blob: 930e21e236c8fe3e6b7a18bd8bf1c311718dda1c [file] [log] [blame]
<?xml version="1.0" encoding="utf-8"?>
<!--
/*
**
** Copyright 2007 The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- Choices for timezone picker first level.
These values will be used as search terms for TimeZone displayName
strings. --> <skip />
<!-- The time zone picker screen has two levels. The first level allows the user to choose a region. -->
<string-array name="timezone_filters">
<!-- The next level of the time zoner picker should show time zones from the Americas. -->
<item>America</item>
<!-- The next level of the time zoner picker should show time zones from Europe. -->
<item>Europe</item>
<!-- The next level of the time zoner picker should show time zones from Africa. -->
<item>Africa</item>
<!-- The next level of the time zoner picker should show time zones from Asia. -->
<item>Asia</item>
<!-- The next level of the time zoner picker should show time zones from Australia. -->
<item>Australia</item>
<!-- The next level of the time zoner picker should show time zones from Pacific. -->
<item>Pacific</item>
<!-- The next level of the time zoner picker should show time zones from ALL regions. -->
<item>All</item>
</string-array>
<!-- Display settings. The delay in inactivity before the screen is turned off. These are shown in a list dialog. -->
<string-array name="screen_timeout_entries">
<item>15 seconds</item>
<item>30 seconds</item>
<item>1 minute</item>
<item>2 minutes</item>
<item>5 minutes</item>
<item>10 minutes</item>
<item>30 minutes</item>
</string-array>
<!-- Do not translate. -->
<string-array name="screen_timeout_values" translatable="false">
<!-- Do not translate. -->
<item>15000</item>
<!-- Do not translate. -->
<item>30000</item>
<!-- Do not translate. -->
<item>60000</item>
<!-- Do not translate. -->
<item>120000</item>
<!-- Do not translate. -->
<item>300000</item>
<!-- Do not translate. -->
<item>600000</item>
<!-- Do not translate. -->
<item>1800000</item>
</string-array>
<!-- Display settings. The delay in inactivity before the dream is shown. These are shown in a list dialog. -->
<string-array name="dream_timeout_entries">
<item>Never</item>
<item>15 seconds</item>
<item>30 seconds</item>
<item>1 minute</item>
<item>2 minutes</item>
<item>5 minutes</item>
<item>10 minutes</item>
<item>30 minutes</item>
</string-array>
<!-- Do not translate. -->
<string-array name="dream_timeout_values" translatable="false">
<!-- Do not translate. -->
<item>0</item>
<!-- Do not translate. -->
<item>15000</item>
<!-- Do not translate. -->
<item>30000</item>
<!-- Do not translate. -->
<item>60000</item>
<!-- Do not translate. -->
<item>120000</item>
<!-- Do not translate. -->
<item>300000</item>
<!-- Do not translate. -->
<item>600000</item>
<!-- Do not translate. -->
<item>1800000</item>
</string-array>
<!-- Security settings. The delay after screen is turned off until device locks.
These are shown in a list dialog. -->
<string-array name="lock_after_timeout_entries">
<item>Immediately</item>
<item>5 seconds</item>
<item>15 seconds</item>
<item>30 seconds</item>
<item>1 minute</item>
<item>2 minutes</item>
<item>5 minutes</item>
<item>10 minutes</item>
<item>30 minutes</item>
</string-array>
<!-- Do not translate. -->
<string-array name="lock_after_timeout_values" translatable="false">
<!-- Do not translate. -->
<item>0</item>
<!-- Do not translate. -->
<item>5000</item>
<!-- Do not translate. -->
<item>15000</item>
<!-- Do not translate. -->
<item>30000</item>
<!-- Do not translate. -->
<item>60000</item>
<!-- Do not translate. -->
<item>120000</item>
<!-- Do not translate. -->
<item>300000</item>
<!-- Do not translate. -->
<item>600000</item>
<!-- Do not translate. -->
<item>1800000</item>
</string-array>
<string-array name="entries_font_size">
<item msgid="6490061470416867723">Small</item>
<item msgid="3579015730662088893">Default</item>
<item msgid="1678068858001018666">Large</item>
<item msgid="490158884605093126">Largest</item>
</string-array>
<string-array name="entryvalues_font_size" translatable="false">
<item>0.85</item>
<item>1.0</item>
<item>1.15</item>
<item>1.30</item>
</string-array>
<!-- Wi-Fi settings -->
<!-- Match this with the order of NetworkInfo.DetailedState. --> <skip />
<!-- Wi-Fi settings. The status messages when the network is unknown. -->
<string-array name="wifi_status">
