/******************************************************************************
 *
 *  Copyright (C) 2009-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  This is the public interface file for the HeaLth device profile (HL)
 *  subsystem of BTA, Broadcom's Bluetooth application layer for mobile
 *  phones.
 *
 ******************************************************************************/
#ifndef BTA_HL_API_H
#define BTA_HL_API_H

#include "bta_api.h"
#include "btm_api.h"
#include "mca_api.h"

/*****************************************************************************
 *  Constants and data types
 ****************************************************************************/
/* Extra Debug Code */
#ifndef BTA_HL_DEBUG
#define BTA_HL_DEBUG TRUE
#endif

#ifndef BTA_HL_NUM_APPS
#define BTA_HL_NUM_APPS 12
#endif

#ifndef BTA_HL_NUM_MDEPS
#define BTA_HL_NUM_MDEPS 13
#endif

#ifndef BTA_HL_NUM_MCLS
#define BTA_HL_NUM_MCLS 7
#endif

#ifndef BTA_HL_NUM_MDLS_PER_MDEP
#define BTA_HL_NUM_MDLS_PER_MDEP 4
#endif

#ifndef BTA_HL_NUM_MDLS_PER_MCL
#define BTA_HL_NUM_MDLS_PER_MCL 10
#endif

#ifndef BTA_HL_NUM_DATA_TYPES
#define BTA_HL_NUM_DATA_TYPES                        \
  5 /* maximum number of data types can be supported \
       per MDEP ID */
#endif

#define BTA_HL_MCAP_RSP_TOUT 2 /* 2 seconds */

#ifndef BTA_HL_CCH_NUM_FILTER_ELEMS
#define BTA_HL_CCH_NUM_FILTER_ELEMS 3
#endif

#ifndef BTA_HL_NUM_SDP_CBACKS
#define BTA_HL_NUM_SDP_CBACKS 7
#endif

#ifndef BTA_HL_NUM_SDP_RECS
#define BTA_HL_NUM_SDP_RECS 5
#endif

#ifndef BTA_HL_NUM_SDP_MDEPS
#define BTA_HL_NUM_SDP_MDEPS 12
#endif

#ifndef BTA_HL_NUM_SVC_ELEMS
#define BTA_HL_NUM_SVC_ELEMS 2
#endif

#ifndef BTA_HL_NUM_PROTO_ELEMS
#define BTA_HL_NUM_PROTO_ELEMS 2
#endif

#define BTA_HL_VERSION 0x0101
#define BTA_HL_NUM_ADD_PROTO_LISTS 1
#define BTA_HL_NUM_ADD_PROTO_ELEMS 2
#define BTA_HL_MDEP_SEQ_SIZE 20
#define BTA_HL_VAL_ARRY_SIZE 320

#ifndef BTA_HL_NUM_MDL_CFGS
#define BTA_HL_NUM_MDL_CFGS \
  16 /* numer of MDL cfg saved in the persistent memory*/
#endif

#define BTA_HL_NUM_TIMERS 7

#define BTA_HL_CCH_RSP_TOUT 2000
#define BTA_HL_MAX_TIME 255
#define BTA_HL_MIN_TIME 1
#define BTA_HL_INVALID_APP_HANDLE 0xFF
#define BTA_HL_INVALID_MCL_HANDLE 0xFF
#define BTA_HL_INVALID_MDL_HANDLE 0xFFFF

