res/values/strings.xml

<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (C) 2007 The Android Open Source Project

     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
     You may obtain a copy of the License at

          http://www.apache.org/licenses/LICENSE-2.0

     Unless required by applicable law or agreed to in writing, software
     distributed under the License is distributed on an "AS IS" BASIS,
     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
     See the License for the specific language governing permissions and
     limitations under the License.
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
    <!-- Strings for Dialog yes button -->
    <string name="yes">"Yes"</string>
    <!-- Strings for Dialog no button -->
    <string name="no">"No"</string>
    <!-- Strings for Dialog create button -->
    <string name="create">Create</string>
    <!-- Strings for Dialog allow button -->
    <string name="allow">Allow</string>
    <!-- Strings for Dialog deny button -->
    <string name="deny">Deny</string>

    <!-- Strings for Dialog close button [CHAR LIMIT=20] -->
    <string name="dlg_close">Close</string>
    <!-- Strings for Dialog switch button [CHAR LIMIT=20] -->
    <string name="dlg_switch">Switch</string>

    <!-- Device Info --> <skip />
    <!-- Device Info screen. Used for a status item's value when the proper value is not known -->
    <string name="device_info_default">Unknown</string>
    <!-- [CHAR LIMIT=NONE] Device Info screen. Countdown for user taps to enable development settings -->
    <plurals name="show_dev_countdown">
        <item quantity="one">You are now <xliff:g id="step_count">%1$d</xliff:g> step away from being a developer.</item>
        <item quantity="other">You are now <xliff:g id="step_count">%1$d</xliff:g> steps away from being a developer.</item>
    </plurals>
    <!-- [CHAR LIMIT=NONE] Device Info screen. Confirmation that developer settings are enabled -->
    <string name="show_dev_on">You are now a developer!</string>
    <!-- [CHAR LIMIT=NONE] Device Info screen. Okay we get it, stop pressing, you already have it on -->
    <string name="show_dev_already">No need, you are already a developer.</string>

    <!-- [CHAR LIMIT=NONE] Toast message when user attemps to launch developer otions before enabling it. -->
    <string name="dev_settings_disabled_warning">Please enable developer options first.</string>

    <!-- Category headings in left-pane header menu --> <skip />
    <!-- Settings main menu category heading. Wireless and networks (Wi-Fi, Bluetooth, data usage...). [CHAR LIMIT=40] -->
    <string name="header_category_wireless_networks">Wireless &amp; networks</string>
    <!-- Settings main menu category heading. Wireless and networks (Wi-Fi, Bluetooth, data usage...). [CHAR LIMIT=40] -->
    <string name="header_category_connections">Connections</string>
    <!-- Settings main menu category heading. Device (Sound, display, battery, applications...). [CHAR LIMIT=40] -->
    <string name="header_category_device">Device</string>
    <!-- Settings main menu category heading. Personal (Accounts, security, language, backup...). [CHAR LIMIT=40] -->
    <string name="header_category_personal">Personal</string>
    <!-- Settings main menu category heading. Personal (Accounts, security, language, backup...). [CHAR LIMIT=40] -->
    <string name="header_category_access">Access</string>
    <!-- Settings main menu category heading. System (Updates, data, accessibility, about phone). [CHAR LIMIT=40] -->
    <string name="header_category_system">System</string>

    <!-- Data Connection Enable. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="radio_info_data_connection_enable">Enable Data Connection</string>
    <!-- Data Connection Disable. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="radio_info_data_connection_disable">Disable Data Connection</string>

    <!-- VoLTE provisioning flag on. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="volte_provisioned_switch_string">VoLTE Provisioned</string>

    <!-- Video calling provisioning flag on. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="vt_provisioned_switch_string">Video Calling Provisioned</string>

    <!-- Wifi Calling provisioning flag on. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="wfc_provisioned_switch_string">Wifi Calling Provisioned</string>

    <!-- EAB provisioning flag on. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="eab_provisioned_switch_string">EAB/Presence Provisioned</string>

    <!-- Title for controlling on/off for Mobile phone's radio power. Only shown in diagnostic screen, so precise translation is not needed. -->
    <string name="radio_info_radio_power">Mobile Radio Power</string>

    <!-- Phone Info screen. Menu item label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_menu_viewADN">View SIM Address Book</string>
    <!-- Phone Info screen. Menu item label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_menu_viewFDN">View Fixed Dialing Numbers</string>
    <!-- Phone Info screen. Menu item label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_menu_viewSDN">View Service Dialing Numbers</string>
    <!-- Phone Info screen. Menu item label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_menu_getIMS">IMS Service Status</string>

    <!-- Phone Info screen. IMS Registration Title.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ims_reg_status_title">IMS Status</string>

    <!-- Phone Info screen. IMS Status - Registered.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ims_reg_status_registered">Registered</string>
    <!-- Phone Info screen. Ims Status - Unregistered.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ims_reg_status_not_registered">Not Registered</string>

    <!-- Phone Info screen. Ims Feature Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ims_feature_status_available">Available</string>
    <!-- Phone Info screen. Ims Feature status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ims_feature_status_unavailable">Unavailable</string>

    <!-- Phone Info screen. IMS Registration.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ims_reg_status">IMS Registration: <xliff:g id="status" example="registered">%1$s</xliff:g>\u000AVoice over LTE: <xliff:g id="availability" example="available">%2$s</xliff:g>\u000AVoice over WiFi: <xliff:g id="availability" example="available">%3$s</xliff:g>\u000AVideo Calling: <xliff:g id="availability" example="available">%4$s</xliff:g>\u000AUT Interface: <xliff:g id="availability" example="available">%5$s</xliff:g></string>

    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_service_in">In Service</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_service_out">Out of Service</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_service_emergency">Emergency Calls Only</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_service_off">Radio Off</string>

    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_roaming_in">Roaming</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_roaming_not">Not Roaming</string>

    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_phone_idle">Idle</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_phone_ringing">Ringing</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_phone_offhook">Call in Progress</string>

    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_data_disconnected">Disconnected</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_data_connecting">Connecting</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_data_connected">Connected</string>
    <!-- Phone Info screen. Status label.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_data_suspended">Suspended</string>

    <!-- Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_unknown">Unknown</string>
    <!-- Phone Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_display_packets">pkts</string>
    <!-- Phone Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_display_bytes">bytes</string>
    <!-- Phone Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_display_dbm">dBm</string>
    <!-- Phone Info screen. Units shown after a value.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_display_asu">asu</string>
    <!-- Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_lac">LAC</string>
    <!-- Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radioInfo_cid">CID</string>

    <!-- Used for diagnostic info screens, precise translation isn't needed. Unmounts the SD card from the phone, meaning it will become available for an attached computer  [CHAR LIMIT=25] -->
    <string name="sdcard_unmount" product="nosdcard">Unmount USB storage</string>
    <!-- Used for diagnostic info screens, precise translation isn't needed. Unmounts the SD card from the phone, meaning it will become available for an attached computer  -->
    <string name="sdcard_unmount" product="default">Unmount SD card</string>

    <!-- Used for diagnostic info screens, precise translation isn't needed. Formats the SD card in the phone, meaning it will be erased and reformatted [CHAR LIMIT=25] -->
    <string name="sdcard_format" product="nosdcard">Erase USB storage</string>
    <!-- Used for diagnostic info screens, precise translation isn't needed. Formats the SD card in the phone, meaning it will be erased and reformatted -->
    <string name="sdcard_format" product="default">Erase SD card</string>

    <!-- Content description for preview pager. [CHAR LIMIT=NONE] -->
    <string name="preview_pager_content_description">Preview</string>
    <!-- Content description for dot pager indicator for preview pager. [CHAR LIMIT=NONE] -->
    <string name="preview_page_indicator_content_description">Preview, page <xliff:g id="current_page" example="3">%1$d</xliff:g> of <xliff:g id="num_pages" example="9">%2$d</xliff:g></string>

    <!-- Summary of font size setting screen. [CHAR LIMIT=NONE] -->
    <string name="font_size_summary">Make the text on screen smaller or larger.</string>

    <!-- Description for the button that makes interface elements smaller. [CHAR_LIMIT=NONE] -->
    <string name="font_size_make_smaller_desc">Make smaller</string>
    <!-- Description for the button that makes interface elements larger. [CHAR_LIMIT=NONE] -->
    <string name="font_size_make_larger_desc">Make larger</string>

    <!-- Sample text for font size preview. -->
    <string name="font_size_preview_text">Servez à ce monsieur une bière et des kiwis.</string>
    <string name="font_size_preview_text_headline">Sample text</string>
    <string name="font_size_preview_text_title"
            translation_description="Title text in sample text used to illustrate how the currently selected font size will appear to the user. NOTE: Translate manually. No not adopt any copyrighted material for translation.">
        The Wonderful Wizard of Oz
    </string>
    <string name="font_size_preview_text_subtitle"
            translation_description="Subtitle text in sample text used to illustrate how the currently selected font size will appear to the user. NOTE: Translate manually. No not adopt any copyrighted material for translation.">
        Chapter 11: The Wonderful Emerald City of Oz</string>
    <string name="font_size_preview_text_body"
            translation_description="Text in sample text used to illustrate how the currently selected font size will appear to the user. NOTE: Translate manually. No not adopt any copyrighted material for translation.">
        Even with eyes protected by the green spectacles Dorothy and her friends were at first dazzled by the brilliancy of the wonderful City.
        The streets were lined with beautiful houses all built of green marble and studded everywhere with sparkling emeralds.
        They walked over a pavement of the same green marble, and where the blocks were joined together were rows of emeralds, set closely, and glittering in the brightness of the sun.
        The window panes were of green glass; even the sky above the City had a green tint, and the rays of the sun were green.
        \n\nThere were many people, men, women and children, walking about, and these were all dressed in green clothes and had greenish skins.
        They looked at Dorothy and her strangely assorted company with wondering eyes, and the children all ran away and hid behind their mothers when they saw the Lion; but no one spoke to them.
        Many shops stood in the street, and Dorothy saw that everything in them was green.
        Green candy and green pop-corn were offered for sale, as well as green shoes, green hats and green clothes of all sorts.
        At one place a man was selling green lemonade, and when the children bought it Dorothy could see that they paid for it with green pennies.
        \n\nThere seemed to be no horses nor animals of any kind; the men carried things around in little green carts, which they pushed before them.
        Everyone seeemed happy and contented and prosperous.
    </string>
    <!-- Button. Chosen when they want to save the chosen text size. -->
    <string name="font_size_save">OK</string>

    <!-- Title for a notification shown. [CHAR LIMIT=25] -->
    <string name="sdcard_setting" product="nosdcard">USB storage</string>
    <!-- Title for a notification shown. -->
    <string name="sdcard_setting" product="default">SD card</string>

    <!-- Used as setting title (for checkbox) on second screen after selecting Bluetooth settings -->
    <string name="bluetooth">Bluetooth</string>
    <!-- Bluetooth settings screen, summary after selecting Discoverable check box [CHAR LIMIT=50] -->
    <string name="bluetooth_is_discoverable">Visible to all nearby Bluetooth devices (<xliff:g id="discoverable_time_period">%1$s</xliff:g>)</string>
    <!-- Bluetooth settings screen, summary when Discoverable duration is set to "forever" [CHAR LIMIT=50] -->
    <string name="bluetooth_is_discoverable_always">Visible to all nearby Bluetooth devices</string>
    <!-- Bluetooth settings screen, summary text when not discoverable and no paired devices [CHAR LIMIT=50] -->
    <string name="bluetooth_not_visible_to_other_devices">Not visible to other Bluetooth devices</string>
    <!-- Bluetooth settings screen, summary text when not discoverable with paired devices [CHAR LIMIT=50] -->
    <string name="bluetooth_only_visible_to_paired_devices">Only visible to paired devices</string>
    <!-- Bluetooth settings screen, option name to pick discoverability timeout duration (a list dialog comes up) -->
    <string name="bluetooth_visibility_timeout">Visibility timeout</string>
    <!-- Bluetooth settings screen, check box label whether or not to allow
        bluetooth voice dialing when lock screen is up-->
    <string name="bluetooth_lock_voice_dialing">Lock voice dialing</string>
    <!-- Bluetooth settings screen, lock voice dialing checkbox summary text -->
    <string name="bluetooth_lock_voice_dialing_summary">
      Prevent use of the bluetooth dialer when the screen is locked
    </string>
    <!-- Bluetooth settings screen, heading above the list of nearby bluetooth devices -->
    <string name="bluetooth_devices">Bluetooth devices</string>
    <!-- Bluetooth settings screen, title for the current bluetooth name setting -->
    <string name="bluetooth_device_name">Device name</string>
    <!-- Bluetooth settings screen, image description for device details button. This opens the screen to rename, unpair, etc. a single device. -->
    <string name="bluetooth_device_details">Device settings</string>
    <!-- Bluetooth settings screen, image description for profile of a device details button. -->
    <string name="bluetooth_profile_details">Profile settings</string>
    <!-- Bluetooth settings screen, summary text when there isn't a name set (for the name setting) -->
    <string name="bluetooth_name_not_set">No name set, using account name</string>
    <!-- Bluetooth settings screen, menu item to scan for nearby bluetooth devices -->
    <string name="bluetooth_scan_for_devices">Scan for devices</string>
    <!-- Bluetooth settings screen, menu item to change this device's Bluetooth name. [CHAR LIMIT=30] -->
    <string name="bluetooth_rename_device">Rename this device</string>
    <!-- Bluetooth settings screen, confirmation button for rename device dialog. [CHAR LIMIT=20] -->
    <string name="bluetooth_rename_button">Rename</string>
    <!-- Bluetooth settings.  Dialog title to confirm disconnecting from all profiles of a device. [CHAR LIMIT=30] -->
    <string name="bluetooth_disconnect_title">Disconnect device?</string>
    <!-- Bluetooth settings.  Message for disconnecting from all profiles of a bluetooth device. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_disconnect_all_profiles" product="default">Your phone will disconnect from "<xliff:g id="device_name">%1$s</xliff:g>."</string>
    <!-- Bluetooth settings.  Message for disconnecting from all profiles of a bluetooth device. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_disconnect_all_profiles" product="tablet">Your tablet will disconnect from "<xliff:g id="device_name">%1$s</xliff:g>."</string>
    <!-- Bluetooth settings.  Message for disconnecting from all profiles of a bluetooth device. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_disconnect_all_profiles" product="device">Your device will disconnect from "<xliff:g id="device_name">%1$s</xliff:g>."</string>
    <!-- dialog ok button for disconnect dialog [CHAR LIMIT=20] -->
    <string name="bluetooth_disconnect_dialog_ok">Disconnect</string>
    <!-- Bluetooth Settings. text displayed when user has restriction DISALLOW_CONFIG_BLUETOOTH [CHAR LIMIT=NONE]-->
    <string name="bluetooth_empty_list_user_restricted">You don\u2019t have permission to change Bluetooth settings.</string>
    <!-- Title for bluetooth pairing item [CHAR LIMIT=60] -->
    <string name="bluetooth_pairing_pref_title">Pair new device</string>

    <!-- Bluetooth Visibility message.  This message informs the user that their device is now visible to other bluetooth devices.  [CHAR LIMIT=NONE] -->
    <string name="bluetooth_is_visible_message"><xliff:g id="device_name">%1$s</xliff:g> is visible to nearby devices while Bluetooth settings is open.</string>
    <!-- Bluetooth mac address message.  This message shows the bluetooth mac address for this device.  [CHAR LIMIT=120] -->
    <string name="bluetooth_footer_mac_message" product="default">Phone\'s Bluetooth address: <xliff:g id="bluetooth_mac_address">%1$s</xliff:g></string>
    <!-- Bluetooth mac address message.  This message shows the bluetooth mac address for this device.  [CHAR LIMIT=120] -->
    <string name="bluetooth_footer_mac_message" product="tablet">Tablet\'s Bluetooth address: <xliff:g id="bluetooth_mac_address">%1$s</xliff:g></string>
    <!-- Bluetooth mac address message.  This message shows the bluetooth mac address for this device.  [CHAR LIMIT=120] -->
    <string name="bluetooth_footer_mac_message" product="device">Device\'s Bluetooth address: <xliff:g id="bluetooth_mac_address">%1$s</xliff:g></string>

    <!-- Bluetooth Visibility disconnect question.  Asks the user if they wish to disconnect a paired bluetooth device.  [CHAR LIMIT=50] -->
    <string name="bluetooth_is_disconnect_question">Disconnect <xliff:g id="device_name">%1$s</xliff:g>?</string>
    <!-- Bluetooth broadcasting settings, option to enable/disable broadcasting -->
    <string name="bluetooth_broadcasting">Broadcasting</string>
    <!-- Bluetooth settings.  Dialog title to disable a single profile of a device. [CHAR LIMIT=40] -->
    <string name="bluetooth_disable_profile_title">Disable profile?</string>
    <!-- Bluetooth settings.  Message for disabling a profile of a bluetooth device. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_disable_profile_message">This will disable:&lt;br>&lt;b><xliff:g id="profile_name">%1$s</xliff:g>&lt;/b>&lt;br>&lt;br>From:&lt;br>&lt;b><xliff:g id="device_name">%2$s</xliff:g>&lt;/b></string>

    <!-- Bluetooth settings.  Message when the device state is unknown -->
    <string name="bluetooth_unknown" />
    <!--Bluetooth settings screen, summary text for Bluetooth device with no name -->
    <string name="bluetooth_device">Unnamed Bluetooth device</string>
    <!--Bluetooth settings screen, text that appears in heading bar when scanning for devices -->
    <string name="progress_scanning">Searching</string>
    <!--Bluetooth settings screen, text that appears when scanning for devices is finished and no nearby bluetooth device was found [CHAR LIMIT=40]-->
    <string name="bluetooth_no_devices_found">No nearby Bluetooth devices were found.</string>
    <!-- Notification ticker text (shown in the status bar) when a Bluetooth device wants to pair with us -->
    <string name="bluetooth_notif_ticker">Bluetooth pairing request</string>
    <!-- Notification title when a Bluetooth device wants to pair with us -->
    <string name="bluetooth_notif_title">Pairing request</string>
    <!-- Notification message when a Bluetooth device wants to pair with us -->
    <string name="bluetooth_notif_message">Tap to pair with <xliff:g id="device_name">%1$s</xliff:g>.</string>
    <!-- Item in bluetooth settings screen, used to show the list of received files [CHAR LIMIT=30] -->
    <string name="bluetooth_show_received_files">Received files</string>

    <!-- Strings for BluetoothDevicePicker [CHAR LIMIT=40]-->
    <string name="device_picker">Choose Bluetooth device</string>

    <!-- This string asks the user whether or not to allow an app to enable bluetooth. [CHAR LIMIT=100] -->
    <string name="bluetooth_ask_enablement"><xliff:g id="app_name">%1$s</xliff:g> wants to turn on Bluetooth</string>
    <!-- This string asks the user whether or not to allow an app to disable bluetooth. [CHAR LIMIT=100] -->
    <string name="bluetooth_ask_disablement"><xliff:g id="app_name">%1$s</xliff:g> wants to turn off Bluetooth</string>

    <!-- This string asks the user whether or not to allow an app to enable bluetooth. [CHAR LIMIT=100] -->
    <string name="bluetooth_ask_enablement_no_name">An app wants to turn on Bluetooth</string>
    <!-- This string asks the user whether or not to allow an app to disable bluetooth. [CHAR LIMIT=100] -->
    <string name="bluetooth_ask_disablement_no_name">An app wants to turn off Bluetooth</string>

    <!-- Strings for asking to the user whether to allow an app to enable discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_discovery" product="tablet"><xliff:g id="app_name">%1$s</xliff:g> wants to make your tablet visible to other Bluetooth devices for <xliff:g id="timeout">%2$d</xliff:g> seconds.</string>
    <!-- Strings for asking to the user whether to allow an app to enable discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_discovery" product="default"><xliff:g id="app_name">%1$s</xliff:g> wants to make your phone visible to other Bluetooth devices for <xliff:g id="timeout">%2$d</xliff:g> seconds.</string>

    <!-- Strings for asking to the user whether to allow an app to enable discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_discovery_no_name" product="tablet">An app wants to make your tablet visible to other Bluetooth devices for <xliff:g id="timeout">%1$d</xliff:g> seconds.</string>
    <!-- Strings for asking to the user whether to allow an app to enable discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_discovery_no_name" product="default">An app wants to make your phone visible to other Bluetooth devices for <xliff:g id="timeout">%1$d</xliff:g> seconds.</string>

    <!-- Strings for asking to the user whether to allow an app to enable lasting discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_lasting_discovery" product="tablet"><xliff:g id="app_name">%1$s</xliff:g> wants to make your tablet visible to other Bluetooth devices. You can change this later in Bluetooth settings.</string>
    <!-- Strings for asking to the user whether to allow an app to enable lasting discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_lasting_discovery" product="default"><xliff:g id="app_name">%1$s</xliff:g> wants to make your phone visible to other Bluetooth devices. You can change this later in Bluetooth settings.</string>

    <!-- Strings for asking to the user whether to allow an app to enable lasting discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_lasting_discovery_no_name" product="tablet">An app wants to make your tablet visible to other Bluetooth devices. You can change this later in Bluetooth settings.</string>
    <!-- Strings for asking to the user whether to allow an app to enable lasting discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_lasting_discovery_no_name" product="default">An app wants to make your phone visible to other Bluetooth devices. You can change this later in Bluetooth settings.</string>

    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_enablement_and_discovery" product="tablet"><xliff:g id="app_name">%1$s</xliff:g> wants to turn on Bluetooth and make your tablet visible to other devices for <xliff:g id="timeout">%2$d</xliff:g> seconds.</string>
    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_enablement_and_discovery" product="default"><xliff:g id="app_name">%1$s</xliff:g> wants to turn on Bluetooth and make your phone visible to other devices for <xliff:g id="timeout">%2$d</xliff:g> seconds.</string>

