property
 *                  to NVRAM
 *
 * Returns          BT_STATUS_SUCCESS if the store was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_set_remote_device_property(
    const RawAddress* remote_bd_addr, bt_property_t* property) {
  return prop2cfg(remote_bd_addr, property) ? BT_STATUS_SUCCESS
                                            : BT_STATUS_FAIL;
}

/*******************************************************************************
 *
 * Function         btif_storage_add_remote_device
 *
 * Description      BTIF storage API - Adds a newly discovered device to NVRAM
 *                  along with the timestamp. Also, stores the various
 *                  properties - RSSI, BDADDR, NAME (if found in EIR)
 *
 * Returns          BT_STATUS_SUCCESS if the store was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_add_remote_device(const RawAddress* remote_bd_addr,
                                           uint32_t num_properties,
                                           bt_property_t* properties) {
  uint32_t i = 0;
  /* TODO: If writing a property, fails do we go back undo the earlier
   * written properties? */
  for (i = 0; i < num_properties; i++) {
    /* Ignore the RSSI as this is not stored in DB */
    if (properties[i].type == BT_PROPERTY_REMOTE_RSSI) continue;

    /* address for remote device needs special handling as we also store
     * timestamp */
    if (properties[i].type == BT_PROPERTY_BDADDR) {
      bt_property_t addr_prop;
      memcpy(&addr_prop, &properties[i], sizeof(bt_property_t));
      addr_prop.type = (bt_property_type_t)BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP;
      btif_storage_set_remote_device_property(remote_bd_addr, &addr_prop);
    } else {
      btif_storage_set_remote_device_property(remote_bd_addr, &properties[i]);
    }
  }
  return BT_STATUS_SUCCESS;
}

/*******************************************************************************
 *
 * Function         btif_storage_add_bonded_device
 *
 * Description      BTIF storage API - Adds the newly bonded device to NVRAM
 *                  along with the link-key, Key type and Pin key length
 *
 * Returns          BT_STATUS_SUCCESS if the store was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/

bt_status_t btif_storage_add_bonded_device(RawAddress* remote_bd_addr,
                                           LINK_KEY link_key, uint8_t key_type,
                                           uint8_t pin_length) {
  std::string addrstr = remote_bd_addr->ToString();
  const char* bdstr = addrstr.c_str();
  int ret = btif_config_set_int(bdstr, "LinkKeyType", (int)key_type);
  ret &= btif_config_set_int(bdstr, "PinLength", (int)pin_length);
  ret &= btif_config_set_bin(bdstr, "LinkKey", link_key, sizeof(LINK_KEY));

  if (is_restricted_mode()) {
    BTIF_TRACE_WARNING("%s: '%s' pairing will be removed if unrestricted",
                       __func__, bdstr);
    btif_config_set_int(bdstr, "Restricted", 1);
  }

  /* write bonded info immediately */
  btif_config_flush();
  return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}

/*******************************************************************************
 *
 * Function         btif_storage_remove_bonded_device
 *
 * Description      BTIF storage API - Deletes the bonded device from NVRAM
 *
 * Returns          BT_STATUS_SUCCESS if the deletion was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_remove_bonded_device(
    const RawAddress* remote_bd_addr) {
  std::string addrstr = remote_bd_addr->ToString();
  const char* bdstr = addrstr.c_str();
  BTIF_TRACE_DEBUG("in bd addr:%s", bdstr);

  btif_storage_remove_ble_bonding_keys(remote_bd_addr);

  int ret = 1;
  if (btif_config_exist(bdstr, "LinkKeyType"))
    ret &= btif_config_remove(bdstr, "LinkKeyType");
  if (btif_config_exist(bdstr, "PinLength"))
    ret &= btif_config_remove(bdstr, "PinLength");
  if (btif_config_exist(bdstr, "LinkKey"))
    ret &= btif_config_remove(bdstr, "LinkKey");
  /* write bonded info immediately */
  btif_config_flush();
  return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}

