Protected Virtual Machine Firmware

In the context of the Android Virtualization Framework, a hypervisor (e.g. pKVM) enforces full memory isolation between its virtual machines (VMs) and the host. As a result, the host is only allowed to access memory that has been explicitly shared back by a VM. Such protected VMs (“pVMs”) are therefore able to manipulate secrets without being at risk of an attacker stealing them by compromising the Android host.

As pVMs are started dynamically by a virtual machine manager (“VMM”) running as a host process and as pVMs must not trust the host (see Why AVF?), the virtual machine it configures can't be trusted either. Furthermore, even though the isolation mentioned above allows pVMs to protect their secrets from the host, it does not help with provisioning them during boot. In particular, the threat model would prohibit the host from ever having access to those secrets, preventing the VMM from passing them to the pVM.

To address these concerns the hypervisor securely loads the pVM firmware (“pvmfw”) in the pVM from a protected memory region (this prevents the host or any pVM from tampering with it), setting it as the entry point of the virtual machine. As a result, pvmfw becomes the very first code that gets executed in the pVM, allowing it to validate the environment and abort the boot sequence if necessary. This process takes place whenever the VMM places a VM in protected mode and can’t be prevented by the host.

Given the threat model, pvmfw is not allowed to trust the devices or device layout provided by the virtual platform it is running on as those are configured by the VMM. Instead, it performs all the necessary checks to ensure that the pVM was set up as expected. For functional purposes, the interface with the hypervisor, although trusted, is also validated.

Once it has been determined that the platform can be trusted, pvmfw derives unique secrets for the guest through the DICE Chain (see Open Profile for DICE) that can be used to prove the identity of the pVM to local and remote actors. If any operation or check fails, or in case of a missing prerequisite, pvmfw will abort the boot process of the pVM, effectively preventing non-compliant pVMs and/or guests from running. Otherwise, it hands over the pVM to the guest kernel by jumping to its first instruction, similarly to a bootloader.

pvmfw currently only supports AArch64.

Integration

pvmfw Loading

When running pKVM, the physical memory from which the hypervisor loads pvmfw into guest address space is not initially populated by the hypervisor itself. Instead, it receives a pre-loaded memory region from a trusted pvmfw loader and only then becomes responsible for protecting it. As a result, the hypervisor is kept generic (beyond AVF) and small as it is not expected (nor necessary) for it to know how to interpret or obtain the content of that region.

Android Bootloader (ABL) Support

Starting in Android T, the PRODUCT_BUILD_PVMFW_IMAGE build variable controls the generation of pvmfw.img, a new ABL partition containing the pvmfw binary (sometimes called “pvmfw.bin”) and following the internal format of the boot partition, intended to be verified and loaded by ABL on AVF-compatible devices.

Once ABL has verified the pvmfw.img chained static partition, the contained boot.img header may be used to obtain the size of the pvmfw.bin image (recorded in the kernel_size field), as it already does for the kernel itself. In accordance with the header format, the kernel_size bytes of the partition following the header will be the pvmfw.bin image.

Note that when it gets executed in the context of a pVM, pvmfw expects to have been loaded at 4KiB-aligned intermediate physical address (IPA) so if ABL loads the pvmfw.bin image without respecting this alignment, it is the responsibility of the hypervisor to either reject the image or copy it into guest address space with the right alignment.

To support pKVM, ABL is expected to describe the region using a reserved memory device tree node where both address and size have been properly aligned to the page size used by the hypervisor. This single region must include both the pvmfw binary image and its configuration data (see below). For example, the following node describes a region of size 0x40000 at address 0x80000000:

reserved-memory {
    ...
    pkvm_guest_firmware {
        compatible = "linux,pkvm-guest-firmware-memory";
        reg = <0x0 0x80000000 0x40000>;
        no-map;
    }
}

Configuration Data

As part of the process of loading pvmfw, the loader (typically the Android Bootloader, “ABL”) is expected to pass device-specific pvmfw configuration data by appending it to the pvmfw binary and including it in the region passed to the hypervisor. As a result, the hypervisor will give the same protection to this data as it does to pvmfw and will transparently load it in guest memory, making it available to pvmfw at runtime. This enables pvmfw to be kept device-agnostic, simplifying its adoption and distribution as a centralized signed binary, while also being able to support device-specific details.

