| /****************************************************************************** |
| * |
| * Copyright (C) 2006-2012 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * This is the interface file for device mananger callout functions. |
| * |
| ******************************************************************************/ |
| #ifndef BTA_DM_CO_H |
| #define BTA_DM_CO_H |
| |
| #include "bta_sys.h" |
| #include "btm_api.h" |
| |
| #ifndef BTA_SCO_OUT_PKT_SIZE |
| #define BTA_SCO_OUT_PKT_SIZE BTM_SCO_DATA_SIZE_MAX |
| #endif |
| |
| /***************************************************************************** |
| * Function Declarations |
| ****************************************************************************/ |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_io_req |
| * |
| * Description This callout function is executed by DM to get IO |
| * capabilities of the local device for the Simple Pairing |
| * process |
| * |
| * Parameters bd_addr - The peer device |
| * *p_io_cap - The local Input/Output capabilities |
| * *p_oob_data - true, if OOB data is available for the peer |
| * device. |
| * *p_auth_req - true, if MITM protection is required. |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_io_req(const RawAddress& bd_addr, tBTA_IO_CAP* p_io_cap, |
| tBTA_OOB_DATA* p_oob_data, |
| tBTA_AUTH_REQ* p_auth_req, bool is_orig); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_io_rsp |
| * |
| * Description This callout function is executed by DM to report IO |
| * capabilities of the peer device for the Simple Pairing |
| * process |
| * |
| * Parameters bd_addr - The peer device |
| * io_cap - The remote Input/Output capabilities |
| * oob_data - true, if OOB data is available for the peer |
| * device. |
| * auth_req - true, if MITM protection is required. |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_io_rsp(const RawAddress& bd_addr, tBTA_IO_CAP io_cap, |
| tBTA_OOB_DATA oob_data, tBTA_AUTH_REQ auth_req); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_lk_upgrade |
| * |
| * Description This callout function is executed by DM to check if the |
| * platform wants allow link key upgrade |
| * |
| * Parameters bd_addr - The peer device |
| * *p_upgrade - true, if link key upgrade is desired. |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_lk_upgrade(const RawAddress& bd_addr, bool* p_upgrade); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_loc_oob |
| * |
| * Description This callout function is executed by DM to report the OOB |
| * data of the local device for the Simple Pairing process |
| * |
| * Parameters valid - true, if the local OOB data is retrieved from LM |
| * c - Simple Pairing Hash C |
| * r - Simple Pairing Randomnizer R |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_loc_oob(bool valid, BT_OCTET16 c, BT_OCTET16 r); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_rmt_oob |
| * |
| * Description This callout function is executed by DM to request the OOB |
| * data for the remote device for the Simple Pairing process |
| * |
| * Parameters bd_addr - The peer device |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_rmt_oob(const RawAddress& bd_addr); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_sco_co_open |
| * |
| * Description This function is executed when a SCO connection is open. |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void bta_dm_sco_co_open(uint16_t handle, uint8_t pkt_size, |
| uint16_t event); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_sco_co_close |
| * |
| * Description This function is called when a SCO connection is closed |
| * |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void bta_dm_sco_co_close(void); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_sco_co_out_data |
| * |
| * Description This function is called to send SCO data over HCI. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void bta_dm_sco_co_out_data(BT_HDR** p_buf); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_sco_co_in_data |
| * |
| * Description This function is called to send incoming SCO data to |
| * application. |
| * |
| * Returns void |
| * |
| ******************************************************************************/ |
| extern void bta_dm_sco_co_in_data(BT_HDR* p_buf, tBTM_SCO_DATA_FLAG status); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_ble_io_req |
| * |
| * Description This callout function is executed by DM to get BLE IO |
| * capabilities before SMP pairing gets going. |
| * |
| * Parameters bd_addr - The peer device |
| * *p_io_cap - The local Input/Output capabilities |
| * *p_oob_data - true, if OOB data is available for the peer |
| * device. |
| * *p_auth_req - Auth request setting (Bonding and MITM |
| * required or not) |
| * *p_max_key_size - max key size local device supported. |
| * *p_init_key - initiator keys. |
| * *p_resp_key - responder keys. |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_ble_io_req( |
| const RawAddress& bd_addr, tBTA_IO_CAP* p_io_cap, tBTA_OOB_DATA* p_oob_data, |
| tBTA_LE_AUTH_REQ* p_auth_req, uint8_t* p_max_key_size, |
| tBTA_LE_KEY_TYPE* p_init_key, tBTA_LE_KEY_TYPE* p_resp_key); |
| |
| /******************************************************************************* |
| * |
| * Function bta_dm_co_ble_local_key_reload |
| * |
| * Description This callout function is to load the local BLE keys if |
| * available on the device. |
| * |
| * Parameters none |
| * |
| * Returns void. |
| * |
| ******************************************************************************/ |
| extern void bta_dm_co_ble_load_local_keys( |
| tBTA_DM_BLE_LOCAL_KEY_MASK* p_key_mask, BT_OCTET16 er, |
| tBTA_BLE_LOCAL_ID_KEYS* p_id_keys); |
| |
| #endif /* BTA_DM_CO_H */ |
