blob: ba97aeb837bedefd7f6bb6d58237a875e95c975b [file] [log] [blame]
//===-- llvm/MC/MCInstrDesc.h - Instruction Descriptors -*- C++ -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines the MCOperandInfo and MCInstrDesc classes, which
// are used to describe target instructions and their operands.
//
//===----------------------------------------------------------------------===//
#ifndef LLVM_MC_MCINSTRDESC_H
#define LLVM_MC_MCINSTRDESC_H
#include "llvm/MC/MCRegisterInfo.h"
#include "llvm/Support/DataTypes.h"
#include <string>
namespace llvm {
class MCInst;
class MCSubtargetInfo;
class FeatureBitset;
//===----------------------------------------------------------------------===//
// Machine Operand Flags and Description
//===----------------------------------------------------------------------===//
namespace MCOI {
// Operand constraints
enum OperandConstraint {
TIED_TO = 0, // Must be allocated the same register as.
EARLY_CLOBBER // Operand is an early clobber register operand
};
/// These are flags set on operands, but should be considered
/// private, all access should go through the MCOperandInfo accessors.
/// See the accessors for a description of what these are.
enum OperandFlags { LookupPtrRegClass = 0, Predicate, OptionalDef };
/// Operands are tagged with one of the values of this enum.
enum OperandType {
OPERAND_UNKNOWN = 0,
OPERAND_IMMEDIATE = 1,
OPERAND_REGISTER = 2,
OPERAND_MEMORY = 3,
OPERAND_PCREL = 4,
OPERAND_FIRST_GENERIC = 6,
OPERAND_GENERIC_0 = 6,
OPERAND_GENERIC_1 = 7,
OPERAND_GENERIC_2 = 8,
OPERAND_GENERIC_3 = 9,
OPERAND_GENERIC_4 = 10,
OPERAND_GENERIC_5 = 11,
OPERAND_LAST_GENERIC = 11,
OPERAND_FIRST_TARGET = 12,
};
}
/// This holds information about one operand of a machine instruction,
/// indicating the register class for register operands, etc.
class MCOperandInfo {
public:
/// This specifies the register class enumeration of the operand
/// if the operand is a register. If isLookupPtrRegClass is set, then this is
/// an index that is passed to TargetRegisterInfo::getPointerRegClass(x) to
/// get a dynamic register class.
int16_t RegClass;
/// These are flags from the MCOI::OperandFlags enum.
uint8_t Flags;
/// Information about the type of the operand.
uint8_t OperandType;
/// The lower 16 bits are used to specify which constraints are set.
/// The higher 16 bits are used to specify the value of constraints (4 bits
/// each).
uint32_t Constraints;
/// Set if this operand is a pointer value and it requires a callback
/// to look up its register class.
bool isLookupPtrRegClass() const {
return Flags & (1 << MCOI::LookupPtrRegClass);
}
/// Set if this is one of the operands that made up of the predicate
/// operand that controls an isPredicable() instruction.
bool isPredicate() const { return Flags & (1 << MCOI::Predicate); }
/// Set if this operand is a optional def.
bool isOptionalDef() const { return Flags & (1 << MCOI::OptionalDef); }
bool isGenericType() const {
return OperandType >= MCOI::OPERAND_FIRST_GENERIC &&
OperandType <= MCOI::OPERAND_LAST_GENERIC;
}
unsigned getGenericTypeIndex() const {
assert(isGenericType() && "non-generic types don't have an index");
return OperandType - MCOI::OPERAND_FIRST_GENERIC;
}
};
//===----------------------------------------------------------------------===//
// Machine Instruction Flags and Description
//===----------------------------------------------------------------------===//
namespace MCID {
/// These should be considered private to the implementation of the
/// MCInstrDesc class. Clients should use the predicate methods on MCInstrDesc,
/// not use these directly. These all correspond to bitfields in the
/// MCInstrDesc::Flags field.
enum Flag {
Variadic = 0,
HasOptionalDef,
Pseudo,
Return,
EHScopeReturn,
Call,
Barrier,
Terminator,
Branch,
IndirectBranch,
Compare,
MoveImm,
MoveReg,
Bitcast,
Select,
DelaySlot,
FoldableAsLoad,
MayLoad,
MayStore,
Predicable,
NotDuplicable,
UnmodeledSideEffects,
Commutable,
ConvertibleTo3Addr,
UsesCustomInserter,
HasPostISelHook,
Rematerializable,
CheapAsAMove,
ExtraSrcRegAllocReq,
ExtraDefRegAllocReq,
RegSequence,
ExtractSubreg,
InsertSubreg,
Convergent,
Add,
Trap
};
}
/// Describe properties that are true of each instruction in the target
/// description file. This captures information about side effects, register
/// use and many other things. There is one instance of this struct for each
/// target instruction class, and the MachineInstr class points to this struct
/// directly to describe itself.