    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_enablement_and_discovery_no_name" product="tablet">An app wants to turn on Bluetooth and make your tablet visible to other devices for <xliff:g id="timeout">%1$d</xliff:g> seconds.</string>
    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_enablement_and_discovery_no_name" product="default">An app wants to turn on Bluetooth and make your phone visible to other devices for <xliff:g id="timeout">%1$d</xliff:g> seconds.</string>

    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_enablement_and_lasting_discovery" product="tablet"><xliff:g id="app_name">%1$s</xliff:g> wants to turn on Bluetooth and make your tablet visible to other devices. You can change this later in Bluetooth settings.</string>
    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_enablement_and_lasting_discovery" product="default"><xliff:g id="app_name">%1$s</xliff:g> wants to turn on Bluetooth and make your phone visible to other devices. You can change this later in Bluetooth settings.</string>

    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_enablement_and_lasting_discovery_no_name" product="tablet">An app wants to turn on Bluetooth and make your tablet visible to other devices. You can change this later in Bluetooth settings.</string>
    <!-- Strings for asking to the user whether to allow an app to enable bluetooth and discovery mode. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_ask_enablement_and_lasting_discovery_no_name" product="default">An app wants to turn on Bluetooth and make your phone visible to other devices. You can change this later in Bluetooth settings.</string>

    <!-- Strings for msg to display to user while bluetooth is turning on [CHAR LIMIT=60] -->
    <string name="bluetooth_turning_on">"Turning Bluetooth on\u2026"</string>

    <!-- Strings for msg to display to user while bluetooth is turning off [CHAR LIMIT=60] -->
    <string name="bluetooth_turning_off">"Turning Bluetooth off\u2026"</string>

    <!-- Strings for device profile auto connect setting -->
    <string name="bluetooth_auto_connect">Auto-connect</string>

    <!-- Activity label of BluetoothPermissionActivity [CHAR LIMIT=none]-->
    <string name="bluetooth_connection_permission_request">"Bluetooth connection request"</string>

    <!-- Notification message when a remote Bluetooth device wants to connect to a Bluetooth profile [CHAR LIMIT=none]-->
    <string name="bluetooth_connection_notif_message">"Tap to connect to \u0022<xliff:g id="device_name">%1$s</xliff:g>\u0022."</string>

    <!-- Bluetooth connection permission Alert Activity text [CHAR LIMIT=none]-->
    <string name="bluetooth_connection_dialog_text">"Do you want to connect to \u0022<xliff:g id="device_name">%1$s</xliff:g>\u0022?"</string>

    <!-- Activity label of BluetoothPbPermissionActivity, also used as Strings in the permission dialog [CHAR LIMIT=none] -->
    <string name="bluetooth_phonebook_request">"Phone book access request"</string>

    <!-- Bluetooth phone book permission Alert Activity text [CHAR LIMIT=none] -->
    <string name="bluetooth_pb_acceptance_dialog_text">
        <xliff:g id="device_name">%1$s</xliff:g> wants to access your contacts and call history. Give access to <xliff:g id="device_name">%2$s</xliff:g>?
    </string>

    <!-- Bluetooth phone book permission Alert Activity checkbox text [CHAR LIMIT=none] -->
    <string name="bluetooth_remember_choice">Don\u2019t ask again</string>
    <!--FIXME SHOULD BE REMOVED AND ALL LANG VERSIONS FIXED TO ABOVE NAME -->
    <string name="bluetooth_pb_remember_choice">Don\u2019t ask again</string>

    <!-- Activity label of BluetoothMessagePermissionActivity, also used as Strings in the permission dialog [CHAR LIMIT=none] -->
    <string name="bluetooth_map_request">"Message access request"</string>

    <!-- Bluetooth message permission Alert Activity text [CHAR LIMIT=none] -->
    <string name="bluetooth_map_acceptance_dialog_text">%1$s wants to access your messages. Give access to %2$s?</string>

    <!-- Activity label of BluetoothMessagePermissionActivity for SIM access profile. Also used as Strings in the permission dialog [CHAR LIMIT=none] -->
    <string name="bluetooth_sap_request">"SIM access request"</string>

    <!-- Bluetooth SIM access permission Alert Activity text [CHAR LIMIT=none] -->
    <string name="bluetooth_sap_acceptance_dialog_text"><xliff:g id="device_name">%1$s</xliff:g> wants to access your SIM card. Granting access to the SIM card will disable data connectivity on your device for the duration of the connection. Give access to <xliff:g id="device_name">%2$s?</xliff:g></string>

    <!-- Description for bluetooth device name summary [CHAR LIMIT=none] -->
    <string name="bluetooth_device_name_summary">Visible as \u201C<xliff:g id="device_name">^1</xliff:g>\u201D to other devices</string>

    <!-- Title for paired device group [CHAR LIMIT=none] -->
    <string name="bluetooth_paired_device_title">Your devices</string>
    <!-- Title for pairing bluetooth device page [CHAR LIMIT=none] -->
    <string name="bluetooth_pairing_page_title">Pair new device</string>

    <!-- Date & time settings screen title -->
    <string name="date_and_time">Date &amp; time</string>
    <!-- The title of the activity to pick a time zone. -->
    <string name="choose_timezone">Choose time zone</string>

    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_data_label"><xliff:g id="data">Data:</xliff:g></string>
    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_sendbroadcast_text">Send <xliff:g id="broadcast">broadcast</xliff:g></string>
    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_action_label"><xliff:g id="action">Action</xliff:g>:</string>
    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_startactivity_text">Start <xliff:g id="activity">activity</xliff:g></string>
    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_resource_label"><xliff:g id="resource">Resource</xliff:g>: </string>
    <!-- Used for diagnostic screens, precise translation is not necessary -->
    <string name="intent_sender_account_label">Account: </string>

    <!-- HTTP proxy settings title -->
    <string name="proxy_settings_title">Proxy</string>
    <!-- HTTP proxy settings. Button to clear the proxy box. -->
    <string name="proxy_clear_text">Clear</string>
    <!-- HTTP proxy settings. The port number label. -->
    <string name="proxy_port_label">Proxy port</string>
    <!-- HTTP proxy settings. The exclusion list label. -->
    <string name="proxy_exclusionlist_label">Bypass proxy for</string>
    <!-- HTTP proxy settings. The button to restore the defaults. -->
    <string name="proxy_defaultView_text">Restore defaults</string>
    <!-- HTTP proxy settings. The button to save. -->
    <string name="proxy_action_text">Done</string>
    <!-- HTTP proxy settings. The text field for the hostname -->
    <string name="proxy_hostname_label">Proxy hostname</string>
    <!-- HTTP proxy settings. Title if there is an error-->
    <string name="proxy_error">Attention</string>
    <!-- HTTP proxy settings. Button to get rid of error box-->
    <string name="proxy_error_dismiss">OK</string>
    <!-- HTTP proxy settings. The error if the hostname is not valid -->
    <string name="proxy_error_invalid_host">The hostname you typed isn\u2019t valid.</string>
    <!-- HTTP proxy settings. The error if the exclusion list is not valid -->
    <string name="proxy_error_invalid_exclusion_list">The exclusion list you typed isn\u2019t properly formatted. Type a comma-separated list of excluded domains.</string>
    <!-- HTTP proxy settings. Error msg -->
    <string name="proxy_error_empty_port">You need to complete the port field.</string>
    <!-- HTTP proxy settings. Error msg -->
    <string name="proxy_error_empty_host_set_port">The port field must be empty if the host field is empty.</string>
    <!-- HTTP proxy settings. Error msg -->
    <string name="proxy_error_invalid_port">The port you typed isn\u2019t valid.</string>
    <!-- HTTP proxy settings. Warning message about limited application support [CHAR LIMIT=100]-->
    <string name="proxy_warning_limited_support">The HTTP proxy is used by the browser but may not be used by the other apps.</string>

    <!-- HTTP proxy settings. Title for Proxy-Auto Config URL.  [CHAR LIMIT=25] -->
    <string name="proxy_url_title">"PAC URL: "</string>

    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_signal_location_label">Cell Location Info (deprecated):</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_neighboring_location_label">Neighbor Cell Info (deprecated):</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_cell_info_refresh_rate">Cell Info Refresh Rate:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_cellinfo_label">All Cell Measurement Info:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_dcrtinfo_label">Data Connection Real-Time Info:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_gprs_service_label">Data Service:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_roaming_label">Roaming:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_imei_label">IMEI:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, DO NOT TRANSLATE. -->
    <string name="radio_info_imsi_label">IMSI:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_call_redirect_label">Call Redirect:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ppp_resets_label">Number of PPP Reset Since Boot:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_current_network_label">Current Network:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ppp_received_label">Data Received:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_gsm_service_label">Voice Service:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_signal_strength_label">Signal Strength:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_call_status_label">Voice Call Status:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ppp_sent_label">Data Sent:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_message_waiting_label">Message Waiting:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_phone_number_label">Phone Number:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_band_mode_label">Select Radio Band</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_voice_network_type_label">Voice Network Type:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_data_network_type_label">Data Network Type:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_set_perferred_label">Set Preferred Network Type:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ping_hostname_v4">Ping Hostname(www.google.com) IPv4:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_ping_hostname_v6">Ping Hostname(www.google.com) IPv6:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_http_client_test">HTTP Client Test:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="ping_test_label">Run Ping Test</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_smsc_label">SMSC:</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_smsc_update_label">Update</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_smsc_refresh_label">Refresh</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="radio_info_toggle_dns_check_label">Toggle DNS Check</string>
    <!-- Radio Info screen. Label for a status item.  Used for diagnostic info screens, precise translation isn't needed -->
    <string name="oem_radio_info_label">OEM-specific Info/Settings</string>

    <!-- Band Mode Selection -->
    <!-- Band mode screen.  Title of activity. -->
    <string name="band_mode_title">Set Radio Band Mode</string>
    <!-- Band mode screen.  Loading message. -->
    <string name="band_mode_loading">Loading Band List\u2026</string>
    <!-- Band mode screen. Button caption to set the bandmode. -->
    <string name="band_mode_set">Set</string>
    <!-- Band mode screen. Status message when unsuccessful. -->
    <string name="band_mode_failed">Unsuccessful</string>
    <!-- Band mode screen. Statusm essage when successful. -->
    <string name="band_mode_succeeded">Successful</string>

    <!-- Instructions after the user changes the mass storage settings -->
    <string name="sdcard_changes_instructions">Changes take effect when USB cable is reconnected.</string>
    <!-- Enable USB mass storage mode checkbox title -->
    <string name="sdcard_settings_screen_mass_storage_text">Enable USB mass storage</string>
    <!-- The label for total bytes on SD card -->
    <string name="sdcard_settings_total_bytes_label">Total bytes:</string>
    <!-- Message when there is no SD card present [CHAR LIMIT=30] -->
    <string name="sdcard_settings_not_present_status" product="nosdcard">USB storage not mounted.</string>
    <!-- Message when there is no SD card present -->
    <string name="sdcard_settings_not_present_status" product="default">No SD card.</string>
    <!-- Th label for the available (free) sapce on the SD card -->
    <string name="sdcard_settings_available_bytes_label">Available bytes:</string>
    <!-- Message when the SD card is being used by the computer as mass storage [CHAR LIMIT=30] -->
    <string name="sdcard_settings_mass_storage_status" product="nosdcard">USB storage is being used as a mass storage device.</string>
    <!-- Message when the SD card is being used by the computer as mass storage -->
    <string name="sdcard_settings_mass_storage_status" product="default">SD card is being used as a mass storage device.</string>
    <!-- Message when it is safe to remove the SD card [CHAR LIMIT=30] -->
    <string name="sdcard_settings_unmounted_status" product="nosdcard">It\u2019s now safe to remove the USB storage.</string>
    <!-- Message when it is safe to remove the SD card -->
    <string name="sdcard_settings_unmounted_status" product="default">It\u2019s now safe to remove the SD card.</string>
    <!-- Error message when the SD card was removed without properly unmounting [CHAR LIMIT=30] -->
    <string name="sdcard_settings_bad_removal_status" product="nosdcard">USB storage was removed while still in use!</string>
    <!-- Error message when the SD card was removed without properly unmounting -->
    <string name="sdcard_settings_bad_removal_status" product="default">SD card was removed while still in use!</string>
    <!-- Label for used bytes on the SD card -->
    <string name="sdcard_settings_used_bytes_label">Used bytes:</string>
    <!-- Message when it is scanning the SD card for new files [CHAR LIMIT=30]  -->
    <string name="sdcard_settings_scanning_status" product="nosdcard">Scanning USB storage for media\u2026</string>
    <!-- Message when it is scanning the SD card for new files -->
    <string name="sdcard_settings_scanning_status" product="default">Scanning SD card for media\u2026</string>
    <!-- Message when the SD card is mounted as read only [CHAR LIMIT=30] -->
    <string name="sdcard_settings_read_only_status" product="nosdcard">USB storage mounted read-only.</string>
    <!-- Message when the SD card is mounted as read only -->
    <string name="sdcard_settings_read_only_status" product="default">SD card mounted read-only.</string>
    <!-- Used in setup wizard Wi-Fi screen.  The button label for going to the next screen without submitting. [CHAR LIMIT=20] -->
    <string name="skip_label">Skip</string>
    <!-- Used in setup wizard Wi-Fi screen. The button label for going to the next screen and submitting. [CHAR LIMIT=20] -->
    <string name="next_label">Next</string>

    <!-- LocalePicker -->
    <!-- Title for the locale picker activity -->
    <string name="language_picker_title">Languages</string>

    <!-- Title for the language selection screen [CHAR LIMIT=25] -->
    <string name="pref_title_lang_selection">Language preferences</string>

    <!-- Menu item in the locale menu. Will remove the selected locales. [CHAR LIMIT=30] -->
    <string name="locale_remove_menu">Remove</string>

    <!-- "Button" that opens a language picker. The selected language gets added to the language list. [CHAR LIMIT=30] -->
    <string name="add_a_language">Add a language</string>

    <!-- The title of the confirmation dialog shown when the user selects one / several languages and tries to remove them [CHAR LIMIT=60] -->
    <plurals name="dlg_remove_locales_title">
        <item quantity="one">Remove selected language?</item>
        <item quantity="other">Remove selected languages?</item>
    </plurals>

    <!-- The text of the confirmation dialog shown when the user selects several languages and tries to remove them [CHAR LIMIT=NONE] -->
    <string name="dlg_remove_locales_message">Text will be displayed in another language.</string>

    <!-- The title of the error dialog shown when the user selects all the languages and tries to remove them [CHAR LIMIT=60] -->
    <string name="dlg_remove_locales_error_title">Can’t remove all languages</string>
    <!-- The text of the error dialog shown when the user selects all the languages and tries to remove them [CHAR LIMIT=NONE] -->
    <string name="dlg_remove_locales_error_message">Keep at least one preferred language</string>

    <!-- This text shows in the language picker when the system is not translated into that languages [CHAR LIMIT=80] -->
    <string name="locale_not_translated">May not be available in some apps</string>

    <!-- Label for an accessibility action that moves a language up in the ordered language list [CHAR LIMIT=20] -->
    <string name="action_drag_label_move_up">Move up</string>
    <!-- Label for an accessibility action that moves a language down in the ordered language list [CHAR LIMIT=20] -->
    <string name="action_drag_label_move_down">Move down</string>
    <!-- Label for an accessibility action that moves a language to the top of the ordered language list [CHAR LIMIT=20] -->
    <string name="action_drag_label_move_top">Move to top</string>
    <!-- Label for an accessibility action that moves a language to the bottom of the ordered language list [CHAR LIMIT=20] -->
    <string name="action_drag_label_move_bottom">Move to bottom</string>
    <!-- Label for an accessibility action that removes the currently selected language from the the ordered language list [CHAR LIMIT=20] -->
    <string name="action_drag_label_remove">Remove language</string>

    <!-- The title of the dialog to pick an activity.  This is shown when there are multiple activities that can do a particular action.  For example, suppose you click on the "Share" menu item in the Browser.  Since you can share the webpage URL via many communication methods, this dialog would come up with choices like "Email", "IM", etc.  This is a generic message, and the previous example is a single possible scenario (so please don't assume it's for the browser or anything :) ). -->
    <string name="activity_picker_label">Choose activity</string>
    <!-- Do not translate. -->
    <string name="debug_intent_sender_label">Debug intent sender</string>
    <!-- The title of the activity to see random device info. -->
    <string name="device_info_label">Device info</string>
    <!-- The title of the activity to adjust display settings -->
    <string name="display_label">Screen</string>
    <!-- The title of the activity to see phone info -->
    <string name="phone_info_label" product="tablet">Tablet info</string>
    <!-- The title of the activity to see phone info -->
    <string name="phone_info_label" product="default">Phone info</string>
    <!-- The title of the activity to adjust SD card settings [CHAR LIMIT=25] -->
    <string name="sd_card_settings_label" product="nosdcard">USB storage</string>
    <!-- The title of the activity to adjust SD card settings-->
    <string name="sd_card_settings_label" product="default">SD card</string>
    <!-- The title of the activity to adjust proxy settings -->
    <string name="proxy_settings_label">Proxy settings</string>

    <!-- ======================================================================================= -->
    <!-- NEW STUFF -->
    <!-- ======================================================================================= -->

    <!-- Button label for generic cancel action [CHAR LIMIT=20] -->
    <string name="cancel">Cancel</string>
    <!-- Button label for generic OK action [CHAR LIMIT=20] -->
    <string name="okay">OK</string>
    <!-- Button label for generic forget action [CHAR LIMIT=20] -->
    <string name="forget">Forget</string>
    <!-- Button label for generic save action [CHAR LIMIT=20] -->
    <string name="save">Save</string>
    <!-- Button label for generic done action [CHAR LIMIT=20] -->
    <string name="done">Done</string>

    <!-- Title of the Settings activity shown within the application itself. -->
    <string name="settings_label">Settings</string>
    <!-- Title of the Settings activity shown in the Launcher. [CHAR LIMIT=20] -->
    <string name="settings_label_launcher">Settings</string>
    <!-- Label for option to select a settings panel as a shortcut -->
    <string name="settings_shortcut">Settings shortcut</string>
    <!-- Shown in create shortcut activity when there is no shortcut that can be created. [CHAR_LIMIT=None] -->
    <string name="activity_list_empty">No matching activities found.</string>
    <!-- Wireless controls settings screen, setting check box label -->
    <string name="airplane_mode">Airplane mode</string>
    <!-- Main Settings screen settings title for things like airplane mode, tethering, NFC, VPN.  This will take you to another screen with those settings.  [CHAR LIMIT=30] -->
    <string name="radio_controls_title">More</string>
    <!-- Wireless Settings screen title for things like Wi-Fi, bluetooth, airplane mode. -->
    <string name="wireless_networks_settings_title">Wireless &amp; networks</string>
    <!-- Main Settings screen settings summary text for the "Wireless controls" setting -->
    <string name="radio_controls_summary">Manage Wi\u2011Fi, Bluetooth, airplane mode, mobile networks, &amp; VPNs</string>

    <!-- check box cellular data title [CHAR LIMIT=30] -->
    <string name="cellular_data_title">Mobile data</string>
    <!-- check box Calls title [CHAR LIMIT=30] -->
    <string name="calls_title">Calls</string>
    <!-- check box SMS Messges title [CHAR LIMIT=30] -->
    <string name="sms_messages_title">SMS messages</string>
    <!-- check box cellular data summary [CHAR LIMIT=85] -->
    <string name="cellular_data_summary">Allow data usage over mobile network</string>
    <!-- check box to allow data usage when roaming [CHAR LIMIT=41] -->
    <string name="allow_data_usage_title">Allow data usage when roaming</string>
    <!-- mobile network settings screen, setting check box title -->
    <string name="roaming">Data roaming</string>
    <!-- mobile network settings screen, setting option summary text when check box is selected -->
    <string name="roaming_enable">Connect to data services when roaming</string>
    <!-- mobile network settings screen, setting option summary text when check box is clear -->
    <string name="roaming_disable">Connect to data services when roaming</string>
    <!-- mobile network settings screen, dialog message when you are roaming and clear the "Data roaming" check box -->
    <string name="roaming_reenable_message">You have lost data connectivity because you left your home network with data roaming turned off.</string>
    <!-- mobile network settings screen, button on dialog box that appears when you are roaming and clear the "Data roaming" check box -->
    <string name="roaming_turn_it_on_button">Turn it on</string>
    <!-- mobile network settings screen, message in dialog box that appears when you select the "Data roaming" check box -->
    <string name="roaming_warning">You may incur significant charges.</string>
    <!-- mobile network settings screen, message in dialog box that appears when you select the "Data roaming" check box. This is for multiuser tablets [CHAR LIMIT=none] -->
    <string name="roaming_warning_multiuser" product="tablet">When you allow data roaming, you may incur significant roaming charges!\n\nThis setting affects all users on this tablet.</string>
    <!-- mobile network settings screen, message in dialog box that appears when you select the "Data roaming" check box. This is for multiuser phones [CHAR LIMIT=none] -->
    <string name="roaming_warning_multiuser" product="default">When you allow data roaming, you may incur significant roaming charges!\n\nThis setting affects all users on this phone.</string>
    <!-- mobile network settings screen, title of dialog box that appears when you select the "Data roaming" check box -->
    <string name="roaming_reenable_title">Allow data roaming?</string>
    <!-- mobile network settings screen, setting option name -->
    <string name="networks">Operator selection</string>
    <!-- mobile network settings screen, setting option summary text -->
    <string name="sum_carrier_select">Choose a network operator</string>

