<!DOCTYPE HTML>
<!--
 Copyright (c) 1998, 2017, Oracle and/or its affiliates. All rights reserved.
 DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 This code is free software; you can redistribute it and/or modify it
 under the terms of the GNU General Public License version 2 only, as
 published by the Free Software Foundation.  Oracle designates this
 particular file as subject to the "Classpath" exception as provided
 by Oracle in the LICENSE file that accompanied this code.

 This code is distributed in the hope that it will be useful, but WITHOUT
 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 version 2 for more details (a copy is included in the LICENSE file that
 accompanied this code).

 You should have received a copy of the GNU General Public License version
 2 along with this work; if not, write to the Free Software Foundation,
 Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 or visit www.oracle.com if you need additional information or have any
 questions.
-->
<HTML>
<HEAD>
	<META HTTP-EQUIV="CONTENT-TYPE" CONTENT="text/html; charset=iso-8859-1">
	<TITLE>Networking Properties</TITLE>
</HEAD>
<BODY LANG="en-US" DIR="LTR">
<H1 style="text-align:center">Networking Properties</H1>
<P>There are a few standard system properties used to
alter the mechanisms and behavior of the various classes of the
java.net package. Some are checked only once at startup of the VM,
and therefore are best set using the -D option of the java command,
while others have a more dynamic nature and can also be changed using
the <a href="../../lang/System.html#setProperty(java.lang.String,%20java.lang.String)">System.setProperty()</a> API.
The purpose of this document is to list
and detail all of these properties.</P>
<P>If there is no special note, a property value is checked every time it is used.</P>
<a id="Ipv4IPv6"></a>
<H2>IPv4 / IPv6</H2>
<UL>
	<LI><P><B>java.net.preferIPv4Stack</B> (default: false)<BR>
	If IPv6 is available on the operating system the
	underlying native socket will be, by default, an IPv6 socket which
	lets applications connect to, and accept connections from, both
	IPv4 and IPv6 hosts. However, in the case an application would
	rather use IPv4 only sockets, then this property can be set to <B>true</B>.
	The implication is that it will not be possible for the application
	to communicate with IPv6 only hosts.</P>
	<LI><P><B>java.net.preferIPv6Addresses</B> (default: false)<BR>
	When dealing with a host which has both IPv4
	and IPv6 addresses, and if IPv6 is available on the operating
	system, the default behavior is to prefer using IPv4 addresses over
	IPv6 ones. This is to ensure backward compatibility, for example
	applications that depend on the representation of an IPv4 address
	(e.g. 192.168.1.1). This property can be set to <B>true</B> to
	change that preference and use IPv6 addresses over IPv4 ones where
	possible, or <B>system</B> to preserve the order of the addresses as
    returned by the operating system.</P>
</UL>
<P>Both of these properties are checked only once, at startup.</P>
<a id="Proxies"></a>
<H2>Proxies</H2>
<P>A proxy server allows indirect connection to network services and
is used mainly for security (to get through firewalls) and
performance reasons (proxies often do provide caching mechanisms).
The following properties allow for configuration of the various type
of proxies.</P>
<UL>
	<LI><P>HTTP</P>
	<P>The following proxy settings are used by the HTTP protocol handler.</P>
	<UL>
		<LI><P><B>http.proxyHost</B> (default: &lt;none&gt;)<BR>
	        The hostname, or address, of the proxy server
		</P>
		<LI><P><B>http.proxyPort</B> (default: 80)<BR>
	        The port number of the proxy server.</P>
		<LI><P><B>http.nonProxyHosts</B> (default:  localhost|127.*|[::1])<BR>
	        Indicates the hosts that should be accessed without going
	        through the proxy. Typically this defines internal hosts.