class MCInstrDesc {
public:
unsigned short Opcode; // The opcode number
unsigned short NumOperands; // Num of args (may be more if variable_ops)
unsigned char NumDefs; // Num of args that are definitions
unsigned char Size; // Number of bytes in encoding.
unsigned short SchedClass; // enum identifying instr sched class
uint64_t Flags; // Flags identifying machine instr class
uint64_t TSFlags; // Target Specific Flag values
const MCPhysReg *ImplicitUses; // Registers implicitly read by this instr
const MCPhysReg *ImplicitDefs; // Registers implicitly defined by this instr
const MCOperandInfo *OpInfo; // 'NumOperands' entries about operands
// Subtarget feature that this is deprecated on, if any
// -1 implies this is not deprecated by any single feature. It may still be
// deprecated due to a "complex" reason, below.
int64_t DeprecatedFeature;
// A complex method to determine if a certain instruction is deprecated or
// not, and return the reason for deprecation.
bool (*ComplexDeprecationInfo)(MCInst &, const MCSubtargetInfo &,
std::string &);
/// Returns the value of the specific constraint if
/// it is set. Returns -1 if it is not set.
int getOperandConstraint(unsigned OpNum,
MCOI::OperandConstraint Constraint) const {
if (OpNum < NumOperands &&
(OpInfo[OpNum].Constraints & (1 << Constraint))) {
unsigned Pos = 16 + Constraint * 4;
return (int)(OpInfo[OpNum].Constraints >> Pos) & 0xf;
}
return -1;
}
/// Returns true if a certain instruction is deprecated and if so
/// returns the reason in \p Info.
bool getDeprecatedInfo(MCInst &MI, const MCSubtargetInfo &STI,
std::string &Info) const;
/// Return the opcode number for this descriptor.
unsigned getOpcode() const { return Opcode; }
/// Return the number of declared MachineOperands for this
/// MachineInstruction. Note that variadic (isVariadic() returns true)
/// instructions may have additional operands at the end of the list, and note
/// that the machine instruction may include implicit register def/uses as
/// well.
unsigned getNumOperands() const { return NumOperands; }
using const_opInfo_iterator = const MCOperandInfo *;
const_opInfo_iterator opInfo_begin() const { return OpInfo; }
const_opInfo_iterator opInfo_end() const { return OpInfo + NumOperands; }
iterator_range<const_opInfo_iterator> operands() const {
return make_range(opInfo_begin(), opInfo_end());
}
/// Return the number of MachineOperands that are register
/// definitions. Register definitions always occur at the start of the
/// machine operand list. This is the number of "outs" in the .td file,
/// and does not include implicit defs.
unsigned getNumDefs() const { return NumDefs; }
/// Return flags of this instruction.
uint64_t getFlags() const { return Flags; }
/// Return true if this instruction can have a variable number of
/// operands. In this case, the variable operands will be after the normal
/// operands but before the implicit definitions and uses (if any are
/// present).
bool isVariadic() const { return Flags & (1ULL << MCID::Variadic); }
/// Set if this instruction has an optional definition, e.g.
/// ARM instructions which can set condition code if 's' bit is set.
bool hasOptionalDef() const { return Flags & (1ULL << MCID::HasOptionalDef); }
/// Return true if this is a pseudo instruction that doesn't
/// correspond to a real machine instruction.
bool isPseudo() const { return Flags & (1ULL << MCID::Pseudo); }
/// Return true if the instruction is a return.
bool isReturn() const { return Flags & (1ULL << MCID::Return); }
/// Return true if the instruction is an add instruction.
bool isAdd() const { return Flags & (1ULL << MCID::Add); }
/// Return true if this instruction is a trap.
bool isTrap() const { return Flags & (1ULL << MCID::Trap); }
/// Return true if the instruction is a register to register move.
bool isMoveReg() const { return Flags & (1ULL << MCID::MoveReg); }
/// Return true if the instruction is a call.
bool isCall() const { return Flags & (1ULL << MCID::Call); }
/// Returns true if the specified instruction stops control flow
/// from executing the instruction immediately following it. Examples include
/// unconditional branches and return instructions.
bool isBarrier() const { return Flags & (1ULL << MCID::Barrier); }
/// Returns true if this instruction part of the terminator for
/// a basic block. Typically this is things like return and branch
/// instructions.
