blob: b1b3957c0e8432eb5e3032ca6925c90d3e2fbeff [file] [log] [blame]
# /* vim: set ai ts=4 ft=sh: */
#
# Copyright 2011, The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
_adb() {
if ! check_type "$1" >/dev/null; then
return
fi
if check_type _init_completion >/dev/null; then
_init_completion || return
fi
local where i cur serial
COMPREPLY=()
serial="${ANDROID_SERIAL:-none}"
where=OPTIONS
for ((i=1; i <= COMP_CWORD; i++)); do
cur="${COMP_WORDS[i]}"
case "${cur}" in
-s)
where=OPT_SERIAL
;;
-p)
where=OPT_PATH
;;
-*)
where=OPTIONS
;;
*)
if [[ $where == OPT_SERIAL ]]; then
where=OPT_SERIAL_ARG
serial=${cur}
else
where=COMMAND
break
fi
;;
esac
done
if [[ $where == COMMAND && $i -ge $COMP_CWORD ]]; then
where=OPTIONS
fi
OPTIONS="-d -e -s -p"
COMMAND="devices connect disconnect push pull sync shell emu logcat lolcat forward jdwp install uninstall bugreport help version start-server kill-server get-state get-serialno status-window remount reboot reboot-bootloader root usb tcpip disable-verity"
case $where in
OPTIONS|OPT_SERIAL|OPT_PATH)
COMPREPLY=( $(compgen -W "$OPTIONS $COMMAND" -- "$cur") )
;;
OPT_SERIAL_ARG)
local devices=$(command adb devices 2> /dev/null | grep -v "List of devices" | awk '{ print $1 }')
COMPREPLY=( $(compgen -W "${devices}" -- ${cur}) )
;;
COMMAND)
if [[ $i -eq $COMP_CWORD ]]; then
COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") )
else
i=$((i+1))
case "${cur}" in
install)
_adb_cmd_install "$serial" $i
;;
sideload)
_adb_cmd_sideload "$serial" $i
;;
pull)
_adb_cmd_pull "$serial" $i
;;
push)
_adb_cmd_push "$serial" $i
;;
reboot)
if [[ $COMP_CWORD == $i ]]; then
args="bootloader recovery"
COMPREPLY=( $(compgen -W "${args}" -- "${COMP_WORDS[i]}") )
fi
;;
shell)
_adb_cmd_shell "$serial" $i
;;
uninstall)
_adb_cmd_uninstall "$serial" $i
;;
esac
fi
;;
esac
return 0
}
_adb_cmd_install() {
local serial i cur where
serial=$1
i=$2
where=OPTIONS
for ((; i <= COMP_CWORD; i++)); do
cur="${COMP_WORDS[i]}"
case "${cur}" in
-*)
where=OPTIONS
;;
*)
where=FILE
break
;;
esac
done
cur="${COMP_WORDS[COMP_CWORD]}"
if [[ $where == OPTIONS ]]; then
COMPREPLY=( $(compgen -W "-d -l -r -s" -- "${cur}") )
return
fi
_adb_util_complete_local_file "${cur}" '!*.apk'
}
_adb_cmd_sideload() {
local serial i cur
serial=$1
i=$2
cur="${COMP_WORDS[COMP_CWORD]}"
_adb_util_complete_local_file "${cur}" '!*.zip'
}
_adb_cmd_push() {
local serial IFS=$'\n' i cur
serial=$1
i=$2
cur="${COMP_WORDS[COMP_CWORD]}"
if [[ $COMP_CWORD == $i ]]; then
_adb_util_complete_local_file "${cur}"
elif [[ $COMP_CWORD == $(($i+1)) ]]; then
if [ "${cur}" == "" ]; then
cur="/"
fi
_adb_util_list_files $serial "${cur}"
fi
}
_adb_cmd_pull() {
local serial IFS=$'\n' i cur
serial=$1
i=$2
cur="${COMP_WORDS[COMP_CWORD]}"
if [[ $COMP_CWORD == $i ]]; then
if [ "${cur}" == "" ]; then
cur="/"
fi
_adb_util_list_files $serial "${cur}"
elif [[ $COMP_CWORD == $(($i+1)) ]]; then
_adb_util_complete_local_file "${cur}"
fi
}
_adb_cmd_shell() {
local serial IFS=$'\n' i cur
local -a args
serial=$1
i=$2
cur="${COMP_WORDS[i]}"
if [ "$serial" != "none" ]; then
args=(-s $serial)
