Build System Maintainers Guide

The latest version of this document is available at Ensure that you are using the version that corresponds to your NDK. Replace master in the URL with the appropriate NDK release branch. For example, the NDK r19 version of this document is located at

The purpose of this guide is to instruct third-party build system maintainers in adding NDK support to their build systems. This guide will not be useful to most NDK users. NDK users should start with Building Your Project.

Note: This guide is written assuming Linux is the host OS. Mac should be no different, and the only difference on Windows is that file extensions for executables and scripts will differ.


The NDK uses the LLVM family of tools for building C/C++ code. These include Clang for compilation, LLD for linking, and other LLVM tools for other tasks. Historically Binutils was used and remains available during the transition but is deprecated and will soon be removed from the NDK.


Note: In general an architecture may have multiple ABIs. An ABI (application binary interface) is different from an architecture in that it also specifies a calling convention, size and alignment of types, and other implementation details. For Android, each architecture supports only one ABI.

Android supports multiple architectures: ARM32, ARM64, x86, and x86_64. NDK applications must build libraries for every architecture they support. 64-bit devices usually also support the 32-bit variant of their architecture, but this may not always be the case. While in general this means that an app with only 32-bit libraries can run on 64-bit capable devices, the 64-bit ABI will have improved performance.

This document will make use of <arch>, <ABI>, and <triple> in describing paths and arguments. The values of these variables for each architecture are as follows except where otherwise noted:

32-bit ARMv7armarmeabi-v7aarm-linux-androideabi
64-bit ARMv8aarch64aarch64-v8aaarch64-linux-android
32-bit Intelx86x86i686-linux-android
64-bit Intelx86_64x86_64x86_64-linux-android

Note: Strictly speaking ARMv7 with NEON is a different ABI from ARMv7 without NEON, but it is not a system ABI. Both NEON and non-NEON ARMv7 code uses the ARMv7 system and toolchains.

To programatically determine the list of supported ABIs, their bitness, as well as their deprecation status and whether or not it is recommended to build them by default, use <NDK>/meta/abis.json.


32-bit ARM can be built using either the Thumb or ARM instruction sets. Thumb code is smaller but may perform worse than ARM. However, smaller code makes more effective use of a processor‘s instruction cache, so benchmarking is necessary to determine which is more effective for a given application. ndk-build and the NDK’s CMake toolchain file generate Thumb code by default.

The ARM or Thumb instruction sets are selected by passing -marm or -mthumb to Clang respectively. By default, Clang will generate ARM code as opposed to Thumb for the armv7a-linux-androideabi target.

Note: For ARMv7, Thumb-2 is used. Android no longer supports ARMv5, but if your build system mistakenly targets ARMv5 the less efficient Thumb-1 will be used.


Most ARM Android devices support NEON. This is supported by all 64-bit ARM devices and nearly all 32-bit ARM devices running at least Android Marshmallow (API 23). The Android CDD has required NEON support since that version, but it is possible that extant devices that were upgraded to Marshmallow do not include NEON support.

NEON can significantly improve application performance.

Clang automatically enables NEON for all API levels. ARM devices without NEON are uncommon. To support non-NEON devices, pass -mfpu=vfpv3-d16 when compiling. Alternatively, use the Play Console to exclude CPUs without NEON to disallow your app from being installed on those devices.

OS Versions

As users are distributed over a wide variety of Android OS versions (see the Distribution dashboard), applications have a minimum and maximum supported version, as well as a targeted version. These are minSdkVersion, maxSdkVersion, and targetSdkVersion respectively. See the uses-sdk documentation for more information.

For NDK code, the only relevant value is the minimum supported version. Any time this doc refers to an API level, OS version, or target version, it is referring to the application's minSdkVersion.

The API level targeted by an NDK application determines which APIs will be exposed for use by the application. APIs that are not present in the targeted API level cannot be linked directly, but may be accessed via dlsym. An NDK application running on a device with an API level lower than the target will often not load at all. If it does load, it may not behave as expected. This is not a supported configuration.