<!-- Status message of Wi-Fi when it is idle. -->
<item></item>
<!-- Status message of Wi-Fi when it is scanning. -->
<item>Scanning\u2026</item>
<!-- Status message of Wi-Fi when it is connecting. -->
<item>Connecting\u2026</item>
<!-- Status message of Wi-Fi when it is authenticating. -->
<item>Authenticating\u2026</item>
<!-- Status message of Wi-Fi when it is obtaining IP address. -->
<item>Obtaining IP address\u2026</item>
<!-- Status message of Wi-Fi when it is connected. -->
<item>Connected</item>
<!-- Status message of Wi-Fi when it is suspended. -->
<item>Suspended</item>
<!-- Status message of Wi-Fi when it is disconnecting. -->
<item>Disconnecting\u2026</item>
<!-- Status message of Wi-Fi when it is disconnected. -->
<item>Disconnected</item>
<!-- Status message of Wi-Fi when it is a failure. -->
<item>Unsuccessful</item>
<!-- Status message of Wi-Fi when it is blocked. -->
<item>Blocked</item>
<!-- Status message of Wi-Fi when connectiong is being verified. -->
<item>Temporarily avoiding poor connection</item>
</string-array>
<!-- Match this with the order of NetworkInfo.DetailedState. --> <skip />
<!-- Wi-Fi settings. The status messages when the network is known. -->
<string-array name="wifi_status_with_ssid">
<!-- Status message of Wi-Fi when it is idle. -->
<item></item>
<!-- Status message of Wi-Fi when it is scanning. -->
<item>Scanning\u2026</item>
<!-- Status message of Wi-Fi when it is connecting to a network. -->
<item>Connecting to <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
<!-- Status message of Wi-Fi when it is authenticating with a network. -->
<item>Authenticating with <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
<!-- Status message of Wi-Fi when it is obtaining IP address from a network. -->
<item>Obtaining IP address from <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
<!-- Status message of Wi-Fi when it is connected to a network. -->
<item>Connected to <xliff:g id="network_name">%1$s</xliff:g></item>
<!-- Status message of Wi-Fi when it is suspended. -->
<item>Suspended</item>
<!-- Status message of Wi-Fi when it is disconnecting from a network. -->
<item>Disconnecting from <xliff:g id="network_name">%1$s</xliff:g>\u2026</item>
<!-- Status message of Wi-Fi when it is disconnected. -->
<item>Disconnected</item>
<!-- Status message of Wi-Fi when it is a failure. -->
<item>Unsuccessful</item>
<!-- Status message of Wi-Fi when it is blocked. -->
<item>Blocked</item>
<!-- Status message of Wi-Fi when connectiong is being verified. -->
<item>Temporarily avoiding poor connection</item>
</string-array>
<!-- Match this with the constants in AccessPoint. --> <skip />
<!-- Wi-Fi security choices used when manually added a Wi-Fi network -->
<string-array name="wifi_security">
<!-- The Wi-Fi network does not have any security. -->
<item>@string/wifi_security_none</item>
<!-- Do not translate. -->
<item>@string/wifi_security_wep</item>
<!-- Do not translate. -->
<item>@string/wifi_security_psk_generic</item>
<!-- Do not translate. -->
<item>@string/wifi_security_eap</item>
</string-array>
<!-- Match this with the constants in AccessPoint. --> <skip />
<!-- Wi-Fi security types for New User Dialog. EAP is not configurable. -->
<string-array name="wifi_security_no_eap">
<!-- The Wi-Fi network does not have any security. -->
<item>@string/wifi_security_none</item>
<!-- Do not translate. -->
<item>@string/wifi_security_wep</item>
<!-- Do not translate. -->
<item>@string/wifi_security_psk_generic</item>
</string-array>
<!-- Security types for wireless tether -->
<string-array name="wifi_tether_security">
<!-- Do not translate. -->
<item>@string/wifi_security_wpa2</item>
<!-- Do not translate. -->
<item>@string/wifi_security_none</item>
</string-array>
<!-- Values for security type for wireless tether -->
<string-array name="wifi_tether_security_values">
<!-- Do not translate. -->
<item>4</item>
<!-- Do not translate. -->
<item>0</item>
</string-array>
<!-- Match this with the constants in WifiDialog. --> <skip />
<!-- Wi-Fi settings. The type of EAP method a Wi-Fi network has. -->
<string-array name="wifi_eap_method">
<!-- Do not translate. -->
<item>PEAP</item>
<!-- Do not translate. -->
<item>TLS</item>
<!-- Do not translate. -->
<item>TTLS</item>
<!-- Do not translate. -->
<item>PWD</item>
<!-- Do not translate. -->
<item>SIM</item>