fi
if [[ $i -eq $COMP_CWORD && ${cur:0:1} != "/" ]]; then
paths=$(command adb ${args[@]} shell echo '$'PATH 2> /dev/null | tr -d '\r' | tr : '\n')
COMMAND=$(command adb ${args[@]} shell ls $paths '2>' /dev/null | tr -d '\r' | {
while read -r tmp; do
command=${tmp##*/}
printf '%s\n' "$command"
done
})
COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") )
return 0
fi
i=$((i+1))
case "$cur" in
ls)
_adb_shell_file_command $serial $i "--color -A -C -F -H -L -R -S -Z -a -c -d -f -h -i -k -l -m -n -p -q -r -s -t -u -x -1"
;;
cat)
_adb_shell_file_command $serial $i "-h -e -t -u -v"
;;
dumpsys)
_adb_cmd_shell_dumpsys "$serial" $i
;;
am)
_adb_cmd_shell_am "$serial" $i
;;
pm)
_adb_cmd_shell_pm "$serial" $i
;;
/*)
_adb_util_list_files $serial "$cur"
;;
*)
COMPREPLY=( )
;;
esac
return 0
}
_adb_cmd_shell_dumpsys() {
local serial i cur
local -a args
local candidates
unset IFS
serial=$1
i=$2
if [ "$serial" != "none" ]; then
args=(-s $serial)
fi
if (( $i == $COMP_CWORD )) ; then
cur="${COMP_WORDS[COMP_CWORD]}"
# First line is a header, so need "1d".
candidates=$(command adb ${args[@]} shell dumpsys -l 2> /dev/null | sed -e '1d;s/^ *//' | tr -d '\r')
candidates="-l $candidates"
COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
return 0
fi
COMPREPLY=( )
return 0
}
_adb_cmd_shell_am() {
local serial i cur
local candidates
unset IFS
serial=$1
i=$2
if (( $i == $COMP_CWORD )) ; then
cur="${COMP_WORDS[COMP_CWORD]}"
candidates="broadcast clear-debug-app clear-watch-heap dumpheap force-stop get-config get-inactive hang idle-maintenance instrument kill kill-all monitor package-importance profile restart screen-compat send-trim-memory set-debug-app set-inactive set-watch-heap stack start startservice start-user stopservice stop-user suppress-resize-config-changes switch-user task to-app-uri to-intent-uri to-uri"
COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
return 0
fi
COMPREPLY=( )
return 0
}
_adb_cmd_shell_pm() {
local serial i cur
local candidates
unset IFS
serial=$1
i=$2
if (( $i == $COMP_CWORD )) ; then
cur="${COMP_WORDS[COMP_CWORD]}"
candidates="-l -lf -p clear create-user default-state disable"
candidates+=" disable-until-used disable-user dump enable"
candidates+=" get-app-link get-install-location get-max-users"
candidates+=" get-max-running-users grant hide install"
candidates+=" install-abandon install-commit install-create"
candidates+=" install-write list move-package"
candidates+=" move-primary-storage path remove-user"
candidates+=" reset-permissions revoke set-app-link"
candidates+=" set-installer set-install-location"
candidates+=" set-permission-enforced trim-caches unhide"
candidates+=" uninstall"
COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
return 0
fi
if (( $i + 1 == $COMP_CWORD )) && [[ "${COMP_WORDS[COMP_CWORD -1]}" == "list" ]] ; then
cur="${COMP_WORDS[COMP_CWORD]}"
candidates="packages permission-groups permissions instrumentation features libraries users"
COMPREPLY=( $(compgen -W "$candidates" -- "$cur") )
return 0
fi
COMPREPLY=( )
return 0
}
_adb_cmd_uninstall() {
