Prebuilts needed for building AndroidAuto's DHU

Add SDL2: zlib license.
Add SDL2_ttf: zlib license.
Add freetype: FTL license (BSD-like).

Change-Id: I23ba66423c85e1aaffefb1d507b39145aea80da7
diff --git a/darwin-x86_64/freetype/MODULE_LICENSE_BSD_LIKE b/darwin-x86_64/freetype/MODULE_LICENSE_BSD_LIKE
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/darwin-x86_64/freetype/MODULE_LICENSE_BSD_LIKE
diff --git a/darwin-x86_64/freetype/PREBUILT b/darwin-x86_64/freetype/PREBUILT
new file mode 100644
index 0000000..8cebc0a
--- /dev/null
+++ b/darwin-x86_64/freetype/PREBUILT
@@ -0,0 +1,3 @@
+Taken from MacPorts installation.
+
+Install freetype-2.6 using MacPorts. Grab headers and libraries from /opt/local.
diff --git a/darwin-x86_64/freetype/include/freetype2/config/ftconfig.h b/darwin-x86_64/freetype/include/freetype2/config/ftconfig.h
new file mode 100644
index 0000000..f347e09
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/config/ftconfig.h
@@ -0,0 +1,498 @@
+/* ftconfig.h.  Generated from ftconfig.in by configure.  */
+/***************************************************************************/
+/*                                                                         */
+/*  ftconfig.in                                                            */
+/*                                                                         */
+/*    UNIX-specific configuration file (specification only).               */
+/*                                                                         */
+/*  Copyright 1996-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* This header file contains a number of macro definitions that are used */
+  /* by the rest of the engine.  Most of the macros here are automatically */
+  /* determined at compile time, and you should not need to change it to   */
+  /* port FreeType, except to compile the library with a non-ANSI          */
+  /* compiler.                                                             */
+  /*                                                                       */
+  /* Note however that if some specific modifications are needed, we       */
+  /* advise you to place a modified copy in your build directory.          */
+  /*                                                                       */
+  /* The build directory is usually `builds/<system>', and contains        */
+  /* system-specific files that are always included first when building    */
+  /* the library.                                                          */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+#ifndef __FTCONFIG_H__
+#define __FTCONFIG_H__
+
+#include <ft2build.h>
+#include FT_CONFIG_OPTIONS_H
+#include FT_CONFIG_STANDARD_LIBRARY_H
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /*               PLATFORM-SPECIFIC CONFIGURATION MACROS                  */
+  /*                                                                       */
+  /* These macros can be toggled to suit a specific system.  The current   */
+  /* ones are defaults used to compile FreeType in an ANSI C environment   */
+  /* (16bit compilers are also supported).  Copy this file to your own     */
+  /* `builds/<system>' directory, and edit it to port the engine.          */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+#define HAVE_UNISTD_H 1
+#define HAVE_FCNTL_H 1
+#define HAVE_STDINT_H 1
+
+
+  /* There are systems (like the Texas Instruments 'C54x) where a `char' */
+  /* has 16 bits.  ANSI C says that sizeof(char) is always 1.  Since an  */
+  /* `int' has 16 bits also for this system, sizeof(int) gives 1 which   */
+  /* is probably unexpected.                                             */
+  /*                                                                     */
+  /* `CHAR_BIT' (defined in limits.h) gives the number of bits in a      */
+  /* `char' type.                                                        */
+
+#ifndef FT_CHAR_BIT
+#define FT_CHAR_BIT  CHAR_BIT
+#endif
+
+
+/* #undef FT_USE_AUTOCONF_SIZEOF_TYPES */
+#ifdef FT_USE_AUTOCONF_SIZEOF_TYPES
+
+#define SIZEOF_INT 4
+#define SIZEOF_LONG 8
+#define FT_SIZEOF_INT  SIZEOF_INT
+#define FT_SIZEOF_LONG SIZEOF_LONG
+
+#else /* !FT_USE_AUTOCONF_SIZEOF_TYPES */
+
+  /* Following cpp computation of the bit length of int and long */
+  /* is copied from default include/config/ftconfig.h.           */
+  /* If any improvement is required for this file, it should be  */
+  /* applied to the original header file for the builders that   */
+  /* do not use configure script.                                */
+
+  /* The size of an `int' type.  */
+#if                                 FT_UINT_MAX == 0xFFFFUL
+#define FT_SIZEOF_INT  (16 / FT_CHAR_BIT)
+#elif                               FT_UINT_MAX == 0xFFFFFFFFUL
+#define FT_SIZEOF_INT  (32 / FT_CHAR_BIT)
+#elif FT_UINT_MAX > 0xFFFFFFFFUL && FT_UINT_MAX == 0xFFFFFFFFFFFFFFFFUL
+#define FT_SIZEOF_INT  (64 / FT_CHAR_BIT)
+#else
+#error "Unsupported size of `int' type!"
+#endif
+
+  /* The size of a `long' type.  A five-byte `long' (as used e.g. on the */
+  /* DM642) is recognized but avoided.                                   */
+#if                                  FT_ULONG_MAX == 0xFFFFFFFFUL
+#define FT_SIZEOF_LONG  (32 / FT_CHAR_BIT)
+#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFUL
+#define FT_SIZEOF_LONG  (32 / FT_CHAR_BIT)
+#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFFFFFFFUL
+#define FT_SIZEOF_LONG  (64 / FT_CHAR_BIT)
+#else
+#error "Unsupported size of `long' type!"
+#endif
+
+#endif /* !FT_USE_AUTOCONF_SIZEOF_TYPES */
+
+
+  /* FT_UNUSED is a macro used to indicate that a given parameter is not  */
+  /* used -- this is only used to get rid of unpleasant compiler warnings */
+#ifndef FT_UNUSED
+#define FT_UNUSED( arg )  ( (arg) = (arg) )
+#endif
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /*                     AUTOMATIC CONFIGURATION MACROS                    */
+  /*                                                                       */
+  /* These macros are computed from the ones defined above.  Don't touch   */
+  /* their definition, unless you know precisely what you are doing.  No   */
+  /* porter should need to mess with them.                                 */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Mac support                                                           */
+  /*                                                                       */
+  /*   This is the only necessary change, so it is defined here instead    */
+  /*   providing a new configuration file.                                 */
+  /*                                                                       */
+#if defined( __APPLE__ ) || ( defined( __MWERKS__ ) && defined( macintosh ) )
+  /* no Carbon frameworks for 64bit 10.4.x */
+  /* AvailabilityMacros.h is available since Mac OS X 10.2,        */
+  /* so guess the system version by maximum errno before inclusion */
+#include <errno.h>
+#ifdef ECANCELED /* defined since 10.2 */
+#include "AvailabilityMacros.h"
+#endif
+#if defined( __LP64__ ) && \
+    ( MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4 )
+#undef FT_MACINTOSH
+#endif
+
+#elif defined( __SC__ ) || defined( __MRC__ )
+  /* Classic MacOS compilers */
+#include "ConditionalMacros.h"
+#if TARGET_OS_MAC
+#define FT_MACINTOSH 1
+#endif
+
+#endif
+
+
+  /* Fix compiler warning with sgi compiler */
+#if defined( __sgi ) && !defined( __GNUC__ )
+#if defined( _COMPILER_VERSION ) && ( _COMPILER_VERSION >= 730 )
+#pragma set woff 3505
+#endif
+#endif
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    basic_types                                                        */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Int16                                                           */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A typedef for a 16bit signed integer type.                         */
+  /*                                                                       */
+  typedef signed short  FT_Int16;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_UInt16                                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A typedef for a 16bit unsigned integer type.                       */
+  /*                                                                       */
+  typedef unsigned short  FT_UInt16;
+
+  /* */
+
+
+  /* this #if 0 ... #endif clause is for documentation purposes */
+#if 0
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Int32                                                           */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A typedef for a 32bit signed integer type.  The size depends on    */
+  /*    the configuration.                                                 */
+  /*                                                                       */
+  typedef signed XXX  FT_Int32;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_UInt32                                                          */
+  /*                                                                       */
+  /*    A typedef for a 32bit unsigned integer type.  The size depends on  */
+  /*    the configuration.                                                 */
+  /*                                                                       */
+  typedef unsigned XXX  FT_UInt32;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Int64                                                           */
+  /*                                                                       */
+  /*    A typedef for a 64bit signed integer type.  The size depends on    */
+  /*    the configuration.  Only defined if there is real 64bit support;   */
+  /*    otherwise, it gets emulated with a structure (if necessary).       */
+  /*                                                                       */
+  typedef signed XXX  FT_Int64;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_UInt64                                                          */
+  /*                                                                       */
+  /*    A typedef for a 64bit unsigned integer type.  The size depends on  */
+  /*    the configuration.  Only defined if there is real 64bit support;   */
+  /*    otherwise, it gets emulated with a structure (if necessary).       */
+  /*                                                                       */
+  typedef unsigned XXX  FT_UInt64;
+
+  /* */
+
+#endif
+
+#if FT_SIZEOF_INT == 4
+
+  typedef signed int      FT_Int32;
+  typedef unsigned int    FT_UInt32;
+
+#elif FT_SIZEOF_LONG == 4
+
+  typedef signed long     FT_Int32;
+  typedef unsigned long   FT_UInt32;
+
+#else
+#error "no 32bit type found -- please check your configuration files"
+#endif
+
+
+  /* look up an integer type that is at least 32 bits */
+#if FT_SIZEOF_INT >= 4
+
+  typedef int            FT_Fast;
+  typedef unsigned int   FT_UFast;
+
+#elif FT_SIZEOF_LONG >= 4
+
+  typedef long           FT_Fast;
+  typedef unsigned long  FT_UFast;
+
+#endif
+
+
+  /* determine whether we have a 64-bit int type for platforms without */
+  /* Autoconf                                                          */
+#if FT_SIZEOF_LONG == 8
+
+  /* FT_LONG64 must be defined if a 64-bit type is available */
+#define FT_LONG64
+#define FT_INT64   long
+#define FT_UINT64  unsigned long
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* A 64-bit data type may create compilation problems if you compile     */
+  /* in strict ANSI mode.  To avoid them, we disable other 64-bit data     */
+  /* types if __STDC__ is defined.  You can however ignore this rule       */
+  /* by defining the FT_CONFIG_OPTION_FORCE_INT64 configuration macro.     */
+  /*                                                                       */
+#elif !defined( __STDC__ ) || defined( FT_CONFIG_OPTION_FORCE_INT64 )
+
+#if defined( _MSC_VER ) && _MSC_VER >= 900  /* Visual C++ (and Intel C++) */
+
+  /* this compiler provides the __int64 type */
+#define FT_LONG64
+#define FT_INT64   __int64
+#define FT_UINT64  unsigned __int64
+
+#elif defined( __BORLANDC__ )  /* Borland C++ */
+
+  /* XXXX: We should probably check the value of __BORLANDC__ in order */
+  /*       to test the compiler version.                               */
+
+  /* this compiler provides the __int64 type */
+#define FT_LONG64
+#define FT_INT64   __int64
+#define FT_UINT64  unsigned __int64
+
+#elif defined( __WATCOMC__ )   /* Watcom C++ */
+
+  /* Watcom doesn't provide 64-bit data types */
+
+#elif defined( __MWERKS__ )    /* Metrowerks CodeWarrior */
+
+#define FT_LONG64
+#define FT_INT64   long long int
+#define FT_UINT64  unsigned long long int
+
+#elif defined( __GNUC__ )
+
+  /* GCC provides the `long long' type */
+#define FT_LONG64
+#define FT_INT64   long long int
+#define FT_UINT64  unsigned long long int
+
+#endif /* _MSC_VER */
+
+#endif /* FT_SIZEOF_LONG == 8 */
+
+#ifdef FT_LONG64
+  typedef FT_INT64   FT_Int64;
+  typedef FT_UINT64  FT_UInt64;
+#endif
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* miscellaneous                                                         */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+#define FT_BEGIN_STMNT  do {
+#define FT_END_STMNT    } while ( 0 )
+#define FT_DUMMY_STMNT  FT_BEGIN_STMNT FT_END_STMNT
+
+
+  /* typeof condition taken from gnulib's `intprops.h' header file */
+#if ( __GNUC__ >= 2                         || \
+      defined( __IBM__TYPEOF__ )            || \
+      ( __SUNPRO_C >= 0x5110 && !__STDC__ ) )
+#define TYPEOF( type )  (__typeof__ (type))
+#else
+#define TYPEOF( type )  /* empty */
+#endif
+
+
+#ifdef FT_MAKE_OPTION_SINGLE_OBJECT
+
+#define FT_LOCAL( x )      static  x
+#define FT_LOCAL_DEF( x )  static  x
+
+#else
+
+#ifdef __cplusplus
+#define FT_LOCAL( x )      extern "C"  x
+#define FT_LOCAL_DEF( x )  extern "C"  x
+#else
+#define FT_LOCAL( x )      extern  x
+#define FT_LOCAL_DEF( x )  x
+#endif
+
+#endif /* FT_MAKE_OPTION_SINGLE_OBJECT */
+
+#define FT_LOCAL_ARRAY( x )      extern const  x
+#define FT_LOCAL_ARRAY_DEF( x )  const  x
+
+
+#ifndef FT_BASE
+
+#ifdef __cplusplus
+#define FT_BASE( x )  extern "C"  x
+#else
+#define FT_BASE( x )  extern  x
+#endif
+
+#endif /* !FT_BASE */
+
+
+#ifndef FT_BASE_DEF
+
+#ifdef __cplusplus
+#define FT_BASE_DEF( x )  x
+#else
+#define FT_BASE_DEF( x )  x
+#endif
+
+#endif /* !FT_BASE_DEF */
+
+
+#ifndef FT_EXPORT
+
+#ifdef __cplusplus
+#define FT_EXPORT( x )  extern "C"  x
+#else
+#define FT_EXPORT( x )  extern  x
+#endif
+
+#endif /* !FT_EXPORT */
+
+
+#ifndef FT_EXPORT_DEF
+
+#ifdef __cplusplus
+#define FT_EXPORT_DEF( x )  extern "C"  x
+#else
+#define FT_EXPORT_DEF( x )  extern  x
+#endif
+
+#endif /* !FT_EXPORT_DEF */
+
+
+#ifndef FT_EXPORT_VAR
+
+#ifdef __cplusplus
+#define FT_EXPORT_VAR( x )  extern "C"  x
+#else
+#define FT_EXPORT_VAR( x )  extern  x
+#endif
+
+#endif /* !FT_EXPORT_VAR */
+
+  /* The following macros are needed to compile the library with a   */
+  /* C++ compiler and with 16bit compilers.                          */
+  /*                                                                 */
+
+  /* This is special.  Within C++, you must specify `extern "C"' for */
+  /* functions which are used via function pointers, and you also    */
+  /* must do that for structures which contain function pointers to  */
+  /* assure C linkage -- it's not possible to have (local) anonymous */
+  /* functions which are accessed by (global) function pointers.     */
+  /*                                                                 */
+  /*                                                                 */
+  /* FT_CALLBACK_DEF is used to _define_ a callback function.        */
+  /*                                                                 */
+  /* FT_CALLBACK_TABLE is used to _declare_ a constant variable that */
+  /* contains pointers to callback functions.                        */
+  /*                                                                 */
+  /* FT_CALLBACK_TABLE_DEF is used to _define_ a constant variable   */
+  /* that contains pointers to callback functions.                   */
+  /*                                                                 */
+  /*                                                                 */
+  /* Some 16bit compilers have to redefine these macros to insert    */
+  /* the infamous `_cdecl' or `__fastcall' declarations.             */
+  /*                                                                 */
+#ifndef FT_CALLBACK_DEF
+#ifdef __cplusplus
+#define FT_CALLBACK_DEF( x )  extern "C"  x
+#else
+#define FT_CALLBACK_DEF( x )  static  x
+#endif
+#endif /* FT_CALLBACK_DEF */
+
+#ifndef FT_CALLBACK_TABLE
+#ifdef __cplusplus
+#define FT_CALLBACK_TABLE      extern "C"
+#define FT_CALLBACK_TABLE_DEF  extern "C"
+#else
+#define FT_CALLBACK_TABLE      extern
+#define FT_CALLBACK_TABLE_DEF  /* nothing */
+#endif
+#endif /* FT_CALLBACK_TABLE */
+
+
+FT_END_HEADER
+
+
+#endif /* __FTCONFIG_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/config/ftheader.h b/darwin-x86_64/freetype/include/freetype2/config/ftheader.h
new file mode 100644
index 0000000..4906bc1
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/config/ftheader.h
@@ -0,0 +1,834 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftheader.h                                                             */
+/*                                                                         */
+/*    Build macros of the FreeType 2 library.                              */
+/*                                                                         */
+/*  Copyright 1996-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+#ifndef __FT_HEADER_H__
+#define __FT_HEADER_H__
+
+
+  /*@***********************************************************************/
+  /*                                                                       */
+  /* <Macro>                                                               */
+  /*    FT_BEGIN_HEADER                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This macro is used in association with @FT_END_HEADER in header    */
+  /*    files to ensure that the declarations within are properly          */
+  /*    encapsulated in an `extern "C" { .. }' block when included from a  */
+  /*    C++ compiler.                                                      */
+  /*                                                                       */
+#ifdef __cplusplus
+#define FT_BEGIN_HEADER  extern "C" {
+#else
+#define FT_BEGIN_HEADER  /* nothing */
+#endif
+
+
+  /*@***********************************************************************/
+  /*                                                                       */
+  /* <Macro>                                                               */
+  /*    FT_END_HEADER                                                      */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This macro is used in association with @FT_BEGIN_HEADER in header  */
+  /*    files to ensure that the declarations within are properly          */
+  /*    encapsulated in an `extern "C" { .. }' block when included from a  */
+  /*    C++ compiler.                                                      */
+  /*                                                                       */
+#ifdef __cplusplus
+#define FT_END_HEADER  }
+#else
+#define FT_END_HEADER  /* nothing */
+#endif
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Aliases for the FreeType 2 public and configuration files.            */
+  /*                                                                       */
+  /*************************************************************************/
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    header_file_macros                                                 */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    Header File Macros                                                 */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    Macro definitions used to #include specific header files.          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    The following macros are defined to the name of specific           */
+  /*    FreeType~2 header files.  They can be used directly in #include    */
+  /*    statements as in:                                                  */
+  /*                                                                       */
+  /*    {                                                                  */
+  /*      #include FT_FREETYPE_H                                           */
+  /*      #include FT_MULTIPLE_MASTERS_H                                   */
+  /*      #include FT_GLYPH_H                                              */
+  /*    }                                                                  */
+  /*                                                                       */
+  /*    There are several reasons why we are now using macros to name      */
+  /*    public header files.  The first one is that such macros are not    */
+  /*    limited to the infamous 8.3~naming rule required by DOS (and       */
+  /*    `FT_MULTIPLE_MASTERS_H' is a lot more meaningful than `ftmm.h').   */
+  /*                                                                       */
+  /*    The second reason is that it allows for more flexibility in the    */
+  /*    way FreeType~2 is installed on a given system.                     */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /* configuration files */
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_CONFIG_CONFIG_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing
+   *   FreeType~2 configuration data.
+   *
+   */
+#ifndef FT_CONFIG_CONFIG_H
+#define FT_CONFIG_CONFIG_H  <config/ftconfig.h>
+#endif
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_CONFIG_STANDARD_LIBRARY_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing
+   *   FreeType~2 interface to the standard C library functions.
+   *
+   */
+#ifndef FT_CONFIG_STANDARD_LIBRARY_H
+#define FT_CONFIG_STANDARD_LIBRARY_H  <config/ftstdlib.h>
+#endif
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_CONFIG_OPTIONS_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing
+   *   FreeType~2 project-specific configuration options.
+   *
+   */
+#ifndef FT_CONFIG_OPTIONS_H
+#define FT_CONFIG_OPTIONS_H  <config/ftoption.h>
+#endif
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_CONFIG_MODULES_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   list of FreeType~2 modules that are statically linked to new library
+   *   instances in @FT_Init_FreeType.
+   *
+   */
+#ifndef FT_CONFIG_MODULES_H
+#define FT_CONFIG_MODULES_H  <config/ftmodule.h>
+#endif
+
+  /* */
+
+  /* public headers */
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_FREETYPE_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   base FreeType~2 API.
+   *
+   */
+#define FT_FREETYPE_H  <freetype.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_ERRORS_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   list of FreeType~2 error codes (and messages).
+   *
+   *   It is included by @FT_FREETYPE_H.
+   *
+   */
+#define FT_ERRORS_H  <fterrors.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_MODULE_ERRORS_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   list of FreeType~2 module error offsets (and messages).
+   *
+   */
+#define FT_MODULE_ERRORS_H  <ftmoderr.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_SYSTEM_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 interface to low-level operations (i.e., memory management
+   *   and stream i/o).
+   *
+   *   It is included by @FT_FREETYPE_H.
+   *
+   */
+#define FT_SYSTEM_H  <ftsystem.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_IMAGE_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing type
+   *   definitions related to glyph images (i.e., bitmaps, outlines,
+   *   scan-converter parameters).
+   *
+   *   It is included by @FT_FREETYPE_H.
+   *
+   */
+#define FT_IMAGE_H  <ftimage.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_TYPES_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   basic data types defined by FreeType~2.
+   *
+   *   It is included by @FT_FREETYPE_H.
+   *
+   */
+#define FT_TYPES_H  <fttypes.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_LIST_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   list management API of FreeType~2.
+   *
+   *   (Most applications will never need to include this file.)
+   *
+   */
+#define FT_LIST_H  <ftlist.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_OUTLINE_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   scalable outline management API of FreeType~2.
+   *
+   */
+#define FT_OUTLINE_H  <ftoutln.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_SIZES_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   API which manages multiple @FT_Size objects per face.
+   *
+   */
+#define FT_SIZES_H  <ftsizes.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_MODULE_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   module management API of FreeType~2.
+   *
+   */
+#define FT_MODULE_H  <ftmodapi.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_RENDER_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   renderer module management API of FreeType~2.
+   *
+   */
+#define FT_RENDER_H  <ftrender.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_AUTOHINTER_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing
+   *   structures and macros related to the auto-hinting module.
+   *
+   */
+#define FT_AUTOHINTER_H  <ftautoh.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_CFF_DRIVER_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing
+   *   structures and macros related to the CFF driver module.
+   *
+   */
+#define FT_CFF_DRIVER_H  <ftcffdrv.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_TRUETYPE_DRIVER_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing
+   *   structures and macros related to the TrueType driver module.
+   *
+   */
+#define FT_TRUETYPE_DRIVER_H  <ftttdrv.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_TYPE1_TABLES_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   types and API specific to the Type~1 format.
+   *
+   */
+#define FT_TYPE1_TABLES_H  <t1tables.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_TRUETYPE_IDS_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   enumeration values which identify name strings, languages, encodings,
+   *   etc.  This file really contains a _large_ set of constant macro
+   *   definitions, taken from the TrueType and OpenType specifications.
+   *
+   */
+#define FT_TRUETYPE_IDS_H  <ttnameid.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_TRUETYPE_TABLES_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   types and API specific to the TrueType (as well as OpenType) format.
+   *
+   */
+#define FT_TRUETYPE_TABLES_H  <tttables.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_TRUETYPE_TAGS_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   definitions of TrueType four-byte `tags' which identify blocks in
+   *   SFNT-based font formats (i.e., TrueType and OpenType).
+   *
+   */
+#define FT_TRUETYPE_TAGS_H  <tttags.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_BDF_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   definitions of an API which accesses BDF-specific strings from a
+   *   face.
+   *
+   */
+#define FT_BDF_H  <ftbdf.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_CID_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   definitions of an API which access CID font information from a
+   *   face.
+   *
+   */
+#define FT_CID_H  <ftcid.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_GZIP_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   definitions of an API which supports gzip-compressed files.
+   *
+   */
+#define FT_GZIP_H  <ftgzip.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_LZW_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   definitions of an API which supports LZW-compressed files.
+   *
+   */
+#define FT_LZW_H  <ftlzw.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_BZIP2_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   definitions of an API which supports bzip2-compressed files.
+   *
+   */
+#define FT_BZIP2_H  <ftbzip2.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_WINFONTS_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   definitions of an API which supports Windows FNT files.
+   *
+   */
+#define FT_WINFONTS_H   <ftwinfnt.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_GLYPH_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   API of the optional glyph management component.
+   *
+   */
+#define FT_GLYPH_H  <ftglyph.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_BITMAP_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   API of the optional bitmap conversion component.
+   *
+   */
+#define FT_BITMAP_H  <ftbitmap.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_BBOX_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   API of the optional exact bounding box computation routines.
+   *
+   */
+#define FT_BBOX_H  <ftbbox.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_CACHE_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   API of the optional FreeType~2 cache sub-system.
+   *
+   */
+#define FT_CACHE_H  <ftcache.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_CACHE_IMAGE_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   `glyph image' API of the FreeType~2 cache sub-system.
+   *
+   *   It is used to define a cache for @FT_Glyph elements.  You can also
+   *   use the API defined in @FT_CACHE_SMALL_BITMAPS_H if you only need to
+   *   store small glyph bitmaps, as it will use less memory.
+   *
+   *   This macro is deprecated.  Simply include @FT_CACHE_H to have all
+   *   glyph image-related cache declarations.
+   *
+   */
+#define FT_CACHE_IMAGE_H  FT_CACHE_H
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_CACHE_SMALL_BITMAPS_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   `small bitmaps' API of the FreeType~2 cache sub-system.
+   *
+   *   It is used to define a cache for small glyph bitmaps in a relatively
+   *   memory-efficient way.  You can also use the API defined in
+   *   @FT_CACHE_IMAGE_H if you want to cache arbitrary glyph images,
+   *   including scalable outlines.
+   *
+   *   This macro is deprecated.  Simply include @FT_CACHE_H to have all
+   *   small bitmaps-related cache declarations.
+   *
+   */
+#define FT_CACHE_SMALL_BITMAPS_H  FT_CACHE_H
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_CACHE_CHARMAP_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   `charmap' API of the FreeType~2 cache sub-system.
+   *
+   *   This macro is deprecated.  Simply include @FT_CACHE_H to have all
+   *   charmap-based cache declarations.
+   *
+   */
+#define FT_CACHE_CHARMAP_H  FT_CACHE_H
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_MAC_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   Macintosh-specific FreeType~2 API.  The latter is used to access
+   *   fonts embedded in resource forks.
+   *
+   *   This header file must be explicitly included by client applications
+   *   compiled on the Mac (note that the base API still works though).
+   *
+   */
+#define FT_MAC_H  <ftmac.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_MULTIPLE_MASTERS_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   optional multiple-masters management API of FreeType~2.
+   *
+   */
+#define FT_MULTIPLE_MASTERS_H  <ftmm.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_SFNT_NAMES_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   optional FreeType~2 API which accesses embedded `name' strings in
+   *   SFNT-based font formats (i.e., TrueType and OpenType).
+   *
+   */
+#define FT_SFNT_NAMES_H  <ftsnames.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_OPENTYPE_VALIDATE_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   optional FreeType~2 API which validates OpenType tables (BASE, GDEF,
+   *   GPOS, GSUB, JSTF).
+   *
+   */
+#define FT_OPENTYPE_VALIDATE_H  <ftotval.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_GX_VALIDATE_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   optional FreeType~2 API which validates TrueTypeGX/AAT tables (feat,
+   *   mort, morx, bsln, just, kern, opbd, trak, prop).
+   *
+   */
+#define FT_GX_VALIDATE_H  <ftgxval.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_PFR_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 API which accesses PFR-specific data.
+   *
+   */
+#define FT_PFR_H  <ftpfr.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_STROKER_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 API which provides functions to stroke outline paths.
+   */
+#define FT_STROKER_H  <ftstroke.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_SYNTHESIS_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 API which performs artificial obliquing and emboldening.
+   */
+#define FT_SYNTHESIS_H  <ftsynth.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_FONT_FORMATS_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 API which provides functions specific to font formats.
+   */
+#define FT_FONT_FORMATS_H  <ftfntfmt.h>
+
+  /* deprecated */
+#define FT_XFREE86_H  FT_FONT_FORMATS_H
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_TRIGONOMETRY_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 API which performs trigonometric computations (e.g.,
+   *   cosines and arc tangents).
+   */
+#define FT_TRIGONOMETRY_H  <fttrigon.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_LCD_FILTER_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 API which performs color filtering for subpixel rendering.
+   */
+#define FT_LCD_FILTER_H  <ftlcdfil.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_UNPATENTED_HINTING_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 API which performs color filtering for subpixel rendering.
+   */
+#define FT_UNPATENTED_HINTING_H  <ttunpat.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_INCREMENTAL_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 API which performs color filtering for subpixel rendering.
+   */
+#define FT_INCREMENTAL_H  <ftincrem.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_GASP_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 API which returns entries from the TrueType GASP table.
+   */
+#define FT_GASP_H  <ftgasp.h>
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_ADVANCES_H
+   *
+   * @description:
+   *   A macro used in #include statements to name the file containing the
+   *   FreeType~2 API which returns individual and ranged glyph advances.
+   */
+#define FT_ADVANCES_H  <ftadvanc.h>
+
+
+  /* */
+
+#define FT_ERROR_DEFINITIONS_H  <fterrdef.h>
+
+
+  /* The internals of the cache sub-system are no longer exposed.  We */
+  /* default to FT_CACHE_H at the moment just in case, but we know of */
+  /* no rogue client that uses them.                                  */
+  /*                                                                  */
+#define FT_CACHE_MANAGER_H           <ftcache.h>
+#define FT_CACHE_INTERNAL_MRU_H      <ftcache.h>
+#define FT_CACHE_INTERNAL_MANAGER_H  <ftcache.h>
+#define FT_CACHE_INTERNAL_CACHE_H    <ftcache.h>
+#define FT_CACHE_INTERNAL_GLYPH_H    <ftcache.h>
+#define FT_CACHE_INTERNAL_IMAGE_H    <ftcache.h>
+#define FT_CACHE_INTERNAL_SBITS_H    <ftcache.h>
+
+
+#define FT_INCREMENTAL_H          <ftincrem.h>
+
+#define FT_TRUETYPE_UNPATENTED_H  <ttunpat.h>
+
+
+  /*
+   * Include internal headers definitions from <internal/...>
+   * only when building the library.
+   */
+#ifdef FT2_BUILD_LIBRARY
+#define  FT_INTERNAL_INTERNAL_H  <internal/internal.h>
+#include FT_INTERNAL_INTERNAL_H
+#endif /* FT2_BUILD_LIBRARY */
+
+
+#endif /* __FT2_BUILD_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/config/ftmodule.h b/darwin-x86_64/freetype/include/freetype2/config/ftmodule.h
new file mode 100644
index 0000000..84192be
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/config/ftmodule.h
@@ -0,0 +1,21 @@
+/* This is a generated file. */
+FT_USE_MODULE( FT_Driver_ClassRec, tt_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, t1_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, cff_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, t1cid_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, pfr_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, t42_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, winfnt_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, pcf_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, bdf_driver_class )
+FT_USE_MODULE( FT_Module_Class, sfnt_module_class )
+FT_USE_MODULE( FT_Module_Class, autofit_module_class )
+FT_USE_MODULE( FT_Module_Class, pshinter_module_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_raster1_renderer_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_smooth_renderer_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcd_renderer_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcdv_renderer_class )
+FT_USE_MODULE( FT_Module_Class, otv_module_class )
+FT_USE_MODULE( FT_Module_Class, psaux_module_class )
+FT_USE_MODULE( FT_Module_Class, psnames_module_class )
+/* EOF */
diff --git a/darwin-x86_64/freetype/include/freetype2/config/ftoption.h b/darwin-x86_64/freetype/include/freetype2/config/ftoption.h
new file mode 100644
index 0000000..1536c72
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/config/ftoption.h
@@ -0,0 +1,886 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftoption.h                                                             */
+/*                                                                         */
+/*    User-selectable configuration macros (specification only).           */
+/*                                                                         */
+/*  Copyright 1996-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTOPTION_H__
+#define __FTOPTION_H__
+
+
+#include <ft2build.h>
+
+
+FT_BEGIN_HEADER
+
+  /*************************************************************************/
+  /*                                                                       */
+  /*                 USER-SELECTABLE CONFIGURATION MACROS                  */
+  /*                                                                       */
+  /* This file contains the default configuration macro definitions for    */
+  /* a standard build of the FreeType library.  There are three ways to    */
+  /* use this file to build project-specific versions of the library:      */
+  /*                                                                       */
+  /*  - You can modify this file by hand, but this is not recommended in   */
+  /*    cases where you would like to build several versions of the        */
+  /*    library from a single source directory.                            */
+  /*                                                                       */
+  /*  - You can put a copy of this file in your build directory, more      */
+  /*    precisely in `$BUILD/config/ftoption.h', where `$BUILD' is the     */
+  /*    name of a directory that is included _before_ the FreeType include */
+  /*    path during compilation.                                           */
+  /*                                                                       */
+  /*    The default FreeType Makefiles and Jamfiles use the build          */
+  /*    directory `builds/<system>' by default, but you can easily change  */
+  /*    that for your own projects.                                        */
+  /*                                                                       */
+  /*  - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it    */
+  /*    slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to       */
+  /*    locate this file during the build.  For example,                   */
+  /*                                                                       */
+  /*      #define FT_CONFIG_OPTIONS_H  <myftoptions.h>                     */
+  /*      #include <config/ftheader.h>                                     */
+  /*                                                                       */
+  /*    will use `$BUILD/myftoptions.h' instead of this file for macro     */
+  /*    definitions.                                                       */
+  /*                                                                       */
+  /*    Note also that you can similarly pre-define the macro              */
+  /*    FT_CONFIG_MODULES_H used to locate the file listing of the modules */
+  /*    that are statically linked to the library at compile time.  By     */
+  /*    default, this file is <config/ftmodule.h>.                         */
+  /*                                                                       */
+  /* We highly recommend using the third method whenever possible.         */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /****                                                                 ****/
+  /**** G E N E R A L   F R E E T Y P E   2   C O N F I G U R A T I O N ****/
+  /****                                                                 ****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Uncomment the line below if you want to activate sub-pixel rendering  */
+  /* (a.k.a. LCD rendering, or ClearType) in this build of the library.    */
+  /*                                                                       */
+  /* Note that this feature is covered by several Microsoft patents        */
+  /* and should not be activated in any default build of the library.      */
+  /*                                                                       */
+  /* This macro has no impact on the FreeType API, only on its             */
+  /* _implementation_.  For example, using FT_RENDER_MODE_LCD when calling */
+  /* FT_Render_Glyph still generates a bitmap that is 3 times wider than   */
+  /* the original size in case this macro isn't defined; however, each     */
+  /* triplet of subpixels has R=G=B.                                       */
+  /*                                                                       */
+  /* This is done to allow FreeType clients to run unmodified, forcing     */
+  /* them to display normal gray-level anti-aliased glyphs.                */
+  /*                                                                       */
+/* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Many compilers provide a non-ANSI 64-bit data type that can be used   */
+  /* by FreeType to speed up some computations.  However, this will create */
+  /* some problems when compiling the library in strict ANSI mode.         */
+  /*                                                                       */
+  /* For this reason, the use of 64-bit integers is normally disabled when */
+  /* the __STDC__ macro is defined.  You can however disable this by       */
+  /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here.                 */
+  /*                                                                       */
+  /* For most compilers, this will only create compilation warnings when   */
+  /* building the library.                                                 */
+  /*                                                                       */
+  /* ObNote: The compiler-specific 64-bit integers are detected in the     */
+  /*         file `ftconfig.h' either statically or through the            */
+  /*         `configure' script on supported platforms.                    */
+  /*                                                                       */
+#undef FT_CONFIG_OPTION_FORCE_INT64
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* If this macro is defined, do not try to use an assembler version of   */
+  /* performance-critical functions (e.g. FT_MulFix).  You should only do  */
+  /* that to verify that the assembler function works properly, or to      */
+  /* execute benchmark tests of the various implementations.               */
+/* #define FT_CONFIG_OPTION_NO_ASSEMBLER */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* If this macro is defined, try to use an inlined assembler version of  */
+  /* the `FT_MulFix' function, which is a `hotspot' when loading and       */
+  /* hinting glyphs, and which should be executed as fast as possible.     */
+  /*                                                                       */
+  /* Note that if your compiler or CPU is not supported, this will default */
+  /* to the standard and portable implementation found in `ftcalc.c'.      */
+  /*                                                                       */
+#define FT_CONFIG_OPTION_INLINE_MULFIX
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* LZW-compressed file support.                                          */
+  /*                                                                       */
+  /*   FreeType now handles font files that have been compressed with the  */
+  /*   `compress' program.  This is mostly used to parse many of the PCF   */
+  /*   files that come with various X11 distributions.  The implementation */
+  /*   uses NetBSD's `zopen' to partially uncompress the file on the fly   */
+  /*   (see src/lzw/ftgzip.c).                                             */
+  /*                                                                       */
+  /*   Define this macro if you want to enable this `feature'.             */
+  /*                                                                       */
+#define FT_CONFIG_OPTION_USE_LZW
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Gzip-compressed file support.                                         */
+  /*                                                                       */
+  /*   FreeType now handles font files that have been compressed with the  */
+  /*   `gzip' program.  This is mostly used to parse many of the PCF files */
+  /*   that come with XFree86.  The implementation uses `zlib' to          */
+  /*   partially uncompress the file on the fly (see src/gzip/ftgzip.c).   */
+  /*                                                                       */
+  /*   Define this macro if you want to enable this `feature'.  See also   */
+  /*   the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below.                       */
+  /*                                                                       */
+#define FT_CONFIG_OPTION_USE_ZLIB
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* ZLib library selection                                                */
+  /*                                                                       */
+  /*   This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined.  */
+  /*   It allows FreeType's `ftgzip' component to link to the system's     */
+  /*   installation of the ZLib library.  This is useful on systems like   */
+  /*   Unix or VMS where it generally is already available.                */
+  /*                                                                       */
+  /*   If you let it undefined, the component will use its own copy        */
+  /*   of the zlib sources instead.  These have been modified to be        */
+  /*   included directly within the component and *not* export external    */
+  /*   function names.  This allows you to link any program with FreeType  */
+  /*   _and_ ZLib without linking conflicts.                               */
+  /*                                                                       */
+  /*   Do not #undef this macro here since the build system might define   */
+  /*   it for certain configurations only.                                 */
+  /*                                                                       */
+/* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Bzip2-compressed file support.                                        */
+  /*                                                                       */
+  /*   FreeType now handles font files that have been compressed with the  */
+  /*   `bzip2' program.  This is mostly used to parse many of the PCF      */
+  /*   files that come with XFree86.  The implementation uses `libbz2' to  */
+  /*   partially uncompress the file on the fly (see src/bzip2/ftbzip2.c). */
+  /*   Contrary to gzip, bzip2 currently is not included and need to use   */
+  /*   the system available bzip2 implementation.                          */
+  /*                                                                       */
+  /*   Define this macro if you want to enable this `feature'.             */
+  /*                                                                       */
+/* #define FT_CONFIG_OPTION_USE_BZIP2 */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define to disable the use of file stream functions and types, FILE,   */
+  /* fopen() etc.  Enables the use of smaller system libraries on embedded */
+  /* systems that have multiple system libraries, some with or without     */
+  /* file stream support, in the cases where file stream support is not    */
+  /* necessary such as memory loading of font files.                       */
+  /*                                                                       */
+/* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* PNG bitmap support.                                                   */
+  /*                                                                       */
+  /*   FreeType now handles loading color bitmap glyphs in the PNG format. */
+  /*   This requires help from the external libpng library.  Uncompressed  */
+  /*   color bitmaps do not need any external libraries and will be        */
+  /*   supported regardless of this configuration.                         */
+  /*                                                                       */
+  /*   Define this macro if you want to enable this `feature'.             */
+  /*                                                                       */
+/* #define FT_CONFIG_OPTION_USE_PNG */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* HarfBuzz support.                                                     */
+  /*                                                                       */
+  /*   FreeType uses the HarfBuzz library to improve auto-hinting of       */
+  /*   OpenType fonts.  If available, many glyphs not directly addressable */
+  /*   by a font's character map will be hinted also.                      */
+  /*                                                                       */
+  /*   Define this macro if you want to enable this `feature'.             */
+  /*                                                                       */
+/* #define FT_CONFIG_OPTION_USE_HARFBUZZ */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* DLL export compilation                                                */
+  /*                                                                       */
+  /*   When compiling FreeType as a DLL, some systems/compilers need a     */
+  /*   special keyword in front OR after the return type of function       */
+  /*   declarations.                                                       */
+  /*                                                                       */
+  /*   Two macros are used within the FreeType source code to define       */
+  /*   exported library functions: FT_EXPORT and FT_EXPORT_DEF.            */
+  /*                                                                       */
+  /*     FT_EXPORT( return_type )                                          */
+  /*                                                                       */
+  /*       is used in a function declaration, as in                        */
+  /*                                                                       */
+  /*         FT_EXPORT( FT_Error )                                         */
+  /*         FT_Init_FreeType( FT_Library*  alibrary );                    */
+  /*                                                                       */
+  /*                                                                       */
+  /*     FT_EXPORT_DEF( return_type )                                      */
+  /*                                                                       */
+  /*       is used in a function definition, as in                         */
+  /*                                                                       */
+  /*         FT_EXPORT_DEF( FT_Error )                                     */
+  /*         FT_Init_FreeType( FT_Library*  alibrary )                     */
+  /*         {                                                             */
+  /*           ... some code ...                                           */
+  /*           return FT_Err_Ok;                                           */
+  /*         }                                                             */
+  /*                                                                       */
+  /*   You can provide your own implementation of FT_EXPORT and            */
+  /*   FT_EXPORT_DEF here if you want.  If you leave them undefined, they  */
+  /*   will be later automatically defined as `extern return_type' to      */
+  /*   allow normal compilation.                                           */
+  /*                                                                       */
+  /*   Do not #undef these macros here since the build system might define */
+  /*   them for certain configurations only.                               */
+  /*                                                                       */
+/* #define FT_EXPORT(x)      extern x */
+/* #define FT_EXPORT_DEF(x)  x */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Glyph Postscript Names handling                                       */
+  /*                                                                       */
+  /*   By default, FreeType 2 is compiled with the `psnames' module.  This */
+  /*   module is in charge of converting a glyph name string into a        */
+  /*   Unicode value, or return a Macintosh standard glyph name for the    */
+  /*   use with the TrueType `post' table.                                 */
+  /*                                                                       */
+  /*   Undefine this macro if you do not want `psnames' compiled in your   */
+  /*   build of FreeType.  This has the following effects:                 */
+  /*                                                                       */
+  /*   - The TrueType driver will provide its own set of glyph names,      */
+  /*     if you build it to support postscript names in the TrueType       */
+  /*     `post' table.                                                     */
+  /*                                                                       */
+  /*   - The Type 1 driver will not be able to synthesize a Unicode        */
+  /*     charmap out of the glyphs found in the fonts.                     */
+  /*                                                                       */
+  /*   You would normally undefine this configuration macro when building  */
+  /*   a version of FreeType that doesn't contain a Type 1 or CFF driver.  */
+  /*                                                                       */
+#define FT_CONFIG_OPTION_POSTSCRIPT_NAMES
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Postscript Names to Unicode Values support                            */
+  /*                                                                       */
+  /*   By default, FreeType 2 is built with the `PSNames' module compiled  */
+  /*   in.  Among other things, the module is used to convert a glyph name */
+  /*   into a Unicode value.  This is especially useful in order to        */
+  /*   synthesize on the fly a Unicode charmap from the CFF/Type 1 driver  */
+  /*   through a big table named the `Adobe Glyph List' (AGL).             */
+  /*                                                                       */
+  /*   Undefine this macro if you do not want the Adobe Glyph List         */
+  /*   compiled in your `PSNames' module.  The Type 1 driver will not be   */
+  /*   able to synthesize a Unicode charmap out of the glyphs found in the */
+  /*   fonts.                                                              */
+  /*                                                                       */
+#define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Support for Mac fonts                                                 */
+  /*                                                                       */
+  /*   Define this macro if you want support for outline fonts in Mac      */
+  /*   format (mac dfont, mac resource, macbinary containing a mac         */
+  /*   resource) on non-Mac platforms.                                     */
+  /*                                                                       */
+  /*   Note that the `FOND' resource isn't checked.                        */
+  /*                                                                       */
+#define FT_CONFIG_OPTION_MAC_FONTS
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Guessing methods to access embedded resource forks                    */
+  /*                                                                       */
+  /*   Enable extra Mac fonts support on non-Mac platforms (e.g.           */
+  /*   GNU/Linux).                                                         */
+  /*                                                                       */
+  /*   Resource forks which include fonts data are stored sometimes in     */
+  /*   locations which users or developers don't expected.  In some cases, */
+  /*   resource forks start with some offset from the head of a file.  In  */
+  /*   other cases, the actual resource fork is stored in file different   */
+  /*   from what the user specifies.  If this option is activated,         */
+  /*   FreeType tries to guess whether such offsets or different file      */
+  /*   names must be used.                                                 */
+  /*                                                                       */
+  /*   Note that normal, direct access of resource forks is controlled via */
+  /*   the FT_CONFIG_OPTION_MAC_FONTS option.                              */
+  /*                                                                       */
+#ifdef FT_CONFIG_OPTION_MAC_FONTS
+#define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK
+#endif
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Allow the use of FT_Incremental_Interface to load typefaces that      */
+  /* contain no glyph data, but supply it via a callback function.         */
+  /* This is required by clients supporting document formats which         */
+  /* supply font data incrementally as the document is parsed, such        */
+  /* as the Ghostscript interpreter for the PostScript language.           */
+  /*                                                                       */
+#define FT_CONFIG_OPTION_INCREMENTAL
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* The size in bytes of the render pool used by the scan-line converter  */
+  /* to do all of its work.                                                */
+  /*                                                                       */
+#define FT_RENDER_POOL_SIZE  16384L
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* FT_MAX_MODULES                                                        */
+  /*                                                                       */
+  /*   The maximum number of modules that can be registered in a single    */
+  /*   FreeType library object.  32 is the default.                        */
+  /*                                                                       */
+#define FT_MAX_MODULES  32
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Debug level                                                           */
+  /*                                                                       */
+  /*   FreeType can be compiled in debug or trace mode.  In debug mode,    */
+  /*   errors are reported through the `ftdebug' component.  In trace      */
+  /*   mode, additional messages are sent to the standard output during    */
+  /*   execution.                                                          */
+  /*                                                                       */
+  /*   Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode.     */
+  /*   Define FT_DEBUG_LEVEL_TRACE to build it in trace mode.              */
+  /*                                                                       */
+  /*   Don't define any of these macros to compile in `release' mode!      */
+  /*                                                                       */
+  /*   Do not #undef these macros here since the build system might define */
+  /*   them for certain configurations only.                               */
+  /*                                                                       */
+/* #define FT_DEBUG_LEVEL_ERROR */
+/* #define FT_DEBUG_LEVEL_TRACE */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Autofitter debugging                                                  */
+  /*                                                                       */
+  /*   If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to     */
+  /*   control the autofitter behaviour for debugging purposes with global */
+  /*   boolean variables (consequently, you should *never* enable this     */
+  /*   while compiling in `release' mode):                                 */
+  /*                                                                       */
+  /*     _af_debug_disable_horz_hints                                      */
+  /*     _af_debug_disable_vert_hints                                      */
+  /*     _af_debug_disable_blue_hints                                      */
+  /*                                                                       */
+  /*   Additionally, the following functions provide dumps of various      */
+  /*   internal autofit structures to stdout (using `printf'):             */
+  /*                                                                       */
+  /*     af_glyph_hints_dump_points                                        */
+  /*     af_glyph_hints_dump_segments                                      */
+  /*     af_glyph_hints_dump_edges                                         */
+  /*     af_glyph_hints_get_num_segments                                   */
+  /*     af_glyph_hints_get_segment_offset                                 */
+  /*                                                                       */
+  /*   As an argument, they use another global variable:                   */
