/*
 * Copyright (C) 2018 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package android.net.wifi;

import android.annotation.IntDef;
import android.annotation.NonNull;
import android.annotation.Nullable;
import android.annotation.SystemApi;
import android.util.SparseArray;

import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;
import java.util.concurrent.Executor;

/**
 * Easy Connect (DPP) Status Callback. Use this callback to get status updates (success, failure,
 * progress) from the Easy Connect operations.
 */
public abstract class EasyConnectStatusCallback {
    /**
     * Easy Connect R1 Success event: Configuration sent (Configurator mode). This is the last
     * and final Easy Connect event when either the local device or remote device implement R1.
     * If both devices implement R2, this event will never be received, and the
     * {@link #EASY_CONNECT_EVENT_SUCCESS_CONFIGURATION_APPLIED} will be received.
     * @hide
     */
    @SystemApi
    public static final int EASY_CONNECT_EVENT_SUCCESS_CONFIGURATION_SENT = 0;

    /**
     * Easy Connect R2 Success event: Configuration applied by Enrollee (Configurator mode).
     * This is the last and final Easy Connect event when both the local device and remote device
     * implement R2. If either the local device or remote device implement R1, this event will never
     * be received, and the {@link #EASY_CONNECT_EVENT_SUCCESS_CONFIGURATION_SENT} will be received.
     * @hide
     */
    @SystemApi
    public static final int EASY_CONNECT_EVENT_SUCCESS_CONFIGURATION_APPLIED = 1;

    /** @hide */
    @IntDef(prefix = {"EASY_CONNECT_EVENT_SUCCESS_"}, value = {
            EASY_CONNECT_EVENT_SUCCESS_CONFIGURATION_SENT,
            EASY_CONNECT_EVENT_SUCCESS_CONFIGURATION_APPLIED,
    })
    @Retention(RetentionPolicy.SOURCE)
    public @interface EasyConnectSuccessStatusCode {
    }

    /**
     * Easy Connect Progress event: Initial authentication with peer succeeded.
     * @hide
     */
    @SystemApi
    public static final int EASY_CONNECT_EVENT_PROGRESS_AUTHENTICATION_SUCCESS = 0;

    /**
     * Easy Connect Progress event: Peer requires more time to process bootstrapping.
     * @hide
     */
    @SystemApi
    public static final int EASY_CONNECT_EVENT_PROGRESS_RESPONSE_PENDING = 1;

    /**
     * Easy Connect R2 Progress event: Configuration sent to Enrollee, waiting for response
     * @hide
     */
    @SystemApi
    public static final int EASY_CONNECT_EVENT_PROGRESS_CONFIGURATION_SENT_WAITING_RESPONSE = 2;

    /**
     * Easy Connect R2 Progress event: Configuration accepted by Enrollee, waiting for response
     * @hide
     */
    @SystemApi
    public static final int EASY_CONNECT_EVENT_PROGRESS_CONFIGURATION_ACCEPTED = 3;

    /** @hide */
    @IntDef(prefix = {"EASY_CONNECT_EVENT_PROGRESS_"}, value = {
            EASY_CONNECT_EVENT_PROGRESS_AUTHENTICATION_SUCCESS,
            EASY_CONNECT_EVENT_PROGRESS_RESPONSE_PENDING,
            EASY_CONNECT_EVENT_PROGRESS_CONFIGURATION_SENT_WAITING_RESPONSE,
            EASY_CONNECT_EVENT_PROGRESS_CONFIGURATION_ACCEPTED,
    })
    @Retention(RetentionPolicy.SOURCE)
    public @interface EasyConnectProgressStatusCode {
    }

    /**
     * Easy Connect Failure event: Scanned QR code is either not a Easy Connect URI, or the Easy
     * Connect URI has errors.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_INVALID_URI = -1;

    /**
     * Easy Connect Failure event: Bootstrapping/Authentication initialization process failure.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_AUTHENTICATION = -2;

    /**
     * Easy Connect Failure event: Both devices are implementing the same role and are incompatible.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_NOT_COMPATIBLE = -3;

    /**
     * Easy Connect Failure event: Configuration process has failed due to malformed message.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_CONFIGURATION = -4;

    /**
     * Easy Connect Failure event: Easy Connect request while in another Easy Connect exchange.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_BUSY = -5;

    /**
     * Easy Connect Failure event: No response from the peer.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_TIMEOUT = -6;

    /**
     * Easy Connect Failure event: General protocol failure.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_GENERIC = -7;

    /**
     * Easy Connect Failure event: Feature or option is not supported.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_NOT_SUPPORTED = -8;

    /**
     * Easy Connect Failure event: Invalid network provided to Easy Connect configurator.
     * Network must either be WPA3-Personal (SAE) or WPA2-Personal (PSK).
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_INVALID_NETWORK = -9;

    /**
     * Easy Connect R2 Failure event: Enrollee cannot find the network.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_CANNOT_FIND_NETWORK = -10;

    /**
     * Easy Connect R2 Failure event: Enrollee failed to authenticate with the network.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_ENROLLEE_AUTHENTICATION = -11;