<!-- Do not translate. -->
<item>AKA</item>
<!-- Do not translate. -->
<item>AKA\'</item>
</string-array>
<!-- Type of EAP method when EAP SIM, AKA, AKA' are not supported -->
<string-array name="eap_method_without_sim_auth">
<!-- Do not translate. -->
<item>PEAP</item>
<!-- Do not translate. -->
<item>TLS</item>
<!-- Do not translate. -->
<item>TTLS</item>
<!-- Do not translate. -->
<item>PWD</item>
</string-array>
<!-- Wi-Fi AP band settings. Either Auto, 2.4GHz or 5GHz. -->
<!-- Note that adding/removing/moving the items will need wifi settings code change. -->
<string-array translatable="false" name="wifi_ap_band_config_full">
<item>0</item>
<item>1</item>
</string-array>
<string-array translatable="false" name="wifi_ap_band_summary_full">
<item>@string/wifi_ap_choose_2G</item>
<item>@string/wifi_ap_choose_5G</item>
</string-array>
<string-array translatable="false" name="wifi_ap_band_dual_mode">
<item>0</item>
<item>-1</item>
</string-array>
<string-array translatable="false" name="wifi_ap_band_dual_mode_summary">
<item>@string/wifi_ap_choose_2G</item>
<item>@string/wifi_ap_prefer_5G</item>
</string-array>
<string-array translatable="false" name="wifi_ap_band_config_2G_only">
<item>@string/wifi_ap_choose_auto</item>
<item>@string/wifi_ap_choose_2G</item>
</string-array>
<!-- Wi-Fi WPS setup for p2p connections. -->
<!-- Note that adding/removing/moving the items will need wifi settings code change. -->
<string-array name="wifi_p2p_wps_setup">
<!-- Push button based configuration involves pushing a button on two connecting devices [CHAR LIMIT=30]-->
<item>Push button</item>
<!-- This involves entering a pin obtained from a peer device [CHAR LIMIT=30] -->
<item>PIN from peer device</item>
<!-- This involves generating a pin from this device [CHAR LIMIT=20] -->
<item>PIN from this device</item>
</string-array>
<!-- Match this with the order of WifiP2pDevice.Status -->
<!-- Wi-Fi p2p settings device status message -->
<string-array name="wifi_p2p_status">
<item>Connected</item>
<item>Invited</item>
<item>Unsuccessful</item>
<item>Available</item>
<item>Out-of-range</item>
</string-array>
<!-- Bluetooth Settings -->
<!-- Discoverable mode timeout options -->
<string-array name="bluetooth_visibility_timeout_entries">
<item>2 minutes</item>
<item>5 minutes</item>
<item>1 hour</item>
<item>Never time out</item>
</string-array>
<!-- Bluetooth developer settings: Titles for maximum number of connected audio devices -->
<string-array name="bluetooth_max_connected_audio_devices">
<item>Use System Default: <xliff:g id="default_bluetooth_max_connected_audio_devices">%1$d</xliff:g></item>
<item>1</item>
<item>2</item>
<item>3</item>
<item>4</item>
<item>5</item>
</string-array>
<!-- Bluetooth developer settings: Values for maximum number of connected audio devices -->
<string-array translatable="false" name="bluetooth_max_connected_audio_devices_values">
<item></item>
<item>1</item>
<item>2</item>
<item>3</item>
<item>4</item>
<item>5</item>
</string-array>
<!-- Match this with drawable.wifi_signal. --> <skip />
<!-- Wi-Fi settings. The signal strength a Wi-Fi network has. -->
<string-array name="wifi_signal">
<item>Poor</item>
<item>Poor</item>
<item>Fair</item>
<item>Good</item>
<item>Excellent</item>
</string-array>
<!-- Data Usage settings. Range of data usage. -->
<string-array name="data_usage_data_range">
<!-- Last 30 days [CHAR LIMIT=25]-->
<item>Last 30 days</item>
<!-- Set usage cycle [CHAR LIMIT=25]-->
<item>Set usage cycle...</item>
</string-array>
<!-- Display options for UsageStats class -->
<string-array name="usage_stats_display_order_types">
<item>Usage time</item>
<item>Last time used</item>
<item>App name</item>
</string-array>
<!-- EAP method -->
<string-array name="wifi_eap_entries">
<item>PEAP</item>
<item>TLS</item>
<item>TTLS</item>
<item>PWD</item>
</string-array>
<!-- Phase 2 options for PEAP -->
<string-array name="wifi_peap_phase2_entries">
<item>None</item>
<item>MSCHAPV2</item>
<item>GTC</item>
</string-array>
<!-- Type of EAP method when EAP SIM, AKA, AKA' are supported -->
<string-array name="wifi_peap_phase2_entries_with_sim_auth">
<item>None</item>
<!-- Do not translate. -->
<item>MSCHAPV2</item>
<!-- Do not translate. -->
<item>GTC</item>
<!-- Do not translate. -->
<item>SIM</item>
<!-- Do not translate. -->
<item>AKA</item>
<!-- Do not translate. -->
<item>AKA\'</item>
