| /* |
| * Copyright (c) 2001, 2016, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| */ |
| |
| // SunJSSE does not support dynamic system properties, no way to re-use |
| // system properties in samevm/agentvm mode. |
| |
| /* |
| * @test |
| * @bug 8051498 8145849 8170282 |
| * @summary JEP 244: TLS Application-Layer Protocol Negotiation Extension |
| * @compile MyX509ExtendedKeyManager.java |
| * |
| * @run main/othervm SSLSocketAlpnTest h2 UNUSED h2 h2 |
| * @run main/othervm SSLSocketAlpnTest h2 UNUSED h2,http/1.1 h2 |
| * @run main/othervm SSLSocketAlpnTest h2,http/1.1 UNUSED h2,http/1.1 h2 |
| * @run main/othervm SSLSocketAlpnTest http/1.1,h2 UNUSED h2,http/1.1 http/1.1 |
| * @run main/othervm SSLSocketAlpnTest h4,h3,h2 UNUSED h1,h2 h2 |
| * @run main/othervm SSLSocketAlpnTest EMPTY UNUSED h2,http/1.1 NONE |
| * @run main/othervm SSLSocketAlpnTest h2 UNUSED EMPTY NONE |
| * @run main/othervm SSLSocketAlpnTest H2 UNUSED h2 ERROR |
| * @run main/othervm SSLSocketAlpnTest h2 UNUSED http/1.1 ERROR |
| * |
| * @run main/othervm SSLSocketAlpnTest UNUSED h2 h2 h2 |
| * @run main/othervm SSLSocketAlpnTest UNUSED h2 h2,http/1.1 h2 |
| * @run main/othervm SSLSocketAlpnTest UNUSED h2 http/1.1,h2 h2 |
| * @run main/othervm SSLSocketAlpnTest UNUSED http/1.1 h2,http/1.1 http/1.1 |
| * @run main/othervm SSLSocketAlpnTest UNUSED EMPTY h2,http/1.1 NONE |
| * @run main/othervm SSLSocketAlpnTest UNUSED h2 EMPTY NONE |
| * @run main/othervm SSLSocketAlpnTest UNUSED H2 h2 ERROR |
| * @run main/othervm SSLSocketAlpnTest UNUSED h2 http/1.1 ERROR |
| * |
| * @run main/othervm SSLSocketAlpnTest h2 h2 h2 h2 |
| * @run main/othervm SSLSocketAlpnTest H2 h2 h2,http/1.1 h2 |
| * @run main/othervm SSLSocketAlpnTest h2,http/1.1 http/1.1 h2,http/1.1 http/1.1 |
| * @run main/othervm SSLSocketAlpnTest http/1.1,h2 h2 h2,http/1.1 h2 |
| * @run main/othervm SSLSocketAlpnTest EMPTY h2 h2 h2 |
| * @run main/othervm SSLSocketAlpnTest h2,http/1.1 EMPTY http/1.1 NONE |
| * @run main/othervm SSLSocketAlpnTest h2,http/1.1 h2 EMPTY NONE |
| * @run main/othervm SSLSocketAlpnTest UNUSED UNUSED http/1.1,h2 NONE |
| * @run main/othervm SSLSocketAlpnTest h2 h2 http/1.1 ERROR |
| * @run main/othervm SSLSocketAlpnTest h2,http/1.1 H2 http/1.1 ERROR |
| * |
| * @author Brad Wetmore |
| */ |
| /** |
| * A simple SSLSocket-based client/server that demonstrates the proposed API |
| * changes for JEP 244 in support of the TLS ALPN extension (RFC 7301). |
| * |
| * Usage: |
| * java SSLSocketAlpnTest <server-APs> <callback-AP> <client-APs> <result> |
| * |
| * where: |
| * EMPTY indicates that ALPN is disabled |
| * UNUSED indicates that no ALPN values are supplied (server-side only) |
| * ERROR indicates that an exception is expected |
| * NONE indicates that no ALPN is expected |
| * |
| * This example is based on our standard SSLSocketTemplate. |
| */ |
| import java.io.*; |
| import java.security.KeyStore; |
| import java.util.Arrays; |
| |
| import javax.net.ssl.*; |
| |
| public class SSLSocketAlpnTest { |
| |
| /* |
| * ============================================================= |
| * Set the various variables needed for the tests, then |
| * specify what tests to run on each side. |
| */ |
| |
| /* |
| * Should we run the client or server in a separate thread? |
| * Both sides can throw exceptions, but do you have a preference |
| * as to which side should be the main thread. |
| */ |
| static boolean separateServerThread = false; |
| |
| /* |
| * Where do we find the keystores? |
| */ |
| static String pathToStores = "../etc"; |
| static String keyStoreFile = "keystore"; |
| static String trustStoreFile = "truststore"; |
| static String passwd = "passphrase"; |
| |
| static String keyFilename = System.getProperty("test.src", ".") + "/" |
| + pathToStores + "/" + keyStoreFile; |
| static String trustFilename = System.getProperty("test.src", ".") + "/" |
| + pathToStores + "/" + trustStoreFile; |
| |
| private static boolean hasServerAPs; // whether server APs are present |
| private static boolean hasCallback; // whether a callback is present |