#define BTA_HL_STATUS_OK 0
#define BTA_HL_STATUS_FAIL 1 /* Used to pass all other errors */
#define BTA_HL_STATUS_ABORTED 2
#define BTA_HL_STATUS_NO_RESOURCE 3
#define BTA_HL_STATUS_LAST_ITEM 4
#define BTA_HL_STATUS_DUPLICATE_APP_ID 5
#define BTA_HL_STATUS_INVALID_APP_HANDLE 6
#define BTA_HL_STATUS_INVALID_MCL_HANDLE 7
#define BTA_HL_STATUS_MCAP_REG_FAIL 8
#define BTA_HL_STATUS_MDEP_CO_FAIL 9
#define BTA_HL_STATUS_ECHO_CO_FAIL 10
#define BTA_HL_STATUS_MDL_CFG_CO_FAIL 11
#define BTA_HL_STATUS_SDP_NO_RESOURCE 12
#define BTA_HL_STATUS_SDP_FAIL 13
#define BTA_HL_STATUS_NO_CCH 14
#define BTA_HL_STATUS_NO_MCL 15

#define BTA_HL_STATUS_NO_FIRST_RELIABLE 17
#define BTA_HL_STATUS_INVALID_DCH_CFG 18
#define BTA_HL_STATUS_INVALID_MDL_HANDLE 19
#define BTA_HL_STATUS_INVALID_BD_ADDR 20
#define BTA_HL_STATUS_INVALID_RECONNECT_CFG 21
#define BTA_HL_STATUS_ECHO_TEST_BUSY 22
#define BTA_HL_STATUS_INVALID_LOCAL_MDEP_ID 23
#define BTA_HL_STATUS_INVALID_MDL_ID 24
#define BTA_HL_STATUS_NO_MDL_ID_FOUND 25
#define BTA_HL_STATUS_DCH_BUSY 26 /* DCH is congested*/
#define BTA_HL_STATUS_INVALID_CTRL_PSM 27
#define BTA_HL_STATUS_DUPLICATE_CCH_OPEN 28

typedef uint8_t tBTA_HL_STATUS;
typedef tMCA_HANDLE tBTA_HL_APP_HANDLE;
typedef tMCA_CL tBTA_HL_MCL_HANDLE;
typedef tMCA_DL tBTA_HL_MDL_HANDLE;
enum {
  BTA_HL_DEVICE_TYPE_SINK,
  BTA_HL_DEVICE_TYPE_SOURCE,
  BTA_HL_DEVICE_TYPE_DUAL
};

typedef uint8_t tBTA_HL_DEVICE_TYPE;

#define BTA_HL_SDP_IEEE_11073_20601 0x01

#define BTA_HL_MCAP_SUP_RECONNECT_MASK_INIT 2   /* 0x02 */
#define BTA_HL_MCAP_SUP_RECONNECT_MASK_ACCEPT 4 /* 0x04 */
#define BTA_HL_MCAP_SUP_CSP_MASK_SYNC_SLAVE 0   /* 0x08 */
#define BTA_HL_MCAP_SUP_CSP_MASK_SYNC_MASTER 0  /* 0x10 */

#define BTA_HL_MCAP_SUP_PROC_MASK          \
  (BTA_HL_MCAP_SUP_RECONNECT_MASK_INIT |   \
   BTA_HL_MCAP_SUP_RECONNECT_MASK_ACCEPT | \
   BTA_HL_MCAP_SUP_CSP_MASK_SYNC_SLAVE | BTA_HL_MCAP_SUP_CSP_MASK_SYNC_MASTER)
#define BTA_HL_MDEP_ROLE_SOURCE 0x00
#define BTA_HL_MDEP_ROLE_SINK 0x01

typedef uint8_t tBTA_HL_MDEP_ROLE;

#define BTA_HL_MDEP_ROLE_MASK_SOURCE 0x01 /* bit mask */
#define BTA_HL_MDEP_ROLE_MASK_SINK 0x02
typedef uint8_t tBTA_HL_MDEP_ROLE_MASK;

#define BTA_HL_ECHO_TEST_MDEP_ID 0
#define BTA_HL_ECHO_TEST_MDEP_CFG_IDX 0

#define BTA_HL_INVALID_MDEP_ID 0xFF
typedef tMCA_DEP tBTA_HL_MDEP_ID; /* 0 is for echo test,
                                   0x01-0x7F availave for use,
                                   0x80-0xFF reserved*/