The major/minor version number given to an Android OS has no meaning when it comes to determining its API level. See the table in the Build numbers document to map Android code names and version numbers to API levels.

Note: Not every API level includes new NDK APIs. If there were no new NDK APIs for the given API level, there is no library directory for that API level. In that case, the build system should select the closest available API that is below the target API level. For example, applications with a minSdkVersion of 20 should use API 19 for their NDK target.

To programatically determine the list of supported API levels as well as aliases that are accepted by ndk-build and CMake, see <NDK>/meta/platforms.json.

Note: In some contexts the API level may be referred to as a platform. In this document an API level is always an integer, and a platform takes the form of android-<API level>. The latter format is not specifically used anywhere in the NDK toolchain, but is used to specify target API levels for ndk-build and CMake.

Note: As a new version of the Android OS approaches release, previews and betas of that OS will be released and an NDK will be released that can make use of the new APIs. Targeting a preview API level is no different than targeting a released API level, with the exception that applications built targeting preview releases should not be shipped to production. Consult <NDK>/meta/platforms.json to determine the API level for a preview release.


Clang is installed to <NDK>/toolchains/llvm/prebuilt/<host-tag>/bin/clang. The C++ compiler is installed as clang++ in the same directory. clang++ will make C++ headers available when compiling and will automatically link the C++ runtime libraries when linking.

clang should be used when compiling C source files, and clang++ should be used when compiling C++ source files. When linking, clang should be used if the binary being linked contains no C++ code (i.e. none of the object files being linked were generated from C++ files) and clang++ should be used otherwise. Using clang++ ensures that the C++ standard library is linked.

Target Selection

Cross-compilation targets can be selected in one of two ways.

First, the --target flag can be used (see the Clang User Manual for more details on Clang's supported arguments). The value passed is a Clang target triple suffixed with an Android API level. For example, to target API 26 for 32-bit ARM, use --target armv7a-linux-androideabi26.

Note: “armv7a” should be used rather than simply “arm” when specifying targets for Clang to generate ARMv7 code rather than the slower ARMv5 code. Specifying ARMv5 and thumb code generation will result in Thumb-1 being generated rather than Thumb-2, which is less efficient.

Second, a target-specific Clang can be used. In addition to the clang and clang++ binaries, there are also <triple><API-level>-clang and <triple><API-level>-clang++ scripts. For example, to target API 26 32-bit ARM, invoke armv7a-linux-androideabi26-clang or armv7a-linux-androideabi26-clang++ instead of clang or clang++.

Note: Target specific Clangs are currently implemented as shell scripts. Linux and Mac NDKs have Bash scripts, Windows includes Bash scripts to support Cygwin and WSL but also batch scripts (with .cmd extensions) for Windows command line support. For large numbers of relatively small source files, the additional overhead caused by these scripts may be noticably slower than using --target, especially on Windows where CreateProcess is slower than fork.

For more information on Android targets, see the Architectures and OS Versions sections.


LLD is the default linker.

Gold is the fallback linker for most architectures, but BFD is used for AArch64 as Gold previously emitted broken debug information for that architecture (see Issue 70838247 for more details).

The linker used by Clang can be selected with the -fuse-ld=<linker> argument, passed during linking. For example, to use gold instead of LLD, pass -fuse-ld=gold when linking. No argument is required to use LLD.

The default linkers are installed to <NDK>/toolchains/llvm/prebuilt/<host-tag>/bin/<triple>-ld and <NDK>/toolchains/llvm/prebuilt/<host-tag>/<triple>/bin/ld. BFD and gold are installed as ld.bfd or in the same locations. The triple-prefixed executables in the common bin directory should be preferred to the triple-specific bin directory because the triple-specific directory will be removed when binutils is removed from the NDK.

Note: It is usually not necessary to invoke the linkers directly since Clang will do so automatically. Clang will also automatically link CRT objects and default libraries and set up other target-specific options, so it is generally better to use Clang for linking.

Warning: Using LLD with GNU strip or objcopy breaks RelRO. LLVM strip and objcopy must be used with LLD. See Issue 843 and the Binutils section of this document for more information.


