Merge Android R
Bug: 168057903
Merged-In: I3a68890be6d2c62299703dea85b8aad11771e5bc
Change-Id: I2a6db130c8057ccdda76ad04f16b4b0dd9bbf6aa
diff --git a/qcwcn/wifi_hal/common.h b/qcwcn/wifi_hal/common.h
index 0ed5a81..43b03ce 100644
--- a/qcwcn/wifi_hal/common.h
+++ b/qcwcn/wifi_hal/common.h
@@ -58,7 +58,9 @@
#define MAC_ADDR_ARRAY(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]
#define MAC_ADDR_STR "%02x:%02x:%02x:%02x:%02x:%02x"
+#ifndef BIT
#define BIT(x) (1 << (x))
+#endif
typedef int16_t s16;
typedef int32_t s32;
@@ -206,6 +208,10 @@
wifi_error wifi_set_radio_mode_change_handler(wifi_request_id id, wifi_interface_handle
iface, wifi_radio_mode_change_handler eh);
wifi_error mapKernelErrortoWifiHalError(int kern_err);
+void wifi_cleanup_dynamic_ifaces(wifi_handle handle);
+wifi_error wifi_virtual_interface_create(wifi_handle handle, const char* ifname,
+ wifi_interface_type iface_type);
+wifi_error wifi_virtual_interface_delete(wifi_handle handle, const char* ifname);
// some common macros
#define min(x, y) ((x) < (y) ? (x) : (y))
diff --git a/qcwcn/wifi_hal/ifaceeventhandler.cpp b/qcwcn/wifi_hal/ifaceeventhandler.cpp
index 8750999..6e70ab5 100644
--- a/qcwcn/wifi_hal/ifaceeventhandler.cpp
+++ b/qcwcn/wifi_hal/ifaceeventhandler.cpp
@@ -244,7 +244,7 @@
return -EINVAL;
}
mSet = nla_get_u32(tb_vendor[QCA_WLAN_VENDOR_ATTR_FEATURE_SET]);
- ALOGV("Supported feature set : %x", mSet);
+ ALOGV("Supported feature set : 0x%" PRIx64, mSet);
break;
}
@@ -304,7 +304,7 @@
__func__);
for(i = 0; i < *mSetSizePtr; i++)
{
- ALOGV("%x", *(mConcurrencySet + i));
+ ALOGV("0x%" PRIx64, *(mConcurrencySet + i));
}
}
}
@@ -549,13 +549,13 @@
mCapa->roaming_capa.max_whitelist_size = mCapa->gscan_capa.max_number_of_white_listed_ssid;
}
- if (!tbVendor[QCA_WLAN_VENDOR_ATTR_CAPABILITIES_MAX_NUM_BLACKLISTED_BSSID]) {
- ALOGE("%s: QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_CAPABILITIES_MAX"
- "_NUM_BLACKLIST_BSSID not found. Set to 0.", __FUNCTION__);
+ if (!tbVendor[QCA_WLAN_VENDOR_ATTR_GSCAN_MAX_NUM_BLACKLISTED_BSSID]) {
+ ALOGE("%s: QCA_WLAN_VENDOR_ATTR_GSCAN_MAX_NUM_BLACKLISTED_BSSID not found. Set to 0.",
+ __FUNCTION__);
mCapa->roaming_capa.max_blacklist_size = 0;
} else {
mCapa->roaming_capa.max_blacklist_size = nla_get_u32(tbVendor[
- QCA_WLAN_VENDOR_ATTR_CAPABILITIES_MAX_NUM_BLACKLISTED_BSSID]);
+ QCA_WLAN_VENDOR_ATTR_GSCAN_MAX_NUM_BLACKLISTED_BSSID]);
}
return WIFI_SUCCESS;
}
diff --git a/qcwcn/wifi_hal/nan.cpp b/qcwcn/wifi_hal/nan.cpp
index 549b381..ac378fa 100644
--- a/qcwcn/wifi_hal/nan.cpp
+++ b/qcwcn/wifi_hal/nan.cpp
@@ -1260,6 +1260,7 @@
//error case should not happen print log
ALOGE("%s: Wrong NAN subcmd received %d", __FUNCTION__, mSubcmd);
}
+ mNanVendorEvent = NULL;
return NL_SKIP;
}
diff --git a/qcwcn/wifi_hal/nan_rsp.cpp b/qcwcn/wifi_hal/nan_rsp.cpp
index 721ab49..f0b9b1c 100644
--- a/qcwcn/wifi_hal/nan_rsp.cpp
+++ b/qcwcn/wifi_hal/nan_rsp.cpp
@@ -350,7 +350,7 @@
char tlvInfo[NAN_ERROR_STR_LEN];
tlvInfo[0] = '\0';
- if (isNanResponse() || (is_ndp_rsp == true)){
+ if ((is_ndp_rsp == true) || isNanResponse()) {
pRsp = (NanResponseMsg*)pResponse;
for (i = 0; i < (int)(sizeof(errorCodeTranslation)/ sizeof(errorCode)); i++) {
if (errorCodeTranslation[i].firmwareError == firmwareErrorRecvd) {
diff --git a/qcwcn/wifi_hal/qca-vendor_copy.h b/qcwcn/wifi_hal/qca-vendor_copy.h
index df36ec0..8a56ab7 100644
--- a/qcwcn/wifi_hal/qca-vendor_copy.h
+++ b/qcwcn/wifi_hal/qca-vendor_copy.h
@@ -1,7 +1,10 @@
/*
* Qualcomm Atheros OUI and vendor specific assignments
* Copyright (c) 2014-2017, Qualcomm Atheros, Inc.
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018-2019, The Linux Foundation
+ *
+ * This software may be distributed under the terms of the BSD license.
+ * See README for more details.
*/
#ifndef QCA_VENDOR_H
@@ -16,6 +19,10 @@
#define OUI_QCA 0x001374
+#ifndef BIT
+#define BIT(x) (1U << (x))
+#endif
+
/**
* enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs
*/
@@ -39,15 +46,22 @@
*
* @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency
* ranges to avoid to reduce issues due to interference or internal
- * co-existence information in the driver. The event data structure is
- * defined in struct qca_avoid_freq_list.
+ * co-existence information in the driver. These frequencies aim to
+ * minimize the traffic but not to totally avoid the traffic. That said
+ * for a P2P use case, these frequencies are allowed for the P2P
+ * discovery/negotiation but avoid the group to get formed on these
+ * frequencies. The event data structure is defined in
+ * struct qca_avoid_freq_list.
*
* @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support
* for DFS offloading.
*
* @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass
* NAN Request/Response and NAN Indication messages. These messages are
- * interpreted between the framework and the firmware component.
+ * interpreted between the framework and the firmware component. While
+ * sending the command from userspace to the driver, payload is not
+ * encapsulated inside any attribute. Attribute QCA_WLAN_VENDOR_ATTR_NAN
+ * is used when receiving vendor events in userspace from the driver.
*
* @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be
* used to configure PMK to the driver even when not connected. This can
@@ -62,7 +76,7 @@
*
* @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to
* invoke the ACS function in device and pass selected channels to
- * hostapd.
+ * hostapd. Uses enum qca_wlan_vendor_attr_acs_offload attributes.
*
* @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features
* supported by the driver. enum qca_wlan_vendor_features defines
@@ -88,6 +102,9 @@
* which supports DFS offloading, to indicate a radar pattern has been
* detected. The channel is now unusable.
*
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO: Get information from the driver.
+ * Attributes defined in enum qca_wlan_vendor_attr_get_wifi_info.
+ *
* @QCA_NL80211_VENDOR_SUBCMD_GET_LOGGER_FEATURE_SET: Get the feature bitmap
* based on enum wifi_logger_supported_features. Attributes defined in
* enum qca_wlan_vendor_attr_get_logger_features.
@@ -152,6 +169,16 @@
* timer value. Uses the attributes defines in
* enum qca_wlan_vendor_attr_ocb_get_tsf_resp.
*
+ * @QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES: Command/event to update the
+ * link properties of the respective interface. As an event, is used
+ * to notify the connected station's status. The attributes for this
+ * command are defined in enum qca_wlan_vendor_attr_link_properties.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY: This command is used to configure
+ * DFS policy and channel hint for ACS operation. This command uses the
+ * attributes defined in enum qca_wlan_vendor_attr_acs_config and
+ * enum qca_acs_dfs_mode.
+ *
* @QCA_NL80211_VENDOR_SUBCMD_P2P_LISTEN_OFFLOAD_START: Command used to
* start the P2P Listen offload function in device and pass the listen
* channel, period, interval, count, device types, and vendor specific
@@ -358,7 +385,9 @@
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START: Start spectral scan. The scan
* parameters are specified by enum qca_wlan_vendor_attr_spectral_scan.
* This returns a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE)
- * identifying the operation in success case.
+ * identifying the operation in success case. In failure cases an
+ * error code (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE)
+ * describing the reason for the failure is returned.
*
* @QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_STOP: Stop spectral scan. This uses
* a cookie (%QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_COOKIE) from
@@ -450,6 +479,173 @@
* and STA MAC addresses added by the user. This command is also used to
* fetch the statistics of unassociated stations. The attributes used with
* this command are defined in enum qca_wlan_vendor_attr_bss_filter.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_NAN_EXT: An extendable version of NAN vendor
+ * command. The earlier command for NAN, QCA_NL80211_VENDOR_SUBCMD_NAN,
+ * carried a payload which was a binary blob of data. The command was not
+ * extendable to send more information. The newer version carries the
+ * legacy blob encapsulated within an attribute and can be extended with
+ * additional vendor attributes that can enhance the NAN command interface.
+ * @QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT: Event to indicate scan triggered
+ * or stopped within driver/firmware in order to initiate roaming. The
+ * attributes used with this event are defined in enum
+ * qca_wlan_vendor_attr_roam_scan. Some drivers may not send these events
+ * in few cases, e.g., if the host processor is sleeping when this event
+ * is generated in firmware.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG: This command is used to
+ * configure parameters per peer to capture Channel Frequency Response
+ * (CFR) and enable Periodic CFR capture. The attributes for this command
+ * are defined in enum qca_wlan_vendor_peer_cfr_capture_attr.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT: Event to indicate changes
+ * in throughput dynamically. The driver estimates the throughput based on
+ * number of packets being transmitted/received per second and indicates
+ * the changes in throughput to user space. Userspace tools can use this
+ * information to configure kernel's TCP parameters in order to achieve
+ * peak throughput. Optionally, the driver will also send guidance on
+ * modifications to kernel's TCP parameters which can be referred by
+ * userspace tools. The attributes used with this event are defined in enum
+ * qca_wlan_vendor_attr_throughput_change.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG: This command is used to set
+ * priorities among different types of traffic during coex scenarios.
+ * Current supported prioritization is among WLAN/BT/ZIGBEE with different
+ * profiles mentioned in enum qca_coex_config_profiles. The associated
+ * attributes used with this command are defined in enum
+ * qca_vendor_attr_coex_config.
+ *
+ * Based on the config provided, FW will boost the weight and prioritize
+ * the traffic for that subsystem (WLAN/BT/Zigbee).
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_AKMS: This command is used to query
+ * the supported AKM suite selectorss from the driver. It returns the list
+ * of supported AKMs in the attribute NL80211_ATTR_AKM_SUITES.
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE: This command is used to get firmware
+ * state from the driver. It returns the firmware state in the attribute
+ * QCA_WLAN_VENDOR_ATTR_FW_STATE.
+ * @QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH: This vendor subcommand
+ * is used by the driver to flush per-peer cached statistics to user space
+ * application. This interface is used as an event from the driver to
+ * user space application. Attributes for this event are specified in
+ * enum qca_wlan_vendor_attr_peer_stats_cache_params.
+ * QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA attribute is expected to be
+ * sent in the event.
+ * @QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG: This sub command is used to
+ * improve the success rate of Zigbee joining network.
+ * Due to PTA master limitation, Zigbee joining network success rate is
+ * low while WLAN is working. The WLAN driver needs to configure some
+ * parameters including Zigbee state and specific WLAN periods to enhance
+ * PTA master. All these parameters are delivered by the attributes
+ * defined in enum qca_mpta_helper_vendor_attr.
+ * @QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING: This sub command is used to
+ * implement Beacon frame reporting feature.
+ *
+ * Userspace can request the driver/firmware to periodically report
+ * received Beacon frames whose BSSID is same as the current connected
+ * BSS's MAC address.
+ *
+ * In case the STA seamlessly (without sending disconnect indication to
+ * userspace) roams to a different BSS, Beacon frame reporting will be
+ * automatically enabled for the Beacon frames whose BSSID is same as the
+ * MAC address of the new BSS. Beacon reporting will be stopped when the
+ * STA is disconnected (when the disconnect indication is sent to
+ * userspace) and need to be explicitly enabled by userspace for next
+ * connection.
+ *
+ * When a Beacon frame matching configured conditions is received, and if
+ * userspace has requested to send asynchronous beacon reports, the
+ * driver/firmware will encapsulate the details of the Beacon frame in an
+ * event and send it to userspace along with updating the BSS information
+ * in cfg80211 scan cache, otherwise driver will only update the cfg80211
+ * scan cache with the information from the received Beacon frame but will
+ * not send any active report to userspace.
+ *
+ * The userspace can request the driver/firmware to stop reporting Beacon
+ * frames. If the driver/firmware is not able to receive Beacon frames due
+ * to other Wi-Fi operations such as off-channel activities, etc., the
+ * driver/firmware will send a pause event to userspace and stop reporting
+ * Beacon frames. Whether the beacon reporting will be automatically
+ * resumed or not by the driver/firmware later will be reported to
+ * userspace using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES
+ * flag. The beacon reporting shall be resumed for all the cases except
+ * either when userspace sets
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_DO_NOT_RESUME flag in the command
+ * which triggered the current beacon reporting or during any disconnection
+ * case as indicated by setting
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED by the
+ * driver.
+ *
+ * After QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_PAUSE event is received
+ * by userspace with QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES
+ * flag not set, the next first
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO event from the driver
+ * shall be considered as un-pause event.
+ *
+ * All the attributes used with this command are defined in
+ * enum qca_wlan_vendor_attr_beacon_reporting_params.
+ * @QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP: In practice, some APs have
+ * interop issues with the DUT. This sub command is used to transfer the
+ * AP info between the driver and user space. This works both as a command
+ * and an event. As a command, it configures the stored list of APs from
+ * user space to firmware; as an event, it indicates the AP info detected
+ * by the firmware to user space for persistent storage. The attributes
+ * defined in enum qca_vendor_attr_interop_issues_ap are used to deliver
+ * the parameters.
+ * @QCA_NL80211_VENDOR_SUBCMD_OEM_DATA: This command/event is used to
+ * send/receive OEM data binary blobs to/from application/service to/from
+ * firmware. The attributes defined in enum
+ * qca_wlan_vendor_attr_oem_data_params are used to deliver the
+ * parameters.
+ * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT: This command/event is used
+ * to send/receive avoid frequency data using
+ * enum qca_wlan_vendor_attr_avoid_frequency_ext.
+ * This new command is alternative to existing command
+ * QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY since existing command/event
+ * is using stream of bytes instead of structured data using vendor
+ * attributes.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE: This vendor subcommand is used to
+ * add the STA node details in driver/firmware. Attributes for this event
+ * are specified in enum qca_wlan_vendor_attr_add_sta_node_params.
+ * @QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE: This command is used to set BT
+ * coex chain mode from application/service.
+ * The attributes defined in enum qca_vendor_attr_btc_chain_mode are used
+ * to deliver the parameters.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO: This vendor subcommand is used to
+ * get information of a station from driver to userspace. This command can
+ * be used in both STA and AP modes. For STA mode, it provides information
+ * of the current association when in connected state or the last
+ * association when in disconnected state. For AP mode, only information
+ * of the currently connected stations is available. This command uses
+ * attributes defined in enum qca_wlan_vendor_attr_get_sta_info.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_REQUEST_SAR_LIMITS_EVENT: This acts as an event.
+ * Host drivers can request the user space entity to set the SAR power
+ * limits with this event. Accordingly, the user space entity is expected
+ * to set the SAR power limits. Host drivers can retry this event to the
+ * user space for the SAR power limits configuration from user space. If
+ * the driver does not get the SAR power limits from user space for all
+ * the retried attempts, it can configure a default SAR power limit.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO: This acts as a vendor event and
+ * is used to update the information about the station from the driver to
+ * userspace. Uses attributes from enum
+ * qca_wlan_vendor_attr_update_sta_info.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON: This acts as an event.
+ * The host driver initiates the disconnection for scenarios such as beacon
+ * miss, NUD failure, peer kick out, etc. The disconnection indication
+ * through cfg80211_disconnected() expects the reason codes from enum
+ * ieee80211_reasoncode which does not signify these various reasons why
+ * the driver has triggered the disconnection. This event will be used to
+ * send the driver specific reason codes by the host driver to userspace.
+ * Host drivers should trigger this event and pass the respective reason
+ * code immediately prior to triggering cfg80211_disconnected(). The
+ * attributes used with this event are defined in enum
+ * qca_wlan_vendor_attr_driver_disconnect_reason.
*/
enum qca_nl80211_vendor_subcmds {
QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -549,7 +745,8 @@
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_SCALE = 109,
/* 110..114 - reserved for QCA */
QCA_NL80211_VENDOR_SUBCMD_SET_TXPOWER_DECR_DB = 115,
- /* 116..117 - reserved for QCA */
+ QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY = 116,
+ /* 117 - reserved for QCA */
QCA_NL80211_VENDOR_SUBCMD_SET_SAP_CONFIG = 118,
QCA_NL80211_VENDOR_SUBCMD_TSF = 119,
QCA_NL80211_VENDOR_SUBCMD_WISA = 120,
@@ -609,13 +806,35 @@
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169,
/* Frame filter operations for other BSSs/unassociated STAs */
QCA_NL80211_VENDOR_SUBCMD_BSS_FILTER = 170,
+ QCA_NL80211_VENDOR_SUBCMD_NAN_EXT = 171,
+ QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT = 172,
+ QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG = 173,
+ QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT = 174,
+ QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG = 175,
+ QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_AKMS = 176,
+ QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE = 177,
+ QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH = 178,
+ QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG = 179,
+ QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING = 180,
+ QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP = 181,
+ QCA_NL80211_VENDOR_SUBCMD_OEM_DATA = 182,
+ QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT = 183,
+ QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE = 184,
+ QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE = 185,
+ QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO = 186,
+ QCA_NL80211_VENDOR_SUBCMD_GET_SAR_LIMITS_EVENT = 187,
+ QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO = 188,
+ QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON = 189,
};
enum qca_wlan_vendor_attr {
QCA_WLAN_VENDOR_ATTR_INVALID = 0,
/* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */
QCA_WLAN_VENDOR_ATTR_DFS = 1,
- /* used by QCA_NL80211_VENDOR_SUBCMD_NAN */
+ /* Used only when driver sends vendor events to the userspace under the
+ * command QCA_NL80211_VENDOR_SUBCMD_NAN. Not used when userspace sends
+ * commands to the driver.
