| /* |
| * Copyright (C) 2008 The Android Open Source Project |
| * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <math.h> |
| #include <mdp_version.h> |
| #include "overlayUtils.h" |
| #include "overlayMdp.h" |
| #include "mdp_version.h" |
| |
| #define HSIC_SETTINGS_DEBUG 0 |
| |
| using namespace qdutils; |
| |
| static inline bool isEqual(float f1, float f2) { |
| return ((int)(f1*100) == (int)(f2*100)) ? true : false; |
| } |
| |
| namespace ovutils = overlay::utils; |
| namespace overlay { |
| |
| bool MdpCtrl::init(uint32_t fbnum) { |
| // FD init |
| if(!utils::openDev(mFd, fbnum, |
| Res::fbPath, O_RDWR)){ |
| ALOGE("Ctrl failed to init fbnum=%d", fbnum); |
| return false; |
| } |
| return true; |
| } |
| |
| void MdpCtrl::reset() { |
| utils::memset0(mOVInfo); |
| utils::memset0(mLkgo); |
| mOVInfo.id = MSMFB_NEW_REQUEST; |
| mLkgo.id = MSMFB_NEW_REQUEST; |
| mOrientation = utils::OVERLAY_TRANSFORM_0; |
| mDownscale = 0; |
| mForceSet = false; |
| #ifdef USES_POST_PROCESSING |
| mPPChanged = false; |
| memset(&mParams, 0, sizeof(struct compute_params)); |
| mParams.params.conv_params.order = hsic_order_hsc_i; |
| mParams.params.conv_params.interface = interface_rec601; |
| mParams.params.conv_params.cc_matrix[0][0] = 1; |
| mParams.params.conv_params.cc_matrix[1][1] = 1; |
| mParams.params.conv_params.cc_matrix[2][2] = 1; |
| #endif |
| } |
| |
| bool MdpCtrl::close() { |
| bool result = true; |
| if(MSMFB_NEW_REQUEST != static_cast<int>(mOVInfo.id)) { |
| if(!mdp_wrapper::unsetOverlay(mFd.getFD(), mOVInfo.id)) { |
| ALOGE("MdpCtrl close error in unset"); |
| result = false; |
| } |
| } |
| #ifdef USES_POST_PROCESSING |
| /* free allocated memory in PP */ |
| if (mOVInfo.overlay_pp_cfg.igc_cfg.c0_c1_data) |
| free(mOVInfo.overlay_pp_cfg.igc_cfg.c0_c1_data); |
| #endif |
| reset(); |
| |
| if(!mFd.close()) { |
| result = false; |
| } |
| |
| return result; |
| } |
| |
| void MdpCtrl::setSource(const utils::PipeArgs& args) { |
| setSrcWhf(args.whf); |
| |
| //TODO These are hardcoded. Can be moved out of setSource. |
| mOVInfo.transp_mask = 0xffffffff; |
| |
| //TODO These calls should ideally be a part of setPipeParams API |
| setFlags(args.mdpFlags); |
| setZ(args.zorder); |
| setIsFg(args.isFg); |
| setPlaneAlpha(args.planeAlpha); |
| setBlending(args.blending); |
| } |
| |
| void MdpCtrl::setCrop(const utils::Dim& d) { |
| setSrcRectDim(d); |
| } |
| |
| void MdpCtrl::setPosition(const overlay::utils::Dim& d) { |
| setDstRectDim(d); |
| } |
| |
| void MdpCtrl::setTransform(const utils::eTransform& orient) { |
| int rot = utils::getMdpOrient(orient); |
| setUserData(rot); |
| mOrientation = static_cast<utils::eTransform>(rot); |
| } |
| |
| void MdpCtrl::doTransform() { |
| setRotationFlags(); |
| utils::Whf whf = getSrcWhf(); |
| utils::Dim dim = getSrcRectDim(); |
| utils::preRotateSource(mOrientation, whf, dim); |
| setSrcWhf(whf); |
| setSrcRectDim(dim); |
| } |
| |
| void MdpCtrl::doDownscale() { |
| int mdpVersion = MDPVersion::getInstance().getMDPVersion(); |
| if(mdpVersion < MDSS_V5) { |
| mOVInfo.src_rect.x >>= mDownscale; |
| mOVInfo.src_rect.y >>= mDownscale; |
| mOVInfo.src_rect.w >>= mDownscale; |
| mOVInfo.src_rect.h >>= mDownscale; |
| } else if(MDPVersion::getInstance().supportsDecimation()) { |