LLVM's binutils tools are installed to the NDK at <NDK>/toolchains/llvm/prebuilt/<host-tag>/bin/llvm-<tool>. These include but are not limited to:

  • llvm-ar
  • llvm-objcopy
  • llvm-objdump
  • llvm-readelf
  • llvm-strip

Note that llvm-as is not an equivalent of GNU as, but rather a tool for assembling LLVM IR. If you are currently using as directly, you will need to migrate to using clang as a driver for building assembly.

GNU Binutils remains available for now but is deprecated and will be removed in an upcoming release of the NDK. Those tools are installed to <NDK>/toolchains/llvm/prebuilt/<host-tag>/bin/<triple>-<tool> and <NDK>/toolchains/llvm/prebuilt/<host-tag>/<triple>/bin/<tool>.

Note that binutils as is used by Clang if the -fno-integrated-as argument is used.


The Android sysroot is installed to <NDK>/toolchains/llvm/prebuilt/<host-tag>/sysroot and contains the headers, libraries, and CRT object files for each Android target.

Headers can be found in the usr/include directory of the sysroot. Target specific include files are installed to usr/include/<triple>. When using Clang, it is not necessary to include these directories explicitly; Clang will automatically select the sysroot. If using a compiler other than Clang, ensure that the target-specific include directory takes precedence over the target-generic directory.

Libraries are found in the usr/lib/<triple> directory of the sysroot. Version-specific libraries are installed to usr/lib/<triple>/<API-level>. As with the header files, when using Clang it is not necessary to include these directories explicitly; the sysroot will be automatically selected. If using a compiler other than Clang, ensure that the version-specific library directory takes precedence over the version-generic directory.


The NDK contains three types of libraries. Static libraries have a .a file extension and are linked directly into app binaries. Shared libraries have a .so file extension and must be included in the app's APK if used. System stub libraries are a special type of shared library that should not be included in the APK. The system stub libraries define the interface of a library that is provided by the Android OS but contain no implementation. They can be identified by their .so file extension and their presence in <NDK>/meta/system_libs.json. The entries in this file are a key/value pair that maps library names to the first API level the library is introduced.



The STL provided by the NDK is libc++. Its headers are installed to <NDK>/sysroot/usr/include/c++/v1. This STL is used by default. This STL comes in both a static and shared variant. The shared variant is used by default. To use the static variant, pass -static-libstdc++ when linking. If using the shared variant, must be included in the APK. This library is installed to <NDK>/sysroot/usr/lib/<triple>.

Warning: There are a number of things to consider when selecting between the shared and static STLs. See the Important Considerations section of the C++ Support document for more details.

There are version-specific and libc++.a libraries installed to <NDK>/sysroot/usr/lib/<triple>/<version>. These are not true libraries but implicit linker scripts. They inform the linker how to properly link the STL for the given version. Older OS versions may require that a compatibility library (libandroid_support) be linked with libc++ to provide APIs not available in those versions. These scripts also handle the inclusion of any libc++ dependencies if necessary. Linker scripts should not be included in the APK.

Build systems should prefer to let Clang link the STL. If not using Clang, the version scripts should be used. Linking libc++ and its dependencies manually should only be used as a last resort.

Note: Linking libc++ and its dependencies explicitly may be necessary to defend against exception unwinding bugs caused by improperly built dependencies (see Issue 379). If not dependent on stack unwinding (the usual reason being that the application does not make use of C++ exceptions) or if no dependencies were improperly built, this is not necessary. If needed, link the libraries as listed in the linker script and be sure to follow the instructions in Unwinding.

System STL

The legacy “system STL” is also included, but it will be removed in a future NDK release. It is not in fact an STL; it contains only the barest C++ library support: the C++ versions of the C library headers and basic C++ runtime support like new and delete. Its headers are installed to <NDK>/toolchains/llvm/prebuilt/<host-tag>/include/c++/4.9.x and its library is the system stub library. To use this STL, use the -stdlib=libstdc++ flag.

TODO: Shouldn't it be installed to sysroot like libc++?