The configuration data will be read by pvmfw at the next 4KiB boundary from the end of its loaded binary. Even if the pvmfw is position-independent, it will be expected for it to also have been loaded at a 4-KiB boundary. As a result, the location of the configuration data is implicitly passed to pvmfw and known to it at build time.

Configuration Data Format

The configuration data is described using the following header:

+===============================+
|          pvmfw.bin            |
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
|  (Padding to 4KiB alignment)  |
+===============================+ <-- HEAD
|      Magic (= 0x666d7670)     |
+-------------------------------+
|           Version             |
+-------------------------------+
|   Total Size = (TAIL - HEAD)  |
+-------------------------------+
|            Flags              |
+-------------------------------+
|           [Entry 0]           |
|  offset = (FIRST - HEAD)      |
|  size = (FIRST_END - FIRST)   |
+-------------------------------+
|           [Entry 1]           |
|  offset = (SECOND - HEAD)     |
|  size = (SECOND_END - SECOND) |
+-------------------------------+
|           [Entry 2]           | <-- Entry 2 is present since version 1.1
|  offset = (THIRD - HEAD)      |
|  size = (THIRD_END - THIRD)   |
+-------------------------------+
|           [Entry 3]           | <-- Entry 3 is present since version 1.2
|  offset = (FOURTH - HEAD)     |
|  size = (FOURTH_END - FOURTH) |
+-------------------------------+
|              ...              |
+-------------------------------+
|           [Entry n]           |
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+
| (Padding to 8-byte alignment) |
+===============================+ <-- FIRST
|   {First blob: DICE chain}    |
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+ <-- FIRST_END
| (Padding to 8-byte alignment) |
+===============================+ <-- SECOND
|       {Second blob: DP}       |
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+ <-- SECOND_END
| (Padding to 8-byte alignment) |
+===============================+ <-- THIRD
|     {Third blob: VM DTBO}     |
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+ <-- THIRD_END
| (Padding to 8-byte alignment) |
+===============================+ <-- FOURTH
| {Fourth blob: VM reference DT}|
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+ <-- FOURTH_END
| (Padding to 8-byte alignment) |
+===============================+
|              ...              |
+===============================+ <-- TAIL

Where the version number is encoded using a “major.minor” as follows

((major << 16) | (minor & 0xffff))

and defines the format of the header (which may change between major versions), its size and, in particular, the expected number of appended blobs. Each blob is referred to by its offset in the entry array and may be mandatory or optional (as defined by this specification), where missing entries are denoted by a zero size. It is therefore not allowed to trim missing optional entries from the end of the array. The header uses the endianness of the virtual machine.

The header format itself is agnostic of the internal format of the individual blos it refers to.

Version 1.0

In version 1.0, it describes two blobs:

  • entry 0 must point to a valid DICE chain handover (see below)
  • entry 1 may point to a DTBO to be applied to the pVM device tree. See debug policy for an example.
Version 1.1

In version 1.1, a third blob is added.

  • entry 2 may point to a DTBO that describes VM DA DTBO for device assignment. pvmfw will provision assigned devices with the VM DTBO.

Version 1.2

In version 1.2, a fourth blob is added.

  • entry 3 if present contains the VM reference DT. This defines properties that may be included in the device tree passed to a protected VM. pvmfw validates that if any of these properties is included in the VM's device tree, the property value exactly matches what is in the VM reference DT.

    The bootloader should ensure that the same properties, with the same values, are added under the “/avf/reference” node in the host Android device tree.