+ */
QCA_WLAN_VENDOR_ATTR_NAN = 2,
/* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
QCA_WLAN_VENDOR_ATTR_STATS_EXT = 3,
@@ -786,6 +1005,18 @@
* to report the corresponding antenna index to the chain RSSI value
*/
QCA_WLAN_VENDOR_ATTR_ANTENNA_INFO = 40,
+ /* Used in QCA_NL80211_VENDOR_SUBCMD_GET_CHAIN_RSSI command to report
+ * the specific antenna EVM value (unsigned 32 bit value). With a
+ * determinate group of antennas, the driver specifies the EVM value
+ * for each antenna ID, and application extract them in user space.
+ */
+ QCA_WLAN_VENDOR_ATTR_CHAIN_EVM = 41,
+ /*
+ * Used in QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE command to report
+ * wlan firmware current state. FW state is an unsigned 8 bit value,
+ * one of the values in enum qca_wlan_vendor_attr_fw_state.
+ */
+ QCA_WLAN_VENDOR_ATTR_FW_STATE = 42,
/* keep last */
QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
@@ -797,6 +1028,49 @@
QCA_ROAMING_ALLOWED_WITHIN_ESS,
};
+/**
+ * enum qca_roam_reason - Represents the reason codes for roaming. Used by
+ * QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REASON.
+ *
+ * @QCA_ROAM_REASON_UNKNOWN: Any reason that do not classify under the below
+ * reasons.
+ *
+ * @QCA_ROAM_REASON_PER: Roam triggered when packet error rates (PER) breached
+ * the configured threshold.
+ *
+ * @QCA_ROAM_REASON_BEACON_MISS: Roam triggered due to the continuous configured
+ * beacon misses from the then connected AP.
+ *
+ * @QCA_ROAM_REASON_POOR_RSSI: Roam triggered due to the poor RSSI reported
+ * by the connected AP.
+ *
+ * @QCA_ROAM_REASON_BETTER_RSSI: Roam triggered for finding a BSS with a better
+ * RSSI than the connected BSS. Here the RSSI of the current BSS is not poor.
+ *
+ * @QCA_ROAM_REASON_CONGESTION: Roam triggered considering the connected channel
+ * or environment being very noisy or congested.
+ *
+ * @QCA_ROAM_REASON_EXPLICIT_REQUEST: Roam triggered due to an explicit request
+ * from the user (user space).
+ *
+ * @QCA_ROAM_REASON_BTM: Roam triggered due to BTM Request frame received from
+ * the connected AP.
+ *
+ * @QCA_ROAM_REASON_BSS_LOAD: Roam triggered due to the channel utilization
+ * breaching out the configured threshold.
+ */
+enum qca_roam_reason {
+ QCA_ROAM_REASON_UNKNOWN,
+ QCA_ROAM_REASON_PER,
+ QCA_ROAM_REASON_BEACON_MISS,
+ QCA_ROAM_REASON_POOR_RSSI,
+ QCA_ROAM_REASON_BETTER_RSSI,
+ QCA_ROAM_REASON_CONGESTION,
+ QCA_ROAM_REASON_USER_TRIGGER,
+ QCA_ROAM_REASON_BTM,
+ QCA_ROAM_REASON_BSS_LOAD,
+};
+
enum qca_wlan_vendor_attr_roam_auth {
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID,
@@ -839,6 +1113,11 @@
* doing subsequent ERP based connections in the same realm.
*/
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_FILS_ERP_NEXT_SEQ_NUM = 13,
+ /* A 16-bit unsigned value representing the reasons for the roaming.
+ * Defined by enum qca_roam_reason.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REASON = 14,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX =
@@ -882,31 +1161,167 @@
QCA_WLAN_VENDOR_ATTR_P2P_LISTEN_OFFLOAD_AFTER_LAST - 1
};
+/**
+ * enum qca_wlan_vendor_attr_acs_offload - Defines attributes to be used with
+ * vendor command/event QCA_NL80211_VENDOR_SUBCMD_DO_ACS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL: Required (u8).
+ * Used with event to notify the primary channel number selected in ACS
+ * operation.
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL is deprecated; use
+ * QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY instead.
+ * To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL
+ * is still used if either of the driver or user space application doesn't
+ * support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL: Required (u8).
+ * Used with event to notify the secondary channel number selected in ACS
+ * operation.
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL is deprecated; use
+ * QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY instead.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL is still used if either of
+ * the driver or user space application doesn't support 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE: Required (u8).
+ * (a) Used with command to configure hw_mode from
+ * enum qca_wlan_vendor_acs_hw_mode for ACS operation.
+ * (b) Also used with event to notify the hw_mode of selected primary channel
+ * in ACS operation.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED: Flag attribute.
+ * Used with command to configure ACS operation for HT mode.
+ * Disable (flag attribute not present) - HT disabled and
+ * Enable (flag attribute present) - HT enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED: Flag attribute.
+ * Used with command to configure ACS operation for HT40 mode.
+ * Disable (flag attribute not present) - HT40 disabled and
+ * Enable (flag attribute present) - HT40 enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED: Flag attribute.
+ * Used with command to configure ACS operation for VHT mode.
+ * Disable (flag attribute not present) - VHT disabled and
+ * Enable (flag attribute present) - VHT enabled.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH: Optional (u16) with command and
+ * mandatory with event.
+ * If specified in command path, ACS operation is configured with the given
+ * channel width (in MHz).
+ * In event path, specifies the channel width of the primary channel selected.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST: Required and type is NLA_UNSPEC.
+ * Used with command to configure channel list using an array of
+ * channel numbers (u8).
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * the driver mandates use of QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST whereas
+ * QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST is optional.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL: Required (u8).
+ * Used with event to notify the VHT segment 0 center channel number selected in
+ * ACS operation. The value is the index of the channel center frequency for
+ * 20 MHz, 40 MHz, and 80 MHz channels. The value is the center frequency index
+ * of the primary 80 MHz segment for 160 MHz and 80+80 MHz channels.
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL is deprecated; use
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY instead.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL is still used if either of
+ * the driver or user space application doesn't support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL: Required (u8).
+ * Used with event to notify the VHT segment 1 center channel number selected in
+ * ACS operation. The value is zero for 20 MHz, 40 MHz, and 80 MHz channels.
+ * The value is the index of the channel center frequency for 160 MHz channels
+ * and the center frequency index of the secondary 80 MHz segment for 80+80 MHz
+ * channels.
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL is deprecated; use
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY instead.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL is still used if either of
+ * the driver or user space application doesn't support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST: Required and type is NLA_UNSPEC.
+ * Used with command to configure the channel list using an array of channel
+ * center frequencies in MHz (u32).
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * the driver first parses the frequency list and if it fails to get a frequency
+ * list, parses the channel list specified using
+ * QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST (considers only 2 GHz and 5 GHz channels in
+ * QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST).
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY: Required (u32).
+ * Used with event to notify the primary channel center frequency (MHz) selected
+ * in ACS operation.
+ * Note: If the driver supports the 6 GHz band, the event sent from the driver
+ * includes this attribute along with QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY: Required (u32).
+ * Used with event to notify the secondary channel center frequency (MHz)
+ * selected in ACS operation.
+ * Note: If the driver supports the 6 GHz band, the event sent from the driver
+ * includes this attribute along with
+ * QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY: Required (u32).
+ * Used with event to notify the VHT segment 0 center channel frequency (MHz)
+ * selected in ACS operation.
+ * Note: If the driver supports the 6 GHz band, the event sent from the driver
+ * includes this attribute along with
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY: Required (u32).
+ * Used with event to notify the VHT segment 1 center channel frequency (MHz)
+ * selected in ACS operation.
+ * Note: If the driver supports the 6 GHz band, the event sent from the driver
+ * includes this attribute along with
+ * QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL.
+ */
enum qca_wlan_vendor_attr_acs_offload {
QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
- QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL,
- QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL,
- QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE,
- QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED,
- QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED,
- QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED,
- QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH,
- QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST,
- QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL,
- QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL,
- QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST,
+ QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL = 1,
+ QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL = 2,
+ QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE = 3,
+ QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED = 4,
+ QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED = 5,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED = 6,
+ QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH = 7,
+ QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST = 8,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL = 9,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL = 10,
+ QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST = 11,
+ QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY = 12,
+ QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY = 13,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_FREQUENCY = 14,
+ QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_FREQUENCY = 15,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_ACS_MAX =
QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1
};
+/**
+ * enum qca_wlan_vendor_acs_hw_mode - Defines HW mode to be used with the
+ * vendor command/event QCA_NL80211_VENDOR_SUBCMD_DO_ACS.
+ *
+ * @QCA_ACS_MODE_IEEE80211B: 802.11b mode
+ * @QCA_ACS_MODE_IEEE80211G: 802.11g mode
+ * @QCA_ACS_MODE_IEEE80211A: 802.11a mode
+ * @QCA_ACS_MODE_IEEE80211AD: 802.11ad mode
+ * @QCA_ACS_MODE_IEEE80211ANY: all modes
+ * @QCA_ACS_MODE_IEEE80211AX: 802.11ax mode
+ */
enum qca_wlan_vendor_acs_hw_mode {
QCA_ACS_MODE_IEEE80211B,
QCA_ACS_MODE_IEEE80211G,
QCA_ACS_MODE_IEEE80211A,
QCA_ACS_MODE_IEEE80211AD,
QCA_ACS_MODE_IEEE80211ANY,
+ QCA_ACS_MODE_IEEE80211AX,
};
/**
@@ -937,6 +1352,14 @@
* only OCE STA-CFON functionalities.
* @QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY: Device supports self
* managed regulatory.
+ * @QCA_WLAN_VENDOR_FEATURE_TWT: Device supports TWT (Target Wake Time).
+ * @QCA_WLAN_VENDOR_FEATURE_11AX: Device supports 802.11ax (HE)
+ * @QCA_WLAN_VENDOR_FEATURE_6GHZ_SUPPORT: Device supports 6 GHz band operation
+ * @QCA_WLAN_VENDOR_FEATURE_THERMAL_CONFIG: Device is capable of receiving
+ * and applying thermal configuration through
+ * %QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL and
+ * %QCA_WLAN_VENDOR_ATTR_THERMAL_COMPLETION_WINDOW attributes from
+ * userspace.
* @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
*/
enum qca_wlan_vendor_features {
@@ -948,6 +1371,10 @@
QCA_WLAN_VENDOR_FEATURE_OCE_AP = 5,
QCA_WLAN_VENDOR_FEATURE_OCE_STA_CFON = 6,
QCA_WLAN_VENDOR_FEATURE_SELF_MANAGED_REGULATORY = 7,
+ QCA_WLAN_VENDOR_FEATURE_TWT = 8,
+ QCA_WLAN_VENDOR_FEATURE_11AX = 9,
+ QCA_WLAN_VENDOR_FEATURE_6GHZ_SUPPORT = 10,
+ QCA_WLAN_VENDOR_FEATURE_THERMAL_CONFIG = 11,
NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
};
@@ -1289,6 +1716,9 @@
* randomisation
* @QCA_WLAN_VENDOR_ATTR_SCAN_BSSID: 6-byte MAC address representing the
* specific BSSID to scan for.
+ * @QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME: Unsigned 64-bit dwell time in
+ * microseconds. This is a common value which applies across all
+ * frequencies specified by QCA_WLAN_VENDOR_ATTR_SCAN_FREQUENCIES.
*/
enum qca_wlan_vendor_attr_scan {
QCA_WLAN_VENDOR_ATTR_SCAN_INVALID_PARAM = 0,
@@ -1303,6 +1733,7 @@
QCA_WLAN_VENDOR_ATTR_SCAN_MAC = 9,
QCA_WLAN_VENDOR_ATTR_SCAN_MAC_MASK = 10,
QCA_WLAN_VENDOR_ATTR_SCAN_BSSID = 11,
+ QCA_WLAN_VENDOR_ATTR_SCAN_DWELL_TIME = 12,
QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SCAN_MAX =
QCA_WLAN_VENDOR_ATTR_SCAN_AFTER_LAST - 1
@@ -1640,18 +2071,77 @@
*/
QCA_WLAN_VENDOR_ATTR_CONFIG_GTX = 57,
+ /* Attribute to configure disconnect IEs to the driver.
+ * This carries an array of unsigned 8-bit characters.
+ *
+ * If this is configured, driver shall fill the IEs in disassoc/deauth
+ * frame.
+ * These IEs are expected to be considered only for the next
+ * immediate disconnection (disassoc/deauth frame) originated by
+ * the DUT, irrespective of the entity (user space/driver/firmware)
+ * triggering the disconnection.
+ * The host drivers are not expected to use the IEs set through
+ * this interface for further disconnections after the first immediate
+ * disconnection initiated post the configuration.
+ * If the IEs are also updated through cfg80211 interface (after the
+ * enhancement to cfg80211_disconnect), host driver is expected to
+ * take the union of IEs from both of these interfaces and send in
+ * further disassoc/deauth frames.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_DISCONNECT_IES = 58,
+
+ /* 8-bit unsigned value for ELNA bypass.
+ * 1-Enable, 0-Disable
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ELNA_BYPASS = 59,
+
+ /* 8-bit unsigned value. This attribute enables/disables the host driver
+ * to send the Beacon Report Response with failure reason for the
+ * scenarios where STA cannot honor the Beacon Report Request from AP.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_REPORT_FAIL = 60,
+
+ /* 8-bit unsigned value. This attribute enables/disables the host driver
+ * to send roam reason information in the Reassociation Request frame to
+ * the target AP when roaming within the same ESS.
+ * 1-Enable, 0-Disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_CONFIG_ROAM_REASON = 61,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST - 1,
};
+/* Compatibility defines for previously used incorrect enum
+ * qca_wlan_vendor_attr_config names. These values should not be used in any
+ * new implementation. */
+#define QCA_WLAN_VENDOR_ATTR_DISCONNECT_IES \
+ QCA_WLAN_VENDOR_ATTR_CONFIG_DISCONNECT_IES
+#define QCA_WLAN_VENDOR_ATTR_BEACON_REPORT_FAIL \
+ QCA_WLAN_VENDOR_ATTR_CONFIG_BEACON_REPORT_FAIL
+
/**
* enum qca_wlan_vendor_attr_sap_config - Parameters for AP configuration
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL: Optional (u8)
+ * Channel number on which Access Point should restart.
+ * Note: If both the driver and user space application supports the 6 GHz band,
+ * this attribute is deprecated and QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY
+ * should be used.
+ * To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL
+ * is still used if either of the driver or user space application doesn't
+ * support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY: Optional (u32)
+ * Channel center frequency (MHz) on which the access point should restart.
*/
enum qca_wlan_vendor_attr_sap_config {
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_INVALID = 0,
- /* 1 - reserved for QCA */
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_CHANNEL = 1,
+
/* List of frequencies on which AP is expected to operate.
* This is irrespective of ACS configuration. This list is a priority
* based one and is looked for before the AP is created to ensure the
@@ -1659,6 +2149,7 @@
* the system.
*/
QCA_WLAN_VENDOR_ATTR_SAP_MANDATORY_FREQUENCY_LIST = 2,
+ QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_FREQUENCY = 3,
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SAP_CONFIG_MAX =
@@ -1738,6 +2229,54 @@
};
/**
+ * enum qca_acs_dfs_mode - Defines different types of DFS channel
+ * configurations for ACS operation.
+ *
+ * @QCA_ACS_DFS_MODE_NONE: Refer to invalid DFS mode
+ * @QCA_ACS_DFS_MODE_ENABLE: Consider DFS channels in ACS operation
+ * @QCA_ACS_DFS_MODE_DISABLE: Do not consider DFS channels in ACS operation
+ * @QCA_ACS_DFS_MODE_DEPRIORITIZE: Deprioritize DFS channels in ACS operation
+ */
+enum qca_acs_dfs_mode {
+ QCA_ACS_DFS_MODE_NONE = 0,
+ QCA_ACS_DFS_MODE_ENABLE = 1,
+ QCA_ACS_DFS_MODE_DISABLE = 2,
+ QCA_ACS_DFS_MODE_DEPRIORITIZE = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_acs_config - Defines Configuration attributes
+ * used by the vendor command QCA_NL80211_VENDOR_SUBCMD_ACS_POLICY.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE: Required (u8)
+ * DFS mode for ACS operation from enum qca_acs_dfs_mode.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT: Required (u8)
+ * channel number hint for ACS operation, if valid channel is specified then
+ * ACS operation gives priority to this channel.
+ * Note: If both the driver and user space application supports the 6 GHz band,
+ * this attribute is deprecated and QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT
+ * should be used.
+ * To maintain backward compatibility, QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT
+ * is still used if either of the driver or user space application doesn't
+ * support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT: Required (u32).
+ * Channel center frequency (MHz) hint for ACS operation, if a valid center
+ * frequency is specified, ACS operation gives priority to this channel.
+ */
+enum qca_wlan_vendor_attr_acs_config {
+ QCA_WLAN_VENDOR_ATTR_ACS_MODE_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_MODE = 1,
+ QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_HINT = 2,
+ QCA_WLAN_VENDOR_ATTR_ACS_FREQUENCY_HINT = 3,
+
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_MAX =
+ QCA_WLAN_VENDOR_ATTR_ACS_DFS_AFTER_LAST - 1,
+};
+
+/**
* enum qca_wlan_vendor_attr_get_hw_capability - Wi-Fi hardware capability
*/
enum qca_wlan_vendor_attr_get_hw_capability {
@@ -2381,6 +2920,18 @@
};
/**
+ * enum qca_wlan_vendor_attr_fw_state - State of firmware
+ *
+ * @QCA_WLAN_VENDOR_ATTR_FW_STATE_ERROR: FW is in bad state
+ * @QCA_WLAN_VENDOR_ATTR_FW_STATE_ACTIVE: FW is active
+ */
+enum qca_wlan_vendor_attr_fw_state {
+ QCA_WLAN_VENDOR_ATTR_FW_STATE_ERROR,
+ QCA_WLAN_VENDOR_ATTR_FW_STATE_ACTIVE,
+ QCA_WLAN_VENDOR_ATTR_FW_STATE_MAX
+};
+
+/**
* BRP antenna limit mode
*
* @QCA_WLAN_VENDOR_ATTR_BRP_ANT_LIMIT_MODE_DISABLE: Disable BRP force
@@ -3044,11 +3595,28 @@
/**
* enum qca_wlan_vendor_attr_get_wifi_info: Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO sub command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION: In a request this attribute
+ * should be set to any U8 value to indicate that the driver version
+ * should be returned. When enabled in this manner, in a response this
+ * attribute will contain a string representation of the driver version.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION: In a request this attribute
+ * should be set to any U8 value to indicate that the firmware version
+ * should be returned. When enabled in this manner, in a response this
+ * attribute will contain a string representation of the firmware version.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX: In a request this attribute
+ * should be set to any U32 value to indicate that the current radio
+ * index should be returned. When enabled in this manner, in a response
+ * this attribute will contain a U32 radio index value.
