/******************************************************************************
 *
 *  Copyright 1999-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  this file contains functions that handle the database
 *
 ******************************************************************************/

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "bt_target.h"

#include "bt_common.h"

#include "hcidefs.h"
#include "hcimsgs.h"
#include "l2cdefs.h"

#include "sdp_api.h"
#include "sdpint.h"

#if (SDP_SERVER_ENABLED == TRUE)
/******************************************************************************/
/*            L O C A L    F U N C T I O N     P R O T O T Y P E S            */
/******************************************************************************/
static bool find_uuid_in_seq(uint8_t* p, uint32_t seq_len, uint8_t* p_his_uuid,
                             uint16_t his_len, int nest_level);

/*******************************************************************************
 *
 * Function         sdp_db_service_search
 *
 * Description      This function searches for a record that contains the
 *                  specified UIDs. It is passed either NULL to start at the
 *                  beginning, or the previous record found.
 *
 * Returns          Pointer to the record, or NULL if not found.
 *
 ******************************************************************************/
tSDP_RECORD* sdp_db_service_search(tSDP_RECORD* p_rec, tSDP_UUID_SEQ* p_seq) {
  uint16_t xx, yy;
  tSDP_ATTRIBUTE* p_attr;
  tSDP_RECORD* p_end = &sdp_cb.server_db.record[sdp_cb.server_db.num_records];

  /* If NULL, start at the beginning, else start at the first specified record
   */
  if (!p_rec)
    p_rec = &sdp_cb.server_db.record[0];
  else
    p_rec++;

  /* Look through the records. The spec says that a match occurs if */
  /* the record contains all the passed UUIDs in it.                */
  for (; p_rec < p_end; p_rec++) {
    for (yy = 0; yy < p_seq->num_uids; yy++) {
      p_attr = &p_rec->attribute[0];
      for (xx = 0; xx < p_rec->num_attributes; xx++, p_attr++) {
        if (p_attr->type == UUID_DESC_TYPE) {
          if (sdpu_compare_uuid_arrays(p_attr->value_ptr, p_attr->len,
                                       &p_seq->uuid_entry[yy].value[0],
                                       p_seq->uuid_entry[yy].len))
            break;
        } else if (p_attr->type == DATA_ELE_SEQ_DESC_TYPE) {
          if (find_uuid_in_seq(p_attr->value_ptr, p_attr->len,
                               &p_seq->uuid_entry[yy].value[0],
                               p_seq->uuid_entry[yy].len, 0))
            break;
        }
      }
      /* If any UUID was not found,  on to the next record */
      if (xx == p_rec->num_attributes) break;
    }

    /* If every UUID was found in the record, return the record */
    if (yy == p_seq->num_uids) return (p_rec);
  }

  /* If here, no more records found */
  return (NULL);
}

/*******************************************************************************
 *
 * Function         find_uuid_in_seq
 *
 * Description      This function searches a data element sequenct for a UUID.
 *
 * Returns          true if found, else false
 *
 ******************************************************************************/
static bool find_uuid_in_seq(uint8_t* p, uint32_t seq_len, uint8_t* p_uuid,
                             uint16_t uuid_len, int nest_level) {
  uint8_t* p_end = p + seq_len;
  uint8_t type;
  uint32_t len;

  /* A little safety check to avoid excessive recursion */
  if (nest_level > 3) return (false);

  while (p < p_end) {
    type = *p++;
    p = sdpu_get_len_from_type(p, p_end, type, &len);
    if (p == NULL || (p + len) > p_end) {
      SDP_TRACE_WARNING("%s: bad length", __func__);
      break;
    }
    type = type >> 3;
    if (type == UUID_DESC_TYPE) {
      if (sdpu_compare_uuid_arrays(p, len, p_uuid, uuid_len)) return (true);
    } else if (type == DATA_ELE_SEQ_DESC_TYPE) {
      if (find_uuid_in_seq(p, len, p_uuid, uuid_len, nest_level + 1))
        return (true);
    }
    p = p + len;
  }

