bta/hf_client/bta_hf_client_rfc.cc

/******************************************************************************
 *
 *  Copyright (c) 2014 The Android Open Source Project
 *  Copyright 2004-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  This file contains the audio gateway functions controlling the RFCOMM
 *  connections.
 *
 ******************************************************************************/

#include <cstdint>

#include "bta/hf_client/bta_hf_client_int.h"
#include "osi/include/allocator.h"
#include "osi/include/osi.h"  // UNUSED_ATTR
#include "stack/include/port_api.h"
#include "stack/include/sdp_api.h"
#include "types/raw_address.h"

#include <base/logging.h>

/*******************************************************************************
 *
 * Function         bta_hf_client_port_cback
 *
 * Description      RFCOMM Port callback. The handle in this function is
 *                  specified by BTA layer via the PORT_SetEventCallback
 *                  method
 *
 * Returns          void
 *
 ******************************************************************************/
static void bta_hf_client_port_cback(UNUSED_ATTR uint32_t code,
                                     uint16_t port_handle) {
  /* ignore port events for port handles other than connected handle */
  tBTA_HF_CLIENT_CB* client_cb =
      bta_hf_client_find_cb_by_rfc_handle(port_handle);
  if (client_cb == NULL) {
    APPL_TRACE_ERROR("%s: cb not found for handle %d", __func__, port_handle);
    return;
  }

  tBTA_HF_CLIENT_RFC* p_buf =
      (tBTA_HF_CLIENT_RFC*)osi_malloc(sizeof(tBTA_HF_CLIENT_RFC));
  p_buf->hdr.event = BTA_HF_CLIENT_RFC_DATA_EVT;
  p_buf->hdr.layer_specific = client_cb->handle;
  bta_sys_sendmsg(p_buf);
}

/*******************************************************************************
 *
 * Function         bta_hf_client_mgmt_cback
 *
 * Description      RFCOMM management callback
 *
 *
 * Returns          void
 *
 ******************************************************************************/
static void bta_hf_client_mgmt_cback(uint32_t code, uint16_t port_handle) {
  tBTA_HF_CLIENT_CB* client_cb =
      bta_hf_client_find_cb_by_rfc_handle(port_handle);

  APPL_TRACE_DEBUG("%s: code = %d, port_handle = %d serv = %d", __func__, code,
                   port_handle, bta_hf_client_cb_arr.serv_handle);

  /* ignore close event for port handles other than connected handle */
  if (code != PORT_SUCCESS && client_cb != NULL &&
      port_handle != client_cb->conn_handle) {
    APPL_TRACE_DEBUG("bta_hf_client_mgmt_cback ignoring handle:%d",
                     port_handle);
    return;
  }

  tBTA_HF_CLIENT_RFC* p_buf =
      (tBTA_HF_CLIENT_RFC*)osi_malloc(sizeof(tBTA_HF_CLIENT_RFC));

  if (code == PORT_SUCCESS) {
    if (client_cb && port_handle == client_cb->conn_handle) { /* out conn */
      p_buf->hdr.event = BTA_HF_CLIENT_RFC_OPEN_EVT;
    } else if (port_handle == bta_hf_client_cb_arr.serv_handle) {
      p_buf->hdr.event = BTA_HF_CLIENT_RFC_OPEN_EVT;

      APPL_TRACE_DEBUG("%s: allocating a new CB for incoming connection",
                       __func__);
      // Find the BDADDR of the peer device
      RawAddress peer_addr = RawAddress::kEmpty;
      uint16_t lcid = 0;
      int status = PORT_CheckConnection(port_handle, &peer_addr, &lcid);
      if (status != PORT_SUCCESS) {
        LOG(ERROR) << __func__ << ": PORT_CheckConnection returned " << status;
      }

      // Since we accepted a remote request we should allocate a handle first.
      uint16_t tmp_handle = -1;
      bta_hf_client_allocate_handle(peer_addr, &tmp_handle);
      client_cb = bta_hf_client_find_cb_by_handle(tmp_handle);

      // If allocation fails then we abort.
      if (client_cb == NULL) {
        APPL_TRACE_ERROR("%s: error allocating a new handle", __func__);
        p_buf->hdr.event = BTA_HF_CLIENT_RFC_CLOSE_EVT;
      } else {
        // Set the connection fields for this new CB
        client_cb->conn_handle = port_handle;

        // Since we have accepted an incoming RFCOMM connection:
        // a) Release the current server from it duties
        // b) Start a new server for more new incoming connection
        bta_hf_client_cb_arr.serv_handle = 0;
        bta_hf_client_start_server();
      }
    } else {
      APPL_TRACE_ERROR("%s: PORT_SUCCESS, ignoring handle = %d", __func__,
                       port_handle);
      osi_free(p_buf);
      return;
    }
  } else if (client_cb != NULL &&
             port_handle == client_cb->conn_handle) { /* code != PORT_SUC */
    LOG(ERROR) << __func__ << ": closing port handle " << port_handle << "dev "
               << client_cb->peer_addr;

    RFCOMM_RemoveServer(port_handle);
    p_buf->hdr.event = BTA_HF_CLIENT_RFC_CLOSE_EVT;
  } else if (client_cb == NULL) {
    // client_cb is already cleaned due to hfp client disabled.
    // Assigned a valid event value to header and send this message anyway.
    p_buf->hdr.event = BTA_HF_CLIENT_RFC_CLOSE_EVT;
  }

  p_buf->hdr.layer_specific = client_cb != NULL ? client_cb->handle : 0;
  bta_sys_sendmsg(p_buf);
}