/*******************************************************************************
 *
 * Function         btif_storage_load_bonded_devices
 *
 * Description      BTIF storage API - Loads all the bonded devices from NVRAM
 *                  and adds to the BTA.
 *                  Additionally, this API also invokes the adaper_properties_cb
 *                  and remote_device_properties_cb for each of the bonded
 *                  devices.
 *
 * Returns          BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_load_bonded_devices(void) {
  btif_bonded_devices_t bonded_devices;
  uint32_t i = 0;
  bt_property_t adapter_props[6];
  uint32_t num_props = 0;
  bt_property_t remote_properties[8];
  RawAddress addr;
  bt_bdname_t name, alias;
  bt_scan_mode_t mode;
  uint32_t disc_timeout;
  bt_uuid_t local_uuids[BT_MAX_NUM_UUIDS];
  bt_uuid_t remote_uuids[BT_MAX_NUM_UUIDS];
  bt_status_t status;

  btif_in_fetch_bonded_devices(&bonded_devices, 1);

  /* Now send the adapter_properties_cb with all adapter_properties */
  {
    memset(adapter_props, 0, sizeof(adapter_props));

    /* address */
    BTIF_STORAGE_GET_ADAPTER_PROP(status, BT_PROPERTY_BDADDR, &addr,
                                  sizeof(addr), adapter_props[num_props]);
    // Add BT_PROPERTY_BDADDR property into list only when successful.
    // Otherwise, skip this property entry.
    if (status == BT_STATUS_SUCCESS) {
      num_props++;
    }

    /* BD_NAME */
    BTIF_STORAGE_GET_ADAPTER_PROP(status, BT_PROPERTY_BDNAME, &name,
                                  sizeof(name), adapter_props[num_props]);
    num_props++;

    /* SCAN_MODE */
    /* TODO: At the time of BT on, always report the scan mode as 0 irrespective
     of the scan_mode during the previous enable cycle.
     This needs to be re-visited as part of the app/stack enable sequence
     synchronization */
    mode = BT_SCAN_MODE_NONE;
    adapter_props[num_props].type = BT_PROPERTY_ADAPTER_SCAN_MODE;
    adapter_props[num_props].len = sizeof(mode);
    adapter_props[num_props].val = &mode;
    num_props++;

    /* DISC_TIMEOUT */
    BTIF_STORAGE_GET_ADAPTER_PROP(status, BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT,
                                  &disc_timeout, sizeof(disc_timeout),
                                  adapter_props[num_props]);
    num_props++;

    /* BONDED_DEVICES */
    RawAddress* devices_list = (RawAddress*)osi_malloc(
        sizeof(RawAddress) * bonded_devices.num_devices);
    adapter_props[num_props].type = BT_PROPERTY_ADAPTER_BONDED_DEVICES;
    adapter_props[num_props].len =
        bonded_devices.num_devices * sizeof(RawAddress);
    adapter_props[num_props].val = devices_list;
    for (i = 0; i < bonded_devices.num_devices; i++) {
      devices_list[i] = bonded_devices.devices[i];
    }
    num_props++;

    /* LOCAL UUIDs */
    BTIF_STORAGE_GET_ADAPTER_PROP(status, BT_PROPERTY_UUIDS, local_uuids,
                                  sizeof(local_uuids),
                                  adapter_props[num_props]);
    num_props++;

    btif_adapter_properties_evt(BT_STATUS_SUCCESS, num_props, adapter_props);

    osi_free(devices_list);
  }

  BTIF_TRACE_EVENT("%s: %d bonded devices found", __func__,
                   bonded_devices.num_devices);

  {
    for (i = 0; i < bonded_devices.num_devices; i++) {
      RawAddress* p_remote_addr;

      /*
       * TODO: improve handling of missing fields in NVRAM.
       */
      uint32_t cod = 0;
      uint32_t devtype = 0;

      num_props = 0;
      p_remote_addr = &bonded_devices.devices[i];
      memset(remote_properties, 0, sizeof(remote_properties));
      BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_BDNAME, &name,
                                   sizeof(name), remote_properties[num_props]);
      num_props++;

      BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr,
                                   BT_PROPERTY_REMOTE_FRIENDLY_NAME, &alias,
                                   sizeof(alias), remote_properties[num_props]);
      num_props++;

      BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_CLASS_OF_DEVICE,
                                   &cod, sizeof(cod),
                                   remote_properties[num_props]);
      num_props++;

      BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_TYPE_OF_DEVICE,
                                   &devtype, sizeof(devtype),
                                   remote_properties[num_props]);
      num_props++;

      BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_UUIDS,
                                   remote_uuids, sizeof(remote_uuids),
                                   remote_properties[num_props]);
      num_props++;

      btif_remote_properties_evt(BT_STATUS_SUCCESS, p_remote_addr, num_props,
                                 remote_properties);
    }
  }
  return BT_STATUS_SUCCESS;
}

/*******************************************************************************
 *
 * Function         btif_storage_add_ble_bonding_key
 *
 * Description      BTIF storage API - Adds the newly bonded device to NVRAM
 *                  along with the ble-key, Key type and Pin key length
 *
 * Returns          BT_STATUS_SUCCESS if the store was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/

bt_status_t btif_storage_add_ble_bonding_key(RawAddress* remote_bd_addr,
                                             char* key, uint8_t key_type,
                                             uint8_t key_length) {
  const char* name;
  switch (key_type) {
    case BTIF_DM_LE_KEY_PENC:
      name = "LE_KEY_PENC";
      break;
    case BTIF_DM_LE_KEY_PID:
      name = "LE_KEY_PID";
      break;
    case BTIF_DM_LE_KEY_PCSRK:
      name = "LE_KEY_PCSRK";
      break;
    case BTIF_DM_LE_KEY_LENC:
      name = "LE_KEY_LENC";
      break;
    case BTIF_DM_LE_KEY_LCSRK:
      name = "LE_KEY_LCSRK";
      break;
    case BTIF_DM_LE_KEY_LID:
      name = "LE_KEY_LID";
      break;
    default:
      return BT_STATUS_FAIL;
  }
  int ret = btif_config_set_bin(remote_bd_addr->ToString().c_str(), name,
                                (const uint8_t*)key, key_length);
  btif_config_save();
  return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}

/*******************************************************************************
 *
 * Function         btif_storage_get_ble_bonding_key
 *
 * Description
 *
 * Returns          BT_STATUS_SUCCESS if the fetch was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_get_ble_bonding_key(RawAddress* remote_bd_addr,
                                             uint8_t key_type, char* key_value,
                                             int key_length) {
  const char* name;
  switch (key_type) {
    case BTIF_DM_LE_KEY_PENC:
      name = "LE_KEY_PENC";
      break;
    case BTIF_DM_LE_KEY_PID:
      name = "LE_KEY_PID";
      break;
    case BTIF_DM_LE_KEY_PCSRK:
      name = "LE_KEY_PCSRK";
      break;
    case BTIF_DM_LE_KEY_LENC:
      name = "LE_KEY_LENC";
      break;
    case BTIF_DM_LE_KEY_LCSRK:
      name = "LE_KEY_LCSRK";
      break;
    case BTIF_DM_LE_KEY_LID:
      name = "LE_KEY_LID";
    default:
      return BT_STATUS_FAIL;
  }
  size_t length = key_length;
  int ret = btif_config_get_bin(remote_bd_addr->ToString().c_str(), name,
                                (uint8_t*)key_value, &length);
  return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}

