#ifndef foodefhfoo
#define foodefhfoo

/* $Id: def.h 2067 2007-11-21 01:30:40Z lennart $ */

/***
  This file is part of PulseAudio.

  Copyright 2004-2006 Lennart Poettering
  Copyright 2006 Pierre Ossman <ossman@cendio.se> for Cendio AB

  PulseAudio is free software; you can redistribute it and/or modify
  it under the terms of the GNU Lesser General Public License as
  published by the Free Software Foundation; either version 2.1 of the
  License, or (at your option) any later version.

  PulseAudio is distributed in the hope that it will be useful, but
  WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with PulseAudio; if not, write to the Free Software
  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  USA.
***/

#include <inttypes.h>
#include <sys/time.h>
#include <time.h>

#include <pulse/cdecl.h>
#include <pulse/sample.h>

/** \file
 * Global definitions */

PA_C_DECL_BEGIN

/** The state of a connection context */
typedef enum pa_context_state {
    PA_CONTEXT_UNCONNECTED,    /**< The context hasn't been connected yet */
    PA_CONTEXT_CONNECTING,     /**< A connection is being established */
    PA_CONTEXT_AUTHORIZING,    /**< The client is authorizing itself to the daemon */
    PA_CONTEXT_SETTING_NAME,   /**< The client is passing its application name to the daemon */
    PA_CONTEXT_READY,          /**< The connection is established, the context is ready to execute operations */
    PA_CONTEXT_FAILED,         /**< The connection failed or was disconnected */
    PA_CONTEXT_TERMINATED      /**< The connection was terminated cleanly */
} pa_context_state_t;

/** The state of a stream */
typedef enum pa_stream_state {
    PA_STREAM_UNCONNECTED, /**< The stream is not yet connected to any sink or source */
    PA_STREAM_CREATING,     /**< The stream is being created */
    PA_STREAM_READY,        /**< The stream is established, you may pass audio data to it now */
    PA_STREAM_FAILED,       /**< An error occured that made the stream invalid */
    PA_STREAM_TERMINATED    /**< The stream has been terminated cleanly */
} pa_stream_state_t;

/** The state of an operation */
typedef enum pa_operation_state {
    PA_OPERATION_RUNNING,      /**< The operation is still running */
    PA_OPERATION_DONE,         /**< The operation has been completed */
    PA_OPERATION_CANCELED      /**< The operation has been canceled */
} pa_operation_state_t;

/** An invalid index */
#define PA_INVALID_INDEX ((uint32_t) -1)

/** Some special flags for contexts. \since 0.8 */
typedef enum pa_context_flags {
    PA_CONTEXT_NOAUTOSPAWN = 1 /**< Disabled autospawning of the PulseAudio daemon if required */
} pa_context_flags_t;

/** The direction of a pa_stream object */
typedef enum pa_stream_direction {
    PA_STREAM_NODIRECTION,   /**< Invalid direction */
    PA_STREAM_PLAYBACK,      /**< Playback stream */
    PA_STREAM_RECORD,        /**< Record stream */
    PA_STREAM_UPLOAD         /**< Sample upload stream */
} pa_stream_direction_t;