| utils::getDecimationFactor(mOVInfo.src_rect.w, mOVInfo.src_rect.h, |
| mOVInfo.dst_rect.w, mOVInfo.dst_rect.h, mOVInfo.horz_deci, |
| mOVInfo.vert_deci); |
| } |
| } |
| |
| bool MdpCtrl::set() { |
| int mdpVersion = MDPVersion::getInstance().getMDPVersion(); |
| //deferred calcs, so APIs could be called in any order. |
| doTransform(); |
| utils::Whf whf = getSrcWhf(); |
| if(utils::isYuv(whf.format)) { |
| utils::normalizeCrop(mOVInfo.src_rect.x, mOVInfo.src_rect.w); |
| utils::normalizeCrop(mOVInfo.src_rect.y, mOVInfo.src_rect.h); |
| if(mdpVersion < MDSS_V5) { |
| utils::even_floor(mOVInfo.dst_rect.w); |
| utils::even_floor(mOVInfo.dst_rect.h); |
| } else if (mOVInfo.flags & MDP_DEINTERLACE) { |
| // For interlaced, crop.h should be 4-aligned |
| if (!(mOVInfo.flags & MDP_SOURCE_ROTATED_90) && |
| (mOVInfo.src_rect.h % 4)) |
| mOVInfo.src_rect.h = utils::aligndown(mOVInfo.src_rect.h, 4); |
| } |
| } else { |
| if (mdpVersion >= MDSS_V5) { |
| // Check for 1-pixel down-scaling |
| if (mOVInfo.src_rect.w - mOVInfo.dst_rect.w == 1) |
| mOVInfo.src_rect.w -= 1; |
| if (mOVInfo.src_rect.h - mOVInfo.dst_rect.h == 1) |
| mOVInfo.src_rect.h -= 1; |
| } |
| } |
| |
| doDownscale(); |
| |
| if(this->ovChanged() || mForceSet) { |
| mForceSet = false; |
| if(!mdp_wrapper::setOverlay(mFd.getFD(), mOVInfo)) { |
| ALOGE("MdpCtrl failed to setOverlay, restoring last known " |
| "good ov info"); |
| mdp_wrapper::dump("== Bad OVInfo is: ", mOVInfo); |
| mdp_wrapper::dump("== Last good known OVInfo is: ", mLkgo); |
| this->restore(); |
| return false; |
| } |
| this->save(); |
| } |
| |
| return true; |
| } |
| |
| bool MdpCtrl::get() { |
| mdp_overlay ov; |
| ov.id = mOVInfo.id; |
| if (!mdp_wrapper::getOverlay(mFd.getFD(), ov)) { |
| ALOGE("MdpCtrl get failed"); |
| return false; |
| } |
| mOVInfo = ov; |
| return true; |
| } |
| |
| //Update src format based on rotator's destination format. |
| void MdpCtrl::updateSrcFormat(const uint32_t& rotDestFmt) { |
| utils::Whf whf = getSrcWhf(); |
| whf.format = rotDestFmt; |
| setSrcWhf(whf); |
| } |
| |
| void MdpCtrl::dump() const { |
| ALOGE("== Dump MdpCtrl start =="); |
| mFd.dump(); |
| mdp_wrapper::dump("mOVInfo", mOVInfo); |
| ALOGE("== Dump MdpCtrl end =="); |
| } |
| |
| void MdpCtrl::getDump(char *buf, size_t len) { |
| ovutils::getDump(buf, len, "Ctrl", mOVInfo); |
| } |
| |
| void MdpData::dump() const { |
| ALOGE("== Dump MdpData start =="); |
| mFd.dump(); |
| mdp_wrapper::dump("mOvData", mOvData); |
| ALOGE("== Dump MdpData end =="); |
| } |
| |
| void MdpData::getDump(char *buf, size_t len) { |
| ovutils::getDump(buf, len, "Data", mOvData); |
| } |
| |
| void MdpCtrl3D::dump() const { |
| ALOGE("== Dump MdpCtrl start =="); |
| mFd.dump(); |
| ALOGE("== Dump MdpCtrl end =="); |
| } |
| |
| bool MdpCtrl::setVisualParams(const MetaData_t& data) { |
| bool needUpdate = false; |
| #ifdef USES_POST_PROCESSING |
| /* calculate the data */ |
| if (data.operation & PP_PARAM_HSIC) { |
| if (mParams.params.pa_params.hue != data.hsicData.hue) { |
| ALOGD_IF(HSIC_SETTINGS_DEBUG, |
| "Hue has changed from %d to %d", |
| mParams.params.pa_params.hue,data.hsicData.hue); |
| needUpdate = true; |
| } |
| |
| if (!isEqual(mParams.params.pa_params.sat, |