+  /*                                                                       */
+  /*     _af_debug_hints                                                   */
+  /*                                                                       */
+  /*   Please have a look at the `ftgrid' demo program to see how those    */
+  /*   variables and macros should be used.                                */
+  /*                                                                       */
+  /*   Do not #undef these macros here since the build system might define */
+  /*   them for certain configurations only.                               */
+  /*                                                                       */
+/* #define FT_DEBUG_AUTOFIT */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Memory Debugging                                                      */
+  /*                                                                       */
+  /*   FreeType now comes with an integrated memory debugger that is       */
+  /*   capable of detecting simple errors like memory leaks or double      */
+  /*   deletes.  To compile it within your build of the library, you       */
+  /*   should define FT_DEBUG_MEMORY here.                                 */
+  /*                                                                       */
+  /*   Note that the memory debugger is only activated at runtime when     */
+  /*   when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */
+  /*                                                                       */
+  /*   Do not #undef this macro here since the build system might define   */
+  /*   it for certain configurations only.                                 */
+  /*                                                                       */
+/* #define FT_DEBUG_MEMORY */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Module errors                                                         */
+  /*                                                                       */
+  /*   If this macro is set (which is _not_ the default), the higher byte  */
+  /*   of an error code gives the module in which the error has occurred,  */
+  /*   while the lower byte is the real error code.                        */
+  /*                                                                       */
+  /*   Setting this macro makes sense for debugging purposes only, since   */
+  /*   it would break source compatibility of certain programs that use    */
+  /*   FreeType 2.                                                         */
+  /*                                                                       */
+  /*   More details can be found in the files ftmoderr.h and fterrors.h.   */
+  /*                                                                       */
+#undef FT_CONFIG_OPTION_USE_MODULE_ERRORS
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Position Independent Code                                             */
+  /*                                                                       */
+  /*   If this macro is set (which is _not_ the default), FreeType2 will   */
+  /*   avoid creating constants that require address fixups.  Instead the  */
+  /*   constants will be moved into a struct and additional intialization  */
+  /*   code will be used.                                                  */
+  /*                                                                       */
+  /*   Setting this macro is needed for systems that prohibit address      */
+  /*   fixups, such as BREW.                                               */
+  /*                                                                       */
+/* #define FT_CONFIG_OPTION_PIC */
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /****                                                                 ****/
+  /****        S F N T   D R I V E R    C O N F I G U R A T I O N       ****/
+  /****                                                                 ****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support       */
+  /* embedded bitmaps in all formats using the SFNT module (namely         */
+  /* TrueType & OpenType).                                                 */
+  /*                                                                       */
+#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to    */
+  /* load and enumerate the glyph Postscript names in a TrueType or        */
+  /* OpenType file.                                                        */
+  /*                                                                       */
+  /* Note that when you do not compile the `PSNames' module by undefining  */
+  /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will   */
+  /* contain additional code used to read the PS Names table from a font.  */
+  /*                                                                       */
+  /* (By default, the module uses `PSNames' to extract glyph names.)       */
+  /*                                                                       */
+#define TT_CONFIG_OPTION_POSTSCRIPT_NAMES
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to       */
+  /* access the internal name table in a SFNT-based format like TrueType   */
+  /* or OpenType.  The name table contains various strings used to         */
+  /* describe the font, like family name, copyright, version, etc.  It     */
+  /* does not contain any glyph name though.                               */
+  /*                                                                       */
+  /* Accessing SFNT names is done through the functions declared in        */
+  /* `ftsnames.h'.                                                         */
+  /*                                                                       */
+#define TT_CONFIG_OPTION_SFNT_NAMES
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* TrueType CMap support                                                 */
+  /*                                                                       */
+  /*   Here you can fine-tune which TrueType CMap table format shall be    */
+  /*   supported.                                                          */
+#define TT_CONFIG_CMAP_FORMAT_0
+#define TT_CONFIG_CMAP_FORMAT_2
+#define TT_CONFIG_CMAP_FORMAT_4
+#define TT_CONFIG_CMAP_FORMAT_6
+#define TT_CONFIG_CMAP_FORMAT_8
+#define TT_CONFIG_CMAP_FORMAT_10
+#define TT_CONFIG_CMAP_FORMAT_12
+#define TT_CONFIG_CMAP_FORMAT_13
+#define TT_CONFIG_CMAP_FORMAT_14
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /****                                                                 ****/
+  /****    T R U E T Y P E   D R I V E R    C O N F I G U R A T I O N   ****/
+  /****                                                                 ****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile   */
+  /* a bytecode interpreter in the TrueType driver.                        */
+  /*                                                                       */
+  /* By undefining this, you will only compile the code necessary to load  */
+  /* TrueType glyphs without hinting.                                      */
+  /*                                                                       */
+  /*   Do not #undef this macro here, since the build system might         */
+  /*   define it for certain configurations only.                          */
+  /*                                                                       */
+#define TT_CONFIG_OPTION_BYTECODE_INTERPRETER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile       */
+  /* EXPERIMENTAL subpixel hinting support into the TrueType driver.  This */
+  /* replaces the native TrueType hinting mechanism when anything but      */
+  /* FT_RENDER_MODE_MONO is requested.                                     */
+  /*                                                                       */
+  /* Enabling this causes the TrueType driver to ignore instructions under */
+  /* certain conditions.  This is done in accordance with the guide here,  */
+  /* with some minor differences:                                          */
+  /*                                                                       */
+  /*  http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx */
+  /*                                                                       */
+  /* By undefining this, you only compile the code necessary to hint       */
+  /* TrueType glyphs with native TT hinting.                               */
+  /*                                                                       */
+  /*   This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be    */
+  /*   defined.                                                            */
+  /*                                                                       */
+/* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* If you define TT_CONFIG_OPTION_UNPATENTED_HINTING, a special version  */
+  /* of the TrueType bytecode interpreter is used that doesn't implement   */
+  /* any of the patented opcodes and algorithms.  The patents related to   */
+  /* TrueType hinting have expired worldwide since May 2010; this option   */
+  /* is now deprecated.                                                    */
+  /*                                                                       */
+  /* Note that the TT_CONFIG_OPTION_UNPATENTED_HINTING macro is *ignored*  */
+  /* if you define TT_CONFIG_OPTION_BYTECODE_INTERPRETER; in other words,  */
+  /* either define TT_CONFIG_OPTION_BYTECODE_INTERPRETER or                */
+  /* TT_CONFIG_OPTION_UNPATENTED_HINTING but not both at the same time.    */
+  /*                                                                       */
+  /* This macro is only useful for a small number of font files (mostly    */
+  /* for Asian scripts) that require bytecode interpretation to properly   */
+  /* load glyphs.  For all other fonts, this produces unpleasant results,  */
+  /* thus the unpatented interpreter is never used to load glyphs from     */
+  /* TrueType fonts unless one of the following two options is used.       */
+  /*                                                                       */
+  /*   - The unpatented interpreter is explicitly activated by the user    */
+  /*     through the FT_PARAM_TAG_UNPATENTED_HINTING parameter tag         */
+  /*     when opening the FT_Face.                                         */
+  /*                                                                       */
+  /*   - FreeType detects that the FT_Face corresponds to one of the       */
+  /*     `trick' fonts (e.g., `Mingliu') it knows about.  The font engine  */
+  /*     contains a hard-coded list of font names and other matching       */
+  /*     parameters (see function `tt_face_init' in file                   */
+  /*     `src/truetype/ttobjs.c').                                         */
+  /*                                                                       */
+  /* Here a sample code snippet for using FT_PARAM_TAG_UNPATENTED_HINTING. */
+  /*                                                                       */
+  /*   {                                                                   */
+  /*     FT_Parameter  parameter;                                          */
+  /*     FT_Open_Args  open_args;                                          */
+  /*                                                                       */
+  /*                                                                       */
+  /*     parameter.tag = FT_PARAM_TAG_UNPATENTED_HINTING;                  */
+  /*                                                                       */
+  /*     open_args.flags      = FT_OPEN_PATHNAME | FT_OPEN_PARAMS;         */
+  /*     open_args.pathname   = my_font_pathname;                          */
+  /*     open_args.num_params = 1;                                         */
+  /*     open_args.params     = &parameter;                                */
+  /*                                                                       */
+  /*     error = FT_Open_Face( library, &open_args, index, &face );        */
+  /*     ...                                                               */
+  /*   }                                                                   */
+  /*                                                                       */
+/* #define TT_CONFIG_OPTION_UNPATENTED_HINTING */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the        */
+  /* TrueType glyph loader to use Apple's definition of how to handle      */
+  /* component offsets in composite glyphs.                                */
+  /*                                                                       */
+  /* Apple and MS disagree on the default behavior of component offsets    */
+  /* in composites.  Apple says that they should be scaled by the scaling  */
+  /* factors in the transformation matrix (roughly, it's more complex)     */
+  /* while MS says they should not.  OpenType defines two bits in the      */
+  /* composite flags array which can be used to disambiguate, but old      */
+  /* fonts will not have them.                                             */
+  /*                                                                       */
+  /*   http://www.microsoft.com/typography/otspec/glyf.htm                 */
+  /*   https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6glyf.html */
+  /*                                                                       */
+#undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include         */
+  /* support for Apple's distortable font technology (fvar, gvar, cvar,    */
+  /* and avar tables).  This has many similarities to Type 1 Multiple      */
+  /* Masters support.                                                      */
+  /*                                                                       */
+#define TT_CONFIG_OPTION_GX_VAR_SUPPORT
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define TT_CONFIG_OPTION_BDF if you want to include support for        */
+  /* an embedded `BDF ' table within SFNT-based bitmap formats.            */
+  /*                                                                       */
+#define TT_CONFIG_OPTION_BDF
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /****                                                                 ****/
+  /****      T Y P E 1   D R I V E R    C O N F I G U R A T I O N       ****/
+  /****                                                                 ****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and       */
+  /* arrays in the Type 1 stream (see t1load.c).  A minimum of 4 is        */
+  /* required.                                                             */
+  /*                                                                       */
+#define T1_MAX_DICT_DEPTH  5
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine   */
+  /* calls during glyph loading.                                           */
+  /*                                                                       */
+#define T1_MAX_SUBRS_CALLS  16
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity.  A     */
+  /* minimum of 16 is required.                                            */
+  /*                                                                       */
+  /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */
+  /*                                                                       */
+#define T1_MAX_CHARSTRINGS_OPERANDS  256
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define this configuration macro if you want to prevent the            */
+  /* compilation of `t1afm', which is in charge of reading Type 1 AFM      */
+  /* files into an existing face.  Note that if set, the T1 driver will be */
+  /* unable to produce kerning distances.                                  */
+  /*                                                                       */
+#undef T1_CONFIG_OPTION_NO_AFM
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Define this configuration macro if you want to prevent the            */
+  /* compilation of the Multiple Masters font support in the Type 1        */
+  /* driver.                                                               */
+  /*                                                                       */
+#undef T1_CONFIG_OPTION_NO_MM_SUPPORT
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /****                                                                 ****/
+  /****         C F F   D R I V E R    C O N F I G U R A T I O N        ****/
+  /****                                                                 ****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Using CFF_CONFIG_OPTION_DARKENING_PARAMETER_{X,Y}{1,2,3,4} it is      */
+  /* possible to set up the default values of the four control points that */
+  /* define the stem darkening behaviour of the (new) CFF engine.  For     */
+  /* more details please read the documentation of the                     */
+  /* `darkening-parameters' property of the cff driver module (file        */
+  /* `ftcffdrv.h'), which allows the control at run-time.                  */
+  /*                                                                       */
+  /* Do *not* undefine these macros!                                       */
+  /*                                                                       */
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1   500
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1   400
+
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2  1000
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2   275
+
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3  1667
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3   275
+
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4  2333
+#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4     0
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* CFF_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe CFF       */
+  /* engine gets compiled into FreeType.  If defined, it is possible to    */
+  /* switch between the two engines using the `hinting-engine' property of */
+  /* the cff driver module.                                                */
+  /*                                                                       */
+/* #define CFF_CONFIG_OPTION_OLD_ENGINE */
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /****                                                                 ****/
+  /****    A U T O F I T   M O D U L E    C O N F I G U R A T I O N     ****/
+  /****                                                                 ****/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Compile autofit module with CJK (Chinese, Japanese, Korean) script    */
+  /* support.                                                              */
+  /*                                                                       */
+#define AF_CONFIG_OPTION_CJK
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Compile autofit module with Indic script support.                     */
+  /*                                                                       */
+#define AF_CONFIG_OPTION_INDIC
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Compile autofit module with warp hinting.  The idea of the warping    */
+  /* code is to slightly scale and shift a glyph within a single dimension */
+  /* so that as much of its segments are aligned (more or less) on the     */
+  /* grid.  To find out the optimal scaling and shifting value, various    */
+  /* parameter combinations are tried and scored.                          */
+  /*                                                                       */
+  /* This experimental option is active only if the rendering mode is      */
+  /* FT_RENDER_MODE_LIGHT; you can switch warping on and off with the      */
+  /* `warping' property of the auto-hinter (see file `ftautoh.h' for more  */
+  /* information; by default it is switched off).                          */
+  /*                                                                       */
+#define AF_CONFIG_OPTION_USE_WARPER
+
+  /* */
+
+
+  /*
+   * This macro is obsolete.  Support has been removed in FreeType
+   * version 2.5.
+   */
+/* #define FT_CONFIG_OPTION_OLD_INTERNALS */
+
+
+  /*
+   * This macro is defined if either unpatented or native TrueType
+   * hinting is requested by the definitions above.
+   */
+#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
+#define  TT_USE_BYTECODE_INTERPRETER
+#undef   TT_CONFIG_OPTION_UNPATENTED_HINTING
+#elif defined TT_CONFIG_OPTION_UNPATENTED_HINTING
+#define  TT_USE_BYTECODE_INTERPRETER
+#endif
+
+
+  /*
+   * Check CFF darkening parameters.  The checks are the same as in function
+   * `cff_property_set' in file `cffdrivr.c'.
+   */
+#if CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 < 0   || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 < 0   || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 < 0   || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 < 0   || \
+                                                      \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 < 0   || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 < 0   || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 < 0   || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 < 0   || \
+                                                      \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 >        \
+      CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2     || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 >        \
+      CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3     || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 >        \
+      CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4     || \
+                                                      \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 > 500 || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 > 500 || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 > 500 || \
+    CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 > 500
+#error "Invalid CFF darkening parameters!"
+#endif
+
+FT_END_HEADER
+
+
+#endif /* __FTOPTION_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/config/ftstdlib.h b/darwin-x86_64/freetype/include/freetype2/config/ftstdlib.h
new file mode 100644
index 0000000..8ef43c0
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/config/ftstdlib.h
@@ -0,0 +1,173 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftstdlib.h                                                             */
+/*                                                                         */
+/*    ANSI-specific library and header configuration file (specification   */
+/*    only).                                                               */
+/*                                                                         */
+/*  Copyright 2002-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* This file is used to group all #includes to the ANSI C library that   */
+  /* FreeType normally requires.  It also defines macros to rename the     */
+  /* standard functions within the FreeType source code.                   */
+  /*                                                                       */
+  /* Load a file which defines __FTSTDLIB_H__ before this one to override  */
+  /* it.                                                                   */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+#ifndef __FTSTDLIB_H__
+#define __FTSTDLIB_H__
+
+
+#include <stddef.h>
+
+#define ft_ptrdiff_t  ptrdiff_t
+
+
+  /**********************************************************************/
+  /*                                                                    */
+  /*                           integer limits                           */
+  /*                                                                    */
+  /* UINT_MAX and ULONG_MAX are used to automatically compute the size  */
+  /* of `int' and `long' in bytes at compile-time.  So far, this works  */
+  /* for all platforms the library has been tested on.                  */
+  /*                                                                    */
+  /* Note that on the extremely rare platforms that do not provide      */
+  /* integer types that are _exactly_ 16 and 32 bits wide (e.g. some    */
+  /* old Crays where `int' is 36 bits), we do not make any guarantee    */
+  /* about the correct behaviour of FT2 with all fonts.                 */
+  /*                                                                    */
+  /* In these case, `ftconfig.h' will refuse to compile anyway with a   */
+  /* message like `couldn't find 32-bit type' or something similar.     */
+  /*                                                                    */
+  /**********************************************************************/
+
+
+#include <limits.h>
+
+#define FT_CHAR_BIT    CHAR_BIT
+#define FT_USHORT_MAX  USHRT_MAX
+#define FT_INT_MAX     INT_MAX
+#define FT_INT_MIN     INT_MIN
+#define FT_UINT_MAX    UINT_MAX
+#define FT_ULONG_MAX   ULONG_MAX
+
+
+  /**********************************************************************/
+  /*                                                                    */
+  /*                 character and string processing                    */
+  /*                                                                    */
+  /**********************************************************************/
+
+
+#include <string.h>
+
+#define ft_memchr   memchr
+#define ft_memcmp   memcmp
+#define ft_memcpy   memcpy
+#define ft_memmove  memmove
+#define ft_memset   memset
+#define ft_strcat   strcat
+#define ft_strcmp   strcmp
+#define ft_strcpy   strcpy
+#define ft_strlen   strlen
+#define ft_strncmp  strncmp
+#define ft_strncpy  strncpy
+#define ft_strrchr  strrchr
+#define ft_strstr   strstr
+
+
+  /**********************************************************************/
+  /*                                                                    */
+  /*                           file handling                            */
+  /*                                                                    */
+  /**********************************************************************/
+
+
+#include <stdio.h>
+
+#define FT_FILE     FILE
+#define ft_fclose   fclose
+#define ft_fopen    fopen
+#define ft_fread    fread
+#define ft_fseek    fseek
+#define ft_ftell    ftell
+#define ft_sprintf  sprintf
+
+
+  /**********************************************************************/
+  /*                                                                    */
+  /*                             sorting                                */
+  /*                                                                    */
+  /**********************************************************************/
+
+
+#include <stdlib.h>
+
+#define ft_qsort  qsort
+
+
+  /**********************************************************************/
+  /*                                                                    */
+  /*                        memory allocation                           */
+  /*                                                                    */
+  /**********************************************************************/
+
+
+#define ft_scalloc   calloc
+#define ft_sfree     free
+#define ft_smalloc   malloc
+#define ft_srealloc  realloc
+
+
+  /**********************************************************************/
+  /*                                                                    */
+  /*                          miscellaneous                             */
+  /*                                                                    */
+  /**********************************************************************/
+
+
+#define ft_atol  atol
+
+
+  /**********************************************************************/
+  /*                                                                    */
+  /*                         execution control                          */
+  /*                                                                    */
+  /**********************************************************************/
+
+
+#include <setjmp.h>
+
+#define ft_jmp_buf     jmp_buf  /* note: this cannot be a typedef since */
+                                /*       jmp_buf is defined as a macro  */
+                                /*       on certain platforms           */
+
+#define ft_longjmp     longjmp
+#define ft_setjmp( b ) setjmp( *(ft_jmp_buf*) &(b) ) /* same thing here */
+
+
+  /* the following is only used for debugging purposes, i.e., if */
+  /* FT_DEBUG_LEVEL_ERROR or FT_DEBUG_LEVEL_TRACE are defined    */
+
+#include <stdarg.h>
+
+
+#endif /* __FTSTDLIB_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/freetype.h b/darwin-x86_64/freetype/include/freetype2/freetype.h
new file mode 100644
index 0000000..bca93e5
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/freetype.h
@@ -0,0 +1,4069 @@
+/***************************************************************************/
+/*                                                                         */
+/*  freetype.h                                                             */
+/*                                                                         */
+/*    FreeType high-level API and common types (specification only).       */
+/*                                                                         */
+/*  Copyright 1996-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FREETYPE_H__
+#define __FREETYPE_H__
+
+
+#ifndef FT_FREETYPE_H
+#error "`ft2build.h' hasn't been included yet!"
+#error "Please always use macros to include FreeType header files."
+#error "Example:"
+#error "  #include <ft2build.h>"
+#error "  #include FT_FREETYPE_H"
+#endif
+
+
+#include <ft2build.h>
+#include FT_CONFIG_CONFIG_H
+#include FT_TYPES_H
+#include FT_ERRORS_H
+
+
+FT_BEGIN_HEADER
+
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    header_inclusion                                                   */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    FreeType's header inclusion scheme                                 */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    How client applications should include FreeType header files.      */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    To be as flexible as possible (and for historical reasons),        */
+  /*    FreeType uses a very special inclusion scheme to load header       */
+  /*    files, for example                                                 */
+  /*                                                                       */
+  /*    {                                                                  */
+  /*      #include <ft2build.h>                                            */
+  /*                                                                       */
+  /*      #include FT_FREETYPE_H                                           */
+  /*      #include FT_OUTLINE_H                                            */
+  /*    }                                                                  */
+  /*                                                                       */
+  /*    A compiler and its preprocessor only needs an include path to find */
+  /*    the file `ft2build.h'; the exact locations and names of the other  */
+  /*    FreeType header files are hidden by preprocessor macro names,      */
+  /*    loaded by `ft2build.h'.  The API documentation always gives the    */
+  /*    header macro name needed for a particular function.                */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    user_allocation                                                    */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    User allocation                                                    */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    How client applications should allocate FreeType data structures.  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    FreeType assumes that structures allocated by the user and passed  */
+  /*    as arguments are zeroed out except for the actual data.  In other  */
+  /*    words, it is recommended to use `calloc' (or variants of it)       */
+  /*    instead of `malloc' for allocation.                                */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*                                                                       */
+  /*                        B A S I C   T Y P E S                          */
+  /*                                                                       */
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    base_interface                                                     */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    Base Interface                                                     */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    The FreeType~2 base font interface.                                */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section describes the most important public high-level API    */
+  /*    functions of FreeType~2.                                           */
+  /*                                                                       */
+  /* <Order>                                                               */
+  /*    FT_Library                                                         */
+  /*    FT_Face                                                            */
+  /*    FT_Size                                                            */
+  /*    FT_GlyphSlot                                                       */
+  /*    FT_CharMap                                                         */
+  /*    FT_Encoding                                                        */
+  /*    FT_ENC_TAG                                                         */
+  /*                                                                       */
+  /*    FT_FaceRec                                                         */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_SCALABLE                                              */
+  /*    FT_FACE_FLAG_FIXED_SIZES                                           */
+  /*    FT_FACE_FLAG_FIXED_WIDTH                                           */
+  /*    FT_FACE_FLAG_HORIZONTAL                                            */
+  /*    FT_FACE_FLAG_VERTICAL                                              */
+  /*    FT_FACE_FLAG_COLOR                                                 */
+  /*    FT_FACE_FLAG_SFNT                                                  */
+  /*    FT_FACE_FLAG_CID_KEYED                                             */
+  /*    FT_FACE_FLAG_TRICKY                                                */
+  /*    FT_FACE_FLAG_KERNING                                               */
+  /*    FT_FACE_FLAG_MULTIPLE_MASTERS                                      */
+  /*    FT_FACE_FLAG_GLYPH_NAMES                                           */
+  /*    FT_FACE_FLAG_EXTERNAL_STREAM                                       */
+  /*    FT_FACE_FLAG_HINTER                                                */
+  /*    FT_FACE_FLAG_TRICKY                                                */
+  /*                                                                       */
+  /*    FT_HAS_HORIZONTAL                                                  */
+  /*    FT_HAS_VERTICAL                                                    */
+  /*    FT_HAS_KERNING                                                     */
+  /*    FT_HAS_FIXED_SIZES                                                 */
+  /*    FT_HAS_GLYPH_NAMES                                                 */
+  /*    FT_HAS_MULTIPLE_MASTERS                                            */
+  /*    FT_HAS_COLOR                                                       */
+  /*                                                                       */
+  /*    FT_IS_SFNT                                                         */
+  /*    FT_IS_SCALABLE                                                     */
+  /*    FT_IS_FIXED_WIDTH                                                  */
+  /*    FT_IS_CID_KEYED                                                    */
+  /*    FT_IS_TRICKY                                                       */
+  /*                                                                       */
+  /*    FT_STYLE_FLAG_BOLD                                                 */
+  /*    FT_STYLE_FLAG_ITALIC                                               */
+  /*                                                                       */
+  /*    FT_SizeRec                                                         */
+  /*    FT_Size_Metrics                                                    */
+  /*                                                                       */
+  /*    FT_GlyphSlotRec                                                    */
+  /*    FT_Glyph_Metrics                                                   */
+  /*    FT_SubGlyph                                                        */
+  /*                                                                       */
+  /*    FT_Bitmap_Size                                                     */
+  /*                                                                       */
+  /*    FT_Init_FreeType                                                   */
+  /*    FT_Done_FreeType                                                   */
+  /*                                                                       */
+  /*    FT_New_Face                                                        */
+  /*    FT_Done_Face                                                       */
+  /*    FT_Reference_Face                                                  */
+  /*    FT_New_Memory_Face                                                 */
+  /*    FT_Open_Face                                                       */
+  /*    FT_Open_Args                                                       */
+  /*    FT_Parameter                                                       */
+  /*    FT_Attach_File                                                     */
+  /*    FT_Attach_Stream                                                   */
+  /*                                                                       */
+  /*    FT_Set_Char_Size                                                   */
+  /*    FT_Set_Pixel_Sizes                                                 */
+  /*    FT_Request_Size                                                    */
+  /*    FT_Select_Size                                                     */
+  /*    FT_Size_Request_Type                                               */
+  /*    FT_Size_RequestRec                                                 */
+  /*    FT_Size_Request                                                    */
+  /*    FT_Set_Transform                                                   */
+  /*    FT_Load_Glyph                                                      */
+  /*    FT_Get_Char_Index                                                  */
+  /*    FT_Get_First_Char                                                  */
+  /*    FT_Get_Next_Char                                                   */
+  /*    FT_Get_Name_Index                                                  */
+  /*    FT_Load_Char                                                       */
+  /*                                                                       */
+  /*    FT_OPEN_MEMORY                                                     */
+  /*    FT_OPEN_STREAM                                                     */
+  /*    FT_OPEN_PATHNAME                                                   */
+  /*    FT_OPEN_DRIVER                                                     */
+  /*    FT_OPEN_PARAMS                                                     */
+  /*                                                                       */
+  /*    FT_LOAD_DEFAULT                                                    */
+  /*    FT_LOAD_RENDER                                                     */
+  /*    FT_LOAD_MONOCHROME                                                 */
+  /*    FT_LOAD_LINEAR_DESIGN                                              */
+  /*    FT_LOAD_NO_SCALE                                                   */
+  /*    FT_LOAD_NO_HINTING                                                 */
+  /*    FT_LOAD_NO_BITMAP                                                  */
+  /*    FT_LOAD_NO_AUTOHINT                                                */
+  /*    FT_LOAD_COLOR                                                      */
+  /*                                                                       */
+  /*    FT_LOAD_VERTICAL_LAYOUT                                            */
+  /*    FT_LOAD_IGNORE_TRANSFORM                                           */
+  /*    FT_LOAD_FORCE_AUTOHINT                                             */
+  /*    FT_LOAD_NO_RECURSE                                                 */
+  /*    FT_LOAD_PEDANTIC                                                   */
+  /*                                                                       */
+  /*    FT_LOAD_TARGET_NORMAL                                              */
+  /*    FT_LOAD_TARGET_LIGHT                                               */
+  /*    FT_LOAD_TARGET_MONO                                                */
+  /*    FT_LOAD_TARGET_LCD                                                 */
+  /*    FT_LOAD_TARGET_LCD_V                                               */
+  /*                                                                       */
+  /*    FT_LOAD_TARGET_MODE                                                */
+  /*                                                                       */
+  /*    FT_Render_Glyph                                                    */
+  /*    FT_Render_Mode                                                     */
+  /*    FT_Get_Kerning                                                     */
+  /*    FT_Kerning_Mode                                                    */
+  /*    FT_Get_Track_Kerning                                               */
+  /*    FT_Get_Glyph_Name                                                  */
+  /*    FT_Get_Postscript_Name                                             */
+  /*                                                                       */
+  /*    FT_CharMapRec                                                      */
+  /*    FT_Select_Charmap                                                  */
+  /*    FT_Set_Charmap                                                     */
+  /*    FT_Get_Charmap_Index                                               */
+  /*                                                                       */
+  /*    FT_Get_FSType_Flags                                                */
+  /*    FT_Get_SubGlyph_Info                                               */
+  /*                                                                       */
+  /*    FT_Face_Internal                                                   */
+  /*    FT_Size_Internal                                                   */
+  /*    FT_Slot_Internal                                                   */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_XXX                                                   */
+  /*    FT_STYLE_FLAG_XXX                                                  */
+  /*    FT_OPEN_XXX                                                        */
+  /*    FT_LOAD_XXX                                                        */
+  /*    FT_LOAD_TARGET_XXX                                                 */
+  /*    FT_SUBGLYPH_FLAG_XXX                                               */
+  /*    FT_FSTYPE_XXX                                                      */
+  /*                                                                       */
+  /*    FT_HAS_FAST_GLYPHS                                                 */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_Glyph_Metrics                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A structure used to model the metrics of a single glyph.  The      */
+  /*    values are expressed in 26.6 fractional pixel format; if the flag  */
+  /*    @FT_LOAD_NO_SCALE has been used while loading the glyph, values    */
+  /*    are expressed in font units instead.                               */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    width ::                                                           */
+  /*      The glyph's width.                                               */
+  /*                                                                       */
+  /*    height ::                                                          */
+  /*      The glyph's height.                                              */
+  /*                                                                       */
+  /*    horiBearingX ::                                                    */
+  /*      Left side bearing for horizontal layout.                         */
+  /*                                                                       */
+  /*    horiBearingY ::                                                    */
+  /*      Top side bearing for horizontal layout.                          */
+  /*                                                                       */
+  /*    horiAdvance ::                                                     */
+  /*      Advance width for horizontal layout.                             */
+  /*                                                                       */
+  /*    vertBearingX ::                                                    */
+  /*      Left side bearing for vertical layout.                           */
+  /*                                                                       */
+  /*    vertBearingY ::                                                    */
+  /*      Top side bearing for vertical layout.  Larger positive values    */
+  /*      mean further below the vertical glyph origin.                    */
+  /*                                                                       */
+  /*    vertAdvance ::                                                     */
+  /*      Advance height for vertical layout.  Positive values mean the    */
+  /*      glyph has a positive advance downward.                           */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    If not disabled with @FT_LOAD_NO_HINTING, the values represent     */
+  /*    dimensions of the hinted glyph (in case hinting is applicable).    */
+  /*                                                                       */
+  /*    Stroking a glyph with an outside border does not increase          */
+  /*    `horiAdvance' or `vertAdvance'; you have to manually adjust these  */
+  /*    values to account for the added width and height.                  */
+  /*                                                                       */
+  typedef struct  FT_Glyph_Metrics_
+  {
+    FT_Pos  width;
+    FT_Pos  height;
+
+    FT_Pos  horiBearingX;
+    FT_Pos  horiBearingY;
+    FT_Pos  horiAdvance;
+
+    FT_Pos  vertBearingX;
+    FT_Pos  vertBearingY;
+    FT_Pos  vertAdvance;
+
+  } FT_Glyph_Metrics;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_Bitmap_Size                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This structure models the metrics of a bitmap strike (i.e., a set  */
+  /*    of glyphs for a given point size and resolution) in a bitmap font. */
+  /*    It is used for the `available_sizes' field of @FT_Face.            */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    height :: The vertical distance, in pixels, between two            */
+  /*              consecutive baselines.  It is always positive.           */
+  /*                                                                       */
+  /*    width  :: The average width, in pixels, of all glyphs in the       */
+  /*              strike.                                                  */
+  /*                                                                       */
+  /*    size   :: The nominal size of the strike in 26.6 fractional        */
+  /*              points.  This field is not very useful.                  */
+  /*                                                                       */
+  /*    x_ppem :: The horizontal ppem (nominal width) in 26.6 fractional   */
+  /*              pixels.                                                  */
+  /*                                                                       */
+  /*    y_ppem :: The vertical ppem (nominal height) in 26.6 fractional    */
+  /*              pixels.                                                  */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Windows FNT:                                                       */
+  /*      The nominal size given in a FNT font is not reliable.  Thus when */
+  /*      the driver finds it incorrect, it sets `size' to some calculated */
+  /*      values and sets `x_ppem' and `y_ppem' to the pixel width and     */
+  /*      height given in the font, respectively.                          */
+  /*                                                                       */
+  /*    TrueType embedded bitmaps:                                         */
+  /*      `size', `width', and `height' values are not contained in the    */
+  /*      bitmap strike itself.  They are computed from the global font    */
+  /*      parameters.                                                      */
+  /*                                                                       */
+  typedef struct  FT_Bitmap_Size_
+  {
+    FT_Short  height;
+    FT_Short  width;
+
+    FT_Pos    size;
+
+    FT_Pos    x_ppem;
+    FT_Pos    y_ppem;
+
+  } FT_Bitmap_Size;
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*                                                                       */
+  /*                     O B J E C T   C L A S S E S                       */
+  /*                                                                       */
+  /*************************************************************************/
+  /*************************************************************************/
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Library                                                         */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a FreeType library instance.  Each `library' is        */
+  /*    completely independent from the others; it is the `root' of a set  */
+  /*    of objects like fonts, faces, sizes, etc.                          */
+  /*                                                                       */
+  /*    It also embeds a memory manager (see @FT_Memory), as well as a     */
+  /*    scan-line converter object (see @FT_Raster).                       */
+  /*                                                                       */
+  /*    In multi-threaded applications it is easiest to use one            */
+  /*    `FT_Library' object per thread.  In case this is too cumbersome,   */
+  /*    a single `FT_Library' object across threads is possible also       */
+  /*    (since FreeType version 2.5.6), as long as a mutex lock is used    */
+  /*    around @FT_New_Face and @FT_Done_Face.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Library objects are normally created by @FT_Init_FreeType, and     */
+  /*    destroyed with @FT_Done_FreeType.  If you need reference-counting  */
+  /*    (cf. @FT_Reference_Library), use @FT_New_Library and               */
+  /*    @FT_Done_Library.                                                  */
+  /*                                                                       */
+  typedef struct FT_LibraryRec_  *FT_Library;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    module_management                                                  */
+  /*                                                                       */
+  /*************************************************************************/
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Module                                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a given FreeType module object.  Each module can be a  */
+  /*    font driver, a renderer, or anything else that provides services   */
+  /*    to the formers.                                                    */
+  /*                                                                       */
+  typedef struct FT_ModuleRec_*  FT_Module;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Driver                                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a given FreeType font driver object.  Each font driver */
+  /*    is a special module capable of creating faces from font files.     */
+  /*                                                                       */
+  typedef struct FT_DriverRec_*  FT_Driver;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Renderer                                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a given FreeType renderer.  A renderer is a special    */
+  /*    module in charge of converting a glyph image to a bitmap, when     */
+  /*    necessary.  Each renderer supports a given glyph image format, and */
+  /*    one or more target surface depths.                                 */
+  /*                                                                       */
+  typedef struct FT_RendererRec_*  FT_Renderer;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    base_interface                                                     */
+  /*                                                                       */
+  /*************************************************************************/
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Face                                                            */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a given typographic face object.  A face object models */
+  /*    a given typeface, in a given style.                                */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Each face object also owns a single @FT_GlyphSlot object, as well  */
+  /*    as one or more @FT_Size objects.                                   */
+  /*                                                                       */
+  /*    Use @FT_New_Face or @FT_Open_Face to create a new face object from */
+  /*    a given filepathname or a custom input stream.                     */
+  /*                                                                       */
+  /*    Use @FT_Done_Face to destroy it (along with its slot and sizes).   */
+  /*                                                                       */
+  /*    An `FT_Face' object can only be safely used from one thread at a   */
+  /*    time.  Similarly, creation and destruction of `FT_Face' with the   */
+  /*    same @FT_Library object can only be done from one thread at a      */
+  /*    time.  On the other hand, functions like @FT_Load_Glyph and its    */
+  /*    siblings are thread-safe and do not need the lock to be held as    */
+  /*    long as the same `FT_Face' object is not used from multiple        */
+  /*    threads at the same time.                                          */
+  /*                                                                       */
+  /* <Also>                                                                */
+  /*    See @FT_FaceRec for the publicly accessible fields of a given face */
+  /*    object.                                                            */
+  /*                                                                       */
+  typedef struct FT_FaceRec_*  FT_Face;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Size                                                            */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to an object used to model a face scaled to a given       */
+  /*    character size.                                                    */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Each @FT_Face has an _active_ @FT_Size object that is used by      */
+  /*    functions like @FT_Load_Glyph to determine the scaling             */
+  /*    transformation that in turn is used to load and hint glyphs and    */
+  /*    metrics.                                                           */
+  /*                                                                       */
+  /*    You can use @FT_Set_Char_Size, @FT_Set_Pixel_Sizes,                */
+  /*    @FT_Request_Size or even @FT_Select_Size to change the content     */
+  /*    (i.e., the scaling values) of the active @FT_Size.                 */
+  /*                                                                       */
+  /*    You can use @FT_New_Size to create additional size objects for a   */
+  /*    given @FT_Face, but they won't be used by other functions until    */
+  /*    you activate it through @FT_Activate_Size.  Only one size can be   */
+  /*    activated at any given time per face.                              */
+  /*                                                                       */
+  /* <Also>                                                                */
+  /*    See @FT_SizeRec for the publicly accessible fields of a given size */
+  /*    object.                                                            */
+  /*                                                                       */
+  typedef struct FT_SizeRec_*  FT_Size;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_GlyphSlot                                                       */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a given `glyph slot'.  A slot is a container where it  */
+  /*    is possible to load any of the glyphs contained in its parent      */
+  /*    face.                                                              */
+  /*                                                                       */
+  /*    In other words, each time you call @FT_Load_Glyph or               */
+  /*    @FT_Load_Char, the slot's content is erased by the new glyph data, */
+  /*    i.e., the glyph's metrics, its image (bitmap or outline), and      */
+  /*    other control information.                                         */
+  /*                                                                       */
+  /* <Also>                                                                */
+  /*    See @FT_GlyphSlotRec for the publicly accessible glyph fields.     */
+  /*                                                                       */
+  typedef struct FT_GlyphSlotRec_*  FT_GlyphSlot;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_CharMap                                                         */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a given character map.  A charmap is used to translate */
+  /*    character codes in a given encoding into glyph indexes for its     */
+  /*    parent's face.  Some font formats may provide several charmaps per */
+  /*    font.                                                              */
+  /*                                                                       */
+  /*    Each face object owns zero or more charmaps, but only one of them  */
+  /*    can be `active' and used by @FT_Get_Char_Index or @FT_Load_Char.   */
+  /*                                                                       */
+  /*    The list of available charmaps in a face is available through the  */
+  /*    `face->num_charmaps' and `face->charmaps' fields of @FT_FaceRec.   */
+  /*                                                                       */
+  /*    The currently active charmap is available as `face->charmap'.      */
+  /*    You should call @FT_Set_Charmap to change it.                      */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    When a new face is created (either through @FT_New_Face or         */
+  /*    @FT_Open_Face), the library looks for a Unicode charmap within     */
+  /*    the list and automatically activates it.                           */
+  /*                                                                       */
+  /* <Also>                                                                */
+  /*    See @FT_CharMapRec for the publicly accessible fields of a given   */
+  /*    character map.                                                     */
+  /*                                                                       */
+  typedef struct FT_CharMapRec_*  FT_CharMap;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Macro>                                                               */
+  /*    FT_ENC_TAG                                                         */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This macro converts four-letter tags into an unsigned long.  It is */
+  /*    used to define `encoding' identifiers (see @FT_Encoding).          */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Since many 16-bit compilers don't like 32-bit enumerations, you    */
+  /*    should redefine this macro in case of problems to something like   */
+  /*    this:                                                              */
+  /*                                                                       */
+  /*    {                                                                  */
+  /*      #define FT_ENC_TAG( value, a, b, c, d )  value                   */
+  /*    }                                                                  */
+  /*                                                                       */
+  /*    to get a simple enumeration without assigning special numbers.     */
+  /*                                                                       */
+
+#ifndef FT_ENC_TAG
+#define FT_ENC_TAG( value, a, b, c, d )         \
+          value = ( ( (FT_UInt32)(a) << 24 ) |  \
+                    ( (FT_UInt32)(b) << 16 ) |  \
+                    ( (FT_UInt32)(c) <<  8 ) |  \
+                      (FT_UInt32)(d)         )
+
+#endif /* FT_ENC_TAG */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Enum>                                                                */
+  /*    FT_Encoding                                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    An enumeration used to specify character sets supported by         */