    <!-- Date and time settings --><skip />
    <!-- Main Settings screen setting option name to go into the date and time settings-->
    <string name="date_and_time_settings_title">Date &amp; time</string>
    <!-- Title for Date & Time settings screen in SetupWizard [CHAR LIMIT=40] -->
    <string name="date_and_time_settings_title_setup_wizard">Set date and time</string>
    <!-- Main Settings screen setting option summary text for the item to go into the date and time settings. -->
    <string name="date_and_time_settings_summary">Set date, time, time zone, &amp; formats</string>
    <!-- Date & time setting screen setting check box title if the date and time should be determined automatically [CHAR LIMIT=30] -->
    <string name="date_time_auto">Automatic date &amp; time</string>
    <!-- Date & time setting screen setting option summary text when Automatic check box is selected
        (that is, when date and time should be determined automatically) [CHAR LIMIT=100] -->
    <string name="date_time_auto_summaryOn">Use network-provided time</string>
    <!-- Date & time setting screen setting option summary text when Automatic check box is clear
        [CHAR LIMIT=100] -->
    <string name="date_time_auto_summaryOff">Use network-provided time</string>
    <!-- Date & time setting screen setting check box title if the time zone should be determined automatically [CHAR LIMIT=30] -->
    <string name="zone_auto">Automatic time zone</string>
    <!-- Date & time setting screen setting option summary text when Automatic time zone check box is selected (that is, when date and time should be determined automatically)
        [CHAR LIMIT=100]  -->
    <string name="zone_auto_summaryOn">Use network-provided time zone</string>
    <!-- Date & time setting screen setting option summary text when Automatic time zone check box is clear
        [CHAR LIMIT=100] -->
    <string name="zone_auto_summaryOff">Use network-provided time zone</string>
    <!-- Date & time setting screen setting check box title [CHAR LIMIT=30] -->
    <string name="date_time_24hour_title">24\u2011hour format</string>
    <!-- Date & time setting screen setting check box title -->
    <string name="date_time_24hour">Use 24-hour format</string>
    <!-- Date & time setting screen setting option title [CHAR LIMIT=30] -->
    <string name="date_time_set_time_title">Time</string>
    <!-- Date & time setting screen setting option title -->
    <string name="date_time_set_time">Set time</string>
    <!-- Date & time setting screen setting option title [CHAR LIMIT=30] -->
    <string name="date_time_set_timezone_title">Time zone</string>
    <!-- Date & time setting screen setting option title -->
    <string name="date_time_set_timezone">Select time zone</string>
    <!-- Date & time setting screen setting option title [CHAR LIMIT=30] -->
    <string name="date_time_set_date_title">Date</string>
    <!-- Date & time setting screen setting option title -->
    <string name="date_time_set_date">Set date</string>
    <!-- Menu item on Select time zone screen -->
    <string name="zone_list_menu_sort_alphabetically">Sort alphabetically</string>
    <!-- Menu item on Select time zone screen -->
    <string name="zone_list_menu_sort_by_timezone">Sort by time zone</string>
    <!-- Title string shown above DatePicker, letting a user select system date
         [CHAR LIMIT=20] -->
    <string name="date_picker_title">Date</string>
    <!-- Title string shown above TimePicker, letting a user select system time
         [CHAR LIMIT=20] -->
    <string name="time_picker_title">Time</string>

    <!-- Security Settings --><skip />

    <!-- Security settings screen, setting option name to change screen timeout -->
    <string name="lock_after_timeout">Automatically lock</string>
    <!-- Security settings screen, setting option summary to change screen timeout -->
    <string name="lock_after_timeout_summary"><xliff:g id="timeout_string">%1$s</xliff:g> after sleep</string>
    <!-- Security settings screen, setting option summary to change screen timeout, with additional explanation-->
    <string name="lock_immediately_summary_with_exception">Immediately after sleep, except when kept unlocked by <xliff:g id="trust_agent_name">%1$s</xliff:g></string>
    <!-- Security settings screen, setting option summary to change screen timeout, with additional explanation-->
    <string name="lock_after_timeout_summary_with_exception"><xliff:g id="timeout_string">%1$s</xliff:g> after sleep, except when kept unlocked by <xliff:g id="trust_agent_name">%2$s</xliff:g></string>
    <!-- Text shown next to checkbox for showing owner info on LockScreen [CHAR LIMIT=50]-->
    <string name="show_owner_info_on_lockscreen_label">Show owner info on lock screen</string>
    <!-- Text shown for title of owner info setting [CHAR LIMIT=20]-->
    <string name="owner_info_settings_title">Lock screen message</string>
    <!-- Text shown for title of settings checkbox to enable widgets [CHAR LIMIT=20]-->
    <string name="security_enable_widgets_title">Enable widgets</string>
    <!-- Summary for settings checkbox to disable widgets when the setting has been disabled by an installed device admin [CHAR LIMIT=50] -->
    <string name="security_enable_widgets_disabled_summary">Disabled by admin</string>
    <!-- Text shown for summary of owner info setting (if none set) [CHAR LIMIT=40]-->
    <string name="owner_info_settings_summary">None</string>
    <!-- Description of how many characters are used in owner info [CHAR LIMIT=40]-->
    <string name="owner_info_settings_status"><xliff:g id="count" example="90">%1$d</xliff:g> / <xliff:g id="count" example="100">%2$d</xliff:g></string>
    <!-- Hint text shown in owner info edit text [CHAR LIMIT=50] -->
    <string name="owner_info_settings_edit_text_hint">E.g., Joe\u2019s Android.</string>
    <!-- Text shown for title of user info setting [CHAR LIMIT=20]-->
    <string name="user_info_settings_title">User info</string>
    <!-- Text shown next to checkbox for showing profile info on LockScreen [CHAR LIMIT=50]-->
    <string name="show_profile_info_on_lockscreen_label">Show profile info on lock screen</string>
    <!-- Text shown for title of profile info setting [CHAR LIMIT=20]-->
    <string name="profile_info_settings_title">Profile info</string>
    <!-- Main Settings screen setting option title for the item to take you to the Accounts screen [CHAR LIMIT=22] -->
    <string name="Accounts_settings_title">Accounts</string>
    <!-- Main Settings screen setting option title for the item to take you to the location screen -->
    <string name="location_settings_title">Location</string>
    <!-- Main Settings screen setting option title for the item to take you to the accounts screen [CHAR LIMIT=22] -->
    <string name="account_settings_title">Accounts</string>
    <!-- Main Settings screen setting option title for the item to take you to the security screen -->
    <string name="security_settings_title">Security &amp; location</string>
    <!-- Security Settings screen setting option title for the item to take you to the encryption and credential screen -->
    <string name="encryption_and_credential_settings_title">Encryption &amp; credentials</string>
    <!-- Security Settings screen Encryption and crendential summary -->
    <string name="encryption_and_credential_settings_summary" product="default">Phone encrypted</string>
    <!-- Security Settings screen Encryption and crendential summary -->
    <string name="encryption_and_credential_settings_summary" product="tablet">Device encrypted</string>
    <!-- Security Settings screen setting option title for the item to take you to the lock screen preference screen [CHAR LIMIT=60] -->
    <string name="lockscreen_settings_title">Lock screen preferences</string>

    <!-- Main Settings screen setting option summary text for the item tot ake you to the security and location screen -->
    <string name="security_settings_summary">Set My Location, screen unlock, SIM card lock, credential storage lock</string>
    <!-- Main Settings screen setting option summary text for the item to take you to the CDMA security and location screen -->
    <string name="cdma_security_settings_summary">Set My Location, screen unlock, credential storage lock</string>
    <!-- In the security screen, the header title for settings related to  Passwords-->
    <string name="security_passwords_title">Privacy</string>
    <!-- Summary for settings preference disabled by administrator [CHAR LIMIT=50] -->
    <string name="disabled_by_administrator_summary">Disabled by admin</string>
    <!-- In the security screen, the header title for security statuses -->
    <string name="security_status_title">Security status</string>
    <!-- Summary for Security settings, explaining a few important settings under it [CHAR LIMIT=NONE]-->
    <string name="security_dashboard_summary">Screen lock, fingerprint</string>
    <!-- Summary for Security settings when fingerprint is not supported [CHAR LIMIT=NONE]-->
    <string name="security_dashboard_summary_no_fingerprint">Screen lock</string>
    <!-- Fingerprint enrollment and settings --><skip />
    <!-- Title shown for menu item that launches fingerprint settings or enrollment [CHAR LIMIT=22] -->
    <string name="security_settings_fingerprint_preference_title">Fingerprint</string>
    <!-- Fingerprint managment category title - configuration options for managing enrolled fingerprints [CHAR LIMIT=22] -->
    <string name="fingerprint_manage_category_title">Manage fingerprints</string>
    <!-- Fingerprint category title - configuration options for managing fingerprint enrollment [CHAR LIMIT=22] -->
    <string name="fingerprint_usage_category_title">Use fingerprint for</string>
    <!-- Preference to add another fingerprint -->
    <string name="fingerprint_add_title">Add fingerprint</string>
    <!-- switch for allowing fingerprint to be used for keyguard -->
    <string name="fingerprint_enable_keyguard_toggle_title">screen lock</string>
    <!-- Message showing the current number of fingerprints set up. Shown for a menu item that launches fingerprint settings or enrollment. -->
    <plurals name="security_settings_fingerprint_preference_summary">
        <item quantity="one"><xliff:g id="count">%1$d</xliff:g> fingerprint set up</item>
        <item quantity="other"><xliff:g id="count">%1$d</xliff:g> fingerprints set up</item>
    </plurals>
    <!-- message shown in summary field when no fingerprints are registered -->
    <string name="security_settings_fingerprint_preference_summary_none"></string>
    <!-- Introduction title shown in fingerprint enrollment to introduce the fingerprint feature[CHAR LIMIT=29] -->
    <string name="security_settings_fingerprint_enroll_introduction_title">Unlock with fingerprint</string>
    <!-- Introduction title shown in fingerprint enrollment to introduce the fingerprint feature, when fingerprint unlock is disabed by device admin [CHAR LIMIT=40] -->
    <string name="security_settings_fingerprint_enroll_introduction_title_unlock_disabled">Use your fingerprint</string>
    <!-- Introduction detail message shown in fingerprint enrollment dialog [CHAR LIMIT=NONE]-->
    <string name="security_settings_fingerprint_enroll_introduction_message">Just touch the fingerprint sensor to unlock your phone, authorize purchases, or sign in to apps. Be careful whose fingerprints you add. Even one added print can do any of these things.\n\nNote: Your fingerprint may be less secure than a strong pattern or PIN.</string>
    <!-- Introduction detail message shown in fingerprint enrollment dialog, when fingerprint unlock is disabled by device admin [CHAR LIMIT=NONE]-->
    <string name="security_settings_fingerprint_enroll_introduction_message_unlock_disabled">Use your fingerprint to unlock your phone or approve purchases.\n\nNote: You can\u2019t use your fingerprint to unlock this device. For more information, contact your organization\u2019s admin.</string>
    <!-- Introduction detail message shown in fingerprint enrollment screen in setup wizard. [CHAR LIMIT=NONE]-->
    <string name="security_settings_fingerprint_enroll_introduction_message_setup">Use your fingerprint to unlock your phone or approve purchases.\n\nNote: Your fingerprint may be less secure than a strong pattern or PIN.</string>
    <!-- Button text to cancel enrollment from the introduction [CHAR LIMIT=22] -->
    <string name="security_settings_fingerprint_enroll_introduction_cancel">Cancel</string>
    <!-- Button text to continue to the next screen from the introduction [CHAR LIMIT=22] -->
    <string name="security_settings_fingerprint_enroll_introduction_continue">Continue</string>
    <!-- Button text to cancel enrollment from the introduction (this string variant is used while in setup wizard) [CHAR LIMIT=22] -->
    <string name="security_settings_fingerprint_enroll_introduction_cancel_setup">Skip</string>
    <!-- Button text to continue to the next screen from the introduction (this string variant is used while in setup wizard) [CHAR LIMIT=22] -->
    <string name="security_settings_fingerprint_enroll_introduction_continue_setup">Next</string>
    <!-- Title of dialog shown when the user tries to skip setting up fingerprint after adding lock screen during initial setup. [CHAR LIMIT=30] -->
    <string name="setup_fingerprint_enroll_skip_title">Skip fingerprint?</string>
    <!-- Body text of dialog shown when the user tries to skip setting up fingerprint after adding lock screen during initial setup [CHAR LIMIT=NONE] -->
    <string name="setup_fingerprint_enroll_skip_after_adding_lock_text">Fingerprint setup only takes a minute or two. If you skip this, you can add your fingerprint later in settings.</string>
    <!-- Title of dialog shown when the user tries to skip setting up a screen lock, warning them of potential consequences of not doing so [CHAR LIMIT=30]-->
    <string name="lock_screen_intro_skip_title">Skip screen lock?</string>
    <!-- Dialog text shown when the user tries to skip setting up a screen lock, warning them of potential consequences of not doing so, including loss of factory reset protection. (tablet) [CHAR LIMIT=NONE] -->
    <string name="lock_screen_intro_skip_dialog_text_frp" product="tablet">Device protection features won\u2019t be turned on. You won\u2019t be able to prevent others from using this tablet if it\u2019s lost, stolen or reset.</string>
    <!-- Dialog text shown when the user tries to skip setting up a screen lock, warning them of potential consequences of not doing so, including loss of factory reset protection. (device) [CHAR LIMIT=NONE] -->
    <string name="lock_screen_intro_skip_dialog_text_frp" product="device">Device protection features won\u2019t be turned on. You won\u2019t be able to prevent others from using this device if it\u2019s lost, stolen or reset.</string>
    <!-- Dialog text shown when the user tries to skip setting up a screen lock, warning them of potential consequences of not doing so, including loss of factory reset protection. (phone) [CHAR LIMIT=NONE] -->
    <string name="lock_screen_intro_skip_dialog_text_frp" product="default">Device protection features won\u2019t be turned on. You won\u2019t be able to prevent others from using this phone if it\u2019s lost, stolen or reset.</string>
    <!-- Dialog text shown when the user tries to skip setting up a screen lock, warning them of potential consequences of not doing so. (tablet) [CHAR LIMIT=NONE] -->
    <string name="lock_screen_intro_skip_dialog_text" product="tablet">Device protection features won\u2019t be turned on. You won\u2019t be able to prevent others from using this tablet if it\u2019s lost or stolen.</string>
    <!-- Dialog text shown when the user tries to skip setting up a screen lock, warning them of potential consequences of not doing so. (device) [CHAR LIMIT=NONE] -->
    <string name="lock_screen_intro_skip_dialog_text" product="device">Device protection features won\u2019t be turned on. You won\u2019t be able to prevent others from using this device if it\u2019s lost or stolen.</string>
    <!-- Dialog text shown when the user tries to skip setting up a screen lock, warning them of potential consequences of not doing so. (phone) [CHAR LIMIT=NONE] -->
    <string name="lock_screen_intro_skip_dialog_text" product="default">Device protection features won\u2019t be turned on. You won\u2019t be able to prevent others from using this phone if it\u2019s lost or stolen.</string>
    <!-- Button for skipping a step after having been warned of a potential concern [CHAR LIMIT=30] -->
    <string name="skip_anyway_button_label">Skip anyway</string>
    <!-- Button for going to the previous screen or step [CHAR LIMIT=20] -->
    <string name="go_back_button_label">Go back</string>
    <!-- Introduction title shown in fingerprint enrollment dialog to locate the sensor [CHAR LIMIT=29] -->
    <string name="security_settings_fingerprint_enroll_find_sensor_title">Touch the sensor</string>
    <!-- Message shown in fingerprint enrollment dialog to locate the sensor -->
    <string name="security_settings_fingerprint_enroll_find_sensor_message">It\u2019s on the back of your phone. Use your index finger.</string>
    <!-- Content description of graphic that shows where the fingerprint of the device is [CHAR LIMIT=NONE] -->
    <string name="security_settings_fingerprint_enroll_find_sensor_content_description">Illustration with device and fingerprint sensor location</string>
    <!-- Label text shown in fingerprint dialog for renaming a fingerprint template [CHAR LIMIT=22] -->
    <string name="security_settings_fingerprint_enroll_dialog_name_label">Name</string>
    <!-- Button text shown in fingerprint dialog that allows the user to rename a fingerprint template [CHAR LIMIT=22] -->
    <string name="security_settings_fingerprint_enroll_dialog_ok">OK</string>
    <!-- Button text shown in fingerprint dialog that allows the user to delete the fingerprint template [CHAR LIMIT=22] -->
    <string name="security_settings_fingerprint_enroll_dialog_delete">Delete</string>
    <!-- Title shown in fingerprint enrollment dialog to begin enrollment [CHAR LIMIT=29]-->
    <string name="security_settings_fingerprint_enroll_start_title">Touch the sensor</string>
    <!-- Message shown in fingerprint enrollment dialog to begin enrollment [CHAR LIMIT=NONE] -->
    <string name="security_settings_fingerprint_enroll_start_message">Put your finger on the sensor and lift after you feel a vibration</string>
    <!-- Title shown in fingerprint enrollment dialog to repeat touching the fingerprint sensor [CHAR LIMIT=40] -->
    <string name="security_settings_fingerprint_enroll_repeat_title">Lift, then touch again</string>
    <!-- Message shown in fingerprint enrollment dialog to repeat touching the fingerprint sensor [CHAR LIMIT=NONE] -->
    <string name="security_settings_fingerprint_enroll_repeat_message">Keep lifting your finger to add the different parts of your fingerprint</string>
    <!-- Title shown in fingerprint enrollment dialog once enrollment is completed [CHAR LIMIT=29] -->
    <string name="security_settings_fingerprint_enroll_finish_title">Fingerprint added</string>
    <!-- Message shown in fingerprint enrollment dialog once enrollment is completed -->
    <string name="security_settings_fingerprint_enroll_finish_message">When you see this icon, use your fingerprint for identification or to approve purchases.</string>
    <!-- Button text to skip enrollment of fingerprint [CHAR LIMIT=40] -->
    <string name="security_settings_fingerprint_enroll_enrolling_skip">Do it later</string>
    <!-- Title of the dialog shown when the user tries to skip fingerprint setup, asking them to confirm the action [CHAR LIMIT=40] -->
    <string name="setup_fingerprint_enroll_enrolling_skip_title">Skip fingerprint setup?</string>
    <!-- Content of the dialog shown when the user tries to skip fingerprint setup, asking them to confirm the action [CHAR LIMIT=NONE] -->
    <string name="setup_fingerprint_enroll_enrolling_skip_message">You\u2019ve chosen to use your fingerprint as one way to unlock your phone. If you skip now, you\u2019ll need to set this up later. Setup takes only a minute or so.</string>

    <!-- Button text to setup screen lock in onboard dialog [CHAR LIMIT=34] -->
    <string name="security_settings_fingerprint_enroll_setup_screen_lock">Set up screen lock</string>
    <!-- Button text to exit fingerprint wizard after everything is done [CHAR LIMIT=15] -->
    <string name="security_settings_fingerprint_enroll_done">Done</string>
    <!-- Dialog title for dialog which shows when user touches the icon on the screen, instead of the sensor at the back [CHAR LIMIT=45] -->
    <string name="security_settings_fingerprint_enroll_touch_dialog_title">Whoops, that\u2019s not the sensor</string>
    <!-- Dialog message for dialog which shows when user touches the icon on the screen, instead of the sensor at the back [CHAR LIMIT=NONE] -->
    <string name="security_settings_fingerprint_enroll_touch_dialog_message">Touch the sensor on the back of your phone. Use your index finger.</string>
    <!-- Dialog message for dialog which shows when finger cannot be enrolled. [CHAR LIMIT=45] -->
    <string name="security_settings_fingerprint_enroll_error_dialog_title">Enrollment was not completed</string>
    <!-- Dialog message for dialog which shows when finger cannot be enrolled due to being idle too long. -->
    <string name="security_settings_fingerprint_enroll_error_timeout_dialog_message">Fingerprint enrollment time limit reached. Try again.</string>
    <!-- Dialog message for dialog which shows when finger cannot be enrolled due to an internal error or fingerprint can't be read. -->
    <string name="security_settings_fingerprint_enroll_error_generic_dialog_message">Fingerprint enrollment didn\'t work. Try again or use a different finger.</string>
    <!-- Button text shown at the end of enrollment that allows the user to add another fingerprint -->
    <string name="fingerprint_enroll_button_add">Add another</string>
    <!-- Button text shown at the end of enrollment that allows the user to move to the next step -->
    <string name="fingerprint_enroll_button_next">Next</string>
    <!-- Text shown in fingerprint settings explaining what the fingerprint can be used for. [CHAR LIMIT=NONE] -->
    <string name="security_settings_fingerprint_enroll_disclaimer">In addition to unlocking your phone, you can also use your fingerprint to authorize purchases and app access. <annotation id="url">Learn more</annotation></string>
    <!-- Text shown in fingerprint settings explaining what the fingerprint can be used for in the case unlocking is disabled [CHAR LIMIT=NONE] -->
    <string name="security_settings_fingerprint_enroll_disclaimer_lockscreen_disabled">
        The screen lock option is disabled. To learn more, contact your organization\'s admin.
        <annotation id="admin_details">More details</annotation>\n\nYou can still use your
        fingerprint to authorize purchases and app access.
        <annotation id="url">Learn more</annotation></string>
    <!-- Text shown in fingerprint enroll when we didn't observe progress for a few seconds. [CHAR LIMIT=100] -->
    <string name="security_settings_fingerprint_enroll_lift_touch_again">Lift finger, then touch sensor again</string>

    <!-- Text shown when "Add fingerprint" button is disabled -->
    <string name="fingerprint_add_max">You can add up to <xliff:g id="count" example="5">%d</xliff:g> fingerprints</string>
    <!-- Text shown when users has enrolled a maximum number of fingerprints [CHAR LIMIT=NONE] -->
    <string name="fingerprint_intro_error_max">You\u2019ve added the maximum number of fingerprints</string>
    <!-- Text shown when an unknown error caused the device to be unable to add fingerprints [CHAR LIMIT=NONE] -->
    <string name="fingerprint_intro_error_unknown">Can\u2019t add more fingerprints</string>

    <!-- Title shown in a dialog which asks the user to confirm when the last fingerprint gets deleted by him. [CHAR LIMIT=50]-->
    <string name="fingerprint_last_delete_title">Remove all fingerprints?</string>

    <!-- Title shown in a dialog which asks the user to confirm when a single fingerprint gets deleted. [CHAR LIMIT=50]-->
    <string name="fingerprint_delete_title">Remove \'<xliff:g id="fingerprint_id" example="Fingerprint 2">%1$s</xliff:g>\'</string>