| |
| /* |
| * SSLContext |
| */ |
| SSLContext mySSLContext = null; |
| |
| /* |
| * Is the server ready to serve? |
| */ |
| volatile static boolean serverReady = false; |
| |
| /* |
| * Turn on SSL debugging? |
| */ |
| static boolean debug = false; |
| |
| static String[] serverAPs; |
| static String callbackAP; |
| static String[] clientAPs; |
| static String expectedAP; |
| |
| /* |
| * If the client or server is doing some kind of object creation |
| * that the other side depends on, and that thread prematurely |
| * exits, you may experience a hang. The test harness will |
| * terminate all hung threads after its timeout has expired, |
| * currently 3 minutes by default, but you might try to be |
| * smart about it.... |
| */ |
| |
| /* |
| * Define the server side of the test. |
| * |
| * If the server prematurely exits, serverReady will be set to true |
| * to avoid infinite hangs. |
| */ |
| void doServerSide() throws Exception { |
| SSLServerSocketFactory sslssf = mySSLContext.getServerSocketFactory(); |
| SSLServerSocket sslServerSocket |
| = (SSLServerSocket) sslssf.createServerSocket(serverPort); |
| // for both client/server to call into X509KM |
| sslServerSocket.setNeedClientAuth(true); |
| |
| serverPort = sslServerSocket.getLocalPort(); |
| |
| /* |
| * Signal Client, we're ready for his connect. |
| */ |
| serverReady = true; |
| |
| SSLSocket sslSocket = (SSLSocket) sslServerSocket.accept(); |
| |
| SSLParameters sslp = sslSocket.getSSLParameters(); |
| |
| /* |
| * The default ciphersuite ordering from the SSLContext may not |
| * reflect "h2" ciphersuites as being preferred, additionally the |
| * client may not send them in an appropriate order. We could resort |
| * the suite list if so desired. |
| */ |
| String[] suites = sslp.getCipherSuites(); |
| sslp.setCipherSuites(suites); |
| sslp.setUseCipherSuitesOrder(true); // Set server side order |
| |
| // Set the ALPN selection. |
| if (serverAPs != null) { |
| sslp.setApplicationProtocols(serverAPs); |
| } |
| sslSocket.setSSLParameters(sslp); |
| |
| if (sslSocket.getHandshakeApplicationProtocol() != null) { |
| throw new Exception ("getHandshakeApplicationProtocol() should " |
| + "return null before the handshake starts"); |
| } |
| |
| // check that no callback has been registered |
| if (sslSocket.getHandshakeApplicationProtocolSelector() != null) { |
| throw new Exception("getHandshakeApplicationProtocolSelector() " + |
| "should return null"); |
| } |
| |
| if (hasCallback) { |
| sslSocket.setHandshakeApplicationProtocolSelector( |
| (serverSocket, clientProtocols) -> { |
| return callbackAP.equals("EMPTY") ? "" : callbackAP; |
| }); |
| |
| // check that the callback can be retrieved |
| if (sslSocket.getHandshakeApplicationProtocolSelector() == null) { |
| throw new Exception("getHandshakeApplicationProtocolSelector()" + " should return non-null"); |
| } |
| } |
| |
| sslSocket.startHandshake(); |
| |
| if (sslSocket.getHandshakeApplicationProtocol() != null) { |
| throw new Exception ("getHandshakeApplicationProtocol() should " |
| + "return null after the handshake is completed"); |
| } |
| |
| String ap = sslSocket.getApplicationProtocol(); |
| System.out.println("Application Protocol: \"" + ap + "\""); |
| |
| if (ap == null) { |
| throw new Exception( |
| "Handshake was completed but null was received"); |
| } |
| if (expectedAP.equals("NONE")) { |
| if (!ap.isEmpty()) { |
| throw new Exception("Expected no ALPN value"); |
| } else { |
| System.out.println("No ALPN value negotiated, as expected"); |
| } |
| } else if (!expectedAP.equals(ap)) { |
| throw new Exception(expectedAP |
| + " ALPN value not available on negotiated connection"); |
| } |
| |
| InputStream sslIS = sslSocket.getInputStream(); |
| OutputStream sslOS = sslSocket.getOutputStream(); |
| |
| sslIS.read(); |
| sslOS.write(85); |
| sslOS.flush(); |
| |
| sslSocket.close(); |
| } |
| |
| /* |
| * Define the client side of the test. |
| * |
| * If the server prematurely exits, serverReady will be set to true |