+  /*    charmaps.  Used in the @FT_Select_Charmap API function.            */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Despite the name, this enumeration lists specific character        */
+  /*    repertories (i.e., charsets), and not text encoding methods (e.g., */
+  /*    UTF-8, UTF-16, etc.).                                              */
+  /*                                                                       */
+  /*    Other encodings might be defined in the future.                    */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_ENCODING_NONE ::                                                */
+  /*      The encoding value~0 is reserved.                                */
+  /*                                                                       */
+  /*    FT_ENCODING_UNICODE ::                                             */
+  /*      Corresponds to the Unicode character set.  This value covers     */
+  /*      all versions of the Unicode repertoire, including ASCII and      */
+  /*      Latin-1.  Most fonts include a Unicode charmap, but not all      */
+  /*      of them.                                                         */
+  /*                                                                       */
+  /*      For example, if you want to access Unicode value U+1F028 (and    */
+  /*      the font contains it), use value 0x1F028 as the input value for  */
+  /*      @FT_Get_Char_Index.                                              */
+  /*                                                                       */
+  /*    FT_ENCODING_MS_SYMBOL ::                                           */
+  /*      Corresponds to the Microsoft Symbol encoding, used to encode     */
+  /*      mathematical symbols and wingdings.  For more information, see   */
+  /*      `http://www.microsoft.com/typography/otspec/recom.htm',          */
+  /*      `http://www.kostis.net/charsets/symbol.htm', and                 */
+  /*      `http://www.kostis.net/charsets/wingding.htm'.                   */
+  /*                                                                       */
+  /*      This encoding uses character codes from the PUA (Private Unicode */
+  /*      Area) in the range U+F020-U+F0FF.                                */
+  /*                                                                       */
+  /*    FT_ENCODING_SJIS ::                                                */
+  /*      Corresponds to Japanese SJIS encoding.  More info at             */
+  /*      at `http://en.wikipedia.org/wiki/Shift_JIS'.                     */
+  /*      See note on multi-byte encodings below.                          */
+  /*                                                                       */
+  /*    FT_ENCODING_GB2312 ::                                              */
+  /*      Corresponds to an encoding system for Simplified Chinese as used */
+  /*      used in mainland China.                                          */
+  /*                                                                       */
+  /*    FT_ENCODING_BIG5 ::                                                */
+  /*      Corresponds to an encoding system for Traditional Chinese as     */
+  /*      used in Taiwan and Hong Kong.                                    */
+  /*                                                                       */
+  /*    FT_ENCODING_WANSUNG ::                                             */
+  /*      Corresponds to the Korean encoding system known as Wansung.      */
+  /*      For more information see                                         */
+  /*      `https://msdn.microsoft.com/en-US/goglobal/cc305154'.            */
+  /*                                                                       */
+  /*    FT_ENCODING_JOHAB ::                                               */
+  /*      The Korean standard character set (KS~C 5601-1992), which        */
+  /*      corresponds to MS Windows code page 1361.  This character set    */
+  /*      includes all possible Hangeul character combinations.            */
+  /*                                                                       */
+  /*    FT_ENCODING_ADOBE_LATIN_1 ::                                       */
+  /*      Corresponds to a Latin-1 encoding as defined in a Type~1         */
+  /*      PostScript font.  It is limited to 256 character codes.          */
+  /*                                                                       */
+  /*    FT_ENCODING_ADOBE_STANDARD ::                                      */
+  /*      Corresponds to the Adobe Standard encoding, as found in Type~1,  */
+  /*      CFF, and OpenType/CFF fonts.  It is limited to 256 character     */
+  /*      codes.                                                           */
+  /*                                                                       */
+  /*    FT_ENCODING_ADOBE_EXPERT ::                                        */
+  /*      Corresponds to the Adobe Expert encoding, as found in Type~1,    */
+  /*      CFF, and OpenType/CFF fonts.  It is limited to 256 character     */
+  /*      codes.                                                           */
+  /*                                                                       */
+  /*    FT_ENCODING_ADOBE_CUSTOM ::                                        */
+  /*      Corresponds to a custom encoding, as found in Type~1, CFF, and   */
+  /*      OpenType/CFF fonts.  It is limited to 256 character codes.       */
+  /*                                                                       */
+  /*    FT_ENCODING_APPLE_ROMAN ::                                         */
+  /*      Corresponds to the 8-bit Apple roman encoding.  Many TrueType    */
+  /*      and OpenType fonts contain a charmap for this encoding, since    */
+  /*      older versions of Mac OS are able to use it.                     */
+  /*                                                                       */
+  /*    FT_ENCODING_OLD_LATIN_2 ::                                         */
+  /*      This value is deprecated and was never used nor reported by      */
+  /*      FreeType.  Don't use or test for it.                             */
+  /*                                                                       */
+  /*    FT_ENCODING_MS_SJIS ::                                             */
+  /*      Same as FT_ENCODING_SJIS.  Deprecated.                           */
+  /*                                                                       */
+  /*    FT_ENCODING_MS_GB2312 ::                                           */
+  /*      Same as FT_ENCODING_GB2312.  Deprecated.                         */
+  /*                                                                       */
+  /*    FT_ENCODING_MS_BIG5 ::                                             */
+  /*      Same as FT_ENCODING_BIG5.  Deprecated.                           */
+  /*                                                                       */
+  /*    FT_ENCODING_MS_WANSUNG ::                                          */
+  /*      Same as FT_ENCODING_WANSUNG.  Deprecated.                        */
+  /*                                                                       */
+  /*    FT_ENCODING_MS_JOHAB ::                                            */
+  /*      Same as FT_ENCODING_JOHAB.  Deprecated.                          */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    By default, FreeType automatically synthesizes a Unicode charmap   */
+  /*    for PostScript fonts, using their glyph names dictionaries.        */
+  /*    However, it also reports the encodings defined explicitly in the   */
+  /*    font file, for the cases when they are needed, with the Adobe      */
+  /*    values as well.                                                    */
+  /*                                                                       */
+  /*    FT_ENCODING_NONE is set by the BDF and PCF drivers if the charmap  */
+  /*    is neither Unicode nor ISO-8859-1 (otherwise it is set to          */
+  /*    FT_ENCODING_UNICODE).  Use @FT_Get_BDF_Charset_ID to find out      */
+  /*    which encoding is really present.  If, for example, the            */
+  /*    `cs_registry' field is `KOI8' and the `cs_encoding' field is `R',  */
+  /*    the font is encoded in KOI8-R.                                     */
+  /*                                                                       */
+  /*    FT_ENCODING_NONE is always set (with a single exception) by the    */
+  /*    winfonts driver.  Use @FT_Get_WinFNT_Header and examine the        */
+  /*    `charset' field of the @FT_WinFNT_HeaderRec structure to find out  */
+  /*    which encoding is really present.  For example,                    */
+  /*    @FT_WinFNT_ID_CP1251 (204) means Windows code page 1251 (for       */
+  /*    Russian).                                                          */
+  /*                                                                       */
+  /*    FT_ENCODING_NONE is set if `platform_id' is @TT_PLATFORM_MACINTOSH */
+  /*    and `encoding_id' is not @TT_MAC_ID_ROMAN (otherwise it is set to  */
+  /*    FT_ENCODING_APPLE_ROMAN).                                          */
+  /*                                                                       */
+  /*    If `platform_id' is @TT_PLATFORM_MACINTOSH, use the function       */
+  /*    @FT_Get_CMap_Language_ID to query the Mac language ID that may     */
+  /*    be needed to be able to distinguish Apple encoding variants.  See  */
+  /*                                                                       */
+  /*      http://www.unicode.org/Public/MAPPINGS/VENDORS/APPLE/Readme.txt  */
+  /*                                                                       */
+  /*    to get an idea how to do that.  Basically, if the language ID      */
+  /*    is~0, don't use it, otherwise subtract 1 from the language ID.     */
+  /*    Then examine `encoding_id'.  If, for example, `encoding_id' is     */
+  /*    @TT_MAC_ID_ROMAN and the language ID (minus~1) is                  */
+  /*    `TT_MAC_LANGID_GREEK', it is the Greek encoding, not Roman.        */
+  /*    @TT_MAC_ID_ARABIC with `TT_MAC_LANGID_FARSI' means the Farsi       */
+  /*    variant the Arabic encoding.                                       */
+  /*                                                                       */
+  typedef enum  FT_Encoding_
+  {
+    FT_ENC_TAG( FT_ENCODING_NONE, 0, 0, 0, 0 ),
+
+    FT_ENC_TAG( FT_ENCODING_MS_SYMBOL, 's', 'y', 'm', 'b' ),
+    FT_ENC_TAG( FT_ENCODING_UNICODE,   'u', 'n', 'i', 'c' ),
+
+    FT_ENC_TAG( FT_ENCODING_SJIS,    's', 'j', 'i', 's' ),
+    FT_ENC_TAG( FT_ENCODING_GB2312,  'g', 'b', ' ', ' ' ),
+    FT_ENC_TAG( FT_ENCODING_BIG5,    'b', 'i', 'g', '5' ),
+    FT_ENC_TAG( FT_ENCODING_WANSUNG, 'w', 'a', 'n', 's' ),
+    FT_ENC_TAG( FT_ENCODING_JOHAB,   'j', 'o', 'h', 'a' ),
+
+    /* for backwards compatibility */
+    FT_ENCODING_MS_SJIS    = FT_ENCODING_SJIS,
+    FT_ENCODING_MS_GB2312  = FT_ENCODING_GB2312,
+    FT_ENCODING_MS_BIG5    = FT_ENCODING_BIG5,
+    FT_ENCODING_MS_WANSUNG = FT_ENCODING_WANSUNG,
+    FT_ENCODING_MS_JOHAB   = FT_ENCODING_JOHAB,
+
+    FT_ENC_TAG( FT_ENCODING_ADOBE_STANDARD, 'A', 'D', 'O', 'B' ),
+    FT_ENC_TAG( FT_ENCODING_ADOBE_EXPERT,   'A', 'D', 'B', 'E' ),
+    FT_ENC_TAG( FT_ENCODING_ADOBE_CUSTOM,   'A', 'D', 'B', 'C' ),
+    FT_ENC_TAG( FT_ENCODING_ADOBE_LATIN_1,  'l', 'a', 't', '1' ),
+
+    FT_ENC_TAG( FT_ENCODING_OLD_LATIN_2, 'l', 'a', 't', '2' ),
+
+    FT_ENC_TAG( FT_ENCODING_APPLE_ROMAN, 'a', 'r', 'm', 'n' )
+
+  } FT_Encoding;
+
+
+  /* these constants are deprecated; use the corresponding `FT_Encoding' */
+  /* values instead                                                      */
+#define ft_encoding_none            FT_ENCODING_NONE
+#define ft_encoding_unicode         FT_ENCODING_UNICODE
+#define ft_encoding_symbol          FT_ENCODING_MS_SYMBOL
+#define ft_encoding_latin_1         FT_ENCODING_ADOBE_LATIN_1
+#define ft_encoding_latin_2         FT_ENCODING_OLD_LATIN_2
+#define ft_encoding_sjis            FT_ENCODING_SJIS
+#define ft_encoding_gb2312          FT_ENCODING_GB2312
+#define ft_encoding_big5            FT_ENCODING_BIG5
+#define ft_encoding_wansung         FT_ENCODING_WANSUNG
+#define ft_encoding_johab           FT_ENCODING_JOHAB
+
+#define ft_encoding_adobe_standard  FT_ENCODING_ADOBE_STANDARD
+#define ft_encoding_adobe_expert    FT_ENCODING_ADOBE_EXPERT
+#define ft_encoding_adobe_custom    FT_ENCODING_ADOBE_CUSTOM
+#define ft_encoding_apple_roman     FT_ENCODING_APPLE_ROMAN
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_CharMapRec                                                      */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    The base charmap structure.                                        */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    face        :: A handle to the parent face object.                 */
+  /*                                                                       */
+  /*    encoding    :: An @FT_Encoding tag identifying the charmap.  Use   */
+  /*                   this with @FT_Select_Charmap.                       */
+  /*                                                                       */
+  /*    platform_id :: An ID number describing the platform for the        */
+  /*                   following encoding ID.  This comes directly from    */
+  /*                   the TrueType specification and should be emulated   */
+  /*                   for other formats.                                  */
+  /*                                                                       */
+  /*    encoding_id :: A platform specific encoding number.  This also     */
+  /*                   comes from the TrueType specification and should be */
+  /*                   emulated similarly.                                 */
+  /*                                                                       */
+  typedef struct  FT_CharMapRec_
+  {
+    FT_Face      face;
+    FT_Encoding  encoding;
+    FT_UShort    platform_id;
+    FT_UShort    encoding_id;
+
+  } FT_CharMapRec;
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*                                                                       */
+  /*                 B A S E   O B J E C T   C L A S S E S                 */
+  /*                                                                       */
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Face_Internal                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    An opaque handle to an `FT_Face_InternalRec' structure, used to    */
+  /*    model private data of a given @FT_Face object.                     */
+  /*                                                                       */
+  /*    This structure might change between releases of FreeType~2 and is  */
+  /*    not generally available to client applications.                    */
+  /*                                                                       */
+  typedef struct FT_Face_InternalRec_*  FT_Face_Internal;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_FaceRec                                                         */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    FreeType root face class structure.  A face object models a        */
+  /*    typeface in a font file.                                           */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    num_faces           :: The number of faces in the font file.  Some */
+  /*                           font formats can have multiple faces in     */
+  /*                           a font file.                                */
+  /*                                                                       */
+  /*    face_index          :: The index of the face in the font file.  It */
+  /*                           is set to~0 if there is only one face in    */
+  /*                           the font file.                              */
+  /*                                                                       */
+  /*    face_flags          :: A set of bit flags that give important      */
+  /*                           information about the face; see             */
+  /*                           @FT_FACE_FLAG_XXX for the details.          */
+  /*                                                                       */
+  /*    style_flags         :: A set of bit flags indicating the style of  */
+  /*                           the face; see @FT_STYLE_FLAG_XXX for the    */
+  /*                           details.                                    */
+  /*                                                                       */
+  /*    num_glyphs          :: The number of glyphs in the face.  If the   */
+  /*                           face is scalable and has sbits (see         */
+  /*                           `num_fixed_sizes'), it is set to the number */
+  /*                           of outline glyphs.                          */
+  /*                                                                       */
+  /*                           For CID-keyed fonts, this value gives the   */
+  /*                           highest CID used in the font.               */
+  /*                                                                       */
+  /*    family_name         :: The face's family name.  This is an ASCII   */
+  /*                           string, usually in English, that describes  */
+  /*                           the typeface's family (like `Times New      */
+  /*                           Roman', `Bodoni', `Garamond', etc).  This   */
+  /*                           is a least common denominator used to list  */
+  /*                           fonts.  Some formats (TrueType & OpenType)  */
+  /*                           provide localized and Unicode versions of   */
+  /*                           this string.  Applications should use the   */
+  /*                           format specific interface to access them.   */
+  /*                           Can be NULL (e.g., in fonts embedded in a   */
+  /*                           PDF file).                                  */
+  /*                                                                       */
+  /*                           In case the font doesn't provide a specific */
+  /*                           family name entry, FreeType tries to        */
+  /*                           synthesize one, deriving it from other name */
+  /*                           entries.                                    */
+  /*                                                                       */
+  /*    style_name          :: The face's style name.  This is an ASCII    */
+  /*                           string, usually in English, that describes  */
+  /*                           the typeface's style (like `Italic',        */
+  /*                           `Bold', `Condensed', etc).  Not all font    */
+  /*                           formats provide a style name, so this field */
+  /*                           is optional, and can be set to NULL.  As    */
+  /*                           for `family_name', some formats provide     */
+  /*                           localized and Unicode versions of this      */
+  /*                           string.  Applications should use the format */
+  /*                           specific interface to access them.          */
+  /*                                                                       */
+  /*    num_fixed_sizes     :: The number of bitmap strikes in the face.   */
+  /*                           Even if the face is scalable, there might   */
+  /*                           still be bitmap strikes, which are called   */
+  /*                           `sbits' in that case.                       */
+  /*                                                                       */
+  /*    available_sizes     :: An array of @FT_Bitmap_Size for all bitmap  */
+  /*                           strikes in the face.  It is set to NULL if  */
+  /*                           there is no bitmap strike.                  */
+  /*                                                                       */
+  /*    num_charmaps        :: The number of charmaps in the face.         */
+  /*                                                                       */
+  /*    charmaps            :: An array of the charmaps of the face.       */
+  /*                                                                       */
+  /*    generic             :: A field reserved for client uses.  See the  */
+  /*                           @FT_Generic type description.               */
+  /*                                                                       */
+  /*    bbox                :: The font bounding box.  Coordinates are     */
+  /*                           expressed in font units (see                */
+  /*                           `units_per_EM').  The box is large enough   */
+  /*                           to contain any glyph from the font.  Thus,  */
+  /*                           `bbox.yMax' can be seen as the `maximum     */
+  /*                           ascender', and `bbox.yMin' as the `minimum  */
+  /*                           descender'.  Only relevant for scalable     */
+  /*                           formats.                                    */
+  /*                                                                       */
+  /*                           Note that the bounding box might be off by  */
+  /*                           (at least) one pixel for hinted fonts.  See */
+  /*                           @FT_Size_Metrics for further discussion.    */
+  /*                                                                       */
+  /*    units_per_EM        :: The number of font units per EM square for  */
+  /*                           this face.  This is typically 2048 for      */
+  /*                           TrueType fonts, and 1000 for Type~1 fonts.  */
+  /*                           Only relevant for scalable formats.         */
+  /*                                                                       */
+  /*    ascender            :: The typographic ascender of the face,       */
+  /*                           expressed in font units.  For font formats  */
+  /*                           not having this information, it is set to   */
+  /*                           `bbox.yMax'.  Only relevant for scalable    */
+  /*                           formats.                                    */
+  /*                                                                       */
+  /*    descender           :: The typographic descender of the face,      */
+  /*                           expressed in font units.  For font formats  */
+  /*                           not having this information, it is set to   */
+  /*                           `bbox.yMin'.  Note that this field is       */
+  /*                           usually negative.  Only relevant for        */
+  /*                           scalable formats.                           */
+  /*                                                                       */
+  /*    height              :: This value is the vertical distance         */
+  /*                           between two consecutive baselines,          */
+  /*                           expressed in font units.  It is always      */
+  /*                           positive.  Only relevant for scalable       */
+  /*                           formats.                                    */
+  /*                                                                       */
+  /*                           If you want the global glyph height, use    */
+  /*                           `ascender - descender'.                     */
+  /*                                                                       */
+  /*    max_advance_width   :: The maximum advance width, in font units,   */
+  /*                           for all glyphs in this face.  This can be   */
+  /*                           used to make word wrapping computations     */
+  /*                           faster.  Only relevant for scalable         */
+  /*                           formats.                                    */
+  /*                                                                       */
+  /*    max_advance_height  :: The maximum advance height, in font units,  */
+  /*                           for all glyphs in this face.  This is only  */
+  /*                           relevant for vertical layouts, and is set   */
+  /*                           to `height' for fonts that do not provide   */
+  /*                           vertical metrics.  Only relevant for        */
+  /*                           scalable formats.                           */
+  /*                                                                       */
+  /*    underline_position  :: The position, in font units, of the         */
+  /*                           underline line for this face.  It is the    */
+  /*                           center of the underlining stem.  Only       */
+  /*                           relevant for scalable formats.              */
+  /*                                                                       */
+  /*    underline_thickness :: The thickness, in font units, of the        */
+  /*                           underline for this face.  Only relevant for */
+  /*                           scalable formats.                           */
+  /*                                                                       */
+  /*    glyph               :: The face's associated glyph slot(s).        */
+  /*                                                                       */
+  /*    size                :: The current active size for this face.      */
+  /*                                                                       */
+  /*    charmap             :: The current active charmap for this face.   */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Fields may be changed after a call to @FT_Attach_File or           */
+  /*    @FT_Attach_Stream.                                                 */
+  /*                                                                       */
+  typedef struct  FT_FaceRec_
+  {
+    FT_Long           num_faces;
+    FT_Long           face_index;
+
+    FT_Long           face_flags;
+    FT_Long           style_flags;
+
+    FT_Long           num_glyphs;
+
+    FT_String*        family_name;
+    FT_String*        style_name;
+
+    FT_Int            num_fixed_sizes;
+    FT_Bitmap_Size*   available_sizes;
+
+    FT_Int            num_charmaps;
+    FT_CharMap*       charmaps;
+
+    FT_Generic        generic;
+
+    /*# The following member variables (down to `underline_thickness') */
+    /*# are only relevant to scalable outlines; cf. @FT_Bitmap_Size    */
+    /*# for bitmap fonts.                                              */
+    FT_BBox           bbox;
+
+    FT_UShort         units_per_EM;
+    FT_Short          ascender;
+    FT_Short          descender;
+    FT_Short          height;
+
+    FT_Short          max_advance_width;
+    FT_Short          max_advance_height;
+
+    FT_Short          underline_position;
+    FT_Short          underline_thickness;
+
+    FT_GlyphSlot      glyph;
+    FT_Size           size;
+    FT_CharMap        charmap;
+
+    /*@private begin */
+
+    FT_Driver         driver;
+    FT_Memory         memory;
+    FT_Stream         stream;
+
+    FT_ListRec        sizes_list;
+
+    FT_Generic        autohint;   /* face-specific auto-hinter data */
+    void*             extensions; /* unused                         */
+
+    FT_Face_Internal  internal;
+
+    /*@private end */
+
+  } FT_FaceRec;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Enum>                                                                */
+  /*    FT_FACE_FLAG_XXX                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A list of bit flags used in the `face_flags' field of the          */
+  /*    @FT_FaceRec structure.  They inform client applications of         */
+  /*    properties of the corresponding face.                              */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_FACE_FLAG_SCALABLE ::                                           */
+  /*      Indicates that the face contains outline glyphs.  This doesn't   */
+  /*      prevent bitmap strikes, i.e., a face can have both this and      */
+  /*      and @FT_FACE_FLAG_FIXED_SIZES set.                               */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_FIXED_SIZES ::                                        */
+  /*      Indicates that the face contains bitmap strikes.  See also the   */
+  /*      `num_fixed_sizes' and `available_sizes' fields of @FT_FaceRec.   */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_FIXED_WIDTH ::                                        */
+  /*      Indicates that the face contains fixed-width characters (like    */
+  /*      Courier, Lucido, MonoType, etc.).                                */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_SFNT ::                                               */
+  /*      Indicates that the face uses the `sfnt' storage scheme.  For     */
+  /*      now, this means TrueType and OpenType.                           */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_HORIZONTAL ::                                         */
+  /*      Indicates that the face contains horizontal glyph metrics.  This */
+  /*      should be set for all common formats.                            */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_VERTICAL ::                                           */
+  /*      Indicates that the face contains vertical glyph metrics.  This   */
+  /*      is only available in some formats, not all of them.              */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_KERNING ::                                            */
+  /*      Indicates that the face contains kerning information.  If set,   */
+  /*      the kerning distance can be retrieved through the function       */
+  /*      @FT_Get_Kerning.  Otherwise the function always return the       */
+  /*      vector (0,0).  Note that FreeType doesn't handle kerning data    */
+  /*      from the `GPOS' table (as present in some OpenType fonts).       */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_FAST_GLYPHS ::                                        */
+  /*      THIS FLAG IS DEPRECATED.  DO NOT USE OR TEST IT.                 */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_MULTIPLE_MASTERS ::                                   */
+  /*      Indicates that the font contains multiple masters and is capable */
+  /*      of interpolating between them.  See the multiple-masters         */
+  /*      specific API for details.                                        */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_GLYPH_NAMES ::                                        */
+  /*      Indicates that the font contains glyph names that can be         */
+  /*      retrieved through @FT_Get_Glyph_Name.  Note that some TrueType   */
+  /*      fonts contain broken glyph name tables.  Use the function        */
+  /*      @FT_Has_PS_Glyph_Names when needed.                              */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_EXTERNAL_STREAM ::                                    */
+  /*      Used internally by FreeType to indicate that a face's stream was */
+  /*      provided by the client application and should not be destroyed   */
+  /*      when @FT_Done_Face is called.  Don't read or test this flag.     */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_HINTER ::                                             */
+  /*      Set if the font driver has a hinting machine of its own.  For    */
+  /*      example, with TrueType fonts, it makes sense to use data from    */
+  /*      the SFNT `gasp' table only if the native TrueType hinting engine */
+  /*      (with the bytecode interpreter) is available and active.         */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_CID_KEYED ::                                          */
+  /*      Set if the font is CID-keyed.  In that case, the font is not     */
+  /*      accessed by glyph indices but by CID values.  For subsetted      */
+  /*      CID-keyed fonts this has the consequence that not all index      */
+  /*      values are a valid argument to FT_Load_Glyph.  Only the CID      */
+  /*      values for which corresponding glyphs in the subsetted font      */
+  /*      exist make FT_Load_Glyph return successfully; in all other cases */
+  /*      you get an `FT_Err_Invalid_Argument' error.                      */
+  /*                                                                       */
+  /*      Note that CID-keyed fonts that are in an SFNT wrapper don't      */
+  /*      have this flag set since the glyphs are accessed in the normal   */
+  /*      way (using contiguous indices); the `CID-ness' isn't visible to  */
+  /*      the application.                                                 */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_TRICKY ::                                             */
+  /*      Set if the font is `tricky', this is, it always needs the        */
+  /*      font format's native hinting engine to get a reasonable result.  */
+  /*      A typical example is the Chinese font `mingli.ttf' that uses     */
+  /*      TrueType bytecode instructions to move and scale all of its      */
+  /*      subglyphs.                                                       */
+  /*                                                                       */
+  /*      It is not possible to auto-hint such fonts using                 */
+  /*      @FT_LOAD_FORCE_AUTOHINT; it will also ignore                     */
+  /*      @FT_LOAD_NO_HINTING.  You have to set both @FT_LOAD_NO_HINTING   */
+  /*      and @FT_LOAD_NO_AUTOHINT to really disable hinting; however, you */
+  /*      probably never want this except for demonstration purposes.      */
+  /*                                                                       */
+  /*      Currently, there are about a dozen TrueType fonts in the list of */
+  /*      tricky fonts; they are hard-coded in file `ttobjs.c'.            */
+  /*                                                                       */
+  /*    FT_FACE_FLAG_COLOR ::                                              */
+  /*      Set if the font has color glyph tables.  To access color glyphs  */
+  /*      use @FT_LOAD_COLOR.                                              */
+  /*                                                                       */
+#define FT_FACE_FLAG_SCALABLE          ( 1L <<  0 )
+#define FT_FACE_FLAG_FIXED_SIZES       ( 1L <<  1 )
+#define FT_FACE_FLAG_FIXED_WIDTH       ( 1L <<  2 )
+#define FT_FACE_FLAG_SFNT              ( 1L <<  3 )
+#define FT_FACE_FLAG_HORIZONTAL        ( 1L <<  4 )
+#define FT_FACE_FLAG_VERTICAL          ( 1L <<  5 )
+#define FT_FACE_FLAG_KERNING           ( 1L <<  6 )
+#define FT_FACE_FLAG_FAST_GLYPHS       ( 1L <<  7 )
+#define FT_FACE_FLAG_MULTIPLE_MASTERS  ( 1L <<  8 )
+#define FT_FACE_FLAG_GLYPH_NAMES       ( 1L <<  9 )
+#define FT_FACE_FLAG_EXTERNAL_STREAM   ( 1L << 10 )
+#define FT_FACE_FLAG_HINTER            ( 1L << 11 )
+#define FT_FACE_FLAG_CID_KEYED         ( 1L << 12 )
+#define FT_FACE_FLAG_TRICKY            ( 1L << 13 )
+#define FT_FACE_FLAG_COLOR             ( 1L << 14 )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_HAS_HORIZONTAL( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains
+   *   horizontal metrics (this is true for all font formats though).
+   *
+   * @also:
+   *   @FT_HAS_VERTICAL can be used to check for vertical metrics.
+   *
+   */
+#define FT_HAS_HORIZONTAL( face ) \
+          ( face->face_flags & FT_FACE_FLAG_HORIZONTAL )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_HAS_VERTICAL( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains real
+   *   vertical metrics (and not only synthesized ones).
+   *
+   */
+#define FT_HAS_VERTICAL( face ) \
+          ( face->face_flags & FT_FACE_FLAG_VERTICAL )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_HAS_KERNING( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains kerning
+   *   data that can be accessed with @FT_Get_Kerning.
+   *
+   */
+#define FT_HAS_KERNING( face ) \
+          ( face->face_flags & FT_FACE_FLAG_KERNING )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_IS_SCALABLE( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains a scalable
+   *   font face (true for TrueType, Type~1, Type~42, CID, OpenType/CFF,
+   *   and PFR font formats.
+   *
+   */
+#define FT_IS_SCALABLE( face ) \
+          ( face->face_flags & FT_FACE_FLAG_SCALABLE )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_IS_SFNT( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains a font
+   *   whose format is based on the SFNT storage scheme.  This usually
+   *   means: TrueType fonts, OpenType fonts, as well as SFNT-based embedded
+   *   bitmap fonts.
+   *
+   *   If this macro is true, all functions defined in @FT_SFNT_NAMES_H and
+   *   @FT_TRUETYPE_TABLES_H are available.
+   *
+   */
+#define FT_IS_SFNT( face ) \
+          ( face->face_flags & FT_FACE_FLAG_SFNT )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_IS_FIXED_WIDTH( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains a font face
+   *   that contains fixed-width (or `monospace', `fixed-pitch', etc.)
+   *   glyphs.
+   *
+   */
+#define FT_IS_FIXED_WIDTH( face ) \
+          ( face->face_flags & FT_FACE_FLAG_FIXED_WIDTH )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_HAS_FIXED_SIZES( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains some
+   *   embedded bitmaps.  See the `available_sizes' field of the
+   *   @FT_FaceRec structure.
+   *
+   */
+#define FT_HAS_FIXED_SIZES( face ) \
+          ( face->face_flags & FT_FACE_FLAG_FIXED_SIZES )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_HAS_FAST_GLYPHS( face )
+   *
+   * @description:
+   *   Deprecated.
+   *
+   */
+#define FT_HAS_FAST_GLYPHS( face )  0
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_HAS_GLYPH_NAMES( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains some glyph
+   *   names that can be accessed through @FT_Get_Glyph_Name.
+   *
+   */
+#define FT_HAS_GLYPH_NAMES( face ) \
+          ( face->face_flags & FT_FACE_FLAG_GLYPH_NAMES )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_HAS_MULTIPLE_MASTERS( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains some
+   *   multiple masters.  The functions provided by @FT_MULTIPLE_MASTERS_H
+   *   are then available to choose the exact design you want.
+   *
+   */
+#define FT_HAS_MULTIPLE_MASTERS( face ) \
+          ( face->face_flags & FT_FACE_FLAG_MULTIPLE_MASTERS )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_IS_CID_KEYED( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains a CID-keyed
+   *   font.  See the discussion of @FT_FACE_FLAG_CID_KEYED for more
+   *   details.
+   *
+   *   If this macro is true, all functions defined in @FT_CID_H are
+   *   available.
+   *
+   */
+#define FT_IS_CID_KEYED( face ) \
+          ( face->face_flags & FT_FACE_FLAG_CID_KEYED )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_IS_TRICKY( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face represents a `tricky' font.
+   *   See the discussion of @FT_FACE_FLAG_TRICKY for more details.
+   *
+   */
+#define FT_IS_TRICKY( face ) \
+          ( face->face_flags & FT_FACE_FLAG_TRICKY )
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_HAS_COLOR( face )
+   *
+   * @description:
+   *   A macro that returns true whenever a face object contains
+   *   tables for color glyphs.
+   *
+   */
+#define FT_HAS_COLOR( face ) \
+          ( face->face_flags & FT_FACE_FLAG_COLOR )
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Const>                                                               */
+  /*    FT_STYLE_FLAG_XXX                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A list of bit-flags used to indicate the style of a given face.    */
+  /*    These are used in the `style_flags' field of @FT_FaceRec.          */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_STYLE_FLAG_ITALIC ::                                            */
+  /*      Indicates that a given face style is italic or oblique.          */
+  /*                                                                       */
+  /*    FT_STYLE_FLAG_BOLD ::                                              */
+  /*      Indicates that a given face is bold.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The style information as provided by FreeType is very basic.  More */
+  /*    details are beyond the scope and should be done on a higher level  */
+  /*    (for example, by analyzing various fields of the `OS/2' table in   */
+  /*    SFNT based fonts).                                                 */
+  /*                                                                       */
+#define FT_STYLE_FLAG_ITALIC  ( 1 << 0 )
+#define FT_STYLE_FLAG_BOLD    ( 1 << 1 )
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Size_Internal                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    An opaque handle to an `FT_Size_InternalRec' structure, used to    */
+  /*    model private data of a given @FT_Size object.                     */
+  /*                                                                       */
+  typedef struct FT_Size_InternalRec_*  FT_Size_Internal;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_Size_Metrics                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    The size metrics structure gives the metrics of a size object.     */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    x_ppem       :: The width of the scaled EM square in pixels, hence */
+  /*                    the term `ppem' (pixels per EM).  It is also       */
+  /*                    referred to as `nominal width'.                    */
+  /*                                                                       */
+  /*    y_ppem       :: The height of the scaled EM square in pixels,      */
+  /*                    hence the term `ppem' (pixels per EM).  It is also */
+  /*                    referred to as `nominal height'.                   */
+  /*                                                                       */
+  /*    x_scale      :: A 16.16 fractional scaling value used to convert   */
+  /*                    horizontal metrics from font units to 26.6         */
+  /*                    fractional pixels.  Only relevant for scalable     */
+  /*                    font formats.                                      */
+  /*                                                                       */
+  /*    y_scale      :: A 16.16 fractional scaling value used to convert   */
+  /*                    vertical metrics from font units to 26.6           */
+  /*                    fractional pixels.  Only relevant for scalable     */
+  /*                    font formats.                                      */
+  /*                                                                       */
+  /*    ascender     :: The ascender in 26.6 fractional pixels.  See       */
+  /*                    @FT_FaceRec for the details.                       */
+  /*                                                                       */
+  /*    descender    :: The descender in 26.6 fractional pixels.  See      */
+  /*                    @FT_FaceRec for the details.                       */
+  /*                                                                       */
+  /*    height       :: The height in 26.6 fractional pixels.  See         */
+  /*                    @FT_FaceRec for the details.                       */
+  /*                                                                       */
+  /*    max_advance  :: The maximum advance width in 26.6 fractional       */
+  /*                    pixels.  See @FT_FaceRec for the details.          */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The scaling values, if relevant, are determined first during a     */
+  /*    size changing operation.  The remaining fields are then set by the */
+  /*    driver.  For scalable formats, they are usually set to scaled      */
+  /*    values of the corresponding fields in @FT_FaceRec.                 */
+  /*                                                                       */
+  /*    Note that due to glyph hinting, these values might not be exact    */
+  /*    for certain fonts.  Thus they must be treated as unreliable        */
+  /*    with an error margin of at least one pixel!                        */
+  /*                                                                       */
+  /*    Indeed, the only way to get the exact metrics is to render _all_   */
+  /*    glyphs.  As this would be a definite performance hit, it is up to  */
+  /*    client applications to perform such computations.                  */
+  /*                                                                       */
+  /*    The FT_Size_Metrics structure is valid for bitmap fonts also.      */
+  /*                                                                       */
+  typedef struct  FT_Size_Metrics_
+  {
+    FT_UShort  x_ppem;      /* horizontal pixels per EM               */
+    FT_UShort  y_ppem;      /* vertical pixels per EM                 */
+
+    FT_Fixed   x_scale;     /* scaling values used to convert font    */
+    FT_Fixed   y_scale;     /* units to 26.6 fractional pixels        */
+
+    FT_Pos     ascender;    /* ascender in 26.6 frac. pixels          */
+    FT_Pos     descender;   /* descender in 26.6 frac. pixels         */
+    FT_Pos     height;      /* text height in 26.6 frac. pixels       */
+    FT_Pos     max_advance; /* max horizontal advance, in 26.6 pixels */
+
+  } FT_Size_Metrics;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_SizeRec                                                         */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    FreeType root size class structure.  A size object models a face   */
+  /*    object at a given size.                                            */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    face    :: Handle to the parent face object.                       */
+  /*                                                                       */
+  /*    generic :: A typeless pointer, unused by the FreeType library or   */
+  /*               any of its drivers.  It can be used by client           */
+  /*               applications to link their own data to each size        */
+  /*               object.                                                 */
+  /*                                                                       */
+  /*    metrics :: Metrics for this size object.  This field is read-only. */
+  /*                                                                       */
+  typedef struct  FT_SizeRec_
+  {
+    FT_Face           face;      /* parent face object              */
+    FT_Generic        generic;   /* generic pointer for client uses */
+    FT_Size_Metrics   metrics;   /* size metrics                    */
+    FT_Size_Internal  internal;
+
+  } FT_SizeRec;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_SubGlyph                                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    The subglyph structure is an internal object used to describe      */
+  /*    subglyphs (for example, in the case of composites).                */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The subglyph implementation is not part of the high-level API,     */
+  /*    hence the forward structure declaration.                           */
+  /*                                                                       */
+  /*    You can however retrieve subglyph information with                 */
+  /*    @FT_Get_SubGlyph_Info.                                             */
+  /*                                                                       */
+  typedef struct FT_SubGlyphRec_*  FT_SubGlyph;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Slot_Internal                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    An opaque handle to an `FT_Slot_InternalRec' structure, used to    */
+  /*    model private data of a given @FT_GlyphSlot object.                */
+  /*                                                                       */
+  typedef struct FT_Slot_InternalRec_*  FT_Slot_Internal;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_GlyphSlotRec                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    FreeType root glyph slot class structure.  A glyph slot is a       */
+  /*    container where individual glyphs can be loaded, be they in        */
+  /*    outline or bitmap format.                                          */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    library           :: A handle to the FreeType library instance     */
+  /*                         this slot belongs to.                         */
+  /*                                                                       */
+  /*    face              :: A handle to the parent face object.           */
+  /*                                                                       */
+  /*    next              :: In some cases (like some font tools), several */
+  /*                         glyph slots per face object can be a good     */
+  /*                         thing.  As this is rare, the glyph slots are  */
+  /*                         listed through a direct, single-linked list   */
+  /*                         using its `next' field.                       */
+  /*                                                                       */
+  /*    generic           :: A typeless pointer unused by the FreeType     */
+  /*                         library or any of its drivers.  It can be     */
+  /*                         used by client applications to link their own */
+  /*                         data to each glyph slot object.               */
+  /*                                                                       */
+  /*    metrics           :: The metrics of the last loaded glyph in the   */
+  /*                         slot.  The returned values depend on the last */
+  /*                         load flags (see the @FT_Load_Glyph API        */
+  /*                         function) and can be expressed either in 26.6 */
+  /*                         fractional pixels or font units.              */
+  /*                                                                       */
+  /*                         Note that even when the glyph image is        */
+  /*                         transformed, the metrics are not.             */
+  /*                                                                       */
+  /*    linearHoriAdvance :: The advance width of the unhinted glyph.      */
+  /*                         Its value is expressed in 16.16 fractional    */
+  /*                         pixels, unless @FT_LOAD_LINEAR_DESIGN is set  */
+  /*                         when loading the glyph.  This field can be    */
+  /*                         important to perform correct WYSIWYG layout.  */
+  /*                         Only relevant for outline glyphs.             */
+  /*                                                                       */
+  /*    linearVertAdvance :: The advance height of the unhinted glyph.     */
+  /*                         Its value is expressed in 16.16 fractional    */
+  /*                         pixels, unless @FT_LOAD_LINEAR_DESIGN is set  */
+  /*                         when loading the glyph.  This field can be    */
+  /*                         important to perform correct WYSIWYG layout.  */
+  /*                         Only relevant for outline glyphs.             */
+  /*                                                                       */
+  /*    advance           :: This shorthand is, depending on               */
+  /*                         @FT_LOAD_IGNORE_TRANSFORM, the transformed    */
+  /*                         (hinted) advance width for the glyph, in 26.6 */
+  /*                         fractional pixel format.  As specified with   */
+  /*                         @FT_LOAD_VERTICAL_LAYOUT, it uses either the  */
+  /*                         `horiAdvance' or the `vertAdvance' value of   */
+  /*                         `metrics' field.                              */
+  /*                                                                       */
+  /*    format            :: This field indicates the format of the image  */
+  /*                         contained in the glyph slot.  Typically       */
+  /*                         @FT_GLYPH_FORMAT_BITMAP,                      */
+  /*                         @FT_GLYPH_FORMAT_OUTLINE, or                  */
+  /*                         @FT_GLYPH_FORMAT_COMPOSITE, but others are    */
+  /*                         possible.                                     */
+  /*                                                                       */
+  /*    bitmap            :: This field is used as a bitmap descriptor     */
+  /*                         when the slot format is                       */
+  /*                         @FT_GLYPH_FORMAT_BITMAP.  Note that the       */
+  /*                         address and content of the bitmap buffer can  */
+  /*                         change between calls of @FT_Load_Glyph and a  */
+  /*                         few other functions.                          */
+  /*                                                                       */
+  /*    bitmap_left       :: The bitmap's left bearing expressed in        */
+  /*                         integer pixels.  Only valid if the format is  */
+  /*                         @FT_GLYPH_FORMAT_BITMAP, this is, if the      */
+  /*                         glyph slot contains a bitmap.                 */
+  /*                                                                       */
+  /*    bitmap_top        :: The bitmap's top bearing expressed in integer */
+  /*                         pixels.  Remember that this is the distance   */
+  /*                         from the baseline to the top-most glyph       */
+  /*                         scanline, upwards y~coordinates being         */
+  /*                         *positive*.                                   */
+  /*                                                                       */
+  /*    outline           :: The outline descriptor for the current glyph  */
+  /*                         image if its format is                        */
+  /*                         @FT_GLYPH_FORMAT_OUTLINE.  Once a glyph is    */
+  /*                         loaded, `outline' can be transformed,         */
+  /*                         distorted, embolded, etc.  However, it must   */
+  /*                         not be freed.                                 */
+  /*                                                                       */
+  /*    num_subglyphs     :: The number of subglyphs in a composite glyph. */
+  /*                         This field is only valid for the composite    */
+  /*                         glyph format that should normally only be     */
+  /*                         loaded with the @FT_LOAD_NO_RECURSE flag.     */
+  /*                                                                       */
+  /*    subglyphs         :: An array of subglyph descriptors for          */
+  /*                         composite glyphs.  There are `num_subglyphs'  */
+  /*                         elements in there.  Currently internal to     */
+  /*                         FreeType.                                     */
+  /*                                                                       */
+  /*    control_data      :: Certain font drivers can also return the      */
+  /*                         control data for a given glyph image (e.g.    */
+  /*                         TrueType bytecode, Type~1 charstrings, etc.). */
+  /*                         This field is a pointer to such data.         */
+  /*                                                                       */
+  /*    control_len       :: This is the length in bytes of the control    */
+  /*                         data.                                         */
+  /*                                                                       */
+  /*    other             :: Really wicked formats can use this pointer to */
+  /*                         present their own glyph image to client       */
+  /*                         applications.  Note that the application      */
+  /*                         needs to know about the image format.         */
+  /*                                                                       */
+  /*    lsb_delta         :: The difference between hinted and unhinted    */
+  /*                         left side bearing while auto-hinting is       */
+  /*                         active.  Zero otherwise.                      */
+  /*                                                                       */
+  /*    rsb_delta         :: The difference between hinted and unhinted    */
+  /*                         right side bearing while auto-hinting is      */
+  /*                         active.  Zero otherwise.                      */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    If @FT_Load_Glyph is called with default flags (see                */
+  /*    @FT_LOAD_DEFAULT) the glyph image is loaded in the glyph slot in   */
+  /*    its native format (e.g., an outline glyph for TrueType and Type~1  */
+  /*    formats).                                                          */
+  /*                                                                       */
+  /*    This image can later be converted into a bitmap by calling         */
+  /*    @FT_Render_Glyph.  This function finds the current renderer for    */
+  /*    the native image's format, then invokes it.                        */
+  /*                                                                       */
+  /*    The renderer is in charge of transforming the native image through */
+  /*    the slot's face transformation fields, then converting it into a   */
+  /*    bitmap that is returned in `slot->bitmap'.                         */
+  /*                                                                       */
+  /*    Note that `slot->bitmap_left' and `slot->bitmap_top' are also used */
+  /*    to specify the position of the bitmap relative to the current pen  */
+  /*    position (e.g., coordinates (0,0) on the baseline).  Of course,    */
+  /*    `slot->format' is also changed to @FT_GLYPH_FORMAT_BITMAP.         */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Here is a small pseudo code fragment that shows how to use         */
+  /*    `lsb_delta' and `rsb_delta':                                       */
+  /*                                                                       */
+  /*    {                                                                  */
+  /*      FT_Pos  origin_x       = 0;                                      */
+  /*      FT_Pos  prev_rsb_delta = 0;                                      */
+  /*                                                                       */
+  /*                                                                       */
+  /*      for all glyphs do                                                */
+  /*        <compute kern between current and previous glyph and add it to */
+  /*         `origin_x'>                                                   */
+  /*                                                                       */
+  /*        <load glyph with `FT_Load_Glyph'>                              */
+  /*                                                                       */
+  /*        if ( prev_rsb_delta - face->glyph->lsb_delta >= 32 )           */
+  /*          origin_x -= 64;                                              */
+  /*        else if ( prev_rsb_delta - face->glyph->lsb_delta < -32 )      */
+  /*          origin_x += 64;                                              */
+  /*                                                                       */
+  /*        prev_rsb_delta = face->glyph->rsb_delta;                       */
+  /*                                                                       */
+  /*        <save glyph image, or render glyph, or ...>                    */
+  /*                                                                       */
+  /*        origin_x += face->glyph->advance.x;                            */
+  /*      endfor                                                           */
+  /*    }                                                                  */
+  /*                                                                       */
+  typedef struct  FT_GlyphSlotRec_
+  {
+    FT_Library        library;
+    FT_Face           face;
+    FT_GlyphSlot      next;
+    FT_UInt           reserved;       /* retained for binary compatibility */
+    FT_Generic        generic;
+
+    FT_Glyph_Metrics  metrics;
+    FT_Fixed          linearHoriAdvance;
+    FT_Fixed          linearVertAdvance;
+    FT_Vector         advance;
+
+    FT_Glyph_Format   format;
+
+    FT_Bitmap         bitmap;
+    FT_Int            bitmap_left;
+    FT_Int            bitmap_top;
+
+    FT_Outline        outline;
+
+    FT_UInt           num_subglyphs;
+    FT_SubGlyph       subglyphs;
+
+    void*             control_data;
+    long              control_len;
+
+    FT_Pos            lsb_delta;
+    FT_Pos            rsb_delta;
+
+    void*             other;
+
+    FT_Slot_Internal  internal;
+
+  } FT_GlyphSlotRec;
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*                                                                       */
+  /*                         F U N C T I O N S                             */
+  /*                                                                       */
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Init_FreeType                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Initialize a new FreeType library object.  The set of modules      */
+  /*    that are registered by this function is determined at build time.  */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    alibrary :: A handle to a new library object.                      */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    In case you want to provide your own memory allocating routines,   */
