arm/rebuild.sh - platform/prebuilts/qemu-kernel - Git at Google

 #!/bin/sh
 #
 # Copyright (C) 2011 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 # This script is used to rebuild the Android goldfish arm-based kernel from
 # sources.

 ###
 ### Utilities
 ###

 # Implementation of 'dirname' that works safely when paths contains spaces
 # $1: output variable name
 # $2: path (may contain spaces)
 # Usage: set_dirname FOO "/path/to/foo with spaces"
 set_dirname ()
 {
     eval $1="`dirname \"$2\"`"
 }

 # Same as set_dirname, but for the 'basename' command
 set_basename ()
 {
     eval $1="`basename \"$2\"`"
 }

 # Check the status of the previous command, and print a message and exit
 # if it didn't succeed.
 fail_panic ()
 {
     if [ $? != 0 ]; then
         echo "ERROR: $@"
         exit 1
     fi
 }

 # Send a message to the log. Does nothing if --verbose is not used
 log ()
 {
     if [ "$VERBOSE" = "yes" ] ; then
         echo "$@"
     fi
 }

 # Run a comment. Print it to the output first if --verbose is used
 run ()
 {
     if [ "$VERBOSE" = "yes" ] ; then
         echo "### COMMAND: $@"
         $@
     else
         $@ >/dev/null 2>&1
     fi
 }

 fail_ifnotdir ()
 {
     local _dir="$1"
     if [ ! -d "$_dir" ]; then
         shift
         echo "ERROR: $@ ($_dir)"
         exit 1
     fi
 }

 # Check wether program '$2' is in your path, and set variable $1 to its
 # full path, or to empty otherwise.
 # Example: find_program FOO foo
 #
 # $1: Variable name
 # $2: Program name
 find_program ()
 {
     local FINDPROG_=`which $2 2>/dev/null`
     if [ -n "$FINDPROG_" ]; then
         eval $1="$FINDPROG_";
     else
         eval $1=
     fi
 }

 set_dirname  PROGDIR  "$0"
 set_basename PROGNAME "$0"

 ###
 ### Get defaults
 ###

 # Location of prebuilt kernel images relative to Android top-level
 PREBUILT_KERNEL_DIR="prebuilts/qemu-kernel/arm"

 # Look for top-level Android build source tree if not in environment

 if [ -n "$ANDROID_BUILD_TOP" ] ; then
     OUT_DIR="$ANDROID_BUILD_TOP/$PREBUILT_KERNEL_DIR"
 else
     OUT_DIR=
 fi

 TOOLCHAIN_NAME=arm-eabi-4.4.0
 TOOLCHAIN_PREFIX=arm-eabi
 GCC="$TOOLCHAIN_PREFIX-gcc"

 JOBS="`cat /proc/cpuinfo | grep -e "^processor" | wc -l`"

 ###
 ### Parse options
 ###
 OPTION_HELP=no
 VERBOSE=no
 VERBOSE2=no
 OPTION_OUT_DIR=
 OPTION_CC=

 PARAMS=""

 for opt do
     optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'`
     case "$opt" in
         --help|-h|-\?) OPTION_HELP=yes
             ;;
         --verbose)
             if [ "$VERBOSE" = "yes" ] ; then
                 VERBOSE2=yes
             else
                 VERBOSE=yes
             fi
             ;;
         --out-dir=*)
             OPTION_OUT_DIR="$optarg"
             ;;
         --cc=*)
             OPTION_CC="$optarg"
             ;;
         --toolchain=*)
             TOOLCHAIN_NAME="$optarg"
             ;;
         --jobs=*)
             JOBS="$optarg"
             ;;
         -*)
             echo "unknown option '$opt', use --help"
             exit 1
             ;;
         *)
             if [ -z "$PARAMS" ] ; then
                 PARAMS="$opt"
             else
                 PARAMS="$PARAMS $opt"
             fi
             ;;
     esac
 done

 if [ "$OPTION_HELP" = "yes" ] ; then
     echo "Usage: $PROGNAME <options> /path/to/kernel"
     echo ""
     echo "Rebuild the prebuilt Android goldfish-specific kernel from sources."
     echo ""
     echo "Options (default are inside brackets):"
     echo ""
     echo "    --help                Print this message."
     echo "    --verbose             Enable verbose output."
     echo "    --android=<path>      Set Android top-level directory [$ANDROID_BUILD_TOP]"
     echo "    --out-dir=<path>      Set output directory [$OUT_DIR]"
     echo "    --toolchain=<name>    Toolchain name [$TOOLCHAIN_NAME]"
     echo "    --cc=<path>           Path to C compiler [$GCC]"
     echo "    --jobs=<count>        Perform <count> parallel builds [$JOBS]"
     echo ""
     echo "The --toolchain option is ignored if you use the --cc one."
     exit 0
 fi