/*******************************************************************************
 *
 * Function         bta_hf_client_setup_port
 *
 * Description      Setup RFCOMM port for use by HF Client.
 *
 *
 * Returns          void
 *
 ******************************************************************************/
void bta_hf_client_setup_port(uint16_t handle) {
  PORT_SetEventMask(handle, PORT_EV_RXCHAR);
  PORT_SetEventCallback(handle, bta_hf_client_port_cback);
}

/*******************************************************************************
 *
 * Function         bta_hf_client_start_server
 *
 * Description      Setup RFCOMM server for use by HF Client.
 *
 *
 * Returns          void
 *
 ******************************************************************************/
void bta_hf_client_start_server() {
  int port_status;

  if (bta_hf_client_cb_arr.serv_handle > 0) {
    APPL_TRACE_DEBUG("%s: already started, handle: %d", __func__,
                     bta_hf_client_cb_arr.serv_handle);
    return;
  }

  port_status = RFCOMM_CreateConnectionWithSecurity(
      UUID_SERVCLASS_HF_HANDSFREE, bta_hf_client_cb_arr.scn, true,
      BTA_HF_CLIENT_MTU, RawAddress::kAny, &(bta_hf_client_cb_arr.serv_handle),
      bta_hf_client_mgmt_cback, BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);

  APPL_TRACE_DEBUG("%s: started rfcomm server with handle %d", __func__,
                   bta_hf_client_cb_arr.serv_handle);

  if (port_status == PORT_SUCCESS) {
    bta_hf_client_setup_port(bta_hf_client_cb_arr.serv_handle);
  } else {
    APPL_TRACE_DEBUG("%s: RFCOMM_CreateConnection returned error:%d", __func__,
                     port_status);
  }
}

/*******************************************************************************
 *
 * Function         bta_hf_client_close_server
 *
 * Description      Close RFCOMM server port for use by HF Client.
 *
 *
 * Returns          void
 *
 ******************************************************************************/
void bta_hf_client_close_server() {
  APPL_TRACE_DEBUG("%s: %d", __func__, bta_hf_client_cb_arr.serv_handle);

  if (bta_hf_client_cb_arr.serv_handle == 0) {
    APPL_TRACE_DEBUG("%s: already stopped", __func__);
    return;
  }

  RFCOMM_RemoveServer(bta_hf_client_cb_arr.serv_handle);
  bta_hf_client_cb_arr.serv_handle = 0;
}

/*******************************************************************************
 *
 * Function         bta_hf_client_rfc_do_open
 *
 * Description      Open an RFCOMM connection to the peer device.
 *
 *
 * Returns          void
 *
 ******************************************************************************/
void bta_hf_client_rfc_do_open(tBTA_HF_CLIENT_DATA* p_data) {
  tBTA_HF_CLIENT_CB* client_cb =
      bta_hf_client_find_cb_by_handle(p_data->hdr.layer_specific);
  if (client_cb == NULL) {
    APPL_TRACE_ERROR("%s: cb not found for handle %d", __func__,
                     p_data->hdr.layer_specific);
    return;
  }

  if (RFCOMM_CreateConnectionWithSecurity(
          UUID_SERVCLASS_HF_HANDSFREE, client_cb->peer_scn, false,
          BTA_HF_CLIENT_MTU, client_cb->peer_addr, &(client_cb->conn_handle),
          bta_hf_client_mgmt_cback,
          BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT) == PORT_SUCCESS) {
    bta_hf_client_setup_port(client_cb->conn_handle);
    APPL_TRACE_DEBUG("bta_hf_client_rfc_do_open : conn_handle = %d",
                     client_cb->conn_handle);
  }
  /* RFCOMM create connection failed; send ourselves RFCOMM close event */
  else {
    bta_hf_client_sm_execute(BTA_HF_CLIENT_RFC_CLOSE_EVT, p_data);
  }
}

/*******************************************************************************
 *
 * Function         bta_hf_client_rfc_do_close
 *
 * Description      Close RFCOMM connection.
 *
 *
 * Returns          void
 *
 ******************************************************************************/
void bta_hf_client_rfc_do_close(tBTA_HF_CLIENT_DATA* p_data) {
  tBTA_HF_CLIENT_CB* client_cb =
      bta_hf_client_find_cb_by_handle(p_data->hdr.layer_specific);
  if (client_cb == NULL) {
    APPL_TRACE_ERROR("%s: cb not found for handle %d", __func__,
                     p_data->hdr.layer_specific);
    return;
  }

  if (client_cb->conn_handle) {
    RFCOMM_RemoveConnection(client_cb->conn_handle);
  } else {
    /* Close API was called while HF Client is in Opening state.        */
    /* Need to trigger the state machine to send callback to the app    */
    /* and move back to INIT state.                                     */
    tBTA_HF_CLIENT_RFC* p_buf =
        (tBTA_HF_CLIENT_RFC*)osi_malloc(sizeof(tBTA_HF_CLIENT_RFC));
    p_buf->hdr.event = BTA_HF_CLIENT_RFC_CLOSE_EVT;
    bta_sys_sendmsg(p_buf);

    /* Cancel SDP if it had been started. */
    if (client_cb->p_disc_db) {
      (void)SDP_CancelServiceSearch(client_cb->p_disc_db);
      osi_free_and_reset((void**)&client_cb->p_disc_db);
    }
  }
}