+ *
*/
enum qca_wlan_vendor_attr_get_wifi_info {
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_INVALID = 0,
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_DRIVER_VERSION = 1,
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_FIRMWARE_VERSION = 2,
+ QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX = 3,
/* keep last */
QCA_WLAN_VENDOR_ATTR_WIFI_INFO_GET_AFTER_LAST,
@@ -3091,6 +3659,345 @@
QCA_WLAN_VENDOR_ATTR_LOGGER_RESULTS_AFTER_LAST - 1,
};
+/**
+ * enum qca_scan_freq_list_type: Frequency list types
+ *
+ * @QCA_PREFERRED_SCAN_FREQ_LIST: The driver shall use the scan frequency list
+ * specified with attribute QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST as
+ * a preferred frequency list for roaming.
+ *
+ * @QCA_SPECIFIC_SCAN_FREQ_LIST: The driver shall use the frequency list
+ * specified with attribute QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST as
+ * a specific frequency list for roaming.
+ */
+enum qca_scan_freq_list_type {
+ QCA_PREFERRED_SCAN_FREQ_LIST = 1,
+ QCA_SPECIFIC_SCAN_FREQ_LIST = 2,
+};
+
+/**
+ * enum qca_vendor_attr_scan_freq_list_scheme: Frequency list scheme
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST: Nested attribute of u32 values
+ * List of frequencies in MHz to be considered for a roam scan.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_TYPE: Unsigned 32-bit value.
+ * Type of frequency list scheme being configured/gotten as defined by the
+ * enum qca_scan_freq_list_type.
+ */
+enum qca_vendor_attr_scan_freq_list_scheme {
+ QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST = 1,
+ QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_TYPE = 2,
+
+ /* keep last */
+ QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_AFTER_LAST,
+ QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_MAX =
+ QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST_SCHEME_AFTER_LAST - 1,
+};
+
+/*
+ * enum qca_vendor_roam_triggers: Bitmap of roaming triggers
+ *
+ * @QCA_ROAM_TRIGGER_REASON_PER: Set if the roam has to be triggered based on
+ * a bad packet error rates (PER).
+ * @QCA_ROAM_TRIGGER_REASON_BEACON_MISS: Set if the roam has to be triggered
+ * based on beacon misses from the connected AP.
+ * @QCA_ROAM_TRIGGER_REASON_POOR_RSSI: Set if the roam has to be triggered
+ * due to poor RSSI of the connected AP.
+ * @QCA_ROAM_TRIGGER_REASON_BETTER_RSSI: Set if the roam has to be triggered
+ * upon finding a BSSID with a better RSSI than the connected BSSID.
+ * Here the RSSI of the current BSSID need not be poor.
+ * @QCA_ROAM_TRIGGER_REASON_PERIODIC: Set if the roam has to be triggered
+ * by triggering a periodic scan to find a better AP to roam.
+ * @QCA_ROAM_TRIGGER_REASON_DENSE: Set if the roam has to be triggered
+ * when the connected channel environment is too noisy/congested.
+ * @QCA_ROAM_TRIGGER_REASON_BTM: Set if the roam has to be triggered
+ * when BTM Request frame is received from the connected AP.
+ * @QCA_ROAM_TRIGGER_REASON_BSS_LOAD: Set if the roam has to be triggered
+ * when the channel utilization is goes above the configured threshold.
+ *
+ * Set the corresponding roam trigger reason bit to consider it for roam
+ * trigger.
+ * Userspace can set multiple bits and send to the driver. The driver shall
+ * consider all of them to trigger/initiate a roam scan.
+ */
+enum qca_vendor_roam_triggers {
+ QCA_ROAM_TRIGGER_REASON_PER = 1 << 0,
+ QCA_ROAM_TRIGGER_REASON_BEACON_MISS = 1 << 1,
+ QCA_ROAM_TRIGGER_REASON_POOR_RSSI = 1 << 2,
+ QCA_ROAM_TRIGGER_REASON_BETTER_RSSI = 1 << 3,
+ QCA_ROAM_TRIGGER_REASON_PERIODIC = 1 << 4,
+ QCA_ROAM_TRIGGER_REASON_DENSE = 1 << 5,
+ QCA_ROAM_TRIGGER_REASON_BTM = 1 << 6,
+ QCA_ROAM_TRIGGER_REASON_BSS_LOAD = 1 << 7,
+};
+
+/**
+ * enum qca_vendor_attr_roam_candidate_selection_criteria:
+ *
+ * Each attribute carries a weightage in percentage (%).
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_RSSI: Unsigned 8-bit value.
+ * Represents the weightage to be given for the RSSI selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE: Unsigned 8-bit value.
+ * Represents the weightage to be given for the rate selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BW: Unsigned 8-bit value.
+ * Represents the weightage to be given for the band width selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BAND: Unsigned 8-bit value.
+ * Represents the weightage to be given for the band selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_NSS: Unsigned 8-bit value.
+ * Represents the weightage to be given for the NSS selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_CHAN_CONGESTION: Unsigned 8-bit value.
+ * Represents the weightage to be given for the channel congestion
+ * selection criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BEAMFORMING: Unsigned 8-bit value.
+ * Represents the weightage to be given for the beamforming selection
+ * criteria among other parameters.
+ *
+ * @QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_OCE_WAN: Unsigned 8-bit value.
+ * Represents the weightage to be given for the OCE selection
+ * criteria among other parameters.
+ */
+enum qca_vendor_attr_roam_candidate_selection_criteria {
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_RSSI = 1,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE = 2,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BW = 3,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BAND = 4,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_NSS = 5,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_CHAN_CONGESTION = 6,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_BEAMFORMING = 7,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_OCE_WAN = 8,
+
+ /* keep last */
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_AFTER_LAST,
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_MAX =
+ QCA_ATTR_ROAM_CAND_SEL_CRITERIA_RATE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_vendor_attr_roam_control - Attributes to carry roam configuration
+ * The following attributes are used to set/get/clear the respective
+ * configurations to/from the driver.
+ * For the get, the attribute for the configuration to be queried shall
+ * carry any of its acceptable values to the driver. In return, the driver
+ * shall send the configured values within the same attribute to the user
+ * space.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_ENABLE: Unsigned 8-bit value.
+ * Signifies to enable/disable roam control in driver.
+ * 1-enable, 0-disable
+ * Enable: Mandates the driver to do the further roams using the
+ * configuration parameters set through
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET.
+ * Disable: Disables the driver/firmware roaming triggered through
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET. Further roaming is
+ * expected to continue with the default configurations.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_STATUS: Unsigned 8-bit value.
+ * This is used along with QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET.
+ * Roam control status is obtained through this attribute.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_CLEAR_ALL: Flag attribute to indicate the
+ * complete config set through QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET
+ * is to be cleared in the driver.
+ * This is used along with QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR
+ * and shall be ignored if used with other sub commands.
+ * If this attribute is specified along with subcmd
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR, the driver shall ignore
+ * all other attributes, if there are any.
+ * If this attribute is not specified when the subcmd
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR is sent, the driver shall
+ * clear the data corresponding to the attributes specified.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_FREQ_LIST_SCHEME: Nested attribute to carry the
+ * list of frequencies and its type, represented by
+ * enum qca_vendor_attr_scan_freq_list_scheme.
+ * Frequency list and its type are mandatory for this attribute to set
+ * the frequencies.
+ * Frequency type is mandatory for this attribute to get the frequencies
+ * and the frequency list is obtained through
+ * QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST.
+ * Frequency list type is mandatory for this attribute to clear the
+ * frequencies.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SCAN_PERIOD: Unsigned 32-bit value.
+ * Carries the value of scan period in seconds to set.
+ * The value of scan period is obtained with the same attribute for get.
+ * Clears the scan period in the driver when specified with clear command.
+ * Scan period is the idle time in seconds between each subsequent
+ * channel scans.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD: Unsigned 32-bit value.
+ * Carries the value of full scan period in seconds to set.
+ * The value of full scan period is obtained with the same attribute for
+ * get.
+ * Clears the full scan period in the driver when specified with clear
+ * command. Full scan period is the idle period in seconds between two
+ * successive full channel roam scans.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_TRIGGERS: Unsigned 32-bit value.
+ * Carries a bitmap of the roam triggers specified in
+ * enum qca_vendor_roam_triggers.
+ * The driver shall enable roaming by enabling corresponding roam triggers
+ * based on the trigger bits sent with this attribute.
+ * If this attribute is not configured, the driver shall proceed with
+ * default behavior.
+ * The bitmap configured is obtained with the same attribute for get.
+ * Clears the bitmap configured in driver when specified with clear
+ * command.
+ *
+ * @QCA_ATTR_ROAM_CONTROL_SELECTION_CRITERIA: Nested attribute signifying the
+ * weightage in percentage (%) to be given for each selection criteria.
+ * Different roam candidate selection criteria are represented by
+ * enum qca_vendor_attr_roam_candidate_selection_criteria.
+ * The driver shall select the roam candidate based on corresponding
+ * candidate selection scores sent.
+ *
+ * An empty nested attribute is used to indicate that no specific
+ * preference score/criteria is configured (i.e., to disable this mechanism
+ * in the set case and to show that the mechanism is disabled in the get
+ * case).
+ *
+ * Userspace can send multiple attributes out of this enum to the driver.
+ * Since this attribute represents the weight/percentage of preference for
+ * the respective selection criteria, it is preferred to configure 100%
+ * total weightage. The value in each attribute or cumulative weight of the
+ * values in all the nested attributes should not exceed 100%. The driver
+ * shall reject such configuration.
+ *
+ * If the weights configured through this attribute are less than 100%,
+ * the driver shall honor the weights (x%) passed for the corresponding
+ * selection criteria and choose/distribute rest of the weight (100-x)%
+ * for the other selection criteria, based on its internal logic.
+ *
+ * The selection criteria configured is obtained with the same
+ * attribute for get.
+ *
+ * Clears the selection criteria configured in the driver when specified
+ * with clear command.
+ */
+enum qca_vendor_attr_roam_control {
+ QCA_ATTR_ROAM_CONTROL_ENABLE = 1,
+ QCA_ATTR_ROAM_CONTROL_STATUS = 2,
+ QCA_ATTR_ROAM_CONTROL_CLEAR_ALL = 3,
+ QCA_ATTR_ROAM_CONTROL_FREQ_LIST_SCHEME= 4,
+ QCA_ATTR_ROAM_CONTROL_SCAN_PERIOD = 5,
+ QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD = 6,
+ QCA_ATTR_ROAM_CONTROL_TRIGGERS = 7,
+ QCA_ATTR_ROAM_CONTROL_SELECTION_CRITERIA = 8,
+
+ /* keep last */
+ QCA_ATTR_ROAM_CONTROL_AFTER_LAST,
+ QCA_ATTR_ROAM_CONTROL_MAX =
+ QCA_ATTR_ROAM_CONTROL_AFTER_LAST - 1,
+};
+
+/*
+ * enum qca_wlan_vendor_attr_roaming_config_params: Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_ROAM sub command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD: Unsigned 32-bit value.
+ * Represents the different roam sub commands referred by
+ * enum qca_wlan_vendor_roaming_subcmd.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID: Unsigned 32-bit value.
+ * Represents the Request ID for the specific set of commands.
+ * This also helps to map specific set of commands to the respective
+ * ID / client. e.g., helps to identify the user entity configuring the
+ * Blacklist BSSID and accordingly clear the respective ones with the
+ * matching ID.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS: Unsigned
+ * 32-bit value.Represents the number of whitelist SSIDs configured.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST: Nested attribute
+ * to carry the list of Whitelist SSIDs.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID: SSID (binary attribute,
+ * 0..32 octets). Represents the white list SSID. Whitelist SSIDs
+ * represent the list of SSIDs to which the firmware/driver can consider
+ * to roam to.
+ *
+ * The following PARAM_A_BAND_XX attributes are applied to 5GHz BSSIDs when
+ * comparing with a 2.4GHz BSSID. They are not applied when comparing two
+ * 5GHz BSSIDs.The following attributes are set through the Roaming SUBCMD -
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_THRESHOLD: Signed 32-bit
+ * value, RSSI threshold above which 5GHz RSSI is favored.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_THRESHOLD: Signed 32-bit
+ * value, RSSI threshold below which 5GHz RSSI is penalized.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_BOOST_FACTOR: Unsigned 32-bit
+ * value, factor by which 5GHz RSSI is boosted.
+ * boost=(RSSI_measured-5GHz_boost_threshold)*5GHz_boost_factor
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_PENALTY_FACTOR: Unsigned 32-bit
+ * value, factor by which 5GHz RSSI is penalized.
+ * penalty=(5GHz_penalty_threshold-RSSI_measured)*5GHz_penalty_factor
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_A_BAND_MAX_BOOST: Unsigned 32-bit
+ * value, maximum boost that can be applied to a 5GHz RSSI.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_LAZY_ROAM_HISTERESYS: Unsigned 32-bit
+ * value, boost applied to current BSSID to ensure the currently
+ * associated BSSID is favored so as to prevent ping-pong situations.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALERT_ROAM_RSSI_TRIGGER: Signed 32-bit
+ * value, RSSI below which "Alert" roam is enabled.
+ * "Alert" mode roaming - firmware is "urgently" hunting for another BSSID
+ * because the RSSI is low, or because many successive beacons have been
+ * lost or other bad link conditions.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE: Unsigned 32-bit
+ * value. 1-Enable, 0-Disable. Represents "Lazy" mode, where
+ * firmware is hunting for a better BSSID or white listed SSID even though
+ * the RSSI of the link is good. The parameters enabling the roaming are
+ * configured through the PARAM_A_BAND_XX attrbutes.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS: Nested attribute,
+ * represents the BSSIDs preferred over others while evaluating them
+ * for the roaming.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_NUM_BSSID: Unsigned
+ * 32-bit value. Represents the number of preferred BSSIDs set.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_BSSID: 6-byte MAC
+ * address representing the BSSID to be preferred.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_RSSI_MODIFIER: Signed
+ * 32-bit value, representing the modifier to be applied to the RSSI of
+ * the BSSID for the purpose of comparing it with other roam candidate.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS: Nested attribute,
+ * represents the BSSIDs to get blacklisted for roaming.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID: Unsigned
+ * 32-bit value, represents the number of blacklisted BSSIDs.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID: 6-byte MAC
+ * address representing the Blacklisted BSSID.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_HINT: Flag attribute,
+ * indicates this BSSID blacklist as a hint to the driver. The driver can
+ * select this BSSID in the worst case (when no other BSSIDs are better).
+ *
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL: Nested attribute to
+ * set/get/clear the roam control config as
+ * defined @enum qca_vendor_attr_roam_control.
+ */
enum qca_wlan_vendor_attr_roaming_config_params {
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_INVALID = 0,
@@ -3124,6 +4031,10 @@
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS = 18,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID = 19,
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_BSSID = 20,
+ /* Flag attribute indicates this BSSID blacklist as a hint */
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_HINT = 21,
+
+ QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL = 22,
/* keep last */
QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_AFTER_LAST,
@@ -3132,22 +4043,63 @@
};
/*
- * enum qca_wlan_vendor_attr_roam_subcmd: Attributes for data used by
- * QCA_NL80211_VENDOR_SUBCMD_ROAM sub command.
+ * enum qca_wlan_vendor_roaming_subcmd: Referred by
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_WHITE_LIST: Sub command to
+ * configure the white list SSIDs. These are configured through
+ * the following attributes.
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS,
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST,
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS: Sub command to
+ * configure the Roam params. These parameters are evaluated on the GScan
+ * results. Refers the attributes PARAM_A_BAND_XX above to configure the
+ * params.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_LAZY_ROAM: Sets the Lazy roam. Uses
+ * the attribute QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE
+ * to enable/disable Lazy roam.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PREFS: Sets the BSSID
+ * preference. Contains the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PREFS to set the BSSID
+ * preference.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID: Sets the Blacklist
+ * BSSIDs. Refers QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS to
+ * set the same.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET: Command to set the
+ * roam control config to the driver with the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET: Command to obtain the
+ * roam control config from driver with the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL.
+ * For the get, the attribute for the configuration to be queried shall
+ * carry any of its acceptable value to the driver. In return, the driver
+ * shall send the configured values within the same attribute to the user
+ * space.
+ *
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR: Command to clear the
+ * roam control config in the driver with the attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_CONTROL.
+ * The driver shall continue with its default roaming behavior when data
+ * corresponding to an attribute is cleared.
*/
-enum qca_wlan_vendor_attr_roam_subcmd {
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_INVALID = 0,
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST = 1,
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_GSCAN_ROAM_PARAMS = 2,
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_LAZY_ROAM = 3,
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PREFS = 4,
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BSSID_PARAMS = 5,
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID = 6,
-
- /* keep last */
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST,
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_MAX =
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_AFTER_LAST - 1,
+enum qca_wlan_vendor_roaming_subcmd {
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_INVALID = 0,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_WHITE_LIST = 1,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS = 2,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_LAZY_ROAM = 3,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PREFS = 4,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BSSID_PARAMS = 5,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID = 6,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET = 7,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET = 8,
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_CLEAR = 9,
};
enum qca_wlan_vendor_attr_gscan_config_params {
@@ -3513,8 +4465,13 @@
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_BUCKETS_SCANNED = 45,
- /* Unsigned 32bit value; a GSCAN Capabilities attribute. */
- QCA_WLAN_VENDOR_ATTR_CAPABILITIES_MAX_NUM_BLACKLISTED_BSSID = 46,
+ /* Unsigned 32-bit value; a GSCAN Capabilities attribute.
+ * This is used to limit the maximum number of BSSIDs while sending
+ * the vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM with subcmd
+ * QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID and attribute
+ * QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_BSSID_PARAMS_NUM_BSSID.
+ */
+ QCA_WLAN_VENDOR_ATTR_GSCAN_MAX_NUM_BLACKLISTED_BSSID = 46,
/* keep last */
QCA_WLAN_VENDOR_ATTR_GSCAN_RESULTS_AFTER_LAST,
@@ -3613,6 +4570,44 @@
QCA_WLAN_VENDOR_ACS_SELECT_REASON_DFS,
/* Represents the reason that LTE co-exist in the current band. */
QCA_WLAN_VENDOR_ACS_SELECT_REASON_LTE_COEX,
+ /* Represents the reason that generic, uncategorized interference has
+ * been found in the current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_GENERIC_INTERFERENCE,
+ /* Represents the reason that excessive 802.11 interference has been
+ * found in the current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_80211_INTERFERENCE,
+ /* Represents the reason that generic Continuous Wave (CW) interference
+ * has been found in the current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_CW_INTERFERENCE,
+ /* Represents the reason that Microwave Oven (MWO) interference has been
+ * found in the current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_MWO_INTERFERENCE,
+ /* Represents the reason that generic Frequency-Hopping Spread Spectrum
+ * (FHSS) interference has been found in the current channel. This may
+ * include 802.11 waveforms.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_FHSS_INTERFERENCE,
+ /* Represents the reason that non-802.11 generic Frequency-Hopping
+ * Spread Spectrum (FHSS) interference has been found in the current
+ * channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_NON_80211_FHSS_INTERFERENCE,
+ /* Represents the reason that generic Wideband (WB) interference has
+ * been found in the current channel. This may include 802.11 waveforms.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_WB_INTERFERENCE,
+ /* Represents the reason that non-802.11 generic Wideband (WB)
+ * interference has been found in the current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_NON_80211_WB_INTERFERENCE,
+ /* Represents the reason that Jammer interference has been found in the
+ * current channel.