 ###
 ### Parse parameters
 ###

 set_parameters ()
 {
     if [ -z "$1" ] ; then
         echo "ERROR: Please specify path of kernel sources directory. See --help for details."
         exit 1
     fi
     if [ -n "$2" ]; then
         echo "ERROR: Too many arguments. See --help for details."
         exit 1
     fi
     KERNEL_DIR="$1"
     fail_ifnotdir "$KERNEL_DIR" "Missing kernel directory"
     fail_ifnotdir "$KERNEL_DIR/kernel" "Missing kernel-specific directory"
     fail_ifnotdir "$KERNEL_DIR/arch"   "Missing kernel-specific directory"
     fail_ifnotdir "$KERNEL_DIR/arch/arm/mach-goldfish" "Missing goldfish-specific directory"
 }

 set_parameters $PARAMS

 ###
 ### Determine build configuration
 ###

 if [ -n "$OPTION_OUT_DIR" ] ; then
     OUT_DIR="$OPTION_OUT_DIR"
 fi

 if [ -z "$ANDROID_BUILD_TOP" ] ; then
     # Assume that we are under $ANDROID_BUILD_TOP/prebuilt/android-arm/kernel
     ANDROID_BUILD_TOP="`cd \"$PROGDIR\"/../../.. && pwd`"
     if [ -d "$ANDROID_BUILD_TOP" ]; then
         echo "Probed Android top-level directory: $ANDROID_BUILD_TOP"
     else
         echo "ERROR: Can't find Android top-leveld directory. Please define ANDROID_BUILD_TOP"
         exit 1
     fi
 fi

 if [ -z "$OUT_DIR" ] ; then
     OUT_DIR="$ANDROID_BUILD_TOP/$PREBUILT_KERNEL_DIR"
     if [ ! -d "$OUT_DIR" ]; then
         echo "ERROR: Missing default output dir: $OUT_DIR"
         echo "Please use --out-dir=<path> to specify alternative output directory."
         exit 1
     fi
 fi

 echo "Using output directory: $OUT_DIR"
 mkdir -p "$OUT_DIR"
 fail_panic "Could not create directory: $OUT_DIR"

 # Find toolchain

 if [ -n "$OPTION_CC" ]; then
     GCC="$OPTION_CC"
 else
     find_program GCC $TOOLCHAIN_PREFIX-gcc
 fi

 if [ -z "$GCC" ]; then
     TOOLCHAIN_DIR="$ANDROID_BUILD_TOP/prebuilt/linux-x86/toolchain/$TOOLCHAIN_NAME/bin"
     if [ ! -d "$TOOLCHAIN_DIR" ] ; then
         echo "ERROR: Missing directory: $TOOLCHAIN_DIR"
         exit 1
     fi
     GCC="$TOOLCHAIN_DIR/$TOOLCHAIN_PREFIX-gcc"
     if [ ! -f "$GCC" ] ; then
         echo "ERROR: Missing program file: $GCC"
         exit 1
     fi
 fi

 CROSS_COMPILE="`echo $GCC | sed -e 's!gcc$!!g' `"
 echo "Using cross-toolchain prefix: $CROSS_COMPILE"

 # Do we have ccache in our path?
 find_program CCACHE ccache
 if [ -n "$CCACHE" ]; then
     echo "Using ccache program: $CCACHE"
     CROSS_COMPILE="ccache $CROSS_COMPILE"
 fi

 ###
 ### Do the build
 ###

 cd "$KERNEL_DIR"
 ARCH=arm
 SUBARCH=arm

 export CROSS_COMPILE ARCH SUBARCH

 # $1: defconfig name (e.g. goldfish or goldfish_armv7)
 # $2: output suffix (e.g. "" or "-armv7")
 do_build ()
 {
     MAKE_FLAGS="-j$JOBS"
     # Use --verbose --verbose to see build commands
     if [ "$VERBOSE2" = "yes" ] ; then
         MAKE_FLAGS="$MAKE_FLAGS V=1"
     fi
     echo "Cleaning up source tree."
     git ls-files -o | xargs rm -f
     echo "Setting up $1_defconfig..."
     run make $1_defconfig
     fail_panic "Could not setup $1_defconfig build!"
     echo "Building $1_deconfig..."
     run make $MAKE_FLAGS
     fail_panic "Could not build $1_defconfig!"
     echo "Copying $1_defconfig binaries to $OUT_DIR."
     cp -f arch/arm/boot/zImage "$OUT_DIR/kernel-qemu$2"
     cp -f vmlinux "$OUT_DIR/vmlinux-qemu$2"
 }

 do_build goldfish
 if [ -f arch/arm/configs/goldfish_armv7_defconfig ]; then
     do_build goldfish_armv7 -armv7
 fi

 echo "Done."
 exit 0
	#!/bin/sh
	#
	# Copyright (C) 2011 The Android Open Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	# This script is used to rebuild the Android goldfish arm-based kernel from
	# sources.