</string-array>
<!-- Phase 2 options for rest of EAP methods -->
<string-array name="wifi_phase2_entries">
<item>None</item>
<item>PAP</item>
<item>MSCHAP</item>
<item>MSCHAPV2</item>
<item>GTC</item>
</string-array>
<!-- Wi-Fi IP settings. -->
<!-- Note that adding/removing/moving the items will need wifi settings code change. -->
<string-array name="wifi_ip_settings">
<!-- Use DHCP (Dynamic Host Configuration Protocol) for obtaining IP settings [CHAR LIMIT=25] -->
<item>DHCP</item>
<!-- Use statically defined IP settings [CHAR LIMIT=25]-->
<item>Static</item>
</string-array>
<!-- Wi-Fi proxy settings. -->
<!-- Note that adding/removing/moving the items will need wifi settings code change. -->
<string-array name="wifi_proxy_settings">
<!-- No HTTP proxy is used for the current wifi network [CHAR LIMIT=25] -->
<item>None</item>
<!-- Manual HTTP proxy settings are used for the current wifi network [CHAR LIMIT=25] -->
<item>Manual</item>
<!-- Proxy Auto-Config URL that is used for the current wifi network [CHAR LIMIT=25] -->
<item>Proxy Auto-Config</item>
</string-array>
<!-- Authentication Types used in APN editor -->
<string-array name="apn_auth_entries">
<item>None</item>
<item>PAP</item>
<item>CHAP</item>
<item>PAP or CHAP</item>
</string-array>
<string-array translatable="false" name="apn_auth_values">
<!-- Do not translate. -->
<item>0</item>
<!-- Do not translate. -->
<item>1</item>
<!-- Do not translate. -->
<item>2</item>
<!-- Do not translate. -->
<item>3</item>
</string-array>
<!-- Authentication Types used in APN editor -->
<string-array name="apn_protocol_entries">
<item>IPv4</item>
<item>IPv6</item>
<item>IPv4/IPv6</item>
</string-array>
<string-array translatable="false" name="apn_protocol_values">
<!-- Do not translate. -->
<item>IP</item>
<!-- Do not translate. -->
<item>IPV6</item>
<!-- Do not translate. -->
<item>IPV4V6</item>
</string-array>
<!-- Bearer Info used in APN editor -->
<string-array name="bearer_entries">
<item>Unspecified</item>
<item>LTE</item>
<item>HSPAP</item>
<item>HSPA</item>
<item>HSUPA</item>
<item>HSDPA</item>
<item>UMTS</item>
<item>EDGE</item>
<item>GPRS</item>
<item>eHRPD</item>
<item>EVDO_B</item>
<item>EVDO_A</item>
<item>EVDO_0</item>
<item>1xRTT</item>
<item>IS95B</item>
<item>IS95A</item>
</string-array>
<string-array translatable="false" name="bearer_values">
<!-- Do not translate. -->
<item>0</item>
<!-- Do not translate. -->
<item>14</item>
<!-- Do not translate. -->
<item>15</item>
<!-- Do not translate. -->
<item>11</item>
<!-- Do not translate. -->
<item>10</item>
<!-- Do not translate. -->
<item>9</item>
<!-- Do not translate. -->
<item>3</item>
<!-- Do not translate. -->
<item>2</item>
<!-- Do not translate. -->
<item>1</item>
<!-- Do not translate. -->
<item>13</item>
<!-- Do not translate. -->
<item>12</item>
<!-- Do not translate. -->
<item>8</item>
<!-- Do not translate. -->
<item>7</item>
<!-- Do not translate. -->
<item>6</item>
<!-- Do not translate. -->
<item>5</item>
<!-- Do not translate. -->
<item>4</item>
</string-array>
<!-- MVNO Info used in APN editor -->
<string-array name="mvno_type_entries">
<item>None</item>
<!-- Do not translate. -->
<item>SPN</item>
<!-- Do not translate. -->
<item>IMSI</item>
<!-- Do not translate. -->
<item>GID</item>
</string-array>
<string-array translatable="false" name="mvno_type_values">
<!-- Do not translate. -->
<item></item>
<!-- Do not translate. -->
<item>spn</item>
<!-- Do not translate. -->
<item>imsi</item>
<!-- Do not translate. -->
<item>gid</item>
</string-array>
<!-- Apps on SD installation location options in ApplicationSettings -->
<string-array name="app_install_location_entries">
<item>Internal device storage</item>
<item>Removable SD card</item>
<item>Let the system decide</item>
</string-array>
<!-- Do not translate. -->
<string-array name="app_install_location_values" translatable="false">
<item>device</item>
<item>sdcard</item>
<item>auto</item>
</string-array>
<!-- Names of categories of app ops tabs -->
<string-array name="app_ops_categories">
<item>Location</item>
<item>Personal</item>
<item>Messaging</item>
<item>Media</item>
<item>Device</item>
</string-array>
<!-- User display names for app ops codes -->
<string-array name="app_ops_summaries">
<item>coarse location</item>
<item>fine location</item>
<item>GPS</item>
<item>vibrate</item>
<item>read contacts</item>
