/*
 * Copyright (C) 2016 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.hardware;

import android.annotation.IntDef;

import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;

/**
 * This class represents a {@link android.hardware.Sensor Sensor} additional information frame,
 * which is reported through listener callback {@link
 * android.hardware.SensorEventCallback#onSensorAdditionalInfo onSensorAdditionalInfo}.
 *
 * @see SensorManager
 * @see SensorEventCallback
 * @see Sensor
 *
 */

public class SensorAdditionalInfo {

    /**
     * The sensor that generated this event. See
     * {@link android.hardware.SensorManager SensorManager} for details.
     */
    public final Sensor sensor;

    /**
     * Type of this additional info frame.
     */
    public final int type;

    /**
     * Sequence number of frame for a certain type.
     */
    public final int serial;

    /**
     * Additional info payload data represented in float values. Depending on the type of
     * information, this may be null.
     */
    public final float[] floatValues;

    /**
     * Additional info payload data represented in int values. Depending on the type of information,
     * this may be null.
     */
    public final int[] intValues;

    /**
     * Typical values of additional infomation type. The set of values is subject to extension in
     * newer versions and vendors have the freedom of define their own custom values.
     *
     * @hide
     */
    @IntDef(prefix = { "TYPE_" }, value = {
            TYPE_FRAME_BEGIN,
            TYPE_FRAME_END,
            TYPE_UNTRACKED_DELAY,
            TYPE_INTERNAL_TEMPERATURE,
            TYPE_VEC3_CALIBRATION,
            TYPE_SENSOR_PLACEMENT,
            TYPE_SAMPLING
    })
    @Retention(RetentionPolicy.SOURCE)
    public @interface AdditionalInfoType {}

    /**
     * Mark the beginning of a set of additional info frames.
     */
    public static final int TYPE_FRAME_BEGIN = 0;

    /**
     * Mark the end of a set of additional info frames.
     */
    public static final int TYPE_FRAME_END = 1;

    /**
     * Untracked delay. Delays that are introduced by data processing, such as filtering, which is
     * not taken into account by sensor timestamps.
     *
     * Payload:
     *     floatValues[0]: delay estimation in seconds
     *     floatValues[1]: delay estimation standard deviation
     */
    public static final int TYPE_UNTRACKED_DELAY = 0x10000;

    /**
     * Internal temperature. Sensor hardware device internal temperature.
     *
     * Payload:
     *     floatValues[0]: internal temperature in Celsius.
     */
    public static final int TYPE_INTERNAL_TEMPERATURE = 0x10001;

    /**
     * Vector calibration parameter. Calibration applied to a sensor with 3 elements vector output,
     * such as accelerometer, gyro, etc.
     *
     * Payload:
     *     floatValues[0..11]: First 3 rows of a homogeneous matrix in row major order that captures
     *     any linear transformation, including rotation, scaling, shear, shift.
     */
    public static final int TYPE_VEC3_CALIBRATION = 0x10002;

    /**
     * Sensor placement.
     *
     * Provides the orientation and location of the sensor element in terms of the
     * Android coordinate system. This data is given as a 3x4 matrix consisting of a 3x3 rotation
     * matrix (R) concatenated with a 3x1 location vector (t). The rotation matrix provides the
     * orientation of the Android device coordinate frame relative to the local coordinate frame of
     * the sensor. Note that assuming the axes conventions of the sensor are the same as Android,
     * this is the inverse of the matrix applied to raw samples read from the sensor to convert them
     * into the Android representation. The location vector represents the translation from the
     * origin of the Android sensor coordinate system to the geometric center of the sensor,
     * specified in millimeters (mm).
     * <p>
     * <b>Payload</b>:
     *     <code>floatValues[0..11]</code>: 3x4 matrix in row major order [R; t]
     * </p>
     * <p>
     * <b>Example</b>:
     *     This raw buffer: <code>{0, 1, 0, 0, -1, 0, 0, 10, 0, 0, 1, -2.5}</code><br>
     *     Corresponds to this 3x4 matrix:
     *     <table>
     *      <thead>
     *       <tr><td colspan="3">Orientation</td><td>Location</tr>
     *      </thead>
     *      <tbody>
     *       <tr><td>0</td><td>1</td><td>0</td><td>0</td></tr>
     *       <tr><td>-1</td><td>0</td><td>0</td><td>10</td></tr>
     *       <tr><td>0</td><td>0</td><td>1</td><td>-2.5</td></tr>
     *      </tbody>
     *     </table>
     *     The sensor is oriented such that:
     *     <ul>
     *        <li>The device X axis corresponds to the sensor's local -Y axis
     *        <li>The device Y axis corresponds to the sensor's local X axis
     *        <li>The device Z axis and sensor's local Z axis are equivalent
     *     </ul>
     *     In other words, if viewing the origin of the Android coordinate system from the positive
     *     Z direction, the device coordinate frame is to be rotated 90° counter-clockwise about the
     *     Z axis to align with the sensor's local coordinate frame. Equivalently, a vector in the
     *     Android coordinate frame may be multiplied with R to rotate it 90° clockwise (270°
     *     counter-clockwise), yielding its representation in the sensor's coordinate frame.
     *     Relative to the origin of the Android coordinate system, the physical center of the
     *     sensor is located 10mm in the positive Y direction, and 2.5mm in the negative Z
     *     direction.
     * </p>
     */
    public static final int TYPE_SENSOR_PLACEMENT = 0x10003;