    /**
     * Easy Connect R2 Failure event: Enrollee rejected the configuration.
     */
    public static final int EASY_CONNECT_EVENT_FAILURE_ENROLLEE_REJECTED_CONFIGURATION = -12;

    /** @hide */
    @IntDef(prefix = {"EASY_CONNECT_EVENT_FAILURE_"}, value = {
            EASY_CONNECT_EVENT_FAILURE_INVALID_URI,
            EASY_CONNECT_EVENT_FAILURE_AUTHENTICATION,
            EASY_CONNECT_EVENT_FAILURE_NOT_COMPATIBLE,
            EASY_CONNECT_EVENT_FAILURE_CONFIGURATION,
            EASY_CONNECT_EVENT_FAILURE_BUSY,
            EASY_CONNECT_EVENT_FAILURE_TIMEOUT,
            EASY_CONNECT_EVENT_FAILURE_GENERIC,
            EASY_CONNECT_EVENT_FAILURE_NOT_SUPPORTED,
            EASY_CONNECT_EVENT_FAILURE_INVALID_NETWORK,
            EASY_CONNECT_EVENT_FAILURE_CANNOT_FIND_NETWORK,
            EASY_CONNECT_EVENT_FAILURE_ENROLLEE_AUTHENTICATION,
            EASY_CONNECT_EVENT_FAILURE_ENROLLEE_REJECTED_CONFIGURATION,
    })
    @Retention(RetentionPolicy.SOURCE)
    public @interface EasyConnectFailureStatusCode {
    }

    /** @hide */
    @SystemApi
    public EasyConnectStatusCallback() {
        // Fully-static utility classes must not have constructor
    }

    /**
     * Called when local Easy Connect Enrollee successfully receives a new Wi-Fi configuration from
     * the
     * peer Easy Connect configurator. This callback marks the successful end of the Easy Connect
     * current Easy Connect
     * session, and no further callbacks will be called. This callback is the successful outcome
     * of a Easy Connect flow starting with
     * {@link WifiManager#startEasyConnectAsEnrolleeInitiator(String, Executor,
     * EasyConnectStatusCallback)} .
     *
     * @param newNetworkId New Wi-Fi configuration with a network ID received from the configurator
     * @hide
     */
    @SystemApi
    public abstract void onEnrolleeSuccess(int newNetworkId);

    /**
     * Called when a Easy Connect success event takes place, except for when configuration is
     * received from an external Configurator. The callback onSuccessConfigReceived will be used in
     * this case. This callback marks the successful end of the current Easy Connect session, and no
     * further callbacks will be called. This callback is the successful outcome of a Easy Connect
     * flow starting with {@link WifiManager#startEasyConnectAsConfiguratorInitiator(String, int,
     * int, Executor,EasyConnectStatusCallback)}.
     *
     * @param code Easy Connect success status code.
     * @hide
     */
    @SystemApi
    public abstract void onConfiguratorSuccess(@EasyConnectSuccessStatusCode int code);

    /**
     * Called when a Easy Connect Failure event takes place. This callback marks the unsuccessful
     * end of the current Easy Connect session, and no further callbacks will be called.
     *
     * @param code Easy Connect failure status code.
     * @hide
     */
    @SystemApi
    public void onFailure(@EasyConnectFailureStatusCode int code) {}

    /**
     * Called when a Easy Connect Failure event takes place. This callback marks the unsuccessful
     * end of the current Easy Connect session, and no further callbacks will be called.
     *
     * Note: Easy Connect (DPP) R2, provides additional details for the Configurator when the
     * remote Enrollee is unable to connect to a network. The ssid, channelList and bandList
     * inputs are initialized only for the EASY_CONNECT_EVENT_FAILURE_CANNOT_FIND_NETWORK failure
     * code, and the ssid and bandList are initialized for the
     * EASY_CONNECT_EVENT_FAILURE_ENROLLEE_AUTHENTICATION failure code.
     *
     * @param code Easy Connect failure status code.
     * @param ssid SSID of the network the Enrollee tried to connect to.
     * @param channelListArray List of Global Operating classes and channel sets the Enrollee used
     *                         to scan to find the network, see the "DPP Connection Status Object"
     *                         section in the specification for the format, and Table E-4 in
     *                         IEEE Std 802.11-2016 - Global operating classes for more details.
     *                         The sparse array key is the Global Operating class, and the value
     *                         is an integer array of Wi-Fi channels.
     * @param operatingClassArray Array of bands the Enrollee supports as expressed as the Global
     *                            Operating Class, see Table E-4 in IEEE Std 802.11-2016 - Global
     *                            operating classes.
     * @hide
     */
    @SystemApi
    public void onFailure(@EasyConnectFailureStatusCode int code, @Nullable String ssid,
            @NonNull SparseArray<int[]> channelListArray, @NonNull int[] operatingClassArray) {
        onFailure(code);
    }

    /**
     * Called when Easy Connect events that indicate progress take place. Can be used by UI elements
     * to show progress.
     *
     * @param code Easy Connect progress status code.
     * @hide
     */
    @SystemApi
    public abstract void onProgress(@EasyConnectProgressStatusCode int code);
}