<item>modify contacts</item>
<item>read call log</item>
<item>modify call log</item>
<item>read calendar</item>
<item>modify calendar</item>
<item>wi-fi scan</item>
<item>notification</item>
<item>cell scan</item>
<item>call phone</item>
<item>read SMS</item>
<item>write SMS</item>
<item>receive SMS</item>
<item>receive emergency SMS</item>
<item>receive MMS</item>
<item>receive WAP push</item>
<item>send SMS</item>
<item>read ICC SMS</item>
<item>write ICC SMS</item>
<item>modify settings</item>
<item>draw on top</item>
<item>access notifications</item>
<item>camera</item>
<item>record audio</item>
<item>play audio</item>
<item>read clipboard</item>
<item>modify clipboard</item>
<item>media buttons</item>
<item>audio focus</item>
<item>master volume</item>
<item>voice volume</item>
<item>ring volume</item>
<item>media volume</item>
<item>alarm volume</item>
<item>notification volume</item>
<item>bluetooth volume</item>
<item>keep awake</item>
<item>monitor location</item>
<item>monitor high power location</item>
<item>get usage stats</item>
<item>mute/unmute microphone</item>
<item>show toast</item>
<item>project media</item>
<item>activate VPN</item>
<item>write wallpaper</item>
<item>assist structure</item>
<item>assist screenshot</item>
<item>read phone state</item>
<item>add voicemail</item>
<item>use sip</item>
<item>process outgoing call</item>
<item>fingerprint</item>
<item>body sensors</item>
<item>read cell broadcasts</item>
<item>mock location</item>
<item>read storage</item>
<item>write storage</item>
<item>turn on screen</item>
<item>get accounts</item>
<item>run in background</item>
<item>accessibility volume</item>
</string-array>
<!-- User display names for app ops codes -->
<string-array name="app_ops_labels">
<item>Location</item>
<item>Location</item>
<item>Location</item>
<item>Vibrate</item>
<item>Read contacts</item>
<item>Modify contacts</item>
<item>Read call log</item>
<item>Modify call log</item>
<item>Read calendar</item>
<item>Modify calendar</item>
<item>Location</item>
<item>Post notification</item>
<item>Location</item>
<item>Call phone</item>
<item>Read SMS/MMS</item>
<item>Write SMS/MMS</item>
<item>Receive SMS/MMS</item>
<item>Receive SMS/MMS</item>
<item>Receive SMS/MMS</item>
<item>Receive SMS/MMS</item>
<item>Send SMS/MMS</item>
<item>Read SMS/MMS</item>
<item>Write SMS/MMS</item>
<item>Modify settings</item>
<item>Draw on top</item>
<item>Access notifications</item>
<item>Camera</item>
<item>Record audio</item>
<item>Play audio</item>
<item>Read clipboard</item>
<item>Modify clipboard</item>
<item>Media buttons</item>
<item>Audio focus</item>
<item>Master volume</item>
<item>Voice volume</item>
<item>Ring volume</item>
<item>Media volume</item>
<item>Alarm volume</item>
<item>Notification volume</item>
<item>Bluetooth volume</item>
<item>Keep awake</item>
<item>Location</item>
<item>Location</item>
<item>Get usage stats</item>
<item>Mute/unmute microphone</item>
<item>Show toast</item>
<item>Project media</item>
<item>Activate VPN</item>
<item>Write wallpaper</item>
<item>Assist structure</item>
<item>Assist screenshot</item>
<item>Read phone state</item>
<item>Add voicemail</item>
<item>Use sip</item>
<item>Process outgoing call</item>
<item>Fingerprint</item>
<item>Body sensors</item>
<item>Read cell broadcasts</item>
<item>Mock location</item>
<item>Read storage</item>
<item>Write storage</item>
<item>Turn on screen</item>
<item>Get accounts</item>
<item>Run in background</item>
<item>Accessibility volume</item>
</string-array>
<!-- Titles for the list of long press timeout options. -->
<string-array name="long_press_timeout_selector_titles">
<!-- A title for the option for short long-press timeout [CHAR LIMIT=25] -->
<item>Short</item>
<!-- A title for the option for medium long-press timeout [CHAR LIMIT=25] -->
<item>Medium</item>
<!-- A title for the option for long long-press timeout [CHAR LIMIT=25] -->
<item>Long</item>
</string-array>
<!-- Values for the list of long press timeout options. -->
<string-array name="long_press_timeout_selector_values" translatable="false">
<item>400</item>
<item>1000</item>
<item>1500</item>
</string-array>
<!-- Titles for captioning typeface preference. [CHAR LIMIT=35] -->
<string-array name="captioning_typeface_selector_titles">
<item>Default</item>
<item>Sans-serif</item>
<item>Sans-serif condensed</item>