/** Some special flags for stream connections. \since 0.6 */
typedef enum pa_stream_flags {
    PA_STREAM_START_CORKED = 1,       /**< Create the stream corked, requiring an explicit pa_stream_cork() call to uncork it. */
    PA_STREAM_INTERPOLATE_TIMING = 2, /**< Interpolate the latency for
                                       * this stream. When enabled,
                                       * pa_stream_get_latency() and
                                       * pa_stream_get_time() will try
                                       * to estimate the current
                                       * record/playback time based on
                                       * the local time that passed
                                       * since the last timing info
                                       * update.  Using this option
                                       * has the advantage of not
                                       * requiring a whole roundtrip
                                       * when the current
                                       * playback/recording time is
                                       * needed. Consider using this
                                       * option when requesting
                                       * latency information
                                       * frequently. This is
                                       * especially useful on long
                                       * latency network
                                       * connections. It makes a lot
                                       * of sense to combine this
                                       * option with
                                       * PA_STREAM_AUTO_TIMING_UPDATE. */
    PA_STREAM_NOT_MONOTONOUS = 4,    /**< Don't force the time to
                                      * increase monotonically. If
                                      * this option is enabled,
                                      * pa_stream_get_time() will not
                                      * necessarily return always
                                      * monotonically increasing time
                                      * values on each call. This may
                                      * confuse applications which
                                      * cannot deal with time going
                                      * 'backwards', but has the
                                      * advantage that bad transport
                                      * latency estimations that
                                      * caused the time to to jump
                                      * ahead can be corrected
                                      * quickly, without the need to
                                      * wait. */
    PA_STREAM_AUTO_TIMING_UPDATE = 8, /**< If set timing update requests
                                       * are issued periodically
                                       * automatically. Combined with
                                       * PA_STREAM_INTERPOLATE_TIMING
                                       * you will be able to query the
                                       * current time and latency with
                                       * pa_stream_get_time() and
                                       * pa_stream_get_latency() at
                                       * all times without a packet
                                       * round trip.*/
    PA_STREAM_NO_REMAP_CHANNELS = 16, /**< Don't remap channels by
                                       * their name, instead map them
                                       * simply by their
                                       * index. Implies
                                       * PA_STREAM_NO_REMIX_CHANNELS. Only
                                       * supported when the server is
                                       * at least PA 0.9.8. It is
                                       * ignored on older
                                       * servers.\since 0.9.8 */
    PA_STREAM_NO_REMIX_CHANNELS = 32, /**< When remapping channels by
                                       * name, don't upmix or downmix
                                       * them to related
                                       * channels. Copy them into
                                       * matching channels of the
                                       * device 1:1. Only supported
                                       * when the server is at least
                                       * PA 0.9.8. It is ignored on
                                       * older servers. \since
                                       * 0.9.8 */
    PA_STREAM_FIX_FORMAT = 64, /**< Use the sample format of the
                                * sink/device this stream is being
                                * connected to, and possibly ignore
                                * the format the sample spec contains
                                * -- but you still have to pass a
                                * valid value in it as a hint to
                                * PulseAudio what would suit your
                                * stream best. If this is used you
                                * should query the used sample format
                                * after creating the stream by using
                                * pa_stream_get_sample_spec(). Also,
                                * if you specified manual buffer
                                * metrics it is recommended to update
                                * them with
                                * pa_stream_set_buffer_attr() to
                                * compensate for the changed frame
                                * sizes. Only supported when the
                                * server is at least PA 0.9.8. It is
                                * ignored on older servers. \since
                                * 0.9.8 */

    PA_STREAM_FIX_RATE = 128, /**< Use the sample rate of the sink,
                               * and possibly ignore the rate the
                               * sample spec contains. Usage similar
                               * to PA_STREAM_FIX_FORMAT.Only
                               * supported when the server is at least
                               * PA 0.9.8. It is ignored on older
                               * servers. \since 0.9.8 */

    PA_STREAM_FIX_CHANNELS = 256, /**< Use the number of channels and
                               * the channel map of the sink, and
                               * possibly ignore the number of
                               * channels and the map the sample spec
                               * and the passed channel map
                               * contains. Usage similar to
                               * PA_STREAM_FIX_FORMAT. Only supported
                               * when the server is at least PA
                               * 0.9.8. It is ignored on older
                               * servers. \since 0.9.8 */
    PA_STREAM_DONT_MOVE = 512, /**< Don't allow moving of this stream to
                              * another sink/device. Useful if you use
                              * any of the PA_STREAM_FIX_ flags and
                              * want to make sure that resampling
                              * never takes place -- which might
                              * happen if the stream is moved to
                              * another sink/source whith a different
                              * sample spec/channel map. Only
                              * supported when the server is at least
                              * PA 0.9.8. It is ignored on older
                              * servers. \since 0.9.8 */
    PA_STREAM_VARIABLE_RATE = 1024, /**< Allow dynamic changing of the
                                     * sampling rate during playback
                                     * with
                                     * pa_stream_update_sample_rate(). Only
                                     * supported when the server is at
                                     * least PA 0.9.8. It is ignored
                                     * on older servers. \since
                                     * 0.9.8 */
} pa_stream_flags_t;