#define BTA_HL_DELETE_ALL_MDL_IDS 0xFFFF
#define BTA_HL_MAX_MDL_VAL 0xFEFF
typedef uint16_t tBTA_HL_MDL_ID; /* 0x0000 reserved,
                                  0x0001-0xFEFF dynamic range,
                                  0xFF00-0xFFFE reserved,
                                  0xFFFF indicates all MDLs*/

#define BTA_HL_MDEP_DESP_LEN 35

#define BTA_HL_DCH_MODE_RELIABLE 0
#define BTA_HL_DCH_MODE_STREAMING 1

typedef uint8_t tBTA_HL_DCH_MODE;

#define BTA_HL_DCH_CFG_NO_PREF 0
#define BTA_HL_DCH_CFG_RELIABLE 1
#define BTA_HL_DCH_CFG_STREAMING 2
#define BTA_HL_DCH_CFG_UNKNOWN 0xFF

typedef uint8_t tBTA_HL_DCH_CFG;

/* The Default DCH CFG for the echo test when the device is a Source */
#define BTA_HL_DEFAULT_ECHO_TEST_SRC_DCH_CFG BTA_HL_DCH_CFG_RELIABLE

#define BTA_HL_DCH_CREATE_RSP_SUCCESS 0
#define BTA_HL_DCH_CREATE_RSP_CFG_REJ 1

typedef uint8_t tBTA_HL_DCH_CREATE_RSP;

#define BTA_HL_MCAP_SUP_PROC_RECONNECT_INIT 0x02
#define BTA_HL_MCAP_SUP_PROC_RECONNECT_APT 0x04
#define BTA_HL_MCAP_SUP_PROC_CSP_SLAVE 0x08
#define BTA_HL_MCAP_SUP_PROC_CSP_MASTER 0x10

typedef uint8_t tBTA_HL_SUP_PROC_MASK;

typedef struct {
  uint16_t max_rx_apdu_size; /* local rcv MTU */
  uint16_t max_tx_apdu_size; /* maximum TX APDU size*/
} tBTA_HL_ECHO_CFG;

typedef struct {
  uint16_t data_type;
  uint16_t max_rx_apdu_size; /* local rcv MTU */
  uint16_t max_tx_apdu_size; /* maximum TX APDU size*/
  char desp[BTA_HL_MDEP_DESP_LEN + 1];
} tBTA_HL_MDEP_DATA_TYPE_CFG;

typedef struct {
  tBTA_HL_MDEP_ROLE mdep_role;
  uint8_t num_of_mdep_data_types;
  tBTA_HL_MDEP_DATA_TYPE_CFG data_cfg[BTA_HL_NUM_DATA_TYPES];
} tBTA_HL_MDEP_CFG;

typedef struct {
  tBTA_HL_MDEP_ID mdep_id; /* MDEP ID 0x01-0x7F */
  tBTA_HL_MDEP_CFG mdep_cfg;
  uint8_t ori_app_id;
} tBTA_HL_MDEP;

typedef struct {
  tBTA_HL_MDEP mdep[BTA_HL_NUM_MDEPS];
  tBTA_HL_ECHO_CFG echo_cfg;
  tBTA_HL_MDEP_ROLE_MASK app_role_mask;
  bool advertize_source_sdp;
  uint8_t num_of_mdeps;
} tBTA_HL_SUP_FEATURE;

typedef struct {
  bool delete_req_pending;
  tBTA_HL_MDL_ID mdl_id;
  tBTA_HL_MCL_HANDLE mcl_handle;
} tBTA_HL_DELETE_MDL;

typedef struct {
  uint8_t time;
  uint16_t mtu;
  tBTA_HL_MDL_ID mdl_id;
  tBTA_HL_MDEP_ID local_mdep_id;
  tBTA_HL_MDEP_ROLE local_mdep_role;
  bool active; /* true if this item is in use */
  tBTA_HL_DCH_MODE dch_mode;
  uint8_t fcs;
  BD_ADDR peer_bd_addr;
} tBTA_HL_MDL_CFG;