+ */
+ QCA_WLAN_VENDOR_ACS_SELECT_REASON_JAMMER_INTERFERENCE,
};
/**
@@ -3780,6 +4775,46 @@
*/
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FLAGS_2 = 11,
+ /*
+ * VHT segment 0 in MHz (u32) and the attribute is mandatory.
+ * Note: Event QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS includes
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
+ * along with
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0.
+ *
+ * If both the driver and user-space application supports the 6 GHz
+ * band, QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_0
+ * is deprecated and
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
+ * should be used.
+ *
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0
+ * is still used if either of the driver or user space application
+ * doesn't support the 6 GHz band.
+ */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_0 = 12,
+
+ /*
+ * VHT segment 1 in MHz (u32) and the attribute is mandatory.
+ * Note: Event QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS includes
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
+ * along with
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1.
+ *
+ * If both the driver and user-space application supports the 6 GHz
+ * band, QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_VHT_SEG_1
+ * is deprecated and
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
+ * should be considered.
+ *
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1
+ * is still used if either of the driver or user space application
+ * doesn't support the 6 GHz band.
+ */
+ QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_FREQ_VHT_SEG_1 = 13,
+
/* keep last */
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_LAST,
QCA_WLAN_VENDOR_EXTERNAL_ACS_EVENT_CHAN_INFO_ATTR_MAX =
@@ -3880,9 +4915,100 @@
};
/**
- * qca_wlan_vendor_attr_external_acs_channels: Attributes to vendor subcmd
+ * enum qca_wlan_vendor_attr_external_acs_channels: Attributes to vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_EXTERNAL_ACS. This carries a list of channels
* in priority order as decided after ACS operation in userspace.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_REASON: Required (u8).
+ * One of reason code from enum qca_wlan_vendor_acs_select_reason.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST: Required
+ * Array of nested values for each channel with following attributes:
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST is deprecated and use
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LIST
+ * is still used if either of the driver or user space application doesn't
+ * support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY: Required (u8).
+ * Primary channel number
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY is deprecated and use
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_PRIMARY
+ * is still used if either of the driver or user space application doesn't
+ * support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY: Required (u8).
+ * Secondary channel number, required only for 160 and 80+80 MHz bandwidths.
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY is deprecated and use
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_SECONDARY
+ * is still used if either of the driver or user space application
+ * doesn't support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0: Required (u8).
+ * VHT seg0 channel number
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0 is deprecated and use
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG0
+ * is still used if either of the driver or user space application
+ * doesn't support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1: Required (u8).
+ * VHT seg1 channel number
+ * Note: If both the driver and user-space application supports the 6 GHz band,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1 is deprecated and use
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1.
+ * To maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_CENTER_SEG1
+ * is still used if either of the driver or user space application
+ * doesn't support the 6 GHz band.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH: Required (u8).
+ * Takes one of enum nl80211_chan_width values.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST: Required
+ * Array of nested values for each channel with following attributes:
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY in MHz (u32),
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY in MHz (u32),
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0 in MHz (u32),
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1 in MHz (u32),
+ * QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH
+ * Note: If user-space application has no support of the 6 GHz band, this
+ * attribute is optional.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY: Required (u32)
+ * Primary channel frequency in MHz
+ * Note: If user-space application has no support of the 6 GHz band, this
+ * attribute is optional.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY: Required (u32)
+ * Secondary channel frequency in MHz used for HT 40 MHz channels.
+ * Note: If user-space application has no support of the 6 GHz band, this
+ * attribute is optional.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0: Required (u32)
+ * VHT seg0 channel frequency in MHz
+ * Note: If user-space application has no support of the 6GHz band, this
+ * attribute is optional.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1: Required (u32)
+ * VHT seg1 channel frequency in MHz
+ * Note: If user-space application has no support of the 6 GHz band, this
+ * attribute is optional.
*/
enum qca_wlan_vendor_attr_external_acs_channels {
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_INVALID = 0,
@@ -3913,6 +5039,12 @@
/* Channel width (u8). Takes one of enum nl80211_chan_width values. */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_WIDTH = 8,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_LIST = 9,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_PRIMARY = 10,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_SECONDARY = 11,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG0 = 12,
+ QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_FREQUENCY_CENTER_SEG1 = 13,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_LAST,
QCA_WLAN_VENDOR_ATTR_EXTERNAL_ACS_CHANNEL_MAX =
@@ -4314,6 +5446,44 @@
* qca_wlan_vendor_attr_spectral_scan_request_type.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_REQUEST_TYPE = 23,
+ /* This specifies the frequency span over which spectral
+ * scan would be carried out. Its value depends on the
+ * value of QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE and
+ * the relation is as follows.
+ * QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL
+ * Not applicable. Spectral scan would happen in the
+ * operating span.
+ * QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE
+ * Center frequency (in MHz) of the span of interest or
+ * for convenience, center frequency (in MHz) of any channel
+ * in the span of interest. If agile spectral scan is initiated
+ * without setting a valid frequency it returns the error code
+ * (QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED).
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY = 24,
+ /* Spectral scan mode. u32 attribute.
+ * It uses values defined in enum qca_wlan_vendor_spectral_scan_mode.
+ * If this attribute is not present, it is assumed to be
+ * normal mode (QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL).
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE = 25,
+ /* Spectral scan error code. u32 attribute.
+ * It uses values defined in enum
+ * qca_wlan_vendor_spectral_scan_error_code.
+ * This attribute is included only in failure scenarios.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE = 26,
+ /* 8-bit unsigned value to enable/disable debug of the
+ * Spectral DMA ring.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_RING_DEBUG = 27,
+ /* 8-bit unsigned value to enable/disable debug of the
+ * Spectral DMA buffers.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_DMA_BUFFER_DEBUG = 28,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_MAX =
@@ -4371,6 +5541,39 @@
* qca_wlan_vendor_spectral_scan_cap_hw_gen.
*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN = 5,
+ /* Spectral bin scaling formula ID. u16 attribute.
+ * It uses values defined in enum
+ * qca_wlan_vendor_spectral_scan_cap_formula_id.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_FORMULA_ID = 6,
+ /* Spectral bin scaling param - low level offset.
+ * s16 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_LOW_LEVEL_OFFSET = 7,
+ /* Spectral bin scaling param - high level offset.
+ * s16 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HIGH_LEVEL_OFFSET = 8,
+ /* Spectral bin scaling param - RSSI threshold.
+ * s16 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_RSSI_THR = 9,
+ /* Spectral bin scaling param - default AGC max gain.
+ * u8 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_DEFAULT_AGC_MAX_GAIN = 10,
+ /* Flag attribute to indicate agile spectral scan capability
+ * for 20/40/80 MHz modes.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL = 11,
+ /* Flag attribute to indicate agile spectral scan capability
+ * for 160 MHz mode.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL_160 = 12,
+ /* Flag attribute to indicate agile spectral scan capability
+ * for 80+80 MHz mode.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AGILE_SPECTRAL_80_80 = 13,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_MAX =
@@ -4387,6 +5590,13 @@
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ENABLED = 1,
/* Flag attribute to indicate whether spectral scan is in progress*/
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_IS_ACTIVE = 2,
+ /* Spectral scan mode. u32 attribute.
+ * It uses values defined in enum qca_wlan_vendor_spectral_scan_mode.
+ * If this attribute is not present, normal mode
+ * (QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL is assumed to be
+ * requested.
+ */
+ QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MODE = 3,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MAX =
@@ -4412,6 +5622,43 @@
};
/**
+ * qca_wlan_vendor_spectral_scan_mode: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_MODE in the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START and
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_STATUS_MODE in the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_STATUS. This represents the
+ * spectral scan modes.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL: Normal spectral scan:
+ * spectral scan in the current operating span.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE: Agile spectral scan:
+ * spectral scan in the configured agile span.
+ */
+enum qca_wlan_vendor_spectral_scan_mode {
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_NORMAL = 0,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_MODE_AGILE = 1,
+};
+
+/**
+ * qca_wlan_vendor_spectral_scan_error_code: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_ERROR_CODE in the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_START.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_UNSUPPORTED: Changing the value
+ * of a parameter is not supported.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_MODE_UNSUPPORTED: Requested spectral scan
+ * mode is not supported.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_INVALID_VALUE: A parameter
+ * has invalid value.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED: A parameter
+ * is not initialized.
+ */
+enum qca_wlan_vendor_spectral_scan_error_code {
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_UNSUPPORTED = 0,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_MODE_UNSUPPORTED = 1,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_INVALID_VALUE = 2,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_ERR_PARAM_NOT_INITIALIZED = 3,
+};
+
+/**
* qca_wlan_vendor_spectral_scan_cap_hw_gen: Attribute values for
* QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_HW_GEN to the vendor subcmd
* QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the
@@ -4516,6 +5763,20 @@
};
/**
+ * qca_wlan_vendor_spectral_scan_cap_formula_id: Attribute values for
+ * QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CAP_FORMULA_ID in the vendor subcmd
+ * QCA_NL80211_VENDOR_SUBCMD_SPECTRAL_SCAN_GET_CAP_INFO. This represents the
+ * Spectral bin scaling formula ID.
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_NO_SCALING: No scaling
+ * @QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_AGC_GAIN_RSSI_CORR_BASED: AGC gain
+ * and RSSI threshold based formula.
+ */
+enum qca_wlan_vendor_spectral_scan_cap_formula_id {
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_NO_SCALING = 0,
+ QCA_WLAN_VENDOR_SPECTRAL_SCAN_CAP_AGC_GAIN_RSSI_CORR_BASED = 1,
+};
+
+/**
* enum qca_wlan_vendor_attr_rropavail_info - Specifies whether Representative
* RF Operating Parameter (RROP) information is available, and if so, at which
* point in the application-driver interaction sequence it can be retrieved by
@@ -4574,12 +5835,22 @@
enum qca_wlan_vendor_attr_rtplinst {
QCA_WLAN_VENDOR_ATTR_RTPLINST_INVALID = 0,
- /* Primary channel number (u8) */
+ /* Primary channel number (u8).
+ * Note: If both the driver and user space application support the
+ * 6 GHz band, this attribute is deprecated and
+ * QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY should be used. To
+ * maintain backward compatibility,
+ * QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY is still used if either the
+ * driver or user space application or both do not support the 6 GHz
+ * band.
+ */
QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY = 1,
/* Representative Tx power in dBm (s32) with emphasis on throughput. */
QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_THROUGHPUT = 2,
/* Representative Tx power in dBm (s32) with emphasis on range. */
QCA_WLAN_VENDOR_ATTR_RTPLINST_TXPOWER_RANGE = 3,
+ /* Primary channel center frequency (u32) in MHz */
+ QCA_WLAN_VENDOR_ATTR_RTPLINST_PRIMARY_FREQUENCY = 4,
QCA_WLAN_VENDOR_ATTR_RTPLINST_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_RTPLINST_MAX =
@@ -4920,6 +6191,10 @@
* and ndp confirm.
*/
QCA_WLAN_VENDOR_ATTR_NDP_TRANSPORT_PROTOCOL = 29,
+ /* Unsigned 8-bit value indicating if NDP remote peer supports NAN NDPE.
+ * 1:support 0:not support
+ */
+ QCA_WLAN_VENDOR_ATTR_PEER_NDPE_SUPPORT = 30,
/* keep last */
QCA_WLAN_VENDOR_ATTR_NDP_PARAMS_AFTER_LAST,
@@ -5107,6 +6382,29 @@
};
/**
+ * enum qca_wlan_vendor_thermal_level - Defines various thermal levels
+ * configured by userspace to the driver/firmware. The values will be
+ * encapsulated in QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL attribute.
+ * The driver/firmware takes actions requested by userspace such as throttling
+ * wifi TX etc. in order to mitigate high temperature.
+ *
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_NONE: Stop/clear all throttling actions.
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_LIGHT: Throttle TX lightly.
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_MODERATE: Throttle TX moderately.
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_SEVERE: Throttle TX severely.
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_CRITICAL: Critical thermal level reached.
+ * @QCA_WLAN_VENDOR_THERMAL_LEVEL_EMERGENCY: Emergency thermal level reached.
+ */
+enum qca_wlan_vendor_thermal_level {
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_NONE = 0,
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_LIGHT = 1,
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_MODERATE = 2,
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_SEVERE = 3,
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_CRITICAL = 4,
+ QCA_WLAN_VENDOR_THERMAL_LEVEL_EMERGENCY = 5,
+};
+
+/**
* enum qca_wlan_vendor_attr_thermal_cmd - Vendor subcmd attributes to set
* cmd value. Used for NL attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD sub command.
@@ -5119,6 +6417,21 @@
* u32 attribute.
*/
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE = 1,
+ /* Userspace uses this attribute to configure thermal level to the
+ * driver/firmware. Used in request, u32 attribute, possible values
+ * are defined in enum qca_wlan_vendor_thermal_level.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL = 2,
+ /* Userspace uses this attribute to configure the time in which the
+ * driver/firmware should complete applying settings it received from
+ * userspace with QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL
+ * command type. Used in request, u32 attribute, value is in
+ * milliseconds. A value of zero indicates to apply the settings
+ * immediately. The driver/firmware can delay applying the configured
+ * thermal settings within the time specified in this attribute if
+ * there is any critical ongoing operation.
+ */
+ QCA_WLAN_VENDOR_ATTR_THERMAL_COMPLETION_WINDOW = 3,
/* keep last */
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_AFTER_LAST,
@@ -5142,12 +6455,15 @@
* suspend action.
* @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_RESUME: Request to execute thermal
* resume action.
+ * @QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL: Configure thermal level to
+ * the driver/firmware.
*/
enum qca_wlan_vendor_attr_thermal_cmd_type {
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_PARAMS,
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_GET_TEMPERATURE,
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SUSPEND,
QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_RESUME,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL,
};
/**
@@ -5360,6 +6676,89 @@
QCA_WLAN_HE_LTF_4X = 3,
};
+/**
+ * enum qca_wlan_he_mac_padding_dur - HE trigger frame MAC padding duration
+ *
+ * Indicates the HE trigger frame MAC padding duration value.
+ *
+ * @QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME: no additional time required to
+ * process the trigger frame.
+ * @QCA_WLAN_HE_8US_OF_PROCESS_TIME: indicates the 8us of processing time for
+ * trigger frame.
+ * @QCA_WLAN_HE_16US_OF_PROCESS_TIME: indicates the 16us of processing time for
+ * trigger frame.
+ */
+enum qca_wlan_he_mac_padding_dur {
+ QCA_WLAN_HE_NO_ADDITIONAL_PROCESS_TIME = 0,
+ QCA_WLAN_HE_8US_OF_PROCESS_TIME = 1,
+ QCA_WLAN_HE_16US_OF_PROCESS_TIME = 2,
+};
+
+/**
+ * enum qca_wlan_he_om_ctrl_ch_bw - HE OM control field BW configuration
+ *
+ * Indicates the HE Operating mode control channel width setting value.
+ *
+ * @QCA_WLAN_HE_OM_CTRL_BW_20M: Primary 20 MHz
+ * @QCA_WLAN_HE_OM_CTRL_BW_40M: Primary 40 MHz
+ * @QCA_WLAN_HE_OM_CTRL_BW_80M: Primary 80 MHz
+ * @QCA_WLAN_HE_OM_CTRL_BW_160M: 160 MHz and 80+80 MHz
+ */
+enum qca_wlan_he_om_ctrl_ch_bw {
+ QCA_WLAN_HE_OM_CTRL_BW_20M = 0,
+ QCA_WLAN_HE_OM_CTRL_BW_40M = 1,
+ QCA_WLAN_HE_OM_CTRL_BW_80M = 2,
+ QCA_WLAN_HE_OM_CTRL_BW_160M = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_he_omi_tx: Represents attributes for
+ * HE operating mode control transmit request. These attributes are
+ * sent as part of QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX and
+ * QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS: Mandatory 8-bit unsigned value
+ * indicates the maximum number of spatial streams, NSS, that the STA
+ * supports in reception for PPDU bandwidths less than or equal to 80 MHz
+ * and is set to NSS - 1.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW: Mandatory 8-bit unsigned value
+ * indicates the operating channel width supported by the STA for both
+ * reception and transmission. Uses enum qca_wlan_he_om_ctrl_ch_bw values.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE: Mandatory 8-bit unsigned value
+ * indicates the all trigger based UL MU operations by the STA.
+ * 0 - UL MU operations are enabled by the STA.
+ * 1 - All triggered UL MU transmissions are suspended by the STA.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS: Mandatory 8-bit unsigned value
+ * indicates the maximum number of space-time streams, NSTS, that
+ * the STA supports in transmission and is set to NSTS - 1.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE: 8-bit unsigned value
+ * combined with the UL MU Disable subfield and the recipient's setting
+ * of the OM Control UL MU Data Disable RX Support subfield in the HE MAC
+ * capabilities to determine which HE TB PPDUs are possible by the
+ * STA to transmit.
+ * 0 - UL MU data operations are enabled by the STA.
+ * 1 - Determine which HE TB PPDU types are allowed by the STA if UL MU disable
+ * bit is not set, else UL MU Tx is suspended.
+ *
+ */
+enum qca_wlan_vendor_attr_he_omi_tx {
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_RX_NSS = 1,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_CH_BW = 2,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DISABLE = 3,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_TX_NSTS = 4,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_ULMU_DATA_DISABLE = 5,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_MAX =
+ QCA_WLAN_VENDOR_ATTR_HE_OMI_AFTER_LAST - 1,
+};
+
/* Attributes for data used by
* QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION
*/
@@ -5420,10 +6819,10 @@
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADD_DEL_BA_SESSION = 7,
- /* 8-bit unsigned value to configure the buffer size in addba
+ /* 16-bit unsigned value to configure the buffer size in addba
* request and response frames.
* This attribute is used to configure the testbed device.
- * The range of the value is 0 to 255.
+ * The range of the value is 0 to 256.
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ADDBA_BUFF_SIZE = 8,
@@ -5459,6 +6858,190 @@
*/
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_TX_BEAMFORMEE = 13,
+ /* 8-bit unsigned value to configure the tx beamformee number
+ * of space-time streams.
+ * This attribute is used to configure the testbed device.
+ * The range of the value is 0 to 8.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_BEAMFORMEE_NSTS = 14,
+
+ /* 8-bit unsigned value to configure the MU EDCA params for given AC
+ * This attribute is used to configure the testbed device.