    <!-- Message shown in a dialog which asks the user to confirm when a single fingerprint gets deleted. [CHAR LIMIT=NONE]-->
    <string name="fingerprint_delete_message">Do you want to delete this fingerprint?</string>

    <!-- Message shown in a dialog which asks the user to confirm when the last fingerprint gets deleted by him. [CHAR LIMIT=NONE]-->
    <string name="fingerprint_last_delete_message">You won\'t be able to use your fingerprints to
        unlock your phone, authorize purchases, or sign in to apps with them</string>
    <string name="fingerprint_last_delete_message_profile_challenge">You won\'t be able to use your
        fingerprints to unlock your work profile, authorize purchases, or sign in to work
        apps</string>

    <!-- Button to confirm the last removing the last fingerprint. [CHAR LIMIT=20]-->
    <string name="fingerprint_last_delete_confirm">Yes, remove</string>

    <!-- Content description for the fingerprint icon when the user is prompted to enter his credentials. Not shown on the screen. [CHAR LIMIT=NONE] -->
    <string name="confirm_fingerprint_icon_content_description">Use your fingerprint to continue.</string>

    <!-- Title of the preferences category for preference items to control encryption -->
    <string name="crypt_keeper_settings_title">Encryption</string>

    <!-- Title of the preferences item to control encryption -->
    <string name="crypt_keeper_encrypt_title" product="tablet">Encrypt tablet</string>
    <!-- Title of the preferences item to control encryption -->
    <string name="crypt_keeper_encrypt_title" product="default">Encrypt phone</string>

    <!-- Summary of the preferences item to control encryption, when encryption is active -->
    <string name="crypt_keeper_encrypted_summary">Encrypted</string>

    <!-- Informational text in the first confirmation screen before starting device encryption -->
    <string name="crypt_keeper_desc" product="tablet">
    You can encrypt your accounts, settings, downloaded apps and their data,
    media, and other files. After you encrypt your tablet, assuming you\u2019ve set up a screen lock
    (that is, a pattern or numeric PIN or password), you\u2019ll need to unlock the screen to decrypt
    the tablet every time you power it on. The only other way to decrypt is to perform a factory
    data reset, erasing all your data.\n\nEncryption takes an hour or more. You must start with
    a charged battery and keep your tablet plugged in throughout the process. If you interrupt it,
    you\u2019ll lose some or all of your data</string>
    <!-- Informational text in the first confirmation screen before starting device encryption -->
    <string name="crypt_keeper_desc" product="default">
    You can encrypt your accounts, settings, downloaded apps and their data,
    media, and other files. After you encrypt your phone, assuming you\u2019ve set up a screen lock
    (that is, a pattern or numeric PIN or password), you\u2019ll need to unlock the screen to decrypt
    the phone every time you power it on. The only other way to decrypt is to perform a factory
    data reset, erasing all your data.\n\nEncryption takes an hour or more. You must start with
    a charged battery and keep your phone plugged in throughout the process. If you interrupt it,
    you\u2019ll lose some or all of your data.</string>

    <!-- Button text to start encryption process -->
    <string name="crypt_keeper_button_text" product="tablet">Encrypt tablet</string>
    <!-- Button text to start encryption process -->
    <string name="crypt_keeper_button_text" product="default">Encrypt phone</string>

    <!-- Warning string that will be displayed when encryption cannot be started -->
    <string name="crypt_keeper_low_charge_text">Charge your battery and try again.</string>
    <!-- Warning string that will be displayed when encryption cannot be started -->
    <string name="crypt_keeper_unplugged_text">Plug in your charger and try again.</string>

    <!-- Dialog title, shown when encryption cannot proceed because a PIN/Password is needed -->
    <string name="crypt_keeper_dialog_need_password_title">No lock screen PIN or password</string>
    <!-- Dialog message, shown when encryption cannot proceed because a PIN/Password is needed -->
    <string name="crypt_keeper_dialog_need_password_message">You need to set a lock screen PIN or
    password before you can start encryption.</string>

    <!-- Title of the final confirmation screen before starting device encryption -->
    <string name="crypt_keeper_confirm_title">Encrypt?</string>
    <!-- Warning text in the final confirmation screen before starting device encryption -->
    <string name="crypt_keeper_final_desc" product="tablet">
    The encryption operation is irreversible and if you interrupt it, you\u2019ll lose data.
    Encryption takes an hour or more, during which the tablet will restart several times.
    </string>
    <!-- Warning text in the final confirmation screen before starting device encryption -->
    <string name="crypt_keeper_final_desc" product="default">
    The encryption operation is irreversible and if you interrupt it, you\u2019ll lose data.
    Encryption takes an hour or more, during which the phone will restart several times.
    </string>

    <!-- Title of the progress screen while encrypting the device -->
    <string name="crypt_keeper_setup_title">Encrypting</string>

    <!-- Informational text on the progress screen while encrypting the device -->
    <string name="crypt_keeper_setup_description" product="tablet">Wait while your tablet
    is being encrypted. <xliff:g id="percent" example="50">^1</xliff:g>% complete.</string>
    <!-- Informational text on the progress screen while encrypting the device -->
    <string name="crypt_keeper_setup_description" product="default">Wait while your phone
    is being encrypted. <xliff:g id="percent" example="50">^1</xliff:g>% complete.</string>
    <string name="crypt_keeper_setup_time_remaining" product="tablet">Wait while your tablet
    is being encrypted. Time remaining: <xliff:g id="duration" example="1:23">^1</xliff:g></string>
    <string name="crypt_keeper_setup_time_remaining" product="default">Wait while your phone
    is being encrypted. Time remaining: <xliff:g id="duration" example="1:23">^1</xliff:g></string>

    <string name="crypt_keeper_force_power_cycle" product="tablet">To unlock your tablet, turn it off and then on.</string>
    <string name="crypt_keeper_force_power_cycle" product="default">To unlock your phone, turn it off and then on.</string>


    <!-- Warn user their device will be wiped if they make x more failed attempts -->
    <string name="crypt_keeper_warn_wipe">Warning: Your device will be wiped after
    <xliff:g id="count" example="7">^1</xliff:g> more failed attempts to be unlocked!
    </string>

    <!-- Informational text on the password entry screen prompting the user for their password -->
    <string name="crypt_keeper_enter_password">Type your password</string>

    <!-- Title of the encryption screen when encrypting the device failed -->
    <string name="crypt_keeper_failed_title">Encryption unsuccessful</string>

    <!-- Informational text when encryption fails -->
    <string name="crypt_keeper_failed_summary" product="tablet">
      Encryption was interrupted and can\u2019t complete. As a result, the data on
      your tablet is no longer accessible.
      \n\n
      To resume using your tablet, you need to perform a factory reset.
      When you set up your tablet after the reset, you\u2019ll have an opportunity
      to restore any data that was backed up to your Google Account.
    </string>

    <!-- Informational text when encryption fails -->
    <string name="crypt_keeper_failed_summary" product="default">
      Encryption was interrupted and can\u2019t complete. As a result, the data on
      your phone is no longer accessible.
      \n\nTo resume using your phone, you need to perform a factory reset.
      When you set up your phone after the reset, you\u2019ll have an opportunity
      to restore any data that was backed up to your Google Account.
    </string>

    <!-- Title of the encryption screen when decrypting the device failed -->
    <string name="crypt_keeper_data_corrupt_title">Decryption unsuccessful</string>

    <!-- Informational text when encryption fails -->
    <string name="crypt_keeper_data_corrupt_summary" product="tablet">
      The password you entered is correct, but unfortunately your data is
      corrupt.
      \n\nTo resume using your tablet, you need to perform a factory reset.
      When you set up your tablet after the reset, you\u2019ll have an opportunity
      to restore any data that was backed up to your Google Account.
    </string>

    <!-- Informational text when encryption fails -->
    <string name="crypt_keeper_data_corrupt_summary" product="default">
      The password you entered is correct, but unfortunately your data is
      corrupt.
      \n\nTo resume using your phone, you need to perform a factory reset.
      When you set up your phone after the reset, you\u2019ll have an opportunity
      to restore any data that was backed up to your Google Account.
    </string>

    <!-- Image button description to switch input method -->
    <string name="crypt_keeper_switch_input_method">Switch input method</string>

    <!-- Unlock Picker Settings --><skip />

    <!-- Security Picker --><skip />

    <!-- Title for suggested actions for screen lock -->
    <string name="suggested_lock_settings_title">Set screen lock</string>

    <!-- Summary for suggested actions for screen lock -->
    <string name="suggested_lock_settings_summary">Protect your device</string>

    <!-- Title for suggested actions for settings up a fingerprint lock -->
    <string name="suggested_fingerprint_lock_settings_title">Use fingerprint</string>

    <!-- Summary for suggested actions for settings up a fingerprint lock -->
    <string name="suggested_fingerprint_lock_settings_summary">Unlock with your fingerprint</string>

    <!--  Title for security picker to choose the unlock method: None/Pattern/PIN/Password [CHAR LIMIT=22] -->
    <string name="lock_settings_picker_title">Choose screen lock</string>

    <!--  Title for security picker to choose the profile unlock method: None/Pattern/PIN/Password [CHAR LIMIT=22] -->
    <string name="lock_settings_picker_title_profile">Choose work lock</string>

    <!--  Title for security picker in setup wizard to choose the unlock method: None/Pattern/PIN/Password (tablet) [CHAR LIMIT=22] -->
    <string name="setup_lock_settings_picker_title" product="tablet">Protect your tablet</string>
    <!--  Title for security picker in setup wizard to choose the unlock method: None/Pattern/PIN/Password (device) [CHAR LIMIT=22] -->
    <string name="setup_lock_settings_picker_title" product="device">Protect your device</string>
    <!--  Title for security picker in setup wizard to choose the unlock method: None/Pattern/PIN/Password (phone) [CHAR LIMIT=22] -->
    <string name="setup_lock_settings_picker_title" product="default">Protect your phone</string>

    <!-- Message shown when setting up screen lock, prompting user to choose the their backup screen lock method [CHAR LIMIT=NONE] -->
    <string name="lock_settings_picker_fingerprint_added_security_message">For added security, set up a backup screen lock.</string>

    <!-- Description text for screen in setup wizard asking user to set up screen lock, explaining to the user how setting up a screen lock protect them from losing data. (tablet) [CHAR LIMIT=NONE] -->
    <string name="setup_lock_settings_picker_message" product="tablet">Prevent others from using this tablet without your permission by activating device protection features. Choose the screen lock you want to use.</string>
    <!-- Description text for screen in setup wizard asking user to set up screen lock, explaining to the user how setting up a screen lock protect them from losing data. (device) [CHAR LIMIT=NONE] -->
    <string name="setup_lock_settings_picker_message" product="device">Prevent others from using this device without your permission by activating device protection features. Choose the screen lock you want to use.</string>
    <!-- Description text for screen in setup wizard asking user to set up screen lock, explaining to the user how setting up a screen lock protect them from losing data. (phone) [CHAR LIMIT=NONE] -->
    <string name="setup_lock_settings_picker_message" product="default">Prevent others from using this phone without your permission by activating device protection features. Choose the screen lock you want to use.</string>

    <!-- Message shown in screen lock picker while setting up the backup/fallback screen lock method for fingerprint. Users can choose to use this method to unlock the screen instead of fingerprint, or when fingerprint is not accepted. [CHAR LIMIT=80] [BACKUP_MESSAGE_ID=2799884038398627882] -->
    <string name="lock_settings_picker_fingerprint_message">Choose your backup screen lock method</string>

    <!-- Label for button in screen lock settings, allowing users to choose other types of screen locks. [CHAR LIMIT=40] -->
    <string name="setup_lock_settings_options_button_label">Screen lock options</string>

    <!-- Title for dialog in screen lock settings, allowing users to choose other types of screen locks. [CHAR LIMIT=40] -->
    <string name="setup_lock_settings_options_dialog_title">Screen lock options</string>

    <!--  Main Security lock settings --><skip />
    <!--  Title for PreferenceScreen to launch picker for security method when there is none [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_launch_picker_title">Screen lock</string>

    <!--  Summary for PreferenceScreen to launch picker for security method when there is none [CHAR LIMIT=NONE] -->
    <string name="unlock_set_unlock_launch_picker_summary_lock_immediately"><xliff:g id="unlock_method" example="PIN">%1$s</xliff:g> / Immediately after sleep</string>

    <!--  Summary for PreferenceScreen to launch picker for security method when there is none [CHAR LIMIT=NONE] -->
    <string name="unlock_set_unlock_launch_picker_summary_lock_after_timeout"><xliff:g id="unlock_method" example="PIN">%1$s</xliff:g> / <xliff:g id="timeout_string">%2$s</xliff:g> after sleep</string>

    <!--  Profile Security lock settings --><skip />
    <!--  Title for PreferenceScreen to launch picker for security method for the managed profile when there is none [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_launch_picker_title_profile">Work profile lock</string>

    <!--  Title for PreferenceScreen to change security method: None/Pattern/PIN/Password [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_launch_picker_change_title">Change lock screen</string>

    <!--  Summary for PreferenceScreen to change security method: None/Pattern/PIN/Password [CHAR LIMIT=45]  -->
    <string name="unlock_set_unlock_launch_picker_change_summary">Change or disable pattern, PIN, or password security</string>

    <!--  Summary for PreferenceScreen to change security method: None/Pattern/PIN/Password [CHAR LIMIT=45]  -->
    <string name="unlock_set_unlock_launch_picker_enable_summary">Choose a method to lock the screen</string>

    <!-- Title for preference that disables unlock security [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_off_title">None</string>
    <!-- Summary for preference that disables unlock security [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_off_summary"></string>

    <!-- Title for preference that disables unlock security [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_none_title">Swipe</string>
    <!-- Summary for preference that disables unlock security [CHAR LIMIT=45]-->
    <string name="unlock_set_unlock_none_summary">No security</string>

    <!-- Title for preference that guides the user through creating an unlock pattern [CHAR LIMIT=22]-->
    <string name="unlock_set_unlock_pattern_title">Pattern</string>
    <!-- Summary for preference that guides the user through creating an unlock pattern [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_pattern_summary">Medium security</string>

    <!-- Title for preference that guides the user through creating an unlock PIN (Personal Identification Number) [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_pin_title">PIN</string>
    <!-- Summary for preference that guides the user through creating an unlock PIN (Personal Identification Number) [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_pin_summary">Medium to high security</string>

    <!-- Title for preference that guides the user through creating an unlock password [CHAR LIMIT=22] -->
    <string name="unlock_set_unlock_password_title">Password</string>
    <!-- Title for preference that guides the user through creating an unlock password [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_password_summary">High security</string>

    <!-- Title for preference that allows the user to setup their lock screen preference later [CHAR LIMIT=22] -->
    <string name="unlock_set_do_later_title">Not now</string>

    <!-- Summary specifying that this is the current screen lock setting [CHAR LIMIT=45] -->
    <string name="current_screen_lock">Current screen lock</string>

    <!-- Title for preference that guides the user through creating a backup unlock pattern for fingerprint [CHAR LIMIT=45]-->
    <string name="fingerprint_unlock_set_unlock_pattern">Fingerprint + Pattern</string>

    <!-- Title for preference that guides the user through creating a backup unlock PIN for fingerprint [CHAR LIMIT=45]-->
    <string name="fingerprint_unlock_set_unlock_pin">Fingerprint + PIN</string>

    <!-- Title for preference that guides the user through creating a backup unlock password for fingerprint [CHAR LIMIT=45]-->
    <string name="fingerprint_unlock_set_unlock_password">Fingerprint + Password</string>

    <!-- Title for preference that guides the user to skip fingerprint setup [CHAR LIMIT=60]-->
    <string name="fingerprint_unlock_skip_fingerprint">Continue without fingerprint</string>

    <!-- Message shown in screen lock picker while setting up the new screen lock with fingerprint option. [CHAR LIMIT=NONE]-->
    <string name="fingerprint_unlock_title">You can unlock your phone using your fingerprint. For security, this option requires a backup screen lock.</string>

    <!-- Summary for preference that has been disabled by because of the DevicePolicyAdmin, or because device encryption is enabled, or because there are credentials in the credential storage [CHAR LIMIT=50] -->
    <string name="unlock_set_unlock_disabled_summary">Disabled by admin, encryption policy, or
        credential storage</string>

    <!-- Summary for "Configure lockscreen" when lock screen is off [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_off">None</string>
    <!-- Summary for "Configure lockscreen" when security is disabled [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_none">Swipe</string>
    <!-- Summary for "Configure lockscreen" when security pattern is enabled [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_pattern">Pattern</string>
    <!-- Summary for "Configure lockscreen" when security PIN is enabled [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_pin">PIN</string>
    <!-- Summary for "Configure lockscreen" when security password is enabled [CHAR LIMIT=45] -->
    <string name="unlock_set_unlock_mode_password">Password</string>

    <!-- Footer text in when choosing screen lock type during setup wizard, telling the user that
         they can add fingerprint after they complete setup wizard. The text "Settings > Security"
         should match settings_label and security_settings_title [CHAR LIMIT=NONE] -->
    <string name="unlock_setup_wizard_fingerprint_details">Once you\u2019ve set up a screen lock, you can also set up your fingerprint in Settings &gt; Security.</string>

    <!-- Title for option to turn of password/pin/pattern unlock. [CHAR LIMIT=22] -->
    <string name="unlock_disable_lock_title">Turn off screen lock</string>

    <!-- Title of the dialog shown when the user removes the device lock [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_title">Remove device protection?</string>
    <!-- Title of the dialog shown when the user removes the profile lock [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_title_profile">Remove profile protection?</string>

    <!-- Content of the dialog shown when the user removes the device lock pattern [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_pattern">"Device protection features will not work without your pattern."</string>
    <!-- Content of the dialog shown when the user removes the device lock pattern and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_pattern_fingerprint">"Device protection features will not work without your pattern.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this device and you won\'t be able to unlock your phone, authorize purchases, or sign in to apps with them."</string>
    <!-- Content of the dialog shown when the user removes the device lock PIN [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_pin">"Device protection features will not work without your PIN."</string>
    <!-- Content of the dialog shown when the user removes the device lock PIN and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_pin_fingerprint">"Device protection features will not work without your PIN.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this device and you won\'t be able to unlock your phone, authorize purchases, or sign in to apps with them."</string>
    <!-- Content of the dialog shown when the user removes the device lock password [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_password">"Device protection features will not work without your password."</string>
    <!-- Content of the dialog shown when the user removes the device lock password and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_password_fingerprint">"Device protection features will not work without your password.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this device and you won\'t be able to unlock your phone, authorize purchases, or sign in to apps with them."</string>
    <!-- Content of the dialog shown when the user removes the device lock of unknown type [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_unknown">"Device protection features will not work without your screen lock."</string>
    <!-- Content of the dialog shown when the user removes the device lock of unknown type and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_unknown_fingerprint">"Device protection features will not work without your screen lock.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this device and you won\'t be able to unlock your phone, authorize purchases, or sign in to apps with them."</string>

    <!-- Content of the dialog shown when the user removes the profile lock pattern [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_pattern_profile">"Profile protection features will not work without your pattern."</string>
    <!-- Content of the dialog shown when the user removes the profile lock pattern and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_pattern_fingerprint_profile">"Profile protection features will not work without your pattern.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this profile and you won\'t be able to unlock your profile, authorize purchases, or sign in to apps with them."</string>
    <!-- Content of the dialog shown when the user removes the profile lock PIN [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_pin_profile">"Profile protection features will not work without your PIN."</string>
    <!-- Content of the dialog shown when the user removes the profile lock PIN and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_pin_fingerprint_profile">"Profile protection features will not work without your PIN.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this profile and you won\'t be able to unlock your profile, authorize purchases, or sign in to apps with them."</string>
    <!-- Content of the dialog shown when the user removes the profile lock password [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_password_profile">"Profile protection features will not work without your password."</string>
    <!-- Content of the dialog shown when the user removes the profile lock password and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_password_fingerprint_profile">"Profile protection features will not work without your password.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this profile and you won\'t be able to unlock your profile, authorize purchases, or sign in to apps with them."</string>
    <!-- Content of the dialog shown when the user removes the profile lock of unknown type [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_unknown_profile">"Profile protection features will not work without your screen lock."</string>
    <!-- Content of the dialog shown when the user removes the profile lock of unknown type and the user has fingerprints enrolled [CHAR LIMIT=NONE] -->
    <string name="unlock_disable_frp_warning_content_unknown_fingerprint_profile">"Profile protection features will not work without your screen lock.<xliff:g id="empty_line">\n\n</xliff:g>Your saved fingerprints will also be removed from this profile and you won\'t be able to unlock your profile, authorize purchases, or sign in to apps with them."</string>

    <!-- Affirmative action of the dialog shown when the user removes the device lock [CHAR LIMIT=25] -->
    <string name="unlock_disable_frp_warning_ok">Yes, remove</string>

    <!-- Title shown on security settings to allow the user to change their lockscreen pattern [CHAR LIMIT=22] -->
    <string name="unlock_change_lock_pattern_title">Change unlock pattern</string>
    <!-- Title shown on security settings to allow the user to change their lockscreen PIN [CHAR LIMIT=22] -->
    <string name="unlock_change_lock_pin_title">Change unlock PIN</string>
    <!-- Title shown on security settings to allow the user to change their lockscreen password [CHAR LIMIT=22]-->
    <string name="unlock_change_lock_password_title">Change unlock password</string>

    <!-- Message shown on the lock screen when the user incorrectly enters their lock and it counts towards the max attempts before their data on the device is wiped. [CHAR LIMIT=NONE] -->
    <string name="lock_failed_attempts_before_wipe">Try again. Attempt <xliff:g id="current_attempts">%1$d</xliff:g> of <xliff:g id="total_attempts">%2$d</xliff:g>.</string>