+  /*    use @FT_New_Library instead, followed by a call to                 */
+  /*    @FT_Add_Default_Modules (or a series of calls to @FT_Add_Module).  */
+  /*                                                                       */
+  /*    See the documentation of @FT_Library and @FT_Face for              */
+  /*    multi-threading issues.                                            */
+  /*                                                                       */
+  /*    If you need reference-counting (cf. @FT_Reference_Library), use    */
+  /*    @FT_New_Library and @FT_Done_Library.                              */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Init_FreeType( FT_Library  *alibrary );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Done_FreeType                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Destroy a given FreeType library object and all of its children,   */
+  /*    including resources, drivers, faces, sizes, etc.                   */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library :: A handle to the target library object.                  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Done_FreeType( FT_Library  library );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Enum>                                                                */
+  /*    FT_OPEN_XXX                                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A list of bit-field constants used within the `flags' field of the */
+  /*    @FT_Open_Args structure.                                           */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_OPEN_MEMORY   :: This is a memory-based stream.                 */
+  /*                                                                       */
+  /*    FT_OPEN_STREAM   :: Copy the stream from the `stream' field.       */
+  /*                                                                       */
+  /*    FT_OPEN_PATHNAME :: Create a new input stream from a C~path        */
+  /*                        name.                                          */
+  /*                                                                       */
+  /*    FT_OPEN_DRIVER   :: Use the `driver' field.                        */
+  /*                                                                       */
+  /*    FT_OPEN_PARAMS   :: Use the `num_params' and `params' fields.      */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The `FT_OPEN_MEMORY', `FT_OPEN_STREAM', and `FT_OPEN_PATHNAME'     */
+  /*    flags are mutually exclusive.                                      */
+  /*                                                                       */
+#define FT_OPEN_MEMORY    0x1
+#define FT_OPEN_STREAM    0x2
+#define FT_OPEN_PATHNAME  0x4
+#define FT_OPEN_DRIVER    0x8
+#define FT_OPEN_PARAMS    0x10
+
+
+  /* these constants are deprecated; use the corresponding `FT_OPEN_XXX' */
+  /* values instead                                                      */
+#define ft_open_memory    FT_OPEN_MEMORY
+#define ft_open_stream    FT_OPEN_STREAM
+#define ft_open_pathname  FT_OPEN_PATHNAME
+#define ft_open_driver    FT_OPEN_DRIVER
+#define ft_open_params    FT_OPEN_PARAMS
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_Parameter                                                       */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A simple structure used to pass more or less generic parameters to */
+  /*    @FT_Open_Face.                                                     */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    tag  :: A four-byte identification tag.                            */
+  /*                                                                       */
+  /*    data :: A pointer to the parameter data.                           */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The ID and function of parameters are driver-specific.  See the    */
+  /*    various FT_PARAM_TAG_XXX flags for more information.               */
+  /*                                                                       */
+  typedef struct  FT_Parameter_
+  {
+    FT_ULong    tag;
+    FT_Pointer  data;
+
+  } FT_Parameter;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_Open_Args                                                       */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A structure used to indicate how to open a new font file or        */
+  /*    stream.  A pointer to such a structure can be used as a parameter  */
+  /*    for the functions @FT_Open_Face and @FT_Attach_Stream.             */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    flags       :: A set of bit flags indicating how to use the        */
+  /*                   structure.                                          */
+  /*                                                                       */
+  /*    memory_base :: The first byte of the file in memory.               */
+  /*                                                                       */
+  /*    memory_size :: The size in bytes of the file in memory.            */
+  /*                                                                       */
+  /*    pathname    :: A pointer to an 8-bit file pathname.                */
+  /*                                                                       */
+  /*    stream      :: A handle to a source stream object.                 */
+  /*                                                                       */
+  /*    driver      :: This field is exclusively used by @FT_Open_Face;    */
+  /*                   it simply specifies the font driver to use to open  */
+  /*                   the face.  If set to~0, FreeType tries to load the  */
+  /*                   face with each one of the drivers in its list.      */
+  /*                                                                       */
+  /*    num_params  :: The number of extra parameters.                     */
+  /*                                                                       */
+  /*    params      :: Extra parameters passed to the font driver when     */
+  /*                   opening a new face.                                 */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The stream type is determined by the contents of `flags' that      */
+  /*    are tested in the following order by @FT_Open_Face:                */
+  /*                                                                       */
+  /*    If the @FT_OPEN_MEMORY bit is set, assume that this is a           */
+  /*    memory file of `memory_size' bytes, located at `memory_address'.   */
+  /*    The data are are not copied, and the client is responsible for     */
+  /*    releasing and destroying them _after_ the corresponding call to    */
+  /*    @FT_Done_Face.                                                     */
+  /*                                                                       */
+  /*    Otherwise, if the @FT_OPEN_STREAM bit is set, assume that a        */
+  /*    custom input stream `stream' is used.                              */
+  /*                                                                       */
+  /*    Otherwise, if the @FT_OPEN_PATHNAME bit is set, assume that this   */
+  /*    is a normal file and use `pathname' to open it.                    */
+  /*                                                                       */
+  /*    If the @FT_OPEN_DRIVER bit is set, @FT_Open_Face only tries to     */
+  /*    open the file with the driver whose handler is in `driver'.        */
+  /*                                                                       */
+  /*    If the @FT_OPEN_PARAMS bit is set, the parameters given by         */
+  /*    `num_params' and `params' is used.  They are ignored otherwise.    */
+  /*                                                                       */
+  /*    Ideally, both the `pathname' and `params' fields should be tagged  */
+  /*    as `const'; this is missing for API backwards compatibility.  In   */
+  /*    other words, applications should treat them as read-only.          */
+  /*                                                                       */
+  typedef struct  FT_Open_Args_
+  {
+    FT_UInt         flags;
+    const FT_Byte*  memory_base;
+    FT_Long         memory_size;
+    FT_String*      pathname;
+    FT_Stream       stream;
+    FT_Module       driver;
+    FT_Int          num_params;
+    FT_Parameter*   params;
+
+  } FT_Open_Args;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_New_Face                                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This function calls @FT_Open_Face to open a font by its pathname.  */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    library    :: A handle to the library resource.                    */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    pathname   :: A path to the font file.                             */
+  /*                                                                       */
+  /*    face_index :: The index of the face within the font.  The first    */
+  /*                  face has index~0.                                    */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    aface      :: A handle to a new face object.  If `face_index' is   */
+  /*                  greater than or equal to zero, it must be non-NULL.  */
+  /*                  See @FT_Open_Face for more details.                  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Use @FT_Done_Face to destroy the created @FT_Face object (along    */
+  /*    with its slot and sizes).                                          */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_New_Face( FT_Library   library,
+               const char*  filepathname,
+               FT_Long      face_index,
+               FT_Face     *aface );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_New_Memory_Face                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This function calls @FT_Open_Face to open a font that has been     */
+  /*    loaded into memory.                                                */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    library    :: A handle to the library resource.                    */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    file_base  :: A pointer to the beginning of the font data.         */
+  /*                                                                       */
+  /*    file_size  :: The size of the memory chunk used by the font data.  */
+  /*                                                                       */
+  /*    face_index :: The index of the face within the font.  The first    */
+  /*                  face has index~0.                                    */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    aface      :: A handle to a new face object.  If `face_index' is   */
+  /*                  greater than or equal to zero, it must be non-NULL.  */
+  /*                  See @FT_Open_Face for more details.                  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    You must not deallocate the memory before calling @FT_Done_Face.   */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_New_Memory_Face( FT_Library      library,
+                      const FT_Byte*  file_base,
+                      FT_Long         file_size,
+                      FT_Long         face_index,
+                      FT_Face        *aface );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Open_Face                                                       */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Create a face object from a given resource described by            */
+  /*    @FT_Open_Args.                                                     */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    library    :: A handle to the library resource.                    */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    args       :: A pointer to an `FT_Open_Args' structure that must   */
+  /*                  be filled by the caller.                             */
+  /*                                                                       */
+  /*    face_index :: The index of the face within the font.  The first    */
+  /*                  face has index~0.                                    */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    aface      :: A handle to a new face object.  If `face_index' is   */
+  /*                  greater than or equal to zero, it must be non-NULL.  */
+  /*                  See note below.                                      */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Unlike FreeType 1.x, this function automatically creates a glyph   */
+  /*    slot for the face object that can be accessed directly through     */
+  /*    `face->glyph'.                                                     */
+  /*                                                                       */
+  /*    FT_Open_Face can be used to quickly check whether the font         */
+  /*    format of a given font resource is supported by FreeType.  If the  */
+  /*    `face_index' field is negative, the function's return value is~0   */
+  /*    if the font format is recognized, or non-zero otherwise;           */
+  /*    the function returns a more or less empty face handle in `*aface'  */
+  /*    (if `aface' isn't NULL).  The only useful field in this special    */
+  /*    case is `face->num_faces' that gives the number of faces within    */
+  /*    the font file.  After examination, the returned @FT_Face structure */
+  /*    should be deallocated with a call to @FT_Done_Face.                */
+  /*                                                                       */
+  /*    Each new face object created with this function also owns a        */
+  /*    default @FT_Size object, accessible as `face->size'.               */
+  /*                                                                       */
+  /*    One @FT_Library instance can have multiple face objects, this is,  */
+  /*    @FT_Open_Face and its siblings can be called multiple times using  */
+  /*    the same `library' argument.                                       */
+  /*                                                                       */
+  /*    See the discussion of reference counters in the description of     */
+  /*    @FT_Reference_Face.                                                */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Open_Face( FT_Library           library,
+                const FT_Open_Args*  args,
+                FT_Long              face_index,
+                FT_Face             *aface );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Attach_File                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This function calls @FT_Attach_Stream to attach a file.            */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face         :: The target face object.                            */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    filepathname :: The pathname.                                      */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Attach_File( FT_Face      face,
+                  const char*  filepathname );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Attach_Stream                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    `Attach' data to a face object.  Normally, this is used to read    */
+  /*    additional information for the face object.  For example, you can  */
+  /*    attach an AFM file that comes with a Type~1 font to get the        */
+  /*    kerning values and other metrics.                                  */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face       :: The target face object.                              */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    parameters :: A pointer to @FT_Open_Args that must be filled by    */
+  /*                  the caller.                                          */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The meaning of the `attach' (i.e., what really happens when the    */
+  /*    new file is read) is not fixed by FreeType itself.  It really      */
+  /*    depends on the font format (and thus the font driver).             */
+  /*                                                                       */
+  /*    Client applications are expected to know what they are doing       */
+  /*    when invoking this function.  Most drivers simply do not implement */
+  /*    file attachments.                                                  */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Attach_Stream( FT_Face        face,
+                    FT_Open_Args*  parameters );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Reference_Face                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A counter gets initialized to~1 at the time an @FT_Face structure  */
+  /*    is created.  This function increments the counter.  @FT_Done_Face  */
+  /*    then only destroys a face if the counter is~1, otherwise it simply */
+  /*    decrements the counter.                                            */
+  /*                                                                       */
+  /*    This function helps in managing life-cycles of structures that     */
+  /*    reference @FT_Face objects.                                        */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face :: A handle to a target face object.                          */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Since>                                                               */
+  /*    2.4.2                                                              */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Reference_Face( FT_Face  face );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Done_Face                                                       */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Discard a given face object, as well as all of its child slots and */
+  /*    sizes.                                                             */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face :: A handle to a target face object.                          */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    See the discussion of reference counters in the description of     */
+  /*    @FT_Reference_Face.                                                */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Done_Face( FT_Face  face );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Select_Size                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Select a bitmap strike.                                            */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face         :: A handle to a target face object.                  */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    strike_index :: The index of the bitmap strike in the              */
+  /*                    `available_sizes' field of @FT_FaceRec structure.  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Select_Size( FT_Face  face,
+                  FT_Int   strike_index );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Enum>                                                                */
+  /*    FT_Size_Request_Type                                               */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    An enumeration type that lists the supported size request types.   */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_SIZE_REQUEST_TYPE_NOMINAL ::                                    */
+  /*      The nominal size.  The `units_per_EM' field of @FT_FaceRec is    */
+  /*      used to determine both scaling values.                           */
+  /*                                                                       */
+  /*    FT_SIZE_REQUEST_TYPE_REAL_DIM ::                                   */
+  /*      The real dimension.  The sum of the the `ascender' and (minus    */
+  /*      of) the `descender' fields of @FT_FaceRec are used to determine  */
+  /*      both scaling values.                                             */
+  /*                                                                       */
+  /*    FT_SIZE_REQUEST_TYPE_BBOX ::                                       */
+  /*      The font bounding box.  The width and height of the `bbox' field */
+  /*      of @FT_FaceRec are used to determine the horizontal and vertical */
+  /*      scaling value, respectively.                                     */
+  /*                                                                       */
+  /*    FT_SIZE_REQUEST_TYPE_CELL ::                                       */
+  /*      The `max_advance_width' field of @FT_FaceRec is used to          */
+  /*      determine the horizontal scaling value; the vertical scaling     */
+  /*      value is determined the same way as                              */
+  /*      @FT_SIZE_REQUEST_TYPE_REAL_DIM does.  Finally, both scaling      */
+  /*      values are set to the smaller one.  This type is useful if you   */
+  /*      want to specify the font size for, say, a window of a given      */
+  /*      dimension and 80x24 cells.                                       */
+  /*                                                                       */
+  /*    FT_SIZE_REQUEST_TYPE_SCALES ::                                     */
+  /*      Specify the scaling values directly.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The above descriptions only apply to scalable formats.  For bitmap */
+  /*    formats, the behaviour is up to the driver.                        */
+  /*                                                                       */
+  /*    See the note section of @FT_Size_Metrics if you wonder how size    */
+  /*    requesting relates to scaling values.                              */
+  /*                                                                       */
+  typedef enum  FT_Size_Request_Type_
+  {
+    FT_SIZE_REQUEST_TYPE_NOMINAL,
+    FT_SIZE_REQUEST_TYPE_REAL_DIM,
+    FT_SIZE_REQUEST_TYPE_BBOX,
+    FT_SIZE_REQUEST_TYPE_CELL,
+    FT_SIZE_REQUEST_TYPE_SCALES,
+
+    FT_SIZE_REQUEST_TYPE_MAX
+
+  } FT_Size_Request_Type;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_Size_RequestRec                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A structure used to model a size request.                          */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    type           :: See @FT_Size_Request_Type.                       */
+  /*                                                                       */
+  /*    width          :: The desired width.                               */
+  /*                                                                       */
+  /*    height         :: The desired height.                              */
+  /*                                                                       */
+  /*    horiResolution :: The horizontal resolution.  If set to zero,      */
+  /*                      `width' is treated as a 26.6 fractional pixel    */
+  /*                      value.                                           */
+  /*                                                                       */
+  /*    vertResolution :: The vertical resolution.  If set to zero,        */
+  /*                      `height' is treated as a 26.6 fractional pixel   */
+  /*                      value.                                           */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    If `width' is zero, then the horizontal scaling value is set equal */
+  /*    to the vertical scaling value, and vice versa.                     */
+  /*                                                                       */
+  typedef struct  FT_Size_RequestRec_
+  {
+    FT_Size_Request_Type  type;
+    FT_Long               width;
+    FT_Long               height;
+    FT_UInt               horiResolution;
+    FT_UInt               vertResolution;
+
+  } FT_Size_RequestRec;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_Size_Request                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a size request structure.                              */
+  /*                                                                       */
+  typedef struct FT_Size_RequestRec_  *FT_Size_Request;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Request_Size                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Resize the scale of the active @FT_Size object in a face.          */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face :: A handle to a target face object.                          */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    req  :: A pointer to a @FT_Size_RequestRec.                        */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Although drivers may select the bitmap strike matching the         */
+  /*    request, you should not rely on this if you intend to select a     */
+  /*    particular bitmap strike.  Use @FT_Select_Size instead in that     */
+  /*    case.                                                              */
+  /*                                                                       */
+  /*    The relation between the requested size and the resulting glyph    */
+  /*    size is dependent entirely on how the size is defined in the       */
+  /*    source face.  The font designer chooses the final size of each     */
+  /*    glyph relative to this size.  For more information refer to        */
+  /*    `http://www.freetype.org/freetype2/docs/glyphs/glyphs-2.html'      */
+  /*                                                                       */
+  /*    Don't use this function if you are using the FreeType cache API.   */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Request_Size( FT_Face          face,
+                   FT_Size_Request  req );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Set_Char_Size                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This function calls @FT_Request_Size to request the nominal size   */
+  /*    (in points).                                                       */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face            :: A handle to a target face object.               */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    char_width      :: The nominal width, in 26.6 fractional points.   */
+  /*                                                                       */
+  /*    char_height     :: The nominal height, in 26.6 fractional points.  */
+  /*                                                                       */
+  /*    horz_resolution :: The horizontal resolution in dpi.               */
+  /*                                                                       */
+  /*    vert_resolution :: The vertical resolution in dpi.                 */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    If either the character width or height is zero, it is set equal   */
+  /*    to the other value.                                                */
+  /*                                                                       */
+  /*    If either the horizontal or vertical resolution is zero, it is set */
+  /*    equal to the other value.                                          */
+  /*                                                                       */
+  /*    A character width or height smaller than 1pt is set to 1pt; if     */
+  /*    both resolution values are zero, they are set to 72dpi.            */
+  /*                                                                       */
+  /*    Don't use this function if you are using the FreeType cache API.   */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Set_Char_Size( FT_Face     face,
+                    FT_F26Dot6  char_width,
+                    FT_F26Dot6  char_height,
+                    FT_UInt     horz_resolution,
+                    FT_UInt     vert_resolution );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Set_Pixel_Sizes                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This function calls @FT_Request_Size to request the nominal size   */
+  /*    (in pixels).                                                       */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face         :: A handle to the target face object.                */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    pixel_width  :: The nominal width, in pixels.                      */
+  /*                                                                       */
+  /*    pixel_height :: The nominal height, in pixels.                     */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    You should not rely on the resulting glyphs matching, or being     */
+  /*    constrained, to this pixel size.  Refer to @FT_Request_Size to     */
+  /*    understand how requested sizes relate to actual sizes.             */
+  /*                                                                       */
+  /*    Don't use this function if you are using the FreeType cache API.   */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Set_Pixel_Sizes( FT_Face  face,
+                      FT_UInt  pixel_width,
+                      FT_UInt  pixel_height );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Load_Glyph                                                      */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A function used to load a single glyph into the glyph slot of a    */
+  /*    face object.                                                       */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face        :: A handle to the target face object where the glyph  */
+  /*                   is loaded.                                          */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    glyph_index :: The index of the glyph in the font file.  For       */
+  /*                   CID-keyed fonts (either in PS or in CFF format)     */
+  /*                   this argument specifies the CID value.              */
+  /*                                                                       */
+  /*    load_flags  :: A flag indicating what to load for this glyph.  The */
+  /*                   @FT_LOAD_XXX constants can be used to control the   */
+  /*                   glyph loading process (e.g., whether the outline    */
+  /*                   should be scaled, whether to load bitmaps or not,   */
+  /*                   whether to hint the outline, etc).                  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The loaded glyph may be transformed.  See @FT_Set_Transform for    */
+  /*    the details.                                                       */
+  /*                                                                       */
+  /*    For subsetted CID-keyed fonts, `FT_Err_Invalid_Argument' is        */
+  /*    returned for invalid CID values (this is, for CID values that      */
+  /*    don't have a corresponding glyph in the font).  See the discussion */
+  /*    of the @FT_FACE_FLAG_CID_KEYED flag for more details.              */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Load_Glyph( FT_Face   face,
+                 FT_UInt   glyph_index,
+                 FT_Int32  load_flags );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Load_Char                                                       */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A function used to load a single glyph into the glyph slot of a    */
+  /*    face object, according to its character code.                      */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face        :: A handle to a target face object where the glyph    */
+  /*                   is loaded.                                          */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    char_code   :: The glyph's character code, according to the        */
+  /*                   current charmap used in the face.                   */
+  /*                                                                       */
+  /*    load_flags  :: A flag indicating what to load for this glyph.  The */
+  /*                   @FT_LOAD_XXX constants can be used to control the   */
+  /*                   glyph loading process (e.g., whether the outline    */
+  /*                   should be scaled, whether to load bitmaps or not,   */
+  /*                   whether to hint the outline, etc).                  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function simply calls @FT_Get_Char_Index and @FT_Load_Glyph.  */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Load_Char( FT_Face   face,
+                FT_ULong  char_code,
+                FT_Int32  load_flags );
+
+
+  /*************************************************************************
+   *
+   * @enum:
+   *   FT_LOAD_XXX
+   *
+   * @description:
+   *   A list of bit-field constants used with @FT_Load_Glyph to indicate
+   *   what kind of operations to perform during glyph loading.
+   *
+   * @values:
+   *   FT_LOAD_DEFAULT ::
+   *     Corresponding to~0, this value is used as the default glyph load
+   *     operation.  In this case, the following happens:
+   *
+   *     1. FreeType looks for a bitmap for the glyph corresponding to the
+   *        face's current size.  If one is found, the function returns.
+   *        The bitmap data can be accessed from the glyph slot (see note
+   *        below).
+   *
+   *     2. If no embedded bitmap is searched or found, FreeType looks for a
+   *        scalable outline.  If one is found, it is loaded from the font
+   *        file, scaled to device pixels, then `hinted' to the pixel grid
+   *        in order to optimize it.  The outline data can be accessed from
+   *        the glyph slot (see note below).
+   *
+   *     Note that by default, the glyph loader doesn't render outlines into
+   *     bitmaps.  The following flags are used to modify this default
+   *     behaviour to more specific and useful cases.
+   *
+   *   FT_LOAD_NO_SCALE ::
+   *     Don't scale the loaded outline glyph but keep it in font units.
+   *
+   *     This flag implies @FT_LOAD_NO_HINTING and @FT_LOAD_NO_BITMAP, and
+   *     unsets @FT_LOAD_RENDER.
+   *
+   *     If the font is `tricky' (see @FT_FACE_FLAG_TRICKY for more), using
+   *     FT_LOAD_NO_SCALE usually yields meaningless outlines because the
+   *     subglyphs must be scaled and positioned with hinting instructions.
+   *     This can be solved by loading the font without FT_LOAD_NO_SCALE and
+   *     setting the character size to `font->units_per_EM'.
+   *
+   *   FT_LOAD_NO_HINTING ::
+   *     Disable hinting.  This generally generates `blurrier' bitmap glyphs
+   *     when the glyph are rendered in any of the anti-aliased modes.  See
+   *     also the note below.
+   *
+   *     This flag is implied by @FT_LOAD_NO_SCALE.
+   *
+   *   FT_LOAD_RENDER ::
+   *     Call @FT_Render_Glyph after the glyph is loaded.  By default, the
+   *     glyph is rendered in @FT_RENDER_MODE_NORMAL mode.  This can be
+   *     overridden by @FT_LOAD_TARGET_XXX or @FT_LOAD_MONOCHROME.
+   *
+   *     This flag is unset by @FT_LOAD_NO_SCALE.
+   *
+   *   FT_LOAD_NO_BITMAP ::
+   *     Ignore bitmap strikes when loading.  Bitmap-only fonts ignore this
+   *     flag.
+   *
+   *     @FT_LOAD_NO_SCALE always sets this flag.
+   *
+   *   FT_LOAD_VERTICAL_LAYOUT ::
+   *     Load the glyph for vertical text layout.  In particular, the
+   *     `advance' value in the @FT_GlyphSlotRec structure is set to the
+   *     `vertAdvance' value of the `metrics' field.
+   *
+   *     In case @FT_HAS_VERTICAL doesn't return true, you shouldn't use
+   *     this flag currently.  Reason is that in this case vertical metrics
+   *     get synthesized, and those values are not always consistent across
+   *     various font formats.
+   *
+   *   FT_LOAD_FORCE_AUTOHINT ::
+   *     Indicates that the auto-hinter is preferred over the font's native
+   *     hinter.  See also the note below.
+   *
+   *   FT_LOAD_PEDANTIC ::
+   *     Indicates that the font driver should perform pedantic verifications
+   *     during glyph loading.  This is mostly used to detect broken glyphs
+   *     in fonts.  By default, FreeType tries to handle broken fonts also.
+   *
+   *     In particular, errors from the TrueType bytecode engine are not
+   *     passed to the application if this flag is not set; this might
+   *     result in partially hinted or distorted glyphs in case a glyph's
+   *     bytecode is buggy.
+   *
+   *   FT_LOAD_NO_RECURSE ::
+   *     Indicate that the font driver should not load composite glyphs
+   *     recursively.  Instead, it should set the `num_subglyph' and
+   *     `subglyphs' values of the glyph slot accordingly, and set
+   *     `glyph->format' to @FT_GLYPH_FORMAT_COMPOSITE.  The description of
+   *     subglyphs can then be accessed with @FT_Get_SubGlyph_Info.
+   *
+   *     This flag implies @FT_LOAD_NO_SCALE and @FT_LOAD_IGNORE_TRANSFORM.
+   *
+   *   FT_LOAD_IGNORE_TRANSFORM ::
+   *     Indicates that the transform matrix set by @FT_Set_Transform should
+   *     be ignored.
+   *
+   *   FT_LOAD_MONOCHROME ::
+   *     This flag is used with @FT_LOAD_RENDER to indicate that you want to
+   *     render an outline glyph to a 1-bit monochrome bitmap glyph, with
+   *     8~pixels packed into each byte of the bitmap data.
+   *
+   *     Note that this has no effect on the hinting algorithm used.  You
+   *     should rather use @FT_LOAD_TARGET_MONO so that the
+   *     monochrome-optimized hinting algorithm is used.
+   *
+   *   FT_LOAD_LINEAR_DESIGN ::
+   *     Indicates that the `linearHoriAdvance' and `linearVertAdvance'
+   *     fields of @FT_GlyphSlotRec should be kept in font units.  See
+   *     @FT_GlyphSlotRec for details.
+   *
+   *   FT_LOAD_NO_AUTOHINT ::
+   *     Disable auto-hinter.  See also the note below.
+   *
+   *   FT_LOAD_COLOR ::
+   *     This flag is used to request loading of color embedded-bitmap
+   *     images.  The resulting color bitmaps, if available, will have the
+   *     @FT_PIXEL_MODE_BGRA format.  When the flag is not used and color
+   *     bitmaps are found, they will be converted to 256-level gray
+   *     bitmaps transparently.  Those bitmaps will be in the
+   *     @FT_PIXEL_MODE_GRAY format.
+   *
+   *   FT_LOAD_CROP_BITMAP ::
+   *     Ignored.  Deprecated.
+   *
+   *   FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH ::
+   *     Ignored.  Deprecated.
+   *
+   * @note:
+   *   By default, hinting is enabled and the font's native hinter (see
+   *   @FT_FACE_FLAG_HINTER) is preferred over the auto-hinter.  You can
+   *   disable hinting by setting @FT_LOAD_NO_HINTING or change the
+   *   precedence by setting @FT_LOAD_FORCE_AUTOHINT.  You can also set
+   *   @FT_LOAD_NO_AUTOHINT in case you don't want the auto-hinter to be
+   *   used at all.
+   *
+   *   See the description of @FT_FACE_FLAG_TRICKY for a special exception
+   *   (affecting only a handful of Asian fonts).
+   *
+   *   Besides deciding which hinter to use, you can also decide which
+   *   hinting algorithm to use.  See @FT_LOAD_TARGET_XXX for details.
+   *
+   *   Note that the auto-hinter needs a valid Unicode cmap (either a native
+   *   one or synthesized by FreeType) for producing correct results.  If a
+   *   font provides an incorrect mapping (for example, assigning the
+   *   character code U+005A, LATIN CAPITAL LETTER Z, to a glyph depicting a
+   *   mathematical integral sign), the auto-hinter might produce useless
+   *   results.
+   *
+   */
+#define FT_LOAD_DEFAULT                      0x0
+#define FT_LOAD_NO_SCALE                     ( 1L << 0 )
+#define FT_LOAD_NO_HINTING                   ( 1L << 1 )
+#define FT_LOAD_RENDER                       ( 1L << 2 )
+#define FT_LOAD_NO_BITMAP                    ( 1L << 3 )
+#define FT_LOAD_VERTICAL_LAYOUT              ( 1L << 4 )
+#define FT_LOAD_FORCE_AUTOHINT               ( 1L << 5 )
+#define FT_LOAD_CROP_BITMAP                  ( 1L << 6 )
+#define FT_LOAD_PEDANTIC                     ( 1L << 7 )
+#define FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH  ( 1L << 9 )
+#define FT_LOAD_NO_RECURSE                   ( 1L << 10 )
+#define FT_LOAD_IGNORE_TRANSFORM             ( 1L << 11 )
+#define FT_LOAD_MONOCHROME                   ( 1L << 12 )
+#define FT_LOAD_LINEAR_DESIGN                ( 1L << 13 )
+#define FT_LOAD_NO_AUTOHINT                  ( 1L << 15 )
+  /* Bits 16..19 are used by `FT_LOAD_TARGET_' */
+#define FT_LOAD_COLOR                        ( 1L << 20 )
+
+  /* */
+
+  /* used internally only by certain font drivers! */
+#define FT_LOAD_ADVANCE_ONLY                 ( 1L << 8 )
+#define FT_LOAD_SBITS_ONLY                   ( 1L << 14 )
+
+
+  /**************************************************************************
+   *
+   * @enum:
+   *   FT_LOAD_TARGET_XXX
+   *
+   * @description:
+   *   A list of values that are used to select a specific hinting algorithm
+   *   to use by the hinter.  You should OR one of these values to your
+   *   `load_flags' when calling @FT_Load_Glyph.
+   *
+   *   Note that font's native hinters may ignore the hinting algorithm you
+   *   have specified (e.g., the TrueType bytecode interpreter).  You can set
+   *   @FT_LOAD_FORCE_AUTOHINT to ensure that the auto-hinter is used.
+   *
+   *   Also note that @FT_LOAD_TARGET_LIGHT is an exception, in that it
+   *   always implies @FT_LOAD_FORCE_AUTOHINT.
+   *
+   * @values:
+   *   FT_LOAD_TARGET_NORMAL ::
+   *     This corresponds to the default hinting algorithm, optimized for
+   *     standard gray-level rendering.  For monochrome output, use
+   *     @FT_LOAD_TARGET_MONO instead.
+   *
+   *   FT_LOAD_TARGET_LIGHT ::
+   *     A lighter hinting algorithm for non-monochrome modes.  Many
+   *     generated glyphs are more fuzzy but better resemble its original
+   *     shape.  A bit like rendering on Mac OS~X.
+   *
+   *     As a special exception, this target implies @FT_LOAD_FORCE_AUTOHINT.
+   *
+   *   FT_LOAD_TARGET_MONO ::
+   *     Strong hinting algorithm that should only be used for monochrome
+   *     output.  The result is probably unpleasant if the glyph is rendered
+   *     in non-monochrome modes.
+   *
+   *   FT_LOAD_TARGET_LCD ::
+   *     A variant of @FT_LOAD_TARGET_NORMAL optimized for horizontally
+   *     decimated LCD displays.
+   *
+   *   FT_LOAD_TARGET_LCD_V ::
+   *     A variant of @FT_LOAD_TARGET_NORMAL optimized for vertically
+   *     decimated LCD displays.
+   *
+   * @note:
+   *   You should use only _one_ of the FT_LOAD_TARGET_XXX values in your
+   *   `load_flags'.  They can't be ORed.
+   *
+   *   If @FT_LOAD_RENDER is also set, the glyph is rendered in the
+   *   corresponding mode (i.e., the mode that matches the used algorithm
+   *   best).  An exeption is FT_LOAD_TARGET_MONO since it implies
+   *   @FT_LOAD_MONOCHROME.
+   *
+   *   You can use a hinting algorithm that doesn't correspond to the same
+   *   rendering mode.  As an example, it is possible to use the `light'
+   *   hinting algorithm and have the results rendered in horizontal LCD
+   *   pixel mode, with code like
+   *
+   *     {
+   *       FT_Load_Glyph( face, glyph_index,
+   *                      load_flags | FT_LOAD_TARGET_LIGHT );
+   *
+   *       FT_Render_Glyph( face->glyph, FT_RENDER_MODE_LCD );
+   *     }
+   *
+   */
+#define FT_LOAD_TARGET_( x )   ( (FT_Int32)( (x) & 15 ) << 16 )
+
+#define FT_LOAD_TARGET_NORMAL  FT_LOAD_TARGET_( FT_RENDER_MODE_NORMAL )
+#define FT_LOAD_TARGET_LIGHT   FT_LOAD_TARGET_( FT_RENDER_MODE_LIGHT  )
+#define FT_LOAD_TARGET_MONO    FT_LOAD_TARGET_( FT_RENDER_MODE_MONO   )
+#define FT_LOAD_TARGET_LCD     FT_LOAD_TARGET_( FT_RENDER_MODE_LCD    )
+#define FT_LOAD_TARGET_LCD_V   FT_LOAD_TARGET_( FT_RENDER_MODE_LCD_V  )
+
+
+  /**************************************************************************
+   *
+   * @macro:
+   *   FT_LOAD_TARGET_MODE
+   *
+   * @description:
+   *   Return the @FT_Render_Mode corresponding to a given
+   *   @FT_LOAD_TARGET_XXX value.
+   *
+   */
+#define FT_LOAD_TARGET_MODE( x )  ( (FT_Render_Mode)( ( (x) >> 16 ) & 15 ) )
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Set_Transform                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A function used to set the transformation that is applied to glyph */
+  /*    images when they are loaded into a glyph slot through              */
+  /*    @FT_Load_Glyph.                                                    */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face   :: A handle to the source face object.                      */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    matrix :: A pointer to the transformation's 2x2 matrix.  Use~0 for */
+  /*              the identity matrix.                                     */
+  /*    delta  :: A pointer to the translation vector.  Use~0 for the null */
+  /*              vector.                                                  */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The transformation is only applied to scalable image formats after */
+  /*    the glyph has been loaded.  It means that hinting is unaltered by  */
+  /*    the transformation and is performed on the character size given in */
+  /*    the last call to @FT_Set_Char_Size or @FT_Set_Pixel_Sizes.         */
+  /*                                                                       */
+  /*    Note that this also transforms the `face.glyph.advance' field, but */
+  /*    *not* the values in `face.glyph.metrics'.                          */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Set_Transform( FT_Face     face,
+                    FT_Matrix*  matrix,
+                    FT_Vector*  delta );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Enum>                                                                */
+  /*    FT_Render_Mode                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    An enumeration type that lists the render modes supported by       */
+  /*    FreeType~2.  Each mode corresponds to a specific type of scanline  */
+  /*    conversion performed on the outline.                               */
+  /*                                                                       */
+  /*    For bitmap fonts and embedded bitmaps the `bitmap->pixel_mode'     */
+  /*    field in the @FT_GlyphSlotRec structure gives the format of the    */
+  /*    returned bitmap.                                                   */
+  /*                                                                       */
+  /*    All modes except @FT_RENDER_MODE_MONO use 256 levels of opacity.   */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_RENDER_MODE_NORMAL ::                                           */
+  /*      This is the default render mode; it corresponds to 8-bit         */
+  /*      anti-aliased bitmaps.                                            */
+  /*                                                                       */
+  /*    FT_RENDER_MODE_LIGHT ::                                            */
+  /*      This is equivalent to @FT_RENDER_MODE_NORMAL.  It is only        */
+  /*      defined as a separate value because render modes are also used   */
+  /*      indirectly to define hinting algorithm selectors.  See           */
+  /*      @FT_LOAD_TARGET_XXX for details.                                 */
+  /*                                                                       */
+  /*    FT_RENDER_MODE_MONO ::                                             */
+  /*      This mode corresponds to 1-bit bitmaps (with 2~levels of         */
+  /*      opacity).                                                        */
+  /*                                                                       */
+  /*    FT_RENDER_MODE_LCD ::                                              */
+  /*      This mode corresponds to horizontal RGB and BGR sub-pixel        */
+  /*      displays like LCD screens.  It produces 8-bit bitmaps that are   */
+  /*      3~times the width of the original glyph outline in pixels, and   */
+  /*      which use the @FT_PIXEL_MODE_LCD mode.                           */
+  /*                                                                       */
+  /*    FT_RENDER_MODE_LCD_V ::                                            */
+  /*      This mode corresponds to vertical RGB and BGR sub-pixel displays */
+  /*      (like PDA screens, rotated LCD displays, etc.).  It produces     */
+  /*      8-bit bitmaps that are 3~times the height of the original        */
+  /*      glyph outline in pixels and use the @FT_PIXEL_MODE_LCD_V mode.   */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The LCD-optimized glyph bitmaps produced by FT_Render_Glyph can be */
+  /*    filtered to reduce color-fringes by using @FT_Library_SetLcdFilter */
+  /*    (not active in the default builds).  It is up to the caller to     */
+  /*    either call @FT_Library_SetLcdFilter (if available) or do the      */
+  /*    filtering itself.                                                  */
+  /*                                                                       */
+  /*    The selected render mode only affects vector glyphs of a font.     */
+  /*    Embedded bitmaps often have a different pixel mode like            */
+  /*    @FT_PIXEL_MODE_MONO.  You can use @FT_Bitmap_Convert to transform  */
+  /*    them into 8-bit pixmaps.                                           */
+  /*                                                                       */
+  typedef enum  FT_Render_Mode_
+  {
+    FT_RENDER_MODE_NORMAL = 0,
+    FT_RENDER_MODE_LIGHT,
+    FT_RENDER_MODE_MONO,
+    FT_RENDER_MODE_LCD,
+    FT_RENDER_MODE_LCD_V,
+
+    FT_RENDER_MODE_MAX
+
+  } FT_Render_Mode;
+
+
+  /* these constants are deprecated; use the corresponding */
+  /* `FT_Render_Mode' values instead                       */
+#define ft_render_mode_normal  FT_RENDER_MODE_NORMAL
+#define ft_render_mode_mono    FT_RENDER_MODE_MONO
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Render_Glyph                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Convert a given glyph image to a bitmap.  It does so by inspecting */
+  /*    the glyph image format, finding the relevant renderer, and         */
+  /*    invoking it.                                                       */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    slot        :: A handle to the glyph slot containing the image to  */
+  /*                   convert.                                            */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    render_mode :: This is the render mode used to render the glyph    */
+  /*                   image into a bitmap.  See @FT_Render_Mode for a     */
+  /*                   list of possible values.                            */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    To get meaningful results, font scaling values must be set with    */
+  /*    functions like @FT_Set_Char_Size before calling FT_Render_Glyph.   */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Render_Glyph( FT_GlyphSlot    slot,
+                   FT_Render_Mode  render_mode );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Enum>                                                                */
+  /*    FT_Kerning_Mode                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    An enumeration used to specify which kerning values to return in   */
+  /*    @FT_Get_Kerning.                                                   */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_KERNING_DEFAULT  :: Return scaled and grid-fitted kerning       */
+  /*                           distances (value is~0).                     */
+  /*                                                                       */
+  /*    FT_KERNING_UNFITTED :: Return scaled but un-grid-fitted kerning    */
+  /*                           distances.                                  */
+  /*                                                                       */
+  /*    FT_KERNING_UNSCALED :: Return the kerning vector in original font  */
+  /*                           units.                                      */
+  /*                                                                       */
+  typedef enum  FT_Kerning_Mode_
+  {
+    FT_KERNING_DEFAULT  = 0,
+    FT_KERNING_UNFITTED,
+    FT_KERNING_UNSCALED
+
+  } FT_Kerning_Mode;
+
+
+  /* these constants are deprecated; use the corresponding */
+  /* `FT_Kerning_Mode' values instead                      */
+#define ft_kerning_default   FT_KERNING_DEFAULT
+#define ft_kerning_unfitted  FT_KERNING_UNFITTED
+#define ft_kerning_unscaled  FT_KERNING_UNSCALED
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_Kerning                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return the kerning vector between two glyphs of a same face.       */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face        :: A handle to a source face object.                   */
+  /*                                                                       */
+  /*    left_glyph  :: The index of the left glyph in the kern pair.       */
+  /*                                                                       */
+  /*    right_glyph :: The index of the right glyph in the kern pair.      */
+  /*                                                                       */
+  /*    kern_mode   :: See @FT_Kerning_Mode for more information.          */
+  /*                   Determines the scale and dimension of the returned  */
+  /*                   kerning vector.                                     */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    akerning    :: The kerning vector.  This is either in font units   */
+  /*                   or in pixels (26.6 format) for scalable formats,    */
+  /*                   and in pixels for fixed-sizes formats.              */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Only horizontal layouts (left-to-right & right-to-left) are        */
+  /*    supported by this method.  Other layouts, or more sophisticated    */
+  /*    kernings, are out of the scope of this API function -- they can be */
+  /*    implemented through format-specific interfaces.                    */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Get_Kerning( FT_Face     face,
+                  FT_UInt     left_glyph,
+                  FT_UInt     right_glyph,
+                  FT_UInt     kern_mode,
+                  FT_Vector  *akerning );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_Track_Kerning                                               */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return the track kerning for a given face object at a given size.  */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face       :: A handle to a source face object.                    */
+  /*                                                                       */
+  /*    point_size :: The point size in 16.16 fractional points.           */
+  /*                                                                       */
+  /*    degree     :: The degree of tightness.  Increasingly negative      */
+  /*                  values represent tighter track kerning, while        */
+  /*                  increasingly positive values represent looser track  */
+  /*                  kerning.  Value zero means no track kerning.         */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    akerning   :: The kerning in 16.16 fractional points, to be        */
+  /*                  uniformly applied between all glyphs.                */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Currently, only the Type~1 font driver supports track kerning,     */
+  /*    using data from AFM files (if attached with @FT_Attach_File or     */
+  /*    @FT_Attach_Stream).                                                */
+  /*                                                                       */
+  /*    Only very few AFM files come with track kerning data; please refer */
+  /*    to the Adobe's AFM specification for more details.                 */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Get_Track_Kerning( FT_Face    face,
+                        FT_Fixed   point_size,
+                        FT_Int     degree,
+                        FT_Fixed*  akerning );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_Glyph_Name                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Retrieve the ASCII name of a given glyph in a face.  This only     */
+  /*    works for those faces where @FT_HAS_GLYPH_NAMES(face) returns~1.   */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face        :: A handle to a source face object.                   */
+  /*                                                                       */
+  /*    glyph_index :: The glyph index.                                    */
+  /*                                                                       */
+  /*    buffer_max  :: The maximum number of bytes available in the        */
+  /*                   buffer.                                             */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    buffer      :: A pointer to a target buffer where the name is      */
+  /*                   copied to.                                          */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    An error is returned if the face doesn't provide glyph names or if */
+  /*    the glyph index is invalid.  In all cases of failure, the first    */
+  /*    byte of `buffer' is set to~0 to indicate an empty name.            */
+  /*                                                                       */
+  /*    The glyph name is truncated to fit within the buffer if it is too  */
+  /*    long.  The returned string is always zero-terminated.              */
+  /*                                                                       */
+  /*    Be aware that FreeType reorders glyph indices internally so that   */
+  /*    glyph index~0 always corresponds to the `missing glyph' (called    */
+  /*    `.notdef').                                                        */
+  /*                                                                       */
+  /*    This function always returns an error if the config macro          */
+  /*    `FT_CONFIG_OPTION_NO_GLYPH_NAMES' is not defined in `ftoptions.h'. */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Get_Glyph_Name( FT_Face     face,
+                     FT_UInt     glyph_index,
+                     FT_Pointer  buffer,
+                     FT_UInt     buffer_max );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_Postscript_Name                                             */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Retrieve the ASCII PostScript name of a given face, if available.  */
+  /*    This only works with PostScript and TrueType fonts.                */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face :: A handle to the source face object.                        */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    A pointer to the face's PostScript name.  NULL if unavailable.     */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The returned pointer is owned by the face and is destroyed with    */
+  /*    it.                                                                */
+  /*                                                                       */
+  FT_EXPORT( const char* )
+  FT_Get_Postscript_Name( FT_Face  face );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Select_Charmap                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Select a given charmap by its encoding tag (as listed in           */
+  /*    `freetype.h').                                                     */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face     :: A handle to the source face object.                    */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    encoding :: A handle to the selected encoding.                     */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function returns an error if no charmap in the face           */
+  /*    corresponds to the encoding queried here.                          */
+  /*                                                                       */
+  /*    Because many fonts contain more than a single cmap for Unicode     */
+  /*    encoding, this function has some special code to select the one    */
+  /*    that covers Unicode best (`best' in the sense that a UCS-4 cmap is */
+  /*    preferred to a UCS-2 cmap).  It is thus preferable to              */
+  /*    @FT_Set_Charmap in this case.                                      */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Select_Charmap( FT_Face      face,
+                     FT_Encoding  encoding );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Set_Charmap                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Select a given charmap for character code to glyph index mapping.  */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    face    :: A handle to the source face object.                     */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    charmap :: A handle to the selected charmap.                       */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function returns an error if the charmap is not part of       */
+  /*    the face (i.e., if it is not listed in the `face->charmaps'        */
+  /*    table).                                                            */
+  /*                                                                       */
+  /*    It also fails if a type~14 charmap is selected.                    */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Set_Charmap( FT_Face     face,
+                  FT_CharMap  charmap );
+
+
+  /*************************************************************************
+   *
+   * @function:
+   *   FT_Get_Charmap_Index
+   *
+   * @description:
+   *   Retrieve index of a given charmap.
+   *
+   * @input:
+   *   charmap ::
+   *     A handle to a charmap.
+   *
+   * @return:
+   *   The index into the array of character maps within the face to which
+   *   `charmap' belongs.  If an error occurs, -1 is returned.