+ * Uses the enum qca_wlan_ac_type values.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AC = 15,
+
+ /* 8-bit unsigned value to configure the MU EDCA AIFSN for given AC
+ * To configure MU EDCA AIFSN value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_AIFSN = 16,
+
+ /* 8-bit unsigned value to configure the MU EDCA ECW min value for
+ * given AC.
+ * To configure MU EDCA ECW min value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMIN = 17,
+
+ /* 8-bit unsigned value to configure the MU EDCA ECW max value for
+ * given AC.
+ * To configure MU EDCA ECW max value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_ECWMAX = 18,
+
+ /* 8-bit unsigned value to configure the MU EDCA timer for given AC
+ * To configure MU EDCA timer value, MU EDCA access category value
+ * is required to process the command.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MU_EDCA_TIMER = 19,
+
+ /* 8-bit unsigned value to configure the HE trigger frame MAC padding
+ * duration.
+ * This attribute is used to configure the testbed device.
+ * Uses the enum qca_wlan_he_mac_padding_dur values.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MAC_PADDING_DUR = 20,
+
+ /* 8-bit unsigned value to override the MU EDCA params to defaults
+ * regardless of the AP beacon MU EDCA params. If it is enabled use
+ * the default values else use the MU EDCA params from AP beacon.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_OVERRIDE_MU_EDCA = 21,
+
+ /* 8-bit unsigned value to configure the support for receiving
+ * an MPDU that contains an operating mode control subfield.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_SUPP = 22,
+
+ /* Nested attribute values required to setup the TWT session.
+ * enum qca_wlan_vendor_attr_twt_setup provides the necessary
+ * information to set up the session. It contains broadcast flags,
+ * set_up flags, trigger value, flow type, flow ID, wake interval
+ * exponent, protection, target wake time, wake duration, wake interval
+ * mantissa. These nested attributes are used to setup a host triggered
+ * TWT session.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP = 23,
+
+ /* This nested attribute is used to terminate the current TWT session.
+ * It does not currently carry any attributes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_TERMINATE = 24,
+
+ /* This nested attribute is used to suspend the current TWT session.
+ * It does not currently carry any attributes.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SUSPEND = 25,
+
+ /* Nested attribute values to indicate the request for resume.
+ * This attribute is used to resume the TWT session.
+ * enum qca_wlan_vendor_attr_twt_resume provides the necessary
+ * parameters required to resume the TWT session.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME = 26,
+
+ /* 8-bit unsigned value to set the HE operating mode control
+ * (OM CTRL) Channel Width subfield.
+ * The Channel Width subfield indicates the operating channel width
+ * supported by the STA for both reception and transmission.
+ * Uses the enum qca_wlan_he_om_ctrl_ch_bw values.
+ * This setting is cleared with the
+ * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
+ * flag attribute to reset defaults.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_BW = 27,
+
+ /* 8-bit unsigned value to configure the number of spatial
+ * streams in HE operating mode control field.
+ * This setting is cleared with the
+ * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
+ * flag attribute to reset defaults.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_NSS = 28,
+
+ /* Flag attribute to configure the UL MU disable bit in
+ * HE operating mode control field.
+ * This setting is cleared with the
+ * QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG
+ * flag attribute to reset defaults.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OM_CTRL_UL_MU_DISABLE = 29,
+
+ /* Flag attribute to clear the previously set HE operating mode
+ * control field configuration.
+ * This attribute is used to configure the testbed device to reset
+ * defaults to clear any previously set HE operating mode control
+ * field configuration.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_CLEAR_HE_OM_CTRL_CONFIG = 30,
+
+ /* 8-bit unsigned value to configure HE single user PPDU
+ * transmission. By default this setting is disabled and it
+ * is disabled in the reset defaults of the device configuration.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TX_SUPPDU = 31,
+
+ /* 8-bit unsigned value to configure action frame transmission
+ * in HE trigger based PPDU transmission.
+ * By default this setting is disabled and it is disabled in
+ * the reset defaults of the device configuration.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_ACTION_TX_TB_PPDU = 32,
+
+ /* Nested attribute to indicate HE operating mode control field
+ * transmission. It contains operating mode control field Nss,
+ * channel bandwidth, Tx Nsts and UL MU disable attributes.
+ * These nested attributes are used to send HE operating mode control
+ * with configured values.
+ * Uses the enum qca_wlan_vendor_attr_he_omi_tx attributes.
+ * This attribute is used to configure the testbed device.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_OMI_TX = 33,
+
+ /* 8-bit unsigned value to configure +HTC_HE support to indicate the
+ * support for the reception of a frame that carries an HE variant
+ * HT Control field.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_HTC_HE_SUPP = 34,
+
+ /* 8-bit unsigned value to configure VHT support in 2.4G band.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ENABLE_2G_VHT = 35,
+
+ /* 8-bit unsigned value to configure HE testbed defaults.
+ * This attribute is used to configure the testbed device.
+ * 1-set the device HE capabilities to testbed defaults.
+ * 0-reset the device HE capabilities to supported config.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SET_HE_TESTBED_DEFAULTS = 36,
+
+ /* 8-bit unsigned value to configure TWT request support.
+ * This attribute is used to configure the testbed device.
+ * 1-enable, 0-disable.
+ */
+ QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_TWT_REQ_SUPPORT = 37,
+
/* keep last */
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
@@ -5564,4 +7147,1445 @@
QCA_WLAN_VENDOR_BSS_FILTER_STA_STATS_AFTER_LAST - 1
};
+/* enum qca_wlan_nan_subcmd_type - Type of NAN command used by attribute
+ * QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE as a part of vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
+ */
+enum qca_wlan_nan_ext_subcmd_type {
+ /* Subcmd of type NAN Enable Request */
+ QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ = 1,
+ /* Subcmd of type NAN Disable Request */
+ QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_nan_params - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.
+ */
+enum qca_wlan_vendor_attr_nan_params {
+ QCA_WLAN_VENDOR_ATTR_NAN_INVALID = 0,
+ /* Carries NAN command for firmware component. Every vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT must contain this attribute with a
+ * payload containing the NAN command. NLA_BINARY attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_CMD_DATA = 1,
+ /* Indicates the type of NAN command sent with
+ * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. enum qca_wlan_nan_ext_subcmd_type
+ * describes the possible range of values. This attribute is mandatory
+ * if the command being issued is either
+ * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ or
+ * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ. NLA_U32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE = 2,
+ /* Frequency (in MHz) of primary NAN discovery social channel in 2.4 GHz
+ * band. This attribute is mandatory when command type is
+ * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ. NLA_U32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_DISC_24GHZ_BAND_FREQ = 3,
+ /* Frequency (in MHz) of secondary NAN discovery social channel in 5 GHz
+ * band. This attribute is optional and should be included when command
+ * type is QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ and NAN discovery
+ * has to be started on 5GHz along with 2.4GHz. NLA_U32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_NAN_DISC_5GHZ_BAND_FREQ = 4,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_MAX =
+ QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_setup: Represents attributes for
+ * TWT (Target Wake Time) setup request. These attributes are sent as part of
+ * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_SETUP and
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST: Flag attribute.
+ * Disable (flag attribute not present) - Individual TWT
+ * Enable (flag attribute present) - Broadcast TWT.
+ * Individual means the session is between the STA and the AP.
+ * This session is established using a separate negotiation between
+ * STA and AP.
+ * Broadcast means the session is across multiple STAs and an AP. The
+ * configuration parameters are announced in Beacon frames by the AP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE: Required (u8).
+ * Unsigned 8-bit qca_wlan_vendor_twt_setup_req_type to
+ * specify the TWT request type
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER: Flag attribute
+ * Enable (flag attribute present) - TWT with trigger support.
+ * Disable (flag attribute not present) - TWT without trigger support.
+ * Trigger means the AP will send the trigger frame to allow STA to send data.
+ * Without trigger, the STA will wait for the MU EDCA timer before
+ * transmitting the data.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE: Required (u8)
+ * 0 - Announced TWT - In this mode, STA may skip few service periods to
+ * save more power. If STA wants to wake up, it will send a PS-POLL/QoS
+ * NULL frame to AP.
+ * 1 - Unannounced TWT - The STA will wakeup during every SP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID: Optional (u8)
+ * Flow ID is the unique identifier for each TWT session.
+ * Currently this is not required and dialog ID will be set to zero.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP: Required (u8)
+ * This attribute (exp) is used along with the mantissa to derive the
+ * wake interval using the following formula:
+ * pow(2,exp) = wake_intvl_us/wake_intvl_mantis
+ * Wake interval is the interval between 2 successive SP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION: Flag attribute
+ * Enable (flag attribute present) - Protection required.
+ * Disable (flag attribute not present) - Protection not required.
+ * If protection is enabled, then the AP will use protection
+ * mechanism using RTS/CTS to self to reserve the airtime.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME: Optional (u32)
+ * This attribute is used as the SP offset which is the offset from
+ * TSF after which the wake happens. The units are in microseconds. If
+ * this attribute is not provided, then the value will be set to zero.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION: Required (u32)
+ * This is the duration of the service period. The units are in TU.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA: Required (u32)
+ * This attribute is used to configure wake interval mantissa.
+ * The units are in TU.
+ */
+enum qca_wlan_vendor_attr_twt_setup {
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_BCAST = 1,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_REQ_TYPE = 2,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_TRIGGER = 3,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_TYPE = 4,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_FLOW_ID = 5,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_EXP = 6,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_PROTECTION = 7,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_TIME = 8,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_DURATION = 9,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA = 10,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_MAX =
+ QCA_WLAN_VENDOR_ATTR_TWT_SETUP_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_twt_resume: Represents attributes for
+ * TWT (Target Wake Time) resume request. These attributes are sent as part of
+ * %QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_TWT_RESUME and
+ * %QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT: Optional (u8)
+ * This attribute is used as the SP offset which is the offset from
+ * TSF after which the wake happens. The units are in microseconds.
+ * If this attribute is not provided, then the value will be set to
+ * zero.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE: Required (u32)
+ * This attribute represents the next TWT subfield size.
+ */
+enum qca_wlan_vendor_attr_twt_resume {
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT = 1,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_NEXT_TWT_SIZE = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_MAX =
+ QCA_WLAN_VENDOR_ATTR_TWT_RESUME_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_twt_setup_req_type - Required (u8)
+ * Represents the setup type being requested for TWT.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_REQUEST: STA is not specifying all the TWT
+ * parameters but relying on AP to fill the parameters during the negotiation.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST: STA will provide all the suggested
+ * values which the AP may accept or AP may provide alternative parameters
+ * which the STA may accept.
+ * @QCA_WLAN_VENDOR_TWT_SETUP_DEMAND: STA is not willing to accept any
+ * alternate parameters than the requested ones.
+ */
+enum qca_wlan_vendor_twt_setup_req_type {
+ QCA_WLAN_VENDOR_TWT_SETUP_REQUEST = 1,
+ QCA_WLAN_VENDOR_TWT_SETUP_SUGGEST = 2,
+ QCA_WLAN_VENDOR_TWT_SETUP_DEMAND = 3,
+};
+
+/**
+ * enum qca_wlan_roam_scan_event_type - Type of roam scan event
+ *
+ * Indicates the type of roam scan event sent by firmware/driver.
+ *
+ * @QCA_WLAN_ROAM_SCAN_TRIGGER_EVENT: Roam scan trigger event type.
+ * @QCA_WLAN_ROAM_SCAN_STOP_EVENT: Roam scan stopped event type.
+ */
+enum qca_wlan_roam_scan_event_type {
+ QCA_WLAN_ROAM_SCAN_TRIGGER_EVENT = 0,
+ QCA_WLAN_ROAM_SCAN_STOP_EVENT = 1,
+};
+
+/**
+ * enum qca_wlan_roam_scan_trigger_reason - Roam scan trigger reason
+ *
+ * Indicates the reason for triggering roam scan by firmware/driver.
+ *
+ * @QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_LOW_RSSI: Due to low RSSI of current AP.
+ * @QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_HIGH_PER: Due to high packet error rate.
+ */
+enum qca_wlan_roam_scan_trigger_reason {
+ QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_LOW_RSSI = 0,
+ QCA_WLAN_ROAM_SCAN_TRIGGER_REASON_HIGH_PER = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_roam_scan - Vendor subcmd attributes to report
+ * roam scan related details from driver/firmware to user space. enum values
+ * are used for NL attributes sent with
+ * %QCA_NL80211_VENDOR_SUBCMD_ROAM_SCAN_EVENT sub command.
+ */
+enum qca_wlan_vendor_attr_roam_scan {
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_INVALID = 0,
+ /* Encapsulates type of roam scan event being reported. enum
+ * qca_wlan_roam_scan_event_type describes the possible range of
+ * values. u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_EVENT_TYPE = 1,
+ /* Encapsulates reason for triggering roam scan. enum
+ * qca_wlan_roam_scan_trigger_reason describes the possible range of
+ * values. u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_TRIGGER_REASON = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_MAX =
+ QCA_WLAN_VENDOR_ATTR_ROAM_SCAN_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_cfr_method - QCA vendor CFR methods used by
+ * attribute QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD as part of vendor
+ * command QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG.
+ */
+enum qca_wlan_vendor_cfr_method {
+ /* CFR method using QOS Null frame */
+ QCA_WLAN_VENDOR_CFR_METHOD_QOS_NULL = 0,
+};
+
+/**
+ * enum qca_wlan_vendor_peer_cfr_capture_attr - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_PEER_CFR_CAPTURE_CFG to configure peer
+ * Channel Frequency Response capture parameters and enable periodic CFR
+ * capture.
+ */
+enum qca_wlan_vendor_peer_cfr_capture_attr {
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_CAPTURE_INVALID = 0,
+ /* 6-byte MAC address of the peer.
+ * This attribute is mandatory.
+ */
+ QCA_WLAN_VENDOR_ATTR_CFR_PEER_MAC_ADDR = 1,
+ /* Enable peer CFR Capture, flag attribute.
+ * This attribute is mandatory to enable peer CFR capture.
+ * If this attribute is not present, peer CFR capture is disabled.
+ */
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE = 2,
+ /* BW of measurement, attribute uses the values in enum nl80211_chan_width
+ * Supported values: 20, 40, 80, 80+80, 160.
+ * Note that all targets may not support all bandwidths.
+ * u8 attribute. This attribute is mandatory if attribute
+ * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
+ */
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_BANDWIDTH = 3,
+ /* Periodicity of CFR measurement in msec.
+ * Periodicity should be a multiple of Base timer.
+ * Current Base timer value supported is 10 msecs (default).
+ * 0 for one shot capture. u32 attribute.
+ * This attribute is mandatory if attribute
+ * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
+ */
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_PERIODICITY = 4,
+ /* Method used to capture Channel Frequency Response.
+ * Attribute uses the values defined in enum qca_wlan_vendor_cfr_method.
+ * u8 attribute. This attribute is mandatory if attribute
+ * QCA_WLAN_VENDOR_ATTR_PEER_CFR_ENABLE is used.
+ */
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_METHOD = 5,
+ /* Enable periodic CFR capture, flag attribute.
+ * This attribute is mandatory to enable Periodic CFR capture.
+ * If this attribute is not present, periodic CFR capture is disabled.
+ */
+ QCA_WLAN_VENDOR_ATTR_PERIODIC_CFR_CAPTURE_ENABLE = 6,
+
+ /* Keep last */
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_MAX =
+ QCA_WLAN_VENDOR_ATTR_PEER_CFR_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_throughput_level - Current throughput level
+ *
+ * Indicates the current level of throughput calculated by the driver. The
+ * driver may choose different thresholds to decide whether the throughput level
+ * is low or medium or high based on variety of parameters like physical link
+ * capacity of the current connection, the number of packets being dispatched
+ * per second, etc. The throughput level events might not be consistent with the
+ * actual current throughput value being observed.
+ *
+ * @QCA_WLAN_THROUGHPUT_LEVEL_LOW: Low level of throughput
+ * @QCA_WLAN_THROUGHPUT_LEVEL_MEDIUM: Medium level of throughput
+ * @QCA_WLAN_THROUGHPUT_LEVEL_HIGH: High level of throughput
+ */
+enum qca_wlan_throughput_level {
+ QCA_WLAN_THROUGHPUT_LEVEL_LOW = 0,
+ QCA_WLAN_THROUGHPUT_LEVEL_MEDIUM = 1,
+ QCA_WLAN_THROUGHPUT_LEVEL_HIGH = 2,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_throughput_change - Vendor subcmd attributes to
+ * report throughput changes from the driver to user space. enum values are used
+ * for netlink attributes sent with
+ * %QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT sub command.
+ */
+enum qca_wlan_vendor_attr_throughput_change {
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_INVALID = 0,
+ /* Indicates the direction of throughput in which the change is being
+ * reported. u8 attribute. Value is 0 for TX and 1 for RX.
+ */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_DIRECTION = 1,
+ /* Indicates the newly observed throughput level. enum
+ * qca_wlan_throughput_level describes the possible range of values.
+ * u8 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_THROUGHPUT_LEVEL = 2,
+ /* Indicates the driver's guidance on the new value to be set to
+ * kernel's TCP parameter tcp_limit_output_bytes. u32 attribute. The
+ * driver may optionally include this attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_LIMIT_OUTPUT_BYTES = 3,
+ /* Indicates the driver's guidance on the new value to be set to
+ * kernel's TCP parameter tcp_adv_win_scale. s8 attribute. Possible
+ * values are from -31 to 31. The driver may optionally include this
+ * attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_ADV_WIN_SCALE = 4,
+ /* Indicates the driver's guidance on the new value to be set to
+ * kernel's TCP parameter tcp_delack_seg. u32 attribute. The driver may
+ * optionally include this attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_TCP_DELACK_SEG = 5,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_MAX =
+ QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_coex_config_profiles - This enum defines different types of
+ * traffic streams that can be prioritized one over the other during coex
+ * scenarios.
+ * The types defined in this enum are categorized in the below manner.
