blob: 93793f5f13f17f8602acaa3a263d1d1b9bbfb105 [file] [log] [blame]
/* Script for ld -Ur: link w/out relocation, do create constructors */
OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips",
"elf64-tradlittlemips")
OUTPUT_ARCH(mips)
/* For some reason, the Solaris linker makes bad executables
if gld -r is used and the intermediate file has sections starting
at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
bug. But for now assigning the zero vmas works. */
SECTIONS
{
/* Read-only sections, merged into text segment: */
.MIPS.options : { *(.MIPS.options) }
.note.gnu.build-id : { *(.note.gnu.build-id) }
.dynamic 0 : { *(.dynamic) }
.hash 0 : { *(.hash) }
.gnu.hash 0 : { *(.gnu.hash) }
.dynsym 0 : { *(.dynsym) }
.dynstr 0 : { *(.dynstr) }
.gnu.version 0 : { *(.gnu.version) }
.gnu.version_d 0: { *(.gnu.version_d) }
.gnu.version_r 0: { *(.gnu.version_r) }
.rel.init 0 : { *(.rel.init) }
.rela.init 0 : { *(.rela.init) }
.rel.text 0 : { *(.rel.text) }
.rela.text 0 : { *(.rela.text) }
.rel.fini 0 : { *(.rel.fini) }
.rela.fini 0 : { *(.rela.fini) }
.rel.rodata 0 : { *(.rel.rodata) }
.rela.rodata 0 : { *(.rela.rodata) }
.rel.data.rel.ro 0 : { *(.rel.data.rel.ro) }
.rela.data.rel.ro 0 : { *(.rela.data.rel.ro) }
.rel.data 0 : { *(.rel.data) }
.rela.data 0 : { *(.rela.data) }
.rel.tdata 0 : { *(.rel.tdata) }
.rela.tdata 0 : { *(.rela.tdata) }
.rel.tbss 0 : { *(.rel.tbss) }
.rela.tbss 0 : { *(.rela.tbss) }
.rel.ctors 0 : { *(.rel.ctors) }
.rela.ctors 0 : { *(.rela.ctors) }
.rel.dtors 0 : { *(.rel.dtors) }
.rela.dtors 0 : { *(.rela.dtors) }
.rel.got 0 : { *(.rel.got) }
.rela.got 0 : { *(.rela.got) }
.rel.dyn 0 : { *(.rel.dyn) }
.rel.sdata 0 : { *(.rel.sdata) }
.rela.sdata 0 : { *(.rela.sdata) }
.rel.sbss 0 : { *(.rel.sbss) }
.rela.sbss 0 : { *(.rela.sbss) }
.rel.sdata2 0 : { *(.rel.sdata2) }
.rela.sdata2 0 : { *(.rela.sdata2) }
.rel.sbss2 0 : { *(.rel.sbss2) }
.rela.sbss2 0 : { *(.rela.sbss2) }
.rel.bss 0 : { *(.rel.bss) }
.rela.bss 0 : { *(.rela.bss) }
.rel.iplt 0 :
{
*(.rel.iplt)
}
.rela.iplt 0 :
{
*(.rela.iplt)
}
.rel.plt 0 :
{
*(.rel.plt)
}
.rela.plt 0 :
{
*(.rela.plt)
}
.init 0 :
{
KEEP (*(SORT_NONE(.init)))
}
.plt 0 : { *(.plt) }
.iplt 0 : { *(.iplt) }
.text 0 :
{
*(.text .stub)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
}
.fini 0 :
{
KEEP (*(SORT_NONE(.fini)))
}
.rodata 0 : { *(.rodata) }
.rodata1 0 : { *(.rodata1) }
.sdata2 0 :
{
*(.sdata2)
}
.sbss2 0 : { *(.sbss2) }
.eh_frame_hdr : { *(.eh_frame_hdr) }
.eh_frame 0 : ONLY_IF_RO { KEEP (*(.eh_frame)) }
.gcc_except_table 0 : ONLY_IF_RO { *(.gcc_except_table
.gcc_except_table.*) }
/* These sections are generated by the Sun/Oracle C++ compiler. */
.exception_ranges 0 : ONLY_IF_RO { *(.exception_ranges
.exception_ranges*) }
/* Adjust the address for the data segment. We want to align at exactly
a page boundary to make life easier for apriori. */
/* Exception handling */
.eh_frame 0 : ONLY_IF_RW { KEEP (*(.eh_frame)) }
.gcc_except_table 0 : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
.exception_ranges 0 : ONLY_IF_RW { *(.exception_ranges .exception_ranges*) }
/* Thread Local Storage sections */
.tdata 0 : { *(.tdata) }
.tbss 0 : { *(.tbss) }
/* Ensure the __preinit_array_start label is properly aligned. We
could instead move the label definition inside the section, but
the linker would then create the section even if it turns out to
be empty, which isn't pretty. */
. = ALIGN(32 / 8);
.preinit_array 0 :
{
KEEP (*(.preinit_array))
}
.jcr 0 : { KEEP (*(.jcr)) }
.data 0 :
{
*(.data)
SORT(CONSTRUCTORS)
}
.data1 0 : { *(.data1) }
.got.plt 0 : { *(.got.plt) }
.got 0 : { *(.got) }
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
.sdata 0 :
{
*(.sdata)
}
.lit8 0 : { *(.lit8) }
.lit4 0 : { *(.lit4) }
.srdata 0 : { *(.srdata) }
.sbss 0 :
{
*(.dynsbss)
*(.sbss)
*(.scommon)
}
.bss 0 :
{
*(.dynbss)
*(.bss)
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
/* DWARF 3 */
.debug_pubtypes 0 : { *(.debug_pubtypes) }
.debug_ranges 0 : { *(.debug_ranges) }
/* DWARF Extension. */
.debug_macro 0 : { *(.debug_macro) }
.gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
}