<item>Sans-serif monospace</item>
<item>Serif</item>
<item>Serif monospace</item>
<item>Casual</item>
<item>Cursive</item>
<item>Small capitals</item>
</string-array>
<!-- Values for captioning typeface preference. -->
<string-array name="captioning_typeface_selector_values" translatable="false" >
<item></item>
<item>sans-serif</item>
<item>sans-serif-condensed</item>
<item>sans-serif-monospace</item>
<item>serif</item>
<item>serif-monospace</item>
<item>casual</item>
<item>cursive</item>
<item>sans-serif-smallcaps</item>
</string-array>
<!-- Titles for captioning font size preference. [CHAR LIMIT=35] -->
<string-array name="captioning_font_size_selector_titles">
<item>Very small</item>
<item>Small</item>
<item>Normal</item>
<item>Large</item>
<item>Very large</item>
</string-array>
<!-- Values for captioning font size preference. -->
<string-array name="captioning_font_size_selector_values" translatable="false" >
<item>0.25</item>
<item>0.5</item>
<item>1.0</item>
<item>1.5</item>
<item>2.0</item>
</string-array>
<!-- Titles for captioning character edge type preference. [CHAR LIMIT=35] -->
<string-array name="captioning_edge_type_selector_titles">
<item>Default</item>
<item>None</item>
<item>Outline</item>
<item>Drop shadow</item>
<item>Raised</item>
<item>Depressed</item>
</string-array>
<!-- Values for captioning character edge type preference. -->
<integer-array name="captioning_edge_type_selector_values" translatable="false" >
<item>-1</item>
<item>0</item>
<item>1</item>
<item>2</item>
<item>3</item>
<item>4</item>
</integer-array>
<!-- Titles for captioning color preference. -->
<string-array name="captioning_color_selector_titles" translatable="false" >
<item>@string/color_unspecified</item>
<item>@string/color_white</item>
<item>@string/color_black</item>
<item>@string/color_red</item>
<item>@string/color_yellow</item>
<item>@string/color_green</item>
<item>@string/color_cyan</item>
<item>@string/color_blue</item>
<item>@string/color_magenta</item>
</string-array>
<!-- Values for captioning color preference. -->
<integer-array name="captioning_color_selector_values" translatable="false" >
<item>0x00FFFFFF</item>
<item>0xFFFFFFFF</item>
<item>0xFF000000</item>
<item>0xFFFF0000</item>
<item>0xFFFFFF00</item>
<item>0xFF00FF00</item>
<item>0xFF00FFFF</item>
<item>0xFF0000FF</item>
<item>0xFFFF00FF</item>
<item>0xFF000055</item>
<item>0xFF0000AA</item>
<item>0xFF005500</item>
<item>0xFF005555</item>
<item>0xFF0055AA</item>
<item>0xFF0055FF</item>
<item>0xFF00AA00</item>
<item>0xFF00AA55</item>
<item>0xFF00AAAA</item>
<item>0xFF00AAFF</item>
<item>0xFF00FF55</item>
<item>0xFF00FFAA</item>
<item>0xFF550000</item>
<item>0xFF550055</item>
<item>0xFF5500AA</item>
<item>0xFF5500FF</item>
<item>0xFF555500</item>
<item>0xFF555555</item>
<item>0xFF5555AA</item>
<item>0xFF5555FF</item>
<item>0xFF55AA00</item>
<item>0xFF55AA55</item>
<item>0xFF55AAAA</item>
<item>0xFF55AAFF</item>
<item>0xFF55FF00</item>
<item>0xFF55FF55</item>
<item>0xFF55FFAA</item>
<item>0xFF55FFFF</item>
<item>0xFFAA0000</item>
<item>0xFFAA0055</item>
<item>0xFFAA00AA</item>
<item>0xFFAA00FF</item>
<item>0xFFAA5500</item>
<item>0xFFAA5555</item>
<item>0xFFAA55AA</item>
<item>0xFFAA55FF</item>
<item>0xFFAAAA00</item>
<item>0xFFAAAA55</item>
<item>0xFFAAAAAA</item>
<item>0xFFAAAAFF</item>
<item>0xFFAAFF00</item>
<item>0xFFAAFF55</item>
<item>0xFFAAFFAA</item>
<item>0xFFAAFFFF</item>
<item>0xFFFF0055</item>
<item>0xFFFF00AA</item>
<item>0xFFFF5500</item>
<item>0xFFFF5555</item>
<item>0xFFFF55AA</item>
<item>0xFFFF55FF</item>
<item>0xFFFFAA00</item>
<item>0xFFFFAA55</item>
<item>0xFFFFAAAA</item>
<item>0xFFFFAAFF</item>
<item>0xFFFFFF55</item>
<item>0xFFFFFFAA</item>
</integer-array>
<!-- Titles for captioning opacity preference. [CHAR LIMIT=35] -->
<string-array name="captioning_opacity_selector_titles" >
<item>25%</item>
<item>50%</item>
<item>75%</item>
<item>100%</item>
</string-array>
<!-- Values for captioning opacity preference. -->
<integer-array name="captioning_opacity_selector_values" translatable="false" >
<item>0x40FFFFFF</item>
<item>0x80FFFFFF</item>
<item>0xC0FFFFFF</item>
<item>0xFFFFFFFF</item>
</integer-array>
<!-- Titles for captioning text style preset preference. [CHAR LIMIT=35] -->
<string-array name="captioning_preset_selector_titles" >
<item>Use app defaults</item>
<item>White on black</item>
<item>Black on white</item>