/** Playback and record buffer metrics */
typedef struct pa_buffer_attr {
    uint32_t maxlength;      /**< Maximum length of the buffer */
    uint32_t tlength;        /**< Playback only: target length of the buffer. The server tries to assure that at least tlength bytes are always available in the buffer */
    uint32_t prebuf;         /**< Playback only: pre-buffering. The server does not start with playback before at least prebug bytes are available in the buffer */
    uint32_t minreq;         /**< Playback only: minimum request. The server does not request less than minreq bytes from the client, instead waints until the buffer is free enough to request more bytes at once */
    uint32_t fragsize;       /**< Recording only: fragment size. The server sends data in blocks of fragsize bytes size. Large values deminish interactivity with other operations on the connection context but decrease control overhead. */
} pa_buffer_attr;

/** Error values as used by pa_context_errno(). Use pa_strerror() to convert these values to human readable strings */
enum {
    PA_OK = 0,                     /**< No error */
    PA_ERR_ACCESS,                 /**< Access failure */
    PA_ERR_COMMAND,                /**< Unknown command */
    PA_ERR_INVALID,                /**< Invalid argument */
    PA_ERR_EXIST,                  /**< Entity exists */
    PA_ERR_NOENTITY,               /**< No such entity */
    PA_ERR_CONNECTIONREFUSED,      /**< Connection refused */
    PA_ERR_PROTOCOL,               /**< Protocol error */
    PA_ERR_TIMEOUT,                /**< Timeout */
    PA_ERR_AUTHKEY,                /**< No authorization key */
    PA_ERR_INTERNAL,               /**< Internal error */
    PA_ERR_CONNECTIONTERMINATED,   /**< Connection terminated */
    PA_ERR_KILLED,                 /**< Entity killed */
    PA_ERR_INVALIDSERVER,          /**< Invalid server */
    PA_ERR_MODINITFAILED,          /**< Module initialization failed */
    PA_ERR_BADSTATE,               /**< Bad state */
    PA_ERR_NODATA,                 /**< No data */
    PA_ERR_VERSION,                /**< Incompatible protocol version \since 0.8 */
    PA_ERR_TOOLARGE,               /**< Data too large \since 0.8.1 */
    PA_ERR_NOTSUPPORTED,           /**< Operation not supported \since 0.9.5 */
    PA_ERR_MAX                     /**< Not really an error but the first invalid error code */
};

/** Subscription event mask, as used by pa_context_subscribe() */
typedef enum pa_subscription_mask {
    PA_SUBSCRIPTION_MASK_NULL = 0,               /**< No events */
    PA_SUBSCRIPTION_MASK_SINK = 1,               /**< Sink events */
    PA_SUBSCRIPTION_MASK_SOURCE = 2,             /**< Source events */
    PA_SUBSCRIPTION_MASK_SINK_INPUT = 4,         /**< Sink input events */
    PA_SUBSCRIPTION_MASK_SOURCE_OUTPUT = 8,      /**< Source output events */
    PA_SUBSCRIPTION_MASK_MODULE = 16,            /**< Module events */
    PA_SUBSCRIPTION_MASK_CLIENT = 32,            /**< Client events */
    PA_SUBSCRIPTION_MASK_SAMPLE_CACHE = 64,      /**< Sample cache events */
    PA_SUBSCRIPTION_MASK_SERVER = 128,           /**< Other global server changes. \since 0.4 */
    PA_SUBSCRIPTION_MASK_AUTOLOAD = 256,         /**< Autoload table events. \since 0.5 */
    PA_SUBSCRIPTION_MASK_ALL = 511               /**< Catch all events \since 0.8 */
} pa_subscription_mask_t;