///
/// Various passes use this to insert code into the bottom of a basic block,
/// but before control flow occurs.
bool isTerminator() const { return Flags & (1ULL << MCID::Terminator); }
/// Returns true if this is a conditional, unconditional, or
/// indirect branch. Predicates below can be used to discriminate between
/// these cases, and the TargetInstrInfo::AnalyzeBranch method can be used to
/// get more information.
bool isBranch() const { return Flags & (1ULL << MCID::Branch); }
/// Return true if this is an indirect branch, such as a
/// branch through a register.
bool isIndirectBranch() const { return Flags & (1ULL << MCID::IndirectBranch); }
/// Return true if this is a branch which may fall
/// through to the next instruction or may transfer control flow to some other
/// block. The TargetInstrInfo::AnalyzeBranch method can be used to get more
/// information about this branch.
bool isConditionalBranch() const {
return isBranch() & !isBarrier() & !isIndirectBranch();
}
/// Return true if this is a branch which always
/// transfers control flow to some other block. The
/// TargetInstrInfo::AnalyzeBranch method can be used to get more information
/// about this branch.
bool isUnconditionalBranch() const {
return isBranch() & isBarrier() & !isIndirectBranch();
}
/// Return true if this is a branch or an instruction which directly
/// writes to the program counter. Considered 'may' affect rather than
/// 'does' affect as things like predication are not taken into account.
bool mayAffectControlFlow(const MCInst &MI, const MCRegisterInfo &RI) const;
/// Return true if this instruction has a predicate operand
/// that controls execution. It may be set to 'always', or may be set to other
/// values. There are various methods in TargetInstrInfo that can be used to
/// control and modify the predicate in this instruction.
bool isPredicable() const { return Flags & (1ULL << MCID::Predicable); }
/// Return true if this instruction is a comparison.
bool isCompare() const { return Flags & (1ULL << MCID::Compare); }
/// Return true if this instruction is a move immediate
/// (including conditional moves) instruction.
bool isMoveImmediate() const { return Flags & (1ULL << MCID::MoveImm); }
/// Return true if this instruction is a bitcast instruction.
bool isBitcast() const { return Flags & (1ULL << MCID::Bitcast); }
/// Return true if this is a select instruction.
bool isSelect() const { return Flags & (1ULL << MCID::Select); }
/// Return true if this instruction cannot be safely
/// duplicated. For example, if the instruction has a unique labels attached
/// to it, duplicating it would cause multiple definition errors.
bool isNotDuplicable() const { return Flags & (1ULL << MCID::NotDuplicable); }
/// Returns true if the specified instruction has a delay slot which
/// must be filled by the code generator.
bool hasDelaySlot() const { return Flags & (1ULL << MCID::DelaySlot); }
/// Return true for instructions that can be folded as memory operands
/// in other instructions. The most common use for this is instructions that
/// are simple loads from memory that don't modify the loaded value in any
/// way, but it can also be used for instructions that can be expressed as
/// constant-pool loads, such as V_SETALLONES on x86, to allow them to be
/// folded when it is beneficial. This should only be set on instructions
/// that return a value in their only virtual register definition.
bool canFoldAsLoad() const { return Flags & (1ULL << MCID::FoldableAsLoad); }
/// Return true if this instruction behaves
/// the same way as the generic REG_SEQUENCE instructions.
/// E.g., on ARM,
/// dX VMOVDRR rY, rZ
/// is equivalent to
/// dX = REG_SEQUENCE rY, ssub_0, rZ, ssub_1.
///
/// Note that for the optimizers to be able to take advantage of
/// this property, TargetInstrInfo::getRegSequenceLikeInputs has to be
/// override accordingly.
bool isRegSequenceLike() const { return Flags & (1ULL << MCID::RegSequence); }
/// Return true if this instruction behaves
/// the same way as the generic EXTRACT_SUBREG instructions.
/// E.g., on ARM,
/// rX, rY VMOVRRD dZ
/// is equivalent to two EXTRACT_SUBREG:
/// rX = EXTRACT_SUBREG dZ, ssub_0
/// rY = EXTRACT_SUBREG dZ, ssub_1
///
/// Note that for the optimizers to be able to take advantage of
/// this property, TargetInstrInfo::getExtractSubregLikeInputs has to be
/// override accordingly.
bool isExtractSubregLike() const {
return Flags & (1ULL << MCID::ExtractSubreg);
}
/// Return true if this instruction behaves
/// the same way as the generic INSERT_SUBREG instructions.