<item>Yellow on black</item>
<item>Yellow on blue</item>
<item>Custom</item>
</string-array>
<!-- Values for captioning text style preset preference. -->
<integer-array name="captioning_preset_selector_values" translatable="false" >
<item>4</item>
<item>0</item>
<item>1</item>
<item>2</item>
<item>3</item>
<item>-1</item>
</integer-array>
<!-- Match this with the constants in VpnProfile. --> <skip />
<!-- Short names for each VPN type, not really translatable. [CHAR LIMIT=20] -->
<string-array name="vpn_types" translatable="false">
<item>PPTP</item>
<item>L2TP/IPSec PSK</item>
<item>L2TP/IPSec RSA</item>
<item>IPSec Xauth PSK</item>
<item>IPSec Xauth RSA</item>
<item>IPSec Hybrid RSA</item>
</string-array>
<!-- Match this with the constants in VpnProfile. --> <skip />
<!-- Longer descriptions for each VPN type. [CHAR LIMIT=100] -->
<string-array name="vpn_types_long">
<item>PPTP VPN</item>
<item>L2TP/IPSec VPN with pre-shared keys</item>
<item>L2TP/IPSec VPN with certificates</item>
<item>IPSec VPN with pre-shared keys and Xauth authentication</item>
<item>IPSec VPN with certificates and Xauth authentication</item>
<item>IPSec VPN with certificates and hybrid authentication</item>
</string-array>
<!-- VPN proxy settings. -->
<string-array name="vpn_proxy_settings">
<!-- No HTTP proxy is used for the current VPN [CHAR LIMIT=25] -->
<item>None</item>
<!-- Manual HTTP proxy settings are used for the current VPN [CHAR LIMIT=25] -->
<item>Manual</item>
</string-array>
<!-- Match this with the constants in LegacyVpnInfo. --> <skip />
<!-- Status for a VPN network. [CHAR LIMIT=100] -->
<string-array name="vpn_states">
<!-- Status message when VPN is disconnected. -->
<item>Disconnected</item>
<!-- Status message when VPN is initializing. -->
<item>Initializing\u2026</item>
<!-- Status message when VPN is connecting. -->
<item>Connecting\u2026</item>
<!-- Status message when VPN is connected. -->
<item>Connected</item>
<!-- Status message when VPN is timeout. -->
<item>Timeout</item>
<!-- Status message when VPN is failed. -->
<item>Unsuccessful</item>
</string-array>
<!-- User content ratings for restricted users [CHAR LIMIT=30] -->
<string-array name="user_content_ratings_entries" translatable="false">
<item>Ascended being</item>
<item>Human</item>
<item>Neanderthal</item>
<item>Chimp</item>
<item>Monkey</item>
</string-array>
<!-- Values for user content ratings for restricted users -->
<string-array name="user_content_ratings_values" translatable="false">
<item>5</item>
<item>4</item>
<item>3</item>
<item>2</item>
<item>1</item>
</string-array>
<!-- Values for premium SMS permission selector [CHAR LIMIT=30] -->
<string-array name="security_settings_premium_sms_values">
<!-- Ask user before sending to premium SMS short code. -->
<item>Ask</item>
<!-- Never allow app to send to premium SMS short code. -->
<item>Never allow</item>
<!-- Always allow app to send to premium SMS short code. -->
<item>Always allow</item>
</string-array>
<!-- [CHAR LIMIT=40] Labels for memory states -->
<string-array name="ram_states">
<!-- Normal desired memory state. -->
<item>Normal</item>
<!-- Moderate memory state, not as good as normal. -->
<item>Moderate</item>
<!-- Memory is running low. -->
<item>Low</item>
<!-- Memory is critical. -->
<item>Critical</item>
<!-- Unknown memory state -->
<item>\?</item>
</string-array>
<!-- Display color space adjustment modes for accessibility -->
<string-array name="daltonizer_type_entries" translatable="false">
<item>@string/daltonizer_mode_deuteranomaly</item>
<item>@string/daltonizer_mode_protanomaly</item>
<item>@string/daltonizer_mode_tritanomaly</item>
</string-array>
<!-- Values for display color space adjustment modes for accessibility -->
<string-array name="daltonizer_type_values" translatable="false">
<item>12</item>
<item>11</item>
<item>13</item>
</string-array>
<!-- Battery saver mode: allowable trigger threshold levels. -->
<integer-array name="battery_saver_trigger_values" translatable="false" >
<item>0</item>
<item>5</item>
<item>15</item>
<item>50</item>
<item>100</item>
</integer-array>
<!-- Process stats memory use details: labels for memory states -->
<string-array name="proc_stats_memory_states" >
<item>Normal</item>
<item>Moderate</item>
<item>Low</item>
<item>Critical</item>
</string-array>
<!-- Process stats memory use details: labels for process -->