/** Subscription event types, as used by pa_context_subscribe() */
typedef enum pa_subscription_event_type {
    PA_SUBSCRIPTION_EVENT_SINK = 0,           /**< Event type: Sink */
    PA_SUBSCRIPTION_EVENT_SOURCE = 1,         /**< Event type: Source */
    PA_SUBSCRIPTION_EVENT_SINK_INPUT = 2,     /**< Event type: Sink input */
    PA_SUBSCRIPTION_EVENT_SOURCE_OUTPUT = 3,  /**< Event type: Source output */
    PA_SUBSCRIPTION_EVENT_MODULE = 4,         /**< Event type: Module */
    PA_SUBSCRIPTION_EVENT_CLIENT = 5,         /**< Event type: Client */
    PA_SUBSCRIPTION_EVENT_SAMPLE_CACHE = 6,   /**< Event type: Sample cache item */
    PA_SUBSCRIPTION_EVENT_SERVER = 7,         /**< Event type: Global server change, only occuring with PA_SUBSCRIPTION_EVENT_CHANGE. \since 0.4  */
    PA_SUBSCRIPTION_EVENT_AUTOLOAD = 8,       /**< Event type: Autoload table changes. \since 0.5 */
    PA_SUBSCRIPTION_EVENT_FACILITY_MASK = 15, /**< A mask to extract the event type from an event value */

    PA_SUBSCRIPTION_EVENT_NEW = 0,            /**< A new object was created */
    PA_SUBSCRIPTION_EVENT_CHANGE = 16,        /**< A property of the object was modified */
    PA_SUBSCRIPTION_EVENT_REMOVE = 32,        /**< An object was removed */
    PA_SUBSCRIPTION_EVENT_TYPE_MASK = 16+32   /**< A mask to extract the event operation from an event value */
} pa_subscription_event_type_t;

/** Return one if an event type t matches an event mask bitfield */
#define pa_subscription_match_flags(m, t) (!!((m) & (1 << ((t) & PA_SUBSCRIPTION_EVENT_FACILITY_MASK))))

/** A structure for all kinds of timing information of a stream. See
 * pa_stream_update_timing_info() and pa_stream_get_timing_info(). The
 * total output latency a sample that is written with
 * pa_stream_write() takes to be played may be estimated by
 * sink_usec+buffer_usec+transport_usec. (where buffer_usec is defined
 * as pa_bytes_to_usec(write_index-read_index)) The output buffer
 * which buffer_usec relates to may be manipulated freely (with
 * pa_stream_write()'s seek argument, pa_stream_flush() and friends),
 * the buffers sink_usec and source_usec relate to are first-in
 * first-out (FIFO) buffers which cannot be flushed or manipulated in
 * any way. The total input latency a sample that is recorded takes to
 * be delivered to the application is:
 * source_usec+buffer_usec+transport_usec-sink_usec. (Take care of
 * sign issues!) When connected to a monitor source sink_usec contains
 * the latency of the owning sink. The two latency estimations
 * described here are implemented in pa_stream_get_latency().*/
typedef struct pa_timing_info {
    struct timeval timestamp; /**< The time when this timing info structure was current */
    int synchronized_clocks;  /**< Non-zero if the local and the
                               * remote machine have synchronized
                               * clocks. If synchronized clocks are
                               * detected transport_usec becomes much
                               * more reliable. However, the code that
                               * detects synchronized clocks is very
                               * limited und unreliable itself. \since
                               * 0.5 */

    pa_usec_t sink_usec;      /**< Time in usecs a sample takes to be played on the sink. For playback streams and record streams connected to a monitor source. */
    pa_usec_t source_usec;    /**< Time in usecs a sample takes from being recorded to being delivered to the application. Only for record streams. \since 0.5*/
    pa_usec_t transport_usec; /**< Estimated time in usecs a sample takes to be transferred to/from the daemon. For both playback and record streams. \since 0.5 */