	###
	### Utilities
	###

	# Implementation of 'dirname' that works safely when paths contains spaces
	# $1: output variable name
	# $2: path (may contain spaces)
	# Usage: set_dirname FOO "/path/to/foo with spaces"
	set_dirname ()
	{
	eval $1="`dirname \"$2\"`"
	}

	# Same as set_dirname, but for the 'basename' command
	set_basename ()
	{
	eval $1="`basename \"$2\"`"
	}

	# Check the status of the previous command, and print a message and exit
	# if it didn't succeed.
	fail_panic ()
	{
	if [ $? != 0 ]; then
	echo "ERROR: $@"
	exit 1
	fi
	}

	# Send a message to the log. Does nothing if --verbose is not used
	log ()
	{
	if [ "$VERBOSE" = "yes" ] ; then
	echo "$@"
	fi
	}

	# Run a comment. Print it to the output first if --verbose is used
	run ()
	{
	if [ "$VERBOSE" = "yes" ] ; then
	echo "### COMMAND: $@"
	$@
	else
	$@ >/dev/null 2>&1
	fi
	}

	fail_ifnotdir ()
	{
	local _dir="$1"
	if [ ! -d "$_dir" ]; then
	shift
	echo "ERROR: $@ ($_dir)"
	exit 1
	fi
	}

	# Check wether program '$2' is in your path, and set variable $1 to its
	# full path, or to empty otherwise.
	# Example: find_program FOO foo
	#
	# $1: Variable name
	# $2: Program name
	find_program ()
	{
	local FINDPROG_=`which $2 2>/dev/null`
	if [ -n "$FINDPROG_" ]; then
	eval $1="$FINDPROG_";
	else
	eval $1=
	fi
	}

	set_dirname PROGDIR "$0"
	set_basename PROGNAME "$0"

	###
	### Get defaults
	###

	# Location of prebuilt kernel images relative to Android top-level
	PREBUILT_KERNEL_DIR="prebuilts/qemu-kernel/arm"

	# Look for top-level Android build source tree if not in environment

	if [ -n "$ANDROID_BUILD_TOP" ] ; then
	OUT_DIR="$ANDROID_BUILD_TOP/$PREBUILT_KERNEL_DIR"
	else
	OUT_DIR=
	fi

	TOOLCHAIN_NAME=arm-eabi-4.4.0
	TOOLCHAIN_PREFIX=arm-eabi
	GCC="$TOOLCHAIN_PREFIX-gcc"

	JOBS="`cat /proc/cpuinfo \| grep -e "^processor" \| wc -l`"

	###
	### Parse options
	###
	OPTION_HELP=no
	VERBOSE=no
	VERBOSE2=no
	OPTION_OUT_DIR=
	OPTION_CC=

	PARAMS=""

	for opt do
	optarg=`expr "x$opt" : 'x[^=]=\(.\)'`
	case "$opt" in
	--help\|-h\|-\?) OPTION_HELP=yes
	;;
	--verbose)
	if [ "$VERBOSE" = "yes" ] ; then
	VERBOSE2=yes
	else
	VERBOSE=yes
	fi
	;;
	--out-dir=*)
	OPTION_OUT_DIR="$optarg"
	;;
	--cc=*)
	OPTION_CC="$optarg"
	;;
	--toolchain=*)
	TOOLCHAIN_NAME="$optarg"
	;;
	--jobs=*)
	JOBS="$optarg"
	;;
	-*)
	echo "unknown option '$opt', use --help"
	exit 1
	;;
	*)
	if [ -z "$PARAMS" ] ; then
	PARAMS="$opt"
	else
	PARAMS="$PARAMS $opt"
	fi
	;;
	esac
	done

	if [ "$OPTION_HELP" = "yes" ] ; then
	echo "Usage: $PROGNAME <options> /path/to/kernel"
	echo ""
	echo "Rebuild the prebuilt Android goldfish-specific kernel from sources."
	echo ""
	echo "Options (default are inside brackets):"
	echo ""
	echo " --help Print this message."
	echo " --verbose Enable verbose output."
	echo " --android=<path> Set Android top-level directory [$ANDROID_BUILD_TOP]"
	echo " --out-dir=<path> Set output directory [$OUT_DIR]"
	echo " --toolchain=<name> Toolchain name [$TOOLCHAIN_NAME]"
	echo " --cc=<path> Path to C compiler [$GCC]"
	echo " --jobs=<count> Perform <count> parallel builds [$JOBS]"
	echo ""
	echo "The --toolchain option is ignored if you use the --cc one."
	exit 0
	fi