  /* If here, failed to match */
  return (false);
}

/*******************************************************************************
 *
 * Function         sdp_db_find_record
 *
 * Description      This function searches for a record with a specific handle
 *                  It is passed the handle of the record.
 *
 * Returns          Pointer to the record, or NULL if not found.
 *
 ******************************************************************************/
tSDP_RECORD* sdp_db_find_record(uint32_t handle) {
  tSDP_RECORD* p_rec;
  tSDP_RECORD* p_end = &sdp_cb.server_db.record[sdp_cb.server_db.num_records];

  /* Look through the records for the caller's handle */
  for (p_rec = &sdp_cb.server_db.record[0]; p_rec < p_end; p_rec++) {
    if (p_rec->record_handle == handle) return (p_rec);
  }

  /* Record with that handle not found. */
  return (NULL);
}

/*******************************************************************************
 *
 * Function         sdp_db_find_attr_in_rec
 *
 * Description      This function searches a record for specific attributes.
 *                  It is passed a pointer to the record. If the record contains
 *                  the specified attribute, (the caller may specify be a range
 *                  of attributes), the attribute is returned.
 *
 * Returns          Pointer to the attribute, or NULL if not found.
 *
 ******************************************************************************/
tSDP_ATTRIBUTE* sdp_db_find_attr_in_rec(tSDP_RECORD* p_rec, uint16_t start_attr,
                                        uint16_t end_attr) {
  tSDP_ATTRIBUTE* p_at;
  uint16_t xx;

  /* Note that the attributes in a record are assumed to be in sorted order */
  for (xx = 0, p_at = &p_rec->attribute[0]; xx < p_rec->num_attributes;
       xx++, p_at++) {
    if ((p_at->id >= start_attr) && (p_at->id <= end_attr)) return (p_at);
  }

  /* No matching attribute found */
  return (NULL);
}

/*******************************************************************************
 *
 * Function         sdp_compose_proto_list
 *
 * Description      This function is called to compose a data sequence from
 *                  protocol element list struct pointer
 *
 * Returns          the length of the data sequence
 *
 ******************************************************************************/
static int sdp_compose_proto_list(uint8_t* p, uint16_t num_elem,
                                  tSDP_PROTOCOL_ELEM* p_elem_list) {
  uint16_t xx, yy, len;
  bool is_rfcomm_scn;
  uint8_t* p_head = p;
  uint8_t* p_len;

  /* First, build the protocol list. This consists of a set of data element
  ** sequences, one for each layer. Each layer sequence consists of layer's
  ** UUID and optional parameters
  */
  for (xx = 0; xx < num_elem; xx++, p_elem_list++) {
    len = 3 + (p_elem_list->num_params * 3);
    UINT8_TO_BE_STREAM(p, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);

    p_len = p;
    *p++ = (uint8_t)len;

    UINT8_TO_BE_STREAM(p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
    UINT16_TO_BE_STREAM(p, p_elem_list->protocol_uuid);

    if (p_elem_list->protocol_uuid == UUID_PROTOCOL_RFCOMM)
      is_rfcomm_scn = true;
    else
      is_rfcomm_scn = false;

    for (yy = 0; yy < p_elem_list->num_params; yy++) {
      if (is_rfcomm_scn) {
        UINT8_TO_BE_STREAM(p, (UINT_DESC_TYPE << 3) | SIZE_ONE_BYTE);
        UINT8_TO_BE_STREAM(p, p_elem_list->params[yy]);

        *p_len -= 1;
      } else {
        UINT8_TO_BE_STREAM(p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
        UINT16_TO_BE_STREAM(p, p_elem_list->params[yy]);
      }
    }
  }
  return (p - p_head);
}

#endif /* SDP_SERVER_ENABLED == TRUE */

/*******************************************************************************
 *
 * Function         SDP_CreateRecord
 *
 * Description      This function is called to create a record in the database.
 *                  This would be through the SDP database maintenance API. The
 *                  record is created empty, teh application should then call
 *                  "add_attribute" to add the record's attributes.
 *
 * Returns          Record handle if OK, else 0.
 *
 ******************************************************************************/
uint32_t SDP_CreateRecord(void) {
#if (SDP_SERVER_ENABLED == TRUE)
  uint32_t handle;
  uint8_t buf[4];
  tSDP_DB* p_db = &sdp_cb.server_db;