+ * 0 - 31 values corresponds to WLAN
+ * 32 - 63 values corresponds to BT
+ * 64 - 95 values corresponds to Zigbee
+ * @QCA_WIFI_STA_DISCOVERY: Prioritize discovery frames for WLAN STA
+ * @QCA_WIFI_STA_CONNECTION: Prioritize connection frames for WLAN STA
+ * @QCA_WIFI_STA_CLASS_3_MGMT: Prioritize class 3 mgmt frames for WLAN STA
+ * @QCA_WIFI_STA_DATA : Prioritize data frames for WLAN STA
+ * @QCA_WIFI_STA_ALL: Priritize all frames for WLAN STA
+ * @QCA_WIFI_SAP_DISCOVERY: Prioritize discovery frames for WLAN SAP
+ * @QCA_WIFI_SAP_CONNECTION: Prioritize connection frames for WLAN SAP
+ * @QCA_WIFI_SAP_CLASS_3_MGMT: Prioritize class 3 mgmt frames for WLAN SAP
+ * @QCA_WIFI_SAP_DATA: Prioritize data frames for WLAN SAP
+ * @QCA_WIFI_SAP_ALL: Prioritize all frames for WLAN SAP
+ * @QCA_BT_A2DP: Prioritize BT A2DP
+ * @QCA_BT_BLE: Prioritize BT BLE
+ * @QCA_BT_SCO: Prioritize BT SCO
+ * @QCA_ZB_LOW: Prioritize Zigbee Low
+ * @QCA_ZB_HIGH: Prioritize Zigbee High
+ */
+enum qca_coex_config_profiles {
+ /* 0 - 31 corresponds to WLAN */
+ QCA_WIFI_STA_DISCOVERY = 0,
+ QCA_WIFI_STA_CONNECTION = 1,
+ QCA_WIFI_STA_CLASS_3_MGMT = 2,
+ QCA_WIFI_STA_DATA = 3,
+ QCA_WIFI_STA_ALL = 4,
+ QCA_WIFI_SAP_DISCOVERY = 5,
+ QCA_WIFI_SAP_CONNECTION = 6,
+ QCA_WIFI_SAP_CLASS_3_MGMT = 7,
+ QCA_WIFI_SAP_DATA = 8,
+ QCA_WIFI_SAP_ALL = 9,
+ QCA_WIFI_CASE_MAX = 31,
+ /* 32 - 63 corresponds to BT */
+ QCA_BT_A2DP = 32,
+ QCA_BT_BLE = 33,
+ QCA_BT_SCO = 34,
+ QCA_BT_CASE_MAX = 63,
+ /* 64 - 95 corresponds to Zigbee */
+ QCA_ZB_LOW = 64,
+ QCA_ZB_HIGH = 65,
+ QCA_ZB_CASE_MAX = 95,
+ /* 0xff is default value if the u8 profile value is not set. */
+ QCA_COEX_CONFIG_PROFILE_DEFAULT_VALUE = 255
+};
+
+/**
+ * enum qca_vendor_attr_coex_config_types - Coex configurations types.
+ * This enum defines the valid set of values of coex configuration types. These
+ * values may used by attribute
+ * %QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_RESET: Reset all the
+ * weights to default values.
+ * @QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_START: Start to config
+ * weights with configurability value.
+ */
+enum qca_vendor_attr_coex_config_types {
+ QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_RESET = 1,
+ QCA_WLAN_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_COEX_START = 2,
+};
+
+/**
+ * enum qca_vendor_attr_coex_config - Specifies vendor coex config attributes
+ *
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_PROFILES: This attribute contains variable
+ * length array of 8-bit values from enum qca_coex_config_profiles.
+ * FW will prioritize the profiles in the order given in the array encapsulated
+ * in this attribute.
+ * For example:
+ * -----------------------------------------------------------------------
+ * | 1 | 34 | 32 | 65 |
+ * -----------------------------------------------------------------------
+ * If the attribute contains the values defined in above array then it means
+ * 1) Wifi STA connection has priority over BT_SCO, BT_A2DP and ZIGBEE HIGH.
+ * 2) BT_SCO has priority over BT_A2DP.
+ * 3) BT_A2DP has priority over ZIGBEE HIGH.
+ * Profiles which are not listed in this array shall not be preferred over the
+ * profiles which are listed in the array as a part of this attribute.
+ */
+enum qca_vendor_attr_coex_config {
+ QCA_VENDOR_ATTR_COEX_CONFIG_INVALID = 0,
+ QCA_VENDOR_ATTR_COEX_CONFIG_PROFILES = 1,
+
+ /* Keep last */
+ QCA_VENDOR_ATTR_COEX_CONFIG_AFTER_LAST,
+ QCA_VENDOR_ATTR_COEX_CONFIG_MAX =
+ QCA_VENDOR_ATTR_COEX_CONFIG_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_vendor_attr_coex_config_three_way - Specifies vendor coex config
+ * attributes
+ * Attributes for data used by QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG
+ *
+ * QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE: u32 attribute.
+ * Indicate config type.
+ * The config types are 32-bit values from qca_vendor_attr_coex_config_types
+ *
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_1: u32 attribute.
+ * Indicate the Priority 1 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_2: u32 attribute.
+ * Indicate the Priority 2 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_3: u32 attribute.
+ * Indicate the Priority 3 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * @QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_4: u32 attribute.
+ * Indicate the Priority 4 profiles.
+ * The profiles are 8-bit values from enum qca_coex_config_profiles.
+ * In same priority level, maximum to 4 profiles can be set here.
+ * NOTE:
+ * Limitations for QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_x priority
+ * arrangement:
+ * 1: In the same u32 attribute (priority x), the profiles enum values own
+ * same priority level.
+ * 2: 0xff is default value if the u8 profile value is not set.
+ * 3: max to 4 rules/profiles in same priority level.
+ * 4: max to 4 priority level (priority 1 - priority 4)
+ * 5: one priority level only supports one scenario from WLAN/BT/ZB,
+ * hybrid rules not support.
+ * 6: if WMI_COEX_CONFIG_THREE_WAY_COEX_RESET called, priority x will
+ * remain blank to reset all parameters.
+ * For example:
+ *
+ * If the attributes as follow:
+ * priority 1:
+ * ------------------------------------
+ * | 0xff | 0 | 1 | 2 |
+ * ------------------------------------
+ * priority 2:
+ * -------------------------------------
+ * | 0xff | 0xff | 0xff | 32 |
+ * -------------------------------------
+ * priority 3:
+ * -------------------------------------
+ * | 0xff | 0xff | 0xff | 65 |
+ * -------------------------------------
+ * then it means:
+ * 1: WIFI_STA_DISCOVERY, WIFI_STA_CLASS_3_MGMT and WIFI_STA_CONNECTION
+ * owns same priority level.
+ * 2: WIFI_STA_DISCOVERY, WIFI_STA_CLASS_3_MGMT and WIFI_STA_CONNECTION
+ * has priority over BT_A2DP and ZB_HIGH.
+ * 3: BT_A2DP has priority over ZB_HIGH.
+ */
+
+enum qca_vendor_attr_coex_config_three_way {
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_INVALID = 0,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_CONFIG_TYPE = 1,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_1 = 2,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_2 = 3,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_3 = 4,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_PRIORITY_4 = 5,
+
+ /* Keep last */
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_AFTER_LAST,
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_MAX =
+ QCA_VENDOR_ATTR_COEX_CONFIG_THREE_WAY_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_link_properties - Represent the link properties.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR: MAC address of the peer
+ * (STA/AP) for the connected link.
+ * @QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_STA_FLAGS: Attribute containing a
+ * &struct nl80211_sta_flag_update for the respective connected link. MAC
+ * address of the peer represented by
+ * QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR.
+ */
+enum qca_wlan_vendor_attr_link_properties {
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_INVALID = 0,
+ /* 1 - 3 are reserved */
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_MAC_ADDR = 4,
+ QCA_WLAN_VENDOR_ATTR_LINK_PROPERTIES_STA_FLAGS = 5,
+
+ /* Keep last */
+ QCA_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST,
+ QCA_VENDOR_ATTR_LINK_PROPERTIES_MAX =
+ QCA_VENDOR_ATTR_LINK_PROPERTIES_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_vendor_attr_peer_stats_cache_type - Represents peer stats cache type
+ * This enum defines the valid set of values of peer stats cache types. These
+ * values are used by attribute
+ * %QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_TX_RATE_STATS: Represents peer TX rate statistics
+ * @QCA_WLAN_VENDOR_ATTR_PEER_RX_RATE_STATS: Represents peer RX rate statistics
+ * @QCA_WLAN_VENDOR_ATTR_PEER_TX_SOJOURN_STATS: Represents peer TX sojourn
+ * statistics
+ */
+enum qca_vendor_attr_peer_stats_cache_type {
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_PEER_TX_RATE_STATS,
+ QCA_WLAN_VENDOR_ATTR_PEER_RX_RATE_STATS,
+ QCA_WLAN_VENDOR_ATTR_PEER_TX_SOJOURN_STATS,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_peer_stats_cache_params - This enum defines
+ * attributes required for QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH
+ * Information in these attributes is used to flush peer rate statistics from
+ * the driver to user application.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE: Unsigned 32-bit attribute
+ * Indicate peer statistics cache type.
+ * The statistics types are 32-bit values from
+ * enum qca_vendor_attr_peer_stats_cache_type.
+ * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_MAC: Unsigned 8-bit array
+ * of size 6 octets, representing the peer MAC address.
+ * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA: Opaque data attribute
+ * containing buffer of statistics to send to application layer entity.
+ * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_COOKIE: Unsigned 64-bit attribute
+ * representing a cookie for peer unique session.
+ */
+enum qca_wlan_vendor_attr_peer_stats_cache_params {
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_INVALID = 0,
+
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE = 1,
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_MAC = 2,
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA = 3,
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_COOKIE = 4,
+
+ /* Keep last */
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST,
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_MAX =
+ QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST - 1
+};
+
+/**
+ * enum qca_mpta_helper_attr_zigbee_state - Current Zigbee state
+ * This enum defines all the possible states of Zigbee, which can be
+ * delivered in the QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE attribute.
+ *
+ * @ZIGBEE_IDLE: Zigbee in idle state
+ * @ZIGBEE_FORM_NETWORK: Zigbee forming network
+ * @ZIGBEE_WAIT_JOIN: Zigbee waiting for joining network
+ * @ZIGBEE_JOIN: Zigbee joining network
+ * @ZIGBEE_NETWORK_UP: Zigbee network is up
+ * @ZIGBEE_HMI: Zigbee in HMI mode
+ */
+enum qca_mpta_helper_attr_zigbee_state {
+ ZIGBEE_IDLE = 0,
+ ZIGBEE_FORM_NETWORK = 1,
+ ZIGBEE_WAIT_JOIN = 2,
+ ZIGBEE_JOIN = 3,
+ ZIGBEE_NETWORK_UP = 4,
+ ZIGBEE_HMI = 5,
+};
+
+/*
+ * enum qca_mpta_helper_vendor_attr - Attributes used in vendor sub-command
+ * QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG.
+ */
+enum qca_mpta_helper_vendor_attr {
+ QCA_MPTA_HELPER_VENDOR_ATTR_INVALID = 0,
+ /* Optional attribute used to update Zigbee state.
+ * enum qca_mpta_helper_attr_zigbee_state.
+ * NLA_U32 attribute.
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE = 1,
+ /* Optional attribute used to configure WLAN duration for Shape-OCS
+ * during interrupt.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms).
+ * NLA_U32 attribute.
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION = 2,
+ /* Optional attribute used to configure non-WLAN duration for Shape-OCS
+ * during interrupt.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms).
+ * NLA_U32 attribute.
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION = 3,
+ /* Optional attribute used to configure WLAN duration for Shape-OCS
+ * monitor period.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION = 4,
+ /* Optional attribute used to configure non-WLAN duration for Shape-OCS
+ * monitor period.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION.
+ * Value range 0 ~ 300 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION = 5,
+ /* Optional attribute used to configure OCS interrupt duration.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION.
+ * Value range 1000 ~ 20000 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION = 6,
+ /* Optional attribute used to configure OCS monitor duration.
+ * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION.
+ * Value range 1000 ~ 20000 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION = 7,
+ /* Optional attribute used to notify WLAN firmware the current Zigbee
+ * channel.
+ * Value range 11 ~ 26
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_CHAN = 8,
+ /* Optional attribute used to configure WLAN mute duration.
+ * Value range 0 ~ 400 (ms)
+ * NLA_U32 attribute
+ */
+ QCA_MPTA_HELPER_VENDOR_ATTR_WLAN_MUTE_DURATION = 9,
+
+ /* keep last */
+ QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST,
+ QCA_MPTA_HELPER_VENDOR_ATTR_MAX =
+ QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_beacon_reporting_op_types - Defines different types of
+ * operations for which %QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING can be used.
+ * Will be used by %QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE.
+ *
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START: Sent by userspace to the driver
+ * to request the driver to start reporting Beacon frames.
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP: Sent by userspace to the driver to
+ * request the driver to stop reporting Beacon frames.
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO: Sent by the driver to
+ * userspace to report received Beacon frames.
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE: Sent by the driver to userspace
+ * to indicate that the driver is going to pause reporting Beacon frames.
+ */
+enum qca_wlan_vendor_beacon_reporting_op_types {
+ QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START = 0,
+ QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP = 1,
+ QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO = 2,
+ QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_beacon_reporting_pause_reasons - Defines different types
+ * of reasons for which the driver is pausing reporting Beacon frames. Will be
+ * used by %QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON.
+ *
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_UNSPECIFIED: For unspecified
+ * reasons.
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_SCAN_STARTED: When the
+ * driver/firmware is starting a scan.
+ * @QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED: When the
+ * driver/firmware disconnects from the ESS and indicates the disconnection to
+ * userspace (non-seamless roaming case). This reason code will be used by the
+ * driver/firmware to indicate stopping of beacon report events. Userspace will
+ * need to start beacon reporting again (if desired) by sending vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING with
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START after the next connection is
+ * completed.
+ */
+enum qca_wlan_vendor_beacon_reporting_pause_reasons {
+ QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_UNSPECIFIED = 0,
+ QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_SCAN_STARTED = 1,
+ QCA_WLAN_VENDOR_BEACON_REPORTING_PAUSE_REASON_DISCONNECTED = 2,
+};
+
+/*
+ * enum qca_wlan_vendor_attr_beacon_reporting_params - List of attributes used
+ * in vendor sub-command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING.
+ */
+enum qca_wlan_vendor_attr_beacon_reporting_params {
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_INVALID = 0,
+ /* Specifies the type of operation that the vendor command/event is
+ * intended for. Possible values for this attribute are defined in
+ * enum qca_wlan_vendor_beacon_reporting_op_types. u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE = 1,
+ /* Optionally set by userspace to request the driver to report Beacon
+ * frames using asynchronous vendor events when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START. NLA_FLAG attribute.
+ * If this flag is not set, the driver will only update Beacon frames in
+ * cfg80211 scan cache but not send any vendor events.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_ACTIVE_REPORTING = 2,
+ /* Optionally used by userspace to request the driver/firmware to report
+ * Beacon frames periodically when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START.
+ * u32 attribute, indicates the period of Beacon frames to be reported
+ * and in the units of beacon interval.
+ * If this attribute is missing in the command, then the default value
+ * of 1 will be assumed by driver, i.e., to report every Beacon frame.
+ * Zero is an invalid value.
+ * If a valid value is received for this attribute, the driver will
+ * update the cfg80211 scan cache periodically as per the value received
+ * in this attribute in addition to updating the cfg80211 scan cache
+ * when there is significant change in Beacon frame IEs.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PERIOD = 3,
+ /* Used by the driver to encapsulate the SSID when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
+ * u8 array with a maximum size of 32.
+ *
+ * When generating beacon report from non-MBSSID Beacon frame, the SSID
+ * will be taken from the SSID element of the received Beacon frame.
+ *
+ * When generating beacon report from Multiple BSSID Beacon frame and if
+ * the BSSID of the current connected BSS matches the BSSID of the
+ * transmitting BSS, the SSID will be taken from the SSID element of the
+ * received Beacon frame.
+ *
+ * When generating beacon report from Multiple BSSID Beacon frame and if
+ * the BSSID of the current connected BSS matches the BSSID of one of
+ * the* nontransmitting BSSs, the SSID will be taken from the SSID field
+ * included in the nontransmitted BSS profile whose derived BSSID is
+ * same as the BSSID of the current connected BSS. When there is no
+ * nontransmitted BSS profile whose derived BSSID is same as the BSSID
+ * of current connected* BSS, this attribute will not be present.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_SSID = 4,
+ /* Used by the driver to encapsulate the BSSID of the AP to which STA is
+ * currently connected to when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u8 array with a
+ * fixed size of 6 bytes.
+ *
+ * When generating beacon report from a Multiple BSSID beacon and the
+ * current connected BSSID matches one of the nontransmitted BSSIDs in a
+ * Multiple BSSID set, this BSSID will be that particular nontransmitted
+ * BSSID and not the transmitted BSSID (i.e., the transmitting address
+ * of the Beacon frame).
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BSSID = 5,
+ /* Used by the driver to encapsulate the frequency in MHz on which
+ * the Beacon frame was received when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is
+ * set to QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
+ * u32 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_FREQ = 6,
+ /* Used by the driver to encapsulate the Beacon interval
+ * when the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
+ * u16 attribute. The value will be copied from the Beacon frame and the
+ * units are TUs.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BI = 7,
+ /* Used by the driver to encapsulate the Timestamp field from the Beacon
+ * frame when the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set
+ * to QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO.
+ * u64 attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_TSF = 8,
+ /* Used by the driver to encapsulate the CLOCK_BOOTTIME when this
+ * Beacon frame is received in the driver when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u64 attribute, in
+ * the units of nanoseconds. This value is expected to have accuracy of
+ * about 10 ms.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_BOOTTIME_WHEN_RECEIVED = 9,
+ /* Used by the driver to encapsulate the IEs of the Beacon frame from
+ * which this event is generated when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_BEACON_INFO. u8 array.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_IES = 10,
+ /* Used by the driver to specify the reason for the driver/firmware to
+ * pause sending beacons to userspace when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE. Possible values are
+ * defined in enum qca_wlan_vendor_beacon_reporting_pause_reasons, u32
+ * attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_PAUSE_REASON = 11,
+ /* Used by the driver to specify whether the driver will automatically
+ * resume reporting beacon events to userspace later (for example after
+ * the ongoing off-channel activity is completed etc.) when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE. NLA_FLAG attribute.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES = 12,
+ /* Optionally set by userspace to request the driver not to resume
+ * beacon reporting after a pause is completed, when the
+ * QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE is set to
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START. NLA_FLAG attribute.
+ * If this flag is set, the driver will not resume beacon reporting
+ * after any pause in beacon reporting is completed. Userspace has to
+ * send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command again in order
+ * to initiate beacon reporting again. If this flag is set in the recent
+ * QCA_WLAN_VENDOR_BEACON_REPORTING_OP_START command, then in the
+ * subsequent QCA_WLAN_VENDOR_BEACON_REPORTING_OP_PAUSE event (if any)
+ * the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES shall not be
+ * set by the driver. Setting this flag until and unless there is a
+ * specific need is not recommended as there is a chance of some beacons
+ * received after pause command and next start command being not
+ * reported.
+ */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_DO_NOT_RESUME = 13,
+
+ /* Keep last */
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_LAST,
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_MAX =
+ QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_LAST - 1
+};
+
+/**
+ * enum qca_vendor_interop_issues_ap_type - Interop issue types
+ * This enum defines the valid set of values of interop issue types. These
+ * values are used by attribute %QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE.
+ *
+ * @QCA_VENDOR_INTEROP_ISSUES_AP_ON_STA_PS: The AP has power save interop issue
+ * when the STA's Qpower feature is enabled.
+ */
+enum qca_vendor_interop_issues_ap_type {
+ QCA_VENDOR_INTEROP_ISSUES_AP_INVALID = 0,
+ QCA_VENDOR_INTEROP_ISSUES_AP_ON_STA_PS = 1,
+};
+
+/**
+ * enum qca_vendor_attr_interop_issues_ap - attribute for AP with interop issues
+ * Values are used by %QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_INVALID: Invalid value
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE: Interop issue type
+ * 32-bit unsigned value. The values defined in enum
+ * qca_vendor_interop_issues_ap_type are used.