	        The value of this property is a list of hosts,
		separated by the '|' character. In addition the wildcard
	        character '*' can be used for pattern matching. For example
		<code>-Dhttp.nonProxyHosts=&rdquo;*.foo.com|localhost&rdquo;</code>
		will indicate that every hosts in the foo.com domain and the
		localhost should be accessed directly even if a proxy server is
		specified.</P>
                <P>The default value excludes all common variations of the loopback address.</P>
        </UL>
	<LI><P>HTTPS<BR>This is HTTP over SSL, a secure version of HTTP
	mainly used when confidentiality (like on payment sites) is needed.</P>
	<P>The following proxy settings are used by the HTTPS protocol handler.</P>
	<UL>
		<LI><P><B>https.proxyHost</B>(default: &lt;none&gt;)<BR>
	        The hostname, or address, of the proxy server
		</P>
		<LI><P><B>https.proxyPort</B> (default: 443)<BR>
	        The port number of the proxy server.</P>
		<P>The HTTPS protocol handler will use the same nonProxyHosts
		property as the HTTP protocol.</P>
	</UL>
	<LI><P>FTP</P>
	<P>The following proxy settings are used by the FTP protocol handler.</P>
	<UL>
		<LI><P><B>ftp.proxyHost</B>(default: &lt;none&gt;)<BR>
	        The hostname, or address, of the proxy server
		</P>
		<LI><P><B>ftp.proxyPort</B> (default: 80)<BR>
	        The port number of the proxy server.</P>
		<LI><P><B>ftp.nonProxyHosts</B> (default: localhost|127.*|[::1])<BR>
	        Indicates the hosts that should be accessed without going
	        through the proxy. Typically this defines internal hosts.
	        The value of this property is a list of hosts, separated by
	        the '|' character. In addition the wildcard character
		'*' can be used for pattern matching. For example
		<code>-Dhttp.nonProxyHosts=&rdquo;*.foo.com|localhost&rdquo;</code>
		will indicate that every hosts in the foo.com domain and the
		localhost should be accessed directly even if a proxy server is
		specified.</P>
                <P>The default value excludes all common variations of the loopback address.</P>
	</UL>
	<LI><P>SOCKS<BR>This is another type of proxy. It allows for lower
	level type of tunneling since it works at the TCP level. In effect,
	in the Java(tm) platform setting a SOCKS proxy server will result in
	all TCP connections to go through that proxy, unless other proxies
	are specified. If SOCKS is supported by a Java SE implementation, the
	following properties will be used:</P>
	<UL>
		<LI><P><B>socksProxyHost</B> (default: &lt;none&gt;)<BR>
	        The hostname, or address, of the proxy server.</P>
		<LI><P><B>socksProxyPort</B> (default: 1080)<BR>
	        The port number of the proxy server.</P>
                <LI><P><B>socksProxyVersion</B> (default: 5)<BR>
                The version of the SOCKS protocol supported by the server. The
                default is <code>5</code> indicating SOCKS V5, alternatively
                <code>4</code> can be specified for SOCKS V4. Setting the property
                to values other than these leads to unspecified behavior.</P>
		<LI><P><B>java.net.socks.username</B> (default: &lt;none&gt;)<BR>
	        Username to use if the SOCKSv5 server asks for authentication
	        and no java.net.Authenticator instance was found.</P>
		<LI><P><B>java.net.socks.password</B> (default: &lt;none&gt;)<BR>
	        Password to use if the SOCKSv5 server asks for authentication
	        and no java.net.Authenticator instance was found.</P>
		<P>Note that if no authentication is provided with either the above
		properties or an Authenticator, and the proxy requires one, then
		the <B>user.name</B> property will be used with no password.</P>
	</UL>
	<LI><P><B>java.net.useSystemProxies</B> (default: false)<BR>
	On Windows systems, macOS systems and on Gnome systems it is possible to
	tell the java.net stack, setting this property to <B>true</B>, to use
	the system proxy settings (both	these systems let you set proxies
	globally through their user interface). Note that this property is
	checked only once at startup.</P>
</UL>
<a id="MiscHTTP"></a>
<H2>Misc HTTP properties</H2>
<UL>
	<LI><P><B>http.agent</B> (default: &ldquo;Java/&lt;version&gt;&rdquo;)<BR>
	Defines the string sent in the User-Agent request header in http
	requests. Note that the string &ldquo;Java/&lt;version&gt;&rdquo; will
	be appended to the one provided in the property (e.g. if