/* Maximum number of supported feature list items (list_elem in
 * tSDP_SUP_FEATURE_ELEM) */
#define BTA_HL_NUM_SUP_FEATURE_ELEMS 13
#define BTA_HL_SUP_FEATURE_SDP_BUF_SIZE 512
/* This structure is used to add supported feature lists and find supported
 * feature elements */
typedef struct {
  uint8_t mdep_id;
  uint16_t data_type;
  tBTA_HL_MDEP_ROLE mdep_role;
  char* p_mdep_desp;
} tBTA_HL_SUP_FEATURE_ELEM;

typedef struct {
  uint16_t num_elems;
  tBTA_HL_SUP_FEATURE_ELEM list_elem[BTA_HL_NUM_SUP_FEATURE_ELEMS];
} tBTA_HL_SUP_FEATURE_LIST_ELEM;

typedef struct {
  tBTA_HL_DEVICE_TYPE dev_type; /* sink, source or dual roles */
  tBTA_SEC sec_mask;            /* security mask for accepting conenction*/
  const char*
      p_srv_name; /* service name to be used in the SDP; null terminated*/
  const char* p_srv_desp; /* service description to be used in the SDP; null
                             terminated */
  const char*
      p_provider_name; /* provide name to be used in the SDP; null terminated */
} tBTA_HL_REG_PARAM;

typedef struct {
  uint16_t ctrl_psm;
  BD_ADDR bd_addr;   /* Address of peer device */
  tBTA_SEC sec_mask; /* security mask for initiating connection*/
} tBTA_HL_CCH_OPEN_PARAM;

typedef struct {
  uint16_t ctrl_psm;
  tBTA_HL_MDEP_ID local_mdep_id; /* local MDEP ID */
  tBTA_HL_MDEP_ID peer_mdep_id;  /* peer mdep id */
  tBTA_HL_DCH_CFG local_cfg;
  tBTA_SEC sec_mask; /* security mask for initiating connection*/
} tBTA_HL_DCH_OPEN_PARAM;

typedef struct {
  uint16_t ctrl_psm;
  tBTA_HL_MDL_ID mdl_id;
} tBTA_HL_DCH_RECONNECT_PARAM;

typedef struct {
  uint16_t ctrl_psm;
  uint16_t pkt_size;
  tBTA_HL_DCH_CFG local_cfg;
} tBTA_HL_DCH_ECHO_TEST_PARAM;

typedef struct {
  uint16_t buf_size;
  uint8_t p_buf; /* buffer pointer */
} tBTA_HL_DCH_BUF_INFO;

typedef struct {
  tBTA_HL_MDEP_ID local_mdep_id; /* local MDEP ID */
  tBTA_HL_MDL_ID mdl_id;
  tBTA_HL_DCH_CREATE_RSP rsp_code;
  tBTA_HL_DCH_CFG cfg_rsp;
} tBTA_HL_DCH_CREATE_RSP_PARAM;

typedef struct {
  uint16_t data_type;
  uint8_t mdep_id;
  tBTA_HL_MDEP_ROLE mdep_role;
  char mdep_desp[BTA_HL_MDEP_DESP_LEN + 1];
} tBTA_HL_SDP_MDEP_CFG;

typedef struct {
  uint16_t ctrl_psm;
  uint16_t data_psm;
  uint8_t mcap_sup_proc;
  uint8_t num_mdeps; /* number of mdep elements from SDP*/
  char srv_name[BTA_SERVICE_NAME_LEN + 1];
  char srv_desp[BTA_SERVICE_DESP_LEN + 1];
  char provider_name[BTA_PROVIDER_NAME_LEN + 1];
  tBTA_HL_SDP_MDEP_CFG mdep_cfg[BTA_HL_NUM_SDP_MDEPS];
} tBTA_HL_SDP_REC;

typedef struct {
  uint8_t num_recs;
  tBTA_HL_SDP_REC sdp_rec[BTA_HL_NUM_SDP_RECS];
} tBTA_HL_SDP;