+   *
+   */
+  FT_EXPORT( FT_Int )
+  FT_Get_Charmap_Index( FT_CharMap  charmap );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_Char_Index                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return the glyph index of a given character code.  This function   */
+  /*    uses a charmap object to do the mapping.                           */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face     :: A handle to the source face object.                    */
+  /*                                                                       */
+  /*    charcode :: The character code.                                    */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The glyph index.  0~means `undefined character code'.              */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    If you use FreeType to manipulate the contents of font files       */
+  /*    directly, be aware that the glyph index returned by this function  */
+  /*    doesn't always correspond to the internal indices used within the  */
+  /*    file.  This is done to ensure that value~0 always corresponds to   */
+  /*    the `missing glyph'.  If the first glyph is not named `.notdef',   */
+  /*    then for Type~1 and Type~42 fonts, `.notdef' will be moved into    */
+  /*    the glyph ID~0 position, and whatever was there will be moved to   */
+  /*    the position `.notdef' had.  For Type~1 fonts, if there is no      */
+  /*    `.notdef' glyph at all, then one will be created at index~0 and    */
+  /*    whatever was there will be moved to the last index -- Type~42      */
+  /*    fonts are considered invalid under this condition.                 */
+  /*                                                                       */
+  FT_EXPORT( FT_UInt )
+  FT_Get_Char_Index( FT_Face   face,
+                     FT_ULong  charcode );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_First_Char                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This function is used to return the first character code in the    */
+  /*    current charmap of a given face.  It also returns the              */
+  /*    corresponding glyph index.                                         */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face    :: A handle to the source face object.                     */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    agindex :: Glyph index of first character code.  0~if charmap is   */
+  /*               empty.                                                  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The charmap's first character code.                                */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    You should use this function with @FT_Get_Next_Char to be able to  */
+  /*    parse all character codes available in a given charmap.  The code  */
+  /*    should look like this:                                             */
+  /*                                                                       */
+  /*    {                                                                  */
+  /*      FT_ULong  charcode;                                              */
+  /*      FT_UInt   gindex;                                                */
+  /*                                                                       */
+  /*                                                                       */
+  /*      charcode = FT_Get_First_Char( face, &gindex );                   */
+  /*      while ( gindex != 0 )                                            */
+  /*      {                                                                */
+  /*        ... do something with (charcode,gindex) pair ...               */
+  /*                                                                       */
+  /*        charcode = FT_Get_Next_Char( face, charcode, &gindex );        */
+  /*      }                                                                */
+  /*    }                                                                  */
+  /*                                                                       */
+  /*    Note that `*agindex' is set to~0 if the charmap is empty.  The     */
+  /*    result itself can be~0 in two cases: if the charmap is empty or    */
+  /*    if the value~0 is the first valid character code.                  */
+  /*                                                                       */
+  FT_EXPORT( FT_ULong )
+  FT_Get_First_Char( FT_Face   face,
+                     FT_UInt  *agindex );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_Next_Char                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This function is used to return the next character code in the     */
+  /*    current charmap of a given face following the value `char_code',   */
+  /*    as well as the corresponding glyph index.                          */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face      :: A handle to the source face object.                   */
+  /*    char_code :: The starting character code.                          */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    agindex   :: Glyph index of next character code.  0~if charmap     */
+  /*                 is empty.                                             */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The charmap's next character code.                                 */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    You should use this function with @FT_Get_First_Char to walk       */
+  /*    over all character codes available in a given charmap.  See the    */
+  /*    note for this function for a simple code example.                  */
+  /*                                                                       */
+  /*    Note that `*agindex' is set to~0 when there are no more codes in   */
+  /*    the charmap.                                                       */
+  /*                                                                       */
+  FT_EXPORT( FT_ULong )
+  FT_Get_Next_Char( FT_Face    face,
+                    FT_ULong   char_code,
+                    FT_UInt   *agindex );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_Name_Index                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return the glyph index of a given glyph name.  This function uses  */
+  /*    driver specific objects to do the translation.                     */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face       :: A handle to the source face object.                  */
+  /*                                                                       */
+  /*    glyph_name :: The glyph name.                                      */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The glyph index.  0~means `undefined character code'.              */
+  /*                                                                       */
+  FT_EXPORT( FT_UInt )
+  FT_Get_Name_Index( FT_Face     face,
+                     FT_String*  glyph_name );
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_SUBGLYPH_FLAG_XXX
+   *
+   * @description:
+   *   A list of constants used to describe subglyphs.  Please refer to the
+   *   TrueType specification for the meaning of the various flags.
+   *
+   * @values:
+   *   FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS ::
+   *   FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES ::
+   *   FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID ::
+   *   FT_SUBGLYPH_FLAG_SCALE ::
+   *   FT_SUBGLYPH_FLAG_XY_SCALE ::
+   *   FT_SUBGLYPH_FLAG_2X2 ::
+   *   FT_SUBGLYPH_FLAG_USE_MY_METRICS ::
+   *
+   */
+#define FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS          1
+#define FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES      2
+#define FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID        4
+#define FT_SUBGLYPH_FLAG_SCALE                   8
+#define FT_SUBGLYPH_FLAG_XY_SCALE             0x40
+#define FT_SUBGLYPH_FLAG_2X2                  0x80
+#define FT_SUBGLYPH_FLAG_USE_MY_METRICS      0x200
+
+
+  /*************************************************************************
+   *
+   * @func:
+   *   FT_Get_SubGlyph_Info
+   *
+   * @description:
+   *   Retrieve a description of a given subglyph.  Only use it if
+   *   `glyph->format' is @FT_GLYPH_FORMAT_COMPOSITE; an error is
+   *   returned otherwise.
+   *
+   * @input:
+   *   glyph ::
+   *     The source glyph slot.
+   *
+   *   sub_index ::
+   *     The index of the subglyph.  Must be less than
+   *     `glyph->num_subglyphs'.
+   *
+   * @output:
+   *   p_index ::
+   *     The glyph index of the subglyph.
+   *
+   *   p_flags ::
+   *     The subglyph flags, see @FT_SUBGLYPH_FLAG_XXX.
+   *
+   *   p_arg1 ::
+   *     The subglyph's first argument (if any).
+   *
+   *   p_arg2 ::
+   *     The subglyph's second argument (if any).
+   *
+   *   p_transform ::
+   *     The subglyph transformation (if any).
+   *
+   * @return:
+   *   FreeType error code.  0~means success.
+   *
+   * @note:
+   *   The values of `*p_arg1', `*p_arg2', and `*p_transform' must be
+   *   interpreted depending on the flags returned in `*p_flags'.  See the
+   *   TrueType specification for details.
+   *
+   */
+  FT_EXPORT( FT_Error )
+  FT_Get_SubGlyph_Info( FT_GlyphSlot  glyph,
+                        FT_UInt       sub_index,
+                        FT_Int       *p_index,
+                        FT_UInt      *p_flags,
+                        FT_Int       *p_arg1,
+                        FT_Int       *p_arg2,
+                        FT_Matrix    *p_transform );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Enum>                                                                */
+  /*    FT_FSTYPE_XXX                                                      */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A list of bit flags used in the `fsType' field of the OS/2 table   */
+  /*    in a TrueType or OpenType font and the `FSType' entry in a         */
+  /*    PostScript font.  These bit flags are returned by                  */
+  /*    @FT_Get_FSType_Flags; they inform client applications of embedding */
+  /*    and subsetting restrictions associated with a font.                */
+  /*                                                                       */
+  /*    See                                                                */
+  /*    http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/FontPolicies.pdf */
+  /*    for more details.                                                  */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_FSTYPE_INSTALLABLE_EMBEDDING ::                                 */
+  /*      Fonts with no fsType bit set may be embedded and permanently     */
+  /*      installed on the remote system by an application.                */
+  /*                                                                       */
+  /*    FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING ::                          */
+  /*      Fonts that have only this bit set must not be modified, embedded */
+  /*      or exchanged in any manner without first obtaining permission of */
+  /*      the font software copyright owner.                               */
+  /*                                                                       */
+  /*    FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING ::                           */
+  /*      If this bit is set, the font may be embedded and temporarily     */
+  /*      loaded on the remote system.  Documents containing Preview &     */
+  /*      Print fonts must be opened `read-only'; no edits can be applied  */
+  /*      to the document.                                                 */
+  /*                                                                       */
+  /*    FT_FSTYPE_EDITABLE_EMBEDDING ::                                    */
+  /*      If this bit is set, the font may be embedded but must only be    */
+  /*      installed temporarily on other systems.  In contrast to Preview  */
+  /*      & Print fonts, documents containing editable fonts may be opened */
+  /*      for reading, editing is permitted, and changes may be saved.     */
+  /*                                                                       */
+  /*    FT_FSTYPE_NO_SUBSETTING ::                                         */
+  /*      If this bit is set, the font may not be subsetted prior to       */
+  /*      embedding.                                                       */
+  /*                                                                       */
+  /*    FT_FSTYPE_BITMAP_EMBEDDING_ONLY ::                                 */
+  /*      If this bit is set, only bitmaps contained in the font may be    */
+  /*      embedded; no outline data may be embedded.  If there are no      */
+  /*      bitmaps available in the font, then the font is unembeddable.    */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    While the fsType flags can indicate that a font may be embedded, a */
+  /*    license with the font vendor may be separately required to use the */
+  /*    font in this way.                                                  */
+  /*                                                                       */
+#define FT_FSTYPE_INSTALLABLE_EMBEDDING         0x0000
+#define FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING  0x0002
+#define FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING   0x0004
+#define FT_FSTYPE_EDITABLE_EMBEDDING            0x0008
+#define FT_FSTYPE_NO_SUBSETTING                 0x0100
+#define FT_FSTYPE_BITMAP_EMBEDDING_ONLY         0x0200
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_FSType_Flags                                                */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return the fsType flags for a font.                                */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face :: A handle to the source face object.                        */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The fsType flags, @FT_FSTYPE_XXX.                                  */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Use this function rather than directly reading the `fs_type' field */
+  /*    in the @PS_FontInfoRec structure, which is only guaranteed to      */
+  /*    return the correct results for Type~1 fonts.                       */
+  /*                                                                       */
+  /* <Since>                                                               */
+  /*    2.3.8                                                              */
+  /*                                                                       */
+  FT_EXPORT( FT_UShort )
+  FT_Get_FSType_Flags( FT_Face  face );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    glyph_variants                                                     */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    Glyph Variants                                                     */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    The FreeType~2 interface to Unicode Ideographic Variation          */
+  /*    Sequences (IVS), using the SFNT cmap format~14.                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Many CJK characters have variant forms.  They are a sort of grey   */
+  /*    area somewhere between being totally irrelevant and semantically   */
+  /*    distinct; for this reason, the Unicode consortium decided to       */
+  /*    introduce Ideographic Variation Sequences (IVS), consisting of a   */
+  /*    Unicode base character and one of 240 variant selectors            */
+  /*    (U+E0100-U+E01EF), instead of further extending the already huge   */
+  /*    code range for CJK characters.                                     */
+  /*                                                                       */
+  /*    An IVS is registered and unique; for further details please refer  */
+  /*    to Unicode Technical Standard #37, the Ideographic Variation       */
+  /*    Database:                                                          */
+  /*                                                                       */
+  /*      http://www.unicode.org/reports/tr37/                             */
+  /*                                                                       */
+  /*    To date (November 2014), the character with the most variants is   */
+  /*    U+9089, having 32 such IVS.                                        */
+  /*                                                                       */
+  /*    Adobe and MS decided to support IVS with a new cmap subtable       */
+  /*    (format~14).  It is an odd subtable because it is not a mapping of */
+  /*    input code points to glyphs, but contains lists of all variants    */
+  /*    supported by the font.                                             */
+  /*                                                                       */
+  /*    A variant may be either `default' or `non-default'.  A default     */
+  /*    variant is the one you will get for that code point if you look it */
+  /*    up in the standard Unicode cmap.  A non-default variant is a       */
+  /*    different glyph.                                                   */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Face_GetCharVariantIndex                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return the glyph index of a given character code as modified by    */
+  /*    the variation selector.                                            */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face ::                                                            */
+  /*      A handle to the source face object.                              */
+  /*                                                                       */
+  /*    charcode ::                                                        */
+  /*      The character code point in Unicode.                             */
+  /*                                                                       */
+  /*    variantSelector ::                                                 */
+  /*      The Unicode code point of the variation selector.                */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The glyph index.  0~means either `undefined character code', or    */
+  /*    `undefined selector code', or `no variation selector cmap          */
+  /*    subtable', or `current CharMap is not Unicode'.                    */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    If you use FreeType to manipulate the contents of font files       */
+  /*    directly, be aware that the glyph index returned by this function  */
+  /*    doesn't always correspond to the internal indices used within      */
+  /*    the file.  This is done to ensure that value~0 always corresponds  */
+  /*    to the `missing glyph'.                                            */
+  /*                                                                       */
+  /*    This function is only meaningful if                                */
+  /*      a) the font has a variation selector cmap sub table,             */
+  /*    and                                                                */
+  /*      b) the current charmap has a Unicode encoding.                   */
+  /*                                                                       */
+  /* <Since>                                                               */
+  /*    2.3.6                                                              */
+  /*                                                                       */
+  FT_EXPORT( FT_UInt )
+  FT_Face_GetCharVariantIndex( FT_Face   face,
+                               FT_ULong  charcode,
+                               FT_ULong  variantSelector );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Face_GetCharVariantIsDefault                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Check whether this variant of this Unicode character is the one to */
+  /*    be found in the `cmap'.                                            */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face ::                                                            */
+  /*      A handle to the source face object.                              */
+  /*                                                                       */
+  /*    charcode ::                                                        */
+  /*      The character codepoint in Unicode.                              */
+  /*                                                                       */
+  /*    variantSelector ::                                                 */
+  /*      The Unicode codepoint of the variation selector.                 */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    1~if found in the standard (Unicode) cmap, 0~if found in the       */
+  /*    variation selector cmap, or -1 if it is not a variant.             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function is only meaningful if the font has a variation       */
+  /*    selector cmap subtable.                                            */
+  /*                                                                       */
+  /* <Since>                                                               */
+  /*    2.3.6                                                              */
+  /*                                                                       */
+  FT_EXPORT( FT_Int )
+  FT_Face_GetCharVariantIsDefault( FT_Face   face,
+                                   FT_ULong  charcode,
+                                   FT_ULong  variantSelector );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Face_GetVariantSelectors                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return a zero-terminated list of Unicode variant selectors found   */
+  /*    in the font.                                                       */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face ::                                                            */
+  /*      A handle to the source face object.                              */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    A pointer to an array of selector code points, or NULL if there is */
+  /*    no valid variant selector cmap subtable.                           */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The last item in the array is~0; the array is owned by the         */
+  /*    @FT_Face object but can be overwritten or released on the next     */
+  /*    call to a FreeType function.                                       */
+  /*                                                                       */
+  /* <Since>                                                               */
+  /*    2.3.6                                                              */
+  /*                                                                       */
+  FT_EXPORT( FT_UInt32* )
+  FT_Face_GetVariantSelectors( FT_Face  face );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Face_GetVariantsOfChar                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return a zero-terminated list of Unicode variant selectors found   */
+  /*    for the specified character code.                                  */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face ::                                                            */
+  /*      A handle to the source face object.                              */
+  /*                                                                       */
+  /*    charcode ::                                                        */
+  /*      The character codepoint in Unicode.                              */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    A pointer to an array of variant selector code points that are     */
+  /*    active for the given character, or NULL if the corresponding list  */
+  /*    is empty.                                                          */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The last item in the array is~0; the array is owned by the         */
+  /*    @FT_Face object but can be overwritten or released on the next     */
+  /*    call to a FreeType function.                                       */
+  /*                                                                       */
+  /* <Since>                                                               */
+  /*    2.3.6                                                              */
+  /*                                                                       */
+  FT_EXPORT( FT_UInt32* )
+  FT_Face_GetVariantsOfChar( FT_Face   face,
+                             FT_ULong  charcode );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Face_GetCharsOfVariant                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return a zero-terminated list of Unicode character codes found for */
+  /*    the specified variant selector.                                    */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face ::                                                            */
+  /*      A handle to the source face object.                              */
+  /*                                                                       */
+  /*    variantSelector ::                                                 */
+  /*      The variant selector code point in Unicode.                      */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    A list of all the code points that are specified by this selector  */
+  /*    (both default and non-default codes are returned) or NULL if there */
+  /*    is no valid cmap or the variant selector is invalid.               */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The last item in the array is~0; the array is owned by the         */
+  /*    @FT_Face object but can be overwritten or released on the next     */
+  /*    call to a FreeType function.                                       */
+  /*                                                                       */
+  /* <Since>                                                               */
+  /*    2.3.6                                                              */
+  /*                                                                       */
+  FT_EXPORT( FT_UInt32* )
+  FT_Face_GetCharsOfVariant( FT_Face   face,
+                             FT_ULong  variantSelector );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    computations                                                       */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    Computations                                                       */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    Crunching fixed numbers and vectors.                               */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section contains various functions used to perform            */
+  /*    computations on 16.16 fixed-float numbers or 2d vectors.           */
+  /*                                                                       */
+  /* <Order>                                                               */
+  /*    FT_MulDiv                                                          */
+  /*    FT_MulFix                                                          */
+  /*    FT_DivFix                                                          */
+  /*    FT_RoundFix                                                        */
+  /*    FT_CeilFix                                                         */
+  /*    FT_FloorFix                                                        */
+  /*    FT_Vector_Transform                                                */
+  /*    FT_Matrix_Multiply                                                 */
+  /*    FT_Matrix_Invert                                                   */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_MulDiv                                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A very simple function used to perform the computation `(a*b)/c'   */
+  /*    with maximum accuracy (it uses a 64-bit intermediate integer       */
+  /*    whenever necessary).                                               */
+  /*                                                                       */
+  /*    This function isn't necessarily as fast as some processor specific */
+  /*    operations, but is at least completely portable.                   */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    a :: The first multiplier.                                         */
+  /*    b :: The second multiplier.                                        */
+  /*    c :: The divisor.                                                  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The result of `(a*b)/c'.  This function never traps when trying to */
+  /*    divide by zero; it simply returns `MaxInt' or `MinInt' depending   */
+  /*    on the signs of `a' and `b'.                                       */
+  /*                                                                       */
+  FT_EXPORT( FT_Long )
+  FT_MulDiv( FT_Long  a,
+             FT_Long  b,
+             FT_Long  c );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_MulFix                                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A very simple function used to perform the computation             */
+  /*    `(a*b)/0x10000' with maximum accuracy.  Most of the time this is   */
+  /*    used to multiply a given value by a 16.16 fixed-point factor.      */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    a :: The first multiplier.                                         */
+  /*    b :: The second multiplier.  Use a 16.16 factor here whenever      */
+  /*         possible (see note below).                                    */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The result of `(a*b)/0x10000'.                                     */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function has been optimized for the case where the absolute   */
+  /*    value of `a' is less than 2048, and `b' is a 16.16 scaling factor. */
+  /*    As this happens mainly when scaling from notional units to         */
+  /*    fractional pixels in FreeType, it resulted in noticeable speed     */
+  /*    improvements between versions 2.x and 1.x.                         */
+  /*                                                                       */
+  /*    As a conclusion, always try to place a 16.16 factor as the         */
+  /*    _second_ argument of this function; this can make a great          */
+  /*    difference.                                                        */
+  /*                                                                       */
+  FT_EXPORT( FT_Long )
+  FT_MulFix( FT_Long  a,
+             FT_Long  b );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_DivFix                                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A very simple function used to perform the computation             */
+  /*    `(a*0x10000)/b' with maximum accuracy.  Most of the time, this is  */
+  /*    used to divide a given value by a 16.16 fixed-point factor.        */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    a :: The numerator.                                                */
+  /*    b :: The denominator.  Use a 16.16 factor here.                    */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The result of `(a*0x10000)/b'.                                     */
+  /*                                                                       */
+  FT_EXPORT( FT_Long )
+  FT_DivFix( FT_Long  a,
+             FT_Long  b );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_RoundFix                                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A very simple function used to round a 16.16 fixed number.         */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    a :: The number to be rounded.                                     */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The result of `(a + 0x8000) & -0x10000'.                           */
+  /*                                                                       */
+  FT_EXPORT( FT_Fixed )
+  FT_RoundFix( FT_Fixed  a );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_CeilFix                                                         */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A very simple function used to compute the ceiling function of a   */
+  /*    16.16 fixed number.                                                */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    a :: The number for which the ceiling function is to be computed.  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The result of `(a + 0x10000 - 1) & -0x10000'.                      */
+  /*                                                                       */
+  FT_EXPORT( FT_Fixed )
+  FT_CeilFix( FT_Fixed  a );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_FloorFix                                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A very simple function used to compute the floor function of a     */
+  /*    16.16 fixed number.                                                */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    a :: The number for which the floor function is to be computed.    */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The result of `a & -0x10000'.                                      */
+  /*                                                                       */
+  FT_EXPORT( FT_Fixed )
+  FT_FloorFix( FT_Fixed  a );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Vector_Transform                                                */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Transform a single vector through a 2x2 matrix.                    */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    vector :: The target vector to transform.                          */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    matrix :: A pointer to the source 2x2 matrix.                      */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The result is undefined if either `vector' or `matrix' is invalid. */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Vector_Transform( FT_Vector*        vec,
+                       const FT_Matrix*  matrix );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    version                                                            */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    FreeType Version                                                   */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    Functions and macros related to FreeType versions.                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Note that those functions and macros are of limited use because    */
+  /*    even a new release of FreeType with only documentation changes     */
+  /*    increases the version number.                                      */
+  /*                                                                       */
+  /* <Order>                                                               */
+  /*    FT_Library_Version                                                 */
+  /*                                                                       */
+  /*    FREETYPE_MAJOR                                                     */
+  /*    FREETYPE_MINOR                                                     */
+  /*    FREETYPE_PATCH                                                     */
+  /*                                                                       */
+  /*    FT_Face_CheckTrueTypePatents                                       */
+  /*    FT_Face_SetUnpatentedHinting                                       */
+  /*                                                                       */
+  /*    FREETYPE_XXX                                                       */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************
+   *
+   * @enum:
+   *   FREETYPE_XXX
+   *
+   * @description:
+   *   These three macros identify the FreeType source code version.
+   *   Use @FT_Library_Version to access them at runtime.
+   *
+   * @values:
+   *   FREETYPE_MAJOR :: The major version number.
+   *   FREETYPE_MINOR :: The minor version number.
+   *   FREETYPE_PATCH :: The patch level.
+   *
+   * @note:
+   *   The version number of FreeType if built as a dynamic link library
+   *   with the `libtool' package is _not_ controlled by these three
+   *   macros.
+   *
+   */
+#define FREETYPE_MAJOR  2
+#define FREETYPE_MINOR  6
+#define FREETYPE_PATCH  0
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Library_Version                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return the version of the FreeType library being used.  This is    */
+  /*    useful when dynamically linking to the library, since one cannot   */
+  /*    use the macros @FREETYPE_MAJOR, @FREETYPE_MINOR, and               */
+  /*    @FREETYPE_PATCH.                                                   */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library :: A source library handle.                                */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    amajor  :: The major version number.                               */
+  /*                                                                       */
+  /*    aminor  :: The minor version number.                               */
+  /*                                                                       */
+  /*    apatch  :: The patch version number.                               */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The reason why this function takes a `library' argument is because */
+  /*    certain programs implement library initialization in a custom way  */
+  /*    that doesn't use @FT_Init_FreeType.                                */
+  /*                                                                       */
+  /*    In such cases, the library version might not be available before   */
+  /*    the library object has been created.                               */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Library_Version( FT_Library   library,
+                      FT_Int      *amajor,
+                      FT_Int      *aminor,
+                      FT_Int      *apatch );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Face_CheckTrueTypePatents                                       */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Parse all bytecode instructions of a TrueType font file to check   */
+  /*    whether any of the patented opcodes are used.  This is only useful */
+  /*    if you want to be able to use the unpatented hinter with           */
+  /*    fonts that do *not* use these opcodes.                             */
+  /*                                                                       */
+  /*    Note that this function parses *all* glyph instructions in the     */
+  /*    font file, which may be slow.                                      */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face :: A face handle.                                             */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    1~if this is a TrueType font that uses one of the patented         */
+  /*    opcodes, 0~otherwise.                                              */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Since May 2010, TrueType hinting is no longer patented.            */
+  /*                                                                       */
+  /* <Since>                                                               */
+  /*    2.3.5                                                              */
+  /*                                                                       */
+  FT_EXPORT( FT_Bool )
+  FT_Face_CheckTrueTypePatents( FT_Face  face );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Face_SetUnpatentedHinting                                       */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Enable or disable the unpatented hinter for a given face.          */
+  /*    Only enable it if you have determined that the face doesn't        */
+  /*    use any patented opcodes (see @FT_Face_CheckTrueTypePatents).      */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face  :: A face handle.                                            */
+  /*                                                                       */
+  /*    value :: New boolean setting.                                      */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    The old setting value.  This will always be false if this is not   */
+  /*    an SFNT font, or if the unpatented hinter is not compiled in this  */
+  /*    instance of the library.                                           */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Since May 2010, TrueType hinting is no longer patented.            */
+  /*                                                                       */
+  /* <Since>                                                               */
+  /*    2.3.5                                                              */
+  /*                                                                       */
+  FT_EXPORT( FT_Bool )
+  FT_Face_SetUnpatentedHinting( FT_Face  face,
+                                FT_Bool  value );
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FREETYPE_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ft2build.h b/darwin-x86_64/freetype/include/freetype2/ft2build.h
new file mode 100644
index 0000000..09c19d4
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ft2build.h
@@ -0,0 +1,42 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ft2build.h                                                             */
+/*                                                                         */
+/*    FreeType 2 build and setup macros.                                   */
+/*                                                                         */
+/*  Copyright 1996-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* This is the `entry point' for FreeType header file inclusions.  It is */
+  /* the only header file which should be included directly; all other     */
+  /* FreeType header files should be accessed with macro names (after      */
+  /* including `ft2build.h').                                              */
+  /*                                                                       */
+  /* A typical example is                                                  */
+  /*                                                                       */
+  /*   #include <ft2build.h>                                               */
+  /*   #include FT_FREETYPE_H                                              */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+#ifndef __FT2BUILD_H__
+#define __FT2BUILD_H__
+
+#include <config/ftheader.h>
+
+#endif /* __FT2BUILD_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftadvanc.h b/darwin-x86_64/freetype/include/freetype2/ftadvanc.h
new file mode 100644
index 0000000..b4d2aed
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftadvanc.h
@@ -0,0 +1,187 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftadvanc.h                                                             */
+/*                                                                         */
+/*    Quick computation of advance widths (specification only).            */
+/*                                                                         */
+/*  Copyright 2008-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTADVANC_H__
+#define __FTADVANC_H__
+
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /**************************************************************************
+   *
+   * @section:
+   *   quick_advance
+   *
+   * @title:
+   *   Quick retrieval of advance values
+   *
+   * @abstract:
+   *   Retrieve horizontal and vertical advance values without processing
+   *   glyph outlines, if possible.
+   *
+   * @description:
+   *   This section contains functions to quickly extract advance values
+   *   without handling glyph outlines, if possible.
+   *
+   * @order:
+   *   FT_Get_Advance
+   *   FT_Get_Advances
+   *
+   */
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Const>                                                               */
+  /*    FT_ADVANCE_FLAG_FAST_ONLY                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A bit-flag to be OR-ed with the `flags' parameter of the           */
+  /*    @FT_Get_Advance and @FT_Get_Advances functions.                    */
+  /*                                                                       */
+  /*    If set, it indicates that you want these functions to fail if the  */
+  /*    corresponding hinting mode or font driver doesn't allow for very   */
+  /*    quick advance computation.                                         */
+  /*                                                                       */
+  /*    Typically, glyphs that are either unscaled, unhinted, bitmapped,   */
+  /*    or light-hinted can have their advance width computed very         */
+  /*    quickly.                                                           */
+  /*                                                                       */
+  /*    Normal and bytecode hinted modes that require loading, scaling,    */
+  /*    and hinting of the glyph outline, are extremely slow by            */
+  /*    comparison.                                                        */
+  /*                                                                       */
+#define FT_ADVANCE_FLAG_FAST_ONLY  0x20000000L
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_Advance                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Retrieve the advance value of a given glyph outline in an          */
+  /*    @FT_Face.                                                          */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face       :: The source @FT_Face handle.                          */
+  /*                                                                       */
+  /*    gindex     :: The glyph index.                                     */
+  /*                                                                       */
+  /*    load_flags :: A set of bit flags similar to those used when        */
+  /*                  calling @FT_Load_Glyph, used to determine what kind  */
+  /*                  of advances you need.                                */
+  /* <Output>                                                              */
+  /*    padvance :: The advance value.  If scaling is performed (based on  */
+  /*                the value of `load_flags'), the advance value is in    */
+  /*                16.16 format.  Otherwise, it is in font units.         */
+  /*                                                                       */
+  /*                If @FT_LOAD_VERTICAL_LAYOUT is set, this is the        */
+  /*                vertical advance corresponding to a vertical layout.   */
+  /*                Otherwise, it is the horizontal advance in a           */
+  /*                horizontal layout.                                     */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0 means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function may fail if you use @FT_ADVANCE_FLAG_FAST_ONLY and   */
+  /*    if the corresponding font backend doesn't have a quick way to      */
+  /*    retrieve the advances.                                             */
+  /*                                                                       */
+  /*    A scaled advance is returned in 16.16 format but isn't transformed */
+  /*    by the affine transformation specified by @FT_Set_Transform.       */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Get_Advance( FT_Face    face,
+                  FT_UInt    gindex,
+                  FT_Int32   load_flags,
+                  FT_Fixed  *padvance );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_Advances                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Retrieve the advance values of several glyph outlines in an        */
+  /*    @FT_Face.                                                          */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    face        :: The source @FT_Face handle.                         */
+  /*                                                                       */
+  /*    start       :: The first glyph index.                              */
+  /*                                                                       */
+  /*    count       :: The number of advance values you want to retrieve.  */
+  /*                                                                       */
+  /*    load_flags  :: A set of bit flags similar to those used when       */
+  /*                   calling @FT_Load_Glyph.                             */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    padvance :: The advance values.  This array, to be provided by the */
+  /*                caller, must contain at least `count' elements.        */
+  /*                                                                       */
+  /*                If scaling is performed (based on the value of         */
+  /*                `load_flags'), the advance values are in 16.16 format. */
+  /*                Otherwise, they are in font units.                     */
+  /*                                                                       */
+  /*                If @FT_LOAD_VERTICAL_LAYOUT is set, these are the      */
+  /*                vertical advances corresponding to a vertical layout.  */
+  /*                Otherwise, they are the horizontal advances in a       */
+  /*                horizontal layout.                                     */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0 means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function may fail if you use @FT_ADVANCE_FLAG_FAST_ONLY and   */
+  /*    if the corresponding font backend doesn't have a quick way to      */
+  /*    retrieve the advances.                                             */
+  /*                                                                       */
+  /*    Scaled advances are returned in 16.16 format but aren't            */
+  /*    transformed by the affine transformation specified by              */
+  /*    @FT_Set_Transform.                                                 */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Get_Advances( FT_Face    face,
+                   FT_UInt    start,
+                   FT_UInt    count,
+                   FT_Int32   load_flags,
+                   FT_Fixed  *padvances );
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTADVANC_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftautoh.h b/darwin-x86_64/freetype/include/freetype2/ftautoh.h
new file mode 100644
index 0000000..cf7b76f
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftautoh.h
@@ -0,0 +1,450 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftautoh.h                                                              */
+/*                                                                         */
+/*    FreeType API for controlling the auto-hinter (specification only).   */
+/*                                                                         */
+/*  Copyright 2012-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTAUTOH_H__
+#define __FTAUTOH_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /**************************************************************************
+   *
+   * @section:
+   *   auto_hinter
+   *
+   * @title:
+   *   The auto-hinter
+   *
+   * @abstract:
+   *   Controlling the auto-hinting module.
+   *
+   * @description:
+   *   While FreeType's auto-hinter doesn't expose API functions by itself,
+   *   it is possible to control its behaviour with @FT_Property_Set and
+   *   @FT_Property_Get.  The following lists the available properties
+   *   together with the necessary macros and structures.
+   *
+   *   Note that the auto-hinter's module name is `autofitter' for
+   *   historical reasons.
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   glyph-to-script-map
+   *
+   * @description:
+   *   *Experimental* *only*
+   *
+   *   The auto-hinter provides various script modules to hint glyphs.
+   *   Examples of supported scripts are Latin or CJK.  Before a glyph is
+   *   auto-hinted, the Unicode character map of the font gets examined, and
+   *   the script is then determined based on Unicode character ranges, see
+   *   below.
+   *
+   *   OpenType fonts, however, often provide much more glyphs than
+   *   character codes (small caps, superscripts, ligatures, swashes, etc.),
+   *   to be controlled by so-called `features'.  Handling OpenType features
+   *   can be quite complicated and thus needs a separate library on top of
+   *   FreeType.
+   *
+   *   The mapping between glyph indices and scripts (in the auto-hinter
+   *   sense, see the @FT_AUTOHINTER_SCRIPT_XXX values) is stored as an
+   *   array with `num_glyphs' elements, as found in the font's @FT_Face
+   *   structure.  The `glyph-to-script-map' property returns a pointer to
+   *   this array, which can be modified as needed.  Note that the
+   *   modification should happen before the first glyph gets processed by
+   *   the auto-hinter so that the global analysis of the font shapes
+   *   actually uses the modified mapping.
+   *
+   *   The following example code demonstrates how to access it (omitting
+   *   the error handling).
+   *
+   *   {
+   *     FT_Library                library;
+   *     FT_Face                   face;
+   *     FT_Prop_GlyphToScriptMap  prop;
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *     FT_New_Face( library, "foo.ttf", 0, &face );
+   *
+   *     prop.face = face;
+   *
+   *     FT_Property_Get( library, "autofitter",
+   *                               "glyph-to-script-map", &prop );
+   *
+   *     // adjust `prop.map' as needed right here
+   *
+   *     FT_Load_Glyph( face, ..., FT_LOAD_FORCE_AUTOHINT );
+   *   }
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @enum:
+   *   FT_AUTOHINTER_SCRIPT_XXX
+   *
+   * @description:
+   *   *Experimental* *only*
+   *
+   *   A list of constants used for the @glyph-to-script-map property to
+   *   specify the script submodule the auto-hinter should use for hinting a
+   *   particular glyph.
+   *
+   * @values:
+   *   FT_AUTOHINTER_SCRIPT_NONE ::
+   *     Don't auto-hint this glyph.
+   *
+   *   FT_AUTOHINTER_SCRIPT_LATIN ::
+   *     Apply the latin auto-hinter.  For the auto-hinter, `latin' is a
+   *     very broad term, including Cyrillic and Greek also since characters
+   *     from those scripts share the same design constraints.
+   *
+   *     By default, characters from the following Unicode ranges are
+   *     assigned to this submodule.
+   *
+   *     {
+   *       U+0020 - U+007F  // Basic Latin (no control characters)
+   *       U+00A0 - U+00FF  // Latin-1 Supplement (no control characters)
+   *       U+0100 - U+017F  // Latin Extended-A
+   *       U+0180 - U+024F  // Latin Extended-B
+   *       U+0250 - U+02AF  // IPA Extensions
+   *       U+02B0 - U+02FF  // Spacing Modifier Letters
+   *       U+0300 - U+036F  // Combining Diacritical Marks
+   *       U+0370 - U+03FF  // Greek and Coptic
+   *       U+0400 - U+04FF  // Cyrillic
+   *       U+0500 - U+052F  // Cyrillic Supplement
+   *       U+1D00 - U+1D7F  // Phonetic Extensions
+   *       U+1D80 - U+1DBF  // Phonetic Extensions Supplement
+   *       U+1DC0 - U+1DFF  // Combining Diacritical Marks Supplement
+   *       U+1E00 - U+1EFF  // Latin Extended Additional
+   *       U+1F00 - U+1FFF  // Greek Extended
+   *       U+2000 - U+206F  // General Punctuation
+   *       U+2070 - U+209F  // Superscripts and Subscripts
+   *       U+20A0 - U+20CF  // Currency Symbols
+   *       U+2150 - U+218F  // Number Forms
+   *       U+2460 - U+24FF  // Enclosed Alphanumerics
+   *       U+2C60 - U+2C7F  // Latin Extended-C
+   *       U+2DE0 - U+2DFF  // Cyrillic Extended-A
+   *       U+2E00 - U+2E7F  // Supplemental Punctuation
+   *       U+A640 - U+A69F  // Cyrillic Extended-B
+   *       U+A720 - U+A7FF  // Latin Extended-D
+   *       U+FB00 - U+FB06  // Alphab. Present. Forms (Latin Ligatures)
+   *      U+1D400 - U+1D7FF // Mathematical Alphanumeric Symbols
+   *      U+1F100 - U+1F1FF // Enclosed Alphanumeric Supplement
+   *     }
+   *
+   *   FT_AUTOHINTER_SCRIPT_CJK ::
+   *     Apply the CJK auto-hinter, covering Chinese, Japanese, Korean, old
+   *     Vietnamese, and some other scripts.
+   *
+   *     By default, characters from the following Unicode ranges are
+   *     assigned to this submodule.
+   *
+   *     {
+   *       U+1100 - U+11FF  // Hangul Jamo
+   *       U+2E80 - U+2EFF  // CJK Radicals Supplement
+   *       U+2F00 - U+2FDF  // Kangxi Radicals
+   *       U+2FF0 - U+2FFF  // Ideographic Description Characters
+   *       U+3000 - U+303F  // CJK Symbols and Punctuation
+   *       U+3040 - U+309F  // Hiragana
+   *       U+30A0 - U+30FF  // Katakana
+   *       U+3100 - U+312F  // Bopomofo
+   *       U+3130 - U+318F  // Hangul Compatibility Jamo
+   *       U+3190 - U+319F  // Kanbun
+   *       U+31A0 - U+31BF  // Bopomofo Extended
+   *       U+31C0 - U+31EF  // CJK Strokes
+   *       U+31F0 - U+31FF  // Katakana Phonetic Extensions
+   *       U+3200 - U+32FF  // Enclosed CJK Letters and Months
+   *       U+3300 - U+33FF  // CJK Compatibility
+   *       U+3400 - U+4DBF  // CJK Unified Ideographs Extension A
+   *       U+4DC0 - U+4DFF  // Yijing Hexagram Symbols
+   *       U+4E00 - U+9FFF  // CJK Unified Ideographs
+   *       U+A960 - U+A97F  // Hangul Jamo Extended-A
+   *       U+AC00 - U+D7AF  // Hangul Syllables
+   *       U+D7B0 - U+D7FF  // Hangul Jamo Extended-B
+   *       U+F900 - U+FAFF  // CJK Compatibility Ideographs
+   *       U+FE10 - U+FE1F  // Vertical forms
+   *       U+FE30 - U+FE4F  // CJK Compatibility Forms
+   *       U+FF00 - U+FFEF  // Halfwidth and Fullwidth Forms
+   *      U+1B000 - U+1B0FF // Kana Supplement
+   *      U+1D300 - U+1D35F // Tai Xuan Hing Symbols
+   *      U+1F200 - U+1F2FF // Enclosed Ideographic Supplement
+   *      U+20000 - U+2A6DF // CJK Unified Ideographs Extension B
+   *      U+2A700 - U+2B73F // CJK Unified Ideographs Extension C
+   *      U+2B740 - U+2B81F // CJK Unified Ideographs Extension D
+   *      U+2F800 - U+2FA1F // CJK Compatibility Ideographs Supplement
+   *     }
+   *
+   *   FT_AUTOHINTER_SCRIPT_INDIC ::
+   *     Apply the indic auto-hinter, covering all major scripts from the
+   *     Indian sub-continent and some other related scripts like Thai, Lao,
+   *     or Tibetan.
+   *
+   *     By default, characters from the following Unicode ranges are
+   *     assigned to this submodule.
+   *
+   *     {
+   *       U+0900 - U+0DFF  // Indic Range
+   *       U+0F00 - U+0FFF  // Tibetan
+   *       U+1900 - U+194F  // Limbu
+   *       U+1B80 - U+1BBF  // Sundanese
+   *       U+1C80 - U+1CDF  // Meetei Mayak
+   *       U+A800 - U+A82F  // Syloti Nagri
+   *      U+11800 - U+118DF // Sharada
+   *     }
+   *
+   *     Note that currently Indic support is rudimentary only, missing blue
+   *     zone support.
+   *
+   */
+#define FT_AUTOHINTER_SCRIPT_NONE   0
+#define FT_AUTOHINTER_SCRIPT_LATIN  1
+#define FT_AUTOHINTER_SCRIPT_CJK    2
+#define FT_AUTOHINTER_SCRIPT_INDIC  3
+
+
+  /**************************************************************************
+   *
+   * @struct:
+   *   FT_Prop_GlyphToScriptMap
+   *
+   * @description:
+   *   *Experimental* *only*
+   *
+   *   The data exchange structure for the @glyph-to-script-map property.
+   *
+   */
+  typedef struct  FT_Prop_GlyphToScriptMap_
+  {
+    FT_Face   face;
+    FT_Byte*  map;
+
+  } FT_Prop_GlyphToScriptMap;
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   fallback-script
+   *
+   * @description:
+   *   *Experimental* *only*
+   *
+   *   If no auto-hinter script module can be assigned to a glyph, a
+   *   fallback script gets assigned to it (see also the
+   *   @glyph-to-script-map property).  By default, this is
+   *   @FT_AUTOHINTER_SCRIPT_CJK.  Using the `fallback-script' property,
+   *   this fallback value can be changed.
+   *
+   *   {
+   *     FT_Library  library;
+   *     FT_UInt     fallback_script = FT_AUTOHINTER_SCRIPT_NONE;
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *
+   *     FT_Property_Set( library, "autofitter",
+   *                               "fallback-script", &fallback_script );
+   *   }
+   *
+   * @note:
+   *   This property can be used with @FT_Property_Get also.
+   *
+   *   It's important to use the right timing for changing this value: The
+   *   creation of the glyph-to-script map that eventually uses the
+   *   fallback script value gets triggered either by setting or reading a
+   *   face-specific property like @glyph-to-script-map, or by auto-hinting
+   *   any glyph from that face.  In particular, if you have already created
+   *   an @FT_Face structure but not loaded any glyph (using the
+   *   auto-hinter), a change of the fallback script will affect this face.
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   default-script
+   *
+   * @description:
+   *   *Experimental* *only*
+   *
+   *   If FreeType gets compiled with FT_CONFIG_OPTION_USE_HARFBUZZ to make
+   *   the HarfBuzz library access OpenType features for getting better
+   *   glyph coverages, this property sets the (auto-fitter) script to be
+   *   used for the default (OpenType) script data of a font's GSUB table.
+   *   Features for the default script are intended for all scripts not
+   *   explicitly handled in GSUB; an example is a `dlig' feature,
+   *   containing the combination of the characters `T', `E', and `L' to
+   *   form a `TEL' ligature.
+   *
+   *   By default, this is @FT_AUTOHINTER_SCRIPT_LATIN.  Using the
+   *   `default-script' property, this default value can be changed.
+   *
+   *   {
+   *     FT_Library  library;
+   *     FT_UInt     default_script = FT_AUTOHINTER_SCRIPT_NONE;
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *
+   *     FT_Property_Set( library, "autofitter",
+   *                               "default-script", &default_script );
+   *   }
+   *
+   * @note:
+   *   This property can be used with @FT_Property_Get also.
+   *
+   *   It's important to use the right timing for changing this value: The
+   *   creation of the glyph-to-script map that eventually uses the
+   *   default script value gets triggered either by setting or reading a
+   *   face-specific property like @glyph-to-script-map, or by auto-hinting
+   *   any glyph from that face.  In particular, if you have already created
+   *   an @FT_Face structure but not loaded any glyph (using the
+   *   auto-hinter), a change of the default script will affect this face.
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   increase-x-height
+   *
+   * @description:
+   *   For ppem values in the range 6~<= ppem <= `increase-x-height', round
+   *   up the font's x~height much more often than normally.  If the value
+   *   is set to~0, which is the default, this feature is switched off.  Use
+   *   this property to improve the legibility of small font sizes if
+   *   necessary.
+   *
+   *   {
+   *     FT_Library               library;
+   *     FT_Face                  face;
+   *     FT_Prop_IncreaseXHeight  prop;
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *     FT_New_Face( library, "foo.ttf", 0, &face );
+   *     FT_Set_Char_Size( face, 10 * 64, 0, 72, 0 );
+   *
+   *     prop.face  = face;
+   *     prop.limit = 14;
+   *
+   *     FT_Property_Set( library, "autofitter",
+   *                               "increase-x-height", &prop );
+   *   }
+   *
+   * @note:
+   *   This property can be used with @FT_Property_Get also.
+   *
+   *   Set this value right after calling @FT_Set_Char_Size, but before
+   *   loading any glyph (using the auto-hinter).
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @struct:
+   *   FT_Prop_IncreaseXHeight
+   *
+   * @description:
+   *   The data exchange structure for the @increase-x-height property.
+   *
+   */
+  typedef struct  FT_Prop_IncreaseXHeight_
+  {
+    FT_Face  face;
+    FT_UInt  limit;
+
+  } FT_Prop_IncreaseXHeight;
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   warping
+   *
+   * @description:
+   *   *Experimental* *only*
+   *
+   *   If FreeType gets compiled with option AF_CONFIG_OPTION_USE_WARPER to
+   *   activate the warp hinting code in the auto-hinter, this property
+   *   switches warping on and off.
+   *
+   *   Warping only works in `light' auto-hinting mode.  The idea of the
+   *   code is to slightly scale and shift a glyph along the non-hinted
+   *   dimension (which is usually the horizontal axis) so that as much of
+   *   its segments are aligned (more or less) to the grid.  To find out a
+   *   glyph's optimal scaling and shifting value, various parameter
+   *   combinations are tried and scored.
+   *
+   *   By default, warping is off.  The example below shows how to switch on
+   *   warping (omitting the error handling).
+   *
+   *   {
+   *     FT_Library  library;
+   *     FT_Bool     warping = 1;
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *
+   *     FT_Property_Set( library, "autofitter",
+   *                               "warping", &warping );
+   *   }
+   *
+   * @note:
+   *   This property can be used with @FT_Property_Get also.