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST: APs' BSSID container
+ * array of nested QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID attributes.
+ * It is present and mandatory for the command but is not used for the event
+ * since only a single BSSID is reported in an event.
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID: AP's BSSID 6-byte MAC address.
+ * It is used within the nested QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST
+ * attribute in command case and without such encapsulation in the event case.
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST: last value
+ * @QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_MAX: max value
+ */
+enum qca_vendor_attr_interop_issues_ap {
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_INVALID,
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_TYPE,
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_LIST,
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_BSSID,
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_MAX =
+ QCA_WLAN_VENDOR_ATTR_INTEROP_ISSUES_AP_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_vendor_oem_device_type - Represents the target device in firmware.
+ * It is used by QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO.
+ *
+ * @QCA_VENDOR_OEM_DEVICE_VIRTUAL: The command is intended for
+ * a virtual device.
+ *
+ * @QCA_VENDOR_OEM_DEVICE_PHYSICAL: The command is intended for
+ * a physical device.
+ */
+enum qca_vendor_oem_device_type {
+ QCA_VENDOR_OEM_DEVICE_VIRTUAL = 0,
+ QCA_VENDOR_OEM_DEVICE_PHYSICAL = 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_oem_data_params - Used by the vendor command/event
+ * QCA_NL80211_VENDOR_SUBCMD_OEM_DATA.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA: The binary blob for the vendor
+ * command/event QCA_NL80211_VENDOR_SUBCMD_OEM_DATA are carried through this
+ * attribute.
+ * NLA_BINARY attribute, the max size is 1024 bytes.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO: The binary blob will be routed
+ * based on this field. This optional attribute is included to specify whether
+ * the device type is a virtual device or a physical device for the
+ * command/event. This attribute can be omitted for a virtual device (default)
+ * command/event.
+ * This u8 attribute is used to carry information for the device type using
+ * values defined by enum qca_vendor_oem_device_type.
+ */
+enum qca_wlan_vendor_attr_oem_data_params {
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_CMD_DATA = 1,
+ QCA_WLAN_VENDOR_ATTR_OEM_DEVICE_INFO = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_MAX =
+ QCA_WLAN_VENDOR_ATTR_OEM_DATA_PARAMS_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_wlan_vendor_attr_avoid_frequency_ext - Defines attributes to be
+ * used with vendor command/event QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY_EXT.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_RANGE: Required
+ * Nested attribute containing multiple ranges with following attributes:
+ * QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START and
+ * QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START: Required (u32)
+ * Starting center frequency in MHz.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END: Required (u32)
+ * Ending center frequency in MHz.
+ */
+enum qca_wlan_vendor_attr_avoid_frequency_ext {
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_RANGE = 1,
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_START = 2,
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_END = 3,
+
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_MAX =
+ QCA_WLAN_VENDOR_ATTR_AVOID_FREQUENCY_AFTER_LAST - 1
+};
+
+/*
+ * enum qca_wlan_vendor_attr_add_sta_node_params - Used by the vendor command
+ * QCA_NL80211_VENDOR_SUBCMD_ADD_STA_NODE.
+ */
+enum qca_wlan_vendor_attr_add_sta_node_params {
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_INVALID = 0,
+ /* 6 byte MAC address of STA */
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_MAC_ADDR = 1,
+ /* Authentication algorithm used by the station of size u16;
+ * defined in enum nl80211_auth_type.
+ */
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_AUTH_ALGO = 2,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_MAX =
+ QCA_WLAN_VENDOR_ATTR_ADD_STA_NODE_PARAM_AFTER_LAST - 1
+};
+
+/**
+ * enum qca_btc_chain_mode - Specifies BT coex chain mode.
+ * This enum defines the valid set of values of BT coex chain mode.
+ * These values are used by attribute %QCA_VENDOR_ATTR_BTC_CHAIN_MODE of
+ * %QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE.
+ *
+ * @QCA_BTC_CHAIN_SHARED: chains of BT and WLAN 2.4G are shared.
+ * @QCA_BTC_CHAIN_SEPARATED: chains of BT and WLAN 2.4G are separated.
+ */
+enum qca_btc_chain_mode {
+ QCA_BTC_CHAIN_SHARED = 0,
+ QCA_BTC_CHAIN_SEPARATED = 1,
+};
+
+/**
+ * enum qca_vendor_attr_btc_chain_mode - Specifies attributes for BT coex
+ * chain mode.
+ * Attributes for data used by QCA_NL80211_VENDOR_SUBCMD_BTC_CHAIN_MODE.
+ *
+ * @QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE: u32 attribute.
+ * Indicates the BT coex chain mode, are 32-bit values from
+ * enum qca_btc_chain_mode. This attribute is mandatory.
+ *
+ * @QCA_VENDOR_ATTR_COEX_BTC_CHAIN_MODE_RESTART: flag attribute.
+ * If set, vdev should be restarted when BT coex chain mode is updated.
+ * This attribute is optional.
+ */
+enum qca_vendor_attr_btc_chain_mode {
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE_INVALID = 0,
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE = 1,
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE_RESTART = 2,
+
+ /* Keep last */
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE_LAST,
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE_MAX =
+ QCA_VENDOR_ATTR_BTC_CHAIN_MODE_LAST - 1,
+};
+
+/**
+ * enum qca_vendor_wlan_sta_flags - Station feature flags
+ * Bits will be set to 1 if the corresponding features are enabled.
+ * @QCA_VENDOR_WLAN_STA_FLAG_AMPDU: AMPDU is enabled for the station
+ * @QCA_VENDOR_WLAN_STA_FLAG_TX_STBC: TX Space-time block coding is enabled
+ for the station
+ * @QCA_VENDOR_WLAN_STA_FLAG_RX_STBC: RX Space-time block coding is enabled
+ for the station
+ */
+enum qca_vendor_wlan_sta_flags {
+ QCA_VENDOR_WLAN_STA_FLAG_AMPDU = BIT(0),
+ QCA_VENDOR_WLAN_STA_FLAG_TX_STBC = BIT(1),
+ QCA_VENDOR_WLAN_STA_FLAG_RX_STBC = BIT(2),
+};
+
+/**
+ * enum qca_vendor_wlan_sta_guard_interval - Station guard interval
+ * @QCA_VENDOR_WLAN_STA_GI_800_NS: Legacy normal guard interval
+ * @QCA_VENDOR_WLAN_STA_GI_400_NS: Legacy short guard interval
+ * @QCA_VENDOR_WLAN_STA_GI_1600_NS: Guard interval used by HE
+ * @QCA_VENDOR_WLAN_STA_GI_3200_NS: Guard interval used by HE
+ */
+enum qca_vendor_wlan_sta_guard_interval {
+ QCA_VENDOR_WLAN_STA_GI_800_NS = 0,
+ QCA_VENDOR_WLAN_STA_GI_400_NS = 1,
+ QCA_VENDOR_WLAN_STA_GI_1600_NS = 2,
+ QCA_VENDOR_WLAN_STA_GI_3200_NS = 3,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_get_sta_info - Defines attributes
+ * used by QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAC:
+ * Required attribute in request for AP mode only, 6-byte MAC address,
+ * corresponding to the station's MAC address for which information is
+ * requested. For STA mode this is not required as the info always correspond
+ * to the self STA and the current/last association.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_FLAGS:
+ * Optionally used in response, u32 attribute, contains a bitmap of different
+ * fields defined in enum qca_vendor_wlan_sta_flags, used in AP mode only.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_GUARD_INTERVAL:
+ * Optionally used in response, u32 attribute, possible values are defined in
+ * enum qca_vendor_wlan_sta_guard_interval, used in AP mode only.
+ * Guard interval used by the station.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_RETRY_COUNT:
+ * Optionally used in response, u32 attribute, used in AP mode only.
+ * Value indicates the number of data frames received from station with retry
+ * bit set to 1 in FC.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BC_MC_COUNT:
+ * Optionally used in response, u32 attribute, used in AP mode only.
+ * Counter for number of data frames with broadcast or multicast address in
+ * the destination address received from the station.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_SUCCEED:
+ * Optionally used in response, u32 attribute, used in both STA and AP modes.
+ * Value indicates the number of data frames successfully transmitted only
+ * after retrying the packets and for which the TX status has been updated
+ * back to host from target.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_EXHAUSTED:
+ * Optionally used in response, u32 attribute, used in both STA and AP mode.
+ * Value indicates the number of data frames not transmitted successfully even
+ * after retrying the packets for the number of times equal to the total number
+ * of retries allowed for that packet and for which the TX status has been
+ * updated back to host from target.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_TOTAL:
+ * Optionally used in response, u32 attribute, used in AP mode only.
+ * Counter in the target for the number of data frames successfully transmitted
+ * to the station.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY:
+ * Optionally used in response, u32 attribute, used in AP mode only.
+ * Value indicates the number of data frames successfully transmitted only
+ * after retrying the packets.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY_EXHAUSTED:
+ * Optionally used in response, u32 attribute, used in both STA & AP mode.
+ * Value indicates the number of data frames not transmitted successfully even
+ * after retrying the packets for the number of times equal to the total number
+ * of retries allowed for that packet.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_PROBE_REQ_BMISS_COUNT: u32, used in
+ * the STA mode only. Represent the number of probe requests sent by the STA
+ * while attempting to roam on missing certain number of beacons from the
+ * connected AP. If queried in the disconnected state, this represents the
+ * count for the last connected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_PROBE_RESP_BMISS_COUNT: u32, used in
+ * the STA mode. Represent the number of probe responses received by the station
+ * while attempting to roam on missing certain number of beacons from the
+ * connected AP. When queried in the disconnected state, this represents the
+ * count when in last connected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_ALL_COUNT: u32, used in the
+ * STA mode only. Represents the total number of frames sent out by STA
+ * including Data, ACK, RTS, CTS, Control Management. This data is maintained
+ * only for the connect session. Represents the count of last connected session,
+ * when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_COUNT: u32, used in the STA mode.
+ * Total number of RTS sent out by the STA. This data is maintained per connect
+ * session. Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_RETRY_FAIL_COUNT: u32, used in the
+ * STA mode.Represent the number of RTS transmission failure that reach retry
+ * limit. This data is maintained per connect session. Represents the count of
+ * last connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_NON_AGGREGATED_COUNT: u32, used in
+ * the STA mode. Represent the total number of non aggregated frames transmitted
+ * by the STA. This data is maintained per connect session. Represents the count
+ * of last connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_AGGREGATED_COUNT: u32, used in the
+ * STA mode. Represent the total number of aggregated frames transmitted by the
+ * STA. This data is maintained per connect session. Represents the count of
+ * last connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_GOOD_PLCP_COUNT: u32, used in
+ * the STA mode. Represents the number of received frames with a good PLCP. This
+ * data is maintained per connect session. Represents the count of last
+ * connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_INVALID_DELIMITER_COUNT: u32,
+ * used in the STA mode. Represents the number of occasions that no valid
+ * delimiter is detected by A-MPDU parser. This data is maintained per connect
+ * session. Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_CRC_FAIL_COUNT: u32, used in the
+ * STA mode. Represents the number of frames for which CRC check failed in the
+ * MAC. This data is maintained per connect session. Represents the count of
+ * last connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_ACKS_GOOD_FCS_COUNT: u32, used in the
+ * STA mode. Represents the number of unicast ACKs received with good FCS. This
+ * data is maintained per connect session. Represents the count of last
+ * connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BLOCKACK_COUNT: u32, used in the STA
+ * mode. Represents the number of received Block Acks. This data is maintained
+ * per connect session. Represents the count of last connected session, when
+ * queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BEACON_COUNT: u32, used in the STA
+ * mode. Represents the number of beacons received from the connected BSS. This
+ * data is maintained per connect session. Represents the count of last
+ * connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_OTHER_BEACON_COUNT: u32, used in the
+ * STA mode. Represents the number of beacons received by the other BSS when in
+ * connected state (through the probes done by the STA). This data is maintained
+ * per connect session. Represents the count of last connected session, when
+ * queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_UCAST_DATA_GOOD_FCS_COUNT: u64, used in
+ * the STA mode. Represents the number of received DATA frames with good FCS and
+ * matching Receiver Address when in connected state. This data is maintained
+ * per connect session. Represents the count of last connected session, when
+ * queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_DATA_BC_MC_DROP_COUNT: u32, used in the
+ * STA mode. Represents the number of RX Data multicast frames dropped by the HW
+ * when in the connected state. This data is maintained per connect session.
+ * Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_1MBPS: u32, used in the
+ * STA mode. This represents the target power in dBm for the transmissions done
+ * to the AP in 2.4 GHz at 1 Mbps (DSSS) rate. This data is maintained per
+ * connect session. Represents the count of last connected session, when
+ * queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_6MBPS: u32, used in the
+ * STA mode. This represents the Target power in dBm for transmissions done to
+ * the AP in 2.4 GHz at 6 Mbps (OFDM) rate. This data is maintained per connect
+ * session. Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_MCS0: u32, used in the
+ * STA mode. This represents the Target power in dBm for transmissions done to
+ * the AP in 2.4 GHz at MCS0 rate. This data is maintained per connect session.
+ * Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_6MBPS: u32, used in the
+ * STA mode. This represents the Target power in dBm for transmissions done to
+ * the AP in 5 GHz at 6 Mbps (OFDM) rate. This data is maintained per connect
+ * session. Represents the count of last connected session, when queried in
+ * the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_MCS0: u32, used in the
+ * STA mode. This represents the Target power in dBm for for transmissions done
+ * to the AP in 5 GHz at MCS0 rate. This data is maintained per connect session.
+ * Represents the count of last connected session, when queried in the
+ * disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_HW_BUFFERS_OVERFLOW_COUNT: u32, used
+ * in the STA mode. This represents the Nested attribute representing the
+ * overflow counts of each receive buffer allocated to the hardware during the
+ * STA's connection. The number of hw buffers might vary for each WLAN
+ * solution and hence this attribute represents the nested array of all such
+ * HW buffer count. This data is maintained per connect session. Represents
+ * the count of last connected session, when queried in the disconnected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX_TX_POWER: u32, Max TX power (dBm)
+ * allowed as per the regulatory requirements for the current or last connected
+ * session. Used in the STA mode.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_POWER: u32, Latest TX power
+ * (dBm) used by the station in its latest unicast frame while communicating
+ * to the AP in the connected state. When queried in the disconnected state,
+ * this represents the TX power used by the STA with last AP communication
+ * when in connected state.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ANI_LEVEL: u32, Adaptive noise immunity
+ * level used to adjust the RX sensitivity. Represents the current ANI level
+ * when queried in the connected state. When queried in the disconnected
+ * state, this corresponds to the latest ANI level at the instance of
+ * disconnection.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_IES: Binary attribute containing
+ * the raw information elements from Beacon frames. Represents the Beacon frames
+ * of the current BSS in the connected state. When queried in the disconnected
+ * state, these IEs correspond to the last connected BSSID.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PROBE_RESP_IES: Binary attribute
+ * containing the raw information elements from Probe Response frames.
+ * Represents the Probe Response frames of the current BSS in the connected
+ * state. When queried in the disconnected state, these IEs correspond to the
+ * last connected BSSID.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_GET_STA_DRIVER_DISCONNECT_REASON: u32, Driver
+ * disconnect reason for the last disconnection if the disconnection is
+ * triggered from the host driver. The values are referred from
+ * enum qca_disconnect_reason_codes.
+ */
+enum qca_wlan_vendor_attr_get_sta_info {
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAC = 1,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_FLAGS = 2,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_GUARD_INTERVAL = 3,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_RETRY_COUNT = 4,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BC_MC_COUNT = 5,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_SUCCEED = 6,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RETRY_EXHAUSTED = 7,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_TOTAL = 8,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY = 9,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_RETRY_EXHAUSTED = 10,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_PROBE_REQ_BMISS_COUNT = 11,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_PROBE_RESP_BMISS_COUNT = 12,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_TX_ALL_COUNT = 13,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_COUNT = 14,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_RTS_RETRY_FAIL_COUNT = 15,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_NON_AGGREGATED_COUNT = 16,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TX_DATA_AGGREGATED_COUNT = 17,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_GOOD_PLCP_COUNT = 18,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_INVALID_DELIMITER_COUNT = 19,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_FRAMES_CRC_FAIL_COUNT = 20,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_ACKS_GOOD_FCS_COUNT = 21,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BLOCKACK_COUNT = 22,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_BEACON_COUNT = 23,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_OTHER_BEACON_COUNT = 24,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_UCAST_DATA_GOOD_FCS_COUNT = 25,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_DATA_BC_MC_DROP_COUNT = 26,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_1MBPS = 27,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_6MBPS = 28,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_24G_MCS0 = 29,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_6MBPS = 30,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_TARGET_POWER_5G_MCS0 = 31,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_RX_HW_BUFFERS_OVERFLOW_COUNT = 32,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX_TX_POWER = 33,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_LATEST_TX_POWER = 34,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_ANI_LEVEL = 35,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_BEACON_IES = 36,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_PROBE_RESP_IES = 37,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_DRIVER_DISCONNECT_REASON = 38,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_GET_STA_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_update_sta_info - Defines attributes
+ * used by QCA_NL80211_VENDOR_SUBCMD_UPDATE_STA_INFO vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_CONNECT_CHANNELS: Type is NLA_UNSPEC.
+ * Used in STA mode. This attribute represents the list of channel center
+ * frequencies in MHz (u32) the station has learnt during the last connection
+ * or roaming attempt. This information shall not signify the channels for
+ * an explicit scan request from the user space. Host drivers can update this
+ * information to the user space in both connected and disconnected state.
+ * In the disconnected state this information shall signify the channels
+ * scanned in the last connection/roam attempt that lead to the disconnection.
+ */
+enum qca_wlan_vendor_attr_update_sta_info {
+ QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_CONNECT_CHANNELS = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_MAX =
+ QCA_WLAN_VENDOR_ATTR_UPDATE_STA_INFO_AFTER_LAST - 1,
+};
+
+/**
+ * enum qca_disconnect_reason_codes - Specifies driver disconnect reason codes.
+ * Used when the driver triggers the STA to disconnect from the AP.
+ *
+ * @QCA_DISCONNECT_REASON_UNSPECIFIED: The host driver triggered the
+ * disconnection with the AP due to unspecified reasons.
+ *
+ * @QCA_DISCONNECT_REASON_INTERNAL_ROAM_FAILURE: The host driver triggered the
+ * disconnection with the AP due to a roaming failure. This roaming is triggered
+ * internally (host driver/firmware).
+ *
+ * @QCA_DISCONNECT_REASON_EXTERNAL_ROAM_FAILURE: The driver disconnected from
+ * the AP when the user/external triggered roaming fails.
+ *
+ * @QCA_DISCONNECT_REASON_GATEWAY_REACHABILITY_FAILURE: This reason code is used
+ * by the host driver whenever gateway reachability failure is detected and the
+ * driver disconnects with AP.
+ *
+ * @QCA_DISCONNECT_REASON_UNSUPPORTED_CHANNEL_CSA: The driver disconnected from
+ * the AP on a channel switch announcement from it with an unsupported channel.