    <!-- Title of a dialog shown when the user only has one attempt left to provide the lock before the device, one of its users, or a work profile is wiped. [CHAR LIMIT=NONE] -->
    <string name="lock_last_attempt_before_wipe_warning_title">Your data will be deleted</string>
    <!-- Content of the dialog shown when the user only has one attempt left to provide the device lock pattern before the device is wiped. [CHAR LIMIT=NONE] -->
    <string name="lock_last_pattern_attempt_before_wipe_device">If you enter an incorrect pattern on the next attempt, this device\'s data will be deleted</string>
    <!-- Content of the dialog shown when the user only has one attempt left to provide the device lock PIN before the device is wiped. [CHAR LIMIT=NONE] -->
    <string name="lock_last_pin_attempt_before_wipe_device">If you enter an incorrect PIN on the next attempt, this device\'s data will be deleted</string>
    <!-- Content of the dialog shown when the user only has one attempt left to provide the device lock password before the device is wiped. [CHAR LIMIT=NONE] -->
    <string name="lock_last_password_attempt_before_wipe_device">If you enter an incorrect password on the next attempt, this device\'s data will be deleted</string>
    <!-- Content of the dialog shown when the user only has one attempt left to provide the user lock pattern before the user is removed. [CHAR LIMIT=NONE] -->
    <string name="lock_last_pattern_attempt_before_wipe_user">If you enter an incorrect pattern on the next attempt, this user will be deleted</string>
    <!-- Content of the dialog shown when the user only has one attempt left to provide the user lock PIN before the user is removed. [CHAR LIMIT=NONE] -->
    <string name="lock_last_pin_attempt_before_wipe_user">If you enter an incorrect PIN on the next attempt, this user will be deleted</string>
    <!-- Content of the dialog shown when the user only has one attempt left to provide the user lock password before the user is removed. [CHAR LIMIT=NONE] -->
    <string name="lock_last_password_attempt_before_wipe_user">If you enter an incorrect password on the next attempt, this user will be deleted</string>
    <!-- Content of the dialog shown when the user only has one attempt left to provide the work lock pattern before the work profile is removed. [CHAR LIMIT=NONE] -->
    <string name="lock_last_pattern_attempt_before_wipe_profile">If you enter an incorrect pattern on the next attempt, your work profile and its data will be deleted</string>
    <!-- Content of the dialog shown when the user only has one attempt left to provide the work lock PIN before the work profile is removed. [CHAR LIMIT=NONE] -->
    <string name="lock_last_pin_attempt_before_wipe_profile">If you enter an incorrect PIN on the next attempt, your work profile and its data will be deleted</string>
    <!-- Content of the dialog shown when the user only has one attempt left to provide the work lock password before the work profile is removed. [CHAR LIMIT=NONE] -->
    <string name="lock_last_password_attempt_before_wipe_profile">If you enter an incorrect password on the next attempt, your work profile and its data will be deleted</string>

    <!-- Content of the dialog shown when the user has failed to provide the device lock too many times and the device is wiped. [CHAR LIMIT=NONE] -->
    <string name="lock_failed_attempts_now_wiping_device">Too many incorrect attempts. This device\'s data will be deleted.</string>
    <!-- Content of the dialog shown when the user has failed to provide the user lock too many times and the user is removed. [CHAR LIMIT=NONE] -->
    <string name="lock_failed_attempts_now_wiping_user">Too many incorrect attempts. This user will be deleted.</string>
    <!-- Content of the dialog shown when the user has failed to provide the work lock too many times and the work profile is removed. [CHAR LIMIT=NONE] -->
    <string name="lock_failed_attempts_now_wiping_profile">Too many incorrect attempts. This work profile and its data will be deleted.</string>
    <!-- Button label to dismiss the dialog telling the user the work profile has been wiped. [CHAR LIMIT=40] -->
    <string name="lock_failed_attempts_now_wiping_dialog_dismiss">Dismiss</string>

    <!-- Hint shown in dialog screen when password is too short -->
    <string name="lockpassword_password_too_short">Must be at least <xliff:g id="count" example="3">%d</xliff:g> characters</string>
    <!-- Hint shown in dialog screen when PIN is too short -->
    <string name="lockpassword_pin_too_short">PIN must be at least <xliff:g id="count" example="3">%d</xliff:g> digits</string>

    <!-- Hint shown after minimum password criteria is met -->
    <string name="lockpassword_continue_label">Continue</string>

    <!-- Error shown in popup when password is too long -->
    <string name="lockpassword_password_too_long">Must be fewer than
        <xliff:g id="number" example="17">%d</xliff:g> characters</string>
    <!-- Error shown in popup when PIN is too long -->
    <string name="lockpassword_pin_too_long">Must be fewer than
        <xliff:g id="number" example="17">%d</xliff:g> digits</string>

    <!-- Error shown when in PIN mode and user enters a non-digit -->
    <string name="lockpassword_pin_contains_non_digits">Must contain only digits 0-9</string>

    <!-- Error shown when in PIN mode and PIN has been used recently. Please keep this string short! -->
    <string name="lockpassword_pin_recently_used">Device admin doesn\'t allow using a recent PIN</string>

    <!-- Error shown when in PASSWORD mode and user enters an invalid character -->
    <string name="lockpassword_illegal_character">This can\'t include an invalid character</string>

    <!-- Error shown when in PASSWORD mode and password is all digits -->
    <string name="lockpassword_password_requires_alpha">Must contain at least one letter</string>

    <!-- Error shown when in PASSWORD mode and password doesn't contain any digits -->
    <string name="lockpassword_password_requires_digit">Must contain at least one digit</string>

    <!-- Error shown when in PASSWORD mode and password doesn't contain any symbols -->
    <string name="lockpassword_password_requires_symbol">Must contain at least one symbol</string>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of letters -->
    <plurals name="lockpassword_password_requires_letters">
        <item quantity="one">Must contain at least 1 letter</item>
        <item quantity="other">Must contain at least <xliff:g id="count" example="3">%d</xliff:g> letters</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of lowercase letters -->
    <plurals name="lockpassword_password_requires_lowercase">
        <item quantity="one">Must contain at least 1 lowercase letter</item>
        <item quantity="other">Must contain at least <xliff:g id="count" example="3">%d</xliff:g> lowercase letters</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of uppercase letters -->
    <plurals name="lockpassword_password_requires_uppercase">
        <item quantity="one">Must contain at least 1 uppercase letter</item>
        <item quantity="other">Must contain at least <xliff:g id="count" example="3">%d</xliff:g> uppercase letters</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of numerical digits -->
    <plurals name="lockpassword_password_requires_numeric">
        <item quantity="one">Must contain at least 1 numerical digit</item>
        <item quantity="other">Must contain at least <xliff:g id="count" example="3">%d</xliff:g> numerical digits</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of special symbols -->
    <plurals name="lockpassword_password_requires_symbols">
        <item quantity="one">Must contain at least 1 special symbol</item>
        <item quantity="other">Must contain at least <xliff:g id="count" example="3">%d</xliff:g> special symbols</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password doesn't contain the required number of non-letter characters -->
    <plurals name="lockpassword_password_requires_nonletter">
        <item quantity="one">Must contain at least 1 non-letter character</item>
        <item quantity="other">Must contain at least <xliff:g id="count" example="3">%d</xliff:g> non-letter characters</item>
    </plurals>

    <!-- Error shown when in PASSWORD mode and password has been used recently. Please keep this string short! -->
    <string name="lockpassword_password_recently_used">Device admin doesn\'t allow using a recent
        password</string>

    <!-- [CHAR_LIMIT=NONE] Error shown when the user tries to set an ascending or descending sequence of digits -->
    <string name="lockpassword_pin_no_sequential_digits">Ascending, descending, or repeated sequence
        of digits isn\'t allowed</string>

    <!-- Label for ChoosePassword/PIN OK button -->
    <string name="lockpassword_ok_label">OK</string>

    <!-- Label for ChoosePassword/PIN OK button -->
    <string name="lockpassword_cancel_label">Cancel</string>

    <!-- Label for ChoosePassword/PIN Clear button that clears all text entered by the user so far. -->
    <string name="lockpassword_clear_label">Clear</string>

    <!-- Label for LockPatternTutorial Cancel button -->
    <string name="lockpattern_tutorial_cancel_label">Cancel</string>

    <!-- Label for LockPatternTutorial Continue button -->
    <string name="lockpattern_tutorial_continue_label">Next</string>

    <!-- Toast shown when lock pattern or password successfully setup. [CHAR LIMIT=64] -->
    <string name="lock_setup" msgid="5507462851158901718">Setup is complete.</string>

    <!-- Title of preference to manage device admin apps, which are used by IT admins to manage devices -->
    <string name="manage_device_admin">Device admin apps</string>

    <!-- Summary of preference to manage device admin apps, informing the user that currently no device admin apps are installed and active -->
    <string name="number_of_device_admins_none">No active apps</string>

    <!-- Summary of preference to manage device admin apps, informing the user how many device admin apps are installed and active -->
    <plurals name="number_of_device_admins">
        <item quantity="one"><xliff:g id="count">%d</xliff:g> active app</item>
        <item quantity="other"><xliff:g id="count">%d</xliff:g> active apps</item>
    </plurals>

    <!-- Title of preference to manage trust agents -->
    <string name="manage_trust_agents">Trust agents</string>

    <!-- Summary shown when trust agent settings is disabled because the user hasn't set up primary security -->
    <string name="disabled_because_no_backup_security">To use, first set a screen lock</string>

    <!-- Summary of preference to manage device policies when there is no trust agents-->
    <string name="manage_trust_agents_summary">None</string>

    <!-- Summary of preference to manage device policies when there is trust agent-->
    <plurals name="manage_trust_agents_summary_on">
        <item quantity="one">1 active trust agent</item>
        <item quantity="other"><xliff:g id="count" example="3">%d</xliff:g> active trust agents</item>
    </plurals>

    <!-- Bluetooth settings -->
    <!-- Bluetooth settings check box title on Main Settings screen -->
    <string name="bluetooth_quick_toggle_title">Bluetooth</string>
    <!-- Bluetooth settings check box summary for turning on bluetooth -->
    <string name="bluetooth_quick_toggle_summary">Turn on Bluetooth</string>
    <!--Used as title on second screen after selecting Bluetooth settings -->
    <string name="bluetooth_settings">Bluetooth</string>
    <!--Wireless controls screen, settings title for the item to take you to the bluetooth settings screen -->
    <string name="bluetooth_settings_title">Bluetooth</string>
    <!--Wireless controls screen, settings summary for the item tot ake you to the bluetooth settings screen -->
    <string name="bluetooth_settings_summary">Manage connections, set device name &amp; discoverability</string>

    <!-- ======================================================================================= -->
    <!-- Note: The opening brackets of HTML style tags are escaped (e.g. "<b>" is "&lt;b>") in   -->
    <!--   the following resources to enable formatting followed by HTML styling, as described   -->
    <!--   here:  http://developer.android.com/guide/topics/resources/string-resource.html       -->
    <!-- ======================================================================================= -->

    <!-- Title for the dialog to enter PIN. [CHAR LIMIT=40] -->
    <string name="bluetooth_pairing_request">Pair with <xliff:g id="device_name">%1$s</xliff:g>?</string>

    <!-- Message when bluetooth is informing the user of the pairing key. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_pairing_key_msg">Bluetooth pairing code</string>

    <!-- Message when bluetooth dialog for passkey entry is showing. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_enter_passkey_msg">Type the pairing code then press Return or Enter</string>

    <!-- Checkbox label for alphanumeric PIN entry (default is numeric PIN). [CHAR LIMIT=50] -->
    <string name="bluetooth_enable_alphanumeric_pin">PIN contains letters or symbols</string>

    <!-- Bluetooth PIN hint text (below the text entry box). [CHAR LIMIT=30] -->
    <string name="bluetooth_pin_values_hint">Usually 0000 or 1234</string>

    <!-- Bluetooth PIN hint text (below the text entry box). [CHAR LIMIT=30] -->
    <string name="bluetooth_pin_values_hint_16_digits">Must be 16 digits</string>

    <!-- Pairing dialog text to remind user to enter the PIN on the other device. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_enter_pin_other_device">You may also need to type this PIN on the other device.</string>
    <!-- Pairing dialog text to remind user to enter the passkey on the other device. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_enter_passkey_other_device">You may also need to type this passkey on the other device.</string>

    <!-- Message for confirmation of passkey to complete pairing. [CHAR LIMIT=NONE] -->
    <string name="bluetooth_confirm_passkey_msg">To pair with:&lt;br>&lt;b><xliff:g id="device_name">%1$s</xliff:g>&lt;/b>&lt;br>&lt;br>Make sure it is showing this passkey:&lt;br>&lt;b><xliff:g id="passkey">%2$s</xliff:g>&lt;/b></string>

    <!-- Message when bluetooth incoming pairing request for (2.1 devices) dialog is showing -->
    <string name="bluetooth_incoming_pairing_msg">From:&lt;br>&lt;b><xliff:g id="device_name">%1$s</xliff:g>&lt;/b>&lt;br>&lt;br>Pair with this device?</string>

    <!-- Message when bluetooth dialog when passkey or pin needs to be displayed. -->
    <string name="bluetooth_display_passkey_pin_msg">To pair with:<xliff:g id="bold1">&lt;br>&lt;b></xliff:g><xliff:g id="device_name">%1$s</xliff:g><xliff:g id="end_bold1">&lt;/b>&lt;br>&lt;br></xliff:g>Type on it:<xliff:g id="bold2">&lt;br>&lt;b></xliff:g><xliff:g id="passkey">%2$s</xliff:g><xliff:g id="end_bold2">&lt;/b></xliff:g>, then press Return or Enter.</string>

    <!-- Checkbox message in pairing dialogs.  [CHAR LIMIT=NONE] -->
    <string name="bluetooth_pairing_shares_phonebook">Allow access to your contacts and call history</string>

    <!-- Title for BT error dialogs. -->
    <string name="bluetooth_error_title"></string>

    <!-- Message for the error dialog when BT connecting operation fails generically. -->
    <string name="bluetooth_connecting_error_message">Couldn\u2019t connect to <xliff:g id="device_name">%1$s</xliff:g>.</string>

    <!-- Bluetooth settings: The title of the preference (list item) that initiates a scan for devices -->
    <string name="bluetooth_preference_scan_title">Scan for devices</string>
    <!-- Bluetooth settings: The title of the action button that initiates a search for nearby devices [CHAR LIMIT=20] -->
    <string name="bluetooth_search_for_devices">Refresh</string>
    <!-- Bluetooth settings: The title of the action button while a search for nearby devices is in progress [CHAR LIMIT=20] -->
    <string name="bluetooth_searching_for_devices">Searching\u2026</string>
    <!-- Bluetooth settings: The sub heading for device settings. [CHAR LIMIT=30] -->
    <string name="bluetooth_preference_device_settings">Device settings</string>
    <!-- Bluetooth settings: Paired dialog title [CHAR LIMIT=40] -->
    <string name="bluetooth_preference_paired_dialog_title">Paired device</string>
    <!-- Bluetooth settings: Name label [CHAR LIMIT=40] -->
    <string name="bluetooth_preference_paired_dialog_name_label">Name</string>
    <!-- Bluetooth settings: Checkbox label for enable/disable internet connection.  [CHAR LIMIT=40] -->
    <string name="bluetooth_preference_paired_dialog_internet_option">Internet connection</string>
    <!-- Bluetooth settings: Checkbox label for enable/disable keyboard connection.  [CHAR LIMIT=40] -->
    <string name="bluetooth_preference_paired_dialog_keyboard_option">Keyboard</string>
    <!-- Bluetooth settings: Checkbox label for enable/disable contacts connection.  [CHAR LIMIT=40] -->
    <string name="bluetooth_preference_paired_dialog_contacts_option">Contacts and call history</string>
    <!-- Bluetooth settings: pairing dialog title.  [CHAR LIMIT=40] -->
    <string name="bluetooth_pairing_dialog_title">Pair with this device?</string>
    <!-- Bluetooth settings: share phone book title.  [CHAR LIMIT=40] -->
    <string name="bluetooth_pairing_dialog_sharing_phonebook_title">Share phone book?</string>
    <!-- Bluetooth settings: Message informing user that a bluetooth wants to access contant and call history.  [CHAR LIMIT=100] -->
    <string name="bluetooth_pairing_dialog_contants_request"><xliff:g id="device_name">%1$s</xliff:g> wants to access your contacts and call history.</string>
    <!-- Bluetooth settings: paring permission message.  [CHAR LIMIT=100] -->
    <string name="bluetooth_pairing_dialog_paring_request"><xliff:g id="device_name">%1$s</xliff:g> wants to pair with Bluetooth. When connected, it will have access to your contacts and call history.</string>
    <!-- Bluetooth settings: The sub heading for devices which have already been paired with this device. [CHAR LIMIT=40] -->
    <string name="bluetooth_preference_paired_devices">Paired devices</string>
    <!-- Bluetooth settings: The sub heading for available devices during and after scanning. [CHAR LIMIT=40] -->
    <string name="bluetooth_preference_found_devices">Available devices</string>
    <!-- Bluetooth settings: The message displayed if no Bluetooth devices were found. [CHAR LIMIT=40] -->
    <string name="bluetooth_preference_no_found_devices">No devices available</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will connect to all profiles on the device. -->
    <string name="bluetooth_device_context_connect">Connect</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will disconnect from all profiles on the device. -->
    <string name="bluetooth_device_context_disconnect">Disconnect</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will first pair, and then connect to all profiles on the device. -->
    <string name="bluetooth_device_context_pair_connect">Pair &amp; connect</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will remove pairing with the device. -->
    <string name="bluetooth_device_context_unpair">Unpair</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will disconnect and remove pairing with the device. -->
    <string name="bluetooth_device_context_disconnect_unpair">Disconnect &amp; unpair</string>
    <!-- Bluetooth settings.  Context menu item for a device.  Action will take the user to another screen where they can choose exactly which profiles to connect to. -->
    <string name="bluetooth_device_context_connect_advanced">Options\u2026</string>
    <!-- Bluetooth settings.  Menu option to Bluetooth advanced settings [CHAR LIMIT=20]-->
    <string name="bluetooth_menu_advanced">Advanced</string>
    <!-- Bluetooth settings. Title of the advanced bluetooth settings screen [CHAR LIMIT=30]-->
    <string name="bluetooth_advanced_titlebar">Advanced Bluetooth</string>
    <!-- Bluetooth settings. Text displayed when Bluetooth is off and device list is empty [CHAR LIMIT=50]-->
    <string name="bluetooth_empty_list_bluetooth_off">When Bluetooth is turned on, your device can communicate with other nearby Bluetooth devices.</string>
    <!-- Message to describe "BLE scan always available feature" when Bluetooth is off. The
      place-holders "LINK_BEGIN" and "LINK_END" must NOT be translated. They mark a link to bring
      the user to "scanning settings" screen. -->
    <string name="ble_scan_notify_text">To improve location accuracy, system apps and services can
      still detect Bluetooth devices. You can change this in
      <xliff:g id="link_begin">LINK_BEGIN</xliff:g>scanning
      settings<xliff:g id="link_end">LINK_END</xliff:g>.</string>
    <!-- Bluetooth connecting error message [CHAR LIMIT=NONE] -->
    <string name="bluetooth_connect_failed">Couldn\'t connect. Try again.</string>

    <!-- Title of device details screen [CHAR LIMIT=40]-->
    <string name="device_details_title">Device details</string>
    <!-- Title of the item to show device MAC address -->
    <string name="bluetooth_device_mac_address">Device\'s Bluetooth address: <xliff:g id="address">%1$s</xliff:g></string>
    <!-- Bluetooth device details. The title of a confirmation dialog for unpairing a paired device. [CHAR LIMIT=60] -->
    <string name="bluetooth_unpair_dialog_title">Forget device?</string>

    <!--  Bluetooth device details. The body of a confirmation dialog for unpairing a paired device. -->
    <string name="bluetooth_unpair_dialog_body" product="default">Your phone will no longer be paired with <xliff:g id="device_name">%1$s</xliff:g></string>
    <!--  Bluetooth device details. The body of a confirmation dialog for unpairing a paired device. -->
    <string name="bluetooth_unpair_dialog_body" product="tablet">Your tablet will no longer be paired with <xliff:g id="device_name">%1$s</xliff:g></string>
    <!--  Bluetooth device details. The body of a confirmation dialog for unpairing a paired device. -->
    <string name="bluetooth_unpair_dialog_body" product="device">Your device will no longer be paired with <xliff:g id="device_name">%1$s</xliff:g></string>

    <!--  Bluetooth device details. In the confirmation dialog for unpairing a paired device, this is the label on the button that will complete the unpairing action. -->
    <string name="bluetooth_unpair_dialog_forget_confirm_button">Forget device</string>

    <!-- Bluetooth settings.  The title of the screen to pick which profiles to connect to on the device.  For example, headphones may have both A2DP and headset, this allows the user to choose which one he wants to connect to. -->
    <string name="bluetooth_connect_specific_profiles_title">Connect to\u2026</string>

    <!-- Bluetooth settings.  Message for disconnecting from the A2DP profile. [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_a2dp_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from media audio.</string>
    <!-- Bluetooth settings.  Message for disconnecting from the headset profile. [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_headset_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from handsfree audio.</string>
    <!-- Bluetooth settings.  Message for disconnecting from the HID profile. [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_hid_profile"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from input device.</string>
    <!-- Bluetooth settings.  Message for disconnecting from the PAN profile (user role). [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_pan_user_profile">Internet access via <xliff:g id="device_name">%1$s</xliff:g> will be disconnected.</string>
    <!-- Bluetooth settings.  Message for disconnecting from the PAN profile (NAP role). [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_pan_nap_profile" product="tablet"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from sharing this tablet\u2019s Internet connection.</string>
    <!-- Bluetooth settings.  Message for disconnecting from the PAN profile (NAP role). [CHAR LIMIT=80] -->
    <string name="bluetooth_disconnect_pan_nap_profile" product="default"><xliff:g id="device_name">%1$s</xliff:g> will be disconnected from sharing this phone\u2019s Internet connection.</string>