  /* First, check if there is a free record */
  if (p_db->num_records < SDP_MAX_RECORDS) {
    memset(&p_db->record[p_db->num_records], 0, sizeof(tSDP_RECORD));

    /* We will use a handle of the first unreserved handle plus last record
    ** number + 1 */
    if (p_db->num_records)
      handle = p_db->record[p_db->num_records - 1].record_handle + 1;
    else
      handle = 0x10000;

    p_db->record[p_db->num_records].record_handle = handle;

    p_db->num_records++;
    SDP_TRACE_DEBUG("SDP_CreateRecord ok, num_records:%d", p_db->num_records);
    /* Add the first attribute (the handle) automatically */
    UINT32_TO_BE_FIELD(buf, handle);
    SDP_AddAttribute(handle, ATTR_ID_SERVICE_RECORD_HDL, UINT_DESC_TYPE, 4,
                     buf);

    return (p_db->record[p_db->num_records - 1].record_handle);
  } else
    SDP_TRACE_ERROR("SDP_CreateRecord fail, exceed maximum records:%d",
                    SDP_MAX_RECORDS);
#endif
  return (0);
}

/*******************************************************************************
 *
 * Function         SDP_DeleteRecord
 *
 * Description      This function is called to add a record (or all records)
 *                  from the database. This would be through the SDP database
 *                  maintenance API.
 *
 *                  If a record handle of 0 is passed, all records are deleted.
 *
 * Returns          true if succeeded, else false
 *
 ******************************************************************************/
bool SDP_DeleteRecord(uint32_t handle) {
#if (SDP_SERVER_ENABLED == TRUE)
  uint16_t xx, yy, zz;
  tSDP_RECORD* p_rec = &sdp_cb.server_db.record[0];

  if (handle == 0 || sdp_cb.server_db.num_records == 0) {
    /* Delete all records in the database */
    sdp_cb.server_db.num_records = 0;

    /* require new DI record to be created in SDP_SetLocalDiRecord */
    sdp_cb.server_db.di_primary_handle = 0;

    return (true);
  } else {
    /* Find the record in the database */
    for (xx = 0; xx < sdp_cb.server_db.num_records; xx++, p_rec++) {
      if (p_rec->record_handle == handle) {
        /* Found it. Shift everything up one */
        for (yy = xx; yy < sdp_cb.server_db.num_records - 1; yy++, p_rec++) {
          *p_rec = *(p_rec + 1);

          /* Adjust the attribute value pointer for each attribute */
          for (zz = 0; zz < p_rec->num_attributes; zz++)
            p_rec->attribute[zz].value_ptr -= sizeof(tSDP_RECORD);
        }

        sdp_cb.server_db.num_records--;

        SDP_TRACE_DEBUG("SDP_DeleteRecord ok, num_records:%d",
                        sdp_cb.server_db.num_records);
        /* if we're deleting the primary DI record, clear the */
        /* value in the control block */
        if (sdp_cb.server_db.di_primary_handle == handle) {
          sdp_cb.server_db.di_primary_handle = 0;
        }

        return (true);
      }
    }
  }
#endif
  return (false);
}

/*******************************************************************************
 *
 * Function         SDP_AddAttribute
 *
 * Description      This function is called to add an attribute to a record.
 *                  This would be through the SDP database maintenance API.
 *                  If the attribute already exists in the record, it is
 *                  replaced with the new value.
 *
 * NOTE             Attribute values must be passed as a Big Endian stream.
 *
 * Returns          true if added OK, else false
 *
 ******************************************************************************/
bool SDP_AddAttribute(uint32_t handle, uint16_t attr_id, uint8_t attr_type,
                      uint32_t attr_len, uint8_t* p_val) {
#if (SDP_SERVER_ENABLED == TRUE)
  uint16_t xx, yy, zz;
  tSDP_RECORD* p_rec = &sdp_cb.server_db.record[0];