| * to avoid infinite hangs. |
| */ |
| void doClientSide() throws Exception { |
| |
| /* |
| * Wait for server to get started. |
| */ |
| while (!serverReady) { |
| Thread.sleep(50); |
| } |
| |
| SSLSocketFactory sslsf = mySSLContext.getSocketFactory(); |
| SSLSocket sslSocket |
| = (SSLSocket) sslsf.createSocket("localhost", serverPort); |
| |
| SSLParameters sslp = sslSocket.getSSLParameters(); |
| |
| /* |
| * The default ciphersuite ordering from the SSLContext may not |
| * reflect "h2" ciphersuites as being preferred, additionally the |
| * client may not send them in an appropriate order. We could resort |
| * the suite list if so desired. |
| */ |
| String[] suites = sslp.getCipherSuites(); |
| sslp.setCipherSuites(suites); |
| sslp.setUseCipherSuitesOrder(true); // Set server side order |
| |
| // Set the ALPN selection. |
| sslp.setApplicationProtocols(clientAPs); |
| sslSocket.setSSLParameters(sslp); |
| |
| if (sslSocket.getHandshakeApplicationProtocol() != null) { |
| throw new Exception ("getHandshakeApplicationProtocol() should " |
| + "return null before the handshake starts"); |
| } |
| |
| sslSocket.startHandshake(); |
| |
| if (sslSocket.getHandshakeApplicationProtocol() != null) { |
| throw new Exception ("getHandshakeApplicationProtocol() should " |
| + "return null after the handshake is completed"); |
| } |
| |
| /* |
| * Check that the resulting connection meets our defined ALPN |
| * criteria. If we were connecting to a non-JSSE implementation, |
| * the server might have negotiated something we shouldn't accept. |
| */ |
| String ap = sslSocket.getApplicationProtocol(); |
| System.out.println("Application Protocol: \"" + ap + "\""); |
| |
| if (ap == null) { |
| throw new Exception( |
| "Handshake was completed but null was received"); |
| } |
| if (expectedAP.equals("NONE")) { |
| if (!ap.isEmpty()) { |
| throw new Exception("Expected no ALPN value"); |
| } else { |
| System.out.println("No ALPN value negotiated, as expected"); |
| } |
| } else if (!expectedAP.equals(ap)) { |
| throw new Exception(expectedAP |
| + " ALPN value not available on negotiated connection"); |
| } |
| |
| InputStream sslIS = sslSocket.getInputStream(); |
| OutputStream sslOS = sslSocket.getOutputStream(); |
| |
| sslOS.write(280); |
| sslOS.flush(); |
| sslIS.read(); |
| |
| sslSocket.close(); |
| } |
| |
| /* |
| * ============================================================= |
| * The remainder is just support stuff |
| */ |
| // use any free port by default |
| volatile int serverPort = 0; |
| |
| volatile Exception serverException = null; |
| volatile Exception clientException = null; |
| |
| public static void main(String[] args) throws Exception { |
| |
| if (debug) { |
| System.setProperty("javax.net.debug", "all"); |
| } |
| System.out.println("Test args: " + Arrays.toString(args)); |
| |
| // Validate parameters |
| if (args.length != 4) { |
| throw new Exception("Invalid number of test parameters"); |
| } |
| serverAPs = convert(args[0]); |
| callbackAP = args[1]; |
| clientAPs = convert(args[2]); |
| expectedAP = args[3]; |
| |
| hasServerAPs = !args[0].equals("UNUSED"); // are server APs being used? |
| hasCallback = !callbackAP.equals("UNUSED"); // is callback being used? |
| |
| /* |
| * Start the tests. |
| */ |
| try { |
| new SSLSocketAlpnTest(); |
| } catch (SSLHandshakeException she) { |
| if (args[3].equals("ERROR")) { |
| System.out.println("Caught the expected exception: " + she); |
| } else { |
| throw she; |
| } |
| } |
| |
| System.out.println("Test Passed."); |
| } |
| |
| SSLContext getSSLContext(String keyFilename, String trustFilename) |
| throws Exception { |
| SSLContext ctx = SSLContext.getInstance("TLS"); |
| |
| // Keystores |
| KeyStore keyKS = KeyStore.getInstance("JKS"); |
| keyKS.load(new FileInputStream(keyFilename), passwd.toCharArray()); |
| |
| KeyStore trustKS = KeyStore.getInstance("JKS"); |
| trustKS.load(new FileInputStream(trustFilename), passwd.toCharArray()); |
| |
| // Generate KeyManager and TrustManager |