/* HL control callback function events */
enum { BTA_HL_CTRL_ENABLE_CFM_EVT = 0, BTA_HL_CTRL_DISABLE_CFM_EVT };
typedef uint8_t tBTA_HL_CTRL_EVT;
/* Structure associated with BTA_HL_ENABLE_EVT
   BTA_HL_DISABLE_EVT */

typedef struct { tBTA_HL_STATUS status; } tBTA_HL_CTRL_ENABLE_DISABLE;

typedef union {
  tBTA_HL_CTRL_ENABLE_DISABLE enable_cfm;
  tBTA_HL_CTRL_ENABLE_DISABLE disable_cfm;
} tBTA_HL_CTRL;

/* HL instance callback function events */
enum {
  BTA_HL_REGISTER_CFM_EVT = 0,
  BTA_HL_DEREGISTER_CFM_EVT,
  BTA_HL_CCH_OPEN_IND_EVT,
  BTA_HL_CCH_OPEN_CFM_EVT,
  BTA_HL_CCH_CLOSE_IND_EVT,
  BTA_HL_CCH_CLOSE_CFM_EVT,
  BTA_HL_DCH_CREATE_IND_EVT,
  BTA_HL_DCH_OPEN_IND_EVT,
  BTA_HL_DCH_OPEN_CFM_EVT,
  BTA_HL_DCH_CLOSE_IND_EVT,
  BTA_HL_DCH_CLOSE_CFM_EVT,
  BTA_HL_DCH_RECONNECT_IND_EVT,
  BTA_HL_DCH_RECONNECT_CFM_EVT,

  BTA_HL_DCH_ABORT_IND_EVT,
  BTA_HL_DCH_ABORT_CFM_EVT,
  BTA_HL_DELETE_MDL_IND_EVT,
  BTA_HL_DELETE_MDL_CFM_EVT,
  BTA_HL_DCH_SEND_DATA_CFM_EVT,
  BTA_HL_DCH_RCV_DATA_IND_EVT,
  BTA_HL_CONG_CHG_IND_EVT,
  BTA_HL_DCH_ECHO_TEST_CFM_EVT,
  BTA_HL_SDP_QUERY_CFM_EVT,
  BTA_HL_SDP_INFO_IND_EVT
};
typedef uint8_t tBTA_HL_EVT;

typedef struct {
  tBTA_HL_STATUS status; /* start status */
  uint8_t app_id;
  tBTA_HL_APP_HANDLE app_handle;
} tBTA_HL_REGISTER_CFM;

typedef struct {
  tBTA_HL_STATUS status; /* start status */
  uint8_t app_id;
  tBTA_HL_APP_HANDLE app_handle;
} tBTA_HL_DEREGISTER_CFM;

typedef struct {
  bool intentional;
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
} tBTA_HL_CCH_CLOSE_IND;

typedef struct {
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
} tBTA_HL_MCL_IND;

typedef struct {
  tBTA_HL_STATUS status; /* connection status */
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
} tBTA_HL_MCL_CFM;

typedef struct {
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
  BD_ADDR bd_addr; /* address of peer device */
} tBTA_HL_CCH_OPEN_IND;

typedef struct {
  tBTA_HL_STATUS status; /* connection status */
  uint8_t app_id;
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
  BD_ADDR bd_addr; /* address of peer device */
} tBTA_HL_CCH_OPEN_CFM;

typedef struct {
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
  tBTA_HL_MDEP_ID local_mdep_id;
  tBTA_HL_MDL_ID mdl_id; /* MCAP data link ID for this
                            data channel conenction    */
  tBTA_HL_DCH_CFG cfg;   /* dch cfg requested by the peer device */
  BD_ADDR bd_addr;       /* address of peer device */