/*******************************************************************************
 *
 * Function         btif_storage_remove_ble_keys
 *
 * Description      BTIF storage API - Deletes the bonded device from NVRAM
 *
 * Returns          BT_STATUS_SUCCESS if the deletion was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_remove_ble_bonding_keys(
    const RawAddress* remote_bd_addr) {
  std::string addrstr = remote_bd_addr->ToString();
  const char* bdstr = addrstr.c_str();
  BTIF_TRACE_DEBUG(" %s in bd addr:%s", __func__, bdstr);
  int ret = 1;
  if (btif_config_exist(bdstr, "LE_KEY_PENC"))
    ret &= btif_config_remove(bdstr, "LE_KEY_PENC");
  if (btif_config_exist(bdstr, "LE_KEY_PID"))
    ret &= btif_config_remove(bdstr, "LE_KEY_PID");
  if (btif_config_exist(bdstr, "LE_KEY_PCSRK"))
    ret &= btif_config_remove(bdstr, "LE_KEY_PCSRK");
  if (btif_config_exist(bdstr, "LE_KEY_LENC"))
    ret &= btif_config_remove(bdstr, "LE_KEY_LENC");
  if (btif_config_exist(bdstr, "LE_KEY_LCSRK"))
    ret &= btif_config_remove(bdstr, "LE_KEY_LCSRK");
  btif_config_save();
  return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}

/*******************************************************************************
 *
 * Function         btif_storage_add_ble_local_key
 *
 * Description      BTIF storage API - Adds the ble key to NVRAM
 *
 * Returns          BT_STATUS_SUCCESS if the store was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_add_ble_local_key(char* key, uint8_t key_type,
                                           uint8_t key_length) {
  const char* name;
  switch (key_type) {
    case BTIF_DM_LE_LOCAL_KEY_IR:
      name = "LE_LOCAL_KEY_IR";
      break;
    case BTIF_DM_LE_LOCAL_KEY_IRK:
      name = "LE_LOCAL_KEY_IRK";
      break;
    case BTIF_DM_LE_LOCAL_KEY_DHK:
      name = "LE_LOCAL_KEY_DHK";
      break;
    case BTIF_DM_LE_LOCAL_KEY_ER:
      name = "LE_LOCAL_KEY_ER";
      break;
    default:
      return BT_STATUS_FAIL;
  }
  int ret =
      btif_config_set_bin("Adapter", name, (const uint8_t*)key, key_length);
  btif_config_save();
  return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}

/*******************************************************************************
 *
 * Function         btif_storage_get_ble_local_key
 *
 * Description
 *
 * Returns          BT_STATUS_SUCCESS if the fetch was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_get_ble_local_key(uint8_t key_type, char* key_value,
                                           int key_length) {
  const char* name;
  switch (key_type) {
    case BTIF_DM_LE_LOCAL_KEY_IR:
      name = "LE_LOCAL_KEY_IR";
      break;
    case BTIF_DM_LE_LOCAL_KEY_IRK:
      name = "LE_LOCAL_KEY_IRK";
      break;
    case BTIF_DM_LE_LOCAL_KEY_DHK:
      name = "LE_LOCAL_KEY_DHK";
      break;
    case BTIF_DM_LE_LOCAL_KEY_ER:
      name = "LE_LOCAL_KEY_ER";
      break;
    default:
      return BT_STATUS_FAIL;
  }
  size_t length = key_length;
  int ret = btif_config_get_bin("Adapter", name, (uint8_t*)key_value, &length);
  return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}

/*******************************************************************************
 *
 * Function         btif_storage_remove_ble_local_keys
 *
 * Description      BTIF storage API - Deletes the bonded device from NVRAM
 *
 * Returns          BT_STATUS_SUCCESS if the deletion was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_remove_ble_local_keys(void) {
  int ret = 1;
  if (btif_config_exist("Adapter", "LE_LOCAL_KEY_IR"))
    ret &= btif_config_remove("Adapter", "LE_LOCAL_KEY_IR");
  if (btif_config_exist("Adapter", "LE_LOCAL_KEY_IRK"))
    ret &= btif_config_remove("Adapter", "LE_LOCAL_KEY_IRK");
  if (btif_config_exist("Adapter", "LE_LOCAL_KEY_DHK"))
    ret &= btif_config_remove("Adapter", "LE_LOCAL_KEY_DHK");
  if (btif_config_exist("Adapter", "LE_LOCAL_KEY_ER"))
    ret &= btif_config_remove("Adapter", "LE_LOCAL_KEY_ER");
  btif_config_save();
  return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}

static bt_status_t btif_in_fetch_bonded_ble_device(
    const char* remote_bd_addr, int add,
    btif_bonded_devices_t* p_bonded_devices) {
  int device_type;
  int addr_type;
  bool device_added = false;
  bool key_found = false;

  if (!btif_config_get_int(remote_bd_addr, "DevType", &device_type))
    return BT_STATUS_FAIL;

  if ((device_type & BT_DEVICE_TYPE_BLE) == BT_DEVICE_TYPE_BLE ||
      btif_has_ble_keys(remote_bd_addr)) {
    BTIF_TRACE_DEBUG("%s Found a LE device: %s", __func__, remote_bd_addr);