  if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) {
    if ((attr_type == UINT_DESC_TYPE) ||
        (attr_type == TWO_COMP_INT_DESC_TYPE) ||
        (attr_type == UUID_DESC_TYPE) ||
        (attr_type == DATA_ELE_SEQ_DESC_TYPE) ||
        (attr_type == DATA_ELE_ALT_DESC_TYPE)) {
      uint8_t num_array[400];
      uint32_t len = (attr_len > 200) ? 200 : attr_len;

      num_array[0] = '\0';
      for (uint32_t i = 0; i < len; i++) {
        snprintf((char*)&num_array[i * 2], sizeof(num_array) - i * 2, "%02X",
                 (uint8_t)(p_val[i]));
      }
      SDP_TRACE_DEBUG(
          "SDP_AddAttribute: handle:%X, id:%04X, type:%d, len:%d, p_val:%p, "
          "*p_val:%s",
          handle, attr_id, attr_type, attr_len, p_val, num_array);
    } else if (attr_type == BOOLEAN_DESC_TYPE) {
      SDP_TRACE_DEBUG(
          "SDP_AddAttribute: handle:%X, id:%04X, type:%d, len:%d, p_val:%p, "
          "*p_val:%d",
          handle, attr_id, attr_type, attr_len, p_val, *p_val);
    } else {
      SDP_TRACE_DEBUG(
          "SDP_AddAttribute: handle:%X, id:%04X, type:%d, len:%d, p_val:%p, "
          "*p_val:%s",
          handle, attr_id, attr_type, attr_len, p_val, p_val);
    }
  }

  /* Find the record in the database */
  for (zz = 0; zz < sdp_cb.server_db.num_records; zz++, p_rec++) {
    if (p_rec->record_handle == handle) {
      tSDP_ATTRIBUTE* p_attr = &p_rec->attribute[0];

      /* Found the record. Now, see if the attribute already exists */
      for (xx = 0; xx < p_rec->num_attributes; xx++, p_attr++) {
        /* The attribute exists. replace it */
        if (p_attr->id == attr_id) {
          SDP_DeleteAttribute(handle, attr_id);
          break;
        }
        if (p_attr->id > attr_id) break;
      }

      if (p_rec->num_attributes == SDP_MAX_REC_ATTR) return (false);

      /* If not found, see if we can allocate a new entry */
      if (xx == p_rec->num_attributes)
        p_attr = &p_rec->attribute[p_rec->num_attributes];
      else {
        /* Since the attributes are kept in sorted order, insert ours here */
        for (yy = p_rec->num_attributes; yy > xx; yy--)
          p_rec->attribute[yy] = p_rec->attribute[yy - 1];
      }

      p_attr->id = attr_id;
      p_attr->type = attr_type;
      p_attr->len = attr_len;

      if (p_rec->free_pad_ptr + attr_len >= SDP_MAX_PAD_LEN) {
        /* do truncate only for text string type descriptor */
        if (attr_type == TEXT_STR_DESC_TYPE) {
          SDP_TRACE_WARNING(
              "SDP_AddAttribute: attr_len:%d too long. truncate to (%d)",
              attr_len, SDP_MAX_PAD_LEN - p_rec->free_pad_ptr);

          attr_len = SDP_MAX_PAD_LEN - p_rec->free_pad_ptr;
          p_val[SDP_MAX_PAD_LEN - p_rec->free_pad_ptr] = '\0';
          p_val[SDP_MAX_PAD_LEN - p_rec->free_pad_ptr + 1] = '\0';
        } else
          attr_len = 0;
      }

      if ((attr_len > 0) && (p_val != 0)) {
        p_attr->len = attr_len;
        memcpy(&p_rec->attr_pad[p_rec->free_pad_ptr], p_val, (size_t)attr_len);
        p_attr->value_ptr = &p_rec->attr_pad[p_rec->free_pad_ptr];
        p_rec->free_pad_ptr += attr_len;
      } else if ((attr_len == 0 &&
                  p_attr->len !=
                      0) || /* if truncate to 0 length, simply don't add */
                 p_val == 0) {
        SDP_TRACE_ERROR(
            "SDP_AddAttribute fail, length exceed maximum: ID %d: attr_len:%d ",
            attr_id, attr_len);
        p_attr->id = p_attr->type = p_attr->len = 0;
        return (false);
      }
      p_rec->num_attributes++;
      return (true);
    }
  }
#endif
  return (false);
}