} tBTA_HL_DCH_CREATE_IND;

typedef struct {
  tBTA_HL_MDL_HANDLE mdl_handle;
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
  tBTA_HL_MDEP_ID local_mdep_id;
  tBTA_HL_MDL_ID mdl_id;     /* MCAP data link ID for this
                                data channel conenction    */
  tBTA_HL_DCH_MODE dch_mode; /* data channel mode - reliable or streaming*/

  bool first_reliable; /* whether this is the first reliable data channel */
  uint16_t mtu;
} tBTA_HL_DCH_OPEN_IND;

typedef struct {
  tBTA_HL_STATUS status; /* connection status */
  tBTA_HL_MDL_HANDLE mdl_handle;
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
  tBTA_HL_MDEP_ID local_mdep_id;
  tBTA_HL_MDL_ID mdl_id;     /* MCAP data link ID for this
                                data channel conenction    */
  tBTA_HL_DCH_MODE dch_mode; /* data channel mode - reliable or streaming*/
  bool first_reliable; /* whether this is the first reliable data channel */
  uint16_t mtu;
} tBTA_HL_DCH_OPEN_CFM;

typedef struct {
  bool intentional;
  tBTA_HL_MDL_HANDLE mdl_handle;
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
} tBTA_HL_DCH_CLOSE_IND;

typedef struct {
  tBTA_HL_MDL_HANDLE mdl_handle;
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
} tBTA_HL_MDL_IND;

typedef struct {
  tBTA_HL_STATUS status;
  tBTA_HL_MDL_HANDLE mdl_handle;
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
} tBTA_HL_MDL_CFM;

typedef struct {
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
  tBTA_HL_MDL_ID mdl_id;
} tBTA_HL_DELETE_MDL_IND;

typedef struct {
  tBTA_HL_STATUS status;
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
  tBTA_HL_MDL_ID mdl_id;
} tBTA_HL_DELETE_MDL_CFM;

typedef struct {
  tBTA_HL_MDL_HANDLE mdl_handle;
  tBTA_HL_MCL_HANDLE mcl_handle;
  tBTA_HL_APP_HANDLE app_handle;
  bool cong;
} tBTA_HL_DCH_CONG_IND;

typedef struct {
  tBTA_HL_APP_HANDLE app_handle;
  uint16_t ctrl_psm;
  uint16_t data_psm;
  uint8_t data_x_spec;
  uint8_t mcap_sup_procs;
} tBTA_HL_SDP_INFO_IND;

typedef struct {
  tBTA_HL_STATUS status;
  uint8_t app_id;
  tBTA_HL_APP_HANDLE app_handle;
  BD_ADDR bd_addr;
  tBTA_HL_SDP* p_sdp;
} tBTA_HL_SDP_QUERY_CFM;

typedef union {
  tBTA_HL_REGISTER_CFM reg_cfm;
  tBTA_HL_DEREGISTER_CFM dereg_cfm;
  tBTA_HL_CCH_OPEN_IND cch_open_ind;
  tBTA_HL_CCH_OPEN_CFM cch_open_cfm;
  tBTA_HL_CCH_CLOSE_IND cch_close_ind;
  tBTA_HL_MCL_CFM cch_close_cfm;
  tBTA_HL_DCH_CREATE_IND dch_create_ind;
  tBTA_HL_DCH_OPEN_IND dch_open_ind;
  tBTA_HL_DCH_OPEN_CFM dch_open_cfm;
  tBTA_HL_DCH_CLOSE_IND dch_close_ind;
  tBTA_HL_MDL_CFM dch_close_cfm;
  tBTA_HL_DCH_OPEN_IND dch_reconnect_ind;
  tBTA_HL_DCH_OPEN_CFM dch_reconnect_cfm;
  tBTA_HL_MCL_IND dch_abort_ind;
  tBTA_HL_MCL_CFM dch_abort_cfm;
  tBTA_HL_DELETE_MDL_IND delete_mdl_ind;
  tBTA_HL_DELETE_MDL_CFM delete_mdl_cfm;
  tBTA_HL_MDL_CFM dch_send_data_cfm;
  tBTA_HL_MDL_IND dch_rcv_data_ind;
  tBTA_HL_DCH_CONG_IND dch_cong_ind;
  tBTA_HL_MCL_CFM echo_test_cfm;
  tBTA_HL_SDP_QUERY_CFM sdp_query_cfm;
  tBTA_HL_SDP_INFO_IND sdp_info_ind;

