blob: 7a7029f8ca01da3062aaaf841239095b5d6864d9 [file] [log] [blame]
//
// Copyright 2015 Google, Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at:
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//
#include "service/low_energy_advertiser.h"
#include "service/adapter.h"
#include "service/logging_helpers.h"
#include "stack/include/bt_types.h"
#include <base/bind.h>
#include <base/callback.h>
#include <base/logging.h>
#include "bind_helpers.h"
using std::lock_guard;
using std::mutex;
namespace bluetooth {
namespace {
BLEStatus GetBLEStatus(int status) {
if (status == BT_STATUS_FAIL) return BLE_STATUS_FAILURE;
return static_cast<BLEStatus>(status);
}
// The Bluetooth Core Specification defines time interval (e.g. Page Scan
// Interval, Advertising Interval, etc) units as 0.625 milliseconds (or 1
// Baseband slot). The HAL advertising functions expect the interval in this
// unit. This function maps an AdvertiseSettings::Mode value to the
// corresponding time unit.
int GetAdvertisingIntervalUnit(AdvertiseSettings::Mode mode) {
int ms;
switch (mode) {
case AdvertiseSettings::MODE_BALANCED:
ms = kAdvertisingIntervalMediumMs;
break;
case AdvertiseSettings::MODE_LOW_LATENCY:
ms = kAdvertisingIntervalLowMs;
break;
case AdvertiseSettings::MODE_LOW_POWER:
FALLTHROUGH_INTENDED; /* FALLTHROUGH */
default:
ms = kAdvertisingIntervalHighMs;
break;
}
// Convert milliseconds to Bluetooth units.
return (ms * 1000) / 625;
}
int8_t GetAdvertisingTxPower(AdvertiseSettings::TxPowerLevel tx_power) {
int8_t power;
switch (tx_power) {
case AdvertiseSettings::TX_POWER_LEVEL_ULTRA_LOW:
power = -21;
break;
case AdvertiseSettings::TX_POWER_LEVEL_LOW:
power = -15;
break;
case AdvertiseSettings::TX_POWER_LEVEL_MEDIUM:
power = -7;
break;
case AdvertiseSettings::TX_POWER_LEVEL_HIGH:
FALLTHROUGH_INTENDED; /* FALLTHROUGH */
default:
power = 1;
break;
}
return power;
}
void GetAdvertiseParams(const AdvertiseSettings& settings, bool has_scan_rsp,
AdvertiseParameters* out_params) {
CHECK(out_params);
out_params->min_interval = GetAdvertisingIntervalUnit(settings.mode());
out_params->max_interval =
out_params->min_interval + kAdvertisingIntervalDeltaUnit;
if (settings.connectable())
out_params->advertising_event_properties =
kAdvertisingEventTypeLegacyConnectable;
else if (has_scan_rsp)
out_params->advertising_event_properties =
kAdvertisingEventTypeLegacyScannable;
else
out_params->advertising_event_properties =
kAdvertisingEventTypeLegacyNonConnectable;
out_params->channel_map = kAdvertisingChannelAll;
out_params->tx_power = GetAdvertisingTxPower(settings.tx_power_level());
// TODO: expose those new setting through AdvertiseSettings
out_params->primary_advertising_phy = 0x01;
out_params->secondary_advertising_phy = 0x01;
out_params->scan_request_notification_enable = 0;
}
} // namespace
// LowEnergyAdvertiser implementation
LowEnergyAdvertiser::LowEnergyAdvertiser(const Uuid& uuid, int advertiser_id)
: app_identifier_(uuid),
advertiser_id_(advertiser_id),
adv_started_(false),
adv_start_callback_(nullptr),
adv_stop_callback_(nullptr) {}
LowEnergyAdvertiser::~LowEnergyAdvertiser() {
// Automatically unregister the advertiser.
VLOG(1) << "LowEnergyAdvertiser unregistering advertiser: " << advertiser_id_;
// Stop advertising and ignore the result.
hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface()->Enable(
advertiser_id_, false, base::DoNothing(), 0, 0, base::DoNothing());
hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface()->Unregister(
advertiser_id_);
}
bool LowEnergyAdvertiser::StartAdvertising(const AdvertiseSettings& settings,
const AdvertiseData& advertise_data,
const AdvertiseData& scan_response,
const StatusCallback& callback) {
VLOG(2) << __func__;
lock_guard<mutex> lock(adv_fields_lock_);
if (IsAdvertisingStarted()) {
LOG(WARNING) << "Already advertising";
return false;
}
if (IsStartingAdvertising()) {
LOG(WARNING) << "StartAdvertising already pending";
return false;
}
if (!advertise_data.IsValid()) {
LOG(ERROR) << "Invalid advertising data";
return false;
}
if (!scan_response.IsValid()) {
LOG(ERROR) << "Invalid scan response data";
return false;
}
advertise_settings_ = settings;
AdvertiseParameters params;
GetAdvertiseParams(settings, !scan_response.data().empty(), &params);
hal::BluetoothGattInterface::Get()
->GetAdvertiserHALInterface()
->StartAdvertising(
advertiser_id_,
base::Bind(&LowEnergyAdvertiser::EnableCallback,
base::Unretained(this), true, advertiser_id_),
params, advertise_data.data(), scan_response.data(),
settings.timeout().InSeconds(),
base::Bind(&LowEnergyAdvertiser::EnableCallback,
base::Unretained(this), false, advertiser_id_));
;
adv_start_callback_.reset(new StatusCallback(callback));
return true;
}
bool LowEnergyAdvertiser::StopAdvertising(const StatusCallback& callback) {
VLOG(2) << __func__;
lock_guard<mutex> lock(adv_fields_lock_);
if (!IsAdvertisingStarted()) {
LOG(ERROR) << "Not advertising";
return false;
}
if (IsStoppingAdvertising()) {
LOG(ERROR) << "StopAdvertising already pending";
return false;
}
hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface()->Enable(
advertiser_id_, false,
base::Bind(&LowEnergyAdvertiser::EnableCallback, base::Unretained(this),
false, advertiser_id_),
0, 0, base::Bind(&LowEnergyAdvertiser::EnableCallback,
base::Unretained(this), false, advertiser_id_));
// OK to set this at the end since we're still holding |adv_fields_lock_|.