    RawAddress bd_addr;
    RawAddress::FromString(remote_bd_addr, bd_addr);

    if (btif_storage_get_remote_addr_type(&bd_addr, &addr_type) !=
        BT_STATUS_SUCCESS) {
      addr_type = BLE_ADDR_PUBLIC;
      btif_storage_set_remote_addr_type(&bd_addr, BLE_ADDR_PUBLIC);
    }

    btif_read_le_key(BTIF_DM_LE_KEY_PENC, sizeof(tBTM_LE_PENC_KEYS), bd_addr,
                     addr_type, add, &device_added, &key_found);

    btif_read_le_key(BTIF_DM_LE_KEY_PID, sizeof(tBTM_LE_PID_KEYS), bd_addr,
                     addr_type, add, &device_added, &key_found);

    btif_read_le_key(BTIF_DM_LE_KEY_LID, sizeof(tBTM_LE_PID_KEYS), bd_addr,
                     addr_type, add, &device_added, &key_found);

    btif_read_le_key(BTIF_DM_LE_KEY_PCSRK, sizeof(tBTM_LE_PCSRK_KEYS), bd_addr,
                     addr_type, add, &device_added, &key_found);

    btif_read_le_key(BTIF_DM_LE_KEY_LENC, sizeof(tBTM_LE_LENC_KEYS), bd_addr,
                     addr_type, add, &device_added, &key_found);

    btif_read_le_key(BTIF_DM_LE_KEY_LCSRK, sizeof(tBTM_LE_LCSRK_KEYS), bd_addr,
                     addr_type, add, &device_added, &key_found);

    // Fill in the bonded devices
    if (device_added) {
      p_bonded_devices->devices[p_bonded_devices->num_devices++] = bd_addr;
      btif_gatts_add_bonded_dev_from_nv(bd_addr);
    }

    if (key_found) return BT_STATUS_SUCCESS;
  }
  return BT_STATUS_FAIL;
}

bt_status_t btif_storage_set_remote_addr_type(const RawAddress* remote_bd_addr,
                                              uint8_t addr_type) {
  int ret = btif_config_set_int(remote_bd_addr->ToString().c_str(), "AddrType",
                                (int)addr_type);
  return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}

bool btif_has_ble_keys(const char* bdstr) {
  return btif_config_exist(bdstr, "LE_KEY_PENC");
}

/*******************************************************************************
 *
 * Function         btif_storage_get_remote_addr_type
 *
 * Description      BTIF storage API - Fetches the remote addr type
 *
 * Returns          BT_STATUS_SUCCESS if the fetch was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_get_remote_addr_type(const RawAddress* remote_bd_addr,
                                              int* addr_type) {
  int ret = btif_config_get_int(remote_bd_addr->ToString().c_str(), "AddrType",
                                addr_type);
  return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
}
/*******************************************************************************
 *
 * Function         btif_storage_add_hid_device_info
 *
 * Description      BTIF storage API - Adds the hid information of bonded hid
 *                  devices-to NVRAM
 *
 * Returns          BT_STATUS_SUCCESS if the store was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/