} tBTA_HL;

/* HL callback functions */
typedef void tBTA_HL_CTRL_CBACK(tBTA_HL_CTRL_EVT event, tBTA_HL_CTRL* p_data);
typedef void tBTA_HL_CBACK(tBTA_HL_EVT event, tBTA_HL* p_data);

/*****************************************************************************
 *  External Function Declarations
 ****************************************************************************/

/**************************
 *  API Functions
 **************************/

/*******************************************************************************
 *
 * Function         BTA_HlEnable
 *
 * Description      Enable the HL subsystems.  This function must be
 *                  called before any other functions in the HL API are called.
 *                  When the enable operation is completed the callback function
 *                  will be called with an BTA_HL_CTRL_ENABLE_CFM_EVT event.
 *
 * Parameters       p_cback - HL event call back function
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlEnable(tBTA_HL_CTRL_CBACK* p_ctrl_cback);
/*******************************************************************************
 *
 * Function         BTA_HlDisable
 *
 * Description     Disable the HL subsystem.
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlDisable(void);

/*******************************************************************************
 *
 * Function         BTA_HlUpdate
 *
 * Description      Register an HDP application
 *
 * Parameters       app_id        - Application ID
 *                  p_reg_param   - non-platform related parameters for the
 *                                  HDP application
 *                  p_cback       - HL event callback fucntion
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlUpdate(uint8_t app_id, tBTA_HL_REG_PARAM* p_reg_param,
                         bool is_register, tBTA_HL_CBACK* p_cback);

/*******************************************************************************
 *
 * Function         BTA_HlRegister
 *
 * Description      Register a HDP application
 *
 *
 * Parameters       app_id        - hdp application ID
 *                  p_reg_param   - non-platform related parameters for the
 *                                  HDP application
 *                  p_cback       - HL event callback fucntion
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlRegister(uint8_t app_id, tBTA_HL_REG_PARAM* p_reg_param,
                           tBTA_HL_CBACK* p_cback);

/*******************************************************************************
 *
 * Function         BTA_HlDeregister
 *
 * Description      Deregister an HDP application
 *
 * Parameters       app_handle - Application handle
 *
 * Returns         void
 *
 ******************************************************************************/
extern void BTA_HlDeregister(uint8_t app_id, tBTA_HL_APP_HANDLE app_handle);

/*******************************************************************************
 *
 * Function         BTA_HlCchOpen
 *
 * Description      Open a Control channel connection with the specified BD
 *                  address and the control PSM value is used to select which
 *                  HDP insatnce should be used in case the peer device support
 *                  multiple HDP instances.
 *
 *
 * Parameters       app_handle - Application Handle
 *                  p_open_param - parameters for opening a control channel
 *
 * Returns          void
 *
 *                  Note: If the control PSM value is zero then the first HDP
 *                        instance is used for the control channel setup
 ******************************************************************************/
extern void BTA_HlCchOpen(uint8_t app_id, tBTA_HL_APP_HANDLE app_handle,
                          tBTA_HL_CCH_OPEN_PARAM* p_open_param);

/*******************************************************************************
 *
 * Function         BTA_HlCchClose
 *
 * Description      Close a Control channel connection with the specified MCL
 *                  handle
 *
 * Parameters       mcl_handle - MCL handle
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlCchClose(tBTA_HL_MCL_HANDLE mcl_handle);