	-Dhttp.agent=&rdquo;foobar&rdquo; is used, the User-Agent header will
	contain &ldquo;foobar Java/1.5.0&rdquo; if the version of the VM is
	1.5.0). This property is checked only once at startup.</P>
	<LI><P><B>http.keepalive</B> (default: true)<BR>
	Indicates if persistent connections should be supported. They improve
	performance by allowing the underlying socket connection to be reused
	for multiple http requests. If this is set to true then persistent
	connections will be requested with HTTP 1.1 servers.</P>
	<LI><P><B>http.maxConnections</B> (default: 5)<BR>
	If HTTP keepalive is enabled (see above) this value determines the
	maximum number of idle connections that will be simultaneously kept
	alive, per destination.</P>
	<LI><P><B>http.maxRedirects</B> (default: 20)<BR>
	This integer value determines the maximum number, for a given request,
	of HTTP redirects that will be automatically followed by the
	protocol handler.</P>
	<LI><P><B>http.auth.digest.validateServer</B> (default: false)</P>
	<LI><P><B>http.auth.digest.validateProxy</B> (default: false)</P>
	<LI><P><B>http.auth.digest.cnonceRepeat</B> (default: 5)</P>
	<P>These 3 properties modify the behavior of the HTTP digest
	authentication mechanism. Digest authentication provides a limited
	ability for the server  to authenticate itself to the client (i.e.
	By proving it knows the user's password). However not all HTTP
	servers support this capability and by default it is turned off. The
	first two properties can be set to true to enforce this check for
	authentication with either an origin or proxy server, respectively.</P>
	<P>It is usually not necessary to change the third property. It
	determines how many times a cnonce value is re-used. This can be
	useful when the MD5-sess algorithm is being used. Increasing this
	value reduces the computational overhead on both client and server
	by reducing the amount of material that has to be hashed for each
	HTTP request.</P>
	<LI><P><B>http.auth.ntlm.domain</B> (default: &lt;none&gt;)<BR>
	NTLM is another authentication scheme. It uses the
	java.net.Authenticator class to acquire usernames and passwords when
	they are needed. However NTLM also needs the NT domain name. There are
	3 options for specifying that domain:</P>
	<OL>
	  <LI><P>Do not specify it. In some environments the domain is
	      actually not required and the application does not have to specify
	      it.</P>
	  <LI><P>The domain name can be encoded within the username by
	      prefixing the domain name, followed by a back-slash '\' before the
	      username. With this method existing applications that use the
	      authenticator class do not need to be modified, as long as users
	      are made aware that this notation must be used.</P>
	  <LI><P>If a domain name is not specified as in method 2) and these
	      property is defined, then its value will be used a the domain
	      name.</P>
	</OL>
</UL>
<P>All these properties are checked only once at startup.</P>
<a id="AddressCache"></a>
<H2>Address Cache</H2>
<P>The java.net package, when doing name resolution, uses an address
cache for both security and performance reasons. Any address
resolution attempt, be it forward (name to IP address) or reverse (IP
address to name), will have its result cached, whether it was
successful or not, so that subsequent identical requests will not
have to access the naming service. These properties allow for some
tuning on how the cache is operating.</P>
<UL>
	<LI><P><B>networkaddress.cache.ttl</B> (default: see below)<BR>
	Value is an integer corresponding to the number of seconds successful
	name lookups will be kept in the cache. A value of -1, or any  other
	negative value for that matter,	indicates a &ldquo;cache forever&rdquo;
	policy, while a value of 0 (zero) means no caching. The default value
	is -1 (forever) if a security manager is installed, and implementation
	specific when no security manager is installed.</P>
	<LI><P><B>networkaddress.cache.negative.ttl</B>	(default: 10)<BR>
	Value is an integer corresponding to the number of seconds an
	unsuccessful name lookup will be kept in the cache. A value of -1,
	or any negative value, means &ldquo;cache forever&rdquo;, while a
	value of 0 (zero) means no caching.</P>
</UL>
<P>Since these 2 properties are part of the security policy, they are
not set by either the -D option or the System.setProperty() API,
instead they are set as security properties.</P>
</BODY>
</HTML>