/// E.g., on ARM,
/// dX = VSETLNi32 dY, rZ, Imm
/// is equivalent to a INSERT_SUBREG:
/// dX = INSERT_SUBREG dY, rZ, translateImmToSubIdx(Imm)
///
/// Note that for the optimizers to be able to take advantage of
/// this property, TargetInstrInfo::getInsertSubregLikeInputs has to be
/// override accordingly.
bool isInsertSubregLike() const { return Flags & (1ULL << MCID::InsertSubreg); }
/// Return true if this instruction is convergent.
///
/// Convergent instructions may not be made control-dependent on any
/// additional values.
bool isConvergent() const { return Flags & (1ULL << MCID::Convergent); }
//===--------------------------------------------------------------------===//
// Side Effect Analysis
//===--------------------------------------------------------------------===//
/// Return true if this instruction could possibly read memory.
/// Instructions with this flag set are not necessarily simple load
/// instructions, they may load a value and modify it, for example.
bool mayLoad() const { return Flags & (1ULL << MCID::MayLoad); }
/// Return true if this instruction could possibly modify memory.
/// Instructions with this flag set are not necessarily simple store
/// instructions, they may store a modified value based on their operands, or
/// may not actually modify anything, for example.
bool mayStore() const { return Flags & (1ULL << MCID::MayStore); }
/// Return true if this instruction has side
/// effects that are not modeled by other flags. This does not return true
/// for instructions whose effects are captured by:
///
/// 1. Their operand list and implicit definition/use list. Register use/def
/// info is explicit for instructions.
/// 2. Memory accesses. Use mayLoad/mayStore.
/// 3. Calling, branching, returning: use isCall/isReturn/isBranch.
///
/// Examples of side effects would be modifying 'invisible' machine state like
/// a control register, flushing a cache, modifying a register invisible to
/// LLVM, etc.
bool hasUnmodeledSideEffects() const {
return Flags & (1ULL << MCID::UnmodeledSideEffects);
}
//===--------------------------------------------------------------------===//
// Flags that indicate whether an instruction can be modified by a method.
//===--------------------------------------------------------------------===//
/// Return true if this may be a 2- or 3-address instruction (of the
/// form "X = op Y, Z, ..."), which produces the same result if Y and Z are
/// exchanged. If this flag is set, then the
/// TargetInstrInfo::commuteInstruction method may be used to hack on the
/// instruction.
///
/// Note that this flag may be set on instructions that are only commutable
/// sometimes. In these cases, the call to commuteInstruction will fail.
/// Also note that some instructions require non-trivial modification to
/// commute them.
bool isCommutable() const { return Flags & (1ULL << MCID::Commutable); }
/// Return true if this is a 2-address instruction which can be changed
/// into a 3-address instruction if needed. Doing this transformation can be
/// profitable in the register allocator, because it means that the
/// instruction can use a 2-address form if possible, but degrade into a less
/// efficient form if the source and dest register cannot be assigned to the
/// same register. For example, this allows the x86 backend to turn a "shl
/// reg, 3" instruction into an LEA instruction, which is the same speed as
/// the shift but has bigger code size.
///
/// If this returns true, then the target must implement the
/// TargetInstrInfo::convertToThreeAddress method for this instruction, which
/// is allowed to fail if the transformation isn't valid for this specific
/// instruction (e.g. shl reg, 4 on x86).
///
bool isConvertibleTo3Addr() const {
return Flags & (1ULL << MCID::ConvertibleTo3Addr);
}
/// Return true if this instruction requires custom insertion support
/// when the DAG scheduler is inserting it into a machine basic block. If
/// this is true for the instruction, it basically means that it is a pseudo
/// instruction used at SelectionDAG time that is expanded out into magic code
/// by the target when MachineInstrs are formed.
///
/// If this is true, the TargetLoweringInfo::InsertAtEndOfBasicBlock method
/// is used to insert this into the MachineBasicBlock.
bool usesCustomInsertionHook() const {
return Flags & (1ULL << MCID::UsesCustomInserter);
}
/// Return true if this instruction requires *adjustment* after
/// instruction selection by calling a target hook. For example, this can be
/// used to fill in ARM 's' optional operand depending on whether the
/// conditional flag register is used.
bool hasPostISelHook() const { return Flags & (1ULL << MCID::HasPostISelHook); }
/// Returns true if this instruction is a candidate for remat. This
/// flag is only used in TargetInstrInfo method isTriviallyRematerializable.