| data.hsicData.saturation)) { |
| ALOGD_IF(HSIC_SETTINGS_DEBUG, |
| "Saturation has changed from %f to %f", |
| mParams.params.pa_params.sat, |
| data.hsicData.saturation); |
| needUpdate = true; |
| } |
| |
| if (mParams.params.pa_params.intensity != data.hsicData.intensity) { |
| ALOGD_IF(HSIC_SETTINGS_DEBUG, |
| "Intensity has changed from %d to %d", |
| mParams.params.pa_params.intensity, |
| data.hsicData.intensity); |
| needUpdate = true; |
| } |
| |
| if (!isEqual(mParams.params.pa_params.contrast, |
| data.hsicData.contrast)) { |
| ALOGD_IF(HSIC_SETTINGS_DEBUG, |
| "Contrast has changed from %f to %f", |
| mParams.params.pa_params.contrast, |
| data.hsicData.contrast); |
| needUpdate = true; |
| } |
| |
| if (needUpdate) { |
| mParams.params.pa_params.hue = data.hsicData.hue; |
| mParams.params.pa_params.sat = data.hsicData.saturation; |
| mParams.params.pa_params.intensity = data.hsicData.intensity; |
| mParams.params.pa_params.contrast = data.hsicData.contrast; |
| mParams.params.pa_params.ops = MDP_PP_OPS_WRITE | MDP_PP_OPS_ENABLE; |
| mParams.operation |= PP_OP_PA; |
| } |
| } |
| |
| if (data.operation & PP_PARAM_SHARP2) { |
| if (mParams.params.sharp_params.strength != data.Sharp2Data.strength) { |
| needUpdate = true; |
| } |
| if (mParams.params.sharp_params.edge_thr != data.Sharp2Data.edge_thr) { |
| needUpdate = true; |
| } |
| if (mParams.params.sharp_params.smooth_thr != |
| data.Sharp2Data.smooth_thr) { |
| needUpdate = true; |
| } |
| if (mParams.params.sharp_params.noise_thr != |
| data.Sharp2Data.noise_thr) { |
| needUpdate = true; |
| } |
| |
| if (needUpdate) { |
| mParams.params.sharp_params.strength = data.Sharp2Data.strength; |
| mParams.params.sharp_params.edge_thr = data.Sharp2Data.edge_thr; |
| mParams.params.sharp_params.smooth_thr = |
| data.Sharp2Data.smooth_thr; |
| mParams.params.sharp_params.noise_thr = data.Sharp2Data.noise_thr; |
| mParams.params.sharp_params.ops = |
| MDP_PP_OPS_WRITE | MDP_PP_OPS_ENABLE; |
| mParams.operation |= PP_OP_SHARP; |
| } |
| } |
| |
| if (data.operation & PP_PARAM_IGC) { |
| if (mOVInfo.overlay_pp_cfg.igc_cfg.c0_c1_data == NULL){ |
| uint32_t *igcData |
| = (uint32_t *)malloc(2 * MAX_IGC_LUT_ENTRIES * sizeof(uint32_t)); |
| if (!igcData) { |
| ALOGE("IGC storage allocated failed"); |
| return false; |
| } |
| mOVInfo.overlay_pp_cfg.igc_cfg.c0_c1_data = igcData; |
| mOVInfo.overlay_pp_cfg.igc_cfg.c2_data |
| = igcData + MAX_IGC_LUT_ENTRIES; |
| } |
| |
| memcpy(mParams.params.igc_lut_params.c0, |
| data.igcData.c0, sizeof(uint16_t) * MAX_IGC_LUT_ENTRIES); |
| memcpy(mParams.params.igc_lut_params.c1, |
| data.igcData.c1, sizeof(uint16_t) * MAX_IGC_LUT_ENTRIES); |
| memcpy(mParams.params.igc_lut_params.c2, |
| data.igcData.c2, sizeof(uint16_t) * MAX_IGC_LUT_ENTRIES); |
| |
| mParams.params.igc_lut_params.ops |
| = MDP_PP_OPS_WRITE | MDP_PP_OPS_ENABLE; |
| mParams.operation |= PP_OP_IGC; |
| needUpdate = true; |
| } |
| |
| if (data.operation & PP_PARAM_VID_INTFC) { |
| mParams.params.conv_params.interface = |
| (interface_type) data.video_interface; |
| needUpdate = true; |
| } |
| |
| if (needUpdate) { |
| display_pp_compute_params(&mParams, &mOVInfo.overlay_pp_cfg); |
| mPPChanged = true; |
| } |
| #endif |
| return true; |
| } |
| |
| } // overlay |