bt_status_t btif_storage_add_hid_device_info(
    RawAddress* remote_bd_addr, uint16_t attr_mask, uint8_t sub_class,
    uint8_t app_id, uint16_t vendor_id, uint16_t product_id, uint16_t version,
    uint8_t ctry_code, uint16_t ssr_max_latency, uint16_t ssr_min_tout,
    uint16_t dl_len, uint8_t* dsc_list) {
  BTIF_TRACE_DEBUG("btif_storage_add_hid_device_info:");
  std::string addrstr = remote_bd_addr->ToString();
  const char* bdstr = addrstr.c_str();
  btif_config_set_int(bdstr, "HidAttrMask", attr_mask);
  btif_config_set_int(bdstr, "HidSubClass", sub_class);
  btif_config_set_int(bdstr, "HidAppId", app_id);
  btif_config_set_int(bdstr, "HidVendorId", vendor_id);
  btif_config_set_int(bdstr, "HidProductId", product_id);
  btif_config_set_int(bdstr, "HidVersion", version);
  btif_config_set_int(bdstr, "HidCountryCode", ctry_code);
  btif_config_set_int(bdstr, "HidSSRMaxLatency", ssr_max_latency);
  btif_config_set_int(bdstr, "HidSSRMinTimeout", ssr_min_tout);
  if (dl_len > 0) btif_config_set_bin(bdstr, "HidDescriptor", dsc_list, dl_len);
  btif_config_save();
  return BT_STATUS_SUCCESS;
}

/*******************************************************************************
 *
 * Function         btif_storage_load_bonded_hid_info
 *
 * Description      BTIF storage API - Loads hid info for all the bonded devices
 *                  from NVRAM and adds those devices  to the BTA_HH.
 *
 * Returns          BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_load_bonded_hid_info(void) {
  RawAddress bd_addr;
  tBTA_HH_DEV_DSCP_INFO dscp_info;
  uint16_t attr_mask;
  uint8_t sub_class;
  uint8_t app_id;

  memset(&dscp_info, 0, sizeof(dscp_info));
  for (const btif_config_section_iter_t* iter = btif_config_section_begin();
       iter != btif_config_section_end();
       iter = btif_config_section_next(iter)) {
    const char* name = btif_config_section_name(iter);
    if (!RawAddress::IsValidAddress(name)) continue;

    BTIF_TRACE_DEBUG("Remote device:%s", name);
    int value;
    if (btif_in_fetch_bonded_device(name) == BT_STATUS_SUCCESS) {
      if (btif_config_get_int(name, "HidAttrMask", &value)) {
        attr_mask = (uint16_t)value;

        btif_config_get_int(name, "HidSubClass", &value);
        sub_class = (uint8_t)value;

        btif_config_get_int(name, "HidAppId", &value);
        app_id = (uint8_t)value;

        btif_config_get_int(name, "HidVendorId", &value);
        dscp_info.vendor_id = (uint16_t)value;

        btif_config_get_int(name, "HidProductId", &value);
        dscp_info.product_id = (uint16_t)value;

        btif_config_get_int(name, "HidVersion", &value);
        dscp_info.version = (uint8_t)value;

        btif_config_get_int(name, "HidCountryCode", &value);
        dscp_info.ctry_code = (uint8_t)value;

        value = 0;
        btif_config_get_int(name, "HidSSRMaxLatency", &value);
        dscp_info.ssr_max_latency = (uint16_t)value;

        value = 0;
        btif_config_get_int(name, "HidSSRMinTimeout", &value);
        dscp_info.ssr_min_tout = (uint16_t)value;

        size_t len = btif_config_get_bin_length(name, "HidDescriptor");
        if (len > 0) {
          dscp_info.descriptor.dl_len = (uint16_t)len;
          dscp_info.descriptor.dsc_list = (uint8_t*)alloca(len);
          btif_config_get_bin(name, "HidDescriptor",
                              (uint8_t*)dscp_info.descriptor.dsc_list, &len);
        }
        RawAddress::FromString(name, bd_addr);
        // add extracted information to BTA HH
        if (btif_hh_add_added_dev(bd_addr, attr_mask)) {
          BTA_HhAddDev(bd_addr, attr_mask, sub_class, app_id, dscp_info);
        }
      }
    } else {
      if (btif_config_get_int(name, "HidAttrMask", &value)) {
        btif_storage_remove_hid_info(&bd_addr);
        RawAddress::FromString(name, bd_addr);
      }
    }
  }