    <!-- Bluetooth settings.  Connection options screen.  The title of the screen. [CHAR LIMIT=40] -->
    <string name="bluetooth_device_advanced_title">Paired Bluetooth device</string>
    <!-- Bluetooth settings.  Connection options screen.  The title of the checkbox that controls whether the device is in "online" mode or "offline" mode.  This essentially is the checkbox that controls whether any checks / unchecks on a profile should be applied immediately, or next time the device is connected. -->
    <string name="bluetooth_device_advanced_online_mode_title">Connect</string>
    <!-- Bluetooth settings.  Connection options screen.  The summary of the online mode checkbox.  This describes what the setting does in the context of the screen. -->
    <string name="bluetooth_device_advanced_online_mode_summary">Connect to Bluetooth device</string>
    <!-- Bluetooth settings.  Connection options screen.  The title of the header that is above all of the profiles.
         When a user decides what Bluetooth capabilities to use with the device.  -->
    <string name="bluetooth_device_advanced_profile_header_title">Use for</string>
    <!-- Bluetooth settings. Connection options screen. Title for option to rename the device. [CHAR LIMIT=30] -->
    <string name="bluetooth_device_advanced_rename_device">Rename</string>
    <!-- Bluetooth settings. Connection options screen. Title for checkbox to enable incoming file transfers [CHAR LIMIT=30] -->
    <string name="bluetooth_device_advanced_enable_opp_title">Allow incoming file transfers</string>
    <!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (user role). [CHAR LIMIT=25]-->
    <string name="bluetooth_pan_user_profile_summary_connected">Connected to device for Internet access</string>
    <!-- Bluetooth settings. Connection options screen. The summary for the checkbox preference when PAN is connected (NAP role). [CHAR LIMIT=25]-->
    <string name="bluetooth_pan_nap_profile_summary_connected">Sharing local Internet connection with device</string>

    <!-- Bluetooth settings.  Dock Setting Title -->
    <string name="bluetooth_dock_settings">Dock Settings</string>
    <!-- Bluetooth settings.  Dock Setting Dialog Title -->
    <string name="bluetooth_dock_settings_title">Use dock for audio</string>
    <!-- Bluetooth settings.  Dock Setting Dialog - Checkbox selection 1: Use dock as speaker phone -->
    <string name="bluetooth_dock_settings_headset">As speaker phone</string>
    <!-- Bluetooth settings.  Dock Setting Dialog - Checkbox selection 2: Use dock for media audio -->
    <string name="bluetooth_dock_settings_a2dp">For music and media</string>
    <!-- Bluetooth settings.  Dock Setting Dialog - Remember setting and don't ask user again -->
    <string name="bluetooth_dock_settings_remember">Remember settings</string>

    <!-- Wifi Display settings. The title of the screen. [CHAR LIMIT=40] -->
    <string name="wifi_display_settings_title">Cast</string>
    <!-- Wifi Display settings. The title of a menu item to enable wireless display [CHAR LIMIT=40] -->
    <string name="wifi_display_enable_menu_item">Enable wireless display</string>
    <!-- Wifi Display settings. Text that appears when scanning for devices is finished and no nearby device was found [CHAR LIMIT=40]-->
    <string name="wifi_display_no_devices_found">No nearby devices were found.</string>
    <!-- Wifi Display settings. The status summary for connecting devices. [CHAR LIMIT=40] -->
    <string name="wifi_display_status_connecting">Connecting</string>
    <!-- Wifi Display settings. The status summary for connected devices. [CHAR LIMIT=40] -->
    <string name="wifi_display_status_connected">Connected</string>
    <!-- Wifi Display settings. The status summary for devices that's already in use. [CHAR LIMIT=40] -->
    <string name="wifi_display_status_in_use">In use</string>
    <!-- Wifi Display settings. The status summary for devices that's not available. [CHAR LIMIT=40] -->
    <string name="wifi_display_status_not_available">Unavailable</string>
    <!-- Wifi Display settings. Image description for device details button. This opens the screen to rename, unpair, etc. a single device. -->
    <string name="wifi_display_details">Display settings</string>

    <!-- Wifi Display settings. Options dialog.  The title of the dialog. [CHAR LIMIT=40] -->
    <string name="wifi_display_options_title">Wireless display options</string>
    <!-- Wifi Display settings. Options dialog.  The forget button text. [CHAR LIMIT=20] -->
    <string name="wifi_display_options_forget">Forget</string>
    <!-- Wifi Display settings. Options dialog.  The done button text. [CHAR LIMIT=20] -->
    <string name="wifi_display_options_done">Done</string>
    <!-- Wifi Display settings. Options dialog.  The name label used when prompting the user to rename the display. [CHAR LIMIT=20] -->
    <string name="wifi_display_options_name">Name</string>

    <!-- Wifi Display settings. The sub heading for wireless display certification options. [CHAR LIMIT=40] -->
    <string name="wifi_display_certification_heading" translatable="false">Certification</string>
    <!-- Wifi Display settings. The section title for wireless display session info. [CHAR LIMIT=40] -->
    <string name="wifi_display_session_info" translatable="false">Session info</string>
    <!-- Wifi Display settings. The checkbox title for enabling listen mode during certification process. [CHAR LIMIT=40] -->
    <string name="wifi_display_listen_mode" translatable="false">Enable listen mode</string>
    <!-- Wifi Display settings. The checkbox title for enabling autonomous GO during certification process. [CHAR LIMIT=40] -->
    <string name="wifi_display_autonomous_go" translatable="false">Enable autonomous GO</string>
    <!-- Wifi Display settings. The button text for sending pause trigger during certification process. [CHAR LIMIT=40] -->
    <string name="wifi_display_pause" translatable="false">Pause</string>
    <!-- Wifi Display settings. The button text for sending play (resume) trigger during certification process. [CHAR LIMIT=40] -->
    <string name="wifi_display_resume" translatable="false">Resume</string>
    <!-- Wifi Display settings. The dropdown menu title for choosing WPS configuration during certification process. [CHAR LIMIT=40] -->
    <string name="wifi_display_wps_config" translatable="false">WPS configuration</string>
    <!-- Wifi Display settings. The dropdown menu title for choosing listen channel during certification process. [CHAR LIMIT=40] -->
    <string name="wifi_display_listen_channel" translatable="false">Listen channel</string>
    <!-- Wifi Display settings. The dropdown menu title for choosing operating channel during certification process. [CHAR LIMIT=40] -->
    <string name="wifi_display_operating_channel" translatable="false">Operating channel</string>
    <!-- Wifi 2.4GHz is used as an universal itendifier for 2.4GHz band -->
    <string name="wifi_band_24ghz">2.4 GHz</string>
    <!-- Wifi Internal 5GHz as an universal itendifier for 5GHz band -->
    <string name="wifi_band_5ghz">5 GHz</string>
    <!-- Link speed on Wifi Status screen -->
    <string name="link_speed">%1$d Mbps</string>

    <!-- This string asks the user whether or not to allow an app to enable WiFi. [CHAR LIMIT=NONE] -->
    <string name="wifi_ask_enable"><xliff:g id="requester" example="FancyApp">%s</xliff:g> wants to turn on Wi-Fi</string>
    <!-- This string asks the user whether or not to allow an app to disable WiFi. [CHAR LIMIT=NONE] -->
    <string name="wifi_ask_disable"><xliff:g id="requester" example="FancyApp">%s</xliff:g> wants to turn off Wi-Fi</string>

    <!-- NFC settings -->
    <!-- Used in the 1st-level settings screen to turn on NFC -->
    <string name="nfc_quick_toggle_title">NFC</string>
    <!-- Description of NFC in the 1st level settings screen, for a tablet. [CHAR LIMIT=NONE] -->
    <string name="nfc_quick_toggle_summary" product="tablet">Allow data exchange when the tablet touches another device</string>
    <!-- Description of NFC in the 1st level settings screen, for a phone. [CHAR LIMIT=NONE] -->
    <string name="nfc_quick_toggle_summary" product="default">Allow data exchange when the phone touches another device</string>
    <!-- Dialog title for NFC disclaimer [CHAR_LIMIT=40]-->
    <string name="nfc_disclaimer_title">Turn on NFC</string>
    <!-- Dialog content for NFC disclaimer: telling user NFC can exchange data when device is nearby other devices (for example: payment terminals, badge reader etc). [CHAR_LIMIT=NONE]-->
    <string name="nfc_disclaimer_content">NFC exchanges data between this device and other nearby devices or targets, such as payment terminals, access readers, and interactive ads or tags.</string>

    <!-- Used to enter the Android Beam sharing preferences screen. This phrase is a trademark. [CHAR LIMIT=32] -->
    <string name="android_beam_settings_title">Android Beam</string>
    <!-- Used to describe the on state of the Android Beam feature [CHAR LIMIT=NONE] -->
    <string name="android_beam_on_summary">Ready to transmit app content via NFC</string>
    <!-- Used to describe the off state of the Android Beam feature [CHAR LIMIT=NONE] -->
    <string name="android_beam_off_summary">Off</string>
    <!-- Used to describe the enabled state of the Android Beam feature when NFC, which it relies on, is turned off [CHAR LIMIT=NONE] -->
    <string name="android_beam_disabled_summary">Unavailable because NFC is turned off</string>
    <!-- Used in the Android Beam sharing preferences screen. This phrase is a trademark. [CHAR LIMIT=32] -->
    <string name="android_beam_label">Android Beam</string>
    <!-- Explanation of the Android Beam feature in the Android Beam settings panel. The use of "beam" here is as a verb and not considered trademarked. [CHAR LIMIT=NONE] -->
    <string name="android_beam_explained">When this feature is turned on, you can beam app content to another NFC-capable device by holding the devices close together. For example, you can beam web pages, YouTube videos, contacts, and more.\n\nJust bring the devices together (typically back to back) and then tap your screen. The app determines what gets beamed.</string>

    <!-- Wi-Fi Settings --> <skip />
    <!-- Used in the 1st-level settings screen to turn on Wi-Fi -->
    <string name="wifi_quick_toggle_title">Wi\u2011Fi</string>
    <!-- Used in the 1st-level settings screen as the turn-on summary -->
    <string name="wifi_quick_toggle_summary">Turn on Wi\u2011Fi</string>
    <!-- Used in the 1st-level settings screen to go to the 2nd-level settings screen  [CHAR LIMIT=20]-->
    <string name="wifi_settings">Wi\u2011Fi</string>
    <!-- Title of the Wi-fi settings screen -->
    <string name="wifi_settings_category">Wi\u2011Fi settings</string>
    <!-- Title of the Wi-fi settings entry in the left top level menu -->
    <string name="wifi_settings_title">Wi\u2011Fi</string>
    <!-- Summary text of the Wi-fi settings screen -->
    <string name="wifi_settings_summary">Set up &amp; manage wireless access points</string>
    <!-- Used by Account creation for turning on Wi-Fi  [CHAR LIMIT=60] -->
    <string name="wifi_select_network">Select Wi\u2011Fi</string>
    <!-- Summary text when turning Wi-Fi or bluetooth on -->
    <string name="wifi_starting">Turning Wi\u2011Fi on\u2026</string>
    <!-- Summary text when turning Wi-Fi or bluetooth off -->
    <string name="wifi_stopping">Turning off Wi\u2011Fi\u2026</string>
    <!-- Summary text when Wi-Fi or bluetooth has error -->
    <string name="wifi_error">Error</string>
    <!-- Summary text when wifi SoftAP started failed due to no legal usable channel allowed in this region by regulatory -->
    <string name="wifi_sap_no_channel_error">5 GHz band not available in this country</string>
    <!-- Toast message when Wi-Fi or bluetooth is disallowed in airplane mode -->
    <string name="wifi_in_airplane_mode">In Airplane mode</string>
    <!-- Checkbox title for option to notify user when open networks are nearby -->
    <string name="wifi_notify_open_networks">Open network notification</string>
    <!-- Checkbox summary for option to notify user when open networks are nearby-->
    <string name="wifi_notify_open_networks_summary">Notify when a high\u2011quality public network is available</string>
    <!-- Checkbox title for option to enable Wi-Fi when saved networks are nearby -->
    <string name="wifi_wakeup">Turn on Wi\u2011Fi automatically</string>
    <!-- Checkbox summary for option to enable Wi-Fi when high quality saved networks are nearby-->
    <string name="wifi_wakeup_summary">Wi\u2011Fi will turn back on near high\u2011quality saved networks, like your home network</string>
    <!-- Checkbox summary for Wi-Fi wakeup option to explain that Wi-Fi wakeup is disabled because Wi-Fi scanning is turned off -->
    <string name="wifi_wakeup_summary_scanning_disabled">Unavailable because Wi\u2011Fi scanning is turned off</string>
    <!-- Checkbox summary for Wi-Fi wakeup option to explain that a network rating provider needs to be selected to use the feature. -->
    <string name="wifi_wakeup_summary_scoring_disabled">To use, select a network rating provider</string>
    <!-- Checkbox title for option to toggle poor network detection -->
    <string name="wifi_poor_network_detection">Avoid poor connections</string>
    <!-- Checkbox summary for option to toggle poor network detection -->
    <string name="wifi_poor_network_detection_summary">Don\u2019t use a Wi\u2011Fi network unless it has a good Internet connection</string>
    <!-- Checkbox summary for option to toggle poor network detection [CHAR LIMIT=60] -->
    <string name="wifi_avoid_poor_network_detection_summary">Only use networks that have a good Internet connection</string>
    <!-- Checkbox title for option to connect to open Wi-Fi automatically [CHAR LIMIT=40] -->
    <string name="use_open_wifi_automatically_title">Connect to open networks</string>
    <!-- Checkbox summary for option to connect to open Wi-Fi automatically  [CHAR LIMIT=100] -->
    <string name="use_open_wifi_automatically_summary">Automatically connect to high\u2011quality public networks</string>
    <!-- Checkbox summary for option to connect to open Wi-Fi automatically, to explain that a network rating provider needs to be selected to use the feature. -->
    <string name="use_open_wifi_automatically_summary_scoring_disabled">To use, select a network rating provider</string>
    <!-- Checkbox summary for option to connect to open Wi-Fi automatically, to explain that a compatible network rating provider needs to be selected to use the feature. -->
    <string name="use_open_wifi_automatically_summary_scorer_unsupported_disabled">To use, select a compatible network rating provider</string>
    <!-- Preference title for option to install certificates -->
    <string name="wifi_install_credentials">Install certificates</string>
    <!-- Message to describe "Wi-Fi scan always available feature" when Wi-Fi is off and Wi-Fi
      scanning is on. The place-holders "LINK_BEGIN" and "LINK_END" must NOT be translated. They
      mark a link to bring the user to "scanning settings" screen. -->
    <string name="wifi_scan_notify_text">To improve location accuracy, system apps and services can
        still scan for Wi\u2011Fi networks. You can change this in
        <xliff:g id="link_begin">LINK_BEGIN</xliff:g>scanning
        settings<xliff:g id="link_end">LINK_END</xliff:g>.</string>
    <!-- Message to describe "Wi-Fi scan always available feature" when Wi-Fi is off and Wi-Fi
      scanning is also off. The place-holders "LINK_BEGIN" and "LINK_END" must NOT be translated.
      They mark a link to bring the user to "scanning settings" screen. -->
    <string name="wifi_scan_notify_text_scanning_off">To improve location accuracy,
        turn on Wi-Fi scanning in
        <xliff:g id="link_begin">LINK_BEGIN</xliff:g>scanning
        settings<xliff:g id="link_end">LINK_END</xliff:g>.</string>
    <!-- Wifi scan always mode checkbox text -->
    <string name="wifi_scan_notify_remember_choice">Don\u2019t show again</string>
    <!-- Setting title for setting the wifi sleep policy. Do we keep Wi-Fi active when the screen turns off? -->
    <string name="wifi_setting_sleep_policy_title">Keep Wi\u2011Fi on during sleep</string>
    <!-- Setting title for setting the wifi sleep policy. Do we keep Wi-Fi active when the screen turns off? [CHAR LIMIT=30] -->
    <string name="wifi_setting_on_during_sleep_title">Wi\u2011Fi on during sleep</string>
    <!-- Generic error message when the sleep policy could not be set. -->
    <string name="wifi_setting_sleep_policy_error">There was a problem changing the setting</string>
    <!-- Checkbox title for option to toggle suspend power optimizations [CHAR LIMIT=30] -->
    <string name="wifi_suspend_efficiency_title">Improve efficiency</string>
    <!-- Checkbox title for option to toggle suspend power optimizations -->
    <string name="wifi_suspend_optimizations">Wi\u2011Fi optimization</string>
    <!-- Checkbox summary for option to toggle suspend power optimizations -->
    <string name="wifi_suspend_optimizations_summary">Minimize battery usage when Wi\u2011Fi is on</string>
    <!-- Checkbox summary for option to toggle suspend power optimizations [CHAR LIMIT=30] -->
    <string name="wifi_limit_optimizations_summary">Limit battery used by Wi\u2011Fi</string>
    <!-- Checkbox title. Should we switch to using cellular data if Wi-Fi is still connected but the Wi-Fi network we're connected to no longer has Internet access (e.g., due to an outage)? -->
    <string name="wifi_switch_away_when_unvalidated">Switch to mobile data if Wi\u2011Fi loses Internet access.</string>
    <!-- Preference title for option to automatically switch away from bad wifi networks [CHAR LIMIT=60]-->
    <string name="wifi_cellular_data_fallback_title">Switch to mobile data automatically</string>
    <!-- Preference summary to automatically switch away from bad wifi networks [CHAR LIMIT=None]-->
    <string name="wifi_cellular_data_fallback_summary">Use mobile data when Wi\u2011Fi has no Internet access. Data usage may apply.</string>
    <!-- Action bar text message to manually add a wifi network [CHAR LIMIT=20]-->
    <string name="wifi_add_network">Add network</string>
    <!-- Action bar title to open additional Wi-Fi settings-->
    <string name="wifi_configure_settings_preference_title">Wi\u2011Fi preferences</string>
    <!-- Summary for Wi-Fi Preferences that explains that Wi-Fi will be enabled when high quality saved networks are nearby-->
    <string name="wifi_configure_settings_preference_summary_wakeup_on">Wi\u2011Fi turns back on automatically</string>
    <!-- Summary for Wi-Fi Preferences that explains that Wi-Fi will not automatically be enabled when high quality saved networks are nearby-->
    <string name="wifi_configure_settings_preference_summary_wakeup_off">Wi\u2011Fi doesn\u0027t turn back on automatically</string>
    <!-- Header for the list of wifi networks-->
    <string name="wifi_access_points">Wi\u2011Fi networks</string>
    <!-- Menu option to do WPS Push Button [CHAR LIMIT=25]-->
    <string name="wifi_menu_wps_pbc">WPS Push Button</string>
    <!-- Content description for menu button in Wifi setup. Not shown on the screen. [CHAR LIMIT=NONE] -->
    <string name="wifi_menu_more_options">More options</string>
    <!-- Menu option to do WPS Pin Entry [CHAR LIMIT=25]-->
    <string name="wifi_menu_wps_pin">WPS Pin Entry</string>
    <!-- Menu option to launch Wi-Fi Direct settings [CHAR LIMIT=20]-->
    <string name="wifi_menu_p2p">Wi\u2011Fi Direct</string>
    <!-- Menu option to scan Wi-Fi networks -->
    <string name="wifi_menu_scan">Scan</string>
    <!-- Menu option to Wi-Fi advanced settings -->
    <string name="wifi_menu_advanced">Advanced</string>
    <!-- Menu option to Wi-Fi configure settings -->
    <string name="wifi_menu_configure">Configure</string>
    <!-- Menu option to connect to a Wi-Fi network -->
    <string name="wifi_menu_connect">Connect to network</string>
    <!-- Menu option to remember a temporary Wi-Fi network -->
    <string name="wifi_menu_remember">Remember network</string>
    <!-- Menu option to delete a Wi-Fi network -->
    <string name="wifi_menu_forget">Forget network</string>
    <!-- Menu option to modify a Wi-Fi network configuration -->
    <string name="wifi_menu_modify">Modify network</string>
    <!-- Menu option to write a Wi-Fi configuration token to an NFC tag [CHAR_LIMIT=30]-->
    <string name="wifi_menu_write_to_nfc">Write to NFC tag</string>
    <!-- Wi-Fi settings. text displayed when Wi-Fi is off and network list is empty [CHAR LIMIT=50]-->
    <string name="wifi_empty_list_wifi_off">To see available networks, turn Wi\u2011Fi on.</string>
    <!-- Wi-Fi settings. text displayed when Wi-Fi is on and network list is empty [CHAR LIMIT=50]-->
    <string name="wifi_empty_list_wifi_on">Searching for Wi\u2011Fi networks\u2026</string>
    <!-- Wifi Settings. text displayed when user has restriction DISALLOW_CONFIG_WIFI [CHAR LIMIT=NONE]-->
    <string name="wifi_empty_list_user_restricted">You don\u2019t have permission to change the Wi\u2011Fi network.</string>
    <!-- Wi-Fi settings. content description for more button [CHAR LIMIT=50]-->
    <string name="wifi_more">More</string>
    <!-- Wi-Fi settings. wps menu title [CHAR LIMIT=25]-->
    <string name="wifi_setup_wps">Automatic setup (WPS)</string>