/*******************************************************************************
 *
 * Function         SDP_AddSequence
 *
 * Description      This function is called to add a sequence to a record.
 *                  This would be through the SDP database maintenance API.
 *                  If the sequence already exists in the record, it is replaced
 *                  with the new sequence.
 *
 * NOTE             Element values must be passed as a Big Endian stream.
 *
 * Returns          true if added OK, else false
 *
 ******************************************************************************/
bool SDP_AddSequence(uint32_t handle, uint16_t attr_id, uint16_t num_elem,
                     uint8_t type[], uint8_t len[], uint8_t* p_val[]) {
#if (SDP_SERVER_ENABLED == TRUE)
  uint16_t xx;
  uint8_t* p;
  uint8_t* p_head;
  bool result;
  uint8_t* p_buff =
      (uint8_t*)osi_malloc(sizeof(uint8_t) * SDP_MAX_ATTR_LEN * 2);

  p = p_buff;

  /* First, build the sequence */
  for (xx = 0; xx < num_elem; xx++) {
    p_head = p;
    switch (len[xx]) {
      case 1:
        UINT8_TO_BE_STREAM(p, (type[xx] << 3) | SIZE_ONE_BYTE);
        break;
      case 2:
        UINT8_TO_BE_STREAM(p, (type[xx] << 3) | SIZE_TWO_BYTES);
        break;
      case 4:
        UINT8_TO_BE_STREAM(p, (type[xx] << 3) | SIZE_FOUR_BYTES);
        break;
      case 8:
        UINT8_TO_BE_STREAM(p, (type[xx] << 3) | SIZE_EIGHT_BYTES);
        break;
      case 16:
        UINT8_TO_BE_STREAM(p, (type[xx] << 3) | SIZE_SIXTEEN_BYTES);
        break;
      default:
        UINT8_TO_BE_STREAM(p, (type[xx] << 3) | SIZE_IN_NEXT_BYTE);
        UINT8_TO_BE_STREAM(p, len[xx]);
        break;
    }

    ARRAY_TO_BE_STREAM(p, p_val[xx], len[xx]);

    if (p - p_buff > SDP_MAX_ATTR_LEN) {
      /* go back to before we add this element */
      p = p_head;
      if (p_head == p_buff) {
        /* the first element exceed the max length */
        SDP_TRACE_ERROR("SDP_AddSequence - too long(attribute is not added)!!");
        osi_free(p_buff);
        return false;
      } else
        SDP_TRACE_ERROR("SDP_AddSequence - too long, add %d elements of %d", xx,
                        num_elem);
      break;
    }
  }
  result = SDP_AddAttribute(handle, attr_id, DATA_ELE_SEQ_DESC_TYPE,
                            (uint32_t)(p - p_buff), p_buff);
  osi_free(p_buff);
  return result;
#else /* SDP_SERVER_ENABLED == FALSE */
  return (false);
#endif
}

/*******************************************************************************
 *
 * Function         SDP_AddUuidSequence
 *
 * Description      This function is called to add a UUID sequence to a record.
 *                  This would be through the SDP database maintenance API.
 *                  If the sequence already exists in the record, it is replaced
 *                  with the new sequence.
 *
 * Returns          true if added OK, else false
 *
 ******************************************************************************/
bool SDP_AddUuidSequence(uint32_t handle, uint16_t attr_id, uint16_t num_uuids,
                         uint16_t* p_uuids) {
#if (SDP_SERVER_ENABLED == TRUE)
  uint16_t xx;
  uint8_t* p;
  int32_t max_len = SDP_MAX_ATTR_LEN - 3;
  bool result;
  uint8_t* p_buff =
      (uint8_t*)osi_malloc(sizeof(uint8_t) * SDP_MAX_ATTR_LEN * 2);

  p = p_buff;