Note: The system STL will likely be removed in a future NDK release.


To avoid using the STL at all, pass -nostdinc++ when compiling and -nostdlib++ when linking. This is not necessary when using clang, only when using clang++.


The NDK supports Address Sanitizer (ASan). This tool is similar to Valgrind in that it diagnoses memory bugs in a running application, but ASan is much faster than Valgrind (roughly 50% performance compared to an unsanitized application).

To use ASan, pass -fsanitize=address when both compiling and linking. The sanitizer runtime libraries are installed to <NDK>/toolchains/llvm/prebuilt/<host-tag>/lib64/clang/<clang-version>/lib/linux. The library is named libclang_rt.asan-<arch> This library must be included in the APK. A file must also be included in the APK. A premade file for ASan is installed to <NDK>/

Note: is only available for debuggable APKs running on Android Oreo (API 26) or higher. ASan can still be used devices prior to Oreo but at least Lollipop (API 21) if the device has been rooted. Direct users to the AddressSanitizerOnAndroid document for instructions on using this method.

Additional Required Arguments

Note: It is a bug that any of these need to be specified by the build system. All flags discussed in this section should be automatically selected by Clang, but they are not yet. Check back in a future NDK release to see if any can be removed from your build system.

For x86 targets prior to Android Nougat (API 24), -mstackrealign is needed to properly align stacks for global constructors. See Issue 635.

Android requires Position-independent executables beginning with API 21. Clang builds PIE executables by default. If invoking the linker directly or not using Clang, use -pie when linking.

Clang does not properly set the ARMv7 architecture for the non-integrated assembler. If using -fno-integrated-as, you must explicitly pass -march=armv7-a when compiling for 32-bit ARM. Note that by default Clang will use the integrated assembler, and this flag is not needed in that case. See Issue 906.

Android Studio‘s LLDB debugger uses a binary’s build ID to locate debug information. To ensure that LLDB works with a binary, pass an option like -Wl,--build-id=sha1 to Clang when linking. Other --build-id= modes are OK, but avoid a plain --build-id argument when using LLD, because Android Studio‘s version of LLDB doesn’t recognize LLD's default 8-byte build ID. See Issue 885.

The unwinder used for crash handling on Android devices prior to API 29 cannot correctly unwind binaries built with -Wl,--rosegment. This flag is enabled by default when using LLD, so if using LLD and targeting devices older than API 29 you must pass -Wl,--no-rosegment when linking for correct stack traces in logcat. See Issue 1196.

Useful Arguments

Dependency Management

It is recommended that -Wl,--exclude-libs,<library file name> be used for each static library linked. This causes the linker to give symbols imported from a static library hidden visibility. This prevents a binary from unintentionally re-exporting an API other than its own. If the intent is to re-export all the symbols in a static library, -Wl,--whole-archive <library> -Wl,--no-whole-archive should be used to ensure that the whole archive is preserved. By default, only symbols in used sections will be included in the linked binary.

Controlling Binary Size

To minimize the size of an APK, it may be desirable to use the -Oz optimization mode. This will generate somewhat slower code than -O2 or -O3, but it will be smaller.

Note: -Os behavior is not the same with Clang as it is with GCC. Clang‘s -Oz behaves similarly to GCC’s -Os. -Os with Clang is a middle ground between size and speed optimizations.

To aid the linker in removing as much unused code as possible, the compiler flags -ffunction-sections and -fdata-sections may be used. These flags should only be used in conjunction with the -Wl,--gc-sections linker flag. Failing to use -Wl,--gc-sections will cause the former flags to increase output size. The linker is only able to discard unused sections, so it can only discard at per-function or per-variable granularity if each is in its own section.

While -Wl,--gc-sections should always be used, whether or not to enable -ffunction-sections and -fdata-sections depends on how the object file being compiled is expected to be used. If it will be used in a shared library then all of its public symbols will be preserved and the additional overhead of placing each item in its own section may make the shared library larger rather than smaller. If it will be used only in a static library or an executable then it will depend on how much of the resulting object file is expected to be unused.