    <!-- Dialog for Access Points --> <skip />
    <!-- Label to show/hide advanced options [CHAR LIMIT=40] -->
    <string name="wifi_show_advanced">Advanced options</string>
    <!-- Message for talkback to say when Advanced Options expanded [CHAR LIMIT=NONE] -->
    <string name="wifi_advanced_toggle_description_expanded">Drop down list Advanced Options. Double-tap to collapse.</string>
    <!-- Message for talkback to say when Advanced Options is collapsed [CHAR LIMIT=NONE] -->
    <string name="wifi_advanced_toggle_description_collapsed">Drop down list Advanced Options. Double-tap to expand.</string>
    <!-- Title for the WPS setup dialog [CHAR LIMIT=50] -->
    <string name="wifi_wps_setup_title">Wi\u2011Fi Protected Setup</string>
    <!-- Message in WPS dialog at start up [CHAR LIMIT=150] -->
    <string name="wifi_wps_setup_msg">Starting WPS\u2026</string>
    <!-- Message in WPS dialog for PBC after start up [CHAR LIMIT=150] -->
    <string name="wifi_wps_onstart_pbc">Press the Wi\u2011Fi Protected Setup button on your router. It may be called \u201cWPS\u201d or marked with this symbol:</string>
    <!-- Message in WPS dialog for PIN after start up [CHAR LIMIT=150] -->
    <string name="wifi_wps_onstart_pin">Enter pin <xliff:g id="number">%1$s</xliff:g> on your Wi\u2011Fi router. The setup can take up to two minutes to complete.</string>
    <!-- Text displayed when WPS succeeds [CHAR LIMIT=150] -->
    <string name="wifi_wps_complete">WPS succeeded. Connecting to the network\u2026</string>
    <!-- Text displayed when Wi-Fi is connected through WPS [CHAR LIMIT=150] -->
    <string name="wifi_wps_connected">Connected to Wi\u2011Fi network <xliff:g id="network_name">%s</xliff:g></string>
    <!-- Text displayed when WPS setup is in progress [CHAR LIMIT=150] -->
    <string name="wifi_wps_in_progress">WPS is already in progress and can take up to two minutes to complete</string>
    <!-- Text displayed when WPS fails to start [CHAR LIMIT=150] -->
    <string name="wifi_wps_failed_generic">WPS failed. Please try again in a few minutes.</string>
    <!-- Text displayed when WPS fails due to WEP [CHAR LIMIT=150] -->
    <string name="wifi_wps_failed_wep">The wireless router security setting (WEP) is not supported</string>
    <!-- Text displayed when WPS fails to TKIP [CHAR LIMIT=150] -->
    <string name="wifi_wps_failed_tkip">The wireless router security setting (TKIP) is not supported</string>
    <!-- Text displayed when WPS fails due to authentication issues [CHAR LIMIT=150] -->
    <string name="wifi_wps_failed_auth">Authentication failure. Please try again.</string>
    <!-- Text displayed when WPS fails due to another session [CHAR LIMIT=150] -->
    <string name="wifi_wps_failed_overlap">Another WPS session was detected. Please try again in a few minutes.</string>
    <!-- Label for the SSID of the network -->
    <string name="wifi_ssid">Network name</string>
    <!-- Hint for a text field to enter the SSID of a hidden wifi network. [CHAR LIMIT=35] -->
    <string name="wifi_ssid_hint">Enter the SSID</string>
    <!-- Label for the security of the connection -->
    <string name="wifi_security">Security</string>
    <!-- Label for the signal strength of the connection -->
    <string name="wifi_signal">Signal strength</string>
    <!-- Label for the status of the connection -->
    <string name="wifi_status">Status</string>
    <!-- Label for the link speed of the connection -->
    <string name="wifi_speed">Link speed</string>
    <!-- Label for the frequency band of the connection -->
    <string name="wifi_frequency">Frequency</string>
    <!-- Label for the IP address of the connection -->
    <string name="wifi_ip_address">IP address</string>
    <!-- Label for Passpoint network -->
    <string name="passpoint_label">Saved via</string>
    <!-- Content for Passpoint network -->
    <string name="passpoint_content"><xliff:g id="name">%1$s</xliff:g> credentials</string>
    <!-- Label for the EAP method of the network -->
    <string name="wifi_eap_method">EAP method</string>
    <!-- Label for the phase2 -->
    <string name="please_select_phase2">Phase 2 authentication</string>
    <!-- Label for the EAP CA certificate of the network -->
    <string name="wifi_eap_ca_cert">CA certificate</string>
    <!-- Label for the domain name that the EAP CA certificate(s) can be used to validate. -->
    <string name="wifi_eap_domain">Domain</string>
    <!-- Label for the EAP user certificate of the network -->
    <string name="wifi_eap_user_cert">User certificate</string>
    <!-- Label for the EAP identity of the network -->
    <string name="wifi_eap_identity">Identity</string>
    <!-- Label for the EAP anonymous identity of the network -->
    <string name="wifi_eap_anonymous">Anonymous identity</string>
    <!-- Label for the password of the secured network -->
    <string name="wifi_password">Password</string>
    <!-- Label for the check box to show password -->
    <string name="wifi_show_password">Show password</string>
    <!-- Label for the RadioGroup to choose wifi ap band -->
    <string name="wifi_ap_band_config">Select AP Band</string>
    <!-- Label for the radio button to choose wifi ap 2.4 GHz band -->
    <string name="wifi_ap_choose_2G">2.4 GHz Band</string>
    <!-- Label for the radio button to choose wifi ap 5GHz band -->
    <string name="wifi_ap_choose_5G">5 GHz Band</string>
    <!-- Label for the spinner to show ip settings [CHAR LIMIT=25] -->
    <string name="wifi_ip_settings">IP settings</string>
    <!-- Label for the check box to share a network with other users on the same device -->
    <string name="wifi_shared">Share with other device users</string>
    <!-- Hint for unchanged fields -->
    <string name="wifi_unchanged">(unchanged)</string>
    <!-- Hint for unspecified fields -->
    <string name="wifi_unspecified">Please select</string>
    <!-- Hint for multiple certificates being added to the configuration -->
    <string name="wifi_multiple_cert_added">(Multiple certificates added)</string>
    <!-- Menu option for using trusted system CA certificates to validate EAP servers -->
    <string name="wifi_use_system_certs">Use system certificates</string>
    <!-- Menu option for not providing an EAP user certificate -->
    <string name="wifi_do_not_provide_eap_user_cert">Do not provide</string>
    <!-- Menu option for not validating the EAP server -->
    <string name="wifi_do_not_validate_eap_server">Do not validate</string>
    <!-- Warning message displayed if user choses not to validate the EAP server -->
    <string name="wifi_do_not_validate_eap_server_warning">No certificate specified. Your connection will not be private.</string>
    <!-- Warning message displayed if network name (ssid) is too long -->
    <string name="wifi_ssid_too_long">Network name is too long.</string>
    <!-- Warning message displayed if user does not specify a domain for the CA certificate.
         Only displayed if the user also chooses to use system certificates. -->
    <string name="wifi_no_domain_warning">Must specify a domain.</string>
    <!-- Substring of status line when Wi-Fi Protected Setup (WPS) is available and
         string is listed first [CHAR LIMIT=20]-->
    <string name="wifi_wps_available_first_item">WPS available</string>
    <!-- Substring of wifi status when Wi-Fi Protected Setup (WPS) is available and
         string is listed after a wifi_secured_* string-->
    <string name="wifi_wps_available_second_item">\u0020(WPS available)</string>
    <!-- Message in WriteWifiConfigToNfcDialog when prompted to enter network password [CHAR_LIMIT=40] -->
    <string name="wifi_wps_nfc_enter_password">Enter your network password</string>

    <!-- Message in dialog when the user tries to connect to a carrier network[CHAR_LIMIT=40] -->
    <string name="wifi_carrier_connect">Carrier Wi\u2011Fi network</string>
    <!-- Message in dialog when the user tries to connect to a carrier network[CHAR_LIMIT=60] -->
    <string name="wifi_carrier_content">Connect via <xliff:g id="name">%1%s</xliff:g></string>

    <string name="wifi_scan_always_turnon_message">To improve location accuracy and for other purposes, <xliff:g id="app_name">%1$s</xliff:g> wants to turn on network scanning, even when Wi-Fi is off.\n\nAllow this for all apps that want to scan?</string>
    <!-- Message informing the user how to turn off  [CHAR LIMIT=200] -->
    <string name="wifi_scan_always_turnoff_message">To turn this off, go to Advanced in the overflow menu.</string>
    <string name="wifi_scan_always_confirm_allow">Allow</string>
    <string name="wifi_scan_always_confirm_deny">Deny</string>

    <!-- Dialog label to sign in to a Hotspot. [CHAR LIMIT=50]-->
    <string name="wifi_hotspot_title">Sign in to connect?</string>
    <!-- Dialog message to sign in to a Hotspot. [CHAR LIMIT=50]-->
    <string name="wifi_hotspot_message"><xliff:g id="app_name">%1$s</xliff:g> requires you to sign in online before you connect to the network.</string>
    <!-- Wifi settings button to connect in to a Hotspot. [CHAR LIMIT=50]-->
    <string name="wifi_hotspot_connect">CONNECT</string>

    <!-- Dialog text to tell the user that the selected network does not have Internet access. -->
    <string name="no_internet_access_text">This network has no Internet access. Stay connected?</string>
    <string name="no_internet_access_remember">Don\u2019t ask again for this network</string>

    <!-- Dialog text to tell the user that the selected network has lost Internet access, and asking the user whether they want to avoid this network. -->
    <string name="lost_internet_access_title">Wi\u2011Fi is not connected to the Internet</string>
    <string name="lost_internet_access_text">You can switch to the mobile network whenever Wi\u2011Fi has a bad connection. Data usage charges may apply.</string>
    <!-- Button text to let user switch to mobile data -->
    <string name="lost_internet_access_switch">Switch to mobile</string>
    <string name="lost_internet_access_cancel">Stay on Wi\u2011Fi</string>
    <string name="lost_internet_access_persist">Never show again</string>

    <!-- Button label to connect to a Wi-Fi network -->
    <string name="wifi_connect">Connect</string>
    <!-- Failured notification for connect -->
    <string name="wifi_failed_connect_message">Failed to connect to network</string>
    <!-- Button label to delete a Wi-Fi network -->
    <string name="wifi_forget">Forget</string>
    <!-- Button label to modify a Wi-Fi network -->
    <string name="wifi_modify">Modify</string>
    <!-- Failured notification for forget -->
    <string name="wifi_failed_forget_message">Failed to forget network</string>
    <!-- Button label to save a Wi-Fi network configuration -->
    <string name="wifi_save">Save</string>
    <!-- Failured notification for save -->
    <string name="wifi_failed_save_message">Failed to save network</string>
    <!-- Button label to dismiss the dialog -->
    <string name="wifi_cancel">Cancel</string>

    <!-- Wi-Fi Advanced Settings --> <skip />
    <!-- Wi-Fi settings screen, Saved networks, settings section.  This is a header shown above Saved networks wifi settings. [CHAR LIMIT=30] -->
    <string name="wifi_saved_access_points_titlebar">Saved networks</string>
    <!-- Wi-Fi settings screen, Saved networks summary.  This shows below the "Saved networks" item and indicates the number of networks a user has saved. -->
    <plurals name="wifi_saved_access_points_summary">
        <item quantity="one">1 network</item>
        <item quantity="other">%d networks</item>
    </plurals>
    <!-- Wi-Fi settings screen, advanced, settings section.  This is a header shown above advanced wifi settings. [CHAR LIMIT=30] -->
    <string name="wifi_advanced_titlebar">Advanced Wi\u2011Fi</string>
    <!-- Wi-Fi settings screen, advanced, title of the item to show the Wi-Fi device's MAC address. -->
    <string name="wifi_advanced_mac_address_title">MAC address</string>
    <!-- Title of the screen to adjust IP settings -->
    <!-- Wi-Fi settings screen, advanced, title of the item to show the Wi-Fi device's current IP address. -->
    <string name="wifi_advanced_ip_address_title">IP address</string>

    <!-- Wifi Network Details -->
    <!-- Wifi details title-->
    <string name="wifi_details_title">Network info</string>
    <!-- Wifi details preference title to display router IP subnet mask -->
    <string name="wifi_details_subnet_mask">Subnet mask</string>
    <!-- Wifi details preference title to display router DNS info -->
    <string name="wifi_details_dns">DNS</string>
    <!-- Wifi details preference category title for IPv6 information -->
    <string name="wifi_details_ipv6_address_header">IPv6 addresses</string>

    <!-- Wifi saved access points.  Used as a label under the shortcut icon that goes to Wifi saved access points. [CHAR LIMIT=20] -->
    <string name="wifi_saved_access_points_label">Saved networks</string>
    <!-- Wifi Advanced settings.  Used as a label under the shortcut icon that goes to Wifi advanced settings. [CHAR LIMIT=20] -->
    <string name="wifi_advanced_settings_label">IP settings</string>
    <!-- Error message for users that aren't allowed to see or modify WiFi advanced settings [CHAR LIMIT=NONE] -->
    <string name="wifi_advanced_not_available">Wi\u2011Fi advanced settings are not available for this user</string>
    <!-- Menu item to save the IP settings -->
    <string name="wifi_ip_settings_menu_save">Save</string>
    <!-- Menu ietm to cancel the IP settings -->
    <string name="wifi_ip_settings_menu_cancel">Cancel</string>
    <!-- Error message if the IP address is not valid [CHAR LIMIT=50]-->
    <string name="wifi_ip_settings_invalid_ip_address">Type a valid IP address.</string>
    <!-- Error message if the gateway is not valid [CHAR LIMIT=50]-->
    <string name="wifi_ip_settings_invalid_gateway">Type a valid gateway address.</string>
    <!-- Error message if the dns is not valid [CHAR LIMIT=50]-->
    <string name="wifi_ip_settings_invalid_dns">Type a valid DNS address.</string>
    <!-- Error message if the network prefix length is not valid [CHAR LIMIT=50]-->
    <string name="wifi_ip_settings_invalid_network_prefix_length">Type a network prefix length between 0 and 32.</string>
    <!-- Label for the DNS (first one) -->
    <string name="wifi_dns1">DNS 1</string>
    <!-- Label for the DNS (second one)-->
    <string name="wifi_dns2">DNS 2</string>
    <!-- Label for the gateway of the network -->
    <string name="wifi_gateway">Gateway</string>
    <!-- Label for the network prefix of the network [CHAR LIMIT=25]-->
    <string name="wifi_network_prefix_length">Network prefix length</string>

    <!-- Wi-Fi p2p / Wi-Fi Direct settings -->
    <!-- Used in the 1st-level settings screen to launch Wi-fi Direct settings [CHAR LIMIT=25] -->
    <string name="wifi_p2p_settings_title">Wi\u2011Fi Direct</string>
    <string name="wifi_p2p_device_info">Device information</string>
    <string name="wifi_p2p_persist_network">Remember this connection</string>
    <!-- Menu option to discover peers-->
    <string name="wifi_p2p_menu_search">Search for devices</string>
    <!-- Menu option when discovery is in progress [CHAR LIMIT=25] -->
    <string name="wifi_p2p_menu_searching">Searching\u2026</string>
    <!-- Menu option to Rename-->
    <string name="wifi_p2p_menu_rename">Rename device</string>
    <!-- Title for available p2p devices -->
    <string name="wifi_p2p_peer_devices">Peer devices</string>
    <!-- Title for remembered p2p groups -->
    <string name="wifi_p2p_remembered_groups">Remembered groups</string>
    <!-- Toast text for a failed connection initiation -->
    <string name="wifi_p2p_failed_connect_message">Couldn\u2019t connect.</string>
    <!-- Message text for failure to rename -->
    <string name="wifi_p2p_failed_rename_message">Failed to rename device.</string>
    <!-- Title for disconnect dialog -->
    <string name="wifi_p2p_disconnect_title">Disconnect?</string>
    <!-- Message text for disconnection from one device-->
    <string name="wifi_p2p_disconnect_message">If you disconnect, your connection with <xliff:g id="peer_name">%1$s</xliff:g> will end.</string>
    <!-- Message text for disconnection from multiple devices-->
    <string name="wifi_p2p_disconnect_multiple_message">If you disconnect, your connection with <xliff:g id="peer_name">%1$s</xliff:g> and <xliff:g id="peer_count">%2$s</xliff:g> other devices will end.</string>
    <!-- Title for cancel connect dialog -->
    <string name="wifi_p2p_cancel_connect_title">Cancel invitation?</string>
    <!-- Message text for disconnection from one device-->
    <string name="wifi_p2p_cancel_connect_message">Do you want to cancel invitation to connect with <xliff:g id="peer_name">%1$s</xliff:g>?</string>
    <!-- Message text for remembered group deletion-->
    <string name="wifi_p2p_delete_group_message">Forget this group?</string>

    <!-- Wifi AP settings-->
    <!-- Label for Wifi tether checkbox. Toggles Access Point on/off  [CHAR LIMIT=30] -->
    <string name="wifi_hotspot_checkbox_text">Wi\u2011Fi hotspot</string>
    <!-- Summary text when turning hotspot off -->
    <string name="wifi_hotspot_off_subtext">Not sharing Internet or content with other devices</string>
    <!-- Summary text when tethering is on -->
    <string name="wifi_hotspot_tethering_on_subtext" product="tablet">Sharing this tablet\u2019s Internet connection via hotspot</string>
    <!-- Summary text when tethering is on -->
    <string name="wifi_hotspot_tethering_on_subtext" product="default">Sharing this phone\u2019s Internet connection via hotspot</string>
    <!-- Summary text when hotspot is on for local-only -->
    <string name="wifi_hotspot_on_local_only_subtext">App is sharing content. To share Internet connection, turn hotspot off, then on</string>

    <!-- Wifi hotspot settings -->
    <!-- Label for Wifi hotspot name. -->
    <string name="wifi_hotspot_name_title">Hotspot name</string>
    <!-- Summary for Wifi hotspot name when connection is in progress. -->
    <string name="wifi_hotspot_name_summary_connecting">Turning on <xliff:g id="wifi_hotspot_name">%1$s</xliff:g>...</string>
    <!-- Summary for Wifi hotspot name when connected. -->
    <string name="wifi_hotspot_name_summary_connected">Other devices can connect to <xliff:g id="wifi_hotspot_name">%1$s</xliff:g></string>
    <!-- Label for Wifi hotspot password. -->
    <string name="wifi_hotspot_password_title">Hotspot password</string>
    <!-- Label for Wifi hotspot AP Band. -->
    <string name="wifi_hotspot_ap_band_title">AP Band</string>
    <!-- Wifi hotspot footer info for regular hotspot [CHAR LIMIT=NONE]-->
    <string name="wifi_hotspot_footer_info_regular">Use hotspot to create a Wi\u2011Fi network for your other devices. Hotspot provides Internet using your mobile data connection. Additional mobile data charges may apply.</string>
    <!-- Wifi hotspot footer info [CHAR LIMIT=NONE]-->
    <string name="wifi_hotspot_footer_info_local_only">Apps can create a hotspot to share content with nearby devices.</string>

    <!-- Summary text when turning hotspot on -->
    <string name="wifi_tether_starting">Turning hotspot on\u2026</string>
    <!-- Summary text when turning hotspot off -->
    <string name="wifi_tether_stopping">Turning off hotspot\u2026</string>
    <!-- Subtext for wifi tether checkbox on success -->
    <string name="wifi_tether_enabled_subtext"><xliff:g id="network_ssid">%1$s</xliff:g> is active</string>
    <!-- Subtext for wifi tether checkbox on failure -->
    <string name="wifi_tether_failed_subtext">Portable Wi\u2011Fi hotspot error</string>
    <!-- Used to open the ssid and security dialog for Wifi Access Point -->
    <string name="wifi_tether_configure_ap_text">Set up Wi\u2011Fi hotspot</string>
    <!-- Used to open the ssid and security dialog for Wifi Access Point.  [CHAR LIMIT=30]-->
    <string name="wifi_hotspot_configure_ap_text">Wi\u2011Fi hotspot setup</string>
    <!-- Summary Used to open the ssid and security dialog for Wifi Access Point.  [CHAR LIMIT=60] -->
    <string name="wifi_hotspot_configure_ap_text_summary">AndroidAP WPA2 PSK hotspot</string>
    <!-- Subtext on configuration preference to indicate SSID and security chosen -->
    <string name="wifi_tether_configure_subtext"><xliff:g id="network_ssid">%1$s</xliff:g> <xliff:g id="network_security">%2$s</xliff:g> hotspot</string>
    <!-- Default access point SSID used for tethering -->
    <string name="wifi_tether_configure_ssid_default">AndroidHotspot</string>

    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Wi-Fi Testing on the diagnostic screen-->
    <string name="testing_wifi_info" translatable="false">Wi-Fi information</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item for WifiManager disableNetwork API-->
    <string name="disableNetwork" translatable="false">disableNetwork</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item for WifiManager enableNetwork API-->
    <string name="enableNetwork" translatable="false">enableNetwork</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item for WifiManager disconnect API-->
    <string name="disconnect" translatable="false">disconnect</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item for WifiManager getConfiguredNetworks API-->
    <string name="getConfiguredNetworks" translatable="false">getConfiguredNetworks</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item for WifiManager getConnectionInfo API-->
    <string name="getConnectionInfo" translatable="false">getConnectionInfo</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item on Wifi information screen-->
    <string name="wifi_api_test" translatable="false">Wi-Fi API</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item on Wifi information screen-->
    <string name="wifi_status_test" translatable="false">Wi-Fi status</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Button text on Wifi Status screen-->
    <string name="wifi_update" translatable="false">Refresh stats</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="wifi_state_label" translatable="false">Wi-Fi state:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="network_state_label" translatable="false">Network state:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
        Label on Wifi Status screen-->
    <string name="supplicant_state_label" translatable="false">Supplicant state:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="rssi_label" translatable="false">RSSI:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="bssid_label" translatable="false">BSSID:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="ssid_label" translatable="false">SSID:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="hidden_ssid_label" translatable="false">Hidden SSID:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="ipaddr_label" translatable="false">IPaddr:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="macaddr_label" translatable="false">MAC addr:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="networkid_label" translatable="false">Network ID:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="link_speed_label" translatable="false">Link speed:</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Status screen-->
    <string name="scan_list_label" translatable="false">Scan results:</string>

    <!-- wifi state values-->
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
    <string name="wifi_state_disabling" translatable="false">Disabling</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
    <string name="wifi_state_disabled" translatable="false">Disabled</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
    <string name="wifi_state_enabling" translatable="false">Enabling</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
    <string name="wifi_state_enabled" translatable="false">Enabled</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary -->
    <string name="wifi_state_unknown" translatable="false">Unknown</string>