+   *
+   *   The warping code can also change advance widths.  Have a look at the
+   *   `lsb_delta' and `rsb_delta' fields in the @FT_GlyphSlotRec structure
+   *   for details on improving inter-glyph distances while rendering.
+   *
+   *   Since warping is a global property of the auto-hinter it is best to
+   *   change its value before rendering any face.  Otherwise, you should
+   *   reload all faces that get auto-hinted in `light' hinting mode.
+   *
+   */
+
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTAUTOH_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftbbox.h b/darwin-x86_64/freetype/include/freetype2/ftbbox.h
new file mode 100644
index 0000000..9d9d040
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftbbox.h
@@ -0,0 +1,101 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftbbox.h                                                               */
+/*                                                                         */
+/*    FreeType exact bbox computation (specification).                     */
+/*                                                                         */
+/*  Copyright 1996-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* This component has a _single_ role: to compute exact outline bounding */
+  /* boxes.                                                                */
+  /*                                                                       */
+  /* It is separated from the rest of the engine for various technical     */
+  /* reasons.  It may well be integrated in `ftoutln' later.               */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+#ifndef __FTBBOX_H__
+#define __FTBBOX_H__
+
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    outline_processing                                                 */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Get_BBox                                                */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Compute the exact bounding box of an outline.  This is slower      */
+  /*    than computing the control box.  However, it uses an advanced      */
+  /*    algorithm that returns _very_ quickly when the two boxes           */
+  /*    coincide.  Otherwise, the outline Bézier arcs are traversed to     */
+  /*    extract their extrema.                                             */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    outline :: A pointer to the source outline.                        */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    abbox   :: The outline's exact bounding box.                       */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    If the font is tricky and the glyph has been loaded with           */
+  /*    @FT_LOAD_NO_SCALE, the resulting BBox is meaningless.  To get      */
+  /*    reasonable values for the BBox it is necessary to load the glyph   */
+  /*    at a large ppem value (so that the hinting instructions can        */
+  /*    properly shift and scale the subglyphs), then extracting the BBox, */
+  /*    which can be eventually converted back to font units.              */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Outline_Get_BBox( FT_Outline*  outline,
+                       FT_BBox     *abbox );
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTBBOX_H__ */
+
+
+/* END */
+
+
+/* Local Variables: */
+/* coding: utf-8    */
+/* End:             */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftbdf.h b/darwin-x86_64/freetype/include/freetype2/ftbdf.h
new file mode 100644
index 0000000..0bdabf4
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftbdf.h
@@ -0,0 +1,210 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftbdf.h                                                                */
+/*                                                                         */
+/*    FreeType API for accessing BDF-specific strings (specification).     */
+/*                                                                         */
+/*  Copyright 2002-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTBDF_H__
+#define __FTBDF_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    bdf_fonts                                                          */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    BDF and PCF Files                                                  */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    BDF and PCF specific API.                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section contains the declaration of functions specific to BDF */
+  /*    and PCF fonts.                                                     */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /**********************************************************************
+   *
+   * @enum:
+   *    BDF_PropertyType
+   *
+   * @description:
+   *    A list of BDF property types.
+   *
+   * @values:
+   *    BDF_PROPERTY_TYPE_NONE ::
+   *      Value~0 is used to indicate a missing property.
+   *
+   *    BDF_PROPERTY_TYPE_ATOM ::
+   *      Property is a string atom.
+   *
+   *    BDF_PROPERTY_TYPE_INTEGER ::
+   *      Property is a 32-bit signed integer.
+   *
+   *    BDF_PROPERTY_TYPE_CARDINAL ::
+   *      Property is a 32-bit unsigned integer.
+   */
+  typedef enum  BDF_PropertyType_
+  {
+    BDF_PROPERTY_TYPE_NONE     = 0,
+    BDF_PROPERTY_TYPE_ATOM     = 1,
+    BDF_PROPERTY_TYPE_INTEGER  = 2,
+    BDF_PROPERTY_TYPE_CARDINAL = 3
+
+  } BDF_PropertyType;
+
+
+  /**********************************************************************
+   *
+   * @type:
+   *    BDF_Property
+   *
+   * @description:
+   *    A handle to a @BDF_PropertyRec structure to model a given
+   *    BDF/PCF property.
+   */
+  typedef struct BDF_PropertyRec_*  BDF_Property;
+
+
+ /**********************************************************************
+  *
+  * @struct:
+  *    BDF_PropertyRec
+  *
+  * @description:
+  *    This structure models a given BDF/PCF property.
+  *
+  * @fields:
+  *    type ::
+  *      The property type.
+  *
+  *    u.atom ::
+  *      The atom string, if type is @BDF_PROPERTY_TYPE_ATOM.  May be
+  *      NULL, indicating an empty string.
+  *
+  *    u.integer ::
+  *      A signed integer, if type is @BDF_PROPERTY_TYPE_INTEGER.
+  *
+  *    u.cardinal ::
+  *      An unsigned integer, if type is @BDF_PROPERTY_TYPE_CARDINAL.
+  */
+  typedef struct  BDF_PropertyRec_
+  {
+    BDF_PropertyType  type;
+    union {
+      const char*     atom;
+      FT_Int32        integer;
+      FT_UInt32       cardinal;
+
+    } u;
+
+  } BDF_PropertyRec;
+
+
+ /**********************************************************************
+  *
+  * @function:
+  *    FT_Get_BDF_Charset_ID
+  *
+  * @description:
+  *    Retrieve a BDF font character set identity, according to
+  *    the BDF specification.
+  *
+  * @input:
+  *    face ::
+  *       A handle to the input face.
+  *
+  * @output:
+  *    acharset_encoding ::
+  *       Charset encoding, as a C~string, owned by the face.
+  *
+  *    acharset_registry ::
+  *       Charset registry, as a C~string, owned by the face.
+  *
+  * @return:
+  *   FreeType error code.  0~means success.
+  *
+  * @note:
+  *   This function only works with BDF faces, returning an error otherwise.
+  */
+  FT_EXPORT( FT_Error )
+  FT_Get_BDF_Charset_ID( FT_Face       face,
+                         const char*  *acharset_encoding,
+                         const char*  *acharset_registry );
+
+
+ /**********************************************************************
+  *
+  * @function:
+  *    FT_Get_BDF_Property
+  *
+  * @description:
+  *    Retrieve a BDF property from a BDF or PCF font file.
+  *
+  * @input:
+  *    face :: A handle to the input face.
+  *
+  *    name :: The property name.
+  *
+  * @output:
+  *    aproperty :: The property.
+  *
+  * @return:
+  *   FreeType error code.  0~means success.
+  *
+  * @note:
+  *   This function works with BDF _and_ PCF fonts.  It returns an error
+  *   otherwise.  It also returns an error if the property is not in the
+  *   font.
+  *
+  *   A `property' is a either key-value pair within the STARTPROPERTIES
+  *   ... ENDPROPERTIES block of a BDF font or a key-value pair from the
+  *   `info->props' array within a `FontRec' structure of a PCF font.
+  *
+  *   Integer properties are always stored as `signed' within PCF fonts;
+  *   consequently, @BDF_PROPERTY_TYPE_CARDINAL is a possible return value
+  *   for BDF fonts only.
+  *
+  *   In case of error, `aproperty->type' is always set to
+  *   @BDF_PROPERTY_TYPE_NONE.
+  */
+  FT_EXPORT( FT_Error )
+  FT_Get_BDF_Property( FT_Face           face,
+                       const char*       prop_name,
+                       BDF_PropertyRec  *aproperty );
+
+  /* */
+
+FT_END_HEADER
+
+#endif /* __FTBDF_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftbitmap.h b/darwin-x86_64/freetype/include/freetype2/ftbitmap.h
new file mode 100644
index 0000000..46cc47b
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftbitmap.h
@@ -0,0 +1,240 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftbitmap.h                                                             */
+/*                                                                         */
+/*    FreeType utility functions for bitmaps (specification).              */
+/*                                                                         */
+/*  Copyright 2004-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTBITMAP_H__
+#define __FTBITMAP_H__
+
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    bitmap_handling                                                    */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    Bitmap Handling                                                    */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    Handling FT_Bitmap objects.                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section contains functions for handling @FT_Bitmap objects.   */
+  /*    Note that none of the functions changes the bitmap's `flow' (as    */
+  /*    indicated by the sign of the `pitch' field in `FT_Bitmap').        */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Bitmap_Init                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Initialize a pointer to an @FT_Bitmap structure.                   */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    abitmap :: A pointer to the bitmap structure.                      */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    A deprecated name for the same function is `FT_Bitmap_New'.        */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Bitmap_Init( FT_Bitmap  *abitmap );
+
+
+  /* deprecated */
+  FT_EXPORT( void )
+  FT_Bitmap_New( FT_Bitmap  *abitmap );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Bitmap_Copy                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Copy a bitmap into another one.                                    */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library :: A handle to a library object.                           */
+  /*                                                                       */
+  /*    source  :: A handle to the source bitmap.                          */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    target  :: A handle to the target bitmap.                          */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Bitmap_Copy( FT_Library        library,
+                  const FT_Bitmap  *source,
+                  FT_Bitmap        *target);
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Bitmap_Embolden                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Embolden a bitmap.  The new bitmap will be about `xStrength'       */
+  /*    pixels wider and `yStrength' pixels higher.  The left and bottom   */
+  /*    borders are kept unchanged.                                        */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library   :: A handle to a library object.                         */
+  /*                                                                       */
+  /*    xStrength :: How strong the glyph is emboldened horizontally.      */
+  /*                 Expressed in 26.6 pixel format.                       */
+  /*                                                                       */
+  /*    yStrength :: How strong the glyph is emboldened vertically.        */
+  /*                 Expressed in 26.6 pixel format.                       */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    bitmap    :: A handle to the target bitmap.                        */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The current implementation restricts `xStrength' to be less than   */
+  /*    or equal to~8 if bitmap is of pixel_mode @FT_PIXEL_MODE_MONO.      */
+  /*                                                                       */
+  /*    If you want to embolden the bitmap owned by a @FT_GlyphSlotRec,    */
+  /*    you should call @FT_GlyphSlot_Own_Bitmap on the slot first.        */
+  /*                                                                       */
+  /*    Bitmaps in @FT_PIXEL_MODE_GRAY2 and @FT_PIXEL_MODE_GRAY@ format    */
+  /*    are converted to @FT_PIXEL_MODE_GRAY format (i.e., 8bpp).          */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Bitmap_Embolden( FT_Library  library,
+                      FT_Bitmap*  bitmap,
+                      FT_Pos      xStrength,
+                      FT_Pos      yStrength );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Bitmap_Convert                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Convert a bitmap object with depth 1bpp, 2bpp, 4bpp, 8bpp or 32bpp */
+  /*    to a bitmap object with depth 8bpp, making the number of used      */
+  /*    bytes line (a.k.a. the `pitch') a multiple of `alignment'.         */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library   :: A handle to a library object.                         */
+  /*                                                                       */
+  /*    source    :: The source bitmap.                                    */
+  /*                                                                       */
+  /*    alignment :: The pitch of the bitmap is a multiple of this         */
+  /*                 parameter.  Common values are 1, 2, or 4.             */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    target    :: The target bitmap.                                    */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    It is possible to call @FT_Bitmap_Convert multiple times without   */
+  /*    calling @FT_Bitmap_Done (the memory is simply reallocated).        */
+  /*                                                                       */
+  /*    Use @FT_Bitmap_Done to finally remove the bitmap object.           */
+  /*                                                                       */
+  /*    The `library' argument is taken to have access to FreeType's       */
+  /*    memory handling functions.                                         */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Bitmap_Convert( FT_Library        library,
+                     const FT_Bitmap  *source,
+                     FT_Bitmap        *target,
+                     FT_Int            alignment );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_GlyphSlot_Own_Bitmap                                            */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Make sure that a glyph slot owns `slot->bitmap'.                   */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    slot :: The glyph slot.                                            */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function is to be used in combination with                    */
+  /*    @FT_Bitmap_Embolden.                                               */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_GlyphSlot_Own_Bitmap( FT_GlyphSlot  slot );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Bitmap_Done                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Destroy a bitmap object initialized with @FT_Bitmap_Init.          */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library :: A handle to a library object.                           */
+  /*                                                                       */
+  /*    bitmap  :: The bitmap object to be freed.                          */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The `library' argument is taken to have access to FreeType's       */
+  /*    memory handling functions.                                         */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Bitmap_Done( FT_Library  library,
+                  FT_Bitmap  *bitmap );
+
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTBITMAP_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftbzip2.h b/darwin-x86_64/freetype/include/freetype2/ftbzip2.h
new file mode 100644
index 0000000..c25f946
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftbzip2.h
@@ -0,0 +1,102 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftbzip2.h                                                              */
+/*                                                                         */
+/*    Bzip2-compressed stream support.                                     */
+/*                                                                         */
+/*  Copyright 2010-2015 by                                                 */
+/*  Joel Klinghed.                                                         */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTBZIP2_H__
+#define __FTBZIP2_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    bzip2                                                              */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    BZIP2 Streams                                                      */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    Using bzip2-compressed font files.                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section contains the declaration of Bzip2-specific functions. */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+ /************************************************************************
+  *
+  * @function:
+  *   FT_Stream_OpenBzip2
+  *
+  * @description:
+  *   Open a new stream to parse bzip2-compressed font files.  This is
+  *   mainly used to support the compressed `*.pcf.bz2' fonts that come
+  *   with XFree86.
+  *
+  * @input:
+  *   stream ::
+  *     The target embedding stream.
+  *
+  *   source ::
+  *     The source stream.
+  *
+  * @return:
+  *   FreeType error code.  0~means success.
+  *
+  * @note:
+  *   The source stream must be opened _before_ calling this function.
+  *
+  *   Calling the internal function `FT_Stream_Close' on the new stream will
+  *   *not* call `FT_Stream_Close' on the source stream.  None of the stream
+  *   objects will be released to the heap.
+  *
+  *   The stream implementation is very basic and resets the decompression
+  *   process each time seeking backwards is needed within the stream.
+  *
+  *   In certain builds of the library, bzip2 compression recognition is
+  *   automatically handled when calling @FT_New_Face or @FT_Open_Face.
+  *   This means that if no font driver is capable of handling the raw
+  *   compressed file, the library will try to open a bzip2 compressed stream
+  *   from it and re-open the face with it.
+  *
+  *   This function may return `FT_Err_Unimplemented_Feature' if your build
+  *   of FreeType was not compiled with bzip2 support.
+  */
+  FT_EXPORT( FT_Error )
+  FT_Stream_OpenBzip2( FT_Stream  stream,
+                       FT_Stream  source );
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTBZIP2_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftcache.h b/darwin-x86_64/freetype/include/freetype2/ftcache.h
new file mode 100644
index 0000000..68525bb
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftcache.h
@@ -0,0 +1,1057 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftcache.h                                                              */
+/*                                                                         */
+/*    FreeType Cache subsystem (specification).                            */
+/*                                                                         */
+/*  Copyright 1996-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTCACHE_H__
+#define __FTCACHE_H__
+
+
+#include <ft2build.h>
+#include FT_GLYPH_H
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************
+   *
+   * <Section>
+   *    cache_subsystem
+   *
+   * <Title>
+   *    Cache Sub-System
+   *
+   * <Abstract>
+   *    How to cache face, size, and glyph data with FreeType~2.
+   *
+   * <Description>
+   *   This section describes the FreeType~2 cache sub-system, which is used
+   *   to limit the number of concurrently opened @FT_Face and @FT_Size
+   *   objects, as well as caching information like character maps and glyph
+   *   images while limiting their maximum memory usage.
+   *
+   *   Note that all types and functions begin with the `FTC_' prefix.
+   *
+   *   The cache is highly portable and thus doesn't know anything about the
+   *   fonts installed on your system, or how to access them.  This implies
+   *   the following scheme:
+   *
+   *   First, available or installed font faces are uniquely identified by
+   *   @FTC_FaceID values, provided to the cache by the client.  Note that
+   *   the cache only stores and compares these values, and doesn't try to
+   *   interpret them in any way.
+   *
+   *   Second, the cache calls, only when needed, a client-provided function
+   *   to convert an @FTC_FaceID into a new @FT_Face object.  The latter is
+   *   then completely managed by the cache, including its termination
+   *   through @FT_Done_Face.  To monitor termination of face objects, the
+   *   finalizer callback in the `generic' field of the @FT_Face object can
+   *   be used, which might also be used to store the @FTC_FaceID of the
+   *   face.
+   *
+   *   Clients are free to map face IDs to anything else.  The most simple
+   *   usage is to associate them to a (pathname,face_index) pair that is
+   *   used to call @FT_New_Face.  However, more complex schemes are also
+   *   possible.
+   *
+   *   Note that for the cache to work correctly, the face ID values must be
+   *   *persistent*, which means that the contents they point to should not
+   *   change at runtime, or that their value should not become invalid.
+   *
+   *   If this is unavoidable (e.g., when a font is uninstalled at runtime),
+   *   you should call @FTC_Manager_RemoveFaceID as soon as possible, to let
+   *   the cache get rid of any references to the old @FTC_FaceID it may
+   *   keep internally.  Failure to do so will lead to incorrect behaviour
+   *   or even crashes.
+   *
+   *   To use the cache, start with calling @FTC_Manager_New to create a new
+   *   @FTC_Manager object, which models a single cache instance.  You can
+   *   then look up @FT_Face and @FT_Size objects with
+   *   @FTC_Manager_LookupFace and @FTC_Manager_LookupSize, respectively.
+   *
+   *   If you want to use the charmap caching, call @FTC_CMapCache_New, then
+   *   later use @FTC_CMapCache_Lookup to perform the equivalent of
+   *   @FT_Get_Char_Index, only much faster.
+   *
+   *   If you want to use the @FT_Glyph caching, call @FTC_ImageCache, then
+   *   later use @FTC_ImageCache_Lookup to retrieve the corresponding
+   *   @FT_Glyph objects from the cache.
+   *
+   *   If you need lots of small bitmaps, it is much more memory efficient
+   *   to call @FTC_SBitCache_New followed by @FTC_SBitCache_Lookup.  This
+   *   returns @FTC_SBitRec structures, which are used to store small
+   *   bitmaps directly.  (A small bitmap is one whose metrics and
+   *   dimensions all fit into 8-bit integers).
+   *
+   *   We hope to also provide a kerning cache in the near future.
+   *
+   *
+   * <Order>
+   *   FTC_Manager
+   *   FTC_FaceID
+   *   FTC_Face_Requester
+   *
+   *   FTC_Manager_New
+   *   FTC_Manager_Reset
+   *   FTC_Manager_Done
+   *   FTC_Manager_LookupFace
+   *   FTC_Manager_LookupSize
+   *   FTC_Manager_RemoveFaceID
+   *
+   *   FTC_Node
+   *   FTC_Node_Unref
+   *
+   *   FTC_ImageCache
+   *   FTC_ImageCache_New
+   *   FTC_ImageCache_Lookup
+   *
+   *   FTC_SBit
+   *   FTC_SBitCache
+   *   FTC_SBitCache_New
+   *   FTC_SBitCache_Lookup
+   *
+   *   FTC_CMapCache
+   *   FTC_CMapCache_New
+   *   FTC_CMapCache_Lookup
+   *
+   *************************************************************************/
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*************************************************************************/
+  /*****                                                               *****/
+  /*****                    BASIC TYPE DEFINITIONS                     *****/
+  /*****                                                               *****/
+  /*************************************************************************/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************
+   *
+   * @type: FTC_FaceID
+   *
+   * @description:
+   *   An opaque pointer type that is used to identity face objects.  The
+   *   contents of such objects is application-dependent.
+   *
+   *   These pointers are typically used to point to a user-defined
+   *   structure containing a font file path, and face index.
+   *
+   * @note:
+   *   Never use NULL as a valid @FTC_FaceID.
+   *
+   *   Face IDs are passed by the client to the cache manager that calls,
+   *   when needed, the @FTC_Face_Requester to translate them into new
+   *   @FT_Face objects.
+   *
+   *   If the content of a given face ID changes at runtime, or if the value
+   *   becomes invalid (e.g., when uninstalling a font), you should
+   *   immediately call @FTC_Manager_RemoveFaceID before any other cache
+   *   function.
+   *
+   *   Failure to do so will result in incorrect behaviour or even
+   *   memory leaks and crashes.
+   */
+  typedef FT_Pointer  FTC_FaceID;
+
+
+  /************************************************************************
+   *
+   * @functype:
+   *   FTC_Face_Requester
+   *
+   * @description:
+   *   A callback function provided by client applications.  It is used by
+   *   the cache manager to translate a given @FTC_FaceID into a new valid
+   *   @FT_Face object, on demand.
+   *
+   * <Input>
+   *   face_id ::
+   *     The face ID to resolve.
+   *
+   *   library ::
+   *     A handle to a FreeType library object.
+   *
+   *   req_data ::
+   *     Application-provided request data (see note below).
+   *
+   * <Output>
+   *   aface ::
+   *     A new @FT_Face handle.
+   *
+   * <Return>
+   *   FreeType error code.  0~means success.
+   *
+   * <Note>
+   *   The third parameter `req_data' is the same as the one passed by the
+   *   client when @FTC_Manager_New is called.
+   *
+   *   The face requester should not perform funny things on the returned
+   *   face object, like creating a new @FT_Size for it, or setting a
+   *   transformation through @FT_Set_Transform!
+   */
+  typedef FT_Error
+  (*FTC_Face_Requester)( FTC_FaceID  face_id,
+                         FT_Library  library,
+                         FT_Pointer  req_data,
+                         FT_Face*    aface );
+
+  /* */
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*************************************************************************/
+  /*****                                                               *****/
+  /*****                      CACHE MANAGER OBJECT                     *****/
+  /*****                                                               *****/
+  /*************************************************************************/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FTC_Manager                                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This object corresponds to one instance of the cache-subsystem.    */
+  /*    It is used to cache one or more @FT_Face objects, along with       */
+  /*    corresponding @FT_Size objects.                                    */
+  /*                                                                       */
+  /*    The manager intentionally limits the total number of opened        */
+  /*    @FT_Face and @FT_Size objects to control memory usage.  See the    */
+  /*    `max_faces' and `max_sizes' parameters of @FTC_Manager_New.        */
+  /*                                                                       */
+  /*    The manager is also used to cache `nodes' of various types while   */
+  /*    limiting their total memory usage.                                 */
+  /*                                                                       */
+  /*    All limitations are enforced by keeping lists of managed objects   */
+  /*    in most-recently-used order, and flushing old nodes to make room   */
+  /*    for new ones.                                                      */
+  /*                                                                       */
+  typedef struct FTC_ManagerRec_*  FTC_Manager;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FTC_Node                                                           */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    An opaque handle to a cache node object.  Each cache node is       */
+  /*    reference-counted.  A node with a count of~0 might be flushed      */
+  /*    out of a full cache whenever a lookup request is performed.        */
+  /*                                                                       */
+  /*    If you look up nodes, you have the ability to `acquire' them,      */
+  /*    i.e., to increment their reference count.  This will prevent the   */
+  /*    node from being flushed out of the cache until you explicitly      */
+  /*    `release' it (see @FTC_Node_Unref).                                */
+  /*                                                                       */
+  /*    See also @FTC_SBitCache_Lookup and @FTC_ImageCache_Lookup.         */
+  /*                                                                       */
+  typedef struct FTC_NodeRec_*  FTC_Node;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_Manager_New                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Create a new cache manager.                                        */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library   :: The parent FreeType library handle to use.            */
+  /*                                                                       */
+  /*    max_faces :: Maximum number of opened @FT_Face objects managed by  */
+  /*                 this cache instance.  Use~0 for defaults.             */
+  /*                                                                       */
+  /*    max_sizes :: Maximum number of opened @FT_Size objects managed by  */
+  /*                 this cache instance.  Use~0 for defaults.             */
+  /*                                                                       */
+  /*    max_bytes :: Maximum number of bytes to use for cached data nodes. */
+  /*                 Use~0 for defaults.  Note that this value does not    */
+  /*                 account for managed @FT_Face and @FT_Size objects.    */
+  /*                                                                       */
+  /*    requester :: An application-provided callback used to translate    */
+  /*                 face IDs into real @FT_Face objects.                  */
+  /*                                                                       */
+  /*    req_data  :: A generic pointer that is passed to the requester     */
+  /*                 each time it is called (see @FTC_Face_Requester).     */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    amanager  :: A handle to a new manager object.  0~in case of       */
+  /*                 failure.                                              */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FTC_Manager_New( FT_Library          library,
+                   FT_UInt             max_faces,
+                   FT_UInt             max_sizes,
+                   FT_ULong            max_bytes,
+                   FTC_Face_Requester  requester,
+                   FT_Pointer          req_data,
+                   FTC_Manager        *amanager );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_Manager_Reset                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Empty a given cache manager.  This simply gets rid of all the      */
+  /*    currently cached @FT_Face and @FT_Size objects within the manager. */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    manager :: A handle to the manager.                                */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FTC_Manager_Reset( FTC_Manager  manager );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_Manager_Done                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Destroy a given manager after emptying it.                         */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    manager :: A handle to the target cache manager object.            */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FTC_Manager_Done( FTC_Manager  manager );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_Manager_LookupFace                                             */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Retrieve the @FT_Face object that corresponds to a given face ID   */
+  /*    through a cache manager.                                           */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    manager :: A handle to the cache manager.                          */
+  /*                                                                       */
+  /*    face_id :: The ID of the face object.                              */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    aface   :: A handle to the face object.                            */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The returned @FT_Face object is always owned by the manager.  You  */
+  /*    should never try to discard it yourself.                           */
+  /*                                                                       */
+  /*    The @FT_Face object doesn't necessarily have a current size object */
+  /*    (i.e., face->size can be~0).  If you need a specific `font size',  */
+  /*    use @FTC_Manager_LookupSize instead.                               */
+  /*                                                                       */
+  /*    Never change the face's transformation matrix (i.e., never call    */
+  /*    the @FT_Set_Transform function) on a returned face!  If you need   */
+  /*    to transform glyphs, do it yourself after glyph loading.           */
+  /*                                                                       */
+  /*    When you perform a lookup, out-of-memory errors are detected       */
+  /*    _within_ the lookup and force incremental flushes of the cache     */
+  /*    until enough memory is released for the lookup to succeed.         */
+  /*                                                                       */
+  /*    If a lookup fails with `FT_Err_Out_Of_Memory' the cache has        */
+  /*    already been completely flushed, and still no memory was available */
+  /*    for the operation.                                                 */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FTC_Manager_LookupFace( FTC_Manager  manager,
+                          FTC_FaceID   face_id,
+                          FT_Face     *aface );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FTC_ScalerRec                                                      */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A structure used to describe a given character size in either      */
+  /*    pixels or points to the cache manager.  See                        */
+  /*    @FTC_Manager_LookupSize.                                           */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    face_id :: The source face ID.                                     */
+  /*                                                                       */
+  /*    width   :: The character width.                                    */
+  /*                                                                       */
+  /*    height  :: The character height.                                   */
+  /*                                                                       */
+  /*    pixel   :: A Boolean.  If 1, the `width' and `height' fields are   */
+  /*               interpreted as integer pixel character sizes.           */
+  /*               Otherwise, they are expressed as 1/64th of points.      */
+  /*                                                                       */
+  /*    x_res   :: Only used when `pixel' is value~0 to indicate the       */
+  /*               horizontal resolution in dpi.                           */
+  /*                                                                       */
+  /*    y_res   :: Only used when `pixel' is value~0 to indicate the       */
+  /*               vertical resolution in dpi.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This type is mainly used to retrieve @FT_Size objects through the  */
+  /*    cache manager.                                                     */
+  /*                                                                       */
+  typedef struct  FTC_ScalerRec_
+  {
+    FTC_FaceID  face_id;
+    FT_UInt     width;
+    FT_UInt     height;
+    FT_Int      pixel;
+    FT_UInt     x_res;
+    FT_UInt     y_res;
+
+  } FTC_ScalerRec;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FTC_Scaler                                                         */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to an @FTC_ScalerRec structure.                           */
+  /*                                                                       */
+  typedef struct FTC_ScalerRec_*  FTC_Scaler;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_Manager_LookupSize                                             */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Retrieve the @FT_Size object that corresponds to a given           */
+  /*    @FTC_ScalerRec pointer through a cache manager.                    */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    manager :: A handle to the cache manager.                          */
+  /*                                                                       */
+  /*    scaler  :: A scaler handle.                                        */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    asize   :: A handle to the size object.                            */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The returned @FT_Size object is always owned by the manager.  You  */
+  /*    should never try to discard it by yourself.                        */
+  /*                                                                       */
+  /*    You can access the parent @FT_Face object simply as `size->face'   */
+  /*    if you need it.  Note that this object is also owned by the        */
+  /*    manager.                                                           */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    When you perform a lookup, out-of-memory errors are detected       */
+  /*    _within_ the lookup and force incremental flushes of the cache     */
+  /*    until enough memory is released for the lookup to succeed.         */
+  /*                                                                       */
+  /*    If a lookup fails with `FT_Err_Out_Of_Memory' the cache has        */
+  /*    already been completely flushed, and still no memory is available  */
+  /*    for the operation.                                                 */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FTC_Manager_LookupSize( FTC_Manager  manager,
+                          FTC_Scaler   scaler,
+                          FT_Size     *asize );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_Node_Unref                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Decrement a cache node's internal reference count.  When the count */
+  /*    reaches 0, it is not destroyed but becomes eligible for subsequent */
+  /*    cache flushes.                                                     */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    node    :: The cache node handle.                                  */
+  /*                                                                       */
+  /*    manager :: The cache manager handle.                               */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FTC_Node_Unref( FTC_Node     node,
+                  FTC_Manager  manager );
+
+
+  /*************************************************************************
+   *
+   * @function:
+   *   FTC_Manager_RemoveFaceID
+   *
+   * @description:
+   *   A special function used to indicate to the cache manager that
+   *   a given @FTC_FaceID is no longer valid, either because its
+   *   content changed, or because it was deallocated or uninstalled.
+   *
+   * @input:
+   *   manager ::
+   *     The cache manager handle.
+   *
+   *   face_id ::
+   *     The @FTC_FaceID to be removed.
+   *
+   * @note:
+   *   This function flushes all nodes from the cache corresponding to this
+   *   `face_id', with the exception of nodes with a non-null reference
+   *   count.
+   *
+   *   Such nodes are however modified internally so as to never appear
+   *   in later lookups with the same `face_id' value, and to be immediately
+   *   destroyed when released by all their users.
+   *
+   */
+  FT_EXPORT( void )
+  FTC_Manager_RemoveFaceID( FTC_Manager  manager,
+                            FTC_FaceID   face_id );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    cache_subsystem                                                    */
+  /*                                                                       */
+  /*************************************************************************/
+
+  /*************************************************************************
+   *
+   * @type:
+   *   FTC_CMapCache
+   *
+   * @description:
+   *   An opaque handle used to model a charmap cache.  This cache is to
+   *   hold character codes -> glyph indices mappings.
+   *
+   */
+  typedef struct FTC_CMapCacheRec_*  FTC_CMapCache;
+
+
+  /*************************************************************************
+   *
+   * @function:
+   *   FTC_CMapCache_New
+   *
+   * @description:
+   *   Create a new charmap cache.
+   *
+   * @input:
+   *   manager ::
+   *     A handle to the cache manager.
+   *
+   * @output:
+   *   acache ::
+   *     A new cache handle.  NULL in case of error.
+   *
+   * @return:
+   *   FreeType error code.  0~means success.
+   *
+   * @note:
+   *   Like all other caches, this one will be destroyed with the cache
+   *   manager.
+   *
+   */
+  FT_EXPORT( FT_Error )
+  FTC_CMapCache_New( FTC_Manager     manager,
+                     FTC_CMapCache  *acache );
+
+
+  /************************************************************************
+   *
+   * @function:
+   *   FTC_CMapCache_Lookup
+   *
+   * @description:
+   *   Translate a character code into a glyph index, using the charmap
+   *   cache.
+   *
+   * @input:
+   *   cache ::
+   *     A charmap cache handle.
+   *
+   *   face_id ::
+   *     The source face ID.
+   *
+   *   cmap_index ::
+   *     The index of the charmap in the source face.  Any negative value
+   *     means to use the cache @FT_Face's default charmap.
+   *
+   *   char_code ::
+   *     The character code (in the corresponding charmap).
+   *
+   * @return:
+   *    Glyph index.  0~means `no glyph'.
+   *
+   */
+  FT_EXPORT( FT_UInt )
+  FTC_CMapCache_Lookup( FTC_CMapCache  cache,
+                        FTC_FaceID     face_id,
+                        FT_Int         cmap_index,
+                        FT_UInt32      char_code );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    cache_subsystem                                                    */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*************************************************************************/
+  /*****                                                               *****/
+  /*****                       IMAGE CACHE OBJECT                      *****/
+  /*****                                                               *****/
+  /*************************************************************************/
+  /*************************************************************************/
+  /*************************************************************************/
+
+
+  /*************************************************************************
+   *
+   * @struct:
+   *   FTC_ImageTypeRec
+   *
+   * @description:
+   *   A structure used to model the type of images in a glyph cache.
+   *
+   * @fields:
+   *   face_id ::
+   *     The face ID.
+   *
+   *   width ::
+   *     The width in pixels.
+   *
+   *   height ::
+   *     The height in pixels.
+   *
+   *   flags ::
+   *     The load flags, as in @FT_Load_Glyph.
+   *
+   */
+  typedef struct  FTC_ImageTypeRec_
+  {
+    FTC_FaceID  face_id;
+    FT_UInt     width;
+    FT_UInt     height;
+    FT_Int32    flags;
+
+  } FTC_ImageTypeRec;
+
+
+  /*************************************************************************
+   *
+   * @type:
+   *   FTC_ImageType
+   *
+   * @description:
+   *   A handle to an @FTC_ImageTypeRec structure.
+   *
+   */
+  typedef struct FTC_ImageTypeRec_*  FTC_ImageType;
+
+
+  /* */
+
+
+#define FTC_IMAGE_TYPE_COMPARE( d1, d2 )      \
+          ( (d1)->face_id == (d2)->face_id && \
+            (d1)->width   == (d2)->width   && \
+            (d1)->flags   == (d2)->flags   )
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FTC_ImageCache                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a glyph image cache object.  They are designed to      */
+  /*    hold many distinct glyph images while not exceeding a certain      */
+  /*    memory threshold.                                                  */
+  /*                                                                       */
+  typedef struct FTC_ImageCacheRec_*  FTC_ImageCache;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_ImageCache_New                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Create a new glyph image cache.                                    */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    manager :: The parent manager for the image cache.                 */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    acache  :: A handle to the new glyph image cache object.           */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FTC_ImageCache_New( FTC_Manager      manager,
+                      FTC_ImageCache  *acache );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_ImageCache_Lookup                                              */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Retrieve a given glyph image from a glyph image cache.             */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    cache  :: A handle to the source glyph image cache.                */
+  /*                                                                       */
+  /*    type   :: A pointer to a glyph image type descriptor.              */
+  /*                                                                       */
+  /*    gindex :: The glyph index to retrieve.                             */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    aglyph :: The corresponding @FT_Glyph object.  0~in case of        */
+  /*              failure.                                                 */
+  /*                                                                       */
+  /*    anode  :: Used to return the address of of the corresponding cache */
+  /*              node after incrementing its reference count (see note    */
+  /*              below).                                                  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The returned glyph is owned and managed by the glyph image cache.  */
+  /*    Never try to transform or discard it manually!  You can however    */
+  /*    create a copy with @FT_Glyph_Copy and modify the new one.          */
+  /*                                                                       */
+  /*    If `anode' is _not_ NULL, it receives the address of the cache     */
+  /*    node containing the glyph image, after increasing its reference    */
+  /*    count.  This ensures that the node (as well as the @FT_Glyph) will */
+  /*    always be kept in the cache until you call @FTC_Node_Unref to      */
+  /*    `release' it.                                                      */
+  /*                                                                       */
+  /*    If `anode' is NULL, the cache node is left unchanged, which means  */
+  /*    that the @FT_Glyph could be flushed out of the cache on the next   */
+  /*    call to one of the caching sub-system APIs.  Don't assume that it  */
+  /*    is persistent!                                                     */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FTC_ImageCache_Lookup( FTC_ImageCache  cache,
+                         FTC_ImageType   type,
+                         FT_UInt         gindex,
+                         FT_Glyph       *aglyph,
+                         FTC_Node       *anode );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_ImageCache_LookupScaler                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A variant of @FTC_ImageCache_Lookup that uses an @FTC_ScalerRec    */
+  /*    to specify the face ID and its size.                               */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    cache      :: A handle to the source glyph image cache.            */
+  /*                                                                       */
+  /*    scaler     :: A pointer to a scaler descriptor.                    */
+  /*                                                                       */
+  /*    load_flags :: The corresponding load flags.                        */
+  /*                                                                       */
+  /*    gindex     :: The glyph index to retrieve.                         */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    aglyph     :: The corresponding @FT_Glyph object.  0~in case of    */
+  /*                  failure.                                             */
+  /*                                                                       */
+  /*    anode      :: Used to return the address of of the corresponding   */
+  /*                  cache node after incrementing its reference count    */
+  /*                  (see note below).                                    */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The returned glyph is owned and managed by the glyph image cache.  */
+  /*    Never try to transform or discard it manually!  You can however    */
+  /*    create a copy with @FT_Glyph_Copy and modify the new one.          */
+  /*                                                                       */
+  /*    If `anode' is _not_ NULL, it receives the address of the cache     */
+  /*    node containing the glyph image, after increasing its reference    */
+  /*    count.  This ensures that the node (as well as the @FT_Glyph) will */
+  /*    always be kept in the cache until you call @FTC_Node_Unref to      */
+  /*    `release' it.                                                      */
+  /*                                                                       */
+  /*    If `anode' is NULL, the cache node is left unchanged, which means  */
+  /*    that the @FT_Glyph could be flushed out of the cache on the next   */
+  /*    call to one of the caching sub-system APIs.  Don't assume that it  */
+  /*    is persistent!                                                     */
+  /*                                                                       */
+  /*    Calls to @FT_Set_Char_Size and friends have no effect on cached    */
+  /*    glyphs; you should always use the FreeType cache API instead.      */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FTC_ImageCache_LookupScaler( FTC_ImageCache  cache,
+                               FTC_Scaler      scaler,
+                               FT_ULong        load_flags,
+                               FT_UInt         gindex,
+                               FT_Glyph       *aglyph,
+                               FTC_Node       *anode );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FTC_SBit                                                           */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a small bitmap descriptor.  See the @FTC_SBitRec       */
+  /*    structure for details.                                             */
+  /*                                                                       */
+  typedef struct FTC_SBitRec_*  FTC_SBit;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FTC_SBitRec                                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A very compact structure used to describe a small glyph bitmap.    */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    width     :: The bitmap width in pixels.                           */
+  /*                                                                       */
+  /*    height    :: The bitmap height in pixels.                          */
+  /*                                                                       */
+  /*    left      :: The horizontal distance from the pen position to the  */
+  /*                 left bitmap border (a.k.a. `left side bearing', or    */
+  /*                 `lsb').                                               */
+  /*                                                                       */
+  /*    top       :: The vertical distance from the pen position (on the   */
+  /*                 baseline) to the upper bitmap border (a.k.a. `top     */
+  /*                 side bearing').  The distance is positive for upwards */
+  /*                 y~coordinates.                                        */
+  /*                                                                       */
+  /*    format    :: The format of the glyph bitmap (monochrome or gray).  */
+  /*                                                                       */
+  /*    max_grays :: Maximum gray level value (in the range 1 to~255).     */
+  /*                                                                       */
+  /*    pitch     :: The number of bytes per bitmap line.  May be positive */
+  /*                 or negative.                                          */
+  /*                                                                       */
+  /*    xadvance  :: The horizontal advance width in pixels.               */
+  /*                                                                       */
+  /*    yadvance  :: The vertical advance height in pixels.                */
+  /*                                                                       */
+  /*    buffer    :: A pointer to the bitmap pixels.                       */
+  /*                                                                       */
+  typedef struct  FTC_SBitRec_
+  {
+    FT_Byte   width;
+    FT_Byte   height;
+    FT_Char   left;
+    FT_Char   top;
+
+    FT_Byte   format;
+    FT_Byte   max_grays;
+    FT_Short  pitch;
+    FT_Char   xadvance;
+    FT_Char   yadvance;
+
+    FT_Byte*  buffer;
+
+  } FTC_SBitRec;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FTC_SBitCache                                                      */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to a small bitmap cache.  These are special cache objects */
+  /*    used to store small glyph bitmaps (and anti-aliased pixmaps) in a  */
+  /*    much more efficient way than the traditional glyph image cache     */
+  /*    implemented by @FTC_ImageCache.                                    */
+  /*                                                                       */
+  typedef struct FTC_SBitCacheRec_*  FTC_SBitCache;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_SBitCache_New                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Create a new cache to store small glyph bitmaps.                   */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    manager :: A handle to the source cache manager.                   */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    acache  :: A handle to the new sbit cache.  NULL in case of error. */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FTC_SBitCache_New( FTC_Manager     manager,
+                     FTC_SBitCache  *acache );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_SBitCache_Lookup                                               */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Look up a given small glyph bitmap in a given sbit cache and       */
+  /*    `lock' it to prevent its flushing from the cache until needed.     */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    cache  :: A handle to the source sbit cache.                       */
+  /*                                                                       */
+  /*    type   :: A pointer to the glyph image type descriptor.            */
+  /*                                                                       */
+  /*    gindex :: The glyph index.                                         */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    sbit   :: A handle to a small bitmap descriptor.                   */
+  /*                                                                       */
+  /*    anode  :: Used to return the address of of the corresponding cache */
+  /*              node after incrementing its reference count (see note    */
+  /*              below).                                                  */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The small bitmap descriptor and its bit buffer are owned by the    */
+  /*    cache and should never be freed by the application.  They might    */
+  /*    as well disappear from memory on the next cache lookup, so don't   */
+  /*    treat them as persistent data.                                     */
+  /*                                                                       */
+  /*    The descriptor's `buffer' field is set to~0 to indicate a missing  */
+  /*    glyph bitmap.                                                      */
+  /*                                                                       */
+  /*    If `anode' is _not_ NULL, it receives the address of the cache     */
+  /*    node containing the bitmap, after increasing its reference count.  */
+  /*    This ensures that the node (as well as the image) will always be   */
+  /*    kept in the cache until you call @FTC_Node_Unref to `release' it.  */
+  /*                                                                       */
+  /*    If `anode' is NULL, the cache node is left unchanged, which means  */
+  /*    that the bitmap could be flushed out of the cache on the next      */
+  /*    call to one of the caching sub-system APIs.  Don't assume that it  */
+  /*    is persistent!                                                     */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FTC_SBitCache_Lookup( FTC_SBitCache    cache,
+                        FTC_ImageType    type,
+                        FT_UInt          gindex,
+                        FTC_SBit        *sbit,
+                        FTC_Node        *anode );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FTC_SBitCache_LookupScaler                                         */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A variant of @FTC_SBitCache_Lookup that uses an @FTC_ScalerRec     */
+  /*    to specify the face ID and its size.                               */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    cache      :: A handle to the source sbit cache.                   */
+  /*                                                                       */
+  /*    scaler     :: A pointer to the scaler descriptor.                  */
+  /*                                                                       */
+  /*    load_flags :: The corresponding load flags.                        */
+  /*                                                                       */
+  /*    gindex     :: The glyph index.                                     */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    sbit       :: A handle to a small bitmap descriptor.               */
+  /*                                                                       */
+  /*    anode      :: Used to return the address of of the corresponding   */
+  /*                  cache node after incrementing its reference count    */
+  /*                  (see note below).                                    */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The small bitmap descriptor and its bit buffer are owned by the    */
+  /*    cache and should never be freed by the application.  They might    */
+  /*    as well disappear from memory on the next cache lookup, so don't   */
+  /*    treat them as persistent data.                                     */
+  /*                                                                       */
+  /*    The descriptor's `buffer' field is set to~0 to indicate a missing  */
+  /*    glyph bitmap.                                                      */
+  /*                                                                       */
+  /*    If `anode' is _not_ NULL, it receives the address of the cache     */
+  /*    node containing the bitmap, after increasing its reference count.  */
+  /*    This ensures that the node (as well as the image) will always be   */
+  /*    kept in the cache until you call @FTC_Node_Unref to `release' it.  */
+  /*                                                                       */
+  /*    If `anode' is NULL, the cache node is left unchanged, which means  */
+  /*    that the bitmap could be flushed out of the cache on the next      */
+  /*    call to one of the caching sub-system APIs.  Don't assume that it  */
+  /*    is persistent!                                                     */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FTC_SBitCache_LookupScaler( FTC_SBitCache  cache,
+                              FTC_Scaler     scaler,
+                              FT_ULong       load_flags,
+                              FT_UInt        gindex,
+                              FTC_SBit      *sbit,
+                              FTC_Node      *anode );
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTCACHE_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftcffdrv.h b/darwin-x86_64/freetype/include/freetype2/ftcffdrv.h
new file mode 100644
index 0000000..6c8e416
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftcffdrv.h
@@ -0,0 +1,262 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftcffdrv.h                                                             */
+/*                                                                         */
+/*    FreeType API for controlling the CFF driver (specification only).    */
+/*                                                                         */
+/*  Copyright 2013-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTCFFDRV_H__
+#define __FTCFFDRV_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /**************************************************************************
+   *
+   * @section:
+   *   cff_driver
+   *
+   * @title:
+   *   The CFF driver
+   *
+   * @abstract:
+   *   Controlling the CFF driver module.