	###
	### Parse parameters
	###

	set_parameters ()
	{
	if [ -z "$1" ] ; then
	echo "ERROR: Please specify path of kernel sources directory. See --help for details."
	exit 1
	fi
	if [ -n "$2" ]; then
	echo "ERROR: Too many arguments. See --help for details."
	exit 1
	fi
	KERNEL_DIR="$1"
	fail_ifnotdir "$KERNEL_DIR" "Missing kernel directory"
	fail_ifnotdir "$KERNEL_DIR/kernel" "Missing kernel-specific directory"
	fail_ifnotdir "$KERNEL_DIR/arch" "Missing kernel-specific directory"
	fail_ifnotdir "$KERNEL_DIR/arch/arm/mach-goldfish" "Missing goldfish-specific directory"
	}

	set_parameters $PARAMS

	###
	### Determine build configuration
	###

	if [ -n "$OPTION_OUT_DIR" ] ; then
	OUT_DIR="$OPTION_OUT_DIR"
	fi

	if [ -z "$ANDROID_BUILD_TOP" ] ; then
	# Assume that we are under $ANDROID_BUILD_TOP/prebuilt/android-arm/kernel
	ANDROID_BUILD_TOP="`cd \"$PROGDIR\"/../../.. && pwd`"
	if [ -d "$ANDROID_BUILD_TOP" ]; then
	echo "Probed Android top-level directory: $ANDROID_BUILD_TOP"
	else
	echo "ERROR: Can't find Android top-leveld directory. Please define ANDROID_BUILD_TOP"
	exit 1
	fi
	fi

	if [ -z "$OUT_DIR" ] ; then
	OUT_DIR="$ANDROID_BUILD_TOP/$PREBUILT_KERNEL_DIR"
	if [ ! -d "$OUT_DIR" ]; then
	echo "ERROR: Missing default output dir: $OUT_DIR"
	echo "Please use --out-dir=<path> to specify alternative output directory."
	exit 1
	fi
	fi

	echo "Using output directory: $OUT_DIR"
	mkdir -p "$OUT_DIR"
	fail_panic "Could not create directory: $OUT_DIR"

	# Find toolchain

	if [ -n "$OPTION_CC" ]; then
	GCC="$OPTION_CC"
	else
	find_program GCC $TOOLCHAIN_PREFIX-gcc
	fi

	if [ -z "$GCC" ]; then
	TOOLCHAIN_DIR="$ANDROID_BUILD_TOP/prebuilt/linux-x86/toolchain/$TOOLCHAIN_NAME/bin"
	if [ ! -d "$TOOLCHAIN_DIR" ] ; then
	echo "ERROR: Missing directory: $TOOLCHAIN_DIR"
	exit 1
	fi
	GCC="$TOOLCHAIN_DIR/$TOOLCHAIN_PREFIX-gcc"
	if [ ! -f "$GCC" ] ; then
	echo "ERROR: Missing program file: $GCC"
	exit 1
	fi
	fi

	CROSS_COMPILE="`echo $GCC \| sed -e 's!gcc$!!g' `"
	echo "Using cross-toolchain prefix: $CROSS_COMPILE"

	# Do we have ccache in our path?
	find_program CCACHE ccache
	if [ -n "$CCACHE" ]; then
	echo "Using ccache program: $CCACHE"
	CROSS_COMPILE="ccache $CROSS_COMPILE"
	fi

	###
	### Do the build
	###

	cd "$KERNEL_DIR"
	ARCH=arm
	SUBARCH=arm

	export CROSS_COMPILE ARCH SUBARCH

	# $1: defconfig name (e.g. goldfish or goldfish_armv7)
	# $2: output suffix (e.g. "" or "-armv7")
	do_build ()
	{
	MAKE_FLAGS="-j$JOBS"
	# Use --verbose --verbose to see build commands
	if [ "$VERBOSE2" = "yes" ] ; then
	MAKE_FLAGS="$MAKE_FLAGS V=1"
	fi
	echo "Cleaning up source tree."
	git ls-files -o \| xargs rm -f
	echo "Setting up $1_defconfig..."
	run make $1_defconfig
	fail_panic "Could not setup $1_defconfig build!"
	echo "Building $1_deconfig..."
	run make $MAKE_FLAGS
	fail_panic "Could not build $1_defconfig!"
	echo "Copying $1_defconfig binaries to $OUT_DIR."
	cp -f arch/arm/boot/zImage "$OUT_DIR/kernel-qemu$2"
	cp -f vmlinux "$OUT_DIR/vmlinux-qemu$2"
	}

	do_build goldfish
	if [ -f arch/arm/configs/goldfish_armv7_defconfig ]; then
	do_build goldfish_armv7 -armv7
	fi

	echo "Done."
	exit 0