/*******************************************************************************
 *
 * Function         BTA_HlDchOpen
 *
 * Description      Open a data channel connection with the specified DCH
 *                  parameters
 *
 * Parameters       mcl_handle - MCL handle
 *                  p_open_param - parameters for opening a data channel
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlDchOpen(tBTA_HL_MCL_HANDLE mcl_handle,
                          tBTA_HL_DCH_OPEN_PARAM* p_open_param);
/*******************************************************************************
 *
 * Function         BTA_HlDchReconnect
 *
 * Description      Reconnect a data channel with the specified MDL_ID
 *
 * Parameters       mcl_handle      - MCL handle
*8                  p_recon_param   - parameters for reconnecting a data channel
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlDchReconnect(tBTA_HL_MCL_HANDLE mcl_handle,
                               tBTA_HL_DCH_RECONNECT_PARAM* p_recon_param);
/*******************************************************************************
 *
 * Function         BTA_HlDchClose
 *
 * Description      Close a data channel with the specified MDL handle
 *
 * Parameters       mdl_handle  - MDL handle
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlDchClose(tBTA_HL_MDL_HANDLE mdl_handle);

/*******************************************************************************
 *
 * Function         BTA_HlDchAbort
 *
 * Description      Abort the current data channel setup with the specified MCL
 *                  handle
 *
 * Parameters       mcl_handle  - MCL handle
 *
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlDchAbort(tBTA_HL_MCL_HANDLE mcl_handle);

/*******************************************************************************
 *
 * Function         BTA_HlSendData
 *
 * Description      Send an APDU to the peer device
 *
 * Parameters       mdl_handle  - MDL handle
 *                  pkt_size    - size of the data packet to be sent
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlSendData(tBTA_HL_MDL_HANDLE mdl_handle, uint16_t pkt_size);

/*******************************************************************************
 *
 * Function         BTA_HlDeleteMdl
 *
 * Description      Delete the specified MDL_ID within the specified MCL handle
 *
 * Parameters       mcl_handle  - MCL handle
 *                  mdl_id      - MDL ID
 *
 * Returns          void
 *
 *                  note: If mdl_id = 0xFFFF then this means to delete all MDLs
 *                        and this value can only be used with DeleteMdl request
 *                        only not other requests
 *
 ******************************************************************************/
extern void BTA_HlDeleteMdl(tBTA_HL_MCL_HANDLE mcl_handle,
                            tBTA_HL_MDL_ID mdl_id);

/*******************************************************************************
 *
 * Function         BTA_HlDchEchoTest
 *
 * Description      Initiate an echo test with the specified MCL handle
 *
 * Parameters       mcl_handle           - MCL handle
*8                  p_echo_test_param   -  parameters for echo testing
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlDchEchoTest(tBTA_HL_MCL_HANDLE mcl_handle,
                              tBTA_HL_DCH_ECHO_TEST_PARAM* p_echo_test_param);

/*******************************************************************************
 *
 * Function         BTA_HlSdpQuery
 *
 * Description      SDP query request for the specified BD address
 *
 * Parameters       app_id
                        app_handle      - application handle
 *                  bd_addr         - BD address
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlSdpQuery(uint8_t app_id, tBTA_HL_APP_HANDLE app_handle,
                           BD_ADDR bd_addr);

/*******************************************************************************
 *
 * Function         BTA_HlDchCreateMdlRsp
 *
 * Description      Set the Response and configuration values for the Create MDL
 *                  request
 *
 * Parameters       mcl_handle  - MCL handle
 *                  p_rsp_param - parameters specified whether the request
 *                                should be accepted or not and if it should be
 *                                accepted then it also specified the
 *                                configuration response value
 *
 * Returns          void
 *
 ******************************************************************************/
extern void BTA_HlDchCreateRsp(tBTA_HL_MCL_HANDLE mcl_handle,
                               tBTA_HL_DCH_CREATE_RSP_PARAM* p_rsp_param);

#endif /* BTA_HL_API_H */