+   *
+   * @description:
+   *   While FreeType's CFF driver doesn't expose API functions by itself,
+   *   it is possible to control its behaviour with @FT_Property_Set and
+   *   @FT_Property_Get.  The list below gives the available properties
+   *   together with the necessary macros and structures.
+   *
+   *   The CFF driver's module name is `cff'.
+   *
+   *   *Hinting* *and* *antialiasing* *principles* *of* *the* *new* *engine*
+   *
+   *   The rasterizer is positioning horizontal features (e.g., ascender
+   *   height & x-height, or crossbars) on the pixel grid and minimizing the
+   *   amount of antialiasing applied to them, while placing vertical
+   *   features (vertical stems) on the pixel grid without hinting, thus
+   *   representing the stem position and weight accurately.  Sometimes the
+   *   vertical stems may be only partially black.  In this context,
+   *   `antialiasing' means that stems are not positioned exactly on pixel
+   *   borders, causing a fuzzy appearance.
+   *
+   *   There are two principles behind this approach.
+   *
+   *   1) No hinting in the horizontal direction: Unlike `superhinted'
+   *   TrueType, which changes glyph widths to accommodate regular
+   *   inter-glyph spacing, Adobe's approach is `faithful to the design' in
+   *   representing both the glyph width and the inter-glyph spacing
+   *   designed for the font.  This makes the screen display as close as it
+   *   can be to the result one would get with infinite resolution, while
+   *   preserving what is considered the key characteristics of each glyph.
+   *   Note that the distances between unhinted and grid-fitted positions at
+   *   small sizes are comparable to kerning values and thus would be
+   *   noticeable (and distracting) while reading if hinting were applied.
+   *
+   *   One of the reasons to not hint horizontally is antialiasing for LCD
+   *   screens: The pixel geometry of modern displays supplies three
+   *   vertical sub-pixels as the eye moves horizontally across each visible
+   *   pixel.  On devices where we can be certain this characteristic is
+   *   present a rasterizer can take advantage of the sub-pixels to add
+   *   increments of weight.  In Western writing systems this turns out to
+   *   be the more critical direction anyway; the weights and spacing of
+   *   vertical stems (see above) are central to Armenian, Cyrillic, Greek,
+   *   and Latin type designs.  Even when the rasterizer uses greyscale
+   *   antialiasing instead of color (a necessary compromise when one
+   *   doesn't know the screen characteristics), the unhinted vertical
+   *   features preserve the design's weight and spacing much better than
+   *   aliased type would.
+   *
+   *   2) Aligment in the vertical direction: Weights and spacing along the
+   *   y~axis are less critical; what is much more important is the visual
+   *   alignment of related features (like cap-height and x-height).  The
+   *   sense of alignment for these is enhanced by the sharpness of grid-fit
+   *   edges, while the cruder vertical resolution (full pixels instead of
+   *   1/3 pixels) is less of a problem.
+   *
+   *   On the technical side, horizontal alignment zones for ascender,
+   *   x-height, and other important height values (traditionally called
+   *   `blue zones') as defined in the font are positioned independently,
+   *   each being rounded to the nearest pixel edge, taking care of
+   *   overshoot suppression at small sizes, stem darkening, and scaling.
+   *
+   *   Hstems (this is, hint values defined in the font to help align
+   *   horizontal features) that fall within a blue zone are said to be
+   *   `captured' and are aligned to that zone.  Uncaptured stems are moved
+   *   in one of four ways, top edge up or down, bottom edge up or down.
+   *   Unless there are conflicting hstems, the smallest movement is taken
+   *   to minimize distortion.
+   *
+   * @order:
+   *   hinting-engine
+   *   no-stem-darkening
+   *   darkening-parameters
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   hinting-engine
+   *
+   * @description:
+   *   Thanks to Adobe, which contributed a new hinting (and parsing)
+   *   engine, an application can select between `freetype' and `adobe' if
+   *   compiled with CFF_CONFIG_OPTION_OLD_ENGINE.  If this configuration
+   *   macro isn't defined, `hinting-engine' does nothing.
+   *
+   *   The default engine is `freetype' if CFF_CONFIG_OPTION_OLD_ENGINE is
+   *   defined, and `adobe' otherwise.
+   *
+   *   The following example code demonstrates how to select Adobe's hinting
+   *   engine (omitting the error handling).
+   *
+   *   {
+   *     FT_Library  library;
+   *     FT_UInt     hinting_engine = FT_CFF_HINTING_ADOBE;
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *
+   *     FT_Property_Set( library, "cff",
+   *                               "hinting-engine", &hinting_engine );
+   *   }
+   *
+   * @note:
+   *   This property can be used with @FT_Property_Get also.
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @enum:
+   *   FT_CFF_HINTING_XXX
+   *
+   * @description:
+   *   A list of constants used for the @hinting-engine property to select
+   *   the hinting engine for CFF fonts.
+   *
+   * @values:
+   *   FT_CFF_HINTING_FREETYPE ::
+   *     Use the old FreeType hinting engine.
+   *
+   *   FT_CFF_HINTING_ADOBE ::
+   *     Use the hinting engine contributed by Adobe.
+   *
+   */
+#define FT_CFF_HINTING_FREETYPE  0
+#define FT_CFF_HINTING_ADOBE     1
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   no-stem-darkening
+   *
+   * @description:
+   *   By default, the Adobe CFF engine darkens stems at smaller sizes,
+   *   regardless of hinting, to enhance contrast.  This feature requires
+   *   a rendering system with proper gamma correction.  Setting this
+   *   property, stem darkening gets switched off.
+   *
+   *   Note that stem darkening is never applied if @FT_LOAD_NO_SCALE is set.
+   *
+   *   {
+   *     FT_Library  library;
+   *     FT_Bool     no_stem_darkening = TRUE;
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *
+   *     FT_Property_Set( library, "cff",
+   *                               "no-stem-darkening", &no_stem_darkening );
+   *   }
+   *
+   * @note:
+   *   This property can be used with @FT_Property_Get also.
+   *
+   */
+
+
+  /**************************************************************************
+   *
+   * @property:
+   *   darkening-parameters
+   *
+   * @description:
+   *   By default, the Adobe CFF engine darkens stems as follows (if the
+   *   `no-stem-darkening' property isn't set):
+   *
+   *   {
+   *     stem width <= 0.5px:   darkening amount = 0.4px
+   *     stem width  = 1px:     darkening amount = 0.275px
+   *     stem width  = 1.667px: darkening amount = 0.275px
+   *     stem width >= 2.333px: darkening amount = 0px
+   *   }
+   *
+   *   and piecewise linear in-between.  At configuration time, these four
+   *   control points can be set with the macro
+   *   `CFF_CONFIG_OPTION_DARKENING_PARAMETERS'.  At runtime, the control
+   *   points can be changed using the `darkening-parameters' property, as
+   *   the following example demonstrates.
+   *
+   *   {
+   *     FT_Library  library;
+   *     FT_Int      darken_params[8] = {  500, 300,   // x1, y1
+   *                                      1000, 200,   // x2, y2
+   *                                      1500, 100,   // x3, y3
+   *                                      2000,   0 }; // x4, y4
+   *
+   *
+   *     FT_Init_FreeType( &library );
+   *
+   *     FT_Property_Set( library, "cff",
+   *                               "darkening-parameters", darken_params );
+   *   }
+   *
+   *   The x~values give the stem width, and the y~values the darkening
+   *   amount.  The unit is 1000th of pixels.  All coordinate values must be
+   *   positive; the x~values must be monotonically increasing; the
+   *   y~values must be monotonically decreasing and smaller than or
+   *   equal to 500 (corresponding to half a pixel); the slope of each
+   *   linear piece must be shallower than -1 (e.g., -.4).
+   *
+   * @note:
+   *   This property can be used with @FT_Property_Get also.
+   *
+   */
+
+  /* */
+
+
+FT_END_HEADER
+
+
+#endif /* __FTCFFDRV_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftchapters.h b/darwin-x86_64/freetype/include/freetype2/ftchapters.h
new file mode 100644
index 0000000..d333761
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftchapters.h
@@ -0,0 +1,121 @@
+/***************************************************************************/
+/*                                                                         */
+/* This file defines the structure of the FreeType reference.              */
+/* It is used by the python script that generates the HTML files.          */
+/*                                                                         */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/*                                                                         */
+/* <Chapter>                                                               */
+/*    general_remarks                                                      */
+/*                                                                         */
+/* <Title>                                                                 */
+/*    General Remarks                                                      */
+/*                                                                         */
+/* <Sections>                                                              */
+/*    header_inclusion                                                     */
+/*    user_allocation                                                      */
+/*                                                                         */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/*                                                                         */
+/* <Chapter>                                                               */
+/*    core_api                                                             */
+/*                                                                         */
+/* <Title>                                                                 */
+/*    Core API                                                             */
+/*                                                                         */
+/* <Sections>                                                              */
+/*    version                                                              */
+/*    basic_types                                                          */
+/*    base_interface                                                       */
+/*    glyph_variants                                                       */
+/*    glyph_management                                                     */
+/*    mac_specific                                                         */
+/*    sizes_management                                                     */
+/*    header_file_macros                                                   */
+/*                                                                         */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/*                                                                         */
+/* <Chapter>                                                               */
+/*    format_specific                                                      */
+/*                                                                         */
+/* <Title>                                                                 */
+/*    Format-Specific API                                                  */
+/*                                                                         */
+/* <Sections>                                                              */
+/*    multiple_masters                                                     */
+/*    truetype_tables                                                      */
+/*    type1_tables                                                         */
+/*    sfnt_names                                                           */
+/*    bdf_fonts                                                            */
+/*    cid_fonts                                                            */
+/*    pfr_fonts                                                            */
+/*    winfnt_fonts                                                         */
+/*    font_formats                                                         */
+/*    gasp_table                                                           */
+/*                                                                         */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/*                                                                         */
+/* <Chapter>                                                               */
+/*    module_specific                                                      */
+/*                                                                         */
+/* <Title>                                                                 */
+/*    Controlling FreeType Modules                                         */
+/*                                                                         */
+/* <Sections>                                                              */
+/*    auto_hinter                                                          */
+/*    cff_driver                                                           */
+/*    tt_driver                                                            */
+/*                                                                         */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/*                                                                         */
+/* <Chapter>                                                               */
+/*    cache_subsystem                                                      */
+/*                                                                         */
+/* <Title>                                                                 */
+/*    Cache Sub-System                                                     */
+/*                                                                         */
+/* <Sections>                                                              */
+/*    cache_subsystem                                                      */
+/*                                                                         */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/*                                                                         */
+/* <Chapter>                                                               */
+/*    support_api                                                          */
+/*                                                                         */
+/* <Title>                                                                 */
+/*    Support API                                                          */
+/*                                                                         */
+/* <Sections>                                                              */
+/*    computations                                                         */
+/*    list_processing                                                      */
+/*    outline_processing                                                   */
+/*    quick_advance                                                        */
+/*    bitmap_handling                                                      */
+/*    raster                                                               */
+/*    glyph_stroker                                                        */
+/*    system_interface                                                     */
+/*    module_management                                                    */
+/*    gzip                                                                 */
+/*    lzw                                                                  */
+/*    bzip2                                                                */
+/*    lcd_filtering                                                        */
+/*                                                                         */
+/***************************************************************************/
diff --git a/darwin-x86_64/freetype/include/freetype2/ftcid.h b/darwin-x86_64/freetype/include/freetype2/ftcid.h
new file mode 100644
index 0000000..05741c8
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftcid.h
@@ -0,0 +1,168 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftcid.h                                                                */
+/*                                                                         */
+/*    FreeType API for accessing CID font information (specification).     */
+/*                                                                         */
+/*  Copyright 2007-2015 by                                                 */
+/*  Dereg Clegg and Michael Toftdal.                                       */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTCID_H__
+#define __FTCID_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    cid_fonts                                                          */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    CID Fonts                                                          */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    CID-keyed font specific API.                                       */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section contains the declaration of CID-keyed font specific   */
+  /*    functions.                                                         */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /**********************************************************************
+   *
+   * @function:
+   *    FT_Get_CID_Registry_Ordering_Supplement
+   *
+   * @description:
+   *    Retrieve the Registry/Ordering/Supplement triple (also known as the
+   *    "R/O/S") from a CID-keyed font.
+   *
+   * @input:
+   *    face ::
+   *       A handle to the input face.
+   *
+   * @output:
+   *    registry ::
+   *       The registry, as a C~string, owned by the face.
+   *
+   *    ordering ::
+   *       The ordering, as a C~string, owned by the face.
+   *
+   *    supplement ::
+   *       The supplement.
+   *
+   * @return:
+   *    FreeType error code.  0~means success.
+   *
+   * @note:
+   *    This function only works with CID faces, returning an error
+   *    otherwise.
+   *
+   * @since:
+   *    2.3.6
+   */
+  FT_EXPORT( FT_Error )
+  FT_Get_CID_Registry_Ordering_Supplement( FT_Face       face,
+                                           const char*  *registry,
+                                           const char*  *ordering,
+                                           FT_Int       *supplement);
+
+
+  /**********************************************************************
+   *
+   * @function:
+   *    FT_Get_CID_Is_Internally_CID_Keyed
+   *
+   * @description:
+   *    Retrieve the type of the input face, CID keyed or not.  In
+   *    constrast to the @FT_IS_CID_KEYED macro this function returns
+   *    successfully also for CID-keyed fonts in an SNFT wrapper.
+   *
+   * @input:
+   *    face ::
+   *       A handle to the input face.
+   *
+   * @output:
+   *    is_cid ::
+   *       The type of the face as an @FT_Bool.
+   *
+   * @return:
+   *    FreeType error code.  0~means success.
+   *
+   * @note:
+   *    This function only works with CID faces and OpenType fonts,
+   *    returning an error otherwise.
+   *
+   * @since:
+   *    2.3.9
+   */
+  FT_EXPORT( FT_Error )
+  FT_Get_CID_Is_Internally_CID_Keyed( FT_Face   face,
+                                      FT_Bool  *is_cid );
+
+
+  /**********************************************************************
+   *
+   * @function:
+   *    FT_Get_CID_From_Glyph_Index
+   *
+   * @description:
+   *    Retrieve the CID of the input glyph index.
+   *
+   * @input:
+   *    face ::
+   *       A handle to the input face.
+   *
+   *    glyph_index ::
+   *       The input glyph index.
+   *
+   * @output:
+   *    cid ::
+   *       The CID as an @FT_UInt.
+   *
+   * @return:
+   *    FreeType error code.  0~means success.
+   *
+   * @note:
+   *    This function only works with CID faces and OpenType fonts,
+   *    returning an error otherwise.
+   *
+   * @since:
+   *    2.3.9
+   */
+  FT_EXPORT( FT_Error )
+  FT_Get_CID_From_Glyph_Index( FT_Face   face,
+                               FT_UInt   glyph_index,
+                               FT_UInt  *cid );
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTCID_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/fterrdef.h b/darwin-x86_64/freetype/include/freetype2/fterrdef.h
new file mode 100644
index 0000000..1bf0751
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/fterrdef.h
@@ -0,0 +1,249 @@
+/***************************************************************************/
+/*                                                                         */
+/*  fterrdef.h                                                             */
+/*                                                                         */
+/*    FreeType error codes (specification).                                */
+/*                                                                         */
+/*  Copyright 2002-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+  /*******************************************************************/
+  /*******************************************************************/
+  /*****                                                         *****/
+  /*****                LIST OF ERROR CODES/MESSAGES             *****/
+  /*****                                                         *****/
+  /*******************************************************************/
+  /*******************************************************************/
+
+
+  /* You need to define both FT_ERRORDEF_ and FT_NOERRORDEF_ before */
+  /* including this file.                                           */
+
+
+  /* generic errors */
+
+  FT_NOERRORDEF_( Ok,                                        0x00,
+                  "no error" )
+
+  FT_ERRORDEF_( Cannot_Open_Resource,                        0x01,
+                "cannot open resource" )
+  FT_ERRORDEF_( Unknown_File_Format,                         0x02,
+                "unknown file format" )
+  FT_ERRORDEF_( Invalid_File_Format,                         0x03,
+                "broken file" )
+  FT_ERRORDEF_( Invalid_Version,                             0x04,
+                "invalid FreeType version" )
+  FT_ERRORDEF_( Lower_Module_Version,                        0x05,
+                "module version is too low" )
+  FT_ERRORDEF_( Invalid_Argument,                            0x06,
+                "invalid argument" )
+  FT_ERRORDEF_( Unimplemented_Feature,                       0x07,
+                "unimplemented feature" )
+  FT_ERRORDEF_( Invalid_Table,                               0x08,
+                "broken table" )
+  FT_ERRORDEF_( Invalid_Offset,                              0x09,
+                "broken offset within table" )
+  FT_ERRORDEF_( Array_Too_Large,                             0x0A,
+                "array allocation size too large" )
+  FT_ERRORDEF_( Missing_Module,                              0x0B,
+                "missing module" )
+  FT_ERRORDEF_( Missing_Property,                            0x0C,
+                "missing property" )
+
+  /* glyph/character errors */
+
+  FT_ERRORDEF_( Invalid_Glyph_Index,                         0x10,
+                "invalid glyph index" )
+  FT_ERRORDEF_( Invalid_Character_Code,                      0x11,
+                "invalid character code" )
+  FT_ERRORDEF_( Invalid_Glyph_Format,                        0x12,
+                "unsupported glyph image format" )
+  FT_ERRORDEF_( Cannot_Render_Glyph,                         0x13,
+                "cannot render this glyph format" )
+  FT_ERRORDEF_( Invalid_Outline,                             0x14,
+                "invalid outline" )
+  FT_ERRORDEF_( Invalid_Composite,                           0x15,
+                "invalid composite glyph" )
+  FT_ERRORDEF_( Too_Many_Hints,                              0x16,
+                "too many hints" )
+  FT_ERRORDEF_( Invalid_Pixel_Size,                          0x17,
+                "invalid pixel size" )
+
+  /* handle errors */
+
+  FT_ERRORDEF_( Invalid_Handle,                              0x20,
+                "invalid object handle" )
+  FT_ERRORDEF_( Invalid_Library_Handle,                      0x21,
+                "invalid library handle" )
+  FT_ERRORDEF_( Invalid_Driver_Handle,                       0x22,
+                "invalid module handle" )
+  FT_ERRORDEF_( Invalid_Face_Handle,                         0x23,
+                "invalid face handle" )
+  FT_ERRORDEF_( Invalid_Size_Handle,                         0x24,
+                "invalid size handle" )
+  FT_ERRORDEF_( Invalid_Slot_Handle,                         0x25,
+                "invalid glyph slot handle" )
+  FT_ERRORDEF_( Invalid_CharMap_Handle,                      0x26,
+                "invalid charmap handle" )
+  FT_ERRORDEF_( Invalid_Cache_Handle,                        0x27,
+                "invalid cache manager handle" )
+  FT_ERRORDEF_( Invalid_Stream_Handle,                       0x28,
+                "invalid stream handle" )
+
+  /* driver errors */
+
+  FT_ERRORDEF_( Too_Many_Drivers,                            0x30,
+                "too many modules" )
+  FT_ERRORDEF_( Too_Many_Extensions,                         0x31,
+                "too many extensions" )
+
+  /* memory errors */
+
+  FT_ERRORDEF_( Out_Of_Memory,                               0x40,
+                "out of memory" )
+  FT_ERRORDEF_( Unlisted_Object,                             0x41,
+                "unlisted object" )
+
+  /* stream errors */
+
+  FT_ERRORDEF_( Cannot_Open_Stream,                          0x51,
+                "cannot open stream" )
+  FT_ERRORDEF_( Invalid_Stream_Seek,                         0x52,
+                "invalid stream seek" )
+  FT_ERRORDEF_( Invalid_Stream_Skip,                         0x53,
+                "invalid stream skip" )
+  FT_ERRORDEF_( Invalid_Stream_Read,                         0x54,
+                "invalid stream read" )
+  FT_ERRORDEF_( Invalid_Stream_Operation,                    0x55,
+                "invalid stream operation" )
+  FT_ERRORDEF_( Invalid_Frame_Operation,                     0x56,
+                "invalid frame operation" )
+  FT_ERRORDEF_( Nested_Frame_Access,                         0x57,
+                "nested frame access" )
+  FT_ERRORDEF_( Invalid_Frame_Read,                          0x58,
+                "invalid frame read" )
+
+  /* raster errors */
+
+  FT_ERRORDEF_( Raster_Uninitialized,                        0x60,
+                "raster uninitialized" )
+  FT_ERRORDEF_( Raster_Corrupted,                            0x61,
+                "raster corrupted" )
+  FT_ERRORDEF_( Raster_Overflow,                             0x62,
+                "raster overflow" )
+  FT_ERRORDEF_( Raster_Negative_Height,                      0x63,
+                "negative height while rastering" )
+
+  /* cache errors */
+
+  FT_ERRORDEF_( Too_Many_Caches,                             0x70,
+                "too many registered caches" )
+
+  /* TrueType and SFNT errors */
+
+  FT_ERRORDEF_( Invalid_Opcode,                              0x80,
+                "invalid opcode" )
+  FT_ERRORDEF_( Too_Few_Arguments,                           0x81,
+                "too few arguments" )
+  FT_ERRORDEF_( Stack_Overflow,                              0x82,
+                "stack overflow" )
+  FT_ERRORDEF_( Code_Overflow,                               0x83,
+                "code overflow" )
+  FT_ERRORDEF_( Bad_Argument,                                0x84,
+                "bad argument" )
+  FT_ERRORDEF_( Divide_By_Zero,                              0x85,
+                "division by zero" )
+  FT_ERRORDEF_( Invalid_Reference,                           0x86,
+                "invalid reference" )
+  FT_ERRORDEF_( Debug_OpCode,                                0x87,
+                "found debug opcode" )
+  FT_ERRORDEF_( ENDF_In_Exec_Stream,                         0x88,
+                "found ENDF opcode in execution stream" )
+  FT_ERRORDEF_( Nested_DEFS,                                 0x89,
+                "nested DEFS" )
+  FT_ERRORDEF_( Invalid_CodeRange,                           0x8A,
+                "invalid code range" )
+  FT_ERRORDEF_( Execution_Too_Long,                          0x8B,
+                "execution context too long" )
+  FT_ERRORDEF_( Too_Many_Function_Defs,                      0x8C,
+                "too many function definitions" )
+  FT_ERRORDEF_( Too_Many_Instruction_Defs,                   0x8D,
+                "too many instruction definitions" )
+  FT_ERRORDEF_( Table_Missing,                               0x8E,
+                "SFNT font table missing" )
+  FT_ERRORDEF_( Horiz_Header_Missing,                        0x8F,
+                "horizontal header (hhea) table missing" )
+  FT_ERRORDEF_( Locations_Missing,                           0x90,
+                "locations (loca) table missing" )
+  FT_ERRORDEF_( Name_Table_Missing,                          0x91,
+                "name table missing" )
+  FT_ERRORDEF_( CMap_Table_Missing,                          0x92,
+                "character map (cmap) table missing" )
+  FT_ERRORDEF_( Hmtx_Table_Missing,                          0x93,
+                "horizontal metrics (hmtx) table missing" )
+  FT_ERRORDEF_( Post_Table_Missing,                          0x94,
+                "PostScript (post) table missing" )
+  FT_ERRORDEF_( Invalid_Horiz_Metrics,                       0x95,
+                "invalid horizontal metrics" )
+  FT_ERRORDEF_( Invalid_CharMap_Format,                      0x96,
+                "invalid character map (cmap) format" )
+  FT_ERRORDEF_( Invalid_PPem,                                0x97,
+                "invalid ppem value" )
+  FT_ERRORDEF_( Invalid_Vert_Metrics,                        0x98,
+                "invalid vertical metrics" )
+  FT_ERRORDEF_( Could_Not_Find_Context,                      0x99,
+                "could not find context" )
+  FT_ERRORDEF_( Invalid_Post_Table_Format,                   0x9A,
+                "invalid PostScript (post) table format" )
+  FT_ERRORDEF_( Invalid_Post_Table,                          0x9B,
+                "invalid PostScript (post) table" )
+
+  /* CFF, CID, and Type 1 errors */
+
+  FT_ERRORDEF_( Syntax_Error,                                0xA0,
+                "opcode syntax error" )
+  FT_ERRORDEF_( Stack_Underflow,                             0xA1,
+                "argument stack underflow" )
+  FT_ERRORDEF_( Ignore,                                      0xA2,
+                "ignore" )
+  FT_ERRORDEF_( No_Unicode_Glyph_Name,                       0xA3,
+                "no Unicode glyph name found" )
+  FT_ERRORDEF_( Glyph_Too_Big,                               0xA4,
+                "glyph to big for hinting" )
+
+  /* BDF errors */
+
+  FT_ERRORDEF_( Missing_Startfont_Field,                     0xB0,
+                "`STARTFONT' field missing" )
+  FT_ERRORDEF_( Missing_Font_Field,                          0xB1,
+                "`FONT' field missing" )
+  FT_ERRORDEF_( Missing_Size_Field,                          0xB2,
+                "`SIZE' field missing" )
+  FT_ERRORDEF_( Missing_Fontboundingbox_Field,               0xB3,
+                "`FONTBOUNDINGBOX' field missing" )
+  FT_ERRORDEF_( Missing_Chars_Field,                         0xB4,
+                "`CHARS' field missing" )
+  FT_ERRORDEF_( Missing_Startchar_Field,                     0xB5,
+                "`STARTCHAR' field missing" )
+  FT_ERRORDEF_( Missing_Encoding_Field,                      0xB6,
+                "`ENCODING' field missing" )
+  FT_ERRORDEF_( Missing_Bbx_Field,                           0xB7,
+                "`BBX' field missing" )
+  FT_ERRORDEF_( Bbx_Too_Big,                                 0xB8,
+                "`BBX' too big" )
+  FT_ERRORDEF_( Corrupted_Font_Header,                       0xB9,
+                "Font header corrupted or missing fields" )
+  FT_ERRORDEF_( Corrupted_Font_Glyphs,                       0xBA,
+                "Font glyphs corrupted or missing fields" )
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/fterrors.h b/darwin-x86_64/freetype/include/freetype2/fterrors.h
new file mode 100644
index 0000000..376bee6
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/fterrors.h
@@ -0,0 +1,198 @@
+/***************************************************************************/
+/*                                                                         */
+/*  fterrors.h                                                             */
+/*                                                                         */
+/*    FreeType error code handling (specification).                        */
+/*                                                                         */
+/*  Copyright 1996-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* This special header file is used to define the handling of FT2        */
+  /* enumeration constants.  It can also be used to generate error message */
+  /* strings with a small macro trick explained below.                     */
+  /*                                                                       */
+  /* I - Error Formats                                                     */
+  /* -----------------                                                     */
+  /*                                                                       */
+  /*   The configuration macro FT_CONFIG_OPTION_USE_MODULE_ERRORS can be   */
+  /*   defined in ftoption.h in order to make the higher byte indicate     */
+  /*   the module where the error has happened (this is not compatible     */
+  /*   with standard builds of FreeType 2).  See the file `ftmoderr.h' for */
+  /*   more details.                                                       */
+  /*                                                                       */
+  /*                                                                       */
+  /* II - Error Message strings                                            */
+  /* --------------------------                                            */
+  /*                                                                       */
+  /*   The error definitions below are made through special macros that    */
+  /*   allow client applications to build a table of error message strings */
+  /*   if they need it.  The strings are not included in a normal build of */
+  /*   FreeType 2 to save space (most client applications do not use       */
+  /*   them).                                                              */
+  /*                                                                       */
+  /*   To do so, you have to define the following macros before including  */
+  /*   this file:                                                          */
+  /*                                                                       */
+  /*   FT_ERROR_START_LIST ::                                              */
+  /*     This macro is called before anything else to define the start of  */
+  /*     the error list.  It is followed by several FT_ERROR_DEF calls     */
+  /*     (see below).                                                      */
+  /*                                                                       */
+  /*   FT_ERROR_DEF( e, v, s ) ::                                          */
+  /*     This macro is called to define one single error.                  */
+  /*     `e' is the error code identifier (e.g. FT_Err_Invalid_Argument).  */
+  /*     `v' is the error numerical value.                                 */
+  /*     `s' is the corresponding error string.                            */
+  /*                                                                       */
+  /*   FT_ERROR_END_LIST ::                                                */
+  /*     This macro ends the list.                                         */
+  /*                                                                       */
+  /*   Additionally, you have to undefine __FTERRORS_H__ before #including */
+  /*   this file.                                                          */
+  /*                                                                       */
+  /*   Here is a simple example:                                           */
+  /*                                                                       */
+  /*     {                                                                 */
+  /*       #undef __FTERRORS_H__                                           */
+  /*       #define FT_ERRORDEF( e, v, s )  { e, s },                       */
+  /*       #define FT_ERROR_START_LIST     {                               */
+  /*       #define FT_ERROR_END_LIST       { 0, 0 } };                     */
+  /*                                                                       */
+  /*       const struct                                                    */
+  /*       {                                                               */
+  /*         int          err_code;                                        */
+  /*         const char*  err_msg;                                         */
+  /*       } ft_errors[] =                                                 */
+  /*                                                                       */
+  /*       #include FT_ERRORS_H                                            */
+  /*     }                                                                 */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+#ifndef __FTERRORS_H__
+#define __FTERRORS_H__
+
+
+  /* include module base error codes */
+#include FT_MODULE_ERRORS_H
+
+
+  /*******************************************************************/
+  /*******************************************************************/
+  /*****                                                         *****/
+  /*****                       SETUP MACROS                      *****/
+  /*****                                                         *****/
+  /*******************************************************************/
+  /*******************************************************************/
+
+
+#undef  FT_NEED_EXTERN_C
+
+
+  /* FT_ERR_PREFIX is used as a prefix for error identifiers. */
+  /* By default, we use `FT_Err_'.                            */
+  /*                                                          */
+#ifndef FT_ERR_PREFIX
+#define FT_ERR_PREFIX  FT_Err_
+#endif
+
+
+  /* FT_ERR_BASE is used as the base for module-specific errors. */
+  /*                                                             */
+#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
+
+#ifndef FT_ERR_BASE
+#define FT_ERR_BASE  FT_Mod_Err_Base
+#endif
+
+#else
+
+#undef FT_ERR_BASE
+#define FT_ERR_BASE  0
+
+#endif /* FT_CONFIG_OPTION_USE_MODULE_ERRORS */
+
+
+  /* If FT_ERRORDEF is not defined, we need to define a simple */
+  /* enumeration type.                                         */
+  /*                                                           */
+#ifndef FT_ERRORDEF
+
+#define FT_ERRORDEF( e, v, s )  e = v,
+#define FT_ERROR_START_LIST     enum {
+#define FT_ERROR_END_LIST       FT_ERR_CAT( FT_ERR_PREFIX, Max ) };
+
+#ifdef __cplusplus
+#define FT_NEED_EXTERN_C
+  extern "C" {
+#endif
+
+#endif /* !FT_ERRORDEF */
+
+
+  /* this macro is used to define an error */
+#define FT_ERRORDEF_( e, v, s )                                             \
+          FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s )
+
+  /* this is only used for <module>_Err_Ok, which must be 0! */
+#define FT_NOERRORDEF_( e, v, s )                             \
+          FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s )
+
+
+#ifdef FT_ERROR_START_LIST
+  FT_ERROR_START_LIST
+#endif
+
+
+  /* now include the error codes */
+#include FT_ERROR_DEFINITIONS_H
+
+
+#ifdef FT_ERROR_END_LIST
+  FT_ERROR_END_LIST
+#endif
+
+
+  /*******************************************************************/
+  /*******************************************************************/
+  /*****                                                         *****/
+  /*****                      SIMPLE CLEANUP                     *****/
+  /*****                                                         *****/
+  /*******************************************************************/
+  /*******************************************************************/
+
+#ifdef FT_NEED_EXTERN_C
+  }
+#endif
+
+#undef FT_ERROR_START_LIST
+#undef FT_ERROR_END_LIST
+
+#undef FT_ERRORDEF
+#undef FT_ERRORDEF_
+#undef FT_NOERRORDEF_
+
+#undef FT_NEED_EXTERN_C
+#undef FT_ERR_BASE
+
+  /* FT_ERR_PREFIX is needed internally */
+#ifndef FT2_BUILD_LIBRARY
+#undef FT_ERR_PREFIX
+#endif
+
+#endif /* __FTERRORS_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftfntfmt.h b/darwin-x86_64/freetype/include/freetype2/ftfntfmt.h
new file mode 100644
index 0000000..1f8ff28
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftfntfmt.h
@@ -0,0 +1,92 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftfntfmt.h                                                             */
+/*                                                                         */
+/*    Support functions for font formats.                                  */
+/*                                                                         */
+/*  Copyright 2002-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTFNTFMT_H__
+#define __FTFNTFMT_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*   font_formats                                                        */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*   Font Formats                                                        */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*   Getting the font format.                                            */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*   The single function in this section can be used to get the font     */
+  /*   format.  Note that this information is not needed normally;         */
+  /*   however, there are special cases (like in PDF devices) where it is  */
+  /*   important to differentiate, in spite of FreeType's uniform API.     */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*   FT_Get_Font_Format                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*   Return a string describing the format of a given face.  Possible    */
+  /*   values are `TrueType', `Type~1', `BDF', `PCF', `Type~42',           */
+  /*   `CID~Type~1', `CFF', `PFR', and `Windows~FNT'.                      */
+  /*                                                                       */
+  /*   The return value is suitable to be used as an X11 FONT_PROPERTY.    */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*   face ::                                                             */
+  /*     Input face handle.                                                */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*   Font format string.  NULL in case of error.                         */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*   A deprecated name for the same function is                          */
+  /*   `FT_Get_X11_Font_Format'.                                           */
+  /*                                                                       */
+  FT_EXPORT( const char* )
+  FT_Get_Font_Format( FT_Face  face );
+
+
+  /* deprecated */
+  FT_EXPORT( const char* )
+  FT_Get_X11_Font_Format( FT_Face  face );
+
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTFNTFMT_H__ */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftgasp.h b/darwin-x86_64/freetype/include/freetype2/ftgasp.h
new file mode 100644
index 0000000..9a9b632
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftgasp.h
@@ -0,0 +1,129 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftgasp.h                                                               */
+/*                                                                         */
+/*    Access of TrueType's `gasp' table (specification).                   */
+/*                                                                         */
+/*  Copyright 2007-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef _FT_GASP_H_
+#define _FT_GASP_H_
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+  /***************************************************************************
+   *
+   * @section:
+   *   gasp_table
+   *
+   * @title:
+   *   Gasp Table
+   *
+   * @abstract:
+   *   Retrieving TrueType `gasp' table entries.
+   *
+   * @description:
+   *   The function @FT_Get_Gasp can be used to query a TrueType or OpenType
+   *   font for specific entries in its `gasp' table, if any.  This is
+   *   mainly useful when implementing native TrueType hinting with the
+   *   bytecode interpreter to duplicate the Windows text rendering results.
+   */
+
+  /*************************************************************************
+   *
+   * @enum:
+   *   FT_GASP_XXX
+   *
+   * @description:
+   *   A list of values and/or bit-flags returned by the @FT_Get_Gasp
+   *   function.
+   *
+   * @values:
+   *   FT_GASP_NO_TABLE ::
+   *     This special value means that there is no GASP table in this face.
+   *     It is up to the client to decide what to do.
+   *
+   *   FT_GASP_DO_GRIDFIT ::
+   *     Grid-fitting and hinting should be performed at the specified ppem.
+   *     This *really* means TrueType bytecode interpretation.  If this bit
+   *     is not set, no hinting gets applied.
+   *
+   *   FT_GASP_DO_GRAY ::
+   *     Anti-aliased rendering should be performed at the specified ppem.
+   *     If not set, do monochrome rendering.
+   *
+   *   FT_GASP_SYMMETRIC_SMOOTHING ::
+   *     If set, smoothing along multiple axes must be used with ClearType.
+   *
+   *   FT_GASP_SYMMETRIC_GRIDFIT ::
+   *     Grid-fitting must be used with ClearType's symmetric smoothing.
+   *
+   * @note:
+   *   The bit-flags `FT_GASP_DO_GRIDFIT' and `FT_GASP_DO_GRAY' are to be
+   *   used for standard font rasterization only.  Independently of that,
+   *   `FT_GASP_SYMMETRIC_SMOOTHING' and `FT_GASP_SYMMETRIC_GRIDFIT' are to
+   *   be used if ClearType is enabled (and `FT_GASP_DO_GRIDFIT' and
+   *   `FT_GASP_DO_GRAY' are consequently ignored).
+   *
+   *   `ClearType' is Microsoft's implementation of LCD rendering, partly
+   *   protected by patents.
+   *
+   * @since:
+   *   2.3.0
+   */
+#define FT_GASP_NO_TABLE               -1
+#define FT_GASP_DO_GRIDFIT           0x01
+#define FT_GASP_DO_GRAY              0x02
+#define FT_GASP_SYMMETRIC_SMOOTHING  0x08
+#define FT_GASP_SYMMETRIC_GRIDFIT    0x10
+
+
+  /*************************************************************************
+   *
+   * @func:
+   *   FT_Get_Gasp
+   *
+   * @description:
+   *   Read the `gasp' table from a TrueType or OpenType font file and
+   *   return the entry corresponding to a given character pixel size.
+   *
+   * @input:
+   *   face :: The source face handle.
+   *   ppem :: The vertical character pixel size.
+   *
+   * @return:
+   *   Bit flags (see @FT_GASP_XXX), or @FT_GASP_NO_TABLE if there is no
+   *   `gasp' table in the face.