+ *
+ * @QCA_DISCONNECT_REASON_OPER_CHANNEL_DISABLED_INDOOR: On a concurrent AP start
+ * with indoor channels disabled and if the STA is connected on one of these
+ * disabled channels, the host driver disconnected the STA with this reason
+ * code.
+ *
+ * @QCA_DISCONNECT_REASON_OPER_CHANNEL_USER_DISABLED: Disconnection due to an
+ * explicit request from the user to disable the current operating channel.
+ *
+ * @QCA_DISCONNECT_REASON_DEVICE_RECOVERY: STA disconnected from the AP due to
+ * the internal host driver/firmware recovery.
+ *
+ * @QCA_DISCONNECT_REASON_KEY_TIMEOUT: The driver triggered the disconnection on
+ * a timeout for the key installations from the user space.
+ *
+ * @QCA_DISCONNECT_REASON_OPER_CHANNEL_BAND_CHANGE: The dDriver disconnected the
+ * STA on a band change request from the user space to a different band from the
+ * current operation channel/band.
+ *
+ * @QCA_DISCONNECT_REASON_IFACE_DOWN: The STA disconnected from the AP on an
+ * interface down trigger from the user space.
+ *
+ * @QCA_DISCONNECT_REASON_PEER_XRETRY_FAIL: The host driver disconnected the
+ * STA on getting continuous transmission failures for multiple Data frames.
+ *
+ * @QCA_DISCONNECT_REASON_PEER_INACTIVITY: The STA does a keep alive
+ * notification to the AP by transmitting NULL/G-ARP frames. This disconnection
+ * represents inactivity from AP on such transmissions.
+
+ * @QCA_DISCONNECT_REASON_SA_QUERY_TIMEOUT: This reason code is used on
+ * disconnection when SA Query times out (AP does not respond to SA Query).
+ *
+ * @QCA_DISCONNECT_REASON_BEACON_MISS_FAILURE: The host driver disconnected the
+ * STA on missing the beacons continuously from the AP.
+ *
+ * @QCA_DISCONNECT_REASON_CHANNEL_SWITCH_FAILURE: Disconnection due to STA not
+ * able to move to the channel mentioned by the AP in CSA.
+ *
+ * @QCA_DISCONNECT_REASON_USER_TRIGGERED: User triggered disconnection.
+ */
+enum qca_disconnect_reason_codes {
+ QCA_DISCONNECT_REASON_UNSPECIFIED = 0,
+ QCA_DISCONNECT_REASON_INTERNAL_ROAM_FAILURE = 1,
+ QCA_DISCONNECT_REASON_EXTERNAL_ROAM_FAILURE = 2,
+ QCA_DISCONNECT_REASON_GATEWAY_REACHABILITY_FAILURE = 3,
+ QCA_DISCONNECT_REASON_UNSUPPORTED_CHANNEL_CSA = 4,
+ QCA_DISCONNECT_REASON_OPER_CHANNEL_DISABLED_INDOOR = 5,
+ QCA_DISCONNECT_REASON_OPER_CHANNEL_USER_DISABLED = 6,
+ QCA_DISCONNECT_REASON_DEVICE_RECOVERY = 7,
+ QCA_DISCONNECT_REASON_KEY_TIMEOUT = 8,
+ QCA_DISCONNECT_REASON_OPER_CHANNEL_BAND_CHANGE = 9,
+ QCA_DISCONNECT_REASON_IFACE_DOWN = 10,
+ QCA_DISCONNECT_REASON_PEER_XRETRY_FAIL = 11,
+ QCA_DISCONNECT_REASON_PEER_INACTIVITY = 12,
+ QCA_DISCONNECT_REASON_SA_QUERY_TIMEOUT = 13,
+ QCA_DISCONNECT_REASON_BEACON_MISS_FAILURE = 14,
+ QCA_DISCONNECT_REASON_CHANNEL_SWITCH_FAILURE = 15,
+ QCA_DISCONNECT_REASON_USER_TRIGGERED = 16,
+};
+
+/**
+ * enum qca_wlan_vendor_attr_driver_disconnect_reason - Defines attributes
+ * used by %QCA_NL80211_VENDOR_SUBCMD_DRIVER_DISCONNECT_REASON vendor command.
+ *
+ * @QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASCON_CODE: u32 attribute.
+ * This attribute represents the driver specific reason codes (local
+ * driver/firmware initiated reasons for disconnection) defined
+ * in enum qca_disconnect_reason_codes.
+ */
+enum qca_wlan_vendor_attr_driver_disconnect_reason {
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_INVALID = 0,
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASCON_CODE = 1,
+
+ /* keep last */
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST,
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_MAX =
+ QCA_WLAN_VENDOR_ATTR_DRIVER_DISCONNECT_REASON_AFTER_LAST - 1,
+};
+
#endif /* QCA_VENDOR_H */
diff --git a/qcwcn/wifi_hal/roam.cpp b/qcwcn/wifi_hal/roam.cpp
index 2e3f214..047df5a 100644
--- a/qcwcn/wifi_hal/roam.cpp
+++ b/qcwcn/wifi_hal/roam.cpp
@@ -104,7 +104,7 @@
goto cleanup;
ret = roamCommand->put_u32(QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD,
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SET_BLACKLIST_BSSID);
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_BLACKLIST_BSSID);
if (ret != WIFI_SUCCESS)
goto cleanup;
@@ -189,7 +189,7 @@
}
ret = roamCommand->put_u32(QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD,
- QCA_WLAN_VENDOR_ATTR_ROAM_SUBCMD_SSID_WHITE_LIST);
+ QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_WHITE_LIST);
if (ret != WIFI_SUCCESS)
goto cleanup;
ret = roamCommand->put_u32(QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID, id);
diff --git a/qcwcn/wifi_hal/wifi_hal.cpp b/qcwcn/wifi_hal/wifi_hal.cpp
index 3b21a0e..7b85099 100644
--- a/qcwcn/wifi_hal/wifi_hal.cpp
+++ b/qcwcn/wifi_hal/wifi_hal.cpp
@@ -571,7 +571,10 @@
fn->wifi_select_tx_power_scenario = wifi_select_tx_power_scenario;
fn->wifi_reset_tx_power_scenario = wifi_reset_tx_power_scenario;
fn->wifi_set_radio_mode_change_handler = wifi_set_radio_mode_change_handler;
+ fn->wifi_virtual_interface_create = wifi_virtual_interface_create;
+ fn->wifi_virtual_interface_delete = wifi_virtual_interface_delete;
fn->wifi_set_latency_mode = wifi_set_latency_mode;
+ fn->wifi_set_thermal_mitigation_mode = wifi_set_thermal_mitigation_mode;
return WIFI_SUCCESS;
}
@@ -880,7 +883,7 @@
}
ALOGV("Initialized Wifi HAL Successfully; vendor cmd = %d Supported"
- " features : %x", NL80211_CMD_VENDOR, info->supported_feature_set);
+ " features : 0x%" PRIx64, NL80211_CMD_VENDOR, info->supported_feature_set);
cld80211_cleanup:
if (status != 0 || ret != WIFI_SUCCESS) {
@@ -1041,6 +1044,9 @@
hal_info *info = getHalInfo(handle);
info->cleaned_up_handler = handler;
info->clean_up = true;
+ // Remove the dynamically created interface during wifi cleanup.
+ wifi_cleanup_dynamic_ifaces(handle);
+
TEMP_FAILURE_RETRY(write(info->exit_sockets[0], "E", 1));
ALOGI("Sent msg on exit sock to unblock poll()");
@@ -1744,7 +1750,8 @@
static bool is_wifi_interface(const char *name)
{
- if (strncmp(name, "wlan", 4) != 0 && strncmp(name, "p2p", 3) != 0) {
+ if (strncmp(name, "wlan", 4) != 0 && strncmp(name, "p2p", 3) != 0
+ && strncmp(name, "wifi", 4) != 0) {
/* not a wifi interface; ignore it */
return false;
} else {
@@ -1855,10 +1862,10 @@
ret = acquire_supported_features(iface, set);
if (ret != WIFI_SUCCESS) {
*set = info->supported_feature_set;
- ALOGV("Supported feature set acquired at initialization : %x", *set);
+ ALOGV("Supported feature set acquired at initialization : 0x%" PRIx64, *set);
} else {
info->supported_feature_set = *set;
- ALOGV("Supported feature set acquired : %x", *set);
+ ALOGV("Supported feature set acquired : 0x%" PRIx64, *set);
}
return WIFI_SUCCESS;
}
diff --git a/qcwcn/wifi_hal/wificonfig.cpp b/qcwcn/wifi_hal/wificonfig.cpp
index a2f0fb3..8ab296a 100644
--- a/qcwcn/wifi_hal/wificonfig.cpp
+++ b/qcwcn/wifi_hal/wificonfig.cpp
@@ -33,6 +33,9 @@
#include <errno.h>
#include <stdlib.h>
#include <unistd.h>
+#include <string>
+#include <net/if.h>
+#include <vector>
#include "wificonfigcommand.h"
/* Implementation of the API functions exposed in wifi_config.h */
@@ -471,7 +474,7 @@
/* Check Supported low-latency capability */
if (!(info->supported_feature_set & WIFI_FEATURE_SET_LATENCY_MODE)) {
- ALOGE("%s: Set latency mode feature not supported %x", __FUNCTION__,
+ ALOGE("%s: Set latency mode feature not supported 0x%" PRIx64, __FUNCTION__,
info->supported_feature_set);
return WIFI_ERROR_NOT_SUPPORTED;
}
@@ -546,6 +549,111 @@
return ret;
}
+wifi_error wifi_set_thermal_mitigation_mode(wifi_handle handle,
+ wifi_thermal_mode mode,
+ u32 completion_window)
+{
+ wifi_error ret;
+ WiFiConfigCommand *wifiConfigCommand;
+ struct nlattr *nlData;
+ u32 qca_vendor_thermal_level;
+ hal_info *info = getHalInfo(handle);
+
+ if (!info || info->num_interfaces < 1) {
+ ALOGE("%s: Error wifi_handle NULL or base wlan interface not present",
+ __FUNCTION__);
+ return WIFI_ERROR_UNKNOWN;
+ }
+
+ wifiConfigCommand = new WiFiConfigCommand(
+ handle,
+ 1,
+ OUI_QCA,
+ QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD);
+ if (wifiConfigCommand == NULL) {
+ ALOGE("%s: Error, Failed to create wifiConfigCommand", __FUNCTION__);
+ return WIFI_ERROR_UNKNOWN;
+ }
+
+ /* Create the NL message. */
+ ret = wifiConfigCommand->create();
+ if (ret != WIFI_SUCCESS) {
+ ALOGE("Failed to create thermal vendor command, Error:%d", ret);
+ goto cleanup;
+ }
+
+ /* Set the interface Id of the message. */
+ if (wifiConfigCommand->put_u32(NL80211_ATTR_IFINDEX,
+ info->interfaces[0]->id)) {
+ ALOGE("%s: Failed to put iface id", __FUNCTION__);
+ goto cleanup;
+ }
+
+ nlData = wifiConfigCommand->attr_start(NL80211_ATTR_VENDOR_DATA);
+ if (!nlData) {
+ ALOGE("%s: Failed in attr_start for VENDOR_DATA, Error:%d",
+ __FUNCTION__, ret);
+ goto cleanup;
+ }
+
+ if (wifiConfigCommand->put_u32(QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_VALUE,
+ QCA_WLAN_VENDOR_ATTR_THERMAL_CMD_TYPE_SET_LEVEL)) {
+ ALOGE("Failed to put THERMAL_LEVEL command type");
+ goto cleanup;
+ }
+
+ switch(mode) {
+ case WIFI_MITIGATION_NONE:
+ qca_vendor_thermal_level = QCA_WLAN_VENDOR_THERMAL_LEVEL_NONE;
+ break;
+ case WIFI_MITIGATION_LIGHT:
+ qca_vendor_thermal_level = QCA_WLAN_VENDOR_THERMAL_LEVEL_LIGHT;
+ break;
+ case WIFI_MITIGATION_MODERATE:
+ qca_vendor_thermal_level = QCA_WLAN_VENDOR_THERMAL_LEVEL_MODERATE;
+ break;
+ case WIFI_MITIGATION_SEVERE:
+ qca_vendor_thermal_level = QCA_WLAN_VENDOR_THERMAL_LEVEL_SEVERE;
+ break;
+ case WIFI_MITIGATION_CRITICAL:
+ qca_vendor_thermal_level = QCA_WLAN_VENDOR_THERMAL_LEVEL_CRITICAL;
+ break;
+ case WIFI_MITIGATION_EMERGENCY:
+ qca_vendor_thermal_level = QCA_WLAN_VENDOR_THERMAL_LEVEL_EMERGENCY;
+ break;
+ default:
+ ALOGE("Unknown thermal mitigation level %d", mode);
+ ret = WIFI_ERROR_UNKNOWN;
+ goto cleanup;
+ }
+
+ if (wifiConfigCommand->put_u32(
+ QCA_WLAN_VENDOR_ATTR_THERMAL_LEVEL,
+ qca_vendor_thermal_level)) {
+ ALOGE("Failed to put thermal level");
+ goto cleanup;
+ }
+
+ if (wifiConfigCommand->put_u32(
+ QCA_WLAN_VENDOR_ATTR_THERMAL_COMPLETION_WINDOW,
+ completion_window)) {
+ ALOGE("Failed to put thermal completion window");
+ goto cleanup;
+ }
+ wifiConfigCommand->attr_end(nlData);
+
+ wifiConfigCommand->waitForRsp(false);
+ ret = wifiConfigCommand->requestEvent();
+ if (ret != WIFI_SUCCESS) {
+ ALOGE("Failed to set thermal level with Error: %d", ret);
+ goto cleanup;
+ }
+
+cleanup:
+ delete wifiConfigCommand;
+ return ret;
+}
+
WiFiConfigCommand::WiFiConfigCommand(wifi_handle handle,
int id, u32 vendor_id,
u32 subcmd)
@@ -683,3 +791,121 @@
return res;
}
+static std::vector<std::string> added_ifaces;
+
+static bool is_dynamic_interface(const char * ifname)
+{
+ for (const auto& iface : added_ifaces) {
+ if (iface == std::string(ifname))
+ return true;
+ }
+ return false;
+}
+
+void wifi_cleanup_dynamic_ifaces(wifi_handle handle)
+{
+ int len = added_ifaces.size();
+ while (len--) {
+ wifi_virtual_interface_delete(handle, added_ifaces.front().c_str());
+ }
+ added_ifaces.clear(); // could be redundent. But to be on safe side.
+}
+
+wifi_error wifi_virtual_interface_create(wifi_handle handle,
+ const char* ifname,
+ wifi_interface_type iface_type)
+{
+ wifi_error ret;
+ WiFiConfigCommand *wifiConfigCommand;
+ u32 wlan0_id = if_nametoindex("wlan0");
+ if (!handle || !wlan0_id) {
+ ALOGE("%s: Error wifi_handle NULL or wlan0 not present", __FUNCTION__);
+ return WIFI_ERROR_UNKNOWN;
+ }
+
+ ALOGD("%s: ifname=%s create", __FUNCTION__, ifname);
+ // Do not create interface if already exist.
+ if (if_nametoindex(ifname))
+ return WIFI_SUCCESS;
+
+ wifiConfigCommand = new WiFiConfigCommand(handle, get_requestid(), 0, 0);
+ if (wifiConfigCommand == NULL) {
+ ALOGE("%s: Error wifiConfigCommand NULL", __FUNCTION__);
+ return WIFI_ERROR_UNKNOWN;
+ }
+
+ nl80211_iftype type;
+ switch(iface_type) {
+ case WIFI_INTERFACE_TYPE_STA: /* IfaceType:STA */
+ type = NL80211_IFTYPE_STATION;
+ break;
+ case WIFI_INTERFACE_TYPE_AP: /* IfaceType:AP */
+ type = NL80211_IFTYPE_AP;
+ break;
+ case WIFI_INTERFACE_TYPE_P2P: /* IfaceType:P2P */
+ type = NL80211_IFTYPE_P2P_DEVICE;
+ break;
+ case WIFI_INTERFACE_TYPE_NAN: /* IfaceType:NAN */
+ type = NL80211_IFTYPE_NAN;
+ break;
+ default:
+ ALOGE("%s: Wrong interface type %u", __FUNCTION__, iface_type);
+ ret = WIFI_ERROR_UNKNOWN;
+ goto done;
+ break;
+ }
+ wifiConfigCommand->create_generic(NL80211_CMD_NEW_INTERFACE);
+ wifiConfigCommand->put_u32(NL80211_ATTR_IFINDEX, wlan0_id);
+ wifiConfigCommand->put_string(NL80211_ATTR_IFNAME, ifname);
+ wifiConfigCommand->put_u32(NL80211_ATTR_IFTYPE, type);
+ /* Send the NL msg. */
+ wifiConfigCommand->waitForRsp(false);
+ ret = wifiConfigCommand->requestEvent();
+ if (ret != WIFI_SUCCESS) {
+ ALOGE("%s: requestEvent Error:%d", __FUNCTION__,ret);
+ }
+ // Update dynamic interface list
+ added_ifaces.push_back(std::string(ifname));
+
+done:
+ delete wifiConfigCommand;
+ return ret;
+}
+
+wifi_error wifi_virtual_interface_delete(wifi_handle handle,
+ const char* ifname)
+{
+ wifi_error ret;
+ WiFiConfigCommand *wifiConfigCommand;
+ u32 wlan0_id = if_nametoindex("wlan0");
+
+ if (!handle || !wlan0_id) {
+ ALOGE("%s: Error wifi_handle NULL or wlan0 not present", __FUNCTION__);
+ return WIFI_ERROR_UNKNOWN;
+ }
+
+ ALOGD("%s: ifname=%s delete", __FUNCTION__, ifname);
+ if (if_nametoindex(ifname) && !is_dynamic_interface(ifname)) {
+ // Do not remove interface if it was not added dynamically.
+ return WIFI_SUCCESS;
+ }
+ wifiConfigCommand = new WiFiConfigCommand(handle, get_requestid(), 0, 0);
+ if (wifiConfigCommand == NULL) {
+ ALOGE("%s: Error wifiConfigCommand NULL", __FUNCTION__);
+ return WIFI_ERROR_UNKNOWN;
+ }
+ wifiConfigCommand->create_generic(NL80211_CMD_DEL_INTERFACE);
+ wifiConfigCommand->put_u32(NL80211_ATTR_IFINDEX, if_nametoindex(ifname));
+ /* Send the NL msg. */
+ wifiConfigCommand->waitForRsp(false);
+ ret = wifiConfigCommand->requestEvent();
+ if (ret != WIFI_SUCCESS) {
+ ALOGE("%s: requestEvent Error:%d", __FUNCTION__,ret);
+ }
+ // Update dynamic interface list
+ added_ifaces.erase(std::remove(added_ifaces.begin(), added_ifaces.end(), std::string(ifname)),
+ added_ifaces.end());
+
+ delete wifiConfigCommand;
+ return ret;
+}