    int playing;              /**< Non-zero when the stream is currently playing. Only for playback streams. */

    int write_index_corrupt;  /**< Non-zero if write_index is not
                               * up-to-date because a local write
                               * command that corrupted it has been
                               * issued in the time since this latency
                               * info was current . Only write
                               * commands with SEEK_RELATIVE_ON_READ
                               * and SEEK_RELATIVE_END can corrupt
                               * write_index. \since 0.8 */
    int64_t write_index;      /**< Current write index into the
                               * playback buffer in bytes. Think twice before
                               * using this for seeking purposes: it
                               * might be out of date a the time you
                               * want to use it. Consider using
                               * PA_SEEK_RELATIVE instead. \since
                               * 0.8 */

    int read_index_corrupt;   /**< Non-zero if read_index is not
                               * up-to-date because a local pause or
                               * flush request that corrupted it has
                               * been issued in the time since this
                               * latency info was current. \since 0.8  */

    int64_t read_index;       /**< Current read index into the
                               * playback buffer in bytes. Think twice before
                               * using this for seeking purposes: it
                               * might be out of date a the time you
                               * want to use it. Consider using
                               * PA_SEEK_RELATIVE_ON_READ
                               * instead. \since 0.8 */
} pa_timing_info;

/** A structure for the spawn api. This may be used to integrate auto
 * spawned daemons into your application. For more information see
 * pa_context_connect(). When spawning a new child process the
 * waitpid() is used on the child's PID. The spawn routine will not
 * block or ignore SIGCHLD signals, since this cannot be done in a
 * thread compatible way. You might have to do this in
 * prefork/postfork. \since 0.4 */
typedef struct pa_spawn_api {
    void (*prefork)(void);     /**< Is called just before the fork in the parent process. May be NULL. */
    void (*postfork)(void);    /**< Is called immediately after the fork in the parent process. May be NULL.*/
    void (*atfork)(void);      /**< Is called immediately after the
                                * fork in the child process. May be
                                * NULL. It is not safe to close all
                                * file descriptors in this function
                                * unconditionally, since a UNIX socket
                                * (created using socketpair()) is
                                * passed to the new process. */
} pa_spawn_api;

/** Seek type for pa_stream_write(). \since 0.8*/
typedef enum pa_seek_mode {
    PA_SEEK_RELATIVE = 0,           /**< Seek relatively to the write index */
    PA_SEEK_ABSOLUTE = 1,           /**< Seek relatively to the start of the buffer queue */
    PA_SEEK_RELATIVE_ON_READ = 2,   /**< Seek relatively to the read index.  */
    PA_SEEK_RELATIVE_END = 3        /**< Seek relatively to the current end of the buffer queue. */
} pa_seek_mode_t;

/** Special sink flags. \since 0.8  */
typedef enum pa_sink_flags {
    PA_SINK_HW_VOLUME_CTRL = 1,   /**< Supports hardware volume control */
    PA_SINK_LATENCY = 2,          /**< Supports latency querying */
    PA_SINK_HARDWARE = 4,         /**< Is a hardware sink of some kind, in contrast to "virtual"/software sinks \since 0.9.3 */
    PA_SINK_NETWORK = 8           /**< Is a networked sink of some kind. \since 0.9.7 */
} pa_sink_flags_t;

/** Special source flags. \since 0.8  */
typedef enum pa_source_flags {
    PA_SOURCE_HW_VOLUME_CTRL = 1,  /**< Supports hardware volume control */
    PA_SOURCE_LATENCY = 2,         /**< Supports latency querying */
    PA_SOURCE_HARDWARE = 4,        /**< Is a hardware source of some kind, in contrast to "virtual"/software source \since 0.9.3 */
    PA_SOURCE_NETWORK = 8          /**< Is a networked sink of some kind. \since 0.9.7 */
} pa_source_flags_t;

/** A generic free() like callback prototype */
typedef void (*pa_free_cb_t)(void *p);

PA_C_DECL_END

#endif