  return BT_STATUS_SUCCESS;
}

/*******************************************************************************
 *
 * Function         btif_storage_remove_hid_info
 *
 * Description      BTIF storage API - Deletes the bonded hid device info from
 *                  NVRAM
 *
 * Returns          BT_STATUS_SUCCESS if the deletion was successful,
 *                  BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_remove_hid_info(RawAddress* remote_bd_addr) {
  std::string addrstr = remote_bd_addr->ToString();
  const char* bdstr = addrstr.c_str();

  btif_config_remove(bdstr, "HidAttrMask");
  btif_config_remove(bdstr, "HidSubClass");
  btif_config_remove(bdstr, "HidAppId");
  btif_config_remove(bdstr, "HidVendorId");
  btif_config_remove(bdstr, "HidProductId");
  btif_config_remove(bdstr, "HidVersion");
  btif_config_remove(bdstr, "HidCountryCode");
  btif_config_remove(bdstr, "HidSSRMaxLatency");
  btif_config_remove(bdstr, "HidSSRMinTimeout");
  btif_config_remove(bdstr, "HidDescriptor");
  btif_config_save();
  return BT_STATUS_SUCCESS;
}

/*******************************************************************************
 *
 * Function         btif_storage_is_restricted_device
 *
 * Description      BTIF storage API - checks if this device is a restricted
 *                  device
 *
 * Returns          true  if the device is labeled as restricted
 *                  false otherwise
 *
 ******************************************************************************/
bool btif_storage_is_restricted_device(const RawAddress* remote_bd_addr) {
  return btif_config_exist(remote_bd_addr->ToString().c_str(), "Restricted");
}

/*******************************************************************************
 * Function         btif_storage_load_hidd
 *
 * Description      Loads hidd bonded device and "plugs" it into hidd
 *
 * Returns          BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
 *
 ******************************************************************************/
bt_status_t btif_storage_load_hidd(void) {

  for (const btif_config_section_iter_t* iter = btif_config_section_begin();
       iter != btif_config_section_end();
       iter = btif_config_section_next(iter)) {
    const char* name = btif_config_section_name(iter);
    if (!RawAddress::IsValidAddress(name)) continue;

    BTIF_TRACE_DEBUG("Remote device:%s", name);
    int value;
    if (btif_in_fetch_bonded_device(name) == BT_STATUS_SUCCESS) {
      if (btif_config_get_int(name, "HidDeviceCabled", &value)) {
        RawAddress bd_addr;
        RawAddress::FromString(name, bd_addr);
        BTA_HdAddDevice(bd_addr);
        break;
      }
    }
  }

  return BT_STATUS_SUCCESS;
}

/*******************************************************************************
 *
 * Function         btif_storage_set_hidd
 *
 * Description      Stores hidd bonded device info in nvram.
 *
 * Returns          BT_STATUS_SUCCESS
 *
 ******************************************************************************/
bt_status_t btif_storage_set_hidd(RawAddress* remote_bd_addr) {
  btif_config_set_int(remote_bd_addr->ToString().c_str(), "HidDeviceCabled", 1);
  btif_config_save();
  return BT_STATUS_SUCCESS;
}

/*******************************************************************************
 *
 * Function         btif_storage_remove_hidd
 *
 * Description      Removes hidd bonded device info from nvram
 *
 * Returns          BT_STATUS_SUCCESS
 *
 ******************************************************************************/
bt_status_t btif_storage_remove_hidd(RawAddress* remote_bd_addr) {
  btif_config_remove(remote_bd_addr->ToString().c_str(), "HidDeviceCabled");
  btif_config_save();

  return BT_STATUS_SUCCESS;
}

// Get the name of a device from btif for interop database matching.
bool btif_storage_get_stored_remote_name(const RawAddress& bd_addr,
                                         char* name) {
  bt_property_t property;
  property.type = BT_PROPERTY_BDNAME;
  property.len = BTM_MAX_REM_BD_NAME_LEN;
  property.val = name;

  return (btif_storage_get_remote_device_property(&bd_addr, &property) ==
          BT_STATUS_SUCCESS);
}