| KeyManagerFactory kmf = KeyManagerFactory.getInstance("SunX509"); |
| kmf.init(keyKS, passwd.toCharArray()); |
| |
| KeyManager[] kms = kmf.getKeyManagers(); |
| if (!(kms[0] instanceof X509ExtendedKeyManager)) { |
| throw new Exception("kms[0] not X509ExtendedKeyManager"); |
| } |
| |
| kms = new KeyManager[] { new MyX509ExtendedKeyManager( |
| (X509ExtendedKeyManager) kms[0], expectedAP, |
| !hasCallback && hasServerAPs) }; |
| |
| TrustManagerFactory tmf = TrustManagerFactory.getInstance("SunX509"); |
| tmf.init(trustKS); |
| TrustManager[] tms = tmf.getTrustManagers(); |
| |
| // initial SSLContext |
| ctx.init(kms, tms, null); |
| |
| return ctx; |
| } |
| |
| /* |
| * Convert a comma-separated list into an array of strings. |
| */ |
| private static String[] convert(String list) { |
| if (list.equals("UNUSED")) { |
| return null; |
| } |
| |
| if (list.equals("EMPTY")) { |
| return new String[0]; |
| } |
| |
| String[] strings; |
| if (list.indexOf(',') > 0) { |
| strings = list.split(","); |
| } else { |
| strings = new String[]{ list }; |
| } |
| |
| return strings; |
| } |
| |
| Thread clientThread = null; |
| Thread serverThread = null; |
| |
| /* |
| * Primary constructor, used to drive remainder of the test. |
| * |
| * Fork off the other side, then do your work. |
| */ |
| SSLSocketAlpnTest() throws Exception { |
| Exception startException = null; |
| mySSLContext = getSSLContext(keyFilename, trustFilename); |
| try { |
| if (separateServerThread) { |
| startServer(true); |
| startClient(false); |
| } else { |
| startClient(true); |
| startServer(false); |
| } |
| } catch (Exception e) { |
| startException = e; |
| } |
| |
| /* |
| * Wait for other side to close down. |
| */ |
| if (separateServerThread) { |
| if (serverThread != null) { |
| serverThread.join(); |
| } |
| } else { |
| if (clientThread != null) { |
| clientThread.join(); |
| } |
| } |
| |
| /* |
| * When we get here, the test is pretty much over. |
| * Which side threw the error? |
| */ |
| Exception local; |
| Exception remote; |
| |
| if (separateServerThread) { |
| remote = serverException; |
| local = clientException; |
| } else { |
| remote = clientException; |
| local = serverException; |
| } |
| |
| Exception exception = null; |
| |
| /* |
| * Check various exception conditions. |
| */ |
| if ((local != null) && (remote != null)) { |
| // If both failed, return the curthread's exception. |
| local.initCause(remote); |
| exception = local; |
| } else if (local != null) { |
| exception = local; |
| } else if (remote != null) { |
| exception = remote; |
| } else if (startException != null) { |
| exception = startException; |
| } |
| |
| /* |
| * If there was an exception *AND* a startException, |
| * output it. |
| */ |
| if (exception != null) { |
| if (exception != startException && startException != null) { |
| exception.addSuppressed(startException); |
| } |
| throw exception; |
| } |
| |
| // Fall-through: no exception to throw! |
| } |
| |
| void startServer(boolean newThread) throws Exception { |
| if (newThread) { |
| serverThread = new Thread() { |
| @Override |
| public void run() { |
| try { |
| doServerSide(); |
| } catch (Exception e) { |
| /* |
| * Our server thread just died. |
| * |
| * Release the client, if not active already... |
| */ |
| System.err.println("Server died..."); |
| serverReady = true; |
| serverException = e; |
| } |
| } |
| }; |
| serverThread.start(); |
| } else { |
| try { |
| doServerSide(); |
| } catch (Exception e) { |
| serverException = e; |
| } finally { |
| serverReady = true; |
| } |
| } |
| } |
| |
| void startClient(boolean newThread) throws Exception { |
| if (newThread) { |
| clientThread = new Thread() { |
| @Override |
| public void run() { |
| try { |
| doClientSide(); |
| } catch (Exception e) { |
| /* |
| * Our client thread just died. |
| */ |
| System.err.println("Client died..."); |
| clientException = e; |
| } |
| } |
| }; |
| clientThread.start(); |
| } else { |
| try { |
| doClientSide(); |
| } catch (Exception e) { |
| clientException = e; |
| } |
| } |
| } |
| } |