    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Menu item on Wifi information screen-->
    <string name="wifi_config_info" translatable="false">Wi-Fi config</string>
    <!-- Do not translate. Used for diagnostic screens, precise translation is not necessary
         Label on Wifi Configuration screen-->
    <string name="config_list_label" translatable="false">Configured networks</string>

    <!-- Wireless networks, item title to go into the WFC settings [CHAR LIMIT=30] -->
    <string name="wifi_calling_settings_title">Wi-Fi calling</string>
    <!-- Title of suggestion to turn on wifi calling [CHAR LIMIT=30] -->
    <string name="wifi_calling_suggestion_title">Turn on Wi-Fi Calling</string>
    <!-- Summary of suggestion to turn on wifi calling [CHAR LIMIT=60] -->
    <string name="wifi_calling_suggestion_summary">Use Wi-Fi instead of mobile network</string>
    <!-- Title of WFC preference item [CHAR LIMIT=30] -->
    <string name="wifi_calling_mode_title">Calling preference</string>
    <!-- Title of WFC preference selection dialog [CHAR LIMIT=30] -->
    <string name="wifi_calling_mode_dialog_title">Wi-Fi calling mode</string>
    <!-- Title of WFC roaming preference item [CHAR LIMIT=45] -->
    <string name="wifi_calling_roaming_mode_title">Roaming preference</string>
    <!-- Summary of WFC roaming preference item [CHAR LIMIT=NONE]-->
    <string name="wifi_calling_roaming_mode_summary"><xliff:g id="wfc_roaming_preference" example="Wi-Fi">%1$s</xliff:g></string>
    <!-- WFC mode dialog [CHAR LIMIT=45] -->
    <string name="wifi_calling_roaming_mode_dialog_title">Roaming preference</string>
    <string-array name="wifi_calling_mode_choices">
        <item>Wi-Fi preferred</item>
        <item>Mobile preferred</item>
        <item>Wi-Fi only</item>
    </string-array>
    <string-array name="wifi_calling_mode_choices_v2">
        <item>Wi-Fi</item>
        <item>Mobile</item>
        <item>Wi-Fi only</item>
    </string-array>
    <string-array name="wifi_calling_mode_values">
        <item>"2"</item>
        <item>"1"</item>
        <item>"0"</item>
    </string-array>
    <string-array name="wifi_calling_mode_choices_without_wifi_only">
        <item>Wi-Fi preferred</item>
        <item>Mobile preferred</item>
    </string-array>
    <string-array name="wifi_calling_mode_choices_v2_without_wifi_only">
        <item>Wi-Fi</item>
        <item>Mobile</item>
    </string-array>
    <string-array name="wifi_calling_mode_values_without_wifi_only">
        <item>"2"</item>
        <item>"1"</item>
    </string-array>
    <!-- Wi-Fi Calling settings. Text displayed when Wi-Fi Calling is off -->
    <string name="wifi_calling_off_explanation">When Wi-Fi calling is on, your phone can route calls via Wi-Fi networks or your carrier\u2019s network, depending on your preference and which signal is stronger. Before turning on this feature, check with your carrier regarding fees and other details.</string>
    <!-- Wi-Fi Calling settings. Additional text displayed when Wi-Fi Calling is off. Default empty. [CHAR LIMIT=NONE] -->
    <string name="wifi_calling_off_explanation_2"></string>
    <!-- Title of a preference for updating emergency address [CHAR LIMIT=40] -->
    <string name="emergency_address_title">Update Emergency Address</string>
    <!-- Summary of Update Emergency Address preference, explaining usage of emergency address [CHAR LIMIT=NONE] -->
    <string name="emergency_address_summary">Address used by emergency services as your location if you make an emergency call using Wi\u2011Fi</string>


    <!-- Sound and alerts settings -->
    <skip/>
    <string name="display_settings_title">Display</string>
    <!-- Sound settings screen heading -->
    <string name="sound_settings">Sound</string>
    <!-- DO NOT TRANSLATE Summary placeholder -->
    <string name="summary_placeholder" translatable="false">&#160;</string>
    <!-- DO NOT TRANSLATE Summary placeholder reserving 2 lines -->
    <string name="summary_two_lines_placeholder" translatable="false">&#160;\n&#160;</string>

    <!-- DO NOT TRANSLATE Empty summary for dynamic preferences -->
    <string name="summary_empty" translatable="false"></string>
    <!-- Sound settings screen, volume title -->
    <string name="all_volume_title">Volumes</string>
    <!-- Sound settings screen, music effects title [CHAR LIMIT=30]-->
    <string name="musicfx_title">Music effects</string>
    <!-- Sound settings screen, setting option name -->
    <string name="ring_volume_title">Ring volume</string>
    <!-- Sound settings screen, setting option name checkbox -->
    <string name="vibrate_in_silent_title">Vibrate when silent</string>
    <!-- Sound settings screen, setting option name -->
    <string name="notification_sound_title">Default notification sound</string>
    <!-- Sound settings screen, the title of the volume bar to adjust the incoming call volume -->
    <string name="incoming_call_volume_title">Ringtone</string>
    <!-- Sound settings screen, the title of the volume bar to adjust the notification volume -->
    <string name="notification_volume_title">Notification</string>
    <!-- Sound settings screen, the caption of the checkbox for having the notification volume be
         the same as the incoming call volume. -->
    <string name="checkbox_notification_same_as_incoming_call">Use incoming call volume for notifications</string>

    <!-- Home settings screen, text indicating that a launcher does not support work profiles [CHAR LIMIT=100] -->
    <string name="home_work_profile_not_supported">Doesn\'t support work profiles</string>

    <!-- Sound settings screen, setting option title-->
    <string name="notification_sound_dialog_title">Default notification sound</string>
    <!-- Sound settings screen, setting option name -->
    <string name="media_volume_title">Media</string>
    <!-- Sound settings screen, setting option summary text -->
    <string name="media_volume_summary">Set volume for music and videos</string>
    <!-- Sound settings screen, alarm volume slider title -->
    <string name="alarm_volume_title">Alarm</string>
    <!-- Sound settings screen, dock settings summary-->
    <string name="dock_settings_summary">Audio settings for the attached dock</string>
    <!-- Sound settings screen, setting check box label -->
    <string name="dtmf_tone_enable_title">Dial pad touch tones</string>
    <!-- Sound settings screen, setting check box label -->
    <string name="sound_effects_enable_title">Tap sounds</string>
    <!-- Sound settings screen, setting check box label -->
    <string name="lock_sounds_enable_title">Screen lock sound</string>
    <!-- Sound settings screen, setting check box label -->
    <string name="haptic_feedback_enable_title">Vibrate on tap</string>
    <!-- Sound settings screen, setting option name checkbox to enable/disable audio recording features that improve audio recording in noisy environments -->
    <string name="audio_record_proc_title">Noise cancellation</string>
    <!-- Volume description for media volume -->
    <string name="volume_media_description">Music, video, games, &amp; other media</string>
    <!-- Volume description for ringtone and notification volume -->
    <string name="volume_ring_description">Ringtone &amp; notifications</string>
    <!-- Volume description for notification volume -->
    <string name="volume_notification_description">Notifications</string>
    <!-- Volume description for alarm volume -->
    <string name="volume_alarm_description">Alarms</string>
    <!-- Image description for ring volume mute button. -->
    <string name="volume_ring_mute">Mute ringtone &amp; notifications</string>
    <!-- Image description for media volume mute button. -->
    <string name="volume_media_mute">Mute music &amp; other media</string>
    <!-- Image description for notification volume mute button. -->
    <string name="volume_notification_mute">Mute notifications</string>
    <!-- Image description for alarm volume mute button. -->
    <string name="volume_alarm_mute">Mute alarms</string>

    <!-- Dock settings title, top level -->
    <string name="dock_settings">Dock</string>
    <!-- Dock settings title -->
    <string name="dock_settings_title">Dock settings</string>
    <!-- Dock audio settings -->
    <string name="dock_audio_settings_title">Audio</string>
    <!-- Dock audio summary for docked to desk dock -->
    <string name="dock_audio_summary_desk">Settings for the attached desktop dock</string>
    <!-- Dock audio summary for docked to car dock -->
    <string name="dock_audio_summary_car">Settings for the attached car dock</string>
    <!-- Dock audio summary for undocked -->
    <string name="dock_audio_summary_none" product="tablet">Tablet not docked</string>
    <!-- Dock audio summary for undocked -->
    <string name="dock_audio_summary_none" product="default">Phone not docked</string>
    <!-- Dock audio summary for docked to unknown -->
    <string name="dock_audio_summary_unknown">Settings for the attached dock</string>
    <!-- Dock not found dialog title -->
    <string name="dock_not_found_title">Dock not found</string>
    <!-- Dock not found dialog text -->
    <string name="dock_not_found_text" product="tablet">You need to dock the tablet before setting up dock audio.</string>
    <!-- Dock not found dialog text -->
    <string name="dock_not_found_text" product="default">You need to dock the phone before setting up dock audio.</string>
    <!-- Dock settings screen, dock events SFX setting check box label -->
    <string name="dock_sounds_enable_title">Dock insert sound</string>
    <!-- Dock settings screen, setting option summary text when check box is selected -->
    <string name="dock_sounds_enable_summary_on" product="tablet">Play sound when inserting or removing tablet from dock</string>
    <!-- Dock settings screen, setting option summary text when check box is selected -->
    <string name="dock_sounds_enable_summary_on" product="default">Play sound when inserting or removing phone from dock</string>
    <!-- Sound settings screen, setting option summary text when check box is clear -->
    <string name="dock_sounds_enable_summary_off" product="tablet">Don\u2019t play sound when inserting or removing tablet from dock</string>
    <!-- Sound settings screen, setting option summary text when check box is clear -->
    <string name="dock_sounds_enable_summary_off" product="default">Don\u2019t play sound when inserting or removing phone from dock</string>

    <!-- Account settings header. [CHAR LIMIT=30] -->
    <string name="account_settings">Accounts</string>
    <!-- Content description for work profile accounts group [CHAR LIMIT=NONE] -->
    <string name="accessibility_category_work">Work profile accounts - <xliff:g id="managed_by" example="Managed by Corporate application">%s</xliff:g></string>
    <!-- Content description for personal profile accounts group [CHAR LIMIT=NONE] -->
    <string name="accessibility_category_personal">Personal profile accounts</string>
    <!-- Content description for work profile details page title [CHAR LIMIT=NONE] -->
    <string name="accessibility_work_account_title">Work account - <xliff:g id="managed_by" example="Email provider">%s</xliff:g></string>
    <!-- Content description for personal profile details page title [CHAR LIMIT=NONE] -->
    <string name="accessibility_personal_account_title">Personal account - <xliff:g id="managed_by" example="Email provider">%s</xliff:g></string>

    <!-- Main Settings screen, setting option name to go into search settings -->
    <string name="search_settings">Search</string>
    <!-- Main Settings screen, setting option summary to go into search settings -->
    <string name="search_settings_summary">Manage search settings and history</string>
    <!-- There are no search results for the user's search [CHAR LIMIT=NONE]-->
    <string name="search_settings_no_results">No results</string>

    <!-- Button to clear all search history in Settings [CHAR LIMIT=40]-->
    <string name="search_clear_history">Clear history</string>

    <!-- Display settings --><skip/>
    <!-- Sound & display settings screen, section header for settings related to display -->
    <string name="display_settings">Display</string>
    <!-- Sound & display settings screen, accelerometer-based rotation check box label -->
    <string name="accelerometer_title">Auto-rotate screen</string>
    <!-- Display settings screen, Color mode settings title [CHAR LIMIT=30] -->
    <string name="color_mode_title">Colors</string>
    <!-- Display settings screen, Color mode option for "natural(sRGB) color"  [CHAR LIMIT=45] -->
    <string name="color_mode_option_natural">Natural</string>
    <!-- Display settings screen, Color mode option for "Boosted(sRGB + 10%) color"  [CHAR LIMIT=45] -->
    <string name="color_mode_option_boosted">Boosted</string>
    <!-- Display settings screen, Color mode option for "Saturated color"  [CHAR LIMIT=45] -->
    <string name="color_mode_option_saturated">Saturated</string>

    <!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is selected -->
    <string name="accelerometer_summary_on" product="tablet">Switch orientation automatically when rotating tablet</string>
    <!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is selected -->
    <string name="accelerometer_summary_on" product="default">Switch orientation automatically when rotating phone</string>
    <!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is clear -->
    <string name="accelerometer_summary_off" product="tablet">Switch orientation automatically when rotating tablet</string>
    <!-- Sound & display settings screen, accelerometer-based rotation summary text when check box is clear -->
    <string name="accelerometer_summary_off" product="default">Switch orientation automatically when rotating phone</string>
    <!-- Sound & display settings screen, setting option name to change brightness level -->
    <string name="brightness">Brightness level</string>
    <!-- Sound & display settings screen, setting option name to change brightness level [CHAR LIMIT=30] -->
    <string name="brightness_title">Brightness</string>
    <!-- Sound & display settings screen, setting option summary to change brightness level -->
    <string name="brightness_summary">Adjust the brightness of the screen</string>
    <!-- Sound & display settings screen, setting option name to enable adaptive brightness [CHAR LIMIT=30] -->
    <string name="auto_brightness_title">Adaptive brightness</string>
    <!-- Sound & display settings screen, setting option summary to enable adaptive brightness [CHAR LIMIT=100] -->
    <string name="auto_brightness_summary">Optimize brightness level for available light</string>
    <!-- Sound & display settings screen, setting option summary when adaptive brightness is off [CHAR LIMIT=100] -->
    <string name="auto_brightness_summary_off">Off</string>
    <!-- Sound & display settings screen, setting option summary when preferred adaptive brightness is very low [CHAR LIMIT=100] -->
    <string name="auto_brightness_summary_very_low">Preferred brightness is very low</string>
    <!-- Sound & display settings screen, setting option summary when preferred adaptive brightness is low [CHAR LIMIT=100] -->
    <string name="auto_brightness_summary_low">Preferred brightness is low</string>
    <!-- Sound & display settings screen, setting option summary when preferred adaptive brightness is the default [CHAR LIMIT=100] -->
    <string name="auto_brightness_summary_default">Preferred brightness is default</string>
    <!-- Sound & display settings screen, setting option summary when preferred adaptive brightness is high [CHAR LIMIT=100] -->
    <string name="auto_brightness_summary_high">Preferred brightness is high</string>
    <!-- Sound & display settings screen, setting option summary when preferred adaptive brightness is very high [CHAR LIMIT=100] -->
    <string name="auto_brightness_summary_very_high">Preferred brightness is very high</string>
    <!-- Adaptive brightness settings screen, setting option to disable adaptive brightness [CHAR LIMIT=100] -->
    <string name="auto_brightness_off_title">Off</string>
    <!-- Adaptive brightness settings screen, setting option to enable adaptive brightness when user prefers very low brightness [CHAR LIMIT=100] -->
    <string name="auto_brightness_very_low_title">Very low</string>
    <!-- Adaptive brightness settings screen, setting option to enable adaptive brightness when user prefers low brightness [CHAR LIMIT=100] -->
    <string name="auto_brightness_low_title">Low</string>
    <!-- Adaptive brightness settings screen, setting option to enable adaptive brightness when user prefers default brightness [CHAR LIMIT=100] -->
    <string name="auto_brightness_default_title">Default</string>
    <!-- Adaptive brightness settings screen, setting option to enable adaptive brightness when user prefers high brightness [CHAR LIMIT=100] -->
    <string name="auto_brightness_high_title">High</string>
    <!-- Adaptive brightness settings screen, setting option to enable adaptive brightness when user prefers very high brightness [CHAR LIMIT=100] -->
    <string name="auto_brightness_very_high_title">Very high</string>
    <!-- Adaptive brightness settings screen, subtitle [CHAR LIMIT=100] -->
    <string name="auto_brightness_subtitle">Your preferred brightness level</string>
    <!-- Adaptive brightness settings screen, setting option summary to disable adaptive brightness [CHAR LIMIT=100] -->
    <string name="auto_brightness_off_summary">Don\'t adjust for available light</string>
    <!-- Adaptive brightness settings screen, setting option summary to enable adaptive brightness when user prefers very high brightness.
         Meant to make it clear that preferring very high brightness uses more battery. [CHAR LIMIT=100] -->
    <string name="auto_brightness_very_high_summary">Increased battery usage</string>
    <!-- Adaptive brightness settings screen, disclaimer that explains in more detail about how adaptive brightness works [CHAR LIMIT=150] -->
    <string name="auto_brightness_disclaimer">Optimize brightness level for available light. When this feature is on, you can still adjust brightness temporarily.</string>

    <!-- Night display screen, setting option name to enable night display (renamed "Night Light" with title caps). [CHAR LIMIT=30] -->
    <string name="night_display_title">Night Light</string>
    <!-- Night display screen, description of night display feature (renamed "Night Light" with title caps). [CHAR LIMIT=NONE] -->
    <string name="night_display_text">Night Light tints your screen amber. This makes it easier to look at your screen or read in dim light, and may help you fall asleep more easily.</string>
    <!-- Night display screen, setting option name to configure whether night display turn on/off automatically. [CHAR LIMIT=30] -->
    <string name="night_display_auto_mode_title">Schedule</string>
    <!-- Night display screen, setting option value for night display to *never* turn on/off automatically. [CHAR LIMIT=30] -->
    <string name="night_display_auto_mode_never">None</string>
    <!-- Night display screen, setting option value for night display to turn on/off automatically according to a user defined schedule. [CHAR LIMIT=32] -->
    <string name="night_display_auto_mode_custom">Turns on at custom time</string>
    <!-- Night display screen, setting option value for night display to turn on/off automatically at sunset/sunrise. [CHAR LIMIT=32] -->
    <string name="night_display_auto_mode_twilight">Turns on from sunset to sunrise</string>
    <!-- Night display screen, setting option name to configure time to automatically turn on night display. [CHAR LIMIT=30] -->
    <string name="night_display_start_time_title">Start time</string>
    <!-- Night display screen, setting option name to configure time to automatically turn off night display. [CHAR LIMIT=30] -->
    <string name="night_display_end_time_title">End time</string>
    <!-- Night display screen, setting option name controlling the current activation status. [CHAR LIMIT=30] -->
    <string name="night_display_status_title">Status</string>
    <!-- Night display screen, setting the color temperature of the display. [CHAR LIMIT=30] -->
    <string name="night_display_temperature_title">Intensity</string>
    <!-- Display settings screen, summary format of night display when off. [CHAR LIMIT=NONE] -->
    <string name="night_display_summary_off">Off / <xliff:g name="auto_mode_summary" example="Never turn on automatically">%1$s</xliff:g></string>
    <!-- Display settings screen, summary of night display when off and will *never* turn on automatically. [CHAR LIMIT=NONE] -->
    <string name="night_display_summary_off_auto_mode_never">Will never turn on automatically</string>
    <!-- Display settings screen, summary format of night display when off and will turn on automatically at a user defined time. [CHAR LIMIT=NONE] -->
    <string name="night_display_summary_off_auto_mode_custom">Will turn on automatically at <xliff:g name="time" example="6 AM">%1$s</xliff:g></string>
    <!-- Display settings screen, summary of night display when off and will turn on automatically at sunset. [CHAR LIMIT=NONE] -->
    <string name="night_display_summary_off_auto_mode_twilight">Will turn on automatically at sunset</string>
    <!-- Display settings screen, summary format of night display when on. [CHAR LIMIT=NONE] -->
    <string name="night_display_summary_on">On / <xliff:g name="auto_mode_summary" example="Never turn off automatically">%1$s</xliff:g></string>
    <!-- Display settings screen, summary of night display when on and will *never* turn off automatically. [CHAR LIMIT=NONE] -->
    <string name="night_display_summary_on_auto_mode_never">Will never turn off automatically</string>
    <!-- Display settings screen, summary format of night display when on and will turn off automatically at a user defined time. [CHAR LIMIT=NONE] -->
    <string name="night_display_summary_on_auto_mode_custom">Will turn off automatically at <xliff:g name="time" example="10 PM">%1$s</xliff:g></string>
    <!-- Display settings screen, summary of night display when on and will turn off automatically at sunrise. [CHAR LIMIT=NONE] -->
    <string name="night_display_summary_on_auto_mode_twilight">Will turn off automatically at sunrise</string>

    <!-- Sound & display settings screen, setting option name to change screen timeout -->
    <string name="screen_timeout">Sleep</string>
    <!-- Sound & display settings screen, setting option name to change screen timeout [CHAR LIMIT=30] -->
    <string name="screen_timeout_title">Screen turns off</string>
    <!-- Sound & display settings screen, setting option summary to change screen timeout -->
    <string name="screen_timeout_summary">After <xliff:g id="timeout_description">%1$s</xliff:g> of inactivity</string>
    <!-- Wallpaper settings title [CHAR LIMIT=30] -->
    <string name="wallpaper_settings_title">Wallpaper</string>
    <!-- Wallpaper settings summary when default wallpaper is used [CHAR LIMIT=NONE] -->
    <string name="wallpaper_settings_summary_default">Default</string>
    <!-- Wallpaper settings summary when wallpaper has been updated [CHAR LIMIT=NONE] -->
    <string name="wallpaper_settings_summary_custom">Custom</string>
    <!-- Wallpaper suggestion title [CHAR LIMIT=30] -->
    <string name="wallpaper_suggestion_title">Change wallpaper</string>
    <!-- Wallpaper suggestion title [CHAR LIMIT=60] -->
    <string name="wallpaper_suggestion_summary">Personalize your screen</string>
    <!-- Wallpaper settings fragment title [CHAR LIMIT=30] -->
    <string name="wallpaper_settings_fragment_title">Choose wallpaper from</string>
    <!-- Display settings screen, trigger for screen saver options -->
    <string name="screensaver_settings_title">Screen saver</string>
    <!-- Display settings screen, summary fragment for screen saver options, activated when docked or asleep and charging -->