local serial i where cur packages
serial=$1
i=$2
if [ "$serial" != "none" ]; then
args=(-s $serial)
fi
where=OPTIONS
for ((; i <= COMP_CWORD; i++)); do
cur="${COMP_WORDS[i]}"
case "${cur}" in
-*)
where=OPTIONS
;;
*)
where=FILE
break
;;
esac
done
cur="${COMP_WORDS[COMP_CWORD]}"
if [[ $where == OPTIONS ]]; then
COMPREPLY=( $(compgen -W "-k" -- "${cur}") )
fi
packages="$(
command adb ${args[@]} shell pm list packages '2>' /dev/null 2> /dev/null | tr -d '\r' | {
while read -r tmp; do
local package=${tmp#package:}
echo -n "${package} "
done
}
)"
COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -W "${packages}" -- "${cur}") )
}
_adb_shell_file_command() {
local serial i cur file options
local -a args
serial=$1
i=$2
if [ "$serial" != "none" ]; then
args=(-s $serial)
fi
options=$3
where=OPTIONS
for ((; i <= COMP_CWORD; i++)); do
cur="${COMP_WORDS[i]}"
case "${cur}" in
-*)
where=OPTIONS
;;
*)
where=FILE
break
;;
esac
done
file="${COMP_WORDS[COMP_CWORD]}"
if [[ ${file} == "" ]]; then
file="/"
fi
case $where in
OPTIONS)
unset IFS
COMPREPLY=( $(compgen -W "$options" -- "$cur") )
;;
FILE)
_adb_util_list_files $serial "$file"
;;
esac
return 0
}
_adb_util_list_files() {
local serial dir IFS=$'\n'
local -a toks
local -a args
serial="$1"
file="$2"
if [ "$serial" != "none" ]; then
args=(-s $serial)
fi
if [[ $( command adb ${args[@]} shell ls -dF / '2>/dev/null' | tr -d '\r' ) == "d /" ]] ; then
toks=( ${toks[@]-} $(
command adb ${args[@]} shell ls -dF ${file}"*" '2>' /dev/null 2> /dev/null | tr -d '\r' | {
while read -r tmp; do
filetype=${tmp%% *}
filename=${tmp:${#filetype}+1}
if [[ ${filetype:${#filetype}-1:1} == d ]]; then
printf '%s/\n' "$filename"
else
printf '%s\n' "$filename"
fi
done
}
))
else
toks=( ${toks[@]-} $(
command adb ${args[@]} shell ls -dp ${file}"*" '2>/dev/null' 2> /dev/null | tr -d '\r'
))
fi
# Since we're probably doing file completion here, don't add a space after.
if [[ $(check_type compopt) == "builtin" ]]; then
compopt -o nospace
fi
COMPREPLY=( ${COMPREPLY[@]:-} "${toks[@]}" )
}
_adb_util_complete_local_file()
{
local file xspec i j IFS=$'\n'
local -a dirs files
file=$1
xspec=$2
# Since we're probably doing file completion here, don't add a space after.
if [[ $(check_type compopt) == "builtin" ]]; then
compopt -o plusdirs
if [[ "${xspec}" == "" ]]; then
COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") )
else
compopt +o filenames
COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") )
fi
else
# Work-around for shells with no compopt
dirs=( $(compgen -d -- "${cur}" ) )
if [[ "${xspec}" == "" ]]; then
files=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") )
else
files=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") )
fi
COMPREPLY=( $(
for i in "${files[@]}"; do
local skip=
for j in "${dirs[@]}"; do
if [[ $i == $j ]]; then
skip=1
break
fi
done
[[ -n $skip ]] || printf "%s\n" "$i"
done
))
COMPREPLY=( ${COMPREPLY[@]:-} $(
for i in "${dirs[@]}"; do
printf "%s/\n" "$i"
done
))
fi
}
if [[ $(check_type compopt) == "builtin" ]]; then
complete -F _adb adb
else
complete -o nospace -F _adb adb
fi