    /**
     * Sampling parameter. Describes the raw sample period and estimated jitter of sample time in
     * terms of standard deviation.
     *
     * Payload:
     *     floatValues[0]: raw sample period in seconds.
     *     floatValues[1]: standard deviation of sampling period.
     */
    public static final int TYPE_SAMPLING = 0x10004;

    /**
     * Local geo-magnetic Field.
     *
     * Additional into to sensor hardware.  Local geomagnetic field information based on
     * device geo location. This type is primarily for for magnetic field calibration and rotation
     * vector sensor fusion.
     *
     * float[3]: strength (uT), declination and inclination angle (rad).
     * @hide
     */
    public static final int TYPE_LOCAL_GEOMAGNETIC_FIELD = 0x30000;

    /**
     * Local gravity acceleration strength.
     *
     * Additional info to sensor hardware for accelerometer calibration.
     *
     * float: gravitational acceleration norm in m/s^2.
     * @hide
     */
    public static final int TYPE_LOCAL_GRAVITY = 0x30001;

    /**
     * Device dock state.
     *
     * Additional info to sensor hardware indicating dock states of device.
     *
     * int32_t: dock state following definition of {@link android.content.Intent#EXTRA_DOCK_STATE}.
     *          Undefined values are ignored.
     * @hide
     */
    public static final int TYPE_DOCK_STATE = 0x30002;

    /**
     * High performance mode.
     *
     * Additional info to sensor hardware. Device is able to use up more power and take more
     * resources to improve throughput and latency in high performance mode. One possible use case
     * is virtual reality, when sensor latency need to be carefully controlled.
     *
     * int32_t: 1 or 0, denoting device is in or out of high performance mode, respectively.
     *          Other values are ignored.
     * @hide
     */
    public static final int TYPE_HIGH_PERFORMANCE_MODE = 0x30003;

    /**
     * Magnetic field calibration hint.
     *
     * Additional info to sensor hardware. Device is notified when manually triggered magnetic field
     * calibration procedure is started or stopped. The calibration procedure is assumed timed out
     * after 1 minute from start, even if an explicit stop is not received.
     *
     * int32_t: 1 for calibration start, 0 for stop, other values are ignored.
     * @hide
     */
    public static final int TYPE_MAGNETIC_FIELD_CALIBRATION = 0x30004;

    /**
     * Custom sensor info: array of float values interpreted by sensor based on the type
     * Any type between TYPE_CUSTOM_INFO <= info_type < TYPE_DEBUG_INFO may be
     * used to send custom sensor info.
     * @hide
     */
    public static final int TYPE_CUSTOM_INFO = 0x10000000;
    /** @hide */
    public static final int TYPE_DEBUG_INFO  = 0x40000000;

    SensorAdditionalInfo(
            Sensor aSensor, int aType, int aSerial, int[] aIntValues, float[] aFloatValues) {
        sensor = aSensor;
        type = aType;
        serial = aSerial;
        intValues = aIntValues;
        floatValues = aFloatValues;
    }

    /** @hide */
    public static SensorAdditionalInfo createLocalGeomagneticField(
            float strength, float declination, float inclination) {
        if (strength < 10 || strength > 100 // much beyond extreme values on earth
                || declination < 0 || declination > Math.PI
                || inclination < -Math.PI / 2 || inclination > Math.PI / 2) {
            throw new IllegalArgumentException("Geomagnetic field info out of range");
        }

        return new SensorAdditionalInfo(
                null, TYPE_LOCAL_GEOMAGNETIC_FIELD, 0,
                null, new float[] { strength, declination, inclination});
    }
    /** @hide */
    public static SensorAdditionalInfo createCustomInfo(Sensor aSensor, int type, float[] data) {
        if (type < TYPE_CUSTOM_INFO || type >= TYPE_DEBUG_INFO || aSensor == null) {
            throw new IllegalArgumentException(
                    "invalid parameter(s): type: " + type + "; sensor: " + aSensor);
        }

        return new SensorAdditionalInfo(aSensor, type, 0, null, data);
    }
}