adv_stop_callback_.reset(new StatusCallback(callback));
return true;
}
bool LowEnergyAdvertiser::IsAdvertisingStarted() const {
return adv_started_.load();
}
bool LowEnergyAdvertiser::IsStartingAdvertising() const {
return !IsAdvertisingStarted() && adv_start_callback_;
}
bool LowEnergyAdvertiser::IsStoppingAdvertising() const {
return IsAdvertisingStarted() && adv_stop_callback_;
}
const Uuid& LowEnergyAdvertiser::GetAppIdentifier() const {
return app_identifier_;
}
int LowEnergyAdvertiser::GetInstanceId() const { return advertiser_id_; }
void LowEnergyAdvertiser::EnableCallback(bool enable, uint8_t advertiser_id,
uint8_t status) {
if (advertiser_id != advertiser_id_) return;
lock_guard<mutex> lock(adv_fields_lock_);
VLOG(1) << __func__ << "advertiser_id: " << advertiser_id
<< " status: " << status << " enable: " << enable;
if (enable) {
CHECK(adv_start_callback_);
CHECK(!adv_stop_callback_);
// Terminate operation in case of error.
if (status != BT_STATUS_SUCCESS) {
LOG(ERROR) << "Failed to enable multi-advertising";
InvokeAndClearStartCallback(GetBLEStatus(status));
return;
}
// All pending tasks are complete. Report success.
adv_started_ = true;
InvokeAndClearStartCallback(BLE_STATUS_SUCCESS);
} else {
CHECK(!adv_start_callback_);
CHECK(adv_stop_callback_);
if (status == BT_STATUS_SUCCESS) {
VLOG(1) << "Multi-advertising stopped for advertiser_id: "
<< advertiser_id;
adv_started_ = false;
} else {
LOG(ERROR) << "Failed to stop multi-advertising";
}
InvokeAndClearStopCallback(GetBLEStatus(status));
}
}
void LowEnergyAdvertiser::InvokeAndClearStartCallback(BLEStatus status) {
// We allow NULL callbacks.
if (*adv_start_callback_) (*adv_start_callback_)(status);
adv_start_callback_ = nullptr;
}
void LowEnergyAdvertiser::InvokeAndClearStopCallback(BLEStatus status) {
// We allow NULL callbacks.
if (*adv_stop_callback_) (*adv_stop_callback_)(status);
adv_stop_callback_ = nullptr;
}
// LowEnergyAdvertiserFactory implementation
LowEnergyAdvertiserFactory::LowEnergyAdvertiserFactory() {}
LowEnergyAdvertiserFactory::~LowEnergyAdvertiserFactory() {}
bool LowEnergyAdvertiserFactory::RegisterInstance(
const Uuid& app_uuid, const RegisterCallback& callback) {
VLOG(1) << __func__;
lock_guard<mutex> lock(pending_calls_lock_);
if (pending_calls_.find(app_uuid) != pending_calls_.end()) {
LOG(ERROR) << "Low-Energy advertiser with given Uuid already registered - "
<< "Uuid: " << app_uuid.ToString();
return false;
}
BleAdvertiserInterface* hal_iface =
hal::BluetoothGattInterface::Get()->GetAdvertiserHALInterface();
VLOG(1) << __func__ << " calling register!";
hal_iface->RegisterAdvertiser(
base::Bind(&LowEnergyAdvertiserFactory::RegisterAdvertiserCallback,
base::Unretained(this), callback, app_uuid));
VLOG(1) << __func__ << " call finished!";
pending_calls_.insert(app_uuid);
return true;
}
void LowEnergyAdvertiserFactory::RegisterAdvertiserCallback(
const RegisterCallback& callback, const Uuid& app_uuid,
uint8_t advertiser_id, uint8_t status) {
VLOG(1) << __func__;
lock_guard<mutex> lock(pending_calls_lock_);
auto iter = pending_calls_.find(app_uuid);
if (iter == pending_calls_.end()) {
VLOG(1) << "Ignoring callback for unknown app_id: " << app_uuid.ToString();
return;
}
// No need to construct a advertiser if the call wasn't successful.
std::unique_ptr<LowEnergyAdvertiser> advertiser;
BLEStatus result = BLE_STATUS_FAILURE;
if (status == BT_STATUS_SUCCESS) {
advertiser.reset(new LowEnergyAdvertiser(app_uuid, advertiser_id));
result = BLE_STATUS_SUCCESS;
}
// Notify the result via the result callback.
callback(result, app_uuid, std::move(advertiser));
pending_calls_.erase(iter);
}
} // namespace bluetooth