    This provides a mechanism to allow configuration information to be securely passed to the VM via the host. pvmfw does not interpret the content of VM reference DT, nor does it apply it to the VM's device tree, it just ensures that if matching properties are present in the VM device tree they contain the correct values.

    Use-cases of VM reference DT include:

Virtual Platform DICE Chain Handover

The format of the DICE chain entry mentioned above, compatible with the AndroidDiceHandover defined by the Open Profile for DICE reference implementation, is described by the following CDDL:

PvmfwDiceHandover = {
  1 : bstr .size 32,     ; CDI_Attest
  2 : bstr .size 32,     ; CDI_Seal
  3 : DiceCertChain,     ; Android DICE chain
}

It contains the Compound Device Identifiers (CDIs), used for deriving the next-stage secret, and a certificate chain, necessary for building the full pVM DICE chain required by features like pVM remote attestation.

Note that it differs from the AndroidDiceHandover defined by the specification in that its DiceCertChain field is mandatory (while optional in the original).

Devices that fully implement DICE should provide a certificate rooted at the Unique Device Secret (UDS) in a boot stage preceding the pvmfw loader (typically ABL), in such a way that it would receive a valid AndroidDiceHandover, that can be passed to DiceAndroidHandoverMainFlow along with the inputs described below.

The recommended DICE inputs at this stage are:

  • Code: hash of the pvmfw image, hypervisor (boot.img), and other target code relevant to the secure execution of pvmfw (e.g. vendor_boot.img)
  • Configuration Data: any extra input relevant to pvmfw security
  • Authority Data: must cover all the public keys used to sign and verify the code contributing to the Code input
  • Mode Decision: Set according to the specification. In particular, should only be Normal if secure boot is being properly enforced (e.g. locked device in Android Verified Boot)
  • Hidden Inputs: Factory Reset Secret (FRS, stored in a tamper evident storage and changes during every factory reset) or similar that changes as part of the device lifecycle (e.g. reset)

The resulting AndroidDiceHandover is then used by pvmfw in a similar way to derive another DICE layer, passed to the guest through a /reserved-memory device tree node marked as compatible=”google,open-dice”.

Platform Requirements

pvmfw is intended to run in a virtualized environment according to the crosvm memory layout for protected VMs and so it expects to have been loaded at address 0x7fc0_0000 and uses the 2MiB region at address 0x7fe0_0000 as scratch memory. It makes use of the virtual PCI bus to obtain a virtio interface to the host and prints its logs through the 16550 UART (address 0x3f8).

At boot, pvmfw discovers the running hypervisor in order to select the appropriate hypervisor calls to share/unshare memory, mark IPA regions as MMIO, obtain trusted true entropy, and reboot the virtual machine. In particular, it makes use of the following hypervisor calls:

  • Arm SMC Calling Convention v1.1 or above:

    • SMCCC_VERSION
    • Vendor Specific Hypervisor Service Call UID Query
  • Arm Power State Coordination Interface v1.0 or above:

    • PSCI_VERSION
    • PSCI_FEATURES
    • PSCI_SYSTEM_RESET
    • PSCI_SYSTEM_SHUTDOWN
  • Arm True Random Number Generator Firmware Interface v1.0:

    • TRNG_VERSION
    • TRNG_FEATURES
    • TRNG_RND
  • When running under KVM, the pKVM-specific hypervisor interface must provide:

    • MEMINFO (function ID 0xc6000002)
    • MEM_SHARE (function ID 0xc6000003)
    • MEM_UNSHARE (function ID 0xc6000004)
    • MMIO_GUARD_INFO (function ID 0xc6000005)
    • MMIO_GUARD_ENROLL (function ID 0xc6000006)
    • MMIO_GUARD_MAP (function ID 0xc6000007)
    • MMIO_GUARD_UNMAP (function ID 0xc6000008)

Booting Protected Virtual Machines

Boot Protocol

As the hypervisor makes pvmfw the entry point of the VM, the initial value of the registers it receives is configured by the VMM and is expected to follow the Linux ABI i.e.