///
/// If this flag is set, the isReallyTriviallyReMaterializable()
/// or isReallyTriviallyReMaterializableGeneric methods are called to verify
/// the instruction is really rematable.
bool isRematerializable() const {
return Flags & (1ULL << MCID::Rematerializable);
}
/// Returns true if this instruction has the same cost (or less) than a
/// move instruction. This is useful during certain types of optimizations
/// (e.g., remat during two-address conversion or machine licm) where we would
/// like to remat or hoist the instruction, but not if it costs more than
/// moving the instruction into the appropriate register. Note, we are not
/// marking copies from and to the same register class with this flag.
///
/// This method could be called by interface TargetInstrInfo::isAsCheapAsAMove
/// for different subtargets.
bool isAsCheapAsAMove() const { return Flags & (1ULL << MCID::CheapAsAMove); }
/// Returns true if this instruction source operands have special
/// register allocation requirements that are not captured by the operand
/// register classes. e.g. ARM::STRD's two source registers must be an even /
/// odd pair, ARM::STM registers have to be in ascending order. Post-register
/// allocation passes should not attempt to change allocations for sources of
/// instructions with this flag.
bool hasExtraSrcRegAllocReq() const {
return Flags & (1ULL << MCID::ExtraSrcRegAllocReq);
}
/// Returns true if this instruction def operands have special register
/// allocation requirements that are not captured by the operand register
/// classes. e.g. ARM::LDRD's two def registers must be an even / odd pair,
/// ARM::LDM registers have to be in ascending order. Post-register
/// allocation passes should not attempt to change allocations for definitions
/// of instructions with this flag.
bool hasExtraDefRegAllocReq() const {
return Flags & (1ULL << MCID::ExtraDefRegAllocReq);
}
/// Return a list of registers that are potentially read by any
/// instance of this machine instruction. For example, on X86, the "adc"
/// instruction adds two register operands and adds the carry bit in from the
/// flags register. In this case, the instruction is marked as implicitly
/// reading the flags. Likewise, the variable shift instruction on X86 is
/// marked as implicitly reading the 'CL' register, which it always does.
///
/// This method returns null if the instruction has no implicit uses.
const MCPhysReg *getImplicitUses() const { return ImplicitUses; }
/// Return the number of implicit uses this instruction has.
unsigned getNumImplicitUses() const {
if (!ImplicitUses)
return 0;
unsigned i = 0;
for (; ImplicitUses[i]; ++i) /*empty*/
;
return i;
}
/// Return a list of registers that are potentially written by any
/// instance of this machine instruction. For example, on X86, many
/// instructions implicitly set the flags register. In this case, they are
/// marked as setting the FLAGS. Likewise, many instructions always deposit
/// their result in a physical register. For example, the X86 divide
/// instruction always deposits the quotient and remainder in the EAX/EDX
/// registers. For that instruction, this will return a list containing the
/// EAX/EDX/EFLAGS registers.
///
/// This method returns null if the instruction has no implicit defs.
const MCPhysReg *getImplicitDefs() const { return ImplicitDefs; }
/// Return the number of implicit defs this instruct has.
unsigned getNumImplicitDefs() const {
if (!ImplicitDefs)
return 0;
unsigned i = 0;
for (; ImplicitDefs[i]; ++i) /*empty*/
;
return i;
}
/// Return true if this instruction implicitly
/// uses the specified physical register.
bool hasImplicitUseOfPhysReg(unsigned Reg) const {
if (const MCPhysReg *ImpUses = ImplicitUses)
for (; *ImpUses; ++ImpUses)
if (*ImpUses == Reg)
return true;
return false;
}
/// Return true if this instruction implicitly
/// defines the specified physical register.
bool hasImplicitDefOfPhysReg(unsigned Reg,
const MCRegisterInfo *MRI = nullptr) const;
/// Return the scheduling class for this instruction. The
/// scheduling class is an index into the InstrItineraryData table. This
/// returns zero if there is no known scheduling information for the
/// instruction.
unsigned getSchedClass() const { return SchedClass; }
/// Return the number of bytes in the encoding of this instruction,
/// or zero if the encoding size cannot be known from the opcode.
unsigned getSize() const { return Size; }
/// Find the index of the first operand in the
/// operand list that is used to represent the predicate. It returns -1 if
/// none is found.
int findFirstPredOperandIdx() const {
if (isPredicable()) {
for (unsigned i = 0, e = getNumOperands(); i != e; ++i)
if (OpInfo[i].isPredicate())
return i;
}
return -1;
}
/// Return true if this instruction defines the specified physical
/// register, either explicitly or implicitly.
bool hasDefOfPhysReg(const MCInst &MI, unsigned Reg,
const MCRegisterInfo &RI) const;
};
} // end namespace llvm
#endif