+   *
+   * @since:
+   *   2.3.0
+   */
+  FT_EXPORT( FT_Int )
+  FT_Get_Gasp( FT_Face  face,
+               FT_UInt  ppem );
+
+  /* */
+
+
+#endif /* _FT_GASP_H_ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftglyph.h b/darwin-x86_64/freetype/include/freetype2/ftglyph.h
new file mode 100644
index 0000000..803ad39
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftglyph.h
@@ -0,0 +1,605 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftglyph.h                                                              */
+/*                                                                         */
+/*    FreeType convenience functions to handle glyphs (specification).     */
+/*                                                                         */
+/*  Copyright 1996-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* This file contains the definition of several convenience functions    */
+  /* that can be used by client applications to easily retrieve glyph      */
+  /* bitmaps and outlines from a given face.                               */
+  /*                                                                       */
+  /* These functions should be optional if you are writing a font server   */
+  /* or text layout engine on top of FreeType.  However, they are pretty   */
+  /* handy for many other simple uses of the library.                      */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+#ifndef __FTGLYPH_H__
+#define __FTGLYPH_H__
+
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    glyph_management                                                   */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    Glyph Management                                                   */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    Generic interface to manage individual glyph data.                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section contains definitions used to manage glyph data        */
+  /*    through generic FT_Glyph objects.  Each of them can contain a      */
+  /*    bitmap, a vector outline, or even images in other formats.         */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /* forward declaration to a private type */
+  typedef struct FT_Glyph_Class_  FT_Glyph_Class;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Glyph                                                           */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Handle to an object used to model generic glyph images.  It is a   */
+  /*    pointer to the @FT_GlyphRec structure and can contain a glyph      */
+  /*    bitmap or pointer.                                                 */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Glyph objects are not owned by the library.  You must thus release */
+  /*    them manually (through @FT_Done_Glyph) _before_ calling            */
+  /*    @FT_Done_FreeType.                                                 */
+  /*                                                                       */
+  typedef struct FT_GlyphRec_*  FT_Glyph;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_GlyphRec                                                        */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    The root glyph structure contains a given glyph image plus its     */
+  /*    advance width in 16.16 fixed-point format.                         */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    library :: A handle to the FreeType library object.                */
+  /*                                                                       */
+  /*    clazz   :: A pointer to the glyph's class.  Private.               */
+  /*                                                                       */
+  /*    format  :: The format of the glyph's image.                        */
+  /*                                                                       */
+  /*    advance :: A 16.16 vector that gives the glyph's advance width.    */
+  /*                                                                       */
+  typedef struct  FT_GlyphRec_
+  {
+    FT_Library             library;
+    const FT_Glyph_Class*  clazz;
+    FT_Glyph_Format        format;
+    FT_Vector              advance;
+
+  } FT_GlyphRec;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_BitmapGlyph                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to an object used to model a bitmap glyph image.  This is */
+  /*    a sub-class of @FT_Glyph, and a pointer to @FT_BitmapGlyphRec.     */
+  /*                                                                       */
+  typedef struct FT_BitmapGlyphRec_*  FT_BitmapGlyph;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_BitmapGlyphRec                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A structure used for bitmap glyph images.  This really is a        */
+  /*    `sub-class' of @FT_GlyphRec.                                       */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    root   :: The root @FT_Glyph fields.                               */
+  /*                                                                       */
+  /*    left   :: The left-side bearing, i.e., the horizontal distance     */
+  /*              from the current pen position to the left border of the  */
+  /*              glyph bitmap.                                            */
+  /*                                                                       */
+  /*    top    :: The top-side bearing, i.e., the vertical distance from   */
+  /*              the current pen position to the top border of the glyph  */
+  /*              bitmap.  This distance is positive for upwards~y!        */
+  /*                                                                       */
+  /*    bitmap :: A descriptor for the bitmap.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    You can typecast an @FT_Glyph to @FT_BitmapGlyph if you have       */
+  /*    `glyph->format == FT_GLYPH_FORMAT_BITMAP'.  This lets you access   */
+  /*    the bitmap's contents easily.                                      */
+  /*                                                                       */
+  /*    The corresponding pixel buffer is always owned by @FT_BitmapGlyph  */
+  /*    and is thus created and destroyed with it.                         */
+  /*                                                                       */
+  typedef struct  FT_BitmapGlyphRec_
+  {
+    FT_GlyphRec  root;
+    FT_Int       left;
+    FT_Int       top;
+    FT_Bitmap    bitmap;
+
+  } FT_BitmapGlyphRec;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_OutlineGlyph                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A handle to an object used to model an outline glyph image.  This  */
+  /*    is a sub-class of @FT_Glyph, and a pointer to @FT_OutlineGlyphRec. */
+  /*                                                                       */
+  typedef struct FT_OutlineGlyphRec_*  FT_OutlineGlyph;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_OutlineGlyphRec                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A structure used for outline (vectorial) glyph images.  This       */
+  /*    really is a `sub-class' of @FT_GlyphRec.                           */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    root    :: The root @FT_Glyph fields.                              */
+  /*                                                                       */
+  /*    outline :: A descriptor for the outline.                           */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    You can typecast an @FT_Glyph to @FT_OutlineGlyph if you have      */
+  /*    `glyph->format == FT_GLYPH_FORMAT_OUTLINE'.  This lets you access  */
+  /*    the outline's content easily.                                      */
+  /*                                                                       */
+  /*    As the outline is extracted from a glyph slot, its coordinates are */
+  /*    expressed normally in 26.6 pixels, unless the flag                 */
+  /*    @FT_LOAD_NO_SCALE was used in @FT_Load_Glyph() or @FT_Load_Char(). */
+  /*                                                                       */
+  /*    The outline's tables are always owned by the object and are        */
+  /*    destroyed with it.                                                 */
+  /*                                                                       */
+  typedef struct  FT_OutlineGlyphRec_
+  {
+    FT_GlyphRec  root;
+    FT_Outline   outline;
+
+  } FT_OutlineGlyphRec;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Get_Glyph                                                       */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A function used to extract a glyph image from a slot.  Note that   */
+  /*    the created @FT_Glyph object must be released with @FT_Done_Glyph. */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    slot   :: A handle to the source glyph slot.                       */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    aglyph :: A handle to the glyph object.                            */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Get_Glyph( FT_GlyphSlot  slot,
+                FT_Glyph     *aglyph );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Glyph_Copy                                                      */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A function used to copy a glyph image.  Note that the created      */
+  /*    @FT_Glyph object must be released with @FT_Done_Glyph.             */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    source :: A handle to the source glyph object.                     */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    target :: A handle to the target glyph object.  0~in case of       */
+  /*              error.                                                   */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Glyph_Copy( FT_Glyph   source,
+                 FT_Glyph  *target );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Glyph_Transform                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Transform a glyph image if its format is scalable.                 */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    glyph  :: A handle to the target glyph object.                     */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    matrix :: A pointer to a 2x2 matrix to apply.                      */
+  /*                                                                       */
+  /*    delta  :: A pointer to a 2d vector to apply.  Coordinates are      */
+  /*              expressed in 1/64th of a pixel.                          */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code (if not 0, the glyph format is not scalable).  */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The 2x2 transformation matrix is also applied to the glyph's       */
+  /*    advance vector.                                                    */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Glyph_Transform( FT_Glyph    glyph,
+                      FT_Matrix*  matrix,
+                      FT_Vector*  delta );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Enum>                                                                */
+  /*    FT_Glyph_BBox_Mode                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    The mode how the values of @FT_Glyph_Get_CBox are returned.        */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_GLYPH_BBOX_UNSCALED ::                                          */
+  /*      Return unscaled font units.                                      */
+  /*                                                                       */
+  /*    FT_GLYPH_BBOX_SUBPIXELS ::                                         */
+  /*      Return unfitted 26.6 coordinates.                                */
+  /*                                                                       */
+  /*    FT_GLYPH_BBOX_GRIDFIT ::                                           */
+  /*      Return grid-fitted 26.6 coordinates.                             */
+  /*                                                                       */
+  /*    FT_GLYPH_BBOX_TRUNCATE ::                                          */
+  /*      Return coordinates in integer pixels.                            */
+  /*                                                                       */
+  /*    FT_GLYPH_BBOX_PIXELS ::                                            */
+  /*      Return grid-fitted pixel coordinates.                            */
+  /*                                                                       */
+  typedef enum  FT_Glyph_BBox_Mode_
+  {
+    FT_GLYPH_BBOX_UNSCALED  = 0,
+    FT_GLYPH_BBOX_SUBPIXELS = 0,
+    FT_GLYPH_BBOX_GRIDFIT   = 1,
+    FT_GLYPH_BBOX_TRUNCATE  = 2,
+    FT_GLYPH_BBOX_PIXELS    = 3
+
+  } FT_Glyph_BBox_Mode;
+
+
+  /* these constants are deprecated; use the corresponding */
+  /* `FT_Glyph_BBox_Mode' values instead                   */
+#define ft_glyph_bbox_unscaled   FT_GLYPH_BBOX_UNSCALED
+#define ft_glyph_bbox_subpixels  FT_GLYPH_BBOX_SUBPIXELS
+#define ft_glyph_bbox_gridfit    FT_GLYPH_BBOX_GRIDFIT
+#define ft_glyph_bbox_truncate   FT_GLYPH_BBOX_TRUNCATE
+#define ft_glyph_bbox_pixels     FT_GLYPH_BBOX_PIXELS
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Glyph_Get_CBox                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return a glyph's `control box'.  The control box encloses all the  */
+  /*    outline's points, including Bézier control points.  Though it      */
+  /*    coincides with the exact bounding box for most glyphs, it can be   */
+  /*    slightly larger in some situations (like when rotating an outline  */
+  /*    that contains Bézier outside arcs).                                */
+  /*                                                                       */
+  /*    Computing the control box is very fast, while getting the bounding */
+  /*    box can take much more time as it needs to walk over all segments  */
+  /*    and arcs in the outline.  To get the latter, you can use the       */
+  /*    `ftbbox' component, which is dedicated to this single task.        */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    glyph :: A handle to the source glyph object.                      */
+  /*                                                                       */
+  /*    mode  :: The mode that indicates how to interpret the returned     */
+  /*             bounding box values.                                      */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    acbox :: The glyph coordinate bounding box.  Coordinates are       */
+  /*             expressed in 1/64th of pixels if it is grid-fitted.       */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    Coordinates are relative to the glyph origin, using the y~upwards  */
+  /*    convention.                                                        */
+  /*                                                                       */
+  /*    If the glyph has been loaded with @FT_LOAD_NO_SCALE, `bbox_mode'   */
+  /*    must be set to @FT_GLYPH_BBOX_UNSCALED to get unscaled font        */
+  /*    units in 26.6 pixel format.  The value @FT_GLYPH_BBOX_SUBPIXELS    */
+  /*    is another name for this constant.                                 */
+  /*                                                                       */
+  /*    If the font is tricky and the glyph has been loaded with           */
+  /*    @FT_LOAD_NO_SCALE, the resulting CBox is meaningless.  To get      */
+  /*    reasonable values for the CBox it is necessary to load the glyph   */
+  /*    at a large ppem value (so that the hinting instructions can        */
+  /*    properly shift and scale the subglyphs), then extracting the CBox, */
+  /*    which can be eventually converted back to font units.              */
+  /*                                                                       */
+  /*    Note that the maximum coordinates are exclusive, which means that  */
+  /*    one can compute the width and height of the glyph image (be it in  */
+  /*    integer or 26.6 pixels) as:                                        */
+  /*                                                                       */
+  /*    {                                                                  */
+  /*      width  = bbox.xMax - bbox.xMin;                                  */
+  /*      height = bbox.yMax - bbox.yMin;                                  */
+  /*    }                                                                  */
+  /*                                                                       */
+  /*    Note also that for 26.6 coordinates, if `bbox_mode' is set to      */
+  /*    @FT_GLYPH_BBOX_GRIDFIT, the coordinates will also be grid-fitted,  */
+  /*    which corresponds to:                                              */
+  /*                                                                       */
+  /*    {                                                                  */
+  /*      bbox.xMin = FLOOR(bbox.xMin);                                    */
+  /*      bbox.yMin = FLOOR(bbox.yMin);                                    */
+  /*      bbox.xMax = CEILING(bbox.xMax);                                  */
+  /*      bbox.yMax = CEILING(bbox.yMax);                                  */
+  /*    }                                                                  */
+  /*                                                                       */
+  /*    To get the bbox in pixel coordinates, set `bbox_mode' to           */
+  /*    @FT_GLYPH_BBOX_TRUNCATE.                                           */
+  /*                                                                       */
+  /*    To get the bbox in grid-fitted pixel coordinates, set `bbox_mode'  */
+  /*    to @FT_GLYPH_BBOX_PIXELS.                                          */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Glyph_Get_CBox( FT_Glyph  glyph,
+                     FT_UInt   bbox_mode,
+                     FT_BBox  *acbox );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Glyph_To_Bitmap                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Convert a given glyph object to a bitmap glyph object.             */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    the_glyph   :: A pointer to a handle to the target glyph.          */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    render_mode :: An enumeration that describes how the data is       */
+  /*                   rendered.                                           */
+  /*                                                                       */
+  /*    origin      :: A pointer to a vector used to translate the glyph   */
+  /*                   image before rendering.  Can be~0 (if no            */
+  /*                   translation).  The origin is expressed in           */
+  /*                   26.6 pixels.                                        */
+  /*                                                                       */
+  /*    destroy     :: A boolean that indicates that the original glyph    */
+  /*                   image should be destroyed by this function.  It is  */
+  /*                   never destroyed in case of error.                   */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function does nothing if the glyph format isn't scalable.     */
+  /*                                                                       */
+  /*    The glyph image is translated with the `origin' vector before      */
+  /*    rendering.                                                         */
+  /*                                                                       */
+  /*    The first parameter is a pointer to an @FT_Glyph handle, that will */
+  /*    be _replaced_ by this function (with newly allocated data).        */
+  /*    Typically, you would use (omitting error handling):                */
+  /*                                                                       */
+  /*                                                                       */
+  /*      {                                                                */
+  /*        FT_Glyph        glyph;                                         */
+  /*        FT_BitmapGlyph  glyph_bitmap;                                  */
+  /*                                                                       */
+  /*                                                                       */
+  /*        // load glyph                                                  */
+  /*        error = FT_Load_Char( face, glyph_index, FT_LOAD_DEFAUT );     */
+  /*                                                                       */
+  /*        // extract glyph image                                         */
+  /*        error = FT_Get_Glyph( face->glyph, &glyph );                   */
+  /*                                                                       */
+  /*        // convert to a bitmap (default render mode + destroying old)  */
+  /*        if ( glyph->format != FT_GLYPH_FORMAT_BITMAP )                 */
+  /*        {                                                              */
+  /*          error = FT_Glyph_To_Bitmap( &glyph, FT_RENDER_MODE_NORMAL,   */
+  /*                                      0, 1 );                          */
+  /*          if ( error ) // `glyph' unchanged                            */
+  /*            ...                                                        */
+  /*        }                                                              */
+  /*                                                                       */
+  /*        // access bitmap content by typecasting                        */
+  /*        glyph_bitmap = (FT_BitmapGlyph)glyph;                          */
+  /*                                                                       */
+  /*        // do funny stuff with it, like blitting/drawing               */
+  /*        ...                                                            */
+  /*                                                                       */
+  /*        // discard glyph image (bitmap or not)                         */
+  /*        FT_Done_Glyph( glyph );                                        */
+  /*      }                                                                */
+  /*                                                                       */
+  /*                                                                       */
+  /*    Here another example, again without error handling:                */
+  /*                                                                       */
+  /*                                                                       */
+  /*      {                                                                */
+  /*        FT_Glyph  glyphs[MAX_GLYPHS]                                   */
+  /*                                                                       */
+  /*                                                                       */
+  /*        ...                                                            */
+  /*                                                                       */
+  /*        for ( idx = 0; i < MAX_GLYPHS; i++ )                           */
+  /*          error = FT_Load_Glyph( face, idx, FT_LOAD_DEFAULT ) ||       */
+  /*                  FT_Get_Glyph ( face->glyph, &glyph[idx] );           */
+  /*                                                                       */
+  /*        ...                                                            */
+  /*                                                                       */
+  /*        for ( idx = 0; i < MAX_GLYPHS; i++ )                           */
+  /*        {                                                              */
+  /*          FT_Glyph  bitmap = glyphs[idx];                              */
+  /*                                                                       */
+  /*                                                                       */
+  /*          ...                                                          */
+  /*                                                                       */
+  /*          // after this call, `bitmap' no longer points into           */
+  /*          // the `glyphs' array (and the old value isn't destroyed)    */
+  /*          FT_Glyph_To_Bitmap( &bitmap, FT_RENDER_MODE_MONO, 0, 0 );    */
+  /*                                                                       */
+  /*          ...                                                          */
+  /*                                                                       */
+  /*          FT_Done_Glyph( bitmap );                                     */
+  /*        }                                                              */
+  /*                                                                       */
+  /*        ...                                                            */
+  /*                                                                       */
+  /*        for ( idx = 0; i < MAX_GLYPHS; i++ )                           */
+  /*          FT_Done_Glyph( glyphs[idx] );                                */
+  /*      }                                                                */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Glyph_To_Bitmap( FT_Glyph*       the_glyph,
+                      FT_Render_Mode  render_mode,
+                      FT_Vector*      origin,
+                      FT_Bool         destroy );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Done_Glyph                                                      */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Destroy a given glyph.                                             */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    glyph :: A handle to the target glyph object.                      */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Done_Glyph( FT_Glyph  glyph );
+
+  /* */
+
+
+  /* other helpful functions */
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    computations                                                       */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Matrix_Multiply                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Perform the matrix operation `b = a*b'.                            */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    a :: A pointer to matrix `a'.                                      */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    b :: A pointer to matrix `b'.                                      */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The result is undefined if either `a' or `b' is zero.              */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Matrix_Multiply( const FT_Matrix*  a,
+                      FT_Matrix*        b );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Matrix_Invert                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Invert a 2x2 matrix.  Return an error if it can't be inverted.     */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    matrix :: A pointer to the target matrix.  Remains untouched in    */
+  /*              case of error.                                           */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Matrix_Invert( FT_Matrix*  matrix );
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTGLYPH_H__ */
+
+
+/* END */
+
+
+/* Local Variables: */
+/* coding: utf-8    */
+/* End:             */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftgxval.h b/darwin-x86_64/freetype/include/freetype2/ftgxval.h
new file mode 100644
index 0000000..0e9ac1d
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftgxval.h
@@ -0,0 +1,357 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftgxval.h                                                              */
+/*                                                                         */
+/*    FreeType API for validating TrueTypeGX/AAT tables (specification).   */
+/*                                                                         */
+/*  Copyright 2004-2015 by                                                 */
+/*  Masatake YAMATO, Redhat K.K,                                           */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+/***************************************************************************/
+/*                                                                         */
+/* gxvalid is derived from both gxlayout module and otvalid module.        */
+/* Development of gxlayout is supported by the Information-technology      */
+/* Promotion Agency(IPA), Japan.                                           */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTGXVAL_H__
+#define __FTGXVAL_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    gx_validation                                                      */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    TrueTypeGX/AAT Validation                                          */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    An API to validate TrueTypeGX/AAT tables.                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section contains the declaration of functions to validate     */
+  /*    some TrueTypeGX tables (feat, mort, morx, bsln, just, kern, opbd,  */
+  /*    trak, prop, lcar).                                                 */
+  /*                                                                       */
+  /* <Order>                                                               */
+  /*    FT_TrueTypeGX_Validate                                             */
+  /*    FT_TrueTypeGX_Free                                                 */
+  /*                                                                       */
+  /*    FT_ClassicKern_Validate                                            */
+  /*    FT_ClassicKern_Free                                                */
+  /*                                                                       */
+  /*    FT_VALIDATE_GX_LENGTH                                              */
+  /*    FT_VALIDATE_GXXXX                                                  */
+  /*    FT_VALIDATE_CKERNXXX                                               */
+  /*                                                                       */
+  /*************************************************************************/
+
+  /*************************************************************************/
+  /*                                                                       */
+  /*                                                                       */
+  /* Warning: Use FT_VALIDATE_XXX to validate a table.                     */
+  /*          Following definitions are for gxvalid developers.            */
+  /*                                                                       */
+  /*                                                                       */
+  /*************************************************************************/
+
+#define FT_VALIDATE_feat_INDEX     0
+#define FT_VALIDATE_mort_INDEX     1
+#define FT_VALIDATE_morx_INDEX     2
+#define FT_VALIDATE_bsln_INDEX     3
+#define FT_VALIDATE_just_INDEX     4
+#define FT_VALIDATE_kern_INDEX     5
+#define FT_VALIDATE_opbd_INDEX     6
+#define FT_VALIDATE_trak_INDEX     7
+#define FT_VALIDATE_prop_INDEX     8
+#define FT_VALIDATE_lcar_INDEX     9
+#define FT_VALIDATE_GX_LAST_INDEX  FT_VALIDATE_lcar_INDEX
+
+
+  /*************************************************************************
+   *
+   * @macro:
+   *   FT_VALIDATE_GX_LENGTH
+   *
+   * @description:
+   *   The number of tables checked in this module.  Use it as a parameter
+   *   for the `table-length' argument of function @FT_TrueTypeGX_Validate.
+   */
+#define FT_VALIDATE_GX_LENGTH     (FT_VALIDATE_GX_LAST_INDEX + 1)
+
+  /* */
+
+  /* Up to 0x1000 is used by otvalid.
+     Ox2xxx is reserved for feature OT extension. */
+#define FT_VALIDATE_GX_START 0x4000
+#define FT_VALIDATE_GX_BITFIELD( tag )                  \
+  ( FT_VALIDATE_GX_START << FT_VALIDATE_##tag##_INDEX )
+
+
+ /**********************************************************************
+  *
+  * @enum:
+  *    FT_VALIDATE_GXXXX
+  *
+  * @description:
+  *    A list of bit-field constants used with @FT_TrueTypeGX_Validate to
+  *    indicate which TrueTypeGX/AAT Type tables should be validated.
+  *
+  * @values:
+  *    FT_VALIDATE_feat ::
+  *      Validate `feat' table.
+  *
+  *    FT_VALIDATE_mort ::
+  *      Validate `mort' table.
+  *
+  *    FT_VALIDATE_morx ::
+  *      Validate `morx' table.
+  *
+  *    FT_VALIDATE_bsln ::
+  *      Validate `bsln' table.
+  *
+  *    FT_VALIDATE_just ::
+  *      Validate `just' table.
+  *
+  *    FT_VALIDATE_kern ::
+  *      Validate `kern' table.
+  *
+  *    FT_VALIDATE_opbd ::
+  *      Validate `opbd' table.
+  *
+  *    FT_VALIDATE_trak ::
+  *      Validate `trak' table.
+  *
+  *    FT_VALIDATE_prop ::
+  *      Validate `prop' table.
+  *
+  *    FT_VALIDATE_lcar ::
+  *      Validate `lcar' table.
+  *
+  *    FT_VALIDATE_GX ::
+  *      Validate all TrueTypeGX tables (feat, mort, morx, bsln, just, kern,
+  *      opbd, trak, prop and lcar).
+  *
+  */
+
+#define FT_VALIDATE_feat  FT_VALIDATE_GX_BITFIELD( feat )
+#define FT_VALIDATE_mort  FT_VALIDATE_GX_BITFIELD( mort )
+#define FT_VALIDATE_morx  FT_VALIDATE_GX_BITFIELD( morx )
+#define FT_VALIDATE_bsln  FT_VALIDATE_GX_BITFIELD( bsln )
+#define FT_VALIDATE_just  FT_VALIDATE_GX_BITFIELD( just )
+#define FT_VALIDATE_kern  FT_VALIDATE_GX_BITFIELD( kern )
+#define FT_VALIDATE_opbd  FT_VALIDATE_GX_BITFIELD( opbd )
+#define FT_VALIDATE_trak  FT_VALIDATE_GX_BITFIELD( trak )
+#define FT_VALIDATE_prop  FT_VALIDATE_GX_BITFIELD( prop )
+#define FT_VALIDATE_lcar  FT_VALIDATE_GX_BITFIELD( lcar )
+
+#define FT_VALIDATE_GX  ( FT_VALIDATE_feat | \
+                          FT_VALIDATE_mort | \
+                          FT_VALIDATE_morx | \
+                          FT_VALIDATE_bsln | \
+                          FT_VALIDATE_just | \
+                          FT_VALIDATE_kern | \
+                          FT_VALIDATE_opbd | \
+                          FT_VALIDATE_trak | \
+                          FT_VALIDATE_prop | \
+                          FT_VALIDATE_lcar )
+
+
+ /**********************************************************************
+  *
+  * @function:
+  *    FT_TrueTypeGX_Validate
+  *
+  * @description:
+  *    Validate various TrueTypeGX tables to assure that all offsets and
+  *    indices are valid.  The idea is that a higher-level library that
+  *    actually does the text layout can access those tables without
+  *    error checking (which can be quite time consuming).
+  *
+  * @input:
+  *    face ::
+  *       A handle to the input face.
+  *
+  *    validation_flags ::
+  *       A bit field that specifies the tables to be validated.  See
+  *       @FT_VALIDATE_GXXXX for possible values.
+  *
+  *    table_length ::
+  *       The size of the `tables' array.  Normally, @FT_VALIDATE_GX_LENGTH
+  *       should be passed.
+  *
+  * @output:
+  *    tables ::
+  *       The array where all validated sfnt tables are stored.
+  *       The array itself must be allocated by a client.
+  *
+  * @return:
+  *   FreeType error code.  0~means success.
+  *
+  * @note:
+  *   This function only works with TrueTypeGX fonts, returning an error
+  *   otherwise.
+  *
+  *   After use, the application should deallocate the buffers pointed to by
+  *   each `tables' element, by calling @FT_TrueTypeGX_Free.  A NULL value
+  *   indicates that the table either doesn't exist in the font, the
+  *   application hasn't asked for validation, or the validator doesn't have
+  *   the ability to validate the sfnt table.
+  */
+  FT_EXPORT( FT_Error )
+  FT_TrueTypeGX_Validate( FT_Face   face,
+                          FT_UInt   validation_flags,
+                          FT_Bytes  tables[FT_VALIDATE_GX_LENGTH],
+                          FT_UInt   table_length );
+
+
+ /**********************************************************************
+  *
+  * @function:
+  *    FT_TrueTypeGX_Free
+  *
+  * @description:
+  *    Free the buffer allocated by TrueTypeGX validator.
+  *
+  * @input:
+  *    face ::
+  *       A handle to the input face.
+  *
+  *    table ::
+  *       The pointer to the buffer allocated by
+  *       @FT_TrueTypeGX_Validate.
+  *
+  * @note:
+  *   This function must be used to free the buffer allocated by
+  *   @FT_TrueTypeGX_Validate only.
+  */
+  FT_EXPORT( void )
+  FT_TrueTypeGX_Free( FT_Face   face,
+                      FT_Bytes  table );
+
+
+ /**********************************************************************
+  *
+  * @enum:
+  *    FT_VALIDATE_CKERNXXX
+  *
+  * @description:
+  *    A list of bit-field constants used with @FT_ClassicKern_Validate
+  *    to indicate the classic kern dialect or dialects.  If the selected
+  *    type doesn't fit, @FT_ClassicKern_Validate regards the table as
+  *    invalid.
+  *
+  * @values:
+  *    FT_VALIDATE_MS ::
+  *      Handle the `kern' table as a classic Microsoft kern table.
+  *
+  *    FT_VALIDATE_APPLE ::
+  *      Handle the `kern' table as a classic Apple kern table.
+  *
+  *    FT_VALIDATE_CKERN ::
+  *      Handle the `kern' as either classic Apple or Microsoft kern table.
+  */
+#define FT_VALIDATE_MS     ( FT_VALIDATE_GX_START << 0 )
+#define FT_VALIDATE_APPLE  ( FT_VALIDATE_GX_START << 1 )
+
+#define FT_VALIDATE_CKERN  ( FT_VALIDATE_MS | FT_VALIDATE_APPLE )
+
+
+ /**********************************************************************
+  *
+  * @function:
+  *    FT_ClassicKern_Validate
+  *
+  * @description:
+  *    Validate classic (16-bit format) kern table to assure that the offsets
+  *    and indices are valid.  The idea is that a higher-level library that
+  *    actually does the text layout can access those tables without error
+  *    checking (which can be quite time consuming).
+  *
+  *    The `kern' table validator in @FT_TrueTypeGX_Validate deals with both
+  *    the new 32-bit format and the classic 16-bit format, while
+  *    FT_ClassicKern_Validate only supports the classic 16-bit format.
+  *
+  * @input:
+  *    face ::
+  *       A handle to the input face.
+  *
+  *    validation_flags ::
+  *       A bit field that specifies the dialect to be validated.  See
+  *       @FT_VALIDATE_CKERNXXX for possible values.
+  *
+  * @output:
+  *    ckern_table ::
+  *       A pointer to the kern table.
+  *
+  * @return:
+  *   FreeType error code.  0~means success.
+  *
+  * @note:
+  *   After use, the application should deallocate the buffers pointed to by
+  *   `ckern_table', by calling @FT_ClassicKern_Free.  A NULL value
+  *   indicates that the table doesn't exist in the font.
+  */
+  FT_EXPORT( FT_Error )
+  FT_ClassicKern_Validate( FT_Face    face,
+                           FT_UInt    validation_flags,
+                           FT_Bytes  *ckern_table );
+
+
+ /**********************************************************************
+  *
+  * @function:
+  *    FT_ClassicKern_Free
+  *
+  * @description:
+  *    Free the buffer allocated by classic Kern validator.
+  *
+  * @input:
+  *    face ::
+  *       A handle to the input face.
+  *
+  *    table ::
+  *       The pointer to the buffer that is allocated by
+  *       @FT_ClassicKern_Validate.
+  *
+  * @note:
+  *   This function must be used to free the buffer allocated by
+  *   @FT_ClassicKern_Validate only.
+  */
+  FT_EXPORT( void )
+  FT_ClassicKern_Free( FT_Face   face,
+                       FT_Bytes  table );
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTGXVAL_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftgzip.h b/darwin-x86_64/freetype/include/freetype2/ftgzip.h
new file mode 100644
index 0000000..b3a532d
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftgzip.h
@@ -0,0 +1,148 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftgzip.h                                                               */
+/*                                                                         */
+/*    Gzip-compressed stream support.                                      */
+/*                                                                         */
+/*  Copyright 2002-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTGZIP_H__
+#define __FTGZIP_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    gzip                                                               */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    GZIP Streams                                                       */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    Using gzip-compressed font files.                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section contains the declaration of Gzip-specific functions.  */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+ /************************************************************************
+  *
+  * @function:
+  *   FT_Stream_OpenGzip
+  *
+  * @description:
+  *   Open a new stream to parse gzip-compressed font files.  This is
+  *   mainly used to support the compressed `*.pcf.gz' fonts that come
+  *   with XFree86.
+  *
+  * @input:
+  *   stream ::
+  *     The target embedding stream.
+  *
+  *   source ::
+  *     The source stream.
+  *
+  * @return:
+  *   FreeType error code.  0~means success.
+  *
+  * @note:
+  *   The source stream must be opened _before_ calling this function.
+  *
+  *   Calling the internal function `FT_Stream_Close' on the new stream will
+  *   *not* call `FT_Stream_Close' on the source stream.  None of the stream
+  *   objects will be released to the heap.
+  *
+  *   The stream implementation is very basic and resets the decompression
+  *   process each time seeking backwards is needed within the stream.
+  *
+  *   In certain builds of the library, gzip compression recognition is
+  *   automatically handled when calling @FT_New_Face or @FT_Open_Face.
+  *   This means that if no font driver is capable of handling the raw
+  *   compressed file, the library will try to open a gzipped stream from
+  *   it and re-open the face with it.
+  *
+  *   This function may return `FT_Err_Unimplemented_Feature' if your build
+  *   of FreeType was not compiled with zlib support.
+  */
+  FT_EXPORT( FT_Error )
+  FT_Stream_OpenGzip( FT_Stream  stream,
+                      FT_Stream  source );
+
+
+ /************************************************************************
+  *
+  * @function:
+  *   FT_Gzip_Uncompress
+  *
+  * @description:
+  *   Decompress a zipped input buffer into an output buffer.  This function
+  *   is modeled after zlib's `uncompress' function.
+  *
+  * @input:
+  *   memory ::
+  *     A FreeType memory handle.
+  *
+  *   input ::
+  *     The input buffer.
+  *
+  *   input_len ::
+  *     The length of the input buffer.
+  *
+  * @output:
+  *   output::
+  *     The output buffer.
+  *
+  * @inout:
+  *   output_len ::
+  *     Before calling the function, this is the the total size of the
+  *     output buffer, which must be large enough to hold the entire
+  *     uncompressed data (so the size of the uncompressed data must be
+  *     known in advance).  After calling the function, `output_len' is the
+  *     size of the used data in `output'.
+  *
+  * @return:
+  *   FreeType error code.  0~means success.
+  *
+  * @note:
+  *   This function may return `FT_Err_Unimplemented_Feature' if your build
+  *   of FreeType was not compiled with zlib support.
+  */
+  FT_EXPORT( FT_Error )
+  FT_Gzip_Uncompress( FT_Memory       memory,
+                      FT_Byte*        output,
+                      FT_ULong*       output_len,
+                      const FT_Byte*  input,
+                      FT_ULong        input_len );
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTGZIP_H__ */
+
+
+/* END */
diff --git a/darwin-x86_64/freetype/include/freetype2/ftimage.h b/darwin-x86_64/freetype/include/freetype2/ftimage.h
new file mode 100644
index 0000000..82f284c
--- /dev/null
+++ b/darwin-x86_64/freetype/include/freetype2/ftimage.h
@@ -0,0 +1,1214 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftimage.h                                                              */
+/*                                                                         */
+/*    FreeType glyph image formats and default raster interface            */
+/*    (specification).                                                     */
+/*                                                                         */
+/*  Copyright 1996-2015 by                                                 */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* Note: A `raster' is simply a scan-line converter, used to render      */
+  /*       FT_Outlines into FT_Bitmaps.                                    */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+#ifndef __FTIMAGE_H__
+#define __FTIMAGE_H__
+
+
+  /* _STANDALONE_ is from ftgrays.c */
+#ifndef _STANDALONE_
+#include <ft2build.h>
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    basic_types                                                        */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Type>                                                                */
+  /*    FT_Pos                                                             */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    The type FT_Pos is used to store vectorial coordinates.  Depending */
+  /*    on the context, these can represent distances in integer font      */
+  /*    units, or 16.16, or 26.6 fixed-point pixel coordinates.            */
+  /*                                                                       */
+  typedef signed long  FT_Pos;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_Vector                                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A simple structure used to store a 2D vector; coordinates are of   */
+  /*    the FT_Pos type.                                                   */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    x :: The horizontal coordinate.                                    */
+  /*    y :: The vertical coordinate.                                      */
+  /*                                                                       */
+  typedef struct  FT_Vector_
+  {
+    FT_Pos  x;
+    FT_Pos  y;
+
+  } FT_Vector;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_BBox                                                            */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A structure used to hold an outline's bounding box, i.e., the      */
+  /*    coordinates of its extrema in the horizontal and vertical          */
+  /*    directions.                                                        */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    xMin :: The horizontal minimum (left-most).                        */
+  /*                                                                       */
+  /*    yMin :: The vertical minimum (bottom-most).                        */
+  /*                                                                       */
+  /*    xMax :: The horizontal maximum (right-most).                       */
+  /*                                                                       */
+  /*    yMax :: The vertical maximum (top-most).                           */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The bounding box is specified with the coordinates of the lower    */
+  /*    left and the upper right corner.  In PostScript, those values are  */
+  /*    often called (llx,lly) and (urx,ury), respectively.                */
+  /*                                                                       */
+  /*    If `yMin' is negative, this value gives the glyph's descender.     */
+  /*    Otherwise, the glyph doesn't descend below the baseline.           */
+  /*    Similarly, if `ymax' is positive, this value gives the glyph's     */
+  /*    ascender.                                                          */
+  /*                                                                       */
+  /*    `xMin' gives the horizontal distance from the glyph's origin to    */
+  /*    the left edge of the glyph's bounding box.  If `xMin' is negative, */
+  /*    the glyph extends to the left of the origin.                       */
+  /*                                                                       */
+  typedef struct  FT_BBox_
+  {
+    FT_Pos  xMin, yMin;
+    FT_Pos  xMax, yMax;
+
+  } FT_BBox;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Enum>                                                                */
+  /*    FT_Pixel_Mode                                                      */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    An enumeration type used to describe the format of pixels in a     */
+  /*    given bitmap.  Note that additional formats may be added in the    */
+  /*    future.                                                            */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_PIXEL_MODE_NONE ::                                              */
+  /*      Value~0 is reserved.                                             */
+  /*                                                                       */
+  /*    FT_PIXEL_MODE_MONO ::                                              */
+  /*      A monochrome bitmap, using 1~bit per pixel.  Note that pixels    */
+  /*      are stored in most-significant order (MSB), which means that     */
+  /*      the left-most pixel in a byte has value 128.                     */
+  /*                                                                       */
+  /*    FT_PIXEL_MODE_GRAY ::                                              */
+  /*      An 8-bit bitmap, generally used to represent anti-aliased glyph  */
+  /*      images.  Each pixel is stored in one byte.  Note that the number */
+  /*      of `gray' levels is stored in the `num_grays' field of the       */
+  /*      @FT_Bitmap structure (it generally is 256).                      */
+  /*                                                                       */
+  /*    FT_PIXEL_MODE_GRAY2 ::                                             */
+  /*      A 2-bit per pixel bitmap, used to represent embedded             */
+  /*      anti-aliased bitmaps in font files according to the OpenType     */
+  /*      specification.  We haven't found a single font using this        */
+  /*      format, however.                                                 */
+  /*                                                                       */
+  /*    FT_PIXEL_MODE_GRAY4 ::                                             */
+  /*      A 4-bit per pixel bitmap, representing embedded anti-aliased     */
+  /*      bitmaps in font files according to the OpenType specification.   */
+  /*      We haven't found a single font using this format, however.       */
+  /*                                                                       */
+  /*    FT_PIXEL_MODE_LCD ::                                               */
+  /*      An 8-bit bitmap, representing RGB or BGR decimated glyph images  */
+  /*      used for display on LCD displays; the bitmap is three times      */
+  /*      wider than the original glyph image.  See also                   */
+  /*      @FT_RENDER_MODE_LCD.                                             */
+  /*                                                                       */
+  /*    FT_PIXEL_MODE_LCD_V ::                                             */
+  /*      An 8-bit bitmap, representing RGB or BGR decimated glyph images  */
+  /*      used for display on rotated LCD displays; the bitmap is three    */
+  /*      times taller than the original glyph image.  See also            */
+  /*      @FT_RENDER_MODE_LCD_V.                                           */
+  /*                                                                       */
+  /*    FT_PIXEL_MODE_BGRA ::                                              */
+  /*      An image with four 8-bit channels per pixel, representing a      */
+  /*      color image (such as emoticons) with alpha channel.  For each    */
+  /*      pixel, the format is BGRA, which means, the blue channel comes   */
+  /*      first in memory.  The color channels are pre-multiplied and in   */
+  /*      the sRGB colorspace.  For example, full red at half-translucent  */
+  /*      opacity will be represented as `00,00,80,80', not `00,00,FF,80'. */
+  /*      See also @FT_LOAD_COLOR.                                         */
+  /*                                                                       */
+  typedef enum  FT_Pixel_Mode_
+  {
+    FT_PIXEL_MODE_NONE = 0,
+    FT_PIXEL_MODE_MONO,
+    FT_PIXEL_MODE_GRAY,
+    FT_PIXEL_MODE_GRAY2,
+    FT_PIXEL_MODE_GRAY4,
+    FT_PIXEL_MODE_LCD,
+    FT_PIXEL_MODE_LCD_V,
+    FT_PIXEL_MODE_BGRA,
+
+    FT_PIXEL_MODE_MAX      /* do not remove */
+
+  } FT_Pixel_Mode;
+
+
+  /* these constants are deprecated; use the corresponding `FT_Pixel_Mode' */
+  /* values instead.                                                       */
+#define ft_pixel_mode_none   FT_PIXEL_MODE_NONE
+#define ft_pixel_mode_mono   FT_PIXEL_MODE_MONO
+#define ft_pixel_mode_grays  FT_PIXEL_MODE_GRAY
+#define ft_pixel_mode_pal2   FT_PIXEL_MODE_GRAY2
+#define ft_pixel_mode_pal4   FT_PIXEL_MODE_GRAY4
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_Bitmap                                                          */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A structure used to describe a bitmap or pixmap to the raster.     */
+  /*    Note that we now manage pixmaps of various depths through the      */
+  /*    `pixel_mode' field.                                                */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    rows         :: The number of bitmap rows.                         */
+  /*                                                                       */
+  /*    width        :: The number of pixels in bitmap row.                */
+  /*                                                                       */
+  /*    pitch        :: The pitch's absolute value is the number of bytes  */
+  /*                    taken by one bitmap row, including padding.        */
+  /*                    However, the pitch is positive when the bitmap has */
+  /*                    a `down' flow, and negative when it has an `up'    */
+  /*                    flow.  In all cases, the pitch is an offset to add */
+  /*                    to a bitmap pointer in order to go down one row.   */
+  /*                                                                       */
+  /*                    Note that `padding' means the alignment of a       */
+  /*                    bitmap to a byte border, and FreeType functions    */
+  /*                    normally align to the smallest possible integer    */
+  /*                    value.                                             */
+  /*                                                                       */
+  /*                    For the B/W rasterizer, `pitch' is always an even  */
+  /*                    number.                                            */
+  /*                                                                       */
+  /*                    To change the pitch of a bitmap (say, to make it a */
+  /*                    multiple of 4), use @FT_Bitmap_Convert.            */
+  /*                    Alternatively, you might use callback functions to */
+  /*                    directly render to the application's surface; see  */
+  /*                    the file `example2.cpp' in the tutorial for a      */
+  /*                    demonstration.                                     */
+  /*                                                                       */
+  /*    buffer       :: A typeless pointer to the bitmap buffer.  This     */
+  /*                    value should be aligned on 32-bit boundaries in    */
+  /*                    most cases.                                        */
+  /*                                                                       */
+  /*    num_grays    :: This field is only used with                       */
+  /*                    @FT_PIXEL_MODE_GRAY; it gives the number of gray   */
+  /*                    levels used in the bitmap.                         */
+  /*                                                                       */
+  /*    pixel_mode   :: The pixel mode, i.e., how pixel bits are stored.   */
+  /*                    See @FT_Pixel_Mode for possible values.            */
+  /*                                                                       */
+  /*    palette_mode :: This field is intended for paletted pixel modes;   */
+  /*                    it indicates how the palette is stored.  Not       */
+  /*                    used currently.                                    */
+  /*                                                                       */
+  /*    palette      :: A typeless pointer to the bitmap palette; this     */
+  /*                    field is intended for paletted pixel modes.  Not   */
+  /*                    used currently.                                    */
+  /*                                                                       */
+  typedef struct  FT_Bitmap_
+  {
+    unsigned int    rows;
+    unsigned int    width;
+    int             pitch;
+    unsigned char*  buffer;
+    unsigned short  num_grays;
+    unsigned char   pixel_mode;
+    unsigned char   palette_mode;
+    void*           palette;
+
+  } FT_Bitmap;
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    outline_processing                                                 */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Struct>                                                              */
+  /*    FT_Outline                                                         */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This structure is used to describe an outline to the scan-line     */
+  /*    converter.                                                         */
+  /*                                                                       */
+  /* <Fields>                                                              */
+  /*    n_contours :: The number of contours in the outline.               */
+  /*                                                                       */
+  /*    n_points   :: The number of points in the outline.                 */
+  /*                                                                       */
+  /*    points     :: A pointer to an array of `n_points' @FT_Vector       */
+  /*                  elements, giving the outline's point coordinates.    */
+  /*                                                                       */
+  /*    tags       :: A pointer to an array of `n_points' chars, giving    */
+  /*                  each outline point's type.                           */
+  /*                                                                       */
+  /*                  If bit~0 is unset, the point is `off' the curve,     */
+  /*                  i.e., a Bézier control point, while it is `on' if    */
+  /*                  set.                                                 */
+  /*                                                                       */
+  /*                  Bit~1 is meaningful for `off' points only.  If set,  */
+  /*                  it indicates a third-order Bézier arc control point; */
+  /*                  and a second-order control point if unset.           */
+  /*                                                                       */
+  /*                  If bit~2 is set, bits 5-7 contain the drop-out mode  */
+  /*                  (as defined in the OpenType specification; the value */
+  /*                  is the same as the argument to the SCANMODE          */
+  /*                  instruction).                                        */
+  /*                                                                       */
+  /*                  Bits 3 and~4 are reserved for internal purposes.     */
+  /*                                                                       */
+  /*    contours   :: An array of `n_contours' shorts, giving the end      */
+  /*                  point of each contour within the outline.  For       */
+  /*                  example, the first contour is defined by the points  */
+  /*                  `0' to `contours[0]', the second one is defined by   */
+  /*                  the points `contours[0]+1' to `contours[1]', etc.    */
+  /*                                                                       */
+  /*    flags      :: A set of bit flags used to characterize the outline  */
+  /*                  and give hints to the scan-converter and hinter on   */
+  /*                  how to convert/grid-fit it.  See @FT_OUTLINE_XXX.    */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The B/W rasterizer only checks bit~2 in the `tags' array for the   */
+  /*    first point of each contour.  The drop-out mode as given with      */
+  /*    @FT_OUTLINE_IGNORE_DROPOUTS, @FT_OUTLINE_SMART_DROPOUTS, and       */
+  /*    @FT_OUTLINE_INCLUDE_STUBS in `flags' is then overridden.           */
+  /*                                                                       */
+  typedef struct  FT_Outline_
+  {
+    short       n_contours;      /* number of contours in glyph        */
+    short       n_points;        /* number of points in the glyph      */
+
+    FT_Vector*  points;          /* the outline's points               */
+    char*       tags;            /* the points flags                   */
+    short*      contours;        /* the contour end points             */
+
+    int         flags;           /* outline masks                      */
+
+  } FT_Outline;
+
+  /* */
+
+  /* Following limits must be consistent with */
+  /* FT_Outline.{n_contours,n_points}         */
+#define FT_OUTLINE_CONTOURS_MAX  SHRT_MAX
+#define FT_OUTLINE_POINTS_MAX    SHRT_MAX
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Enum>                                                                */
+  /*    FT_OUTLINE_XXX                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A list of bit-field constants use for the flags in an outline's    */
+  /*    `flags' field.                                                     */
+  /*                                                                       */
+  /* <Values>                                                              */
+  /*    FT_OUTLINE_NONE ::                                                 */
+  /*      Value~0 is reserved.                                             */
+  /*                                                                       */
+  /*    FT_OUTLINE_OWNER ::                                                */
+  /*      If set, this flag indicates that the outline's field arrays      */
+  /*      (i.e., `points', `flags', and `contours') are `owned' by the     */
+  /*      outline object, and should thus be freed when it is destroyed.   */
+  /*                                                                       */
+  /*    FT_OUTLINE_EVEN_ODD_FILL ::                                        */
+  /*      By default, outlines are filled using the non-zero winding rule. */
+  /*      If set to 1, the outline will be filled using the even-odd fill  */
+  /*      rule (only works with the smooth rasterizer).                    */
+  /*                                                                       */
+  /*    FT_OUTLINE_REVERSE_FILL ::                                         */
+  /*      By default, outside contours of an outline are oriented in       */
+  /*      clock-wise direction, as defined in the TrueType specification.  */
+  /*      This flag is set if the outline uses the opposite direction      */
+  /*      (typically for Type~1 fonts).  This flag is ignored by the scan  */
+  /*      converter.                                                       */
+  /*                                                                       */
+  /*    FT_OUTLINE_IGNORE_DROPOUTS ::                                      */
+  /*      By default, the scan converter will try to detect drop-outs in   */
+  /*      an outline and correct the glyph bitmap to ensure consistent     */
+  /*      shape continuity.  If set, this flag hints the scan-line         */
+  /*      converter to ignore such cases.  See below for more information. */
+  /*                                                                       */
+  /*    FT_OUTLINE_SMART_DROPOUTS ::                                       */
+  /*      Select smart dropout control.  If unset, use simple dropout      */
+  /*      control.  Ignored if @FT_OUTLINE_IGNORE_DROPOUTS is set.  See    */
+  /*      below for more information.                                      */
+  /*                                                                       */
+  /*    FT_OUTLINE_INCLUDE_STUBS ::                                        */
+  /*      If set, turn pixels on for `stubs', otherwise exclude them.      */
+  /*      Ignored if @FT_OUTLINE_IGNORE_DROPOUTS is set.  See below for    */
+  /*      more information.                                                */
+  /*                                                                       */
+  /*    FT_OUTLINE_HIGH_PRECISION ::                                       */
+  /*      This flag indicates that the scan-line converter should try to   */
+  /*      convert this outline to bitmaps with the highest possible        */
+  /*      quality.  It is typically set for small character sizes.  Note   */
+  /*      that this is only a hint that might be completely ignored by a   */
+  /*      given scan-converter.                                            */
+  /*                                                                       */
+  /*    FT_OUTLINE_SINGLE_PASS ::                                          */
+  /*      This flag is set to force a given scan-converter to only use a   */
+  /*      single pass over the outline to render a bitmap glyph image.     */
+  /*      Normally, it is set for very large character sizes.  It is only  */
+  /*      a hint that might be completely ignored by a given               */
+  /*      scan-converter.                                                  */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The flags @FT_OUTLINE_IGNORE_DROPOUTS, @FT_OUTLINE_SMART_DROPOUTS, */
+  /*    and @FT_OUTLINE_INCLUDE_STUBS are ignored by the smooth            */
+  /*    rasterizer.                                                        */
+  /*                                                                       */
+  /*    There exists a second mechanism to pass the drop-out mode to the   */
+  /*    B/W rasterizer; see the `tags' field in @FT_Outline.               */
+  /*                                                                       */
+  /*    Please refer to the description of the `SCANTYPE' instruction in   */
+  /*    the OpenType specification (in file `ttinst1.doc') how simple      */
+  /*    drop-outs, smart drop-outs, and stubs are defined.                 */
+  /*                                                                       */
+#define FT_OUTLINE_NONE             0x0
+#define FT_OUTLINE_OWNER            0x1
+#define FT_OUTLINE_EVEN_ODD_FILL    0x2
+#define FT_OUTLINE_REVERSE_FILL     0x4
+#define FT_OUTLINE_IGNORE_DROPOUTS  0x8
+#define FT_OUTLINE_SMART_DROPOUTS   0x10
+#define FT_OUTLINE_INCLUDE_STUBS    0x20
+
+#define FT_OUTLINE_HIGH_PRECISION   0x100
+#define FT_OUTLINE_SINGLE_PASS      0x200
+
+
+  /* these constants are deprecated; use the corresponding */
+  /* `FT_OUTLINE_XXX' values instead                       */
+#define ft_outline_none             FT_OUTLINE_NONE
+#define ft_outline_owner            FT_OUTLINE_OWNER
+#define ft_outline_even_odd_fill    FT_OUTLINE_EVEN_ODD_FILL
+#define ft_outline_reverse_fill     FT_OUTLINE_REVERSE_FILL
+#define ft_outline_ignore_dropouts  FT_OUTLINE_IGNORE_DROPOUTS
+#define ft_outline_high_precision   FT_OUTLINE_HIGH_PRECISION
+#define ft_outline_single_pass      FT_OUTLINE_SINGLE_PASS
+
+  /* */
+
+#define FT_CURVE_TAG( flag )  ( flag & 3 )
+
+#define FT_CURVE_TAG_ON            1
+#define FT_CURVE_TAG_CONIC         0
+#define FT_CURVE_TAG_CUBIC         2
+
+#define FT_CURVE_TAG_HAS_SCANMODE  4
+
+#define FT_CURVE_TAG_TOUCH_X       8  /* reserved for the TrueType hinter */
+#define FT_CURVE_TAG_TOUCH_Y      16  /* reserved for the TrueType hinter */
+
+#define FT_CURVE_TAG_TOUCH_BOTH    ( FT_CURVE_TAG_TOUCH_X | \
+                                     FT_CURVE_TAG_TOUCH_Y )
+
+#define FT_Curve_Tag_On       FT_CURVE_TAG_ON
+#define FT_Curve_Tag_Conic    FT_CURVE_TAG_CONIC
+#define FT_Curve_Tag_Cubic    FT_CURVE_TAG_CUBIC
+#define FT_Curve_Tag_Touch_X  FT_CURVE_TAG_TOUCH_X
+#define FT_Curve_Tag_Touch_Y  FT_CURVE_TAG_TOUCH_Y
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <FuncType>                                                            */
+  /*    FT_Outline_MoveToFunc                                              */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    A function pointer type used to describe the signature of a `move  */
+  /*    to' function during outline walking/decomposition.                 */
+  /*                                                                       */
+  /*    A `move to' is emitted to start a new contour in an outline.       */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    to   :: A pointer to the target point of the `move to'.            */
+  /*                                                                       */
+  /*    user :: A typeless pointer, which is passed from the caller of the */
+  /*            decomposition function.                                    */
+  /*                                                                       */