  /* First, build the sequence */
  for (xx = 0; xx < num_uuids; xx++, p_uuids++) {
    UINT8_TO_BE_STREAM(p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
    UINT16_TO_BE_STREAM(p, *p_uuids);

    if ((p - p_buff) > max_len) {
      SDP_TRACE_WARNING("SDP_AddUuidSequence - too long, add %d uuids of %d",
                        xx, num_uuids);
      break;
    }
  }

  result = SDP_AddAttribute(handle, attr_id, DATA_ELE_SEQ_DESC_TYPE,
                            (uint32_t)(p - p_buff), p_buff);
  osi_free(p_buff);
  return result;
#else /* SDP_SERVER_ENABLED == FALSE */
  return (false);
#endif
}

/*******************************************************************************
 *
 * Function         SDP_AddProtocolList
 *
 * Description      This function is called to add a protocol descriptor list to
 *                  a record. This would be through the SDP database
 *                  maintenance API. If the protocol list already exists in the
 *                  record, it is replaced with the new list.
 *
 * Returns          true if added OK, else false
 *
 ******************************************************************************/
bool SDP_AddProtocolList(uint32_t handle, uint16_t num_elem,
                         tSDP_PROTOCOL_ELEM* p_elem_list) {
#if (SDP_SERVER_ENABLED == TRUE)
  int offset;
  bool result;
  uint8_t* p_buff =
      (uint8_t*)osi_malloc(sizeof(uint8_t) * SDP_MAX_ATTR_LEN * 2);

  offset = sdp_compose_proto_list(p_buff, num_elem, p_elem_list);
  result = SDP_AddAttribute(handle, ATTR_ID_PROTOCOL_DESC_LIST,
                            DATA_ELE_SEQ_DESC_TYPE, (uint32_t)offset, p_buff);
  osi_free(p_buff);
  return result;
#else /* SDP_SERVER_ENABLED == FALSE */
  return (false);
#endif
}

/*******************************************************************************
 *
 * Function         SDP_AddAdditionProtoLists
 *
 * Description      This function is called to add a protocol descriptor list to
 *                  a record. This would be through the SDP database maintenance
 *                  API. If the protocol list already exists in the record, it
 *                  is replaced with the new list.
 *
 * Returns          true if added OK, else false
 *
 ******************************************************************************/
bool SDP_AddAdditionProtoLists(uint32_t handle, uint16_t num_elem,
                               tSDP_PROTO_LIST_ELEM* p_proto_list) {
#if (SDP_SERVER_ENABLED == TRUE)
  uint16_t xx;
  uint8_t* p;
  uint8_t* p_len;
  int offset;
  bool result;
  uint8_t* p_buff =
      (uint8_t*)osi_malloc(sizeof(uint8_t) * SDP_MAX_ATTR_LEN * 2);

  p = p_buff;

  /* for each ProtocolDescriptorList */
  for (xx = 0; xx < num_elem; xx++, p_proto_list++) {
    UINT8_TO_BE_STREAM(p, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
    p_len = p++;

    offset = sdp_compose_proto_list(p, p_proto_list->num_elems,
                                    p_proto_list->list_elem);
    p += offset;

    *p_len = (uint8_t)(p - p_len - 1);
  }
  result =
      SDP_AddAttribute(handle, ATTR_ID_ADDITION_PROTO_DESC_LISTS,
                       DATA_ELE_SEQ_DESC_TYPE, (uint32_t)(p - p_buff), p_buff);
  osi_free(p_buff);
  return result;

#else /* SDP_SERVER_ENABLED == FALSE */
  return (false);
#endif
}

/*******************************************************************************
 *
 * Function         SDP_AddProfileDescriptorList
 *
 * Description      This function is called to add a profile descriptor list to
 *                  a record. This would be through the SDP database maintenance
 *                  API. If the version already exists in the record, it is
 *                  replaced with the new one.
 *
 * Returns          true if added OK, else false
 *
 ******************************************************************************/
bool SDP_AddProfileDescriptorList(uint32_t handle, uint16_t profile_uuid,
                                  uint16_t version) {
#if (SDP_SERVER_ENABLED == TRUE)
  uint8_t* p;
  bool result;
  uint8_t* p_buff = (uint8_t*)osi_malloc(sizeof(uint8_t) * SDP_MAX_ATTR_LEN);

  p = p_buff + 2;