Helpful Warnings

It is recommended that build systems promote the following warnings to errors. These warnings indicate either a bug or undefined behavior, the latter of which Clang will usually turn into a bug.

  • -Werror=return-type: A non-void function is missing a return statement. Clang may “optimize” this function to fall through into the next one.
  • -Werror=int-to-pointer-cast and -Werror=pointer-to-int-cast: These indicate bugs that will affect the 64-bit version of the application.
  • -Werror=implicit-function-declaration: Undeclared functions may be inferred to have a return type of int in C. For functions that return a pointer, the return type will be silently truncated to a 32-bit int, resulting in bugs that will affect the 64-bit version of the application.

For more information on Clang's supported arguments, see the Clang User Manual.


Stack protectors

It is recommented to build all code with -fstack-protector-strong. This causes the compiler to emit stack guards to protect against security vulnerabilities caused by buffer overruns.

Note: ndk-build and the NDK's CMake toolchain file enable this option by default.


FORTIFY is a set of extensions to the C standard library that tries to catch the incorrect use of standard functions, such as memset, sprintf, and open. Where possible, runtime bugs will be diagnosed as errors at compile-time. If not provable at compile-time, a run-time check is used. Note that the specific set of APIs checked depends on the minSdkVersion used, since run-time support is required. See FORTIFY in Android for more details.

To enable this feature in your build define _FORTIFY_SOURCE=2 when compiling.

Note: ndk-build and the NDK's CMake toolchain file enable this option by default.

Common Issues


The NDK uses LLVM‘s libunwind. libunwind is needed to provide C++ exception handling support and C’s __attribute__((cleanup)). The unwinder is linked automatically by Clang, and is built with hidden visibility to avoid shared libraries re-exporting the unwind interface.

Until NDK r23, libgcc was the unwinder for all architectures other than 32-bit ARM, and even 32-bit ARM used libgcc to provide compiler runtime support. Libraries built with NDKs older than r23 by build systems that did not follow the advice in this document may re-export that incompatible unwinder. In this case those libraries can prevent the correct unwinder from being used by your build, resulting in crashes or incorrect behavior at runtime.

The best way to avoid this problem is to ensure all libraries in the application were built with NDK r23 or newer.

For cases where that is not an option, build systems can ensure that shared libraries are always linked after static libraries, and explicitly link the unwinder between each group. The linker will prefer definitions that appear sooner in the link order, so libunwind appearing before the shared libraries will prevent the linker from considering the incompatible unwinder provided by the broken library. libunwind must be linked after other static libraries to provide the unwind interface to those static libraries.

The following link order will protect against incorrectly built dependencies:

  1. crtbegin
  2. object files
  3. static libraries
  4. libunwind
  5. shared libraries
  6. crtend

Unless using -nostdlib when linking, crtend and crtbegin will be linked automatically by Clang. libunwind can be manually linked with -lunwind.

Windows Specific Issues

Command Line Length Limits

Command line length limits on Windows are short enough that they can pose problems when building large projects. Commands executed via cmd.exe are limited to 8,191 characters and commands executed with CreateProcess are limited to 32,768 characters.

To work around these issues, Clang, the linkers, and the archiver all accept a response file that specifies the input files in place of specifying each input explicitly on the command line. Response files are identified on the command line with a “@” prefix and are formatted as space separated arguments. For example:

$ ar crsD liba.a @inputs.rsp

If the contents of inputs.rsp are a.o b.o c.o then ar will insert a.o, b.o, and c.o into liba.a.

Path Length Limits

Windows paths are limited to 260 characters, including the drive letter, colon, backslash, and terminating null. See Microsoft's documentation on path length limits for possible solutions.

Performance Differences

Our experience shows that builds on Windows are generally slower than they are on Linux. The cost of CreateProcess in comparison to fork accounts for much of the difference, so it is best to minimize process creation in your build system.

File system performance can also make a large difference. This also appears to be the reason that Mac, while it has better build performance than Windows, still underperforms Linux.

Windows and Mac users will see optimum build performance in a Linux VM.