  • x0 = physical address of device tree blob (dtb) in system RAM.
  • x1 = 0 (reserved for future use)
  • x2 = 0 (reserved for future use)
  • x3 = 0 (reserved for future use)

Images to be verified, which have been loaded to guest memory by the VMM prior to booting the VM, are described to pvmfw using the device tree (x0):

  • the kernel in the /config DT node e.g.

    / {
        config {
            kernel-address = <0x80200000>;
            kernel-size = <0x1000000>;
        };
    };
    
  • the (optional) ramdisk in the standard /chosen node e.g.

    / {
        chosen {
            linux,initrd-start = <0x82000000>;
            linux,initrd-end = <0x82800000>;
        };
    };
    

Handover ABI

After verifying the guest kernel, pvmfw boots it using the Linux ABI described above. It uses the device tree to pass AVF-specific properties and the DICE chain:

/ {
    reserved-memory {
        #address-cells = <0x02>;
        #size-cells = <0x02>;
        ranges;
        dice {
            compatible = "google,open-dice";
            no-map;
            reg = <0x0 0x7fe0000>, <0x0 0x1000>;
        };
    };
};

Guest Image Signing

pvmfw verifies the guest kernel image (loaded by the VMM) by re-using tools and formats introduced by the Android Verified Boot. In particular, it expects the kernel region (see /config/kernel-{address,size} described above) to contain an appended VBMeta structure, which can be generated as follows:

avbtool add_hash_footer --image <kernel.bin> \
    --partition_name boot \
    --dynamic_partition_size \
    --key $KEY

In cases where a ramdisk is required by the guest, pvmfw must also verify it. To do so, it must be covered by a hash descriptor in the VBMeta of the kernel:

cp <initrd.bin> /tmp/
avbtool add_hash_footer --image /tmp/<initrd.bin> \
    --partition_name $INITRD_NAME \
    --dynamic_partition_size \
    --key $KEY
avbtool add_hash_footer --image <kernel.bin> \
    --partition_name boot \
    --dynamic_partition_size \
    --include_descriptor_from_image /tmp/<initrd.bin> \
    --key $KEY

Note that the /tmp/<initrd.bin> file is only created to temporarily hold the hash descriptor to be added to the kernel footer and that the unsigned <initrd.bin> should be passed to the VMM when booting a pVM.

The name of the AVB “partition” for the ramdisk ($INITRD_NAME) can be used by the signer to specify if pvmfw must consider the guest to be debuggable (initrd_debug) or not (initrd_normal), which will be reflected in the certificate of the guest and will affect the secrets being provisioned.

If pVM guest kernels are built and/or packaged using the Android Build system, the signing described above is recommended to be done through an avb_add_hash_footer Soong module (see how we sign the Microdroid kernel).

Development

For faster iteration, you can build pvmfw, adb-push it to the device, and use it directly for a new pVM, without having to flash it to the physical partition. To do that, the binary image composition performed by ABL described above must be replicated to produce a single file containing the pvmfw binary and its configuration data.

As a quick prototyping solution, a valid DICE chain (such as this test file) can be appended to the pvmfw.bin image with pvmfw-tool.

m pvmfw-tool pvmfw_bin
PVMFW_BIN=${ANDROID_PRODUCT_OUT}/system/etc/pvmfw.bin
DICE=${ANDROID_BUILD_TOP}/packages/modules/Virtualization/tests/pvmfw/assets/bcc.dat

pvmfw-tool custom_pvmfw ${PVMFW_BIN} ${DICE}

The result can then be pushed to the device. Pointing the system property hypervisor.pvmfw.path to it will cause AVF to use that image as pvmfw:

adb push custom_pvmfw /data/local/tmp/pvmfw
adb root
adb shell setprop hypervisor.pvmfw.path /data/local/tmp/pvmfw

Then run a protected VM, for example:

adb shell /apex/com.android.virt/bin/vm run-microdroid --protected

Note: adb root is required to set the system property.