  /* First, build the profile descriptor list. This consists of a data element
   * sequence. */
  /* The sequence consists of profile's UUID and version number  */
  UINT8_TO_BE_STREAM(p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
  UINT16_TO_BE_STREAM(p, profile_uuid);

  UINT8_TO_BE_STREAM(p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
  UINT16_TO_BE_STREAM(p, version);

  /* Add in type and length fields */
  *p_buff = (uint8_t)((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
  *(p_buff + 1) = (uint8_t)(p - (p_buff + 2));

  result =
      SDP_AddAttribute(handle, ATTR_ID_BT_PROFILE_DESC_LIST,
                       DATA_ELE_SEQ_DESC_TYPE, (uint32_t)(p - p_buff), p_buff);
  osi_free(p_buff);
  return result;

#else /* SDP_SERVER_ENABLED == FALSE */
  return (false);
#endif
}

/*******************************************************************************
 *
 * Function         SDP_AddLanguageBaseAttrIDList
 *
 * Description      This function is called to add a language base attr list to
 *                  a record. This would be through the SDP database maintenance
 *                  API. If the version already exists in the record, it is
 *                  replaced with the new one.
 *
 * Returns          true if added OK, else false
 *
 ******************************************************************************/
bool SDP_AddLanguageBaseAttrIDList(uint32_t handle, uint16_t lang,
                                   uint16_t char_enc, uint16_t base_id) {
#if (SDP_SERVER_ENABLED == TRUE)
  uint8_t* p;
  bool result;
  uint8_t* p_buff = (uint8_t*)osi_malloc(sizeof(uint8_t) * SDP_MAX_ATTR_LEN);

  p = p_buff;

  /* First, build the language base descriptor list. This consists of a data */
  /* element sequence. The sequence consists of 9 bytes (3 UINt16 fields)    */
  UINT8_TO_BE_STREAM(p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
  UINT16_TO_BE_STREAM(p, lang);

  UINT8_TO_BE_STREAM(p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
  UINT16_TO_BE_STREAM(p, char_enc);

  UINT8_TO_BE_STREAM(p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
  UINT16_TO_BE_STREAM(p, base_id);

  result =
      SDP_AddAttribute(handle, ATTR_ID_LANGUAGE_BASE_ATTR_ID_LIST,
                       DATA_ELE_SEQ_DESC_TYPE, (uint32_t)(p - p_buff), p_buff);
  osi_free(p_buff);
  return result;
#else /* SDP_SERVER_ENABLED == FALSE */
  return (false);
#endif
}

/*******************************************************************************
 *
 * Function         SDP_AddServiceClassIdList
 *
 * Description      This function is called to add a service list to a record.
 *                  This would be through the SDP database maintenance API.
 *                  If the service list already exists in the record, it is
 *                  replaced with the new list.
 *
 * Returns          true if added OK, else false
 *
 ******************************************************************************/
bool SDP_AddServiceClassIdList(uint32_t handle, uint16_t num_services,
                               uint16_t* p_service_uuids) {
#if (SDP_SERVER_ENABLED == TRUE)
  uint16_t xx;
  uint8_t* p;
  bool result;
  uint8_t* p_buff =
      (uint8_t*)osi_malloc(sizeof(uint8_t) * SDP_MAX_ATTR_LEN * 2);

  p = p_buff;

  for (xx = 0; xx < num_services; xx++, p_service_uuids++) {
    UINT8_TO_BE_STREAM(p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
    UINT16_TO_BE_STREAM(p, *p_service_uuids);
  }

  result =
      SDP_AddAttribute(handle, ATTR_ID_SERVICE_CLASS_ID_LIST,
                       DATA_ELE_SEQ_DESC_TYPE, (uint32_t)(p - p_buff), p_buff);
  osi_free(p_buff);
  return result;
#else /* SDP_SERVER_ENABLED == FALSE */
  return (false);
#endif
}