<string-array name="proc_stats_process_states" >
<item>Persistent</item>
<item>Top activity</item>
<item>Important (foreground)</item>
<item>Important (background)</item>
<item>Backup</item>
<item>Heavy weight</item>
<item>Service (running)</item>
<item>Service (restarting)</item>
<item>Receiver</item>
<item>Home</item>
<item>Last activity</item>
<item>Cached (activity)</item>
<item>Cached (activity client)</item>
<item>Cached (empty)</item>
</string-array>
<!-- Array of titles for sim color for multi-sim -->
<string-array name="color_picker">
<item>Teal</item>
<item>Blue</item>
<item>Indigo</item>
<item>Purple</item>
<item>Pink</item>
<item>Red</item>
</string-array>
<!-- Automatic storage management settings. The amount of days for the automatic storage manager
to retain. These are shown in a list dialog. [CHAR LIMIT=70] -->
<string-array name="automatic_storage_management_days">
<item>Over 30 days old</item>
<item>Over 60 days old</item>
<item>Over 90 days old</item>
</string-array>
<string-array name="automatic_storage_management_days_values" translatable="false">
<item>30</item>
<item>60</item>
<item>90</item>
</string-array>
<string-array name="when_to_start_screensaver_entries" translatable="false">
<item>@string/screensaver_settings_summary_sleep</item>
<item>@string/screensaver_settings_summary_dock</item>
<item>@string/screensaver_settings_summary_either_long</item>
<item>@string/screensaver_settings_summary_never</item>
</string-array>
<string-array name="when_to_start_screensaver_values" translatable="false">
<item>while_charging_only</item>
<item>while_docked_only</item>
<item>either_charging_or_docked</item>
<item>never</item>
</string-array>
<string-array name="zen_mode_contacts_entries" translatable="false">
<item>@string/zen_mode_from_anyone</item>
<item>@string/zen_mode_from_contacts</item>
<item>@string/zen_mode_from_starred</item>
<item>@string/zen_mode_from_none</item>
</string-array>
<string-array name="zen_mode_contacts_values" translatable="false">
<item>zen_mode_from_anyone</item>
<item>zen_mode_from_contacts</item>
<item>zen_mode_from_starred</item>
<item>zen_mode_from_none</item>
</string-array>
<string-array name="wifi_metered_entries">
<item>Detect automatically</item>
<item>Treat as metered</item>
<item>Treat as unmetered</item>
</string-array>
<string-array name="wifi_hidden_entries">
<item>No</item>
<item>Yes</item>
</string-array>
<string-array name="wifi_metered_values" translatable="false">
<item>0</item>
<item>1</item>
<item>2</item>
</string-array>
<!-- Titles for ui dark mode preference. -->
<string-array name="dark_ui_mode_entries" >
<item>Automatic (based on time of day)</item>
<item>Always on</item>
<item>Always off</item>
</string-array>
<!-- Values for ui dark mode preference. -->
<string-array name="dark_ui_mode_values" translatable="false" >
<item>auto</item>
<item>yes</item>
<item>no</item>
</string-array>
<!-- Titles for SystemUI theme preference. -->
<string-array name="systemui_theme_entries" >
<item>@string/systemui_theme_wallpaper</item>
<item>@string/systemui_theme_light</item>
<item>@string/systemui_theme_dark</item>
</string-array>
<!-- Values for SystemUI theme preference. -->
<string-array name="systemui_theme_values" translatable="false" >
<item>0</item>
<item>1</item>
<item>2</item>
</string-array>
<string-array name="gesture_prevent_ringing_entries" translatable="false">
<item>@string/prevent_ringing_option_vibrate</item>
<item>@string/prevent_ringing_option_mute</item>
<item>@string/prevent_ringing_option_none</item>
</string-array>
<!-- Keep in sync with Settings.Secure.VOLUME_HUSH_* -->
<string-array name="gesture_prevent_ringing_values" translatable="false">
<item>1</item>
<item>2</item>
<item>0</item>
</string-array>
<!-- WiFi calling mode array -->
<string-array name="wifi_calling_mode_summaries" translatable="false">
<item>@string/wifi_calling_mode_wifi_preferred_summary</item>
<item>@string/wifi_calling_mode_cellular_preferred_summary</item>
<item>@string/wifi_calling_mode_wifi_only_summary</item>
</string-array>
<!-- WiFi calling mode array without wifi only mode -->
<string-array name="wifi_calling_mode_summaries_without_wifi_only" translatable="false">
<item>@string/wifi_calling_mode_wifi_preferred_summary</item>
<item>@string/wifi_calling_mode_cellular_preferred_summary</item>
</string-array>
</resources>