/*******************************************************************************
 *
 * Function         SDP_DeleteAttribute
 *
 * Description      This function is called to delete an attribute from a
 *                  record. This would be through the SDP database maintenance
 *                  API.
 *
 * Returns          true if deleted OK, else false if not found
 *
 ******************************************************************************/
bool SDP_DeleteAttribute(uint32_t handle, uint16_t attr_id) {
#if (SDP_SERVER_ENABLED == TRUE)
  tSDP_RECORD* p_rec = &sdp_cb.server_db.record[0];
  uint8_t* pad_ptr;
  uint32_t len; /* Number of bytes in the entry */

  /* Find the record in the database */
  for (uint16_t xx = 0; xx < sdp_cb.server_db.num_records; xx++, p_rec++) {
    if (p_rec->record_handle == handle) {
      tSDP_ATTRIBUTE* p_attr = &p_rec->attribute[0];

      SDP_TRACE_API("Deleting attr_id 0x%04x for handle 0x%x", attr_id, handle);
      /* Found it. Now, find the attribute */
      for (uint16_t yy = 0; yy < p_rec->num_attributes; yy++, p_attr++) {
        if (p_attr->id == attr_id) {
          pad_ptr = p_attr->value_ptr;
          len = p_attr->len;

          if (len) {
            for (uint16_t zz = 0; zz < p_rec->num_attributes; zz++) {
              if (p_rec->attribute[zz].value_ptr > pad_ptr)
                p_rec->attribute[zz].value_ptr -= len;
            }
          }

          /* Found it. Shift everything up one */
          p_rec->num_attributes--;

          for (uint16_t zz = xx; zz < p_rec->num_attributes; zz++, p_attr++) {
            *p_attr = *(p_attr + 1);
          }

          /* adjust attribute values if needed */
          if (len) {
            xx =
                (p_rec->free_pad_ptr - ((pad_ptr + len) - &p_rec->attr_pad[0]));
            for (uint16_t zz = 0; zz < xx; zz++, pad_ptr++) {
              *pad_ptr = *(pad_ptr + len);
            }
            p_rec->free_pad_ptr -= len;
          }
          return (true);
        }
      }
    }
  }
#endif
  /* If here, not found */
  return (false);
}

/*******************************************************************************
 *
 * Function         SDP_ReadRecord
 *
 * Description      This function is called to get the raw data of the record
 *                  with the given handle from the database.
 *
 * Returns          -1, if the record is not found.
 *                  Otherwise, the offset (0 or 1) to start of data in p_data.
 *
 *                  The size of data copied into p_data is in *p_data_len.
 *
 ******************************************************************************/
#if (SDP_RAW_DATA_INCLUDED == TRUE)
int32_t SDP_ReadRecord(uint32_t handle, uint8_t* p_data, int32_t* p_data_len) {
  int32_t len = 0;     /* Number of bytes in the entry */
  int32_t offset = -1; /* default to not found */
#if (SDP_SERVER_ENABLED == TRUE)
  tSDP_RECORD* p_rec;
  uint16_t start = 0;
  uint16_t end = 0xffff;
  tSDP_ATTRIBUTE* p_attr;
  uint16_t rem_len;
  uint8_t* p_rsp;

  /* Find the record in the database */
  p_rec = sdp_db_find_record(handle);
  if (p_rec && p_data && p_data_len) {
    p_rsp = &p_data[3];
    while ((p_attr = sdp_db_find_attr_in_rec(p_rec, start, end)) != NULL) {
      /* Check if attribute fits. Assume 3-byte value type/length */
      rem_len = *p_data_len - (uint16_t)(p_rsp - p_data);

      if (p_attr->len > (uint32_t)(rem_len - 6)) break;

      p_rsp = sdpu_build_attrib_entry(p_rsp, p_attr);

      /* next attr id */
      start = p_attr->id + 1;
    }
    len = (int32_t)(p_rsp - p_data);

    /* Put in the sequence header (2 or 3 bytes) */
    if (len > 255) {
      offset = 0;
      p_data[0] = (uint8_t)((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD);
      p_data[1] = (uint8_t)((len - 3) >> 8);
      p_data[2] = (uint8_t)(len - 3);
    } else {
      offset = 1;

      p_data[1] = (uint8_t)((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
      p_data[2] = (uint8_t)(len - 3);

      len--;
    }
    *p_data_len = len;
  }
#endif
  /* If here